Valvula

Dual Modular Safety
Shutoff Valves with

Proof of Closure Option
DMV eco Series

DMV-D eco Series
DMV-DLE eco Series
Two normally closed safety shutoff

valves in one housing; each with
the following approvals.
CSA Certified
• ANSI Z21.21 / CSA 6.5
• Marked C/I
• File # 157406
FM Approved
• Class 7411
• File # 3047863
Commonwealth of Massachusetts
Approved Product
• Approval code G1-1107-35
• Gas Safety Shutoff Valve
EU Gas Appliance Directive

• EN161
• CE-0085AN2801
AGA (Australian Gas Association)

• AS 4629
• Class 1
• File # 5038
Description - High and low gas pressure switches
Codes and Standards The DUNGS Dual Modular Valve (DMV) - Valve proving system
This product is intended for instal- eco combines two safety shutoff valves - 1" NPT Vent line adapter
lations covered by but not limited to in one compact housing, with an option
NFPA 37, NFPA 85, NFPA 86, CSA for Proof of Closure on valve two or both Application
B149.1, CSA B149.3 and CSA 149.6. valves. The DUNGS DMV eco is recommended
for industrial and commercial heating
DUNGS is an ISO 9001 Valve 1 (V1) of the DMV, DMV-D and aplications that require two safety shutoff
manufacturing facility. DMV-DLE series is fast opening and valves with or without Proof of Closure.
fast closing. Valve 2 (V2) of the DMV-D The DMV eco is suitable for dry natural
DMV Eco Sales Brochrue • P/N 264871 • Ed. 02/16
is fast opening, while V2 of the DMV-DLE gas, propane, butane, air and other
is slow-opening for smoother light-off. inert gases. Suitable for up to 0.1% by
Max. flow adjustment on V2 provides volume, dry H2S.
variable main flow on both models.
A “dry” gas has a dew point lower than
Internal profiles and compact design +15 °F and its relative humidity is less
optimize flow and provide a low pres- than 60 %.
sure drop.
Directly mounting the following DUNGS Viton versions available and suitable for
accessories creates a compact valve up to 1 % H2S and 100 % Humidity.
1…8 train without additional piping:
Specification
DMV Two normally closed safety shutoff valves in one housing. V1 and V2 are fast opening, fast closing.
DMV-D Two normally closed safety shutoff valves in one housing. V1 and V2 are fast opening, fast closing.
Adjustable max. flow on V2.
DMV-DLE Two normally closed safety shutoff valves in one housing. V1 fast opening, fast closing. V2 slow
opening, fast closing valve. Adjustable max. flow V2 and adjustable initial lift with V2.
DMV-D(LE) /60x Does not include any Proof Of Closure

DMV-D(LE) /62x Includes Proof of Closure on V2
DMV-D(LE) /63x Includes Proof of Closure both on V1 and V2
Specifications
Flange sizes 65 (2 1/2") 80 (3") 100 (4") 125 (5")
Connection flange as per DIN 2501 Part 1, to fit pre-weld flanges as per DIN 2633
(PN 16) DN 125, ISO 7005 - 1 (PN 16), or ISO 7005 - 2 (PN 16).
Max. operating pressure 7 PSI (500 mbar)
Max. body pressure 15 PSI (1000 mbar)
Max. close off pressure 7 PSI (500 mbar)
Electrical ratings (+10 % / -15 %) 110 - 120 VAC @ 50 - 60 Hz and 24 VDC. Part numbers listed on page 3.
220 - 240 VAC @ 50 - 60 Hz (P/N on request)
Enclosure rating NEMA Type 12 (NEMA Type 4 optional)
Electrical connection DIN-connector with 1/2” NPT conduit adapter (order separately)
Operating time 100 % duty cycle
Closing time <1s
Opening time (to max. flow) DMV-... V1 & V2 < 1 s
DMV-D… V1 & V2 < 1 s
DMV-DLE… V1 < 1 s; V2 Adjustable to approx. 10 to 20 s at 70 °F
Initial lift adjustment Adjustable on V2 DLE only; 0 to 70 % of total flow; 0 to 25% of stroke
Not available on 24 VDC Versions.
Max. flow adjustment Adjustable on V2 <10 to 100 % of total flow; <10 to 100% of stroke
Not available on 24 VDC Versions.
Materials in contact with gas Housing: Aluminium, Steel; free of non-ferrous metals
Sealings on valve seats: NBR-based rubber. Versions with FKM/Viton available
for corrosive gases.
Ambient temperature rating +5 °F to +140 °F (-15 °C to +60 °C) NBR Versions
+32 °F to +140 °F (0 °C to +60 °C) Viton Versions
Installation position Safety shut off valve from vertically upright to horizontal
Gas strainer (standard) Installed in the housing upstream V1 (23 mesh)
Proof of Closure option CPI 400 valve switch with indication lamps and SPDT interlock switch
Test ports / G 1/8 ISO 228 ports available on both sides. Each side has two ports upstream
Pressure switch mounting ports V1, one between V1 and V2, one downstream V2.
G 1/4 ISO 228 on both flanges, upstream of V1, downstream of V2
G 3/4" Port upstream V1 each side of the valve
Position indication option Visual Indicator (VI) to show valve position
Valve proving system VPS 504; mounts directly to either side of DMV
Vent line adapter 1" NPT Field mountable
Power Consumption with all coils energized (24 VDC/120 VAC & 230 VAC)
Inrush (VA) Operation (VA)
DMV-D(LE) 5065/11 eco 6xx 130 VA 32 VA
DMV-D(LE) 5125/11 eco 6xx 250 VA 50 VA 2…8
Dimensions inch (mm)
d Space requirement for replacing the solenoid

