Opt Math Class X Book (MP)
Opt Math Class X Book (MP)
Optional
Mathematics
(Practice MaterialS)
Grade – X
b. If matrix A =
( pr qs )
, what is the value of |A| ?
3. a. If the slopes of two straight lines and m1 and m2 respectively and θ be the angle between
them, write the formula for tanθ.
b. Which geometric figure will be formed if a plane intersects a cone parallel to its base?
4. a. Express sin2A in terms of tanA.
b.Define angle of elevation.
5. a. What is the scalar product of two vectors ⃗a and b if the angle between them is θ?
⃗
b. In a inversion transformation if P’ is the image of P and r is the radius of inversion circle
with centre O, write the relation of OP, OP’ and r.
7. a. If A =
(23 −11 )
, find |A| and write A-1 is defined or not.
b. According to Cramer’s rule, find the values of D1 and D2 for ax +by =c and px +qy =r.
8. a. Find the slopes of two straight lines 3x +4y +5 =0 and 6x +8y +7 =0and write the
relationship between them.
b. Find the single equation for the pair of lines represented by 3x +2y =0 and 2x -3y =0.
9. a. Convert sin6A.cos4A into sum or difference of sine and cosine.
sin A
b. Express 1+cos A in terms of sub-multiple angle of tangent.
c. If 2sin2θ = √3 , find the value of θ. (00 ⦤ θ ⦤ 1800)
a P
p
O B
19. Find the 2×2 matrix which transforms a unit square to a parallelogram
(00 3 4 1
0 1 1 .)
20. Find the mean deviation from mean and its coefficient from the given data.
Marks Obtained 0-10 10-20 20-30 30-40 40-50
No. of students 2 3 6 5 4
21. Find the standard deviation and coefficient of variation from the given data.
Age (in years) 0-4 4-8 8-12 12-16 16-20 20-24
No. of students 7 7 10 15 7 6
Algebra
Relation and function
Let A and B are two non empty sets. Then the any sub-sets of Cartesian product A×B is called
relation from set A to set B where x ϵ A and y ϵ B.
Let A and B are two non empty sets. Then the relation from set A to set B is called function if
every element of set A is associated with the unique element of set B.
Constant Function
A function f : A→ B is said to be constant function if every element of set A has the same
image in set B. A
B
f
1 2
3 4
4 6
Identity Function
A function f : A→ A is said to be identity function if pre-image and image are same
i.e.y=f(x)=x. A
B
f
1 1
2 2
3 3
Trigonometric function
A function f : A→ B is said to be trigonometric function if it is expressed in terms of
trigonometrical ratios. For examples: y=f(x)=tan2x.
Linear Function
A function f : A→ B is said to be linear function if it can be expressed in the form of y= f(x)
= mx + c where m and c are constant.
Quadratic Function
A function f : A→ B is said to be quadratic function if it is expressed in the form of y= f(x)
2
= ax +bx+c, where a, b and c are constant.
Inverse Function
Let f : A→ B be a one to one onto function. Then the new function from set B to set A is
called inverse function if every element of set B is associated with the unique element of set A. It is
denoted by f-1.
Composite Function
Let f : A→ B and g: B→C be two functions. Then the new function from set A to set C is
called composite function if every element of set A is associated with the unique element of set C. It is
denoted by gof of gf.
B C
A f(x) g(x)
x g(x) gf(x)
gof(x)
Transcendental Function.
A function from set A to set B is called transcendental function if it does not satisfy the
properties of addition, subtraction, multiplication and division like an algebraic function. For
1
x
examples: f (x )=x , g(x) = sinx, h(x) = xx, etc.
f g
3 a
1 1
4 b
2 2
5 c
3
A B A B
Many to one function.
A function f : A→ B is said to be many to one function if at least two elements of set A has
same image in set B.
f g
4 a
1 1
5 b
2
2
3 c
3
A B A B
Onto function.
A function from set A to set B is called onto function if range is equals to co-domain.
f g
4 a
1 1
5 b
2
2
3 c
3
A B A B
Into function.
A function from set A to set B is called into function if at least on element of set B has no pre-
image in set A i.e. range is not equal to co-domain.
f g
4 a
1 1
5 b
2
2 6 c
3
A B A B
Remainder Theorem
If a polymonial f(x) of degree n is divided by (x-a), then the remainder is given by f(a) or R.
This is Remainder Theorem.
Proof:
Let p(x) be a polynomial divided by (x-a) and remainder is f(a) and Q(x) be the quotient.
We have,
f(x)=(x-a).Q(x)+R
This is true for all values of x.
So, when x=a,
f(a)= (a-a).Q(a)+R
or, 0.Q(a)+R
.: f(a)=R. which is the remainder theorem.
Factor Theorem
If the polynomial f(x) of degree n is divided by (x-a) and remainder, R=f(a)=0 then (x-a) is a
factor of f(x). This is Factor Theorem.
Proof:
Let f(x) be a polynomial which is divided by (x-a) and quotient is Q(x).
We have,
f(x)=(x-a).Q(x)+R
or, f(x)= (x-a).Q(x)+0
or, f(x)= (x-a).Q(x)
which show that (x-a) is a factor of f(x).
Synthetic Division Method.
It is the process which helps us to find the quotient and remainder when a polynomial f(x) is
divided by (x – a) where degree of f(x)> 1 and degree of (x –a ) is 1.
Sequence and series:
A set of numbers arranged in a definite order by a certain rule is called a sequence.
For examples: 2,4,8,16,……
2,3,5,8.
3,7,11,15,19,………… etc.
The sum of all the terms of the sequence is called a series.
For examples: 2+4+8+16+…….
2+3+5+8+……...
3+7+11+15+19+…… etc
Finite series
A series is said to be finite series if it has finite number of terms.
For examples: 2+4+8+10.
3+6+12+24. etc
Infinite series
A series is said to be infinite series if it has infinite number of terms.
For examples:2+4+6+8+10+……
2+4+8+16+32+64,………etc.
Arithmetic sequence
A sequence is said to be Arithmetic sequence if the difference between a term and its preceding
(previous) term is equal throughout the whole sequence.
For examples: 2, 4, 6, 8, 10,……
1, 4, 7, 10, 13. etc.
Arithmetic Mean(AM)
The term or terms between first and last terms of arithmetic progression is called arithmetic
mean.
Let AM be the arithmetic mean between a and b.
Here,
a, AM and b are in A.P. So,
t2-t1=t3-t2
AM-a=b-AM
Or, 2AM=a+b
a+b
:. AM= 2 which is the arithmetic mean between two numbers.
In an Arithmetic Progression,
First term = a
Numbers of terms = n
Numbers of arithmetic means=n1
Last term=l/b
Common difference=d
nth term/last term (tn) = a+(n-1)d
n
Sum of first n terms(Sn) = 2 [2a+(n-1)d]
n
= 2 (a+l)
Common difference(d)=t2-t1=t3-t2=….. and so on.
And
In arithmetic means,
b−a
Common difference(d)= n1 +1 , where n1 means numbers of means.
1st mean(m1)= (t2)= a+d
2nd mean (m2) = (t3) = a+2d
3rd mean (m3) =(t4) =a+3d,….
and mth mean (mn)= a+nd.
Some extra formulae of arithmetic progression
n(n+1)
1. Sum of the first n natural numbers(sn) = 2 .
2
2. Sum of the first n odd natural numbers(sn)=n .
3. Sum of the first n even natural numbers(sn) = n(n+1).
n(n+1)(2 n+1 )
4. Sum of the squares of the first n natural numbers(sn)= 6 .
2
n( n+1)
5. Sum of the cubes of the first n natural numbers (sn)=
[ 2 ] .
Note:
The easy method to denote the terms of AP.
No. of terms Terms Common difference
3 a –d, a, a +d d
4 a -3d, a –d, a + d, a +3d 2d
5 a – 2d, a –d, a, a +d, a +2d d
6 a – 5d, a -3d, a -d, a +d, a +3d, a +5d 2d
If the number of terms is odd, the common difference is ‘d’ and middle term is ‘a’ whereas if the
number of terms is even, common difference is ‘2d’ and middle term is ‘a’.
Geometric sequence
A sequence is said to be geometric sequence if the ratio between a term and its preceding
(previous) term is equal throughout the whole sequence.
For examples: 1, 3, 8, 27,……..
2, 4, 8, 16, 32, 64. etc.
Geometric Mean(GM)
The term or terms between a first term and last term of a geometric progression is called
geometric mean.
Let GM be the geometric mean between two numbers a and b.
Here, a, GM and b are in GP. So,
t2 t3
=
t1 t2
GM b
=
Or, a GM
Or, (GM)2 =ab
:. GM= √ ab which is the geometric means between a and b.
In a Geometric Progression,
First term = a
Numbers of terms = n
Numbers of geometric means=n1
Last term=l/b
Common ratio =r
nth term/last term (tn) = a.rn-1
a(r n −1) lr−a
Sum of first n terms(Sn) = r−1 = r−1
t2 t3
=
Common ratio(r)= t 1 t 2 ….. and so on.
And
In geometric means
1
b
Common ratio (r)= a
() n 1+1
Quadratic Equation:
The quadratic equation is ax2+bx+c=0
−b 4 ac−b2
(
:. Vertex (turning point)= 2 a
,
4a ) .
2
If y =ax +c, vertex = (0, c).
Parabola.
The smooth curve obtained by the graph of a quadratic equation is called the parabola.
In the equations y =2x2, and y =3x3, the equation y =2x2 has wider curve i.e. larger the value of
‘a’ makes narrower opening where as smaller value of ‘a’ makes wider opening.
b
x=−
The equation of symmetry of parabola is 2 a . If y =ax2 +c, the equation of line of
symmetry is x = 0 and so on.
Linear programming.
It is the mathematical technique for finding the maximum or minimum value of a linear
function subject to the set of linear constraints is called linear programming.
The linear function which is to be maximized or minimized with respect to given constraints is
called objective function.
A closed plane region bounded by the intersection of the finite number of boundary lines is
called feasible region.
AB is possible
Order of AB
m×p
Transpose of a matrix
A matrix obtained by interchanging the elements of rows and columns of a given matrix is
T
2 3 2 3
(
called transpose of a matrix. Let A = −1 0
) then the transpose of matrix A=AT=
( )
−1 0 =
2 −1
( 3 0 . )
Determinant of a matrix:
Let A=
(ac bd ) be a square matrix of order 2×2, then the determinant of matrix A is given by,
a b
| |
Determinant A= |A| = c d = ad-bc.
A square matrix with determinant zero is called singular matrix.
A square matrix with its determinant is not equal to zero is called non-singular matrix.
Determinant is possible only in square matrix.
Addition and subtraction of two matrices are possible if they have same orders.
Inverse Matrix
If A be a non-singular square matrix then there exists another matrix B such that AB =BA=I,
where I is an identity matrix of same order then matrix B is called inverse of A which is denoted A-1.
a b
Let A=
(ac bd ) and Determinant A= |A| =
| |
c d = ad-bc.
adjoint ofA 1 d −b
:.Inverse of A=A-1= |A| = ad−bc −c a
( ) .
Position Vector
A vector whose initial point is origin is called position vector.
From the figure, the position vector
Y
OP= x
⃗
()
of the point P(x, y) is, y .
P(x, y)
O
X’ X
Magnitude of a vector is the length of its directed line segment from initial point to the terminal
⃗a = x ()
point. If y , then
:. Magnitude of AB
⃗ = AB|=√( x−component)2+( y−component)2
|⃗
= √( x 2−x 1 )2+( y 2 − y 1 )2 units.
Here, a2 = ( ⃗a )2 =
⃗a .⃗a=|⃗a|.|⃗a|
⃗i = 1 ⃗j= 0
⃗i and
⃗j areunit vectors along X-axis and Y-axis respectively i.e. 0 () ,and
()
1 .
⃗i2= ⃗j2=1 ⃗i . ⃗j= ⃗j . i⃗ =0
Then, and .
On what condition the two vectors ⃗a and
⃗b are perpendicular (orthogonal) to each other?
Two vectors ⃗a and
⃗b are perpendicular to each other if ⃗a .
⃗b =0.
On what condition the two vectors ⃗a and
⃗b are parallel (collinear) to each other?
Two vectors ⃗a and
⃗b are parallel to each other if ⃗a =k
⃗b where k is a scalar.
Vector Geometry
Triangle law of vector addition:
The sum of vectors represented by two sides in an order is equal A
to the vector represented by remaining side taken in opposite order.
In the adjoining figure,
By triangle law of vector addition,
AC=⃗
⃗ AB+⃗
BC .
B C
Parallelogram law of vector addition:
The sum of two co-initial vectors represented by the
adjacent sides of parallelogram is equal to the vector D C
represented by co-initial diagonal.
In the adjoining figure,
By parallelogram law of vector addition,
AC=⃗
⃗ AB+⃗
AD .
A B
Polygon law of vector addition:
If the vectors represented by the sides of a polygon taken
in order, then the resultant vector is the vector represented D
by the closing side of the polygon taken in opposite order.
In the adjoining figure,
By polygon law of vector addition,
AC=⃗
⃗ AB+⃗
BC +⃗
CD+ ⃗
DE .
E C
A B
O a
X
⃗a + b⃗
⃗p=
If P is the midpoint of AB, then 2 which is the midpoint formula.
