Lenntech GRUNDFOS DATA BOOKLET

BMP
High-pressure piston pumps
50/60 Hz
 Contents

Product data
Introduction Page 3
Features and benefits Page 3
Applications Page 3
Pumped liquids Page 3
Type key Page 4
Motor Page 4
Sound pressure level Page 4
Positioning Page 4
Curve conditions Page 4
Pumping systems Page 5

Construction
Sectional drawing Page 6
Materials Page 6

Performance curves
BMP pump range Page 7
BMP, -N, -R Page 8
BMP-N pump range Page 8
BMP, -N, -R Page 9
BMP-R pump range Page 9

Product range
BMP, -N, -R, IEC, 50/60 Hz Page 10
BMPE, -N, -R, IEC Page 11
BMP, -N, -R, cURus Page 12
BMPE, -N, -R, cURus Page 13
BMP, -N, -R, IEC, Japan Page 14

Accessories
Page 15

Technical data
BMP, -N, -R, IEC, 50/60 Hz Page 17
BMP, -N, -R, cURus Page 19
BMP, -N, -R, IEC, Japan Page 20
Dimensions, BMP Page 21
Dimensions, BMPE Page 23

Lenntech
info@lenntech.com
info@lenntech.com Tel.
Tel. +31-152-610-900
+31-152-610-900
www.lenntech.com
www.lenntech.com Fax.
Fax.+31-152-616-289
+31-152-616-289

2
Product data BMP, -N, -R

Introduction Applications
This data booklet deals with BMP and BMPE pumps. BMP pumps are suitable for a variety of applications
ranging from pumping of potable water to pumping of
Grundfos BMP, Booster Module Piston pumps, are de-
chemicals. The pumps can therefore be used in a wide
signed for the transfer of liquids under high pressure.
diversity of pumping systems where the performance
The pumps are based on the axial piston principle en-
and pump materials must meet specific requirements.
abling a very light and compact design.
Examples of applications:
The BMP pump range consists of three variants:
• BMP for clean water Application Examples
• Vehicle washing
• BMP-N for technical water
Cleaning/washing • Cleaning of food plants
• BMP-R for seawater. • Cleaning of filters

The motor of BMP pumps is a Grundfos motor designed • Injection of pesticides

Injecting
to EN standards. • Machine tool coolants
• Lumber conditioning
The pumps are available with nominal flow rates from Misting • Odour control
0.2 to 10.2 m3/h at pressures up to 160 bar. • Temperature control
• Chemicals
BMPE
Processing • Ham or turkey deboning
The BMPE versions are supplied with an external fre- • Reverse osmosis/ultra-filtration
quency converter set to operate with a constant torque.
Frequency control enables continuously variable control Pumped liquids
of motor speed, which makes it possible to set the pump Pump type Recommended pumped liquids
to operate at any duty point within the allowed speed • Raw water
range. The aim of continuously variable control of the • potable water
motor speed is to adjust the performance to a given flow BMP
• groundwater
requirement. • surface water (lakes and rivers).
• Softened water (cation exchange)
Features and benefits • demineralised water
(demineralised/de-ionised water)
• High efficiency BMP-N • water processed according to the reverse osmosis
principle (RO water)
• Small and light If coolants such as HFA, HFC, etc. are to be pumped,
• Generates insignificant pulsations in the discharge please contact Grundfos.
line • Brackish water
• sea water
• No preventive maintenance required BMP-R
• brine
• Long service life • water containing various chemicals.

• Few wear parts

• Wide speed control range
• Extreme recirculation capability without overheat-
ing (up to 90%)
• Lubricated by the pumped liquid.

3
 Product data BMP, -N, -R

Type key Positioning

Example BMP 2.5 - A O G BBVP The suction port is marked with an "I".
Pump range
BMP = With standard motor The discharge port is marked with an "O".
BMPE = With external frequency
converter
Maximum flow rate [m3/h]

