Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Whitmore Det-900 Grease

    Uploaded by

    Don Howard
    Whitmore's DET 900 is a chemically inert, nonflammable grease designed for long life applications up to 400°F with minimal re-lubrication needed. It is resistant to most chemicals and offers superior resistance to "Lewis acids" found in semiconductor manufacturing. The grease can withstand higher temperatures up to 575°F if re-lubricated every 8-12 hours. It is compatible with many elastomers and plastics and is suitable for applications involving chemicals, high temperatures, or where long lubricant life is required such as bearings on industrial equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Whitmore Det-900 Grease

    Uploaded by

    Don Howard
    16 views1 page
    Whitmore's DET 900 is a chemically inert, nonflammable grease designed for long life applications up to 400°F with minimal re-lubrication needed. It is resistant to most chemicals and offers superior resistance to "Lewis acids" found in semiconductor manufacturing. The grease can withstand higher temperatures up to 575°F if re-lubricated every 8-12 hours. It is compatible with many elastomers and plastics and is suitable for applications involving chemicals, high temperatures, or where long lubricant life is required such as bearings on industrial equipment.

    Original Description:

    PFPE, PTFE, perfluoropolyether, extended use at 400F, Use up to 575F with 8-12 hour relubrication

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Whitmore's DET 900 is a chemically inert, nonflammable grease designed for long life applications up to 400°F with minimal re-lubrication needed. It is resistant to most chemicals and offers superior resistance to "Lewis acids" found in semiconductor manufacturing. The grease can withstand higher temperatures up to 575°F if re-lubricated every 8-12 hours. It is compatible with many elastomers and plastics and is suitable for applications involving chemicals, high temperatures, or where long lubricant life is required such as bearings on industrial equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views1 page

    Whitmore Det-900 Grease

    Uploaded by

    Don Howard
    Whitmore's DET 900 is a chemically inert, nonflammable grease designed for long life applications up to 400°F with minimal re-lubrication needed. It is resistant to most chemicals and offers superior resistance to "Lewis acids" found in semiconductor manufacturing. The grease can withstand higher temperatures up to 575°F if re-lubricated every 8-12 hours. It is compatible with many elastomers and plastics and is suitable for applications involving chemicals, high temperatures, or where long lubricant life is required such as bearings on industrial equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TECHNICAL DATA SHEET

    DET 900
    NON-REACTIVE GREASE
    Whitmore's DET 900 is a stable, nonflammable, chemically inert BENEFITS:
    grease designed for use in long life and sealed-for-life applications.
    It is inert to virtually all chemicals used in industry, is insoluble in • LOW EVAPORATION - compared to conventional synthetic
    most solvents, and relatively stable to radiation when compared to greases, an increase in lubricant life of 5 to 10 times can be
    achieved.
    conventional lubricants.
    This product is biologically inert and offers superior resistance to • CHEMICAL RESISTANCE - provides protection against most
    "Lewis acids," found in semiconductor manufacturing. aggressive chemicals that degrade conventional lubricants.
    • NONFLAMMABLE AND INERT - depending on the specific
    Whitmore's DET 900 will prove serviceable for long periods at chemicals involved, this grease can be considered for use in
    continuous temperatures up to 400°F (204°C) with minimal re- facilities that manufacture corrosive chemicals. Consult
    lubrication. DET 900 can withstand higher temperatures (up to Whitmore's Technical Services Department before using.
    575°F or 300°C). At 575°F re-lubrication is needed approximately • PAINT COMPATIBLE - since it is silicone-free, Whitmore's
    every 8 to 12 hours. DET 900 EP 2 is suitable for use in high temperature paint
    oven bearings.
    Ensure adequate ventilation when used at or above 535°F (280°C)
    • WIDE TEMPERATURE RANGE – can be used up to 575°F
    (300°C) with adequate re-lubrication and ventilation.
    Compatibility with elastomeric seal materials and plastics is
    excellent. This includes Buna N, Butyl 325, Neoprene, Nylon, and • ANTI-CORROSION - does not contain chlorine and will not
    Teflon. The limiting factor when using this grease is the thermal promote chloride-induced corrosion.
    stability of the elastomer or plastic.
    APPLICATIONS:
    Designed for use in any grease-lubricated applications where high
    temperatures, chemicals, or radiation create difficulties or where
    long lubricant life is required.
    Typical applications include bearings on hot air blowers, bearings
    on oven conveyors, and fan bearings on textile machines. Suitable
    for use in film stretching machines and will not react with plastic
    film.
    Suitable for use in systems that handle aliphatic, aromatic, or
    chlorinated hydrocarbons, gasoline, ketone, alcohol, ethers, or
    water.
    Partially soluble in trichlorotrifluoroethane. For more information,
    call Whitmore's Technical Service Department at 800-699-6318.
    ASTM # TYPICAL CHARACTERISTICS
    Grade EP 1 EP 2
    D-217 Cone Penetration (Worked) 310-340 265-295
    D-445 Kinematic Viscosity (Base Oil)
    cSt @ 40°C 510 510
    cSt @ 100°C 47 47
    D-2270 Viscosity Index (Base Oil) 134 134
    Gardner Density, lb/gl @ 77°F (25°C) 16.875 16.570
    Method
    D-1298 Specific Gravity 2.02 1.99
    D-2596 Four Ball EP
    Weld Point, kg >800 >800
    D-4048 Copper Strip Corrosion for Greases
    212°F (100°C) @ 3 hrs 1A 1A
    Oil Type Perfluoropolyether (PFPE) Perfluoropolyether (PFPE)
    Thickener Type Polytetrafluroethylene (PTFE) Polytetrafluroethylene (PTFE)
    The above are average values. Minor variations which do not affect product performance are to be expected in normal manufacturing.
    PACKAGING
    Cartridges
    For warranty information, scan the QR code.
    You can also email us at sales@whitmores.com
    Or write to the Sales Department at the address below.

    930 Whitmore Drive • Rockwall, Texas 75087 • USA • (972) 771-1000 • 800-699-6318
    An ISO 9001 and ISO 14001 registered company • www.whitmores.com

    TDS-2036 10-18-16 tm/kc

    You might also like