UNISONIC TECHNOLOGIES CO.

, LTD
MC34072 LINEAR INTEGRATED CIRCUIT

HIGH SLEW RATE, WIDE

BANDWIDTH , SINGLE
SUPPLY OPERATIONAL DIP-8

AMPLIFIER

SOP-8
 DESCRIPTION
The UTC MC34072 offer 4.5MHz of gain bandwidth product,
13V/s slew rate and fast setting time without the use of JFET
device technology. Although it can be operated from split supplies, MSOP-8
it is particularly suited for single supply operation, since the
common mode input voltage range includes ground potential (VEE).
With A Darlington input stage, it exhibits high input resistance, low
input offset voltage and high gain. The all NPN output stage, TSSOP-8
characterized by no deadband crossover distortion and large
output voltage swing, provides high capacitance drive capability,
excellent phase and gain margins, low open loop high frequency
output impedance and symmetrical source/sink AC frequency
response.

 FEATURES
* Wide bandwidth: 4.5 MHz
* High slew rate: 13V/μs
* Fast settling time:1.1μs to 0.1%
* Wide single supply operation: 3.0V to 44V
* Wide input common mode voltage range:
Includes ground (VEE)
* Low input offset voltage: 3.0mV maximum
* Large output voltage swing: -14.7V to +14V
(with +-15V supplies)
* Large capacitance drive Capability: 0pF to 10,000 pF
* Low total harmonic distortion: 0.02%
* Excellent phase margin: 60
* Excellent gain margin: 12dB
* Output short circuit protection

www.unisonic.com.tw 1 of 11
Copyright © 2018 Unisonic Technologies Co., Ltd QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT

 ORDERING INFORMATION
Ordering Number
Package Packing
Lead Free Plating Halogen Free
MC34072L-D08-T MC34072G-D08-T DIP-8 Tube
MC34072L-S08-R MC34072G-S08-R SOP-8 Tape Reel
MC34072L-SM1-R MC34072G-SM1-R MSOP-8 Tape Reel
MC34072L-P08-R MC34072G-P08-R TSSOP-8 Tape Reel

 MARKING
DIP-8 / SOP-8 / MSOP-8 TSSOP-8

UNISONIC TECHNOLOGIES CO., LTD 2 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT

 PIN DESCRIPTION

 REPRESENTATIVE SCHEMATIC DIAGRAM

UNISONIC TECHNOLOGIES CO., LTD 3 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT

 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

PARAMETER SYMBOL RATINGS UNIT
Supply Voltage (from VEE to VCC) VS +44 or ±22 V
Differential Input Voltage VI(DIFF) (Note 3) V
Input Voltage VIN (Note 3) V
Output Short Circuit Duration (Note 2) tSC Indefinite sec
Junction Temperature TJ +150 °C
Operating Temperature (Note 4) TOPR -40 ~ +85 °C
Storage Temperature Range TSTG -40~ +150 °C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
3. Either or both input voltages should not exceed the magnitude of VCC or VEE.
4. It is guarantee by design, not 100% be tested.
 ELECTRICAL CHARACTERISTICS
(VCC=+15V, VEE=-15V, RL=connected to ground, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
VCC=+15V,VEE=-15V,TA=+25C 0.5 3.0 mV
RS=100Ω,
VCC=+5V,VEE=0V, TA=+25C 0.5 3.0 mV
Input Offset Voltage VI(OFF) VCM=0V,
VCC=+15V,VEE=-15V,TA=0C to
VOUT=0V 5.0 mV
70C
Average Temperature
RS=10Ω,VCM=0V, VOUT =0V,
Coefficient of Input Offset VIO/T 10 μV/C
Ta=0C to 70C
Voltage
TA=+25C 100 500 nA
Input Bias Current II(BIAS) VCM=0V, VOUT =0V
TA=0C to 70C 700 nA
TA=+25C 6.0 50 nA
Input Offset Current II(OFF) VCM=0V, VOUT =0V
TA=0C to 70C 300 nA
TA=+25C VEE to (VCC –1.8) V
Input Common Mode Voltage VICR
TA=0C to 70C VEE to (VCC –2.2) V
TA=+25C 50 100 V/mV
Large Signal Voltage Gain GV VOUT =10V, RL=2.0kΩ
TA=0C to 70C 25
VCC=+5.0V,VEE=0V,RL=2.0kΩ, TA=+25C 3.7 4.0 V
VCC=+15.0V,VEE=-15V,
Output Voltage Swing 13.6 14 V
VOH RL=10kΩ, Ta=+25C
(VID=+-1.0V)
VCC=+15.0V,VEE=-15V,
13.4 V
RL=2.0kΩ, Ta=0C to 70C
VCC=+5.0V,VEE=0V,RL=2.0kΩ, TA=+25C 0.1 0.3 V
VCC=+15.0V,VEE=-15V,
Output Voltage Swing -14.7 -14.3 V
VOL RL=10kΩ,TA=+25C
(VID=+-1.0V)
VCC=+15.0V,VEE=-15V, RL=2.0kΩ,
-13.5 V
TA=0C to 70C
Source 10 30 mA
Output Short Circuit current ISC VI(DIFF)=1.0V,VOUT=0V, TA=25C
Sink 20 30
Common Mode Rejection CMR RS<=10kΩ,VCM=VICR, TA=25C 80 97 dB
Power Supply Rejection VCC/VEE=+16.5V/-16.5V to +13.5/-13.5V,
SVR 80 97 dB
(RS=100Ω) TA=25C

UNISONIC TECHNOLOGIES CO., LTD 4 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT

 ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
VCC=+5.0V,VEE=0V, VOUT =+2.5V,
1.6 2.0 mA
Ta=+25C
Power Supply Current (Per VCC=+15.0V,VEE=-15V,
ID 1.9 2.5 mA
Amplifier, No Load) VOUT =0V,Ta=+25C
VCC=+15.0V,VEE=-15V,
2.8 mA
VOUT =0V, Ta=0C to 70C
VIN=-10V to +10V, RL=2.0kΩ, Av=+1.0 8.0 10
Slew Rate SR V/μs
CL=500pF Av=-1.0 13
10 Setp, Av=-1.0
Setting Time ts to 0.1% (+1/2 LSB of 9-Bits) 1.1 s
to 0.01% (+1/2 LSB of 12-Bits) 2.2
Gain Bandwidth Product GBW f=100kHz 3.5 4.5 MHz
Power Bandwidth BW Av=+1.0, RL=2kΩ, VOUT=20Vpp, THD=5.0% 160 kHz
RL=2kΩ 60 Deg
Phase Margin fm
RL=2kΩ, CL=300pF 40 Deg
RL=2kΩ 12 dB
Gain Margin Am
RL=2kΩ, CL=300pF 4 dB
nV/H
Equivalent Input Noise Voltage eN Rs=100Ω, f=1.0kHz 32
z
pA/H
Equivalent Input Noise Current eN f=1.0kHz 0.22
z
Differential Input Resistance RIN VCM=0V 150 MΩ
Differential Input Capacitance CIN VCM=0V 2.5 pF
Av=+10,RL=2.0kHz,2.0VppVOUT20Vpp,
Total Harmonic distortion THD 0.02 %
f=10kHz
Channel Separation f=10kHz 120 dB
Open Loop Output Impedance IZoI f=1.0MHz 30 W

UNISONIC TECHNOLOGIES CO., LTD 5 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT

 TYPICAL CHARACTERISTICS

UNISONIC TECHNOLOGIES CO., LTD 6 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT
 TYPICAL CHARACTERISTICS (Cont)

Output Saturation Voltage, VSAT (V)

Output Saturation Voltage, VSAT (V)
Output Saturation Voltage, VSAT (V)

Output Current, ISC (mA)

UNISONIC TECHNOLOGIES CO., LTD 7 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT
 TYPICAL CHARACTERISTICS(Cont.)