⃗a + ⃗b +⃗c
is given by
⃗g =
3 .
B C
D
* Centroid divides the median in the ratio 2:1 ratio from its vertex.
* The point of intersection of median of triangle is centroid.
* The line joining the midpoint of side with its opposite vertex is called median.
Trigonometry
Trigonometric ratios of compound angles.
1. Sin(A+B) = sinA.cosB + cosA.sinB
2. Sin(A-B) = sinA.cosB - cosA.sinB
3. cos(A+B) = cosA.cosB - sinA.sinB
4. cos(A-B) = cosA.cosB + sinA.sinB
tan A+tan B
5. tan(A+B)= 1−tan A . tan B .
tan A−tan B
6. tan(A-B)= 1+tan A . tan B .
cot A .cot B−1
7. Cot(A+B)= cot B+cot A .
cot A .cot B+1
8. Cot(A-B) = cot B−cot A
Trigonometric ratios of multiple and sub multiple angles.
If A be any angle then 2A, 3A, 4A, …… etc are called multiple angles of A.
A A A
, , ,...
If A be any angle then 2 3 4 etc are called sub-multiple angles of A.
2 tan A 2 cot A
2 2
1. Sin2A=2sinA.cosA= 1+ tan A = 1+cot A .
1−tan 2 A cot 2 A−1
2 2
2. Cos2A = cos2A-sin2A=2cos2A-1 =1-2sin2A = 1+tan A = cot A+1 .
2 tan A
2
3. Tan2A = 1−tan A .
cot2 A−1
4. Cot2A = 2 cot A .
5. Sin3A = 3sinA – 4sin3A. (:.4sin3A=3sinA- Sin3A)
3
6. Cos3A = 4cos A-3cosA. (:.4cos3A =3CosA + cos3A)
3
3 tan A−tan A
7. Tan3A = 1−3 tan 2 A .
cot 3 A−3 cot A
8. Cot3A = 3 cot2 A−1 .
A A
2 tan 2 cot
2 2
A A A A
2 sin . cos 1+ tan 2 1+cot 2
9. SinA = 2 2 .= 2 .= 2 .
A A A
cos 2 −sin 2 2 cos2 −1
10. cosA = 2 2 = 2 =
A A
1−tan 2 cot 2 −1
2 2
A A A
1−2 sin2 1+tan 2 cot 2 + 1
= 2 = 2 = 2 .
A
2 tan
2
A 1−tan 2 A cot2 A−1
1−tan 2 2 2
11. tanA = 2 . Cos2A= 1+tan A = cot A+1
A
cot2 −1
2 1−cos2 A
2 cot
A Tan A = 1+cos2 A
2
12. cotA = 2 .
A A 1+cos2 A
3 sin −4 sin3
13. sinA = 3 3 . cot2A = 1−cos2 A
A A
4 cos3 −3 cos A 1−cos A
14. cosA = 3 3 tan 2 =
2 1+cos A
A 3A
3 tan −tan
3 3 A 1+cos A
cot2 =
A 2 1−cos A
1−3 tan 2
15. tanA = 3 .
A A
cot3 −3 cot
3 3
A
3 cot −1
16. CotA = 3 .
Transformation of Trigonometric ratios.
Some trigonometric identities which are true only for certain given condition are known as
conditional identities.
X (900-θ), (3600-θ)
X X
X X
X X
X X X
X X
X X
Y’
Trigonometric ratios of an angle(-θ) Trigonometric ratios of an angle (900-θ)
Sin(-θ)= - sinθ Sin(900-θ) = cosθ
cos(-θ) = cosθ cos(900-θ) = sinθ
tan(-θ) = - tanθ tan(900-θ) = cotθ
cosec(-θ) = - cosecθ cosec(900-θ) = secθ
sec(-θ) = secθ sec(900-θ) = cosecθ
cot(-θ) = - cotθ cot(900-θ) = tan θ
Angle of Elevation:- The angle made by the horizontal line and the lineof sight while observing any
object that is above the eye level is called angle of elevation.
Angle of Depression:- The angle made by the horizontal line and the lineof sight when the
object lies below the level of observer’s eye thenit is called angle of depression.
The equation which satisfied by all the values of the angle θ are called trigonometric identities.
The equation which satisfy by only some values of the angle θ are called trigonometric
equations.
Trigonometric Ratios:
p b p h h b
sin= cos= tan= cosec= sec= cot=
h , h , b , p , b , p .
From Pythagorous theorem. h2 =p2 + b2.
So, sin2 + cos2 =1, :. Sin = √ 1−cos2 and cos = √ 1−sin2
2
sec2 – tan2 =1, :. Sec = √ 1+tan and tan = √ sec2−1
2
cosec2 –cot2 =1. :. cosec = √ 1+cot and cot = √ cosec2−1
Transformation
The change in shape, size or position of the geometric figure is called transformation. The
geometric figure before transformation is object and the geometric figure after transformation is image.
The four fundamental transformation are:
Reflection
Rotation
Translation
Enlargement or Reduction.
The types of transformation are:
1. Identity transformation: object and image points are same i.e. invariant
2. Isometric transformation: position is changed but no change in size of the object figure.
3. Non-Isometric transformation: size of geometric figure is changed.
Reflection, Rotation and Translation are isometric transformation.
Enlargement and Reduction are non-isometric transformation.
In which transformation does the size of image figure alter (change)?
The size of image figure alters in non-isometric transformation.
In which transformation the size of image figure doesnotalter (change)?
The size of image figure doesnot alter in isometric transformation.
Formulae of Reflection.
1. Reflection about X-axis.
P(x, y) P’(x, -y)
2. Reflection about Y-axis.
P(x, y) P’( -x, y)
3. Reflection on the line y = x.
P(x, y) P’(y, x)
4. Reflection on the line y = - x.
P(x, y) P’(- y, - x)
5. Reflection on the line x = a.
P(x, y) P’(2a –x, y)
6. Reflection on the line y = b.
P(x, y) P’(x, 2b - y)
7. Reflection on the line x+ y = m.
P(x, y) P’(m –y, m-x)
8. Reflection on the line x - y = n.
P(x, y) P’(y +n, x-n)
If reflection in the line x =h is followed by reflection in the line y =k, the combined
transformation is rotation through half turn about (h, k).
If the reflection in the line x =h is followed by reflection in y =x, the single transformation is
negative quarter turn about (h, h).
Formalue of Rotation
1. Rotation through +900/-2700about origin(Positive quarter turn)(Anticlockwise rotation).
P(x, y) P’(-y, x)
0
2. Rotation through 180 about origin(Half turn).
P(x, y) P’(-x, -y)
3. Rotation through -90 /2700 about origin(Negative quarter turn)(Clockwise rotation).
0
P(x, y) P’(y,- x)
4. Rotation through +90 /-2700about centre at (a, b).
0
If OP < r, P’ lies outside the circumference of inversion circle i.e. OP’ > r.
If OP = r, P’ lies on the circumference of inversion circle i.e.OP = OP’.
If OP > r, P’ lies inside the circumference of inversion circle i.e.OP’ < r.
If the point and its inverse point can be always be interchanged, this property is called
symmetric feature of inversion.
1. The inversion of a point P(x, y) with respect to a circle with centre at origin and the radius ‘r’ is
a point P’(x’ y’) such that:
r2 x r2 y
P'( x', y')= ( ,
x 2+ y 2 x 2+ y 2
.
)
2. The co-ordinates of the inverse point P’(x’, y’) of the point P(x, y) with respect to the circle
having centre (h, k) is,
' r 2 ( x−h ) ' r 2 ( y−k )
x =h+ y =k+
( x−h )2 + ( y−k )2 and, ( x−h )2 + ( y−k )2 .
Statistics.
The three types of series are:
1. Individual Series.
2, 4, 6, 8, 10.
2. Discrete series:
X 1 20 3 40 50 60
0 0
f 3 4 6 8 10 3
3. Continuous series:
Class 0-10 10-20 20-30 30-40 40-50
Interval
frequency 3 5 4 6 2
Quartile Deviation:
N +1 th
Position of 1st quartile = . 4 ( ) item
(In Individual and discrete series)
th
N
= 4 ( )
term
(In Continuous series)
N
−cf
4
l+ ×h
:. Exact 1st Quartile/Lower Quartile (Q1) = f
Where,L= lower limit of corresponding class interval.
N =Number of observations.
f = frequency of the corresponding class interval.
cf = cumulative frequency just above the corresponding class interval.
h = height/different of the class interval.
N +1 th
rd
And, Position of 3 quartile = .3 4 ( )
item
(In Individual and discrete series)
th
N
=3 4 ( )
term
(In Continuous series)
3N
−cf
4
l+ ×h
:. Exact 3rd Quartile/ Upper Quartile (Q3) = f
Inter quartile range = Q3 –Q1.
Q 3 −Q1
Semi inter quartile range (Quartile Deviation) = 2 .
Q3 −Q1
Coefficient of Quartile Deviation(Q.D.) = Q3 +Q1 .
Mean Deviation(Average Deviation).
Σx
Mean( x ) = N (For individual Series)
∑ fx
= N (For discrete and continuous series)
th
N +1
Median(Md)=
( )2 term (For individual and discrete series)
th
=
( N2 ) item (For continuous series)
N
−cf
2
L+ ×h
Then, Exact Median(Md) = f
Where, L= lower limit of corresponding class interval.
N =Number of observations.
f = frequency of the corresponding class interval.
cf = cumulative frequency just above the corresponding class interval.
h = height/different of the class interval.
∑ |d|
:. Mean Deviation(MD) = N (For individual series)
∑ f |d|
= N (For discrete and continuous series)
Where, d = x - x or (x –Md)
MeanDeviation
And,coefficient of MD= mean/median .
Standard Deviation(σ)= √ ∑ d2
N (or,= √ ∑ x2 − ∑ x
n ( ) N
2
(For individual series)(d= x- x )
= √ ∑ fd 2
N (or,= √ ∑ fd 2 −
n
Standard Deviation(σ )
∑
N
fd
( ) (For discrete and continuous series)
lower limitof 2nd clas sin terval−upper limitof 1st clas sinterval
Correction factor (cf) = 2 .
Now, to make continuous data, we use L -cfandU +cf for each class interval.
Co-ordinate Geometry
Angles between two straight lines
Find the angles between two straight lines having slope and Y-intercept.
(Or, Find the angles between two straight lines having the equations y =m1x+c1 and y +m2x+c2.
Y
Let AB and CD are two straight A C
lines with equations y =m1x+c1 and
Y=m1x+c1
y +m2x+c2 respectively and P be the Y=m2x+c2
point of intersection of lines AB and
CD which makes an angle θ. 1800-θ
P
Here, θ
Slope of line AB (m1) = tanθ1.
Slope of line CD (m2) = tanθ2.
θ2 θ1
X’ X
O
D B
From figure,θ1 =θ +θ2
Or, θ =θ1 –θ2
Taking tan on both sides, we get
Tanθ =tan(θ1 –θ2)
tan θ1 −tanθ 2 tan A−tan B
Or, tanθ = 1+tan θ 1 . tan θ 2 [:. Tan(A –B) = 1+tan A . tan B ]
m −m 2
or ,tan θ= 1
1+m1 .m 2 (i)
:. θ =
(
tan −1 ±
1+m1 .m2 )
which is the angles between two straight lines.
Case I: When the lines are parallel (coincide) to each other i.e. θ =00.
m1−m2
Tanθ = ± 1+m1 . m2
m1−m2
Or, Tan00 = 1+m1 . m2
0 m1−m2
Or, 1 = 1+m1 . m2
Or, 0 =m1 –m2
:. m1 =m2.
Case II: When the lines are perpendicular (orthogonal) to each other i.e. θ =900.
m1−m2
Tanθ = ± 1+m1 . m2
m1−m2
Or, Tan900 = 1+m1 . m2
1 m1−m2
Or, 0 = 1+m1 . m2
Or, 1 + m1.m2 = 0
:.m1.m2 = -1.
coefficientofA
−
Slope of the line AX+BY+C is (m) = coefficientofB .
y 2− y 1
Slope of the line joining the points (x1, y1) and (x2, y2) is (m) = x2 −x 1 = tanθ.
Find the equation of a line parallel to ax +by +c =0.
Here,
The equation of the line is,
ax +by +c =0
a
−
Slope (m1) = b
Let m2 be the slope of the required line. As they are parallel to each other.
a
−
So, m1 =m2 = b .
The equation of the line is,
y =m2x +c1
a
−
or, y = b x +c1
−ax+ bc 1
or, y= b
or, yb = -ax +bc1
or, ax +by –bc1 =0
or, ax +by +k =0 which is the required equation of the line parallel to ax +by +c =0 where k
= -bc1.
Find the equation of a line perpendicular to ax +by +c =0.
Here,
The given equation is,
ax +by +c =0
a
−
Slope (m1) = b
Let m2 be the slope of the required line. As they are perpendicular to each other.
So, m1 .m2 = -1
a
−
. b .m2 = -1
b
m2 = a
The equation of the line is,
y = m2x +c1
b
or, y = a x +c1
bx+ac1
or, y= a
or, ay = bx +ac1.
Or, bx –ay +ac1 =0
Or, bx –ay + k =0 which is the required equation of the line perpendicular to ax +by +c =0
where k =ac1.
