Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 150 views

    Spreader Bar Calculation Instr

    Uploaded by

    Dhy Dhothd
    The document provides a report on the input configuration and output analysis of a spreader bar used to lift a 75 ton load. Key details include: - The 25 foot long spreader bar is made of 8.63 inch diameter pipe and used vertical slings rated for 75 tons. - The analysis found the pipe axial and bending stresses were below allowable limits. - The top shackle would experience a 43 ton load, below its 60 ton capacity. The bottom shackle load of 38 tons was also below its 44 ton rating. - The graphical results show component loads and capacities, and indicate the system can safely lift the 75 ton load.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Spreader Bar Calculation Instr

    Uploaded by

    Dhy Dhothd
    150 views3 pages
    The document provides a report on the input configuration and output analysis of a spreader bar used to lift a 75 ton load. Key details include: - The 25 foot long spreader bar is made of 8.63 inch diameter pipe and used vertical slings rated for 75 tons. - The analysis found the pipe axial and bending stresses were below allowable limits. - The top shackle would experience a 43 ton load, below its 60 ton capacity. The bottom shackle load of 38 tons was also below its 44 ton rating. - The graphical results show component loads and capacities, and indicate the system can safely lift the 75 ton load.

    Original Description:

    Spreader Bar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a report on the input configuration and output analysis of a spreader bar used to lift a 75 ton load. Key details include: - The 25 foot long spreader bar is made of 8.63 inch diameter pipe and used vertical slings rated for 75 tons. - The analysis found the pipe axial and bending stresses were below allowable limits. - The top shackle would experience a 43 ton load, below its 60 ton capacity. The bottom shackle load of 38 tons was also below its 44 ton rating. - The graphical results show component loads and capacities, and indicate the system can safely lift the 75 ton load.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    150 views3 pages

    Spreader Bar Calculation Instr

    Uploaded by

    Dhy Dhothd
    The document provides a report on the input configuration and output analysis of a spreader bar used to lift a 75 ton load. Key details include: - The 25 foot long spreader bar is made of 8.63 inch diameter pipe and used vertical slings rated for 75 tons. - The analysis found the pipe axial and bending stresses were below allowable limits. - The top shackle would experience a 43 ton load, below its 60 ton capacity. The bottom shackle load of 38 tons was also below its 44 ton rating. - The graphical results show component loads and capacities, and indicate the system can safely lift the 75 ton load.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SMART Rigger Software LLC

    Spreader Bar Basic Report


    Job Number: Customer:

    Description: Date:

    Spreader Bar Input Configuration

    Design Factor: 3 Top Shackle Type: Wide Body

    Impact Factor: 1,00 Top Shackle Size: 55

    Lifting Load: 75,00 Ton Bottom Shackle Type: Wide Body

    Spreader Bar Length: 25,00 ft Bottom Shackle Size: 7

    Endcap Deduction Length: 12,00 in Sling Type: 1-Part Mechanical Spliced IWRC (EIPS,
    6X19)
    Link Plate & Endcap Weight: 125,00 Lbf Sling Configuration: Vertical Basket

    Sling Size: 2.75 in

    Sling Length: 25,00 ft

    Spreader Bar Pipe Properties:

    Pipe Size: Pipe Material Strength or Pipe: 35,00 ksi

    ASME Pipe Sch: Pipe8SCH80 Pipe Area Moment of 100,00 in^4


    Inertia:
    Pipe OD: 8,63 in Pipe Section Modulus: 23,10 in^3

    Pipe ID: 7,63 in Pipe Radius of Gyration: 2,89 in

    Pipe Wall Thickness: 0,465 in Weight Per Linear Foot: 43,40 Lbf/ft

    Pipe Cross Sectional Area: 11,90 in^2


    All Percentages must be below 100%. Red
    Numbers or Text Indicate Failure and/or
    Inadequate Strength
    Spreader Bar Output Configuration

    Spreader Bar Pipe Check:

    Pipe Axial Stress: 3,51 ksi < 7,40 ksi Allowed Axial Stress

    Pipe Bending Stress: 2,02 ksi < 11,67 ksi Allowed Bending Stress

    1
    SMART Rigger Software LLC

    Combined Stress (ASME-BTH-1, Eq 3.32): 75,6 % Width-Thickness Ratio (d/t): 18.5

    Combined Stress (ASME-BTH-1, Eq 3.33): 47,4 % Limit (d/t) Ratio Axial Compress: 91.14

    Combined Stress (ASME-BTH-1, Eq 3.34): 64,7 % Limit (d/t) Ratio Flex,Compact: 58


    Slenderness Ratio: 95,5 < 150 Limit (d/t) Ratio Flex,Non- 256.86
    Compact:
    Critical Slenderness Ratio: 127,9

    Spreader Bar Component Check & Loadings:

    Top Sling Loading: 43,25 Ton Top Shackle Load: 43,25 Ton

    Top Sling Capacity: NaN Ton Top Shackle Capacity: 60,61 Ton

    Top Sling Percent Capacity: NaN % Top Shackle Percent Capacity: 71,36 %

    Sling Bending (D/d) Efficiency: 100,00 % Bottom Shackle Load: 37,52 Ton

    Sling Termination Efficiency: 0,00 % Bottom Shackle Capacity: 44,08 Ton

    Bottom Shackle Percent Capacity: 85,12 %


    Spreader Bar Geometry & Rigging Weight:

    Spreader Bar Geometry:

    Vertical Height from Centerline of Pipe to Hook: 22,65 ft Sling Angle: 61,11 Deg

    Spreader Bar Rigging Weight:

    998,2 Lbf
    Spreader Bar Pipe Weight:
    Total Top Shackle Weight: 136,0 Lbf

    Total Bottom Shackle Weight: 92,0 Lbf

    Top Sling Weight: 0,0 Lbf

    Total Link Plate and Endcap Weight: 250,0 Lbf

    Total Rigging Weight: 1.476,20 Lbf

    Total Rigging Weight + Lifting Load: 151.476,2 Lbf

    2
    SMART Rigger Software LLC

    Spreader Bar Graphical Results:

    2.75 X 1-Part Mechanical Spliced


    IWRC (EIPS, 6X19)
    Sling Config: Vertical Basket
    Length: 25,00 ft
    SWL: NaN Ton
    Tension: 43,25 Ton
    Percent Capacity: NaN %

    22,65 ft

    55 X Wide Body
    SWL: 60,61 Ton
    Tension: 43,25 Ton
    Percent Capacity: 71,36 %

    61,11 Deg

    Vertical Deflection Of Pipe = 0,132 in

    25,00 ft

    Pipe, Pipe8SCH80, OD 8,63 in, ID 7,63 in


    ASME-BTH-1, EQ 3-32 Percent Capacity = 75,6 %
    ASME-BTH-1, EQ 3-33 Percent Capacity = 47,4 % 7 X Wide Body
    ASME-BTH-1, EQ 3-34 Percent Capacit = 64,7 % SWL: 44,08 Ton
    Axial Stress = 3,51 ksi Tension: 37,52 Ton
    Bending Stress = 2,02 ksi Percent Capacity: 85,12 %
    Slenderness Ratio = 95,5
    Width - Thickness (d/t) Ratio = 18.5

    Note:
    RED Text Indicates Failure
    General Representative Layout: Picture is not Geometric Scale, Slings
    and Shackles are Representative Only, See Selection and Descriptions

    All reported sling capacities must be verified by sling manufacture for the specific lift configuration. Endcap and Link plate capacities are not
    calculated and must be confirmed sufficient for use per ASME-BTH-1 lifting code by a qualified person. Spreader Bar calculations are based on
    inline compression force with center line of pipe, without any other external forces applied or considered. Pipe is considered straight without
    holes and defect free. Results and the application there of must be confirmed for use by a qualified person.

    You might also like