G41S Series Motherboard User's Manual

G41S Series
Motherboard
User’s Manual
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modified at any time, Foxconn does not obligate
itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for G41S Series motherboard.
P/N: 3A221D600-000-G
Symbol description:
!
N
IO
UT
Caution : refers to important information that can help you to use motherboard
CA
better, and tells you how to avoid problems.

RN
WA ING
!
Warning : indicating a potential risk of hardware damage or physical injury

may exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
© All rights reserved.

All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical motherboard for specific features.
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product

Motherboard G41S / G41S-K
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology
equipment
■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low
voltage supply systems for equipment with rated current
<= 16A
■ EN 55024/A2:2003 Information technology equipment-Immunity
characteristics limits and methods of measurement
Signature : Place / Date : TAIPEI/2009
Printed Name : James Liang

Declaration of conformity
Trade Name: FOXCONN

Model Name: G41S / G41S-K
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly

Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested to comply with FCC standards.
Signature : Date : 2009

Installation Precautions
NING
AR !
W
■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that flows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■ Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
!
N
IO
UT
Please carefully read the following procedures to install your computer :

CA
■ It is suggested to select high-quality, certified fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
■ We cannot guarantee that your system can operate normally when your
CPU is overclocked. Normal operation depends on the overclocking capac-
ity of your device.
■ If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF
cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect con-
nections might damage the motherboard.
■ When handling the motherboard, avoid touching any metal leads or connec-
tors.
■ If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■ Before turning on the power, please make sure the power supply AC input
voltage setting has been configured to the local standard.
■ To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certified computer technician.
Table of Contents
Chapter 1 Product Introduction

Product Specifications................................................................... 2
Layout............................................................................................ 4
Back Panel Connectors................................................................. 5
Chapter 2 Hardware Install

Install the CPU and CPU Cooler................................................... 8
Install the Memory....................................................................... 11
Install an Expansion Card........................................................... 12
Install other Internal Connectors................................................. 13
Jumpers....................................................................................... 17
Chapter 3 BIOS Setup

Enter BIOS Setup........................................................................ 18
Main Menu................................................................................... 18
System Information..................................................................... 20
Advanced BIOS Features............................................................ 21
FOX Central Control Unit............................................................ 23
Advanced Chipset Features........................................................ 26
Integrated Peripherals................................................................. 29
Power Management Setup.......................................................... 33
PC Health Status......................................................................... 35
BIOS Security Features............................................................... 36
Load Optimal Defaults................................................................ 37
Save and Exit Setup.................................................................... 37
Exit Without Saving..................................................................... 37
Chapter 4 CD Instruction
Utility CD content......................................................................... 39
Install driver and utility................................................................. 40
FOX ONE
Main Page.............................................................................. 42
CPU Control........................................................................... 46
Frequency Control................................................................. 48
Limit Setting........................................................................... 49
Voltage Control...................................................................... 51
Fan Control............................................................................ 52
FOX LiveUpdate
Local Update.......................................................................... 53
Online Update........................................................................ 55
Configure .............................................................................. 58
About & Help.......................................................................... 60
FOX LOGO.................................................................................. 61
FOX DMI..................................................................................... 62
Technical Support :
Support
Website :
http://www.foxconnchannel.com
Support Website :
http://www.foxconnsupport.com
Worldwide online contact Support :

http://www.foxconnchannel.com/support/online.aspx
CPU, Memory, VGA Compatibility Supporting Website :

http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
Thank you for buying Foxconn G41S Series motherboard. Foxconn
products are engineered to maximize computing power, providing
only what you need for break-through performance.
With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, G41S /
G41S-K enables you to unleash more power from your computer.
This chapter includes the following information:

■ Product Specifications
■ Layout
■ Back Panel Connectors
1-1 Product Specifications
CPU upport LGA775 socket Intel® CPU:

S
1
Wolfdale/Conroe/ Conroe-L processors

Support 45nm processors
The CPU TDP not over 65W
Front Side Bus 1333/1066/800MHz FSB
Chipset North Bridge: Intel® G41 Chipset
South Bridge: Intel® ICH7
Memory 1 x 240-pin DDR2 DIMM sockets
Support up to 4GB of system memory
Dual channel DDR2 1066/800/667MHz architecture
Audio Realtek 5.1-channel audio chip
High Definition Audio
2/4/5.1-channel
Support for S/PDIF Out
Support Jack-Sensing function
LAN Realtek 10/100Mb/s LAN chip (G41S)
Realtek Gigabit LAN chip (G41S-K)
Expansion Slots 1 x PCI Express x16 slot
1 x PCI Express x1 slot
Onboard Serial ATA 2 x SATA connectors
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
USB Support hot plug
Support up to 8 x USB 2.0 ports (4 rear panel ports, 2 onboard USB
headers supporting 4 extra ports)
Support USB 2.0 protocol up to 480Mb/s
Internal Connectors 1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x CPU fan header (4-pin)
1 x System fan header (4-pin)
1 x Front panel connector
1 x Front Audio connector
1 x COM1 connector
1 x IR/CIR connector
1 x TPM connector
1 x Speaker connector
1 x S/PDIF_OUT connector
2 x SATA connectors
2 x USB 2.0 connectors (supporting 4 USB devices)
Back Panel 1 x PS/2 keyboard port

Connectors 1 x PS/2 mouse port
1 x VGA port
1 x Coaxial SPDIF_OUT port
1
1 x RJ-45 LAN port
4 x USB 2.0 ports
5.1-channel Audio ports
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating warning
CPU/System fan speed control
PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x16 Support 4GB/s (8 GB/s concurrent) bandwidth
Low power consumption and power management features
Green Function Support ACPI (Advanced Configuration and Power Interface)
Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software FOX ONE
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating System Support for Microsoft® Windows® Vista/XP
Form Factor Micro ITX Form Factor, 7.6 inches x 6.7 inches (19.3cm x 17.0cm)
!
N
IO
UT
CA
This motherboard does not support Windows® 2000.

1-2 Layout
16 17 18 19
1
15
14
13
1
12
11 3
10 9 8 7 6 5
1. CPU Socket 11. North Bridge: Intel® G41 Chipset

2. SYS_FAN Header 12. PCI Express x16 Slot
3. COM1 Connector 13. South Bridge: Intel® ICH7
4. TPM Connector 14. PCI Express x1 Slot
5. IR/CIR Header 15. SATA Connectors
6. DDR2 DIMM Slot 16. Front Audio Connector
7. CPU_FAN Header 17. Front USB Connectors
8. Clear CMOS Jumper 18. 4-pin ATX 12V Power Connector
9. 24-pin ATX Power Connector 19. S/PDIF_OUT Connector
10. Front Panel Connector
Note : The above motherboard layout is for reference only, please refer to the physical mother-
board for detail.