2 2
Distance formula (d) = √ ( x −x ) +( y − y )
2 1 2 1
x1 + x2 y1 + y 2
Mid point formula, P(x, y)=
( 2
,
2 ) .
x1 + x2 + x 3 y 1 + y 2 + y3
Centroid formula,P(x, y)=
( 3
,
3 ) .
m1 x 2 + m2 x 1 m1 y 2 + m2 y 1
Find the angles between two straight lines having the equation ax2 +2hxy +by2 =0.
Here, the given equation is,
ax2 +2hxy +by2 =0.
Or, by2 +2hxy +ax2 =0.
by 2 + 2hxy + ax 2 0
=
Or, b b .
2h a 2
x =0
Or, y2 + b xy + b . (1)
Let the two separate lines are,
y =m1x and y =m2x
or, y –m1x = 0 and y -m2x = 0
combining equation (i) and (ii), we get,
(y –m1x) .(y –m2x) = 0.
Or, y2 –m2xy – m1xy +m1m2x2 =0.
Or, y2–(m1 +m2)xy +m1m2x2 = 0 (2)
The lines (1) and (2) are identical. So,
2h a
−
m1 +m2 = b and m1.m2 = b .
Let θ be the angles between them. Then
m −m
± 1 2
We have, Tanθ = 1+m1 m2
2
±
√( m −m ) 1 2
a
1+
= b
2
±
√( m + m ) −4 m .m
1 2 1 2
b+ a
= b .
2h 2 a
±
√( −
b
b+a
)
−4
b
= b .
4 h2 4 a
±
b2√
a+b
−
b
= b .
4 h2 −4 ab
± √b2
a+b
= b
4 2
±
b2 √
(h −ab)
a+ b
= b
2
√ (h2 −ab )
b
±
a+b
= b
2 √(h 2−ab)
±
= a+b
−1 2 √ (h2 −ab )
tan (± )
:. θ = a+b
which is the angle between two straight lines.
Case I: When the lines are parallel (coincident) i.e. θ =00.
2 √(h 2−ab)
±
We have, tanθ = a+b
2 √ (h 2−ab)
Or, tan00 = a+b
2 √ (h 2−ab)
Or, 0 = a+b
2
√
Or, 0 = 2 h −ab .
Or, 0 = h2–ab.
:. h2 =ab.
Case II: When the lines are perpendicular (orthogonal ) i.e. θ = 900.
2 √(h 2−ab)
±
We have,tanθ = a+b
2 √ (h 2−ab)
Or, tan900 = a+b
1 2 √ (h 2−ab)
=
Or, 0 a+b
:. a + b =0.
Prove that the homogeneous equation of second degree ax2 +2hxy +by2 = 0 always represent a pair of
straight linesthrough origin.
Here, the homogeneous equation of second degree is,
ax2 +2hxy +by2 = 0.
Dividing both sides by bx2.
2 2
ax + 2hxy + by 0
2
= 2
bx bx .
a 2h y y 2
+ . +
Or, b b x x
=0 ()
.
2
y 2h y a
Or, x() + . + =0
b x b .
y
This is the quadratic of x . So, it has two roots/values. Let the two roots be m1 and m2, then
y y
=m1 =m2
x and x .
Or, y =m1x and y = m2x.
Both of these equation are linear of x and y and satisfied by origin.
Hence, the homogeneous equation of second degree ax2 +2hxy +by2 = 0 always represents the pair of
straight lines through origin.
Find the single equation of the lines through origin and perpendicular to the line represented by ax2
+2hxy +by2 =0.
Here, the given equation is,
ax2 +2hxy +by2 =0.
Or, by2 +2hxy +ax2 =0.
Dividing both sides by b. We get,
by 2 + 2hxy + ax 2 0
=
Or, b b .
2h a 2
x =0
Or, y2 + b xy + b . (1)
Let the two separate lines are,
y = m1x and y = m2x
or, y –m1x = 0 and y -m2x = 0
Combining equation (i) and (ii), we get,
(y –m1x) .(y –m2x) = 0.
Or, y2 –m2xy – m1xy +m1m2x2 =0.
Or, y2–(m1 +m2)xy +m1m2x2 = 0 (2)
The lines (1) and (2) are identical. So,
2h a
−
m1 +m2 = b and m1.m2 = b .
Now, Equation of the lines through origin and perpendicular to straight lines through origin are,
m1y +x =0 and m2y +x =0.
Combining both the equations,
(m1y +x).( m2y +x) =0.
Or, m1.m2y2 +m1xy +m2xy +x2 =0.
Or m1.m2y2 +(m1 +m2)xy +x2 =0.
a 2 2h
y − xy+bx 2 =0
Or, b b .
2 2
ay −2 hxy +bx
=0
Or b .
:. bx2 -2hxy +ay2 =0 which is the single equation of pair of lines perpendicular to ax2
2
+2hxy +by =0 through origin
Circle
The locus of a moving point which moves so that its distance from a fixed point is constant is
called a circle.
1. Equation of a circle with centre at origin (Standard Form)
Let O (0, 0) be the centre of the circle. If P(x, y) be any point at thecircumference of the circle.
Here, OP = r
Or, OP2 = r2. Y
Or, (x2 –x1)2 +(y2-y1)2 = r2.
Or, (x –0)2 +(y-0)2 = r2. P(x,y)
2 2 2
Or, x +y = r .which is the
r
equation of a circle with centre
at origin.
X’ X
O(0, 0)
Y’
2. Equation of a circle with centre at the point (h, k) (Central Form)
Let A (h, k) be the centre of the circle
with radius r and P(x, y) be any point at the Y’
circumference of the circle.
P(x,y)
Here, PA = r r’
Or, PA2 =r2.
Or, (x2 –x1)2 +(y2 –y1)2 =r2.
Or, (x –h)2 +(y –k)2 = r2. which A(h,k)
is the equation of the circle with
centre at the point (h, k).
O’
X’ X
Y’
3. Equation of a circle in diameter form.
Let O be the centre of the circle and A(x1, y1) and B(x2, y2) be two ends of diameter of
the circle.Suppose P(x, y) be any point at the circumference of a circle.
y 2− y 1 y − y1 P(x, y)
Slope of AP (m1) = x2 −x 1 = x−x 1 .
y 2− y 1 y − y2
Slope of BP (m2) = x2 −x 1 = x−x 2 .
0
Here, AP ¿ BP i.e. ∠ APB=90 . So,B(x1, y1) B(x2, y2)
m1.m2 = -1 O
y − y1 y − y2
x−x 1 . x−x 2 = -1.
Or, (y – y1).(y – y2) = -(x - x1).(x –x2).
Or, (x - x1).(x –x2) + (y – y1).(y – y2) = 0
which is the required equation of the circle in diameter form.
Y’
4. Find the general equation of the circle.
Let A (h, k) be the centre of the circle P(x,y)
with radius r and P(x, y) be any point r’
at the circumference of the circle.
Here, PA = r A(h,k)
Or, PA2 =r2.
Or, (x2 –x1)2 +(y2 –y1)2 =r2.
Or, (x –h)2 +(y –k)2 = r2. O’
Or, x2 -2hx +h2 +y2 -2ky +k2 = r2. X’ X
Or, x2 + y2-2hx -2ky + h2 +k2- r2= 0.
Putting -2h =2g, -2k =2f and h2 +k2 –r2 =c. Y’
We get, x2 + y2 + 2gx +2fy +c =0.
This is the general equation of circle.
Y
Some special cases:
1. When touches to X-axis:
A(h,k)
Equation of the circle is,
(x – h)2 + (y –k)2 =r2/k2.
k=r
O
X
X’
h
Y’
h=r A(h,k)
O
X’ X
h
Y’
A(h,k)
h=rr
O X
X’
h
Y’
A(h,k)
r
k
X
X’
h
O
Y’
Concentric – centre of different circles are same.
Concyclic– many points lie on the circumference of a circle.
When does the general equation of second degree ax2 +2hxy +by2 = 0 represent the equation of
circle?
The general equation of second degree ax2 +2hxy +by2 = 0 represent the equation of circle if:
i. Coefficient of x2 = coefficient of y2 i.e. a =b.
ii. Coefficient of xy =0 i.e. 2h =0.
iii. It is the general equation of second degree.
Find the centre and radius of a circle of equation x2 +y2 +2gx +2fy +c =0.
The given equation of circle is,
x2 +y2 +2gx +2fy +c =0.
Or, x2+2gx +y2 +2fy = -c.
Or, x2 +2.x.g +g2 – g2 +y2 +2.y.f +f2 – f2 = -c
Or, x2 +2.x.g + g2+ y2 + 2.y.f + f2= g2 + f2 -c.
2
Or, 2 2
(x +g) + (y +f) = ( √ g2 +f 2 −c ) .
Comparing it with (x –h)2 +(y – k)2 = r2.
:. Centre of the circle, (h, k) = ( -g, -f)
Conic Section:
Cone: A 3-dimensional solid object that has a circular base joined to a point by a curved surface is
called cone.
The point which divides the cone is called vertex.
The line joining the vertex and centre of the circular base is called axis of cone.
A conic section is a curved obtained by the intersection of a plane and a right circular cone.
The rotating line is called generator of the cone.
The vertex divides the cone into two parts called nappies.
Axis
Generator
Upper Nappe
V- Vertex
Lower Nappe
Circle:
The plane curve formed by intersecting a cone with a plane surface making an angle of 900 with
the axis of cone or parallel to the base of the cone is called circle.
Or, If a plane cuts the cone perpendicularly to the axis, then the section formed by the intersection
of the plane and cone is called circle.
A plane perpendicularly intersects a cone not passing through the vertex.
Parabola:
The plane curve formed by intersecting a cone with a plane surface in such way that the plane
surface is parallel to the generator and the angle made by the plane surface with the axis of cone (θ) is
equal to the semi -vertical angle (α) [i.e. θ = α] is called parabola.
Or, If a plane cuts the cone such that it is parallel to the generator of the cone, then the open
curve/section formed is called parabola.
The vertical angle of a cone is 800. If the cone is intersected by a plane so that a parabola is
formed, the angle between the axis of cone and the plane surface is 400.
Ellipse:
The plane curve formed by intersecting a cone with a plane surface making an angle of θ with
the axis of cone in such a way that the value of θ is greater than semi-vertical angle (α) and less than
900[i.e. α < θ <900] is called ellipse.
Or, If a plane cuts cone such that the angle made by the plane with the axis is greater than the semi-
vertical angle, then the closed curve/section formed is called ellipse.
Intersection plane is parallel to the generator of the cone.
The vertical angle of a cone is 840. If the cone intersected by a plane so that an ellipse is
formed, the possible values of angle between axis of cone and plane is > 420(more than 420).
Hyperbola:
When the plane intersects both the nappies, then the section is called hyperbola.
Or, When the cutting plane is included to the axis such that it also cuts the other part of the double
cone, then the section so formed is called hyperbola.
Or, A plane curve formed by intersecting a double napped cone with a plane in such a way that the
angle made by the plane surface with the axis of cone (θ) is less than semi-vertical angle (α) [i.e. θ < α]
is called hyperbola.
Intersection plane is parallel to the axis of cone.
The vertical angle of a cone is 700. If the cone intersected by a plane so that an hyperbola is
formed, the possible values of angle between axis of cone and plane is < 350(less than 350).
O
X’ X
19. Write the interval notation for the given number line.
X’ X
1 2 3 4 5 6 7 8
g2
X’ O X
a=2
X’ O X
1
22. Write the point of discontinuity if function f(x) = x+1 .
23. Write the interval of the given function.
Y
f3
X’ X
O a b
Y’
Matrix: 2(b)
1. Define the following:
a. Singular matrix c. Inverse matrix e. Non-singular matrix
b. Triangular matrix d. Upper triangular matrix f. Upper triangular matrix
2. Under what condition the system of simultaneous equation has no unique solution?
3. Under what condition, the inverse of a matrix is possible?
4. If AB =BA =I, what types of matrices are A and B?
a c 1 d −b
( )
5. If A = b d , what does ad−bc −c a
( )
denote?
6. What is the determinant of a 2×2 identity matrix?
7. According to Cramer’s Rule, write the value of Dy in the equations a1x +b1y =c1 and a2x +b2y
=c2.
a c
8. What are the elements of secondary diagonal of a matrix
( )
b d ?
9. What is the value of (A-1)-1?
2 5
10. If
( )
6 x is a singular matrix, find the value of x.
11. If A =[4] then find |A| .
1 2
| |
12. Evaluate: 3 4 .
13. A,B and X are three matrices. If AX =B and |A| ≠0, what is the value of X?
14. A,B and X are three matrices. If XA =B and |A|
≠0, what is the value of X?
15. In a matrix, the product of elements of leading diagonal is m and the product of elements of
secondary diagonal is n. Find the determinant of the matrix.
16. Express the equations ax +by =c and mx +ny =p into matrix form.
17. If A =
(ab cd ) then what does
(−bd −ca ) denote?
18. If the determinant of coefficient of x and y i.e.(D) =18, determinant of coefficient of x and
constant term (Dy) = then using Cramer’s rule, find the value of y.
SEE Question No. 3(a and b) [Co-ordinate Geometry}
Conic Section:
1. Define the following terms:
a. Conic section c. Cone e. Hyperbola
b. Ellipse d. Circle f. Parabola
2. Which geometrical figure is formed if a plane intersects a cone parallel to its base?
3. If the intersection figure is parallel to the generator of cone then what conic does it form?
4. A plane perpendicular to the axis of cone intersects a cone not passing through the vertex.
Name the section so formed.
