Valve Type

API Std Summary

Ball,Check, Defines the requirements for the design, manufacturing, assembly, testing, and documentation of ball, check, gate, and plug valves for application in pipeline and piping
API 6D
Gate& Plug systems for the petroleum and natural gas industries. N/A to subsea valves (API 6DSS) also N/A for CL 2500.

Defines the requirements for design, material, F-F, P-T Rating, Inspection, examination & testing for 2 types of check valves. Type-A, short F-F (Table 2) & can be: wafer, lug,
API 594 Check flanged. Single or dual plate CL150(2-48") to 2500(2-12") *For flanges B16.47 Series A. Type -B, bolted cover swing check are long F-F, can be: flanged or BW end CL150-1500 (2-
24"), CL2500 (2-12"). Check Retainerless design for fusitive emission.

Defines the requirements for the design, manufacturing, assembly, testing for Steel plug valves CL 150-2500, flanged or BW (0.5"-24"), theraded (0.5"-2"). Lubricated & Non-
API 599 Plug
Lubricated (only 2-way Plug, Tandem). Patterns:Short (F-F as Gate), Regular, Venturi, Full Round Port

API 600 Gate 1-42", CL150-2500,Flanged,BW:Construction: BB,OS&Y,Rising /non-Rising Stem, Gate type (Solid, flexible, split); Seating type(Metal, parallel / wedge)

API 602 GGC 1/4-4", CL150-1500,Ends: SW-T, FLGD&BW, Constrcution: Standard or Full Bore, Bolted,welded,PS Bonnet; bellow stem, OS-IS, Rising / Non rising
API 603 Gate Corrosion - resistant gate valves for refinery use, 0.5"-24", CL150-600

Defines the requirements for the design, manufacturing, assembly, testing, and documentation of Butterfly valves; Category A: P-T as per Mfg, CL150, 2-48", Concentric
API 609 Butterfly
disc&seat (soft seated). Cat B: ASME P-T rating, Lug/wafer (CL150-600,3-48"); Double Flanged: Long Pattern (CL150-600; 3-36")/ Short Pattern (CL150-600; 3-48")

API 608 Ball Ball valves-flgd /BW (CL150-600), SW / T (CL150-800); Bore: Full, Sigle / Double Reduced; Seat : Non-Metalic / Metalic
ISO17292 Ball Ball valves, Flgd /BW (CL150-600; 1/4"-24"), SW / T (CL150-800; <2"); Bore: Full, Sigle / Double Reduced; Seat : Non-Metalic / Metalic
API 598 All Valve inspection and test
API 607 Fire - resistant testing of ball valves with soft contact faces

ASME B 16.34 All

ASME B 16.10 All F-F

BS 1414 Specification for steel edge gate valves ( flanged and butt- welding ends ) for the petroleum, petrochemical and allied industries
BS 1570 Specification for Flanged and Butt - welding ends steel plug valves for the petroleum industry (excluding well - Head and flow - line valves)
BS 1868 Specification for steel check valves (flanged and butt-welding ends ) for the petroleum, petrochemical and allied industries
BS 1873 Specification for Steel globe and globe stop and check valves (flanged and butt-welding ends ) for the petroleum, petrochemical and allied industries
BS 5351 Steel ball valves for the petroleum petrochemicals and allied industries
 STD»

API 598

ISO-5208

EN-12266-1

API-6D
Summary

Necessary test and optional test are depends on valve type, size & Rating. This standard covers inspection, examination, supplementary examinations, and
types of valves by agreement between the purchaser and the valve manufacturer. Test includes, Shell (H&P), backseat, Closure (low & high),DDB high pre
Refer Table-1, A high-pressure closure test is required for all valves specified to be double block and bleed (DBB) valves, unless specified otherwise by th
If valve size>4" & Rating >600 high pressure closure test is mendatory(L) (optional for floating).Backseat feature may be either a high-pressure or a low-pr
*For SS valves, water contains Cl <50PPM; * Back seat test is required; *High Pressure gas seat test is not included in Table-1; Table-2 for test pressure 1.5 X
Table 5 for max allowable leakage rate compare this with Table 4 of ISO 5208 (simillar to A.5 of EN-12266-1); special requirement for BF

Necessary test and optional test are depends on valve type, size & Rating. Purpose: To verify integrity of the pressure boundary, degree of valve closure tig
Table-1 for type of valves & type of test. Shell test (L) required for all types, for low pressure (<7bar) closure test (G) refer table-1. Requirement for High p
limit on max. duration specified. Table 4 for leakage rate. This standard is similar to EN12266-1. Specific requirements for testing procedure on lubricated
Pressure gas seat test is included in Table-1 but optional.
Leakage rate A= No visible Leakage. D for metal seated valves and G for check valve.