1-3 Back Panel Connectors
PS/2 Mouse Port LAN Port
1 7
1
Coaxial
SPDIF_ OUT Line In
3
Line Out
Microphone
2 4 5 6
PS/2 Keyboard Port VGA Port USB Ports Audio Ports
1. PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse.
2. PS/2 Keyboard Port

Use the lower port (purple) to connect a PS/2 keyboard.
3. Coaxial SPDIF_OUT Connector

This connector provides digital audio out to an external audio system that suports digital coaxial
audio. Before using this feature , enture that your audio system provides a coaxial digital audio
in connector.
4. VGA Port
To connect with external display devices, such as monitor or LCD display.
5. USB Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
6. Audio Ports
For the definition of each audio port, please refer to the table below :
Port 2-channel 4-channel 5.1-channel

Blue Line In Rear Speaker Out* Rear Speaker Out*
Green Line Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Center/Subwoofer Out*
* : Please refer to Chapter 4, and run the Realtek audio driver (in CD) to assign the audio output
ports for different applications of 2/4/5.1 channels. The fundamental audio outputs are depicted
in the table above.

7. RJ-45 LAN Port
The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.
1
Left: Active Right: Link

LAN Type
Status Description Status Description
Off No Link Off No Link
100M Green
Data Activity Orange 10/100Mb/s Connection
Blinking
Off No Link Off No Link
Off 10Mb/s Connection
1000M Green
Data Activity Green 100Mb/s Connection
Blinking
Orange 1000Mb/s Connection
Active Link
LED LED
N
!
IO
UT
CA
G41S supports 10/100Mb/s Ethernet.

G41S-K supports 1Gb/s Ethernet.

This chapter introduces the hardware installation process, including
the installation of the CPU, memory, power supply, slots, pin headers
and the mounting of jumpers. Caution should be exercised during
the installation of these modules. Please refer to the motherboard
layout prior to any installation and read the contents in this chapter
carefully.
This chapter includes the following information :

■ Install the CPU and CPU Cooler
■ Install the Memory
■ Install an Expansion Card
■ Install other Internal Connectors
■ Jumpers
This motherboard support CPUs with a power rating no more than 65W, which
include Wolfdale/Conroe/ Conroe-L processors and 45nm CPUs.
For further information, please refer to website below for CPU Support List. We
cannot guarantee that your system can operate normally if you use a CPU not
included in the CPU
Support List.
Please visit this website for more supporting information about CPU, Memory and
VGA for your motherboard :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
2-1 Install the CPU and CPU Cooler
!
N
IO
UT
CA
Read the following guidelines before you begin to install the CPU :
■ Make sure that the motherboard supports the CPU.
■ Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
2
■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or
you may locate the notches on both sides of the CPU and alignment keys on the CPU
socket.)
■ Apply an even and thin layer of thermal grease on the surface of the CPU.
■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
■ Set the CPU host frequency in accordance with the CPU specifications. It is not
recommended that the system bus frequency be set beyond hardware specifications
since it does not meet the standard requirements for the peripherals. If you wish to
set the frequency beyond the standard specifications, please do so according to your
hardware specifications including the CPU, graphics card, memory, hard drive, etc.
Hyper-Threading Technology System Requirements:

(Go to Intel's website for more information about the Hyper-Threading Technology)
■ An Intel® CPU that supports HT Technology
■ A chipset that supports HT Technology
■ An operating system that is optimized for HT Technology
■ A BIOS that supports HT Technology and has it enabled
Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA775 CPU Socket
Alignment Keyy
Pin-1 Corner of the CPU

Socket
LGA775 CPU
Notch
Pin-1 triangle marking
of CPU

Follow the steps to install the CPU onto the CPU socket :
!
N
IO
UT
CA
Before installing the CPU, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the CPU.
2
1. Remove protective socket cover. 2. Release the CPU socket lever.
3. Lift the metal cover on the CPU 4. Check Pin-1 marking (triangle) with
socket. the Pin-1 corner of the CPU socket,
align the CPU notches with the socket
alignment keys and gently put the
CPU onto the socket.
5. When CPU is properly seated,

replace the metal cover and push the
CPU socket lever back to its locked
position.

Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard. (The following
procedures use Foxconn cooler as the example.)
2
2. Place the four bolts of the CPU

1. Apply and spread an even thermal
cooler to the holes of the motherboard,
grease on the surface of CPU.
push them straight down from the top,
and the bolts will be fastened on the
motherboard. That's it.
3. Check the solder side of the 4. Attach the 4-wire CPU cooler
motherboard, the push pin should be connector to the CPU FAN header
fixed as depicted in the picture. on the motherboard .
Release bolts of CPU cooler from

3 motherboard :
1.Turning the push pin (bolt)
2 along with the direction of arrow
(counterclockwise).
1
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
!
N
IO
UT
CA
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
10
2-2 Install a Memory
N
!
IO
UT
CA
Read the following guidelines before you begin to install the memory :
■ Make sure that the motherboard supports the memory.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
2
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
■ Be sure to install DDR2 DIMM on this motherboard.
112-Pin
Notch
128-Pin
If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated
by a notch in the middle, so it can only fit in one direction. Follow the steps below to correctly install
your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory socket.
Place the memory module onto the socket, then put your
fingers on top edge of the module, and push it down firmly
and seat it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place
when the memory module is securely inserted.
11
2-3 Install an Expansion Card
N
!
IO
UT
CA
■ Make sure the motherboard supports the expansion card. Carefully read the manual
that came with your expansion card.
■ Always turn off the computer and unplug the power cord from the power outlet before
2
installing an expansion card to prevent hardware damage.
PCI Express x1
PCI Express x16
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis
back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover.
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Installing and Removing a PCI Express x16 Graphics Card :
• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.
Make sure the graphics card is locked by the latch at the end of
the PCI Express x16 slot.
• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.
12
2-4 Install other Internal Connectors
Power Connectors
This motherboard uses an ATX power supply. In order not to damage any device, make sure all the
devices have been installed properly before applying the power supply.
2
24-pin ATX power connector : PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the
connector and make sure it is secure.
Pin # Definition Pin # Definition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON(Soft On/Off)
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 NC
9 +5V SB(Stand by +5V) 21 +5V
10 +12V 22 +5V
24 13
11 +12V 23 +5V
12 3.3V 24 GND
12 1
PWR1
Pin No. 24
N
!
IO
UT
CA
We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need
to align the ATX power connector according to
the picture.
20-Pin Power
4-pin ATX 12 V Power Connector : PWR2