5. A plane cuts the right cone not passing through its vertex and semi vertical angle α is less than
angle made by the plane to the axis of cone. Name the section so formed.
6. In which condition, ellipse is formed?
7. In which condition, parabola is formed?
8. In which condition, hyperbola is formed?
9. If the intersection plane is parallel to the axis of cone then what conic does it form?
10. The semi vertical angle of a cone is α and the angle made by the plane with the axis of the cone
is θ. If θ =α, what is the name of the conic section formed by the intersection of the plane
surface and cone?
11. The semi vertical angle of a cone is α and the angle made by the plane with the axis of the cone
is θ. If α < θ < 900, what is the name of the conic section formed by the intersection of the plane
surface and cone?
12. What does AO represent in the figure? O
C B
A
13. The semi vertical angle of a cone is α and the angle made by the plane with the axis of the cone
is θ. If θ < α, what is the name of the conic section formed by the intersection of the plane
surface and cone?
14. The semi vertical angle of a cone is 500. If the plane surface intersects the cone making an
angle of 600 with the axis of cone, write the name of the conic section so formed.
15. The semi vertical angle of a cone is 450. If the plane surface intersects the cone making an
angle of 450 with axis of the cone, write the name of the conic section so formed.
16. The semi vertical angle of a cone is 500. If the plane surface intersects the cone making an
angle of 900 with the cone, write the name of the conic section so formed.
17. The semi vertical angle of a cone is 700. If the plane surface intersects the cone making an
angle of 550 with the axis of cone, write the name of the conic section so formed.
Circle:
1. Write the name of the locus represented by the equation x2 +y2 =r2.
2. State the diameter form of the equation of the circle.
3. A circle has the centre at (-4, -5) and touches X-axis. What is its radius?
4. Under what condition will r =k of a circle with centre (h, k) and radius ‘r’ units?
5. Which axis does the circle (x -4)2 +(y -2)2 =16 touch and why?
6. Find the centre and radius of circle (x -4)2 +y2 =33.
7. If two circles with centres P and Q touch externally at a point A then write the relation among
PA, QA and PQ.
8. If two circles with centres P and Q touch internally at a point A then write the relation among
PA, QA and PQ.
2 2
9. What do √ g +f −c and (-g, -f) represent in the equation of circle x2 +y2 +2gx +2fy +c
=0?
10. State the equation of circle whose centre is (a, b) and radius ‘r’?
11. If the equation x2 +y2 +2gx +2fy +c =0 represents equation of the circle then find the radius of
the circle.
12. If the equation x2 +y2 +2gx +2fy +c =0 represents equation of the circle then find the centre of
the circle.
13. Under what condition will r =h =k of a circle with centre (h, k) and radius ‘r’?
SEE Question No. 4(a and b) [Trigonometry]
Multiple and Sub-multiple angles, Transformation of Trigonometric ratios,
Conditional trigonometric Identities, Trigonometrical Equations and Height
and Distance:
1. Define multiple angles.
2. Define sub-multiple angles.
3. In sin(A +B) = sinA.cosB +cosA.sinB, if A =B then which formula will be formed?
4. Express sin2P –sin2Q into product form.
5. Express cos2M +cos2N into product form.
6. If A +B +C =πc, express cos(4A +4B) in terms of angle 4C.
7. Express cos4A in terms of cos2A.
8. If tanA =z then what is tan2A?
A B
( + )
9. If A +B +C =π , express cot 2 2 in terms of angle C.
c
B E
C D
11. Express 2cosθ.sinβ in sum or difference form.
12. Express cosA - cosB in terms of product of cosine.
13. Express sinα + sinβ in terms of product of sine or cosine.
14. Express 2sinx.cosy in the sum or difference form.
15. In the figure, which is greater between α and θ. A
α θ
B C
2a D 3a
A
16. Write the relation between tan A and tan 3 .
17. Write the relation between sin3A and sinA.
18. Define angle of depression.
19. Define angle of elevation.
A
20. Write tanA in terms of tan 2 .
21. If A +B +C =πc, express sin (B +A) in terms of angle C.\
22. Express sin2A in terms of tanA.
23. What are the values of θ in sin2θ +cos2θ =1?
24. If tanθ + √ 3 =0, 00⦤ θ ⦤ 1800, what is the value of θ?
25. If cos(3600 –θ) =x then what is x?
26. Is secA =cosecA, what is the acute value of A?
27. If x ⦤ cosθ ⦤ y, write the values of x and y.
SEE Question No. 5(a and b)
Vector: 5(a)
1. State the condition of perpendicularity in scalar product of two vectors.
2. What is the scalar product of two vectors ⃗a and
⃗b if the angle between them is θ?
3. What should be the angle between ⃗a and
⃗b to get the maximum value of ⃗a .
⃗b ?
4. If
|⃗a|=m,|⃗b|=n
, ⃗a .
⃗b =p and the angle between ⃗a and
⃗b is 600, write the relation
among m, n and p.
5. If
⃗i is the unit vector along X-axis, what is the value of
⃗i 2
?
m⃗
OB+n ⃗
OA
OP=
⃗
6. What do m and n represent in the formula m+n ?
7. State the section formula for external division.
1
OG= ( ⃗
⃗ OA +⃗
OB+ ⃗
OC )
8. ∆ABC is triangle such that 2 and O be the origin, write the special name
of the point G.
9. If ⃗p =(a, b) and ⃗q =(b, a), what is the value of ⃗p . ⃗q ?
10. If the sum of position vectors of vertices of a triangle is 6
⃗i +9
⃗j then find the position vector of
its centroid.
11. If ⃗a =k ⃗b ,what is the angle between ⃗a and
⃗b where k is a scalar quantity?
12. What should be angle between a⃗ and
⃗b to get the maximum value of a⃗ .
⃗b ?
13. What should be angle between ⃗a and
⃗b to get the minimum value of ⃗a .
⃗b ?
14. If
⃗j is the unit vector along Y-axis, what is the value of
⃗j 2
?
A B
⃗i = 1 ⃗j= 0
16. If 0 () and
()
1 then find ⃗i . ⃗j ?
2
17. If
|⃗a| =4 then find |⃗a| .
√3
18. If ⃗a and
⃗b unit vectors and ⃗a .
⃗b = 2 , find the angle between ⃗a and
⃗b .
M A
20. Define triangle law of vector addition.
Transformation: 5(b)
1. What are the four fundamental transformations?
2. State the single transformation when the reflection in X-axis is followed by the reflection in Y-
axis?
3. If F be the reflection on y =x and G be the reflection on Y-axis then state what does GoF represent?
4. F:(x, y) →(2x, y) and T: (x, y) →(x ,y -1) are any two transformations. Find the combined
transformation FoT.
a c
() ()
5. If T1 = b and T2 = d , find T1T2.
6. A rotation R1 [(0, 0); x0) is followed by R2[(0, 0); y0]. What is combined rotation?
7. What is the single enlargement of two successive enlargements defined by E1[(a, b), m] and E2[(a,
b); n]?
8. Find the co-ordinates of the image of a point P(x, y) when it is first rotated by 900 about the origin
and then reflected on the X-axis. Also, write down the single transformation which represents both
of these two transformations.
9. Define inversion transformation.
10. State inversion point.
11. Where is the inverse of P if point P is outside the circle of inversion?
12. Write the formula to find P’(x’, y’) if P’(x’, y’) is the inversion point of P(x, y) in a circle with
centre at origin.
13. Write the formula to calculate x’ if P’(x’, y’) is the inversion point of P(x, y) of a circle whose
centre is at (h, k) and radius ‘r’.
14. In a circle with centre O and radius ‘r’, P’ is the inversion of P. If Op =2cm and OP’ =8cm, find the
value of r.
15. In the figure of the inversion circle,
A’ is the inverse of A. If r =8cm then
find the measure of OA ×OA’. r
O A’ A
O P P’’
a.
−1 0
( )
0 1 b.
( )
2
0
1
2 c.
1 0
( )
0 1 d.
3 0
( )
0 3 e.
(−10 −10 ) f.
(a0 0a )
20. Find a 2×1 matrix which transforms a point (a, b) into the point (a +2, b-3).
21. In an inversion transformation if P’ is image of P and r is radius of inversion circle with centre
O, write the relation of OP.OP’ and r.
22. Write down the matrix associated with identity transformation.
23. What is the matrix to represent an enlargement of scale factor k with centre (0, 0)?
24. In a circle with centre O and radius ‘r’, the image of P is P’. If r =4cm and OP’ =2cm, find the
measure of OP.
25. Write down the matrix associated with the rotation through +900 about the origin.
26. State the single transformation when the reflection in x =y is followed by reflection in x =-y.
27. Find the transformation matrix from the equations x’ = -y and y’ = x.
28. What does (h, k) represent in the formula (x’, y’) =
r 2 ( x−h) r 2 ( y−k )
(
h+ 2
( x−h) +( y−k )
2
,k+ 2
( x−h ) +( y−k )
2 )?
5 … 8 …
7 … 6 …
9 … 10 …
Polynomials:
1. If x3 -19x -30 =(x +2).Q(x), find Q(x) by using synthetic division method.
2. Find the remainder when x3 –x2 +1 is divided by (x -2), using remainder theorem.
3. If polynomial x4 +5x3 –kx2 +7x +10 is divided by (x+1), the remainder is 12, find the value of
k.
4. Find the value of k, if f(x) =x3 +4x2 +kx +6 is exactly divisible by (2x -1).
5. A polynomial is expressed as 3x3 +x2 +x +1 =(x -1).Q(x) +R, find the values of Q(x) and R.
6. If (x +1) is a factor of polynomial f(x) =x3 -6x2 –x +k, then find the remainder when f(x) is
divided by (x -2).
7. The polynomial f(x) =2x3 +3x2 +kx +4 leaves a remainder 2(4 –k) when divided by (x -2). Find
the value of k.
8. If p(x) =x2 -3x +5 and q(x) =x3 -5x2 +x +2, find p(x).q(x) and its degree.
9. Using synthetic division to find the quotient and remainder: (y3 +y2 -20) ÷(y +2).
10. If (x –a) is a factor of x3 –mx2 -2nax +na2 then show that a =m +n.
11. If (x -1) is a factor of p(x) =ax4 +bx3 +cx2 +dx +e then show that a +b +c +d +e =0.
12. Find the remainder when x30 +2x20 +11x10 -6 is divided by (x -1).
13. Find the remainder when p(x) =x3 -6x2 +2x -3 is divided by 3x -1.
14. If (x –m) is a factor of x3 –mx2 -4x +m +12 , calculate the value of m.
15. What must be added to x3 -6x2 +11x -8 to make it a polynomial having a factor (x -3)?
16. Use remainder theorem, to determine whether (x -2) is a factor of x6 -64 or not?
17. The polynomial px2 -11x -6 has a factor (5x +2). Find the other factor.
18. What number should be subtracted from 3x2 +5x so that the resulting polynomial leaves the
remainder 1 when divided by (2x +5)?
19. A polynomial p(x) is divided by 4x +3 to get the quotient 2x2 -3x +1 and remainder 4, find the
p(x).
20. If (x -2) is a factor of xk -3xk-1 +4x -4, find the value of k.
21. One factor of x2 –kx +6 is (x -3). Prove that (x –k) is a factor of x2 -7x +10.
22. For what value of k, f(x) =3x3 +3x +k and f(-1) =0?
d−b
23. If x2 –ax +b and x2 –cx +d both have a factor x –m then prove that m = c−a .
24. Prove that the polynomial p(x) =(2x +1).(x -2). (2x -3) -3 has a factor (x -1).
25. If a common factor of polynomial x2 +px +q and x2 +mx +n is (x +a) then prove that:a(m –p)
=(n –q).
26. If a polynomial 4x4 –(p +1)x2 +8x +14 is divided by 2x +1, leaves the remainder 8.5. find the
value of p by using remainder theorem.
Sequence and Series:
1 1 1 1
+ + +.. .. . ?
1. Is 512 a term of the series 2 4 8
2. If the 5th term of an AS is 19 and 8th term is 31, which term is 67?
3. The product of 10th,12th, 14th and 16th terms of a GP is 1296. Find the 13th term.
4. The first and fifth terms of a GP are 2 and 1250 respectively, find the common tratio.
5. If a, m, b are in GP, prove that m = ±√ ab .
6. The ninth term of an arithmetic series is 4. Find the sum of the first seventeen terms.
1
7. The geometric mean between 9 and b is 2. Find the value of b.
8. A girl saves Rs.400 during one month, Rs.800 in the next month, Rs.1600 in the third month. If
she continues her saving in this sequence, find her saving in 8th months.
1 781
9. How many terms can be inserted in the gap of 5 +1 +5 +………. = 5 ?
10. If the first term of a geometric series is 8 and common ratio is 3, find the third term and eight
term.
11. If the first and fifth terms of a Gs are 625 and 1 respectively. Find the common ratio of the
series.
