®

Traditional systems - Angle standing seam (vertical design) 01

ASS V 4.1.04 Rear vented capping - rear 'T' plate.

B
4 1 5 6

A
1 5 6
≥

1
60mm minimum

10

≥20mm

All dimensions are indicative unless specified on the drawing

Scale 1/5 Sheet thickness may be exaggerated for clarity

Notes:
· 'A' shows the top return fold for traditional 'sheet' cladding. 1. elZinc® cladding
· 'B' shows the top return fold for long strip cladding. 2. Membrane
· Generic structural details are given for indicative purposes only. 3. Structural underlay
4. Folded galvanised steel profiles
5. elZinc® perforated sheet
6. elZinc® retention profile
7. Insulation
8. Wooden batten
9. Wall bracket
10. Substrate

elZinc® Asturiana de Laminados S.A.

The information contained in this document-drawing- has a purely informative function and been elaborated with the
intention of assisting building professionals in regard to the installation of elZinc® cladding systems.It is the responsability of Tel. +34 984 116 332 Pol. Ind. de Olloniego, Parcela C1
the architect, building contractor and installer in any case to ensure the validity of the specific details employed on each
project. Asla-elZinc® rejects any responsibility due to direct or indirect damage that may arise from the use of the Institut Bauen Fax. +34 985 493 202 33660 Olloniego Asturias, Spain
information contained in this document SUD und Umwelt e.V.
www.elzinc.es elzinc@aslazinc.com
 ®

Traditional systems - Angle standing seam (vertical design) 01

ASS V 4.1.04 Rear vented capping - rear 'T' plate.

B
1 2 3 5 6

A
1 2 3 5 6
≥

4
60mm minimum

10

≥20mm

All dimensions are indicative unless specified on the drawing

Scale 1/5 Sheet thickness may be exaggerated for clarity

Notes:
· 'A' shows the top return fold for traditional 'sheet' cladding. 1. elZinc® cladding
· 'B' shows the top return fold for long strip cladding. 2. Membrane
· Generic structural details are given for indicative purposes only. 3. Structural underlay
4. Folded galvanised steel profiles
5. elZinc® perforated sheet
6. elZinc® retention profile
7. Insulation
8. Wooden batten
9. Wall bracket
10. Substrate

elZinc® Asturiana de Laminados S.A.

The information contained in this document-drawing- has a purely informative function and been elaborated with the
intention of assisting building professionals in regard to the installation of elZinc® cladding systems.It is the responsability of Tel. +34 984 116 332 Pol. Ind. de Olloniego, Parcela C1
the architect, building contractor and installer in any case to ensure the validity of the specific details employed on each
project. Asla-elZinc® rejects any responsibility due to direct or indirect damage that may arise from the use of the Institut Bauen Fax. +34 985 493 202 33660 Olloniego Asturias, Spain
information contained in this document SUD und Umwelt e.V.
www.elzinc.es elzinc@aslazinc.com