TM02 9372 2504

Blank = All components in contact with
the pumped liquid are made of
stainless steel EN/DIN 1.4301 and PEEK
N= Designed for demineralised water.
All components in contact with
the pumped liquid are made of
stainless steel EN/DIN 1.4301 and PEEK Fig. 1 Position of pump
R= All components in contact with
the pumped liquid are made of
stainless steel 1.4410 and PEEK The pump must be installed on a solid foundation by
Code for pump version means of the bolt holes in the foot-mounted motor. It is
A = First generation recommended to use vibration-absorbing machine feet.
Code for pipe connection
O = External thread
Dimensional sketches and dimensions, see pages 21 to
G = Victaulic/PJE 23.
Code for materials
I = Stainless steel (1.4301)
G = Stainless steel (1.4401) Curve conditions
Code for shaft seal • The performance curves apply to operation at maxi-
B = Bellows (rubber)
B = Carbon mum discharge pressure, see page 10.
V = Al2O3
• The curves apply to a kinematic viscosity of 1 mm2/s
P = NBR
(1 cSt).
The performance tests have been made at a water
Motor temperature of 20°C.
Test liquid: Airless water.
Grundfos standard motors - MG or MMG
• All curves according to ISO 9906 Annex A.
BMP pumps are fitted with totally enclosed, fan-cooled,
2- or 4-pole Grundfos standard motors with principal • The pump pressure only depends on the counter
dimensions according to the EN standards. pressure from the system.
All BMP pumps are able to produce a pressure from
Electrical tolerances according to EN 60 034. 10 bar to maximum pressure at the rated flow.
All motors are efficiency class 1 (EFF 1).
Motors designed for the US market are IEC motors recog-
nised in accordance with cURus (Recognised Component
Mark for Canada and the United States). These motors
are EPAct marked (Energy Policy Act).

Sound pressure level

The table below indicates the sound pressure level in
dB(A) measured in a reverberation room at a distance of
1 metre from the pump. The anechoic noise level is calcu-
lated by subtracting 3 dB(A) from the stated values.
Sound pressure level in dB(A) at 140 bar*, 50 Hz
BMP 0.2 72.4 BMP 0.3 N 72.3 BMP 0.6 R 72.4
BMP 0.4 72.6 BMP 0.6 N 72.4 BMP 1.0 R 72.6
BMP 0.6 72.8 BMP 1.0 N 72.8 BMP 1.8 R 71.7
BMP 1.0 71.3 BMP 1.7 N 72.0 BMP 2.2 R 71.7
BMP 1.2 71.3 BMP 2.1 N 72.0 BMP 5.1 R 78.0
BMP 2.5 71.4 BMP 3.4 N 71.4 BMP 6.5 R 78.0
BMP 3.2 72.4 BMP 4.4 N 72.4 BMP 7.2 R 78.0
BMP 6.2 78.3 BMP 6.2 N 78.3 BMP 8.2 R 78.0
BMP 7.0 78.3 BMP 7.0 N 78.3 BMP 10.2 R 78.0
BMP 8.0 78.3 BMP 8.0 N 78.3

4
Product data BMP, -N, -R

Pumping systems
The BMP pumps are suitable for both closed and open pumping systems.
A
C E
D F G H
B

TM02 9373 2504

Fig. 2 Example of closed pumping system

H
D E F G

TM02 9372 2504

Fig. 3 Example of open pumping system

Legend:
Pos. Description
A Water tank
B Level switch
C Pressure gauge
D Prefilter, maximum 10 microns (abs. β10 > 5000)
E Low-pressure switch
F BMP pump
G Non-return valve
H Application
I Pressure relief valve (adjustable)

5
 Construction BMP, -N, -R

Sectional drawing

51 105 120 115 121 149 122 123

TM02 9349 2404

Fig. 4 BMP pump

Materials
DIN AISI/ASTM
Pos. Designation Materials
BMP BMP-N BMP-R BMP BMP-N BMP-R
51 Shaft Stainless steel 1.4057 1.4057 1.4057 AISI 431 AISI 431 AISI 431
105 Shaft seal Carbon/NBR
115 Pump housing Stainless steel 1.4301 1.4301 1.4462 AISI 304 AISI 304 SAF 2205
120 Port plate PEEK
121 Pump rotor Stainless steel 1.4057 1.4057 1.4410 AISI 431 AISI 431 SAF 2507
122 Rotor guide PEEK
123 Piston pad PEEK
149 Piston Stainless steel 1.4057 1.4057 1.4057 AISI 431 AISI 431 AISI 431
Rubber parts EPDM or FKM