Connect the 4-pin ATX 12V power supply to PWR2 and provides power to the CPU.
3 1
Pin # Definition
1 GND
2 GND
+12V GND
3 +12V
4 2 4 +12V
PWR2
13
Serial ATA Connectors : SATA_1/2
The Serial ATA connector is used to connect with SATA Hard 1
GND
Disk or CD devices which support this feature. The current TX+
TX-
Serial ATA II interface allows up to 300MB/s data transfer
GND
rate. RX-
RX+
GND
Front Panel Connector : FP1

2
This motherboard includes one connector for connecting the SATA_1/2

front panel switch and LED Indicators.
Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It
indicates the active status of the hard disks. This 2-pin
connector is directional with +/- sign.
Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the switch
is pressed.
Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of
the chassis. The Power LED indicates the system’s status.
When the system is in operation (S0 status), the LED is
on. When the system gets into sleep mode (S1) , the LED 1 2
is blinking; When the system is in S3/S4 sleep state or HDD-LED + +
PWR-LED
power off mode (S5), the LED is off. This 2-pin connector - -
is directional with +/- sign. RESET-SW PWR-SW

NC EMPTY
9 10
Power Switch Connector (PWR-SW)
Connect to the power button on the front panel of the FP1
chassis. Push this switch allows the system to be turned
1 2
on and off rather than using the power supply button. +5V +5VSB
EMPTY CIRRX
IRRX CIRTX
GND GND
IR/CIR Connector : IR/CIR IRTX EMPTY
This header supports infrared wireless transmitting and 9 10
receiving device. IR/CIR
1 2
COM Connector : COM1 RLSD SIN
SOUT DTR
This motherboard supports one serial RS232 COM port for
GND DSR
legacy compatibility. User must purchase another RS232 cable RTS CTS
with a 9-pin D-sub connector at one end to connect with the RI EMPTY
9 10
external RS232 device and another end with 10-pin female con-
nector to connect with COM1 connector in the motherboard. COM1
14
Audio Connector : F_AUDIO 1 2
The audio connector supports HD Audio standard. PORT1_L AUD_GND
PORT1_R PRESENCE_J
It provides the Front Audio output choice. PORT2_R SENSE1_RETURN
SENSE_SEND EMPTY
PORT2_L SENSE2_RETURN
9 10
F_AUDIO
S/PDIF OUT Connector : SPDIF_OUT
2
The connector is used for S/PDIF output.
+5V 1
EMPTY 2
SPDIF_OUT 3
GND 4
Fan Connectors : CPU_FAN/SYS_FAN
SPDIF_OUT
There are two main fan headers on this motherboard.
The fan speed can be controlled and monitored in “PC
Health Status” section of the BIOS Setup. These fans
can be automatically turned off after the system Enters
S3, S4 and S5 sleeping states.
1 2
VCC VCC
D- D-
D+ D+
GND GND
EMPTY NC
9 10
F_USB 1/2
USB Connectors : F_USB1/2

In addition to the four USB ports on the rear panel, this 1 GND
POWER
product also provides two 10-pin USB headers on its SENSE
motherboard. By connecting through USB cables with CONTROL
them, user can quickly expand another four USB ports SYS_FAN/CPU_FAN
on the front panel.
1 2
LCLK GND
LFRAMEn EMPTY
LRESETn NC_3
LAD3 LAD2
TPM Connector : TPM VDD LAD1
LAD0 GND
The TPM (Trusted Platform Module) provides the ability
NC_1 NC_4
to the PC to run applications more secure and to make NC_2 SERIRQ
transactions and communication more trustworthy. To GND CLKRUNin
utilize this function, you should purchase additional LPCPDn NC_5
19 20
device and install it.
TPM
15
2-5 Jumpers
For some features needed, users can change the jumper settings on this motherboard to modify them.
This section explains how to use the various functions of this motherboard by changing the jumper
settings. Users should read the following content carefully prior to modifying any jumper setting.
Description of Jumpers
2
1. For any jumper on this motherboard, pin 1 can be identified by the bold silkscreen next to it.
However, in this manual, pin 1 is simply labeled as “1”.
2. The following table explains different types of the jumper settings. "Closed" means placing a jumper
cap on the two pins to temporarily short them. The shorting can also be done by touching two
pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent
hazardous ESD (Electrical Static Discharge) problem.
Jumper Diagram Definition Description

1 1-2 Set Pin 1 and Pin 2 closed
1
1 2-3 Set Pin 2 and Pin 3 closed
Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to
factory default when the BIOS settings were mistakenly modified.
The steps to clear CMOS data are :
1. Turn off the computer, unplug the power cord from the power outlet.
2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS
data.
3. Return the setting to its original with pins 2-3 closed.
4. Plug in the power cord to your computer and turn it on.
5. Go to BIOS Setup to configure new system as described in next chapter.
1
Clear 2
3
1
Normal
2
(Default) 3
AR
NING
!
CLR_CMOS
W
■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.
16
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are
also provided.
You have to run the Setup Program when the following cases oc-
cur:
1. An error message appears on the screen during the system
Power-On Self-Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :

■ Enter BIOS Setup
■ Main Menu
■ System Information
■ Advanced BIOS Features
■ Fox Central Control Unit
■ Advanced Chipset Features
■ Integrated Peripherals
■ Power Management Setup
■ PC Health Status
■ BIOS Security Features
■ Load Optimal Defaults
■ Save & Exit Setup
■ Exit Without Saving
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <Del> to enter Setup, <Esc> to boot menu" appears at the bottom
of the screen, you can press <DEL> key to enter Setup.
N
!
IO
UT
CA
We do not suggest that you change the default values in the BIOS Setup, and we
shall not be responsible for any damage which resulted from the change you made.
3
Main Menu
The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the sub-menu.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Information
► System Information ► PC Health Status
► Advanced BIOS Features ► BIOS Security Features
► Fox Central Control Unit Load Optimal Defaults
► Advanced Chipset Features Save & Exit Setup
► Integrated Peripherals Exit Without Saving
► Power Management Setup
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults
Configure Time and Date. Display System Information...

v02.63 (c) Copyright 1985-2008, American Megatrends, Inc.
Each item in the main menu is explained below:

► System Information
It displays the basic system configuration, such as BIOS version, CPU Name, memory size
plus system date, time. They all can be viewed or set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu. There are boot up settings.
► Fox Central Control Unit
Some special proprietary features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance
can be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are Super I/O devices such as
18
Serial I/O and other USB devices... etc.
► Power Management Setup
All the items related with Green function features can be setup through this menu.
► PC Health Status
This setup enables you to read/change fan speeds, and displays temperatures and voltages of
your CPU/System.
► BIOS Security Features
The Supervisor/User password can be set up through this menu to prevent unauthorized use
of your computer. If you set a password, the system will ask you to key in correct password
before boot or access to Setup.
3
► Load Optimal Defaults
The optimal performance settings can be loaded through this menu. However, it may offer bet-
ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause
problem if you have more memory or I/O cards installed. It means, if your system loading is
heavy, set to optimal default may sometimes come out an unstable system. What you need
now is to adjust BIOS setting one by one, trial and error, to find out the best setting for your
current system.
► Save & Exit Setup
Save setting values to CMOS and exit.
► Exit Without Saving
Do not change anything and exit the setup.
19
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time and so
on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the
setting.
System Information
System Time [17

17 : 33 : 49] Help Item
System Date [Sun, 12/21/2008]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
► SATA Channel 1 Master [Not Detected] select a field.
► SATA Channel 2 Master [Not Detected]
3
Use [+] or [-] to

Halt On [All Errors But ...] configure system time.
Keyboard [Disabled]
Mouse [Disabled]
Model Name :G41S / G41S-K

BIOS Version :P01
Memory :512MB
MAC Address :00-E0-4C-36-00-09
Intel (R) Pentium (R) Dual CPU E2220 @ 2.40GHz

► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► SATA Channel 1/2 Master
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
tion can be enabled/disabled in the next two settings.
► Keyboard
The system boot will not stop for a keyboard error if you enabled this item.
20
► Mouse
The system boot will not stop for a mouse error if you enabled this item.
► Model Name
Model name of this product.
► BIOS Version
It displays the current BIOS version. User can check this information and discuss with the field
service people if a BIOS upgrade is needed.
► Memory
This item displays the current memory size. The size is depending on how many memory mod-
ules were installed in your system before powering on.
3
► MAC Address
This item shows the onboard LAN MAC address.
► Intel (R) Pentium (R) Dual CPU
This item shows processor type.
Advanced BIOS Features

Advanced BIOS Features
PCI Latency Timer [64]

[64] Help Item
Quiet Boot [Enabled]
Quick Boot [Enabled] Value in units of PCI
Bootup Num-Lock [On] clocks for PCI device
► Trusted Computing [Press Enter] latency timer
register .

► PCI Latency Timer

This item is used to set the PCI latency timer. The value is in unit of PCI cycle for PCI device
latency timer register. Setting values are 32, 64, 96, 128, 160, 192, 224, 248.
This feature controls how long each PCI device can hold the bus before another takes over.
The larger the value, the longer the PCI device can retain control of the bus. Low values for
the PCI Latency Timer will reduce the effective PCI bandwidth while higher values means
every PCI device will have to wait longer before they can get access to the bus, but when they
do get access, they can conduct their transactions for a longer time. Normally, a default value
of 64 cycles is set. Some PCI devices may not agree with longer latency times so if you start
facing problems like stuttering sound or a less responsive system, reduce the latency. Higher
values will actually reduce performance as too much time may be allocated to each PCI device
21
to the disadvantage of other devices on the bus.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Quick Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The
3
available settings are: On (default) and Off.

► Trusted Computing
Press <Enter> to go to its submenu.
Trusted Computing
Trusted Computing Help Item

TCG/TPM Support [No] Enable / Disable TPM
[No]
TCG (TPM 1.1/1.2)
support in BIOS


TCG/TPM Support
Trusted Computing Group (TCG) members develop and promote open, vendor-neutral,
industry standard specifications for trusted computing building blocks and software interfaces
across multiple platforms
TPM (Trusted Platform Module) is a specification promoted by TCG. A Trusted Platform Mod-
ule offers facilities for secure generation of cryptographic keys.
The TPM Work Group is chartered to create the Trusted Platform Module (TPM) specifica-
tion. The definition of the TPM architecture comes from the TC and the TPM Work Group
defines the implementation of that architecture. Work group members should have a working
knowledge of security in relation to the design and usage of cryptographic modules. Members
should also have a working knowledge of cryptographic techniques including public-key cryp-
tography, cryptographic algorithms and protocols.
This item is used to enable/disable the function of TCG/TPM support.
22
Fox Central Control Unit
Fox Central Control Unit
► Smart BIOS Enter]

[Press Enter] Help Item
► CPU Configuration [Press Enter]
► Voltage Options [Press Enter]
Spread Spectrum [Enabled]
BIOS Write Protection [Enabled]
3
► Smart BIOS / CPU Configuration / Voltage Options

► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation.
► BIOS Write Protection
To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism
provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g.
CIH.
23
Smart BIOS
Smart BIOS
Smart Power LED [Enabled]

[Enabled] Help Item
Smart Boot Menu [Enabled]
Current CPU Speed : 1.40GHz Options
Current FSB Speed : 800MHz
Current CPU Multiplier : 7 Disabled
Current DRAM Speed : 667MHz Enabled
3

► Smart Power LED

Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK
No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK
Quick blinking twice (1/3sec. On, 1/3sec. Off),

Post Error Message Enter Setup or Skip
one long On (1sec.), continuously.
No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK
► Smart Boot Menu

When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB Speed
This item displays the current Front Side Bus clock.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM Speed.
24
CPU Configuration
CPU Configuration
CPU Configuration Help Item

Module Version : 3F.0F
This should be enabled
Manufacturer : Intel in order to enable or
Intel (R) Pentium (R) Dual CPU E2220 @ 2.40GHz disable the “Enhanced
Frequency :1.40GHz Halt State”.
FSB Speed :800MHz
Cache L1 :64KB
Cache L2 :1024KB
Ratio Status :Unlocked (Min:06, Max:12)
Ratio Actual Value: 7
3

C1E Support [Enabled]
Limit CPUID MaxVal [Disabled]
Execute Disable Bit [Enabled]
EIST Function [Enabled]

► C1E Support
C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power
consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
► Limit CPUID MaxVal
This item is used to enable or disable CPUID maximum value limit configuration. Set Limit
CPUID MaxVal to 3, it should be [Disabled] for WinXP.
► Execute Disable Bit
This item is used to enable/disable the Execute Disable Bit feature.
Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer
overflow attacks when combined with a supporting operating system.
Execute Disable Bit allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert code in the
buffer, the processor disables code execution, preventing damage and worm propagation.
Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks,
reducing the need for virus-related repairs. By combining Execute Disable Bit with anti-virus,
firewall, spyware removal, e-mail filtering software, and other network security measures, IT
managers can free IT resources for other initiatives.
► EIST Function
You can enable/disable the EIST (Processor Power Management, PPM) through this item.
N
!
IO
UT
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically

CA
adjust processor voltage and core frequency, which can result in decreased aver-
age power consumption and decreased average heat production. There are some
system requirements must be met, including CPU, chipset, motherboard, BIOS and
operation system. Please refer to Intel website for more information.
25
Voltage Options
Voltage Options
Voltage Options Help Item

[Default]
DRAM Voltage Control [Default] Options

Default
+0.1V
+0.2V
+0.3V

► DRAM Voltage Control

This option is used to disable or change the DRAM voltage.
Advanced Chipset Features

Advanced Chipset Features
► Video Function Configure Enter]

Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3328MB
DRAM Frequency [Auto]
Memory Timing by SPD [Enabled]
Memory Hole [Disabled]

Initial Graphics Adapter [IGD]
IGD Graphics Mode Select [Enabled, 32MB]
IGD GTT Graphic smemory size [No VT mode, 2MB]
PEG Port [Auto]

► Video Function Configure

► Memory Remap Feature
This item is used to enable/disable memory remap feature. Its mainly for if you have a 64bit
26
OS and 4gb of RAM. Basically it allows you to remap the overlapped PCI memory above the
total physical memory.
► DRAM Frequency
This item is used to adjust the DRAM frequency. Select [Auto] for SPD enable mode. You also
can select a value manually such as [667 MHz] or [800 MHz].
► Memory Timing by SPD
This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It
contains important information about the module's speed, size, addressing mode and various
other parameters, so that the motherboard memory controller (chipset) can better access the
3
memory device.
► Memory Hole
This item is used to determine whether the 15M-16M address field of memory is reserved for
the ISA expansion card.
► Initial Graphics Adapter
This item is used to choose the initial graphics controller which will be used as the primary
boot device.
► IGD Graphics Mode Select
This item is used to select the amount of system memory used by internal graphics device.
► PEG Port
This item is used to enable/disable PCI Express graphics port.
27
Video Function Configure
Video Function Configure
Video Function Configure Help Item

DVMT Mode Select [DVMT Mode]
Mode] Options
DVMT/FIXED Memory [256MB]
DVMT Mode

3

► DVMT Mode Select

Dynamic Video Memory Technology (DVMT) dynamically allocates system memory for use
as video memory to ensure the most efficient use of available resources for maximum 2D/3D
graphics performance.
The amount of video memory allocated depends upon the amount requested by the operating
system. When the memory is no longer required, it is returned to the operating system for use by
other applications or system functions. DVMT allocates memory based on system needs. This
BIOS option allows you to adjust the amount of memory available for DVMT.
Fixed is a memory allocation method addition to the Unified Memory Architecture (UMA) concept,
wherein a static amount of page-locked graphics memory is allocated during driver initialization.
This fixed amount of memory will provide the user with a guaranteed graphics memory at all
times, and will no longer be available to the OS.
DVMT is an enhancement of the UMA concept, where in the graphics driver allocates memory
as needed for running graphics applications. If a user is not performing any graphics-intensive
operations, most of the DVMT memory can be utilized by the OS for other uses. We recommend
using DVMT setting for better overall system performance.
► DVMT/FIXED Memory
Select graphics memory size for Fixed or DVMT usage.
28
Integrated Peripherals
Integrated Peripherals
► IDE Configuration Enter]

► OnBoard Configuration [Press Enter]
► SuperIO Configuration [Press Enter] Configure the IDE
► USB Configuration [Press Enter] device(s) .

3
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration

Press <Enter> to go to relative submenu.
IDE Configuration
IDE Configuration
IDE Configuration Help Item

SATA Controller [Enhanced]
[Enhanced] Options

Disabled
Compatible
Enhanced

► SATA Controller
This item allows you to select the mode of the SATA ports. Setting values are: [Disabled],
[Compatible], [Enhanced].
29
OnBoard Configuration
OnBoard Configuration
OnBoard Configuration Help Item

OnBoard Audio Controller [Enabled] Options
OnBoard LAN Controller [Enabled]
OnBoard LAN Boot ROM [Disabled] Enabled
Disabled

3

► OnBoard Audio Controller

This item is used to enable or disable the onboard Audio Controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
30
SuperIO Configuration
SuperIO Configuration
SuperIO Configuration Help Item

Serial Port1 Address [3F8/IRQ4]
[3F8/IRQ4] Allows BIOS to Select
Serial Port1 Mode [Normal] Serial Port1 Base
OnBoard IrDA Port [2F8/IRQ3] Addresses .
IrDA Duplex Mode [Half Duplex]
OnBoard CIR Port [Disabled]


► Serial Port1 Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Serial Port1 Mode
This item enables you to determine the transfer mode of the serial port 1.
► OnBoard IrDA Port
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard IrDA
port.
► IrDA Duplex Mode
This item enables you to determine the infrared function of the onboard infrared chip.
► OnBoard CIR Port
This item is used to disable or assign the I/O address for onboard infrared chip.
31
USB Configuration
USB Configuration
USB Configuration Help Item

Module Version - 2.24.3-13.4 Enables support for
legacy USB. AUTO
USB Devices Enabled : option disables
None legacy support if
no USB devices are
Legacy USB Support [Enabled]
[Enabled] connected.
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]

3

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 1.1 Controller
This item is used to enable or disable the Universal Host Controller Interface for USB.
► USB 2.0 Controller
This item is used to enable or disable the Enhanced Host Controller Interface for USB.
If USB devices are connected to the computer, the following item will appear :
► USB Storage Configuration
After pressing <Enter>, you can set the reset delay for the USB storage device. There are
many different emulation types of this USB device, such as floppy, hard disk and CDROM can
be selected.
32
Power Management Setup
Power Management Setup
ACPI Suspend Type [S3 (STR)]