c
b
e a Adds 2.7"
f when CPI 400
is mounted
Type Connection Dimensions [inch] Weight

DN Dimensions [mm] [lbs]
[kg]
a b c d e f
DMV 5065/6xx eco DN 65 (2 1/2") 11.4 3.5 7.0 10.8 7.3 3.8 22.0
290 88 179 275 185 97 10,0
DMV 5080/6xx eco DN 80 (3") 12.2 4.1 9.7 14.6 7.9 4.3 35.9
310 104 246 370 200 109 16,3
DMV 5100/6xx eco DN 100 (4") 13.8 4.7 14.5 17.7 8.7 4.6 53.4
350 119 292 450 220 116 24,2
DMV 5125/6xx eco DN 125 (5") 15.7 5.6 13.0 19.7 10.0 4.9 69.9
400 142 329 500 255 125 31,7
DMV-D 5065/6xx eco DN 65 (2 1/2") 11.4 3.5 7.0 10.8 7.3 3.8 22.0
290 88 179 275 185 97 10,0
DMV-D 5080/6xx eco DN 80 (3") 12.2 4.1 9.7 14.6 7.9 4.3 35.9
310 104 246 370 200 109 16,3
DMV-D 5100/6xx eco DN 100 (4") 13.8 4.7 14.5 17.7 8.7 4.6 53.4
350 119 292 450 220 116 24,2
DMV-D 5125/6xx eco DN 125 (5") 15.7 5.6 13.0 19.7 10.0 4.9 69.9
400 142 329 500 255 125 31,7
DMV-DLE 5065/6xx eco DN 65 (2 1/2") 11.4 3.5 7.0 10.8 7.3 3.8 22.0
290 88 179 275 185 97 10,0
DMV-DLE 5080/6xx eco DN 80 (3") 12.2 4.1 10.4 14.6 7.9 4.3 36.4
310 104 265 370 200 109 16,5
DMV-DLE 5100/6xx eco DN 100 (4") 13.8 4.7 13.6 17.7 8.7 4.6 54.0
350 119 346 450 220 116 24,5
DMV-DLE 5125/6xx eco DN 125 (5") 15.7 5.6 15.2 19.7 10.0 4.9 70.6
3…8 400 142 387 500 255 125 32,0
Valve Type Pipe Size Coil No. Valve Voltage NEMA Proof of Order No.
Seat Type Closure
Material
DMV 5065/602 eco DN 65 (2 1/2") 1411/2P NBR 110 VAC 12 no 267158
DMV-DLE 5065/602 eco DN 65 (2 1/2") 1411/2PL NBR 110 VAC 12 no 267162
DMV 5065/622 eco DN 65 (2 1/2") 1411/2P NBR 110 VAC 12 V2 269335
DMV-DLE 5065/622 eco DN 65 (2 1/2") 1411/2PL NBR 110 VAC 12 V2 269337
DMV 5065/632 eco DN 65 (2 1/2") 1411/2P NBR 110 VAC 12 V1 & V2 269336
DMV-DLE 5065/632 eco DN 65 (2 1/2") 1411/2PL NBR 110 VAC 12 V1 & V2 267163
DMV 5065/602 eco DN 65 (2 1/2") 1411/2P NBR 24 VDC 12 no 267164
DMV 5065/622 eco DN 65 (2 1/2") 1411/2P NBR 24 VDC 12 V2 269338
DMV 5065/632 eco DN 65 (2 1/2") 1411/2P NBR 24 VDC 12 V1 & V2 269339
DMV 5080/602 eco DN 80 (3") 1511/2P NBR 110 VAC 12 no 267154
DMV-DLE 5080/602 eco DN 80 (3") 1511/2PL NBR 110 VAC 12 no 267165
DMV 5080/622 eco DN 80 (3") 1511/2P NBR 110 VAC 12 V2 269330
DMV-DLE 5080/622 eco DN 80 (3") 1511/2PL NBR 110 VAC 12 V2 269340
