Engine Performance - Test - Engine Speed: 320D and 323D Excavators Hydraulic System
Engine Performance - Test - Engine Speed: 320D and 323D Excavators Hydraulic System
Engine Performance - Test - Engine Speed: 320D and 323D Excavators Hydraulic System
Previous Screen
Product: EXCAVATOR
Model: 320D EXCAVATOR BZP
Configuration: 320D Excavator BZP00001-UP (MACHINE) POWERED BY C6.4 Engine
S/N - A6F1-UP
S/N - A8F1-UP
S/N - A9F1-UP
S/N - BYM1-UP
S/N - BZP1-UP
S/N - CWG1-UP
S/N - CXY1-UP
S/N - CYD1-UP
S/N - DHK1-UP
S/N - DKW1-UP
S/N - FAL1-UP
S/N - GDP1-UP
S/N - GTF1-UP
S/N - JFZ1-UP
S/N - JGZ1-UP
S/N - JLG1-UP
S/N - JPD1-UP
S/N - KGF1-UP
S/N - KHN1-UP
S/N - KLM1-UP
S/N - KZF1-UP
S/N - LFL1-UP
S/N - MCH1-UP
S/N - MDE1-UP
S/N - MGG1-UP
S/N - MZD1-UP
S/N - NDE1-UP
S/N - NES1-UP
S/N - NZF1-UP
S/N - PBE1-UP
S/N - PBM1-UP
S/N - PCX1-UP
S/N - PHX1-UP
S/N - RAC1-UP
S/N - SDC1-UP
S/N - SED1-UP
S/N - SPN1-UP
S/N - TDH1-UP
S/N - WBN1-UP
S/N - WGC1-UP
S/N - WNE1-UP
S/N - YSD1-UP
S/N - ZMF1-UP
Table 1
Required Tools
Part Number Description Qty
9U-7400 Multitach Tool Group 1
6. Read the engine speed display (rpm) on the multitach. Refer to Table 2 for the specifications for
engine speed at the desired engine operation.
Table 2
Specifications
Item
New Rebuild Service Limit
1880 ± 50 rpm (2) 1680 to 1930 rpm (1)
(1)
No load high idle
1980 ± 50 rpm (3) 1780 to 2030 rpm (3)
No load low idle 1000 ± 50 rpm 1000 ± 100 rpm
Maximum speed with load (4) 1760 ± 40 rpm 1670 rpm (5) 1620 rpm (5)
No load speed (6) 1300 ± 50 rpm 1300 ± 100 rpm
(1)
AEC switch in the OFF position
(2)
Three seconds after the engine speed dial was placed at position "10"
(3)
Engine rpm within three seconds after the engine speed dial was placed at position "10"
(4)
Pressure is relieved from both pumps (stall condition).
(5)
Minimum
(6)
AEC switch in the ON position
Note: A New specification is the performance that can be expected for a new machine. A Rebuild
specification is the performance that can be expected after rebuilding the components of a system.
Performance beyond the Service Limit is an indication of these problems: improper maintenance or
adjustment, component wear and failure.
Copyright 1993 - 2020 Caterpillar Inc. Tue Apr 7 05:41:42 UTC+0700 2020
All Rights Reserved.
Private Network For SIS Licensees.