(STR)] Help Item
Power On after Power Fail [Power Off]
HPET [Enabled] Select the ACPI
Resume by Ring [Enabled] state used for
Resume by LAN [Enabled] System Suspend .
Resume by PCIE PME [Enabled]
Resume by USB Devices [Enabled]
Resume by PS2 Keyboard [Enabled]
Resume by PS2 Mouse [Enabled]
Resume by RTC [Disabled]
3
↑↓→←:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
ACPI (Advanced Configuration and Power Interface) is an open industry standard interfaces
enabling OS-directed configuration, power management, and thermal management of mobile,
desktop, and server platforms. It defines five sleeping states, they are :
S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system
context is lost (CPU or chip set) and hardware maintains all system context. (also called
Power On Suspend)
S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1
sleeping state except that the CPU and system cache context is lost (the OS is respon-
sible for maintaining the caches and CPU context). Control starts from the processor’s
reset vector after the wake event.
S3 - The S3 sleeping state is a low wake latency sleeping state where all system context is lost
except system memory. CPU, cache, and chip set context are lost in this state. Hardware
maintains memory context and restores some CPU and L2 configuration context. Control
starts from the processor’s reset vector after the wake event. (also called Suspend to
RAM)
S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported
by ACPI. In order to reduce power to a minimum, it is assumed that the hardware platform
has powered off all devices. Platform context is maintained. (also called Suspend to
Disk)
S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The
system is in the “soft” off state and requires a complete boot when it wakes. Software
uses a different state value to distinguish between the S5 state and the S4 state to allow
for initial boot operations within the BIOS to distinguish whether or not the boot is going to
wake from a saved memory image.
33
► ACPI Suspend Type
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
► Power On after Power Fail
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
► HPET
3
HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows
does not have access to it and therefore falls back to less accurate timing methods. This item
is used to enable or disable the HPET Support.
► Resume by Ring
This item is used to enable/disable the modem of serial port to generate a wake up from an
ACPI sleep state.
► Resume by LAN
This item is used to enable/disable the LAN device to generate a wake up.
► Resume by PCIE PME
This item is used to enable/disable a PCI Express device to generate a wake up.
► Resume by USB Devices
This item is used to enable/disable the USB keyboard or mouse to generate a wake up.
► Resume by PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume by PS2 Mouse
This item is used to enable/disable the PS2 mouse to generate a wake up.
► Resume by RTC
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
34
PC Health Status
PC Health Status
Help Item
Warning Temperature [Disabled]
Shutdown Temperature [Disabled] Options
CPU Temperature :40oC/104 oF
System Temperature :31 oC/87 oF Disabled
50 oC/122oF
CPU Fan Speed :3552 RPM 55 oC/131 oF
System Fan Speed :N/A 60 oC/140 oF
65 oC/149 oF
CPU Core :1.280 V 70 oC/158 oF
DRAM Voltage :1.920 V 75 oC/167 oF
3
+3.30V :3.408 V 80 oC/176 oF
+5.00V :5.080 V 85 oC/185 oF
+12.0V :11.968 V 90 oC/194 oF
System Smart Fan Control [Disabled]
CPU Smart Fan Control [Disabled]

► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan Speed
The CPU fan/System fan/Chipset fan speed are automatically detected and displayed by the
system.
► CPU Core/DRAM Voltage/+ 3.30V/+5.00V/+12.0V
The current voltages are automatically detected and displayed by the system.
► System/CPU Smart Fan Control
This option is used to enable or disable smart fan function.
35
BIOS Security Features
BIOS Security Features
Supervisor Password : Not Installed Help Item

User Password : Not Installed
Install or change the
Enter] password.
Change Supervisor Password [Press Enter]
Change User Password [Press Enter]

3

► Change Supervisor Password

This item is used to install or change supervisor password. Enter New Password :
After you input Supervisor password, it then will ask you to input
user password optionally.
► Change User Password
This item is used to install or change user password. Enter New Password :
36
Load Optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS Load Optimal Defaults?
values.
Select this option and press Enter, it will pop out a dialogue box to let [OK] [Cancel]
you load the defaults. Select <OK> and then press <Enter> to load the
defaults. Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set
cannot be supported by your hardware devices (for example, too many expansion cards were
3
installed), the system might fail to work.
Save & Exit Setup

When you select this option and press <Enter>, a message
will be displayed in the center of the screen: Save configuration changes and exit setup?
Select [OK] to save your changes to CMOS and exit the
program, select [Cancel] or <ESC> to return to the main [OK] [Cancel]
menu.
Exit Without Saving

If you select this option and press <Enter>, the following message
will be displayed in the center of the screen: Discard changes and exit setup?
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu. [OK] [Cancel]
37
The utility CD that came with the motherboard contains useful software
and several utility drivers that enhance the motherboard features.
This chapter includes the following information:

■ Utility CD content
■ Install driver and utility
■ FOX ONE
■ FOX LiveUpdate
■ FOX LOGO
■ FOX DMI
Note : Because each module is independent, so the section number

will be reorganized and unique to each module, please understand.
Utility CD content
This motherboard comes with one CD. You can simply put it into your CD/DVD-ROM drive, and the
main menu will be displayed on your PC screen to guide you how to install.
1. Install Driver
Use these options to install all the drivers for your system. You should install the drivers in order,
and you need to restart your computer after all the drivers have been installed.
A. Intel Chipset Driver

B. Realtek HDA Audio Driver
C. Realtek 811X LAN Driver
D. Intel VGA Driver
4
2. Software Utilities
Use these options to install additional software programs. FOX ONE is a very powerful user
interface program which allows you to change your system setting without going to BIOS. Some
auto features help user to improve (or overclock) your system without being a computer literate.
A. FOX ONE
B. FOX LiveUpdate
C. FOX LOGO
D. FOX DMI
E. Microsoft DirectX 9.0
F. Adobe Acrobat Reader
G. Norton Internet Security
39
Install driver and utility
1. Install Driver
You must click "Intel Chipset Driver" to install it first. After that, you can click ”One Click Setup” to
install all the other drivers left, or you can click on each individual driver to install it manually.
Manual
Installation Step
by Step
Automatic
4
Installation by
One Click.
Exit the
program
Click to visit Select Select Browse Drop to

Foxconn's to Install to Install CD System
website Utilities Drivers Tray
2. Install Utility
You can select the specific utility to install.
40
FOX ONE
FOX ONE is a powerful utility for easily modifying system settings. It also allows users
to monitor various temperature values, voltage values, frequencies and fan speeds at
any time.
With FOX ONE, you can :

■ Modify system performance settings, such as the CPU and memory bus speeds,
CPU voltages, fan speeds, and other system performance options.
■ Monitor hardware temperatures, voltages, frequencies and fan speeds.
N
!
IO
UT
Depending on hardware support, voltage monitoring and Fox Intelligent Stepping

CA
4
features are optional and only supported in some models. If the option is selectable, it
also means the feature is supported.
■ Voltage Monitoring is supported only in FOX ONE Premium & Deluxe products.
■ Fox Intelligent Stepping is supported only in FOX ONE Deluxe products.
Supporting Operating Systems :

■ Windows 2000 ■ Windows XP (32-bit and 64-bit)
■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit)
Using FOX ONE :