6
Performance curves BMP, -N, -R

BMP pump range

2.0

1.2
m3/h

1.0 1.0

0.6
0.4
0.2
0.0
800

1000

1200

1400

1600

1800

TM02 9317 2304

RPM

Fig. 5 Performance curves for BMP 0.2 to 1.2

10.0

8.0 8.0
7.0
6.0 6.2
m3/h

4.0
3.2
2.5
2.0

0.0
800

1000

1200

1400

1600

1800

TM02 9316 2304

RPM
Fig. 6 Performance curves for BMP 2.5 to 8.0

7
 Performance curves BMP, -N, -R

BMP-N pump range

3.0

2.1
2.0
1.7
m3/h

1.0 1.0
0.6
0.3
0.0

TM02 9318 2304

1000

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000
RPM
Fig. 7 Performance curves for BMP 0.3 N to 2.1 N

8.0 8.0
7.0
6.2
6.0

4.4
m3/h

4.0
3.4

2.0

0.0
1000

1200

1400

1600

1800

2000

2200

2400

TM02 9319 2304

RPM
Fig. 8 Performance curves for BMP 3.4 N to 8.0 N

8
Performance curves BMP, -N, -R

BMP-R pump range

3.0

2.2
2.0
1.8
m3/h

1.0
1.0
0.6

0.0

TM02 9320 2304

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000
RPM
Fig. 9 Performance curves for BMP 0.6 R to 2.2 R

12.0
10.2
10.0
8.2
8.0
7.2
m3/h

6.5
6.0
5.1
4.0

2.0

0.0
800

1000

1200

1400

1600

1800

TM02 9321 2304

RPM
Fig. 10 Performance curves for BMP 5.1 R to 10.2 R

9
 Product range BMP, IEC

BMP, -N, -R, IEC, 50/60 Hz

3 x 380-415 V, 50 Hz
3 x 380-480 V, 60 Hz
BMP
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.2 MG 1.5 700 - 1800 0.2 10 - 100 96126000

BMP 0.4 MG 2.2 700 - 1800 0.4 10 - 140 96126001
BMP 0.6 MG 4.0 700 - 1800 0.6 10 - 140 96126002
BMP 1.0 MMG 7.5 700 - 1800 1.0 10 - 160 96126003
BMP 1.2 MMG 7.5 700 - 1800 1.2 10 - 160 96126004
BMP 2.5 MMG 15.0 700 - 1800 2.5 10 - 160 96126005
BMP 3.2 MMG 18.5 700 - 1800 3.2 10 - 160 96126006
BMP 6.2 MMG 37.0 700 - 1800 6.2 10 - 160 96126008
BMP 7.0 MMG 45.0 700 - 1800 7.0 10 - 160 96126009
BMP 8.0 MMG 45.0 700 - 1800 8.0 10 - 160 96126010

BMP-N
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.3 N MG 1.5 1000 - 3000 0.3 10 - 100 96125900

BMP 0.6 N MG 2.2 1000 - 3000 0.6 10 - 100 96125901
BMP 1.0 N MG 4.0 1000 - 3000 1.0 10 - 100 96125902
BMP 1.7 N MMG 11.0 1000 - 3000 1.7 10 - 140 96125903
BMP 2.1 N MMG 11.0 1000 - 3000 2.1 10 - 140 96125904
BMP 3.4 N MMG 15.0 1000 - 2400 3.4 10 - 140 96125905
BMP 4.4 N MMG 22.0 1000 - 2400 4.4 10 - 140 96125906
BMP 6.2 N MMG 37.0 1000 - 1800 6.2 10 - 140 96125907
BMP 7.0 N MMG 37.0 1000 - 1800 7.0 10 - 140 96125908
BMP 8.0 N MMG 45.0 1000 - 1800 8.0 10 - 140 96125909

BMP-R
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMP 0.6 R MG 2.2 700 - 3000 0.6 10 - 80 96126100

BMP 1.0 R MG 3.0 700 - 3000 1.0 10 - 80 96126101
BMP 1.8 R MG 5.5 700 - 3000 1.8 10 - 80 96126102
BMP 2.2 R MG 5.5 700 - 3000 2.2 10 - 80 96126103
BMP 5.1 R MMG 15.0 700 - 1800 5.1 10 - 80 96126104
BMP 6.5 R MMG 18.5 700 - 1800 6.5 10 - 80 96126105
BMP 7.2 R MMG 22.0 700 - 1800 7.2 10 - 80 96126106
BMP 8.2 R MMG 22.0 700 - 1800 8.2 10 - 80 96126107
BMP 10.2 R MMG 30.0 700 - 1800 10.2 10 - 80 96126108