12. Find the sum of first eight powers of 4 starting from 41.
13. Find the sum of 15 +30 +60 + ….. to 9 terms.
14. If the nth term of the series 80 +70 +60 +….. is zero, find the value of n.
15. If 25, m +1, 35 is an arithmetic sequence then find the value of m.
16. Two numbers are in the ratio 5:3. If their arithmetic mean is 40, find the numbers.
17. How many terms are there in the series 5 +9 +13 +…… +77?
18. If a, a -2, a+1 are in geometric sequence, find the value of a.
19. Find the fifteen term of a geometric sequence 2, 4, 8, 16,……..
20. Find the common ratio of a Gs, whose 1st term is 2 and 3rd term is 242.
1
21. If 3 , p, q, 9 are in the geometric sequence, find the values of p and q.
22. Which term of the series 5 +9 +13 +….. is 85? Find it.
23. The third term of a geometric series is 3, find the product of its first five terms.
24. Which term of the series 3 +6 +12 +….. is 192? Find it.
1
25. Find the sum of the series 9 +3 + 1 + ……….+ 27 .
26. Find the sum of first 20 odd natural numbers.
27. If the geometric mean is 4 between 2 and x, find their arithmetic mean.
28. If the 1st term is 2 and the last term is 32 of a GS, find three geometrical means.
29. Calculate the arithmetic mean and geometric mean between 3 and 27.
30. Find the 12 term from the end of an arithmetic sequence 3, 5, 7, 9, ……, 201.
31. If the 1st and 3rd terms of an AS are (a3 +b3) and (a3 –b3) respectively, what is its 5th term?
32. The 1st term of an As is 12. If 24th term is 240 then find the sum of first 24th term.
2
a
33. If arithmetic mean between a and 3 is 20, find the value of a.
5
34. One number is reciprocal to another and the AM between them is 4 . Find the numbers.
35. Insert 2 arithmetic means between 5 and 20.
36. If k2, k2 +1 and k +6 are in an AP, find the value of k.
37. In an AS, 24th term is 240 and the sum of first 24 term is 3600. Find the first term.
38. The sum of first 23 terms of an AS is 1035. Find the 12th term of the series.
39. If the sum of first five terms of an As with 1st term 16 is 120, find the common difference.
40. The product of the first five terms of a geometric series is 512. Find the third term.
41. Which term of the AP -75, -70, -65,….. is the first positive term?
42. If (p +100 is geometric mean of (p +2) and 9(p +2), find the arithmetic mean.
43. Find AM and GM between 16 and 25 and show that AM > GM.
44. If AM and GM are arithmetic mean and geometric mean, prove that AM > GM.
45. 5, x, y, 11 is an arithmetic sequence. Find the values of x and y.
46. Show that {an} ={3n +5} is an arithmetic sequence and find 10th term.
47. The sum of first n terms of an AP is 3n2 +2n. Find the common difference of the AP.
48. In a sequence tn =5n -2, find sn.
49. The sum of first five terms of an AP is 65, find the third term.
50. If the sum of n terms of an AP is 3n2 +5n and its mth term is 164, find the value of m.
51. The length of sides of a quadrilateral form an AS. If the perimeter of the quadrilateral is 28cm
and the shortest side is 4cm long, find the length of other sides.
Linear Programming and Quadratic Equation):
3 x +2 y
≤1
1. Show 15 in a graph. Y
2. Write down the inequality represented O
X
by the shaded region in the figure. X’
B
y=5x+a
A(2,-3)
Y’
3. The curve of a cubic equation passes through the origin contains the point (-4, 32). Find the
cubic equation.
4. Find the equation and Y-intercept Y
of the parabola shown in the graph.
(-1,3) (1,3)
2
X’ X
O
Y’
5. Find the minimum value of the objective function Z =7x +3y when the vertices of a polygonal
feasible region are R(7, 0), A(0, 7) and O(0, 0).
x y
+
4 k
6. If the point (3, 4) lies in the solution set of > 4, find the possible value of k.
7. Write down the corresponding inequality Y
represented by the shaded region in the graph.
A(0,4)
X’ X
O B(4,0)
Y’
8. Find the equation of the parabola which passes
through the point (4, 32) and vertex lies at the origin. Y
9. Without drawing the graph, find the vertex
of parabola x2 +2x -3 =0.
10. Find the inequality of half-plane that satisfies P
the point A with respect to the line PQ.
A
Q
X’ X
2
11. Write the standard equation of a parabola and find the vertex of Oy =x -2x +1 =0.
12. Find the inequality that represents Y
the shaded region in the given figure. Y’
A(0,4)
B(3,0)
X’ X
O
Y’
1
13. Draw (2x -1) ≥ 2 (x +13) on a graph and shade the region which represents its solution.
14. The parabola of a quadratic equation is symmetric with Y-axis. If it passes through (0, 0) and
(2, 4),
find the equation.
15. Show the inequality 4x +5y ≥ - 20 on a graph.
16. Adjoining figure represents the sketch of Y
the graph y =x2 +4x -5. It cuts the X-axis
at P and Q. what are the co-ordinates of P
and Q? what do these X-co-ordinates denote?
O
X’ X
P Q
Y’
17. What will be the points of intersection of the curve f(x) = x2 -1 and f(x) =3?
18. Find the X-intercept and Y-intercept of the parabola given by the equation y =x2 +4x.
19. From the given information,
find the co-ordinates of points A, B and C. Y
y =x2-3
A(….,1)
B(2,….)
O
X’ X
P
C
Y’
20. If the inequality ax +2y ⦤ 6 satisfies the point (4, 5) then find the value of a.
3. If M=
(3k4 −2k ) and the value of its determinant is 26, find the value of k.
2 m 7 and 9 n
4. If the matrices
( 5 9 ) (−5 4 ) are inverse matrices to each other, calculate the value
of x and y.
1 2
5. If the inverse of the matrix A is given by
( ) 3 4 then find A.
2
11. If A =
(−47 58 ) , B=
(4x 63 ) and |A−B−5 I|=14 , find the value of x.
x−3 x−1
12. For what value of x, the matrix A = 2 2 x−2 ( ) has no inverse?
−1 2 −2
13. If
( ) ( )
2 −2 ×B = 4 , find the matrix B.
14. For what value of k, the equations x +2y =8 and 2x +ky =4k -1 have Dx =5 –k?
1 −5 8 −5 1 8
D=| |,D x =| | D y =| |
15. If 6 11 7 11 and 6 7 then write the corresponding equations of
these values.
23. If M =
[12 43 ] and N =
[05 −2−1 ] then find the value of |M N|
T
.
3 1 1 2
24. If A = 4 2
( ) and B = 3 5
( ) then find the value of |AB| .
p 3 1 3
( )
25. If P = 2 1 and Q = 2 4
( ) , for what value of p, AB is a singular matrix?
X=y=7
21. In the figure, line l1 and l2 are parallel.
L2
What is the value of k?
2x+ky=7
3 4 7
− + =0
22. The lines given by the equations y x xy and 4x –my -5 =0 are perpendicular to each
other. Find the value of m.
Angles between two lines:
1. Find the separate equation of the line represented by the following equations. Also find the
angles between them.
a. 2x2 +7xy +3y2 =0 d. 3x2 -8xy -3y2 =0 g. x2 +x –y –y2 =0
b. 3x2 -5xy -2y2 –x +2y =0 e. x2 -2xycosecα +y2 =0 h. ab(x2 +y2) –xy(a2 +b2) =0
1 1
c. x2 +2xysecβ +y2 =0 f. 2 x2 +2xy + 2 y2 =0 i. x2 – 2xycot2α –y2 =0
2. Find the single equation for the pair of lines represented by 3x +2y =0 and 2x -3y =0.
3. Prove that the angle between the lines represented by the equation 5x2 -6xy -5y2 =0 is a right
angle.
4. For what value of m, the two lines represented by 3x2 +8xy +my2 =0 is orthogonal to each
other?
5. Find the value of k, if the lines represented by the equation 16x2 –kxy +9y2 =0 are coincide?
6. Find the single equation of the lines represented by y =xsinθ and y +xsinθ.
7. Find the single equation to represent x +2y =5 and Y-axis.
8. Prove that an acute angle between the lines represented by (p2-3q2)x2 +8pqxy +(q2 -3p2)y2 =0 is
600.
9. If the angle between the lines represented by the equation x2 +2mxy +y2 =0 is 600. Find the
value of m.
10. If (a +b)x2 +5xy –(2a –b)y2 =0 represents two straight lines perpendicular to each other, write
the relation between a and b.
11. If (a +1)x2 +4bxy +5y2 =0 represents two parallel straight lines, write the relationship between a
and b.
x y
=2 =2
12. Find the homogeneous equation of second degree from the pair of lines y and x .
13. Find the equation of lines represented by x(x +y –c) –yc =0.
14. Find the equation of lines represented by abx2 +a2x +b2x +ab =0.
15. If the lines (k +3)x2 +2(k -3)xy +(k -3)y2 =0 are coincident, what is the value of k?
16. Prove that the lines represented by 9x2 +12xy +4y2 =0 are coincident.
17. In the figure, AB and CD are passing
through origin. If the points (-3, 2) and
(4, 4) are in the lines AB and CD respectively
then find the joint equation of AB and CD. Y
A
C
(4,4)
(-3,2)
X’ X
O
D B
Y’
5 18 25
18. Find the value of p, if the lines represented by the equation 6 x + 13 xy +(p + 6 ) y2
2
=0.
Conic Section:
1. The vertical angle of a cone is 600. If the cone is intersected by a plane so that a hyperbola is
formed, what will be the possible value of angle between axis of cone and the plane?
2. The vertical angle of a cone is 840. If the cone is intersected by a plane so that an ellipse is
formed, what will be the possible value of angle between axis of cone and the plane?
3. The vertical angle of a cone is 800. If the cone is intersected by a plane so that a parabola is
formed, find the angle between axis of cone and the plane surface?
Circle:
1. If the radius of the circle x2 +y2 -6x -4y +k =0 is 2 units, find the value of k.
2. Find the co-ordinates of the centre and radius of the circle of equation x2 +y2 -10x -4y =7.
3. If the centre of circle x2 +y2-ax –by -12 =0 is (2, 3), find the value of a and b.
4. Find the co-ordinates of the centre of a circle having equations of two diameters x –y = -1 and
2x +y =13.
5. Find the length of circumference of a circle having equation x2 +y2 -2y -48 =0.
6. Find the equation of the circle having centre (3, 4) and passes through the point (7, 7).
7. Find the equation of the circle having centre at (5, 4) and that touches the Y-axis.
8. Find the equation of circle whose two ends of diameter are (-1, 2) and (0, -4).
9. The centre of a circle having radius 6 units lies in the 1 st quadrant. If the circle touches the X-
axis at (5, 0), find the equation of the circle.
10. The centre of a circle having radius 4 units lies in the 2nd quadrant. If the circle touches the Y-
axis at (0, 3), find the equation of the circle.
11. Find the equation of the circle which touches both axes and has its centre on the line x -2y =3.
12. Find the points on X-axis where the circle with equation x2 +y2 -8x -8y -9 =0 intersect.
13. Find the points on the line y =3, where the circle with equation 2x 2 +2y2 -5x +7y -36 =0
intersect.
14. If the length of a chord of a circle with equation x 2 +y2 =100 is 16 units, how far is the chord
from the centre?
15. When does the general equation of second degree ax 2 +2hxy +by2 +2gx +2fy +c =0 represent
equation of the circle?
16. What is the length of radius of the circle having centre at P(3, 4) and that touches the Y-axis at
(0, 4)?
17. Find the equation of the circle whose centre is (2, -1) and which just touches the line 3x -4y +1
=0.
18. Find the equation of the given circle.
a. Y
Y b.
B OB=30units
(6,3) OA=16units
P
X’ X’ X
O A
O
X
Y’
19. If the equation of a circle is x2 +y2 -6x +4y -23 =0, find the length of diameter of the circle.
20. If the radius of adjoining circle is 5 units then find the equation of the circle.
Y
5 X
O
21. Find the equation of circle having centre (4, 5) and radius 5 units. Also find a point at the
circumference.
22. Find the length of the chord of the circle with equation x 2 +y2 -14y =51 which is at a distance of
6 units from the centre.
23. Find the equation of the circle having centre (0, 3) and area 154 sq. units.
24. Find the equation of the circle passing through the point 91, 2) and touching both axes.
SEE Question No. 9(a, b and c)[Trigonometry]
√3−1
2 √2 .
√3 1
4. a. If cos 300 = 2 , find the value of cos150. b. If cos450 = √2 , prove that:
0
1
tan 22 =√ 2−√ 2
2 .
A Β 1 1
= ( a+ )
5. a. Express sinA in terms of cot 2 . b. If cos 3 2 a then prove that cosB=
1 3 1
(a + 3 )
2 a .
sin A
6. Express 1+cos A in terms of sub-multiple angle of tangent.
b α 3 117
=
7. i. If tanA = a , prove that acos2A +bsin2A =a. ii. If sin 3 5 , prove that sinα = 125 .
√3 2−√ 3
8. If cos330 =0 2 2 0
, prove that: sin 165 = 4 .