DMV 5080/632 eco DN 80 (3") 1511/2P NBR 110 VAC 12 V1 & V2 267155
DMV-DLE 5080/632 eco DN 80 (3") 1511/2PL NBR 110 VAC 12 V1 & V2 269341
DMV 5080/602 eco DN 80 (3") 1511/2P NBR 24 VDC 12 no 267166
DMV 5080/622 eco DN 80 (3") 1511/2P NBR 24 VDC 12 V2 267167
DMV 5080/632 eco DN 80 (3") 1511/2P NBR 24 VDC 12 V1 & V2 269342
4…8
Valve Type Pipe Size Coil No. Valve Voltage NEMA Proof of Order No.
Seat Type Closure
Material
DMV 5065/624 eco DN 65 (2 1/2") 1411/2P-4 NBR 110 VAC 4 V2 269397
DMV-DLE 5065/624 eco DN 65 (2 1/2") 1411/2PL-4 NBR 110 VAC 4 V2 269400
DMV 5065/634 eco DN 65 (2 1/2") 1411/2P-4 NBR 110 VAC 4 V1 & V2 269398
DMV-DLE 5065/634 eco DN 65 (2 1/2") 1411/2PL-4 NBR 110 VAC 4 V1 & V2 269401
DMV 5080/624 eco DN 80 (3") 1511/2P-4 NBR 110 VAC 4 V2 269387
DMV-DLE 5080/624 eco DN 80 (3") 1511/2PL-4 NBR 110 VAC 4 V2 268488
DMV 5080/634 eco DN 80 (3") 1511/2P-4 NBR 110 VAC 4 V1 & V2 269388
DMV-DLE 5080/634 eco DN 80 (3") 1511/2PL-4 NBR 110 VAC 4 V1 & V2 269403
DMV-5100/624 eco DN 100 (4") 1611/2P-4 NBR 110 VAC 4 V2 269394
DMV 5100/634 eco DN 100 (4") 1611/2P-4 NBR 110 VAC 4 V1 & V2 269395
DMV 5125/624 eco DN 125 (5") 1711/2P-4 NBR 110 VAC 4 V2 269390
DMV 5125/634 eco DN 125 (5") 1711/2P-4 NBR 110 VAC 4 V1 &V2 269391
Note: Viton versions available upon request
5…8
Valve Type Pipe Size Coil No. Valve Seat Voltage NEMA Type Proof of Order No.
Material Closure
DMV 5080/602 eco DN 80 (3") 1511/2P Viton 24 VDC 12 no 267171
DMV-5080/622 eco DN 80 (3") 1511/2P Viton 24 VDC 12 V2 269352
DMV-5080/632 eco DN 80 (3") 1511/2P Viton 24 VDC 12 V1 & V2 269353
DMV-5100/602 eco DN 100 (4") 1611/2P Viton 24 VDC 12 no 267172
DMV-5125/602 eco DN 125 (5") 1711/2P Viton 24 VDC 12 no 267173
Equipment variants of DMV double DMV 5065 - DMV 5125 X standard

solenoid valve, single-stage mode (X) on request
DMV & DMV-D* X - not possible
DMV-DLE* X
Strainer X
Gas pressure switch can be mounted:
on flange X
Possible using
a pipe nipple
downstream of sieve (X)
downstream of valve 2 (X)
Valve V1, double-seat X
Valve V2, double-seat X
Valves opening separately X
G 3/4 ignition gas flange can be mounted (X)
1" Vent line adapter (X)
* not available in 24 VDC
DMV Flange Accessories

