Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Omnigrad TST410: RTD Thermometer

    Uploaded by

    TCP.MT.2014 TCP.MT.2014
    This document provides technical specifications for the omnigrad TST410 RTD thermometer. It includes a 3mm platinum probe, mignon terminal head, optional compression fitting, temperature range of -50 to 400°C, and IP67 protection. Installation details are provided such as bending radius, immersion length, and mounting accessories. An order key is included to specify probe length, fitting type, and sensor class.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Omnigrad TST410: RTD Thermometer

    Uploaded by

    TCP.MT.2014 TCP.MT.2014
    22 views4 pages
    This document provides technical specifications for the omnigrad TST410 RTD thermometer. It includes a 3mm platinum probe, mignon terminal head, optional compression fitting, temperature range of -50 to 400°C, and IP67 protection. Installation details are provided such as bending radius, immersion length, and mounting accessories. An order key is included to specify probe length, fitting type, and sensor class.

    Original Title

    TI066TEN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for the omnigrad TST410 RTD thermometer. It includes a 3mm platinum probe, mignon terminal head, optional compression fitting, temperature range of -50 to 400°C, and IP67 protection. Installation details are provided such as bending radius, immersion length, and mounting accessories. An order key is included to specify probe length, fitting type, and sensor class.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views4 pages

    Omnigrad TST410: RTD Thermometer

    Uploaded by

    TCP.MT.2014 TCP.MT.2014
    This document provides technical specifications for the omnigrad TST410 RTD thermometer. It includes a 3mm platinum probe, mignon terminal head, optional compression fitting, temperature range of -50 to 400°C, and IP67 protection. Installation details are provided such as bending radius, immersion length, and mounting accessories. An order key is included to specify probe length, fitting type, and sensor class.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Technical Information

    TI066T/02/en
    RTD Thermometer
    No. 58004732
    omnigrad TST410
    Medium duty - Mignon head
    Ø 3 mm M.I. probe
    requiring compression fitting

    foto

    Description Application
    TST410 RTD thermometer assembly Typical applications for TST410 sensor
    includes a single Pt100 probe in mineral are pressure-less systems such as air
    insulated cable, 3 or 4 wire connections, ducts, flues and pipelines.
    with 3 mm stem diameter, a mignon Special care should be given to the
    terminal head and an optional maximum allowed temperature
    compression fitting. surrounding the terminal head, which
    must be lower than 80°C.
    omnigrad TST410

    Technical data
    Probe Sensing element: Platinum resistance, 1 Pt100 Ω at 0°C, standard version
    Tolerances: class A or class B to IEC 751
    Wiring: 3 or 4 wire connections
    Insulation resistance: ≥ 100 MΩ , test voltage 250 V at ambient temperature
    Electrical connections: terminal block
    Stem: mineral insulated cable (MgO)
    Sheath: AISI 316L/W.1.4404
    Standard diameter: 3 mm
    Operating temperature: -50 ... +400 °C
    Response time values: according to IEC751, in moving water at 0.4 m/s
    T50 = 3 s; T90 = 6 s
    Process connection: optional TA50 threaded compression fitting

    TA20L terminal head Dimension: Mignon type


    Protection grade: IP 67
    Max. temperature: 80°C
    Material: light alloy dye casting with rubber gasket under the cover
    Cable connection: PG9
    Thermowell entry: M10 x 1 mm
    Body colour: blue according to RAL5012 - epoxy coated
    Cap colour: grey according to RAL7015 - epoxy coated
    Weight: 75 g

    Mounting accessories TA50 Threaded


    Compression Fitting: d = 3 mm ; D = G 1/4"
    Sealing ring Teflon: Tmax 200°C; Pmax 10 bar (at 20°C)
    Sealing ring in W.1.4404: Tmax 400°C; Pmax 40 bar (at 20°C)

    Intallation - The allowed bending radius R for mineral insulated cables is ≥ 15 mm for 3 mm diameters
    Bending radius (DIN 43721). The not bendable length is ~30 mm.

    2 Endress+Hauser
    omnigrad TST410

    Order key
    • For a correct temperature TST410- RTD THERMOMETER - Medium duty - Mignon head
    measurement the thermometer Ø 3mm M.I. probe - Requiring separate compression fitting
    immersion length must be 20 times
    the probe diameter in order to Insertion length L (50-5000mm)
    eliminate thermal drift due to A 50 mm insertion length L
    process connection heat
    dissipation. Shorther immersion B 100 mm insertion length L
    length can be supplied but the C 200 mm insertion length L
    thermometer requires an external D 300 mm insertion length L
    (process connection and E 400 mm insertion length L
    connection head) thermal F 500 mm insertion length L
    insulation. X mm insertion length to spec.
    Y mm special insertion length
    Price for 100 mm length L
    55 2 3mm=D inset
    9 To specification
    Installation
    AA Compression fitting not included
    FB Compr. fitting TA50 with SS316 sleeve
    55

    FP Compr. fitting TA50 with PTFE sleeve


    YY To specification
    Class and type of inset
    1B3 1 Pt100 class B, 3 wire
    1B4 1 Pt100 class B, 4 wire
    1A3 1 Pt100 class A, 3 wire
    1A4 1 Pt100 class A, 4 wire
    9Y9 RTD class and type to specification
    L

    TST410- Complete Order Code

    Ø3

    Endress+Hauser 3
    Supplementary • Technical Information TA20 terminal heads (TI 072T/02/en)
    Documentation • Technical Information TA fittings (TI 091T/02/en)

    Endress+Hauser
    Gmbh+Co.
    Instruments International
    P.O. Box 2222
    D-79574 Weil am Rhein
    Germany

    Tel. (07621) 975-02


    Tx 773926
    Fax (07621) 975 345
    http://www.endress.com
    info@ii.endress.com

    TI 066T/02/en/04.01
    FM+SGML 6.0

    You might also like