α 5
9. If tan 2 = 12 , find the value of sinα, cosα and tanα.
10. Find the value of : sin700 –cos800 +cos1400.
11. Express cos8A.cos6A in the sum or difference form.
12. Evaluate: a. sin750 -sin1050. b. Cos150.cos750.
c
13. If A +B +C =π and cosA =cosB.cosC then prove that: tanA =tanB +tanC.
14. If A +B +C =πc and sinA =sinB.sinC then prove that: tanB +tanC =tanB .tanC.
15. Without using calculator or table, find the value of cos67.50.
16. Without using calculator or table, find the value of cos360 +cos1080 –cos3240 –cos4680.
17. Without using calculator or table, find the value of cos180 +cos540 –cos1620 –cos2340.
18. Prove the following:
1−tan 2 (45 0− A ) sin 2 A−cos A
2 0
=sin 2 A =cot A
a. i. 1+tan (45 + A ) . ii. 1−sin A−cos2 A .
1 1+cos θ+sin θ θ
=cot
b. i. Cos(450 +θ).sin(450 –θ) = 2 (1- sin2θ). ii. 1−cos θ+sin θ 2 .
cos 8 0 +sin 80 3
sin 3 A +sin A
0 0
=tan 530 3
=cot A
c. i. cos 8 −sin . ii. cos A−cos 3 A
d. i. Cos2A =cos2A –sin2A. ii. Sin550 +sin350 = √ 2sin 80 0 .
e. i. Sin700 –cos800 –cos400. ii. Sin3A =3sinA -4sin3A.
πc θ πc θ 2sin A+sin2 A A
cosec ( + ). cosec ( − )=2 secθ =cot 2
f. i. 4 2 4 2 . ii. 2 sin A−sin 2 A 2 .
1−cosα 1+sin θ−cosθ θ
=tan
g. i. Tanα = sin α . ii. 1+ sinθ +cos θ 2 .
1 A A 1+ sin2 α
(cot −tan ) =tan α
h. i. cotA = 2 2 2 . ii. 1+cos α+cos 2 α .
1+cos2 β 1+cos 2 β
=cot2 β =cot β
i. i. 1−cos 2 β . ii. sin 2 β .
j. i. Cos4A –sin4A =cos2A. ii. Cos18 –sin18 = √ 2 sin180.
0 0
α tan α+ sin α θ
k. i.
cot2 =
2 2 tan α . ii.
(
tan 450 +
2 ) =s ecθ +tanθ.
l. i. Sin460 +cos760 –cos160. ii.cos5θ +cos3θ = 2cos4θ.cosθ.
y
12cm
300 450
600 450
C y B D C
B D x
x 30cm
1. If
⃗a +b⃗ +⃗c =0,|⃗a|=3,|b⃗|=5
and
|⃗c|
=7, find the angle between ⃗a and b .
⃗
2. Find the position vector of a point which divides the join of P(4, 6) and Q(5, -3) in the ratio 2:3
internally.
3. If ⃗a = 2 i −4 j , find the vector perpendicular to
⃗ ⃗ ⃗a whose length along Y-axis is 5 units.
4. In the figure, AM is median of ∆ABC.
1 A
AM = ( ⃗
⃗ AB+ ⃗
AC )
Prove that: 2 .
B C
M
5. If b = 6 i −2 j , find the vector perpendicular to b whose length along X-axis is 3 units.
⃗ ⃗ ⃗ ⃗
6. D is the mid point of side BC of ∆ABC. If the position vectors of the points A and D are
3 ⃗i+5 ⃗j and 3 ⃗i−4 ⃗j respectively, find the position vector of centroid (G) of ∆ABC.
7. In the figure, OA=⃗a , ⃗
⃗ OB= ⃗b ,⃗
OM=⃗m and O
⃗a + b⃗
m=
⃗ b
M is the mid point of AB
⃗ . Prove that: 2 .
A B
M
D
B C
AB= 3
⃗
() CD= 4
⃗
( )
12. ABCD is a parallelogram where 5 and −1 . Find the position vectors of
diagonal AC
⃗ and BD
⃗ . O
A B C
2 2
15. if ⃗p and ⃗q are perpendicular to each other, prove that (⃗p +2⃗q ) =(⃗p −2 ⃗q ) .
16. Find a vector whose magnitude is 7 and parallel to ⃗a =4 i⃗ +3 ⃗j .
17. The position vector of A and B are 6 i −3 j and 2 i⃗ +4 ⃗j respectively, then find the position
⃗ ⃗
vector of C in which B divides AC externally in the ratio 3:2.
18. If OA=7 i⃗ −5 ⃗j
⃗ and OB=5 ⃗i−7 ⃗j , find the value of ∠AOB.
⃗
OA= √ 3 OB= √3
19. If
⃗
(1) and
⃗
( )
3 √3 , find the value of ∠AOB.
O
20. In the figure, OL=⃗l , ⃗
⃗ OM=⃗m and ON=3⃗m−2 ⃗l
⃗ then
prove that LN=3 ⃗
⃗ LM .
O A
express PR
⃗ in terms of ⃗p and ⃗q . p S
P R
D C
⃗a = p ( ) ⃗b = −5
( )
29. If p+2 and 3 are perpendicular to each other, find the value of p.
a⃗ b⃗ 2 ⃗a + b⃗ 2
30. If ⃗a and
⃗b are two unit vectors then prove that:
( +
a2 b2
=
ab )( ) .
31. In the given figure, prove that: AO−⃗
⃗ BO+⃗
BC=⃗
AC D. C
O
A B
32. If ⃗a =6 ⃗i−8 ⃗j and
⃗b =4 i⃗ +3 ⃗j a⃗ and ⃗b
, prove that are perpendicular to each other.
33. In the given figure, prove that: AB−⃗
⃗ CD−⃗
AC=⃗DB .
A D
B C
34. If OA=⃗a , ⃗
⃗ OB= ⃗b . OM=⃗m
⃗ and M divides BA internally in the ratio of 3:2 then prove
1
m= ( 3 ⃗a +2 b⃗ )
⃗
that : 5 .
D
35. In the figure, if AD=2 ⃗
⃗ BC then prove that: AB+ ⃗
⃗ CD=⃗
BC .
A
B C
36. If ⃗p . q⃗ =6,|⃗q|=2 √ 3 unit and the angle between ⃗p and ⃗q is 300, find the length of
⃗p
.
37. In the given figure, ABCD is a parallelogram.
If OA=⃗a , ⃗
⃗ OB= ⃗b and OC=⃗c
⃗ , find OD
⃗ . D C
A B
38. The position vectors of the points A and P are 3 ⃗i+5 ⃗j and
⃗i+4 ⃗j . If P is the middle point
of AB then find the position vector of B.
39. In the given ∆ABC, AB =BC =CA =6cm.
Find the value of AB. ⃗
⃗ AC .
A
6cm
B C
40. In ∆ABC, AD =DC and the point G is the centroid of triangle ABC. If the position vectors of
the points B and D are 3 ⃗i+7 ⃗j and 3 ⃗i−2 ⃗j respectively, find the position vector of G.
41. If ⃗a =3 i⃗ +m ⃗j and
⃗b =6 ⃗i−2 ⃗j are perpendicular to each other, find the value of m.
42. If the position vectors of the vertices A, B and C of ∆ABC are 3 ⃗i+4 ⃗j , 4 i⃗ +5 ⃗j and
5 ⃗i+6 ⃗j respectively, find the position vector of the centroid of the triangle.
43. In the parallelogram, SR=4 ⃗i−2 ⃗j
⃗ and
PR=6 i⃗ +5 ⃗j
⃗ , find QR .
⃗ P
Q
S R
B C
D
⃗a = 2 () ⃗b = 3
( )
46. If 3 and −1 then find a2 and b2.
47. If ( ⃗x +⃗y )2 =( ⃗x −⃗y )2 , prove that ⃗x and ⃗y are perpendicular to each other.
⃗a ⃗b ⃗ 2 =( a⃗ −b⃗ )2
⃗a + b)
48. If and are perpendicular to each other then prove that ( .
49. If
⃗a +b⃗ +⃗c =0,|⃗a|=12,|⃗b|=5 and |c|=√129 then find the value of ⃗a .⃗c .
50. If ⃗a and
⃗b are two vectors of unit length and θ be the angle between them, show that:
1 θ
|⃗a −⃗b|=sin
2 2 .
51. From the given figure, find AP
⃗ and
A
b
O B
52. In ∆ABC, D and E divides Ab and AC in the ratio of 1:2 respectively. Prove that:
1
DE= ⃗
⃗ BC
3 .
53. In what ratio does p divide the line segment AB, where OA=4 i⃗ +4 ⃗j
⃗ , OB=7 i⃗ +7 ⃗j
⃗ and
OC=−i⃗ −⃗j
⃗ .
formula to convert Fahrenheit into Celsius, then find g(x) and gof(x). Also find f -1(770) and g-
1
(550).
x×T×R
27. The amount of a sum of Rs ‘x’ is y =f (x) =x + 100 where T =10 years and R =5%,
a. Find f (5000).
b. Find f-1(x) and f-1(7500).
c. What does f-1(x) represent?
28. Function f(x +2) =3x +5 is given. If f[g(x)+2] = x +3, find g(8).
29. Two linear functions are f and g having 0 image of 0 are given. If f(5) =10 and g(4) =12, find
the inverse function of linear composite function.
x−5 x−2
30. Inverse functions of f and g are f-1(x) = 4 and g-1(x) = 3 respectively. If f-1[g(x) +3]
=3, find the value of x.
Polynomials
1. Solve the following polynomials:
(a) 2x3 + 3x2 – 11x – 6 = 0
(b) y = x3 – 4x2 + x + 8 and y = 2
2. Find the roots of: f(x) = x3 – 4x2 + 5x – 2
3. Factorise: x + 9x2 + 26x + 24
3
4. Find the values of p and q so that (x + 2) and (x – 1) are the factors of the polynomial:
x3 + 10x2 + px + q
5. If the polynomials x3 + 4x2 – 2x + 1 and x3 + 3x2 – x + 7 are divided by x – a leaves the
equal remainder, find the possible values of a.
6. If f(x) = x(x2 – 19), solve for x, f(x) = 30.
7. If the polynomial 2x3 + ax2 + bx – 2 has factor x – 2 and leaves remainder 7 when divided
by 2x – 3, find the value of ‘a’ and ‘b’.
8. Show that 6x3 + 7x2 – x – 2 has the factors (2x – 1), (x + 1) and (3x + 2).
9. Solve: 2x3 + 6 = 3x2 + 11x.
10. A polynomial x3 -4x2 +x +6 has a factor (x -3). Find the other factors.
11. If (x -2) is a common factor of x2 +ax -6 =0 and x3 -9x +b =0, find the values of a and b.
12. If a factor of 8x4 -2x3 -145x2 -216x -45 is (x -5), find the other remaining factors.
13. If 4 times a square of a number and seven times of the number are subtracted from the
cube of a number then it becomes -10, find the possible numbers.
14. If (x2 -1) is a factor of p(x) =ax4 +bx3 +cx2 +dx +e, show that a +c +e =b +d =0.
R Q
X’
O
X
P
Y’
6. Write down the system of inequalities
that describes the shaded region and
find the maximum value of Q = 2x + y – 4. Y
x+y=5
S X
X’’
O R
Y’ x+2y=0
B(2,1)
C(0,1)
X’ X
O A(1,0)
Y’
8. The graph of the function f(x) = ax 2 +bx +c has vertex at (1, 4) and passes through the
point (-1, -8). Find a, b and c. Also show the function in a graph.
9. Find the equation of a parabola with vertex at (-1, 2) and passing through the point (1,
-4).
10. Find the equation of the parabola passing through the points (0, -2), (1, 0) and (2, 4).
(0,5)
(2,1)
X’ X
O
Y’
SEE Question No. 13
2
4−x x≠−2
4. If f(x) =
{
3 x=−2
Y
Y’
4−x x≠1
5. If f(x)=
{
2 x=1 then find the followingY
lim
f ( x)
a. x →1+ .
lim
f (x) Y =f(x)
b. x →1− .
c. f(1).
d. Is f continuous at x =1?
X’ O X
6. Use the graph to find the following: Y
lim
f ( x) Y’
a. x →a−
lim
f ( x)
b. x →a+
lim f ( x)
c. x→a
X’ X
d. f(a) O
2
2x 1
7. If f(x) =5x +2 when x ⦤2 and f(x) =6x when x >2 thenY’examine the continuity or
discontinuity of the function at x =2.
3 x−1 x<2
5
8. Prove that the function f(x) = 2x+1
{ x=2
x >2 is continuous at a point x =2.
9. If f(x) =2x -1 for x < 3, f(x) =5 for x = 3 and f(x) =8 –x for x > 3 then prove that the
function f(x) is continuous at x =3.
10. If the given function is continuous at x =2 then find the value of k, f(x) =
{2kx−1
x−3
x <2
x≥2 .
11. Use the graph to examine the continuity at the given point.
lim
f ( x) Y
a. x →a−
lim
f ( x)
b. x →a+
a=-2
X’ X
O
Y’
lim
f ( x)
c. x→a
d. f(a)
X’ X
O
X
X’
O
Y’
SEE Question No. 14
Matrix
1. Solve by matrix method and Cramer’s Rule both.
a. 3x – 2y = 5 and x + y = 5
4 3 3 2 1
b. + =1 and − =
x y x y 24
1 1 1
c. = and =1
x+ y 5 x− y
x y 5y
d. + =4 and 2 x− =1
4 3 2
6 5y
e. 4 x+ =10 and 2 x− =1
y 2
3 2
f. + =13 and 5y – 3x = 9xy
x y
g. 43x + 2y=256 and 32x – y=27
x 2y 3x 7 y
− =−1 + =1
h. 7 7 and 5 5 .
x +2 y
=1= y −x
i. 8 .