Body Size Flange # of Holes Flange Stud size **Stud ***Gasket
Description per Flange Order No. Order No. Order No.
DN 65 2 1/2“ ISO Flanged 4 227139 M16x65 135930 267464
DN 65 2 1/2“ ISO to NPT 4 243690 M16x65 135930 267464
DN 80 3“ ISO Flanged 8 227140 M16x65 135930 267466
DN 80 3“ ISO to NPT 8 243219 M16x65 135930 267466
DN 100 4“ ISO Flanged 8 227141 M16x65 135930 267467
DN 125 5“ ISO Flanged 8 227142 M16x75 148830 267468
* When a control is used alone, one mating flange is needed for each end, for a total of two flanges. When one control is bolted to another, such as
an FRS to a DMV dual modular safety valve, one mating flange is needed for each end, for a total of two flanges.
** Includes one stud, two lock washers, and two nuts.
*** One seal needed for each flange.
6…8
Dual Modular Valve (DMV) system
Port 1
Port 2
Port 3
Port 4
Port 5
Port 9
V1 V2
Port 6 Port 7
DMV
Port 9 Port 5
Port 1
Port 2
Port 4
Port 3
Valve Valve
switch switch
Min. gas pressure switch Max. gas pressure switch
Valve proving system
Additional Accessories GAO/GMH/GML A2 pressure switch Adapters

• 1/4” NPT adapter (225047)
VPS 504 Position indication • 1/2” NPT Pilot gas adapter;
Valve proving system (approved by some CPI 400 with indication lamps and SPDT Check flow requirements. (225043)
authorities having jurisdiction in lieu of interlock switch, or Visual indicator (VI) • G 1/8” Test nipple (219008)
vent valve and “proof of closure” (e.g. • 1" NPT Vent line adapter (can be used
FM, NFPA 85, NFPA 86, CSA B149.3 DMK butterfly control valve as pilot take-off upstream V2)
and XL GAP). Mounts directly downstream of DMV to (243760)
modulate gas flow. Requires actuator. • 3/4" Pilot take-off available upstream
Use DMA actuator with DMK butterfly V2.
valve.
Pressure drop for other gases the “corrected” flow rate in CFH through f (f = 0.66 for propane). Use this “cor-
To determine the pressure drop when the valve for the other gas used. For ex- rected” flow rate and the flow curve on
using a gas other than natural gas, ample, when using propane, divide the the next page to determine pressure
use the flow formula below and f value volume (CFH) of propane required for drop for propane.
located in the table below to determine the application by the calculated value
Determining equivalent flow through valves using another gas
° ° Type of gas Density

Vgas used = V Natural gas x f [kg/m3]
s.g. f
Natural gas 0.81 0.65 1.00

Butane 2.39 1.95 0.58
Propane 1.86 1.50 0.66
Density of Natural gas Air 1.24 1.00 0.80
f= Density of gas used
7…8
Dual Modular Safety
Shutoff Valves with
Proof of Closure Option
DMV eco Series

DMV-D eco Series
DMV-DLE eco Series
Flow curve
Pressure drop (in. W.C.)
Based on 60 °F
14.65 psia, dry
40,000 60,000
Flow (CFH) of natural gas; s.g. 0.65 at 60 °F
We reserve the right to make any changes in the interest of technical progress.
Karl Dungs, Inc. Karl Dungs GmbH & Co. KG

3890 Pheasant Ridge Drive NE P.O. Box 12 29
Suite 150 D-73602 Schorndorf, Germany
Blaine, MN 55449, U.S.A. Phone +49 (0)7181-804-0
Phone 763 582-1700 Fax +49 (0)7181-804-166
Fax 763 582-1799 e-mail info@dungs.com
e-mail info@karldungsusa.com Internet http://www.dungs.com
Internet http://www.dungs.com/usa/ 8…8

Valvula

Uploaded by

Copyright:

Available Formats

Valvula

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Valvula

Uploaded by

Copyright:

Available Formats

Dual Modular Safety

Shutoff Valves with

DMV eco Series

Two normally closed safety shutoff

EU Gas Appliance Directive

AGA (Australian Gas Association)

DMV-D(LE) /60x Does not include any Proof Of Closure

d Space requirement for replacing the solenoid

Type Connection Dimensions [inch] Weight

Equipment variants of DMV double DMV 5065 - DMV 5125 X standard

DMV Flange Accessories

Valve proving system

Additional Accessories GAO/GMH/GML A2 pressure switch Adapters

Determining equivalent flow through valves using another gas

° ° Type of gas Density

Natural gas 0.81 0.65 1.00

f= Density of gas used

DMV eco Series

Flow (CFH) of natural gas; s.g. 0.65 at 60 °F

Karl Dungs, Inc. Karl Dungs GmbH & Co. KG

You might also like