10
Product range BMPE, IEC

BMPE, -N, -R, IEC

3 x 380-500 V
BMPE
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMPE 0.2 MG 1.5 VLT 5003 (1.5 kW) 700 - 1800 0.2 10 - 100 96126040
BMPE 0.4 MG 2.2 VLT 5004 (2.2 kW) 700 - 1800 0.4 10 - 140 96126041
BMPE 0.6 MG 4.0 VLT 5006 (4.0 kW) 700 - 1800 0.6 10 - 140 96126042
BMPE 1.0 MMG 7.5 VLT 5011 (7.5 kW) 700 - 1800 1.0 10 - 160 96126043
BMPE 1.2 MMG 7.5 VLT 5011 (7.5 kW) 700 - 1800 1.2 10 - 160 96126044
BMPE 2.5 MMG 15.0 VLT 5022 (15.0 kW) 700 - 1800 2.5 10 - 160 96126045
BMPE 3.2 MMG 18.5 VLT 5027 (18.5 kW) 700 - 1800 3.2 10 - 160 96126046
BMPE 6.2 MMG 37.0 VLT 5052 (37.0 kW) 700 - 1800 6.2 10 - 160 96126048
BMPE 7.0 MMG 45.0 VLT 5062 (45.0 kW) 700 - 1800 7.0 10 - 160 96126049
BMPE 8.0 MMG 45.0 VLT 5062 (45.0 kW) 700 - 1800 8.0 10 - 160 96126050

BMPE-N
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type
[kW] [min-1] [m3/h] [bar]

BMPE 0.3 N MG 1.5 VLT 5003 (1.5 kW) 1000 - 3000 0.3 10 - 100 96125940
BMPE 0.6 N MG 2.2 VLT 5004 (2.2 kW) 1000 - 3000 0.6 10 - 100 96125941
BMPE 1.0 N MG 4.0 VLT 5006 (4.0 kW) 1000 - 3000 1.0 10 - 100 96125942
BMPE 1.7 N MMG 11.0 VLT 5016 (11.0 kW) 1000 - 3000 1.7 10 - 140 96125943
BMPE 2.1 N MMG 11.0 VLT 5016 (11.0 kW) 1000 - 3000 2.1 10 - 140 96125944
BMPE 3.4 N MMG 15.0 VLT 5022 (15.0 kW) 1000 - 2400 3.4 10 - 140 96125945
BMPE 4.4 N MMG 22.0 VLT 5032 (22.0 kW) 1000 - 2400 4.4 10 - 140 96125946
BMPE 6.2 N MMG 37.0 VLT 5052 (37.0 kW) 1000 - 1800 6.2 10 - 140 96125947
BMPE 7.0 N MMG 37.0 VLT 5052 (37.0 kW) 1000 - 1800 7.0 10 - 140 96125948
BMPE 8.0 N MMG 45.0 VLT 5062 (45.0 kW) 1000 - 1800 8.0 10 - 140 96125949

BMPE-R
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMPE 0.6 R MG 2.2 VLT 5004 (2.2 kW) 700 - 3000 0.6 10 - 80 96126140
BMPE 1.0 R MG 3.0 VLT 5005 (3.0 kW) 700 - 3000 1.0 10 - 80 96126141
BMPE 1.8 R MG 5.5 VLT 5008 (5.5 kW) 700 - 3000 1.8 10 - 80 96126142
BMPE 2.2 R MG 5.5 VLT 5008 (5.5 kW) 700 - 3000 2.2 10 - 80 96126143
BMPE 5.1 R MMG 15.0 VLT 5022 (15.0 kW) 700 - 1800 5.1 10 - 80 96126144
BMPE 6.5 R MMG 18.5 VLT 5027 (18.5 kW) 700 - 1800 6.5 10 - 80 96126145
BMPE 7.2 R MMG 22.0 VLT 5032 (22.0 kW) 700 - 1800 7.2 10 - 80 96126146
BMPE 8.2 R MMG 22.0 VLT 5032 (22.0 kW) 700 - 1800 8.2 10 - 80 96126147
BMPE 10.2 R MMG 30.0 VLT 5042 (30.0 kW) 700 - 1800 10.2 10 - 80 96126148

11
 Product range BMP, cURus

BMP, -N, -R, cURus

3 x 230/400 V, 60 Hz
BMP
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.2 MG 1.5 700 - 1800 0.2 10 - 100 96126060