Open Loop Voltage Gain and Phase vs.

Open Loop Voltage Gain vs. Temperature
Frequency
116 100

112 VCC = +15V 80

Open Loop Voltage Gain, AVOL (dB)
Open Loop Voltage Gain, AVOL (dB)

VEE = -15V Gain

Φ,Excess Phase (Degrees)

VO = -10V ~ +10V 45
Phase
RL = 10k
108 1 ≤ 10Hz 60
Phase Margin = 60°
90

104 40

VCC = +15V 135

VEE = -15V
100 20 VO = 0V
RL = 2.0k
TA = 25°C 180

96 0
-55 -25 0 25 50 75 100 125 1.0 10 100 1.0k 10k 100k 1.0M 10M 100M

Ambient Temperature, TA (°C) Frequency, f (Hz)

UNISONIC TECHNOLOGIES CO., LTD 8 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT
 TYPICAL CHARACTERISTICS (Cont.)

Phase Margin, Φm (Degrees)

Gain Margin, Am (dB)
Gain Margin, Am (dB)

UNISONIC TECHNOLOGIES CO., LTD 9 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT
 TYPICAL CHARACTERISTICS (Cont.)

Normalized Slew Rate vs. Temperature Output Setting Time

1.15 10
VCC = +15V
VEE = -15V 1.0mV VCC = +15V
1.1 AV = +1.0 VEE = -15V
10mV 1.0mV AV = -1.0
RL = 2.0k
5.0 TA = 25°C
CL = 500pF
1.05

Compensated
1.0 0
Uncompensated

0.95
-5.0 1.0mV
10mV
0.9
1.0mV

0.85 -10
-55 -25 0 25 50 75 100 125 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Ambient Temperature, TA (°C) Settung Time, ts (μs)

Common Mode Rejection vs. Frequency Power Supply Rejection vs. Frequency
100 100
TA = 125°C
VCC = +15V VCC = +15V
TA = 25°C VEE = -15V VEE = -15V
VCM = 0V
Common Mode Rejection, CMR (dB)

PSR, Power Supply Rejection (dB)

80 80 TA = 25°C
ΔVCM = ±1.5V
TA = -40°C
ΔVCC
(ΔVCC = +1.5V)
-
60 60 ADM ΔVOUT
+
ΔVEE
40 40 +PSR
ΔVOUT/ADM
+PSR = 20Log
ΔVCC
20 20
ΔVCM ΔVOUT/ADM
CMR = 20Log × ADM -PSR = 20Log
ΔVOUT ΔVEE -PSR
(ΔVEE = +1.5V)
0 0
0.1 1.0 10 100 1.0k 10k 100k 1.0M 10M 0.1 1.0 10 100 1.0k 10k 100k 1.0M 10M

Frequency, f (Hz) Frequency, f (Hz)

UNISONIC TECHNOLOGIES CO., LTD 10 of 11

www.unisonic.com.tw QW-R105-007.H
MC34072 LINEAR INTEGRATED CIRCUIT
 TYPICAL CHARACTERISTICS (Cont.)

Channel Separation vs. Frequency Input Noise vs. Frequency

120 70 2.8

60 VCC = +15V 2.4

100 VCC = +15V
VEE = -15V
VEE = -15V
Input Noise Voltage, eN (nV√Hz)

Input Noise Current, IN (pA√Hz)

VCM = 0
TA = 25°C 50 TA = 25°C 2.0
Channal Separation (dB)

80

40 1.6
60 Voltage

30 1.2

40
20 Current 0.8

20 10 0.4

0 0 0
10 20 30 50 70 100 200 300 10 100 1.0k 10k 100k

Frequency, f (KHz) Frequency, f (Hz)

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.

UNISONIC TECHNOLOGIES CO., LTD 11 of 11

www.unisonic.com.tw QW-R105-007.H