3 x+5 y 5 x−2 y 3 2
= =| |
j. 24 9 4 3 .
k. x sinα –y cosα =sinα and x cosα +y sinα =cosα.
1 1
3
l. 3x +5y = 2 and 6x – 3y = 2
2. One fifth of the difference of two numbers is 3 and one-third of their sum is 7. Find the
numbers by matrix method and Cramer’s Rule.
3. 17 kg of sugar and 4kg of tea cost Rs. 1110 and 8kg of sugar and 2kg of tea cost Rs. 540.
Find the cost of per kg of sugar and tea by matrix method and Cramer’s Rule.
4. If A= (52 −3
−4 )and B=(
4 2
−3 5)
, verify that | AB|=| A||B|
3 2 3 0
If A=(
6 8)
and B=(
0 2)
−1 −1 −1
5. , verify that ( AB ) =B . A
1 a 3 2
If A=( ) , B=(
−5 4 )
2 T
6. and det. Pf A – B is 8, find the values of a.
0 1
2 1 . A −3 2 = 1 0 .
If(
3 2) ( 5 −3 ) ( 0 1 )
7. , find the matrix A.
B C
7. The vertices of a triangle are A(-3, 4), B(-4, 3) and C(-2, 1). If AD is the altitude of
x + 2y + 12 = 0.
D
C
8. In the figure, the equation of BD
is 4x – 3y =10, find the equation
of AC.
B
D(5,4)
9. Find the equation of straight line perpendicular to the line joining (2, 3) and (10, 15) and
dividing it in the ratio 1:2.
10. From the point P(-2, 4), if PQ is drawn perpendicular to the line 7x – 24y + 10 = 0. Find
the equation of PQ and also determine the length of PQ.
11. Find the equation of the straight lines passing through the point (1, 0) and inclined at an
angle of 300, with the line −√ 3 y=4 .
12. Find the equation of a straight line parallel to the line 4x + 5y = 9 and passing through the
point which divides the line segment joining the points (3, 4) and (-4, -10) in the ratio 2:5.
13. Find the co-ordinates of the foot of the perpendicular drawn from (2, 3) to the line
3x–2y=13.
14. Find the equation of the sides of an equilateral triangle whose one of the side is y = 0 and
one vertex is (-1, 2).
15. In the figure, ABCD is a rhombus. D(4,3) C
Find the equation of AC.
(2,-4)
A
16. Find the angles between the lines A1x+B1y+C1=0 and A2x+B2y+CB(-3,-2) 2=0. Also find the
conditions to the parallel and perpendicular.
x y
17. If the line + =1 passes through the point of intersection of the lines x + y = 3 and
a b
2x – 3y = 1 and is parallel to the line y = x – 6, then find the values of a and b.
18. A straight line ‘l’ is perpendicular to the line 3x – 2y + 4 = 0. The area of the triangle
formed by the line ‘l’ and the co-ordinate axes is 27 sq. units. Find the equation of the
straight line ‘l’.
19. If the line my +x =cm passes through the point of intersection of the lines x -23 = -4y and
7x =3y +6 and parallel to the line 5x -4y =6 then find the value of m and c.
20. If the line x cosα +y sinα =p passes through the point of intersection of the lines x =2 and
y =3 and is parallel to the line √3x+ y=2 , find the values of acute angle α and p.
21. ABCD is a square. If the equation of diagonal BD is
A D
x -3y =2, find the equations of AB and BC.
x-3y=2
B C
22. The vertices of ∆ABC are A(2, 4), B(1, 1) and C(5, 1). Find the equations of median AD and
height AE.
23. Find the equation of the line passing through the point (3, -2) and inclined at an angle of
600 to the line √ 3x+ y=1 .
24. Find the equation of the line passing through the centroid of ∆PQR with vertices P(3, 3),
Q(-2, -6) and R(5, -3) and parallel to the line QR.
25. Find the angle between the lines joining the points (1, 2) and (3, 4) and the points (2, 2)
and (5, 2).
26. Find the equation of the straight line which is parallel to 2x +3y =11 and such that the
sum of the intercepts on the axes is 15.
27. Prove that the equation of straight line which passes through the point (acos 3θ, asin3θ)
and is parallel to the straight line x cosecθ –y secθ =a is x cosθ –ys inθ =x cos2θ.
28. Find the equation of the straight line joining the point (4, 1) to the foot of the
perpendicular drawn from the point (3, 2) on the line 2x -3y =1.
(4,0)
X’ X
O 2
B
Y’ D
12. Prove that two straight lines represented by the equation (x 2 +y2)sin2α = (xcosβ –ysinβ)2
makes an angle of 2α.
13. If the lines represented by (a +2)x2 +8xy +(1 -4a)y2 =0 are perpendicular to each other,
find the equation of the lines.
14. In the figure, the joint equation of lines Y
AB and CD is x2 +xy -6x -2y +8 =0.
Identify the equation of line CD and A
D
the angle made by CD with X-axis.
X’ X
O
C
Y’ E
15. If the lines represented by q2(x2 +y2) =p2(y –mx)2 are coincident, prove that
2
p 1
=
q 2 1+ m2 .
Circle:
1. Find the co-ordinates of the centre and radius of the circle given by the equation
2x2+2y2-8x-12y+1=0.
2. Find the equation of the circle passing through the points (6, 6), (5, 7) and (2, -2).
3. Find the equation of a circle concentric with x 2 + y2 – 4x – 6y + 4 = 0 and passing through
(4, -1).
4. Find the equation of a circle whose centre lines on the line x – 4y = 1 and which passes
through the points (3, 7) and (5, 5).
5. Find the equation of a circle having centre (2, 3) and the line 3x + 4y + 2 = 0 touches the
circle.
6. Find the equation of the circle whose two diameters are x + 2y = 4 and x + y = 6 and
circle passes through the point (2, 6).
7. Prove that the points (5, 2), (5, 0), (-1, -4) and (1, 6) are co cyclic.
8. Find the equation of the circle which touches X-axis at (4, 0) and the circle cuts off an
intercept 6 from Y-axis.
9. Find the equation of a circle whose centre lines on the line 2x + y = 6 and touches both
the positive axes.
10. If one end of a diameter of a circle x 2 + y2 – 4x – 6y – 12 = 0 is (2, -2), find the co-ordinates
of the other end and the length of the diameter.
11. A circle touches the lines 3x – 4y = 7 and 3x – 4y + 43 = 0 and has its centre on the line
2x – 3y + 13 = 0. Find its equation.
12. Find the equation of the circle whose centre is the point of intersection of the lines
x+2y– 1=0 and 2x – y – 7 = 0 and passes through a point (4, 1).
13. Find the equation of the circle which touches the X-axis at a point (3, 0) and passing
through the point (1, 2).
14. If the line x + y = 1 cuts a circle x2 + y2 = 1 at two points, find the distance between them.
15. Find the equation of a circle whose centre is at (-4, -5) and equation of the tangent is
3x – 4y + 2 = 0.
16. Find the equation of tangent of the circle x2 + y2 – 2x – 10y + 1 = 0 at the point P(-3, 2).
17. If the centre of the circle x2 + y2 – 12x – 10y + 36 = 0 is (6, 3), find the radius of the circle.
18. Find the equation of circle which touches the X-axis at (-3, 0) and cuts off the intercepts of
8 from the positive Y-axis.
19. Prove that a line y – x = 4 is a tangent to the circle x2 + y2 = 8.
20. Show that circles x2 + y2 = 2 and x2 + y2 + 3x + 3y – 8 = 0 touch internally.
21. Find the equation of a circle with centre at (3, 4) and touching X-axis.
22. Find the equation of the circle touches both the negative co-ordinate axes and has its
centre on the line x – 2y = 3.
23. Find the equation of the circle through the point (4, -2) which touches the axes such that
the whole of the circle lies in the 4th quadrant.
24. Prove that the circle x2 + y2 – 4x – 4y + 4 = 0 touches both the axes.
25. The extremities of a diameter of a circle have co-ordinates (-1, 4) and (3, 0). What length
does the circle intercept on the X-axis.
26. Find the equation of a circle which passes through the points (3, -2) and (-1, 6) and its
radius is 10 units.
27. A circle has radius 5 units and the equations of its two diameters are 2x – y = 5 and
x–3y+5=0. Find the equation of the circle and show that it passes through the origin.
28. Find the equation of the circle whose centre lies in the first quadrant, touches the axis of Y
at a distance 4 units from the origin and cuts intercepts 6 from the axis of X.
29. In the given figure, the centers of
two circles A and B are X and Y X2+y2-2x=6y+1=0
respectively. If the co-ordinates A
of X is (2, 3) and the equation of B
B is x2 +y2 -2x +6y +1 =0, then
find the equation of circle A. X(2,3) Y
30. Find the equation of a circle with centre )2, 3) and passing through the centre of the circle
x2 +y2 -6x +2y +6 =0.
31. Find the equation of the circle concentric with the circle 2x 2 +2y2 +4x -2y +1 =0 and
passing through the point (4, -2).
32. If y –x =2 is the equation of a chord of the circle x 2 +y2 +2x =0, find the equation of circle
of which this chord is a diameter.
33. P(3, 6), Q(10, 7) and R(7, 3) are the points at the circumference of a circle. If ∠PRQ =90 0,
then find the equation of the circle and the equation of radius (RC).
34. The circles are concentric and equation of great circle is x 2 +y2 -4x -6y =3. If the small
circle touches Y-axis, find the equation of small circle.
35. The centre of the circle x2 +y2 –px –qy +9 =0 is (3, 2). Find the value of p and q and also
the radius of the circle.
36. The equation of a diameter of a circle is x –y +1 =0. If one end of the diameter is (3, p)
and other end is (a, 2), find the equation of the circle.
37. Find the equation of the circle which has its centre on the line y =2 and which passes
through the points (2, 0) and (4, 0).
38. Find the equation of a circle with radius 4 units, whose centre lies on the line 13x +4y
=32 and which touches the line 3x +4y +28 =0.
SEE Question No. 16 and 17
Trigonometry (Prove the followings):-
sin2 A−sin2 B
=tan ( A +B )
1. sin A .cos A−sin B .cos B
c
m 1 π
2. If tanA= m+1 and tanB= 2 m+1 , show that: A+B= 4
().
√ 3 − 1 =4 .
0 0
3. a. Cosec2θ+cot4θ=cot θ- cosec4θ. b. sin 20 cos 20
1
3 3
4. a. 4cos θ.sin3 θ + 4sin θ.cos3 θ=3sin4 θ b. Cos θ + sin θ= 8 (5+3cos4 θ).
6 6
1
5. a. Cos400.cos800.c0s1600= - 8 . b. 8sin100.sin500.sin700=1.
1
6. Cosθ.cos(600- θ).cos(600+ θ)= 4 cos3θ.
θ 11θ 3θ 7θ
7. sin 4 .sin 4 +sin 4 .sin 4 =sinθ.sin2θ.
√3
8. a. sin20 .sin30 .sin40 .sin80 = 16
0 0 0 0
.
( cos 4 θ+sin 4 θ )
4 4
9. 4(cos6A-sin6A)=cos2A(4-sin22A). b. 4 cos θ−sin θ =sec2θ(3+cos4θ).
cos14 0 −sin 140
0 0
=cot 590 .
10. cos14 +sin 14
c
1 1 π
11. If sinα= √10 and sinβ= √ 5 , show that α+β=
()
4 .
1+cos 2θ 1+cos θ θ
. =cot
12. sin 2θ cos θ 2 .
sin 2 β
13. If 2tanα=3tanβ, prove that: tan(α-β)= 5−cos2 β .
14. (1+sin2A+cos2A)2=4cos2A(1+sin2A).
α 1 1 1 1
sin = ( p+ ) − ( p3 + 3 )
15. If 3 2 p , prove that sinα= 2 p .
16. 4(cos3100+sin3200)=3(cos100+sin200).
x− y sec8 θ−1 tan 8θ
4 cos2 =
17. a. (cosx+cosy)2+(sinx+siny)2= 2 . b. sec 4 θ−1 tan2 θ .
18. Tanθ+2tan2θ+4tan4θ+8cot8θ=cotθ.
19. (2cosθ+1)(2cosθ-1)(2cos2θ-1)(2cos4θ-1)=2cos8θ+1.
πc 3πc 5πc 7 πc 3
sin4 +sin 4 +sin 4 + sin4 =
20. 8 8 8 8 2 .
sin 400 −sin20 0
0 0
=√ 3
21. cos 220 −cos 200 .
1−cos A+cos B−cos( A+B ) A B
=tan . cot
22. 1+cos A−cos B−cos( A+B ) 2 2 .
0 0 0 0
sin 18 . cos 24 −sin 6 . cos 12
0 0 0 0
=tan120
23. sin 24 .sin 6 +cos6 . cos 36 .
sin θ−sin3 θ+sin5 θ−sin 7 θ
=cot 2θ
24. cos θ−cos 3 θ−cos 5 θ+cos 7 θ .
1 5
25. a. Cos x.sin x= 16 (2cosx - cos3x - cos5x). b. Cos36 .cos72 .cos108 .cos144 = 16 .