BMP 0.4 MG 2.2 700 - 1800 0.4 10 - 140 96126061
BMP 0.6 MG 4.0 700 - 1800 0.6 10 - 140 96126062
BMP 1.0 MMG 7.5 700 - 1800 1.0 10 - 160 96126063
BMP 1.2 MMG 7.5 700 - 1800 1.2 10 - 160 96126064
BMP 2.5 MMG 15.0 700 - 1800 2.5 10 - 160 96126065
BMP 3.2 MMG 18.5 700 - 1800 3.2 10 - 160 96126066
BMP 6.2 MMG 37.0 700 - 1800 6.2 10 - 160 96126068
BMP 7.0 MMG 45.0 700 - 1800 7.0 10 - 160 96126069
BMP 8.0 MMG 45.0 700 - 1800 8.0 10 - 160 96126070

BMP-N
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.3 N MG 1.5 1000 - 3000 0.3 10 - 100 96125960

BMP 0.6 N MG 2.2 1000 - 3000 0.6 10 - 100 96125961
BMP 1.0 N MG 4.0 1000 - 3000 1.0 10 - 100 96125962
BMP 1.7 N MMG 11.0 1000 - 3000 1.7 10 - 140 96125963
BMP 2.1 N MMG 15.0 1000 - 3000 2.1 10 - 140 96125964
BMP 3.4 N MMG 18.5 1000 - 2400 3.4 10 - 140 96125965
BMP 4.4 N MMG 22.0 1000 - 2400 4.4 10 - 140 96125966
BMP 6.2 N MMG 37.0 1000 - 1800 6.2 10 - 140 96125967
BMP 7.0 N MMG 37.0 1000 - 1800 7.0 10 - 140 96125968
BMP 8.0 N MMG 45.0 1000 - 1800 8.0 10 - 140 96125969

BMP-R
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMP 0.6 R MG 2.2 700 - 3000 0.6 10 - 80 96126160

BMP 1.0 R MG 4.0 700 - 3000 1.0 10 - 80 96126161
BMP 1.8 R MG 5.5 700 - 3000 1.8 10 - 80 96126162
BMP 2.2 R MG 7.5 700 - 3000 2.2 10 - 80 96126163
BMP 5.1 R MMG 15.0 700 - 1800 5.1 10 - 80 96126164
BMP 6.5 R MMG 18.5 700 - 1800 6.5 10 - 80 96126165
BMP 7.2 R MMG 22.0 700 - 1800 7.2 10 - 80 96126166
BMP 8.2 R MMG 22.0 700 - 1800 8.2 10 - 80 96126167
BMP 10.2 R MMG 30.0 700 - 1800 10.2 10 - 80 96126168

12
Product range BMPE, cURus

BMPE, -N, -R, cURus

3 x 380-500 V, 60 Hz
BMPE
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMPE 0.2 MG 1.5 VLT 5003 (1.5 kW) 700 - 1800 0.2 10 - 100 96126051
BMPE 0.4 MG 2.2 VLT 5004 (2.2 kW) 700 - 1800 0.4 10 - 140 96126052
BMPE 0.6 MG 4.0 VLT 5006 (4.0 kW) 700 - 1800 0.6 10 - 140 96126053
BMPE 1.0 MMG 7.5 VLT 5011 (7.5 kW) 700 - 1800 1.0 10 - 160 96126054
BMPE 1.2 MMG 7.5 VLT 5011 (7.5 kW) 700 - 1800 1.2 10 - 160 96126055
BMPE 2.5 MMG 15.0 VLT 5022 (15.0 kW) 700 - 1800 2.5 10 - 160 96126056
BMPE 3.2 MMG 18.5 VLT 5027 (18.5 kW) 700 - 1800 3.2 10 - 160 96126057
BMPE 6.2 MMG 37.0 VLT 5052 (37.0 kW) 700 - 1800 6.2 10 - 160 96126059
BMPE 7.0 MMG 45.0 VLT 5062 (45.0 kW) 700 - 1800 7.0 10 - 160 96126071
BMPE 8.0 MMG 45.0 VLT 5062 (45.0 kW) 700 - 1800 8.0 10 - 160 96126072

BMPE-N
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type -1 3 [bar]
[kW] [min ] [m /h]