The very first time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent
Stepping) will require you to calibrate the CPU’s loading. Click “OK” to proceed
and start the Utility. F.I.S. is a feature of FOX ONE, which can automatically adjust your
CPU clock based on your current system loading.
N
!
IO
UT
Before you running the FOX ONE program, the system parameters (such as CPU
CA
clock, voltage...etc.) are controlled by BIOS settings. After you run FOX ONE, it will
take over, and the controlling right will be transferred to FOX ONE. Later, if you exit
FOX ONE, then BIOS control will be back again.
41
1. Main Page
Show CPU
Information Toolbar Alert Lamp
Switch Button
Skin Button
Exit
Minimum
4
Configuration
Homepage
Monitor Frequency/Voltage/Fan
speed/Temperature value
Toolbar
Use the toolbar to navigate to other pages.
Alert Lamp
When the system is in healthy state, the color of alert lamp is green. When the system
is in abnormal state, the alert lamp color is red.
Switch Button
Click this button, it will simplify the whole FOX ONE control panel to a smaller
information bar (i.e. Simple Mode) as depicted below, you can drag this bar to any
place on your screen to help you monitoring system status.
Skin Button
Exit FOX ONE
Click here to go back to
FOX ONE full screen
Click here will drop the FOX ONE to Windows system tray
42
There are more choices of FOX ONE screen panels. Click this button, you can select
your favorite skin (FOX ONE Panel).
Exit
Click the new skin

picture to select
the new skin
4
Apply the changes Cancel the changes
Click this button to exit the program.
Minimum
Click this button to drop the FOX ONE to Windows system tray located at the lower
right corner of your screen.
Homepage
Click this button to visit Foxconn motherboard website :

http://www.foxconnchannel.com
43
Configuration
This menu allows you to configure :
1). Monitor interval (ms) :
This is to define the interval of different messages of system settings which are to be
displayed on Simple Mode screen. Minimum value is 1 second.
4
2). Simple Mode :

To select which message of system settings are to be displayed in the Simple Mode.
Messages such as CPU frequency, voltage...etc., they can be displayed one by one in
Simple Mode.
3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)

This function will re-calibrate the CPU's loading, and it may take several minutes to
proceed. The FOX ONE calibration process will apply different loadings to your CPU,
record PWM IC voltage together with the CPU clock running at these loadings, so it
can define and estimate within a particular range of system loading, what the CPU
clock should be.
44
Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.
4
Step 2 : After data is collected, it will ask you to restart your computer now.
Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU
Page) is also enabled, FOX ONE will automatically adjust your CPU clock
according to your system loadings. (Loadings are like Power Gaming, Data
Mining...etc.)
45
Manual :
2. CPU Page - CPU Control
This page lets you select (or overclock) CPU clock to meet the current performance
level of the system. The fastest and suitable CPU clock running for current system can
be calculated by FOX ONE automatically or manually input by yourselves.
You can press the up/down button to adjust your CPU clock.
Auto :
Click this button to let FOX ONE check the highest CPU clock you can use. System will
raise the CPU clock step by step until it hangs, you can then push the RESET button
on your PC panel to restart the system. When system restarts, run FOX ONE again, it
will display a recommended highest CPU clock for you, click <Yes> to apply it.
4
Go to CPU page Adjust by manual
Press Auto button to let FOX

ONE check the highest CPU
clock you can use.
Reset the FIS Features : Apply the

changes Select the different changes
benchmarks
A message informs you to

push RESET button later if
the system hangs finally.
Click Yes to continue.
46
You can see the system is
raising CPU clock until the
system hangs.
Push RESET button on the
front panel of your system to
restart the computer.
4
Run FOX ONE program
again, it will inform you
the previous test found
that 255MHz is the
recommended CPU clock for
your system.
Click Yes to apply it to your
system.
Now, your system is running

at a CPU clock of 255MHz.
47
FOX Intelligent Stepping (F.I.S., Optional)
Select FOX Intelligent Stepping will allow your system to automatically adjust your
CPU clock rate based on different system loadings. For example, if you select Power
Gaming, CPU clock will be driven to run at its maximum speed. While in Energy
Saving, CPU will lower down its speed to a minimum. The four benchmarks - Power
Gaming, Data Mining, Office and Energy Saving, the references of their system
loading were calculated and defined in the FIS Calibration option of Configuration
menu. Select Auto, CPU will automatically adjust its clock according to current system
loading.
4
3. Frequency Page - Frequency Control

This page lets you set memory and PCI Express frequencies by manual.
Go to Freq. page
Close this page
Select the option

you want to set
Adjust by manual
Reset the changes Apply the changes
48
4. Limit Setting
4.1 Limit Setting - CPU Temperature

This page lets you to set CPU high limit temperature and enable the alert function.
Go to Limit Setting Show current CPU
page temperature value
Enable alert function

when the CPU
temperature is higher
than high limit value
4
Show current high
limit value of the CPU
temperature
Set high limit by

dragging the lever
4.2 Limit Setting - System Temperature

This page lets you to set system high limit temperature and enable the alert function.
Show current system
temperature value

when the system
temperature is higher
than high limit value
Show current high
limit value of system
temperature
Set high limit by

dragging the lever
49
4.3 Limit Setting - CPU Fan
This page lets you to set CPU fan low limit rpm and enable the alert function.
Show current CPU
fan rpm value

when the CPU fan runs
slower than the low
limit rpm value
Show current low limit

rpm value of CPU fan
4
Set low limit rpm by

dragging the lever
4.4 Limit Setting - System Fan

This page lets you to set system fan low limit rpm and enable the alert function.
Show current system

fan rpm value

when the system fan
runs slower than low
limit rpm value
rpm value of system
fan

dragging the lever
50
4.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and enable the alert function.
Show current FAN1

fan rpm value

when the FAN1 fan
runs slower than low
limit rpm value
rpm value of FAN1 fan
4
dragging the lever
5. Voltage Page - Voltage Control (Optional)

This page lets you set CPU voltage, memory voltage and North Bridge voltage
manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is
0.05V/step, and North Bridge is 0.04V/step.
Go to Voltage page
Select the option

you want to set
Adjust by manual
Reset the changes Apply the changes
51
6. Fan Page - Fan Control
This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
Go to Fan page
Enable or disable
smart fan function
Set fan speed by
4
dragging the lever
Apply the changes
52
FOX LiveUpdate
FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by
local or online.