3 2 0 0 0 0
πc
26. If A+B= 4 , prove that (cotA-1).(cotB-1)=2.
1
27. If A+B+C=1800 and cosA= cosB.cosC, prove that: cotB.cotC= 2 and
tanA=tanB.tanC.
5 πc 2 πc 5πc 2πc
1+cos . cos =sin . sin
28. 7 7 7 7 .
√5−1
29. a. Sin180= 4 . b.
1 1
− =cot 4 A
tan 3 A+tan A cot 3 A+cot A .
30. (1+tanα-secα).(1+tanα+secα)=sin2α.sec2α.
1 1 x+ y 1
tan =
31. If cosx+cosy= 2 and sinx+siny= 4 , prove that 2 2 .
32. An angle θ is divided into two parts α and β such that tanα:tanβ=x:y, prove that
x− y
sin θ
sin(x-y)= x+ y .
3 1 4
1− sin2 2 θ sin 2 θ
33. a. Cos6θ+sin6θ= 4 . b. Cos8θ +sin8θ =1 –sin22θ + 8
.
34. Cosec160 –cot320 =tan80 +cosec 320.
1
2 2
35. a. Sin A –cos A.cos2B =sin B –cos B.cos2A. 2 2
b. Sin 2A = 8 (3 -4cos4A +cos8A).
4
πc 3 πc 5 πc 7 πc
36.
( 1−cos) ( 8 ) (
.
1−cos
8 .
1−cos
8 ) (
.
1−cos
8 ) 1
= 8 .
c
π A 1+sin A
tan ( + ) 1+sin A
37.
1
4 2
1
√ 1−sin A
1 1
=
A+B
= cos A .
+ = +
38. If sin A cos A sin B cos B , prove that: cot 2 =tanA.tanB.
πc θ πc θ
39.
cosec ( )
+
4 2 .
sec +
4 2 =2secθ. ( )
πc 9π c 3 πc 5 πc
40. 2cos 13 .cos 13 +cos 13 +cos 13 =0.
πc (1−tan A )2
41.
2 sin2 − A
4 ( )
= 1+tan A .
2
πc
c c
6 6 3π 6 5π 7 πc
6 5
sin sin sin sin
42. 8 +
8 + 8 + 8 = 4 .
1
43. Sin4300.sin4900.sin5300 = 8 .
44. Cos2(A +1200) + Cos2(A -1200)+cos2A = 1.5
45. If tan2α =1 +2tan2β, prove that: cos2β =1+2cos2α.
46. tanA +tan(600 +A) +tan(600-A) =3tan3A.
47. sin3A +sin3(600+A) +sin3(2400+A) =sin3A.
k+1
48. If cotB =k cotA, prove that: cosec(A-B) = k−1 cosec(A+B).
cos2 A cos A−sin A 1−tan A
= =
49. 1+sin 2 A cos A+sin A 1+tan B .
Conditional Trigonometry:
If A+B+C= πc, prove the following identities:
1. Sin2A-sin2B+sin2C=4cosA.sinB.cosC.
2. Cos2A+cos3B-cos2C=1-4sinA.sinB.cosC.
A B C
4 sin . cos . cos
3. 1-cosA+cosB+cosC= 2 2 2 .
B+C C+ A A +B
4 sin .cos . cos
4. sinB+sinC-sinA= 2 2 2 .
5. Cos2A-sin2B+sin2C=1-2sinA.sinB.cosC.
A B C A B C
cos 2 +cos 2 −cos 2 =2 cos . cos . sin
6. 2 2 2 2 2 2 .
sin 2 A+sin 2 B+sin 2 C A B C
=8 sin .sin . sin
7. sin A +sin B+sin C 2 2 2 .
8. Cos(B+C-A)+cos(C+A-B)+cos(A+B-C)=1+4cosA.cosB.cosC.
cos A cosB cos C
+ + =2
9. sin B . sin C sinC .sin B sin A . sin B .
c
A B C π −A π c −B π c−C
cos + cos +cos =4 cos . cos . cos
10. 2 2 2 4 4 4 .
11. Tan2A+tan2B+tan2C=tan2A.tan2B.tan2C.
A B C A B C
cot +cot +cot =cot . cot .cot
12. 2 2 2 2 2 2 .
B−c C−A A−B
4 sin . sin . sin
13. Sin(B+2C)+sin(C+2A)+sin(A+2B)= 2 2 2 .
14. sinA.cosB.cosC + sinB.cosC.cosA + sinC.cosA.cosB = sinA.sinB.sinC.
A B C B+C A+C A +B
sin2 +sin2 +sin2 1−2 sin . sin . cos
15. 2 2 2 = 2 2 2 .
16. Cos22A +cos22B +cos22C =1 +2cos2A.cos2B.cos2C.
A B C
17. Sin(π –A - B) +sin (π –B –C) +sin(π –c –A) =4cos 2 .sin 2 .sin 2 .
18. If B+C=πc, prove that 2(1-sinB.sinC)=cos2B+cos2C.
19. If A+B=C, prove that cos2A+cos2B+cos2C=1+2cosA.cosB.cosC.
20. If 2(A+B+C)= πc, prove that sin2A+sin2B+sin2C=1-2sinA.sinB.sinC.
21. If A +B +C =2S, prove that sin(S –A).sin(S-B) +sinS.sin(S-C) =sin A.sinB.
A+B B+C
c
22. If A+B+C+D =2π , prove that: sinA +sinB +sinC +sinD =4sin 2 .sin 2 .sin
C+A
2 .
Equations of trigonometry:
Solve the following trigonometrical equations (00-3600).
1. Cos2θ+3sin2θ+sinθ=2.
2. 2 √ 3 sin2θ=cosθ.
3. 2sinθ+3cosθ=3.
4. secθ.tanθ= √3 .
5. Tan2θ-(1+ √3 )tanθ+ √3 =0.
1
6. Cot2θ+
( √ 3+
√3
cot θ= -1.
)
7. Sin2θ+cosθ=1+2sinθ.
8. tanθ+tan2θ+tan3θ=0.
9. cosθ+sinθ=cos2θ+sin2θ.
10. Cosθ+cos2θ+cos3θ=0.
11. √3 sinθ- cosθ= √2 .
√ 3 −1
12. √3 cotx= sin x .
1 3
+ √ =4
13. sin 2θ cos2 θ .
sin θ sin θ
+ =4
14. 1−cos θ 1+cos θ .
15. Cosθ-cos7θ=sin4θ.
16. Sin2A=3tanA.cos2A.
17. Tanθ+tan2θ+ √ 3 tanθ.tan2θ= √ 3 .
18. 3cos2x-1=2sin2x.
19. Tan2x-3secx+3=0.
20. If 2cosx.cosy=1 and tanx+tany=2, find the values of x and y.
1 1
− = √3
21. tan 3 θ−tan 2θ cot3 θ−cot 2θ .
Combined transformation:
1. A triangle with vertices A(1, 2), B(4, -1) and C(2, 5) is reflected successively in the line
x=5 and y=-2. Find by stating co-ordinates and graphically represent the images under
these transformations. State also the single transformation of these transformations.
2. On a graph paper, draw ∆ABC whose vertices are A(3, 2), B(4, 2) and C(3, 4). On the same
graph paper, draw the ∆A’B’C’, the image of ∆ABC by an enlargement with the vertices
A’(6, -1), B’(4, -1) and C’(6, -5). Find its centre of enlargement and the scale factor.
3. R1 denotes an enlargement about the centre (3, 4) and a scale factor of 2 and R 2 denotes a
reflection on the line y=x. ∆PQR with vertices P(-3, 5), Q(7, 4) and R(6, -2) is mapped
onto the∆P1Q1R1 under the transformation R2oR1. Find the co-ordinates of P1, Q1 and R1
and present both images on the graph paper.
4. The vertices of a quadrilateral ABCD are A(2, 3), B(4, 5), C(6, 2) and D(3, 0) respectively.
Find the co-ordinates of final image when the rotation of +80 0 is followed by+1900 about
origin.
5. Find the combination of reflection of ∆ABC with vertices A(1, 2), B(3, 4) and C(4, 1) over
two intersecting axes OY and OX respectively.
6. A rhombus ABCD with vertices A(2, 0), B(3, -3), C(4, 0) and D(3, 3) is translated by the
translation vector AC and then rotated through -2700 about (2, -3). Determine the co-
⃗
ordinates of final image and draw on a graph paper.
7. The vertices of ∆ABC are A(2, 2), B(1, -1) and C(3, 0). If E1=[(0, 2),2] and E2=[(0, -2),
1
−
2 ] then find the final image of ∆ABC when it is enlarged by E2E1 , also find the centre
and scale factor of combined enlargement.
8. The vertices of ∆ABC are A(-2, 2), B(-4, -2) and C(0, -6). Enlarge it by the combined
3
transformation E1oE2 where E1[(2, 3),2] and E2[(2, -2), 2 ]. Also draw both figures on a
graph paper. Find the single transformation equivalent to this combined transformation.
9. Points A(1, 2), B(3, 2) and C(1, 3) are reflected in X-axis then translated by the translation
vector A 'B' . Find the co-ordinates of final image.
⃗
10. A triangle having vertices A(2, 5), B(-1, 3) and C(4, 1) is rotated about origin through
+900. The image so obtained is reflected on the line x =0. Find the vertices of image
triangles. Show all the triangles in the same graph paper and also write the single
transformation to represent these two transformations.
11. Triangle PQR of vertices P(2, 1), Q(4, 2) Y
and R(6, 4) is reflected on the line CD
and then on the line AB. Find the vertices A
of image ∆P’Q’R’ under the combined
transformations if ∠AED =450. Show both
the triangles on the same graph paper. Y=2 E 450
D
C
X’ X
O
B Y’
12. Draw a figure having the vertices A(4, 8), B(6, 6), C(3, 6) and D(4, 4) on the graph. It is
reflected on the line y =4, then draw A’B’C’D’. Then after reflect it on the line y =0 and
draw A”B”C”D” on the same graph paper and find the co-ordinates of A”, B”, C” and D”.
Also find the single transformation to represent this combination of reflections.
13. Rotate ∆OAB where A(3, 0) and B(2, 1) are given , through 90 0 about O and then reflect
the image in the line x =y. Find the final image of ∆OAB and also find the single
transformation which is equivalent to the combination to these transformations.
14. Triangle ABC having vertices A(-2, 2), B(2, 2) and C(2, 8) is translated by the translating
vectors T1 =
(12) and T2 =
(ab ). If the co-ordinates of the final image are A’(1, 5), B’(3,
5) and C’(5, 11) after T1T2, find the translating vector T2.
7. A point A(2, 3) is reflected in the line x =3 and then transformed by the matrix
(30 30 )
.
2 2
Find the inversion point of the image with respect to the circle x +y =75.
8. The inversion points of line segment joining the points P and Q with respect to a circle
with centre R(2, 2) and radius 10 units are P’(6, 4) and Q’(7, 2) respectively. Find the co-
ordinates of P and Q. Show the inversion transformation in the graph.
Matrix Transformation:
1. Triangle PQR whose vertices are P(3, 6), Q(4, 2) and R(2, 2) maps onto the triangle P’Q’R’
with the vertices P’(-6, 3), Q’(-2, 4) and R’(-2, 2). Which is the single transformation for
these mapping? Also find 2×2 transformation matrix.
8. Triangle
(21 6 6
1 5 ) is transformed under the combined transformation
(01 10 )
followed by
(−10 10 ) . Find the final image.
1 2
9. Prove that the matrix
( )
1 1 transformed the unit square into the parallelogram
(00 1 3 2
1 2 1 . )
10. A square PQRS with vertices P(0, 3), Q(1, 1), R(3, 2) and S(2, 4) is mapped onto the
parallelogram P’Q’R’S’ by 2×2 matrix so that the vertices of the parallelogram are P’(3, 0),
Q’(1, -1), R’(2, -3) and S’(4, -2). Find the 2×2 matrix. Which transformation does the
matrix denote?
B C
2. The lines joining the middle points of the sides of a quadrilateral taken in a order is a
parallelogram.
3. Diagonals of a parallelogram bisect to each other.
4. Angle at the circumference in a semi-circle is 900.
5. Diagonals of a rhombus bisect each other at right angle.
6. The middle points of hypotenuse of a right angled triangle are equidistant from its
vertices.
7. Diagonals of a rectangle are equal to each other.
8. The median of an isosceles triangle is perpendicular to the base.
9. The quadrilateral whose diagonals bisect each other is a parallelogram.
10. The position vector of the centroid of a triangle is one third of the sum of the position
vectors of its vertices.
n ⃗a +m ⃗b
⃗p=
11. Prove that m+n where the symbols have their usual meanings.
m ⃗b−n ⃗a
⃗p=
12. Prove that m−n P
from the following figure. n
m
p b B
A
O
A B
14. The line segment passing through the centre of a circle and perpendicular to the chord
bisects the chord.
15. Median of a trapezium is parallel to its bases.
A B
17. ABCD is a parallelogram and G is the point of intersection of its diagonals. If O is any point,
prove that OA+ OB+ OC+ OD=4 OG .
⃗ ⃗ ⃗ ⃗ ⃗
18. In ∆ABC, D, E and F are mid points
of sides BC, CA and AB respectively.
Prove that AD+ ⃗
⃗ BE+⃗
CF=0 .
A
E
F
C
B D
***