UPS - Riello - Aros - Master MPS
UPS - Riello - Aros - Master MPS
UPS - Riello - Aros - Master MPS
TYPE
Master
MPS
4 SmartGrid Flywheel
ready compatible
Supercaps Service
UPS 1st start
!
www.ups-riello.com
guaranteed, with every UPS working in
:
! the other parallel group via an external
parallel at the best load level possible to power rating. bypass, in order to continue to guarantee
• Parallel Systems Joiner (PSJ) load redundancy.
Allows two groups of UPS to be connected
'
in parallel whilst operating, in the event of
• UPS Group Synchroniser (UGS) maintenance (with no interruption to the
Allows two or more non-parallel UPS output), using a power coupling switch.
devices to remain synchronised even Should one of the UPS in one of the
during mains power failure. parallel groups fail, it is automatically
The UGS also enables a Riello UPS to be excluded.
synchronised with another power source The PSJ connects the remaining UPS, to
Battery
Battery
Battery
Battery
Battery
Load Load
Solution to ensure redundancy up to the distribution of the Solution to ensure redundancy of the power supply even during
power supply to the loads and improved STS operation. maintenance. *
Battery
Battery
Battery
Battery
Battery
Battery
Battery
UGS
Sinchroniser PSJ
Static Transfer
SWITCH SWITCH
Load 3
Load 1 Load 2 Load 1 Load 2
Static Transfer
SWITCH
Load 4
www.ups-riello.com
DIMENSIONS
1900
1400
1900
1900
1900
1400
1400
1400
74
0
74
0
74
0
80
0
74
0
80
0 4400 00
555 800 825 800 1070 1070 10
OPTIONS
DETAILS
#&Y~#7%+ SWBYP
@+??7@L+#& FAN FUSES
[#@+?L@L&
SWMB
@+==$?@L+?&
?L7#H@7&5+L
&|+$L
%#5575
INTERFACE
UGS
INTERFACE
=$5L}+
=+[7=
INTERFACE
#7=+L7
5#=
www.ups-riello.com
BATTERY BOX
1900
Dimensions
1400
1400
(mm) BB BB
BB
86 86
55 0 0 0 0 0
5 74 74 80
1900
Dimensions Dimensions
1400
1900
(mm) (mm)
TC
E
64 0 0
0 0 74 64
0 80
27
0 80
1900
Dimensions
1400
(mm)
64 0 0 80
0 74 64
0 80 0 80
0
www.ups-riello.com
MODELS MPM 10 BAT &&=V BAT MPM 20 BAT MPM 30 MPM 40 MPM 60 MPM 80 MPM 100
INPUT
Nominal voltage YOX XX <
Voltage tolerance XX<X}
Frequency
Soft start 0 - 100% in 120’’ (selectable)
Permitted frequency tolerance \
:::K
Standard equipment provided H
9
BYPASS
Nominal voltage 360-400-420 Vac three-phase + N
Nominal frequency XX\
K
OUTPUT
Nominal power (kVA) 10 20 30 40 60 80 100
Active power (kW) 9 Y 18 27 36 72 90
Number of phases 1
Nominal voltage 220 - 230 - 240 Vac single-phase + N (selectable)
Static stability ± 1%
Dynamic stability X
Voltage distortion < 1% with linear load / < 3% with non-linear load
Crest factor 3:1 lpeack/lrms
Frequency stability on battery XX
Frequency XX\
K
+
X:X9:X9X:
BATTERIES
Type <#5>=}>759?@
9&95 9H
Residual ripple voltage < 1%
Temperature compensation X<*@
Typical charge current 0.2 x C10
INFO FOR INSTALLATION
Weight without batteries (kg) 200 220 230 270 302 440 XX OX
800 x 800 x
Dimensions (WxDxH) (mm) *QX*XX 800 x 740 x 1400
1900
Remote signals dry contacts