■ Windows 2000
■ Windows XP (32-bit and 64-bit)
■ Windows 2003 (32-bit and 64-bit)
■ Windows Vista (32-bit and 64-bit)
4
Using FOX LiveUpdate :
1. Local Update
1-1 Local Update - BIOS Information
This page lets you know your system BIOS information.
Link to website Minimum
Exit
Toolbar Show current

BIOS information
*** : please refer to the physical motherboard for detail.
53
1-2 Local Update - Backup
This page can backup your system BIOS. You can click “Backup”, and key in a file name, then
click “Save” to finish the backup operation. The extension of this backup file is ".BIN" for Award
BIOS and ".ROM" for AMI BIOS. Default directory is "C:\Desktop\My Documents" in Windows XP
and "Documents" in Vista. Make sure you can remember the file name together with the directory
which it is stored, prevented that you may need them to recover your BIOS later.
Key in a BIOS name

4
Click here
1-3 Local Update - Update

This page helps you to update your BIOS from a local file. After click “Update”, An alert message
will be displayed to ensure if you really want to continue, click “Yes” to confirm. A setup wizard
will guide you to load a local BIOS file to finish the operation. You must remember from which
directory to load your new BIOS file (with an extension of ".BIN" for Award BIOS, ".ROM" for AMI
BIOS) before the setup wizard starts.
!
N
IO
UT
CA
FOX LiveUpdate can automatically backup old BIOS before update. This feature can be
enabled in the "Configure-System" setup. Please refer to "Configure-System" section
for more detail. The default backup directory is C:\LiveUpdate_Temp, but the backup
file name will be automatically generated. It is hard to find it out from a backup directory,
and we recommend you using Explorer to check date/time message of this backup file
to find it out and write its name down to remember it.
54
2. Online Update
2-1 Online Update - Update BIOS
This page lets you update your system BIOS from Internet. Click “start”, it will search the new
BIOS from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
4
Search new BIOS
from Internet
Select BIOS to update
Browse detailed
information
Update BIOS
Close the window
2-2 Online Update - Update Driver

This page lets you update your system drivers from Internet. Click “start”, it will search the new
drivers from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new drivers

from Internet
55
Select the driver to update
Browse detailed
information
Install the selected
driver
Close the window
2-3 Online Update - Update Utility

4
This page lets you update utilities from Internet. Click “start”, it will search the new utilities from
Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new utilities

from Internet
Select the utility to update
Browse detailed
information
Install the selected
utility
Close the window
56
2-4 Online Update - Update All
This page lets you update your system drivers from Internet. Click “start”, it will search all new
BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
4
Search all new BIOS/
drivers/utilities from
Internet
Browse detailed
BIOS information
Browse detailed
driver information
Browse detailed
utility information
Close the window
57
3. Configure
3-1 Configure - option
This page lets you set auto search options. After you enable the auto search function, FOX
LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a
message on the task bar to inform you to do the next step.
Click here
Set auto
search options
4
Set auto search

the latest
FOX LiveUpdate
Select search
which kind of
versions
Apply the changes Reset to default value
Double click on the icon as show below, you can see the detailed information.
Double click here
58
When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will
auto search from internet and prompt you to install the new version.
Prompt you to
install the new
FOX LiveUpdate
4
3-2 Configure - System
This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate
utility.
Click here
Set the location of

download files or
auto backup BIOS
Select different skin

of the software
Reset to default value
Determine if the FOX LiveUpdate can Apply the changes

auto run when the system starts up
59
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
Click here
Select which BIOS ROM

to flash(Only available to
motherboard with backup
BIOS ROM )
Select to flash Boot Block

Select to clear CMOS
4
Apply the changes Reset to default value
and without any interruption.
!
N
IO
UT
CA
We recommend that you had better keep the default setting unchanged to avoid any
damage.
4. About & Help

This page shows some information about FOX LiveUpdate.
Click here
Show information about

FOX LiveUpdate
60
FOX LOGO
FOX LOGO is a simple and useful utility to backup, change and delete the boot time
Logo. The boot Logo is the image that appears on screen during POST (Power-On
Self-Test).
You can prepare a JPG image (1024x768) file, then use FOX LOGO to open it and
change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS
"Quiet Boot" setting in "Advanced BIOS Features" menu.

■ Windows 2000
4
Using FOX LOGO:
Main Page
Main screen
Exit
Backup
Minimize
Change Website
About
Delete
NING
AR !
W
When you change Logo or delete current Logo, the system will flash BIOS file auto-
matically. During this time, please DO NOT shut down the application and the system,
or the motherboard will be damaged seriously.
61
FOX DMI
FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data
formats : Report, Data Fields and Memory Dump.
With DMI information, system maker can easily analyze and troubleshoot your mother-
board if there is any problem occurred.

■ Windows 2000
4
Using FOX DMI:
Please operate this utility as the comments shows.
Click here to select Click here to select

the type you want the DMI Data format
to view. you need
62

G41S Series Motherboard User's Manual

Uploaded by

Copyright:

Available Formats

G41S Series Motherboard User's Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

G41S Series Motherboard User's Manual

Uploaded by

Copyright:

Available Formats

G41S Series

better, and tells you how to avoid problems.

Warning : indicating a potential risk of hardware damage or physical injury

© All rights reserved.

HON HAI PRECISION INDUSTRY COMPANY LTD

declares that the product

■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio

Signature : Place / Date : TAIPEI/2009

Printed Name : James Liang

Trade Name: FOXCONN

Equipment Classification: FCC Class B Subassembly

Signature : Date : 2009

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certified fans in order to avoid damage

Chapter 1 Product Introduction

Chapter 2 Hardware Install

Chapter 3 BIOS Setup

Worldwide online contact Support :

CPU, Memory, VGA Compatibility Supporting Website :

With advanced overclocking capability and a range of connectivity

This chapter includes the following information:

CPU upport LGA775 socket Intel® CPU:

Wolfdale/Conroe/ Conroe-L processors

This motherboard does not support Windows® 2000.

1. CPU Socket 11. North Bridge: Intel® G41 Chipset

PS/2 Keyboard Port VGA Port USB Ports Audio Ports

1. PS/2 Mouse Port

2. PS/2 Keyboard Port

3. Coaxial SPDIF_OUT Connector

Port 2-channel 4-channel 5.1-channel

Left: Active Right: Link

G41S supports 10/100Mb/s Ethernet.

This chapter includes the following information :

Hyper-Threading Technology System Requirements:

Install the CPU

Pin­-1 Corner of the CPU

5. When CPU is properly seated,

2. Place the four bolts of the CPU

Release bolts of CPU cooler from

installing an expansion card to prevent hardware damage.

PCI Express x16

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

• Removing the Card:

Pin # Definition Pin # Definition

4 +5V 16 PS_ON(Soft On/Off)

9 +5V SB(Stand by +5V) 21 +5V

We recommend you using a 24-pin power supply.

4-pin ATX 12 V Power Connector : PWR2

Front Panel Connector : FP1

This motherboard includes one connector for connecting the SATA_1/2

Hard Disk LED Connector (HDD-LED)

Reset Switch (RESET-SW)

Power LED Connector (PWR-LED)

is directional with +/- sign. RESET-SW PWR-SW

USB Connectors : F_USB1/2

Jumper Diagram Definition Description

Clear CMOS Jumper: CLR_CMOS

Pin-1 Corner of the CPU