EN-12266-1,Part 1-Mandatory requirements; EN-12266-2,Part 2-Supplementary requirements. Based on ISO 5208. Purpose to establish certain basic require
tests. 5<Fluid temp <400C. Refer table 1

Covers the design, manufacturing, assembly, testing, and documentation of gate, check, ball and plug valves for application in pipeline and piping system
and PT>2500. Check Table T-1 for full bore requirement. In general, the FB valve have opening= DN. For Reducer Bore(4-12") = 1 size reduction & 14">= 2
bonnet or cover parts. The PT rating based on the material group of the valve end connection. Where ends with different material, the lower rating govern
temperatures due to nonmetallic parts. F-F & End to End as er Table C.1-C.5; for non covered sizes follow B16.10. Tolerances on the F-F & end-to-end = ±1.5
If fluid trapping is possible, the valve shall be provided with automatic cavity-pressure relief. Cavity relief testing and functionality may be demonstrated
valves. The maximum force required at the handwheel or wrench to apply the breakaway torque or thrust shall not exceed 360 N. Lever lenght shall be less
Position Indication shall be designed in such a way that it cann't be assembled to falsely indicate the valve position. Selection of elastomeric materials for
address the effect of explosive decompression. If PWHT specified ask for Furnace calibration as per API 6D.
Test pressure-measuring devices shall be accurate to at least ± 2.0 % of full scale. Temperature-measuring devices shall be capable of indicating and record
Hydrostatic Duration is more than other standards. HydroTesting sequence: 1) back seat Test 2) Hydrostatic Shell test 3) Hydrostatic Seat test 4) Cavity Re
Check table 7 for marking and tag plate (acc. to MSS-SP-25). Refer section 12 for shipping and packing. Annex D (informative), guidance for travel stop. A
cavity relief test.
 Valve Standards
Purpose Valve Type API
Isolation Gate API-600-Steel Gate Valves
Isolation Gate 602-Compact Design
Isolation Gate 603-Corrosion Resistant
Isolation Gate 604-DI, FLGD Ends
Isolation BALL API-608
Isolation BALL -
Isolation PLUG API 599
Isolation PLUG API 593
Isolation PISTON -
Isolation DIAPHRAGM -
Isolation DIAPHRAGM -
Isolation BUTTERFLY API-609
Isolation BUTTERFLY
Isolation PINCH VALVE
REGULATING GLOBE API-623
REGULATING GLOBE API-623
REGULATING GLOBE API-623
REGULATING NEEDLE
CHECK LIFT CHECK
CHECK SWING-CHECK API 594
CHECK SWING-CHECK
CHECK SWING-CHECK
SPECIAL KNIFE GATE
SPECIAL EXCESS FLOW VALVE
SPECIAL FLOAT VALVE
SPECIAL UG-STOP VALVE-WATER
SPECIAL FOOT VALVE
SPECIAL FOOT VALVE
SPECIAL DIAPHRAGM TYPE FLOAT

API 598
ASME B16.10
ASME B16.34
MSS-SP-25
MSS-SP-61 PRESSURE TESTING
MSS-SP-80 BRONZE GGC
MSS-SP-92 USER GUIDE
BS 6364 CRYOGENIC VALVE
MSS-SP BS AWWA ISO IS DIN
MSS-SP-42-#150 Corrosion resistant GGC BS 1414 C-500 10434 10611
MSS-SP-70-CI Gate Valves BS 5352 C-509 - 14846
- BS 5151 - - -
- BS 5150 - - -
MSS-SP-72 BS-5153 C-507 - IS 11792
MSS-SP-122-PLASTIC BS 5159 - - IS 9890
MSS-SP-78 BS 5353 - - -
MSS-SP-108 BS 5158 - - -
- - - - DIN 3202
MSS-SP-88 BS 5156 - - IS 11791
- BS 5186 - - -
MSS-SP-67 - C-504 - IS 13095
MSS-SP-68 - - - -
MSS-SP-?
MSS-SP-42-#150 Corrosion resistant GGC BS 1873 IS 10605
MSS-SP-85 BS 5152
BS 5160

MSS-SP-42-#150 Corrosion resistant GGC BS 1868 C-508 IS 5312