Remote controls ESD and bypass
Communications Double RS232 + dry contacts + 2 slots for communications interface
+ X@}X@
Relative humidity
Colour [#5QX
Noise level at 1 m 60 dBA 62 dBA
IP rating IP20
& up to 98%
[5<XX}}7@ XX}XO}7@9&:7@7?XX 9
Standards
7=@7@7?XX 9%:7@7?XX Y
@
(Voltage Frequency Independent) VFI - SS - 111
with IEC 62040-3
Moving the UPS transpallet
BAT
Also available with internal batteries
www.ups-riello.com
MODELS MPT 10 BAT &=VBAT MPT 20 BAT MPT 30 MPT 40 MPT 60 MPT 80
INPUT
Nominal voltage YOX XX <
Voltage tolerance XX<X}
Frequency
Soft start 0 - 100% in 120’’ (selectable)
Permitted frequency tolerance \
:::K
Standard equipment provided H
9
BYPASS
Nominal voltage 360-400-420 Vac three-phase + N
Nominal frequency XX\
K
OUTPUT
Nominal power (kVA) 10 20 30 40 60 80
Active power (kW) 9 Y 18 27 36 72
Number of phases 3+N
Nominal voltage YOX XX < ?\
K
Static stability ± 1%
Dynamic stability X
Voltage distortion < 1% with linear load / < 3% with non-linear load
Crest factor 3:1 lpeack/lrms
Frequency stability on battery XX
Frequency XX\
K
+
X:X9:X9X:
BATTERIES
Type <#5>=}>759?@
9&95 9H
Residual ripple voltage < 1%
Temperature compensation X<}@
Typical charge current 0.2 x C10
INFO FOR INSTALLATION
Weight without batteries (kg) 228 241 Y YY 460 X
Dimensions (WxDxH) (mm) *QX*XX 800 x 740 x 1400
Remote signals dry contacts
Remote controls ESD and bypass
Communications Double RS232 + dry contacts + 2 slots for communications interface
+ X@}X@
Relative humidity
Colour [#5QX
Noise level at 1 m 60 dBA 62 dBA
IP rating IP20
& up to 98%
[5<XX}}7@ XX}XO}7@9&:7@7?XX 9
Standards
7=@7@7?XX 9%:7@7?XX Y
@
(Voltage Frequency Independent) VFI - SS - 111
with IEC 62040-3
Moving the UPS transpallet
BAT
Also available with internal batteries
www.ups-riello.com
MODELS MPT 100 MPT 120 MPT 160 MPT 200 MPT 800
INPUT
Nominal voltage YOX XX <
Voltage tolerance XX<X}
Frequency
Soft start 0 - 100% in 120’’ (selectable)
Permitted frequency tolerance \
:::K
Standard equipment provided H
9
BYPASS
Nominal voltage 360-400-420 Vac three-phase + N
Nominal frequency XX\
K
OUTPUT
Nominal power (kVA) 100 120 160 200 800
Active power (kW) 90 108 144 180 640
Number of phases 3+N
Nominal voltage YOX XX < ?\
K
Static stability ± 1%
Dynamic stability X
Voltage distortion < 1% with linear load / < 3% with non-linear load
Crest factor 3:1 lpeack/lrms
Frequency stability on battery XX
Frequency XX\
K
+
X:X9:X9X:
BATTERIES
Type <#5>=}>759?@
9&95 9H
Residual ripple voltage < 1%
Temperature compensation X<}@
Typical charge current 0.2 x C10
INFO FOR INSTALLATION
Weight (kg) 600 610 690 790 YXX
Dimensions (WxDxH) (mm) 800 x 800 x 1900 4400 x 1000 x 1900
Remote signals dry contacts
Remote controls ESD and bypass
Communications Double RS232 + dry contacts + 2 slots for communications interface
+ X@}X@
Relative humidity
Colour [#5QX
Noise level at 1 m
68 dBA 77 dBA
IP rating IP20
& up to 98%
DATMPTF2Y13GREN
www.ups-riello.com