BMPE 0.3 N MG 1.5 VLT 5003 (1.5 kW) 1000 - 3000 0.3 10 - 100 96125950
BMPE 0.6 N MG 2.2 VLT 5004 (2.2 kW) 1000 - 3000 0.6 10 - 100 96125951
BMPE 1.0 N MG 4.0 VLT 5006 (4.0 kW) 1000 - 3000 1.0 10 - 100 96125952
BMPE 1.7 N MMG 11.0 VLT 5016 (11.0 kW) 1000 - 3000 1.7 10 - 140 96125953
BMPE 2.1 N MMG 15.0 VLT 5016 (11.0 kW) 1000 - 3000 2.1 10 - 140 96125954
BMPE 3.4 N MMG 18.5 VLT 5022 (15.0 kW) 1000 - 2400 3.4 10 - 140 96125955
BMPE 4.4 N MMG 22.0 VLT 5032 (22.0 kW) 1000 - 2400 4.4 10 - 140 96125956
BMPE 6.2 N MMG 37.0 VLT 5052 (37.0 kW) 1000 - 1800 6.2 10 - 140 96125957
BMPE 7.0 N MMG 37.0 VLT 5052 (37.0 kW) 1000 - 1800 7.0 10 - 140 96125958
BMPE 8.0 N MMG 45.0 VLT 5062 (45.0 kW) 1000 - 1800 8.0 10 - 140 96125959

BMPE-R
Motor Speed of rotation Max. flow Pressure
Pump type P2 Frequency converter Product number
Type
[kW] [min-1] [m3/h] [bar]

BMPE 0.6 R MG 2.2 VLT 5004 (2.2 kW) 700 - 3000 0.6 10 - 80 96126150
BMPE 1.0 R MG 4.0 VLT 5006 (4.0 kW) 700 - 3000 1.0 10 - 80 96126151
BMPE 1.8 R MG 5.5 VLT 5008 (5.5 kW) 700 - 3000 1.8 10 - 80 96126152
BMPE 2.2 R MG 7.5 VLT 5011 (7.5 kW) 700 - 3000 2.2 10 - 80 96126153
BMPE 5.1 R MMG 15.0 VLT 5022 (15.0 kW) 700 - 1800 5.1 10 - 80 96126154
BMPE 6.5 R MMG 18.5 VLT 5027 (18.5 kW) 700 - 1800 6.5 10 - 80 96126155
BMPE 7.2 R MMG 22.0 VLT 5032 (22.0 kW) 700 - 1800 7.2 10 - 80 96126156
BMPE 8.2 R MMG 22.0 VLT 5032 (22.0 kW) 700 - 1800 8.2 10 - 80 96126157
BMPE 10.2 R MMG 30.0 VLT 5042 (30.0 kW) 700 - 1800 10.2 10 - 80 96126158

13
 Product range BMP, IEC, Japan

BMP, -N, -R, IEC, Japan

3 x 200-220 D/346-380 V Y, 50 Hz
3 x 200-230 D/346-400 V Y, 60 Hz
BMP
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.2 MG 1.5 700 - 1800 0.2 10 - 100 96126080*

BMP 0.4 MG 2.2 700 - 1800 0.4 10 - 140 96126081*
BMP 0.6 MG 4.0 700 - 1800 0.6 10 - 140 96126082*
BMP 1.0 MMG 7.5 700 - 1800 1.0 10 - 160 96126083
BMP 1.2 MMG 7.5 700 - 1800 1.2 10 - 160 96126084
BMP 2.5 MMG 15 700 - 1800 2.5 10 - 160 96126085
BMP 3.2 MMG 18.5 700 - 1800 3.2 10 - 160 96126086
BMP 6.2 MMG 37.0 700 - 1800 6.2 10 - 160 96126088
BMP 7.0 MMG 45.0 700 - 1800 7.0 10 - 160 96126089
BMP 8.0 MMG 45.0 700 - 1800 8.0 10 - 160 96126090

BMP-N
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m3/h] [bar]

BMP 0.3 N MG 1.5 1000 - 3000 0.3 10 - 100 96125980*

BMP 0.6 N MG 3.0 1000 - 3000 0.6 10 - 100 96125981*
BMP 1.0 N MG 4.0 1000 - 3000 1.0 10 - 100 96125982*
BMP 1.7 N MMG 11.0 1000 - 3000 1.7 10 - 140 96125983
BMP 2.1 N MMG 15.0 1000 - 3000 2.1 10 - 140 96125984
BMP 3.4 N MMG 18.5 1000 - 2400 3.4 10 - 140 96125985
BMP 4.4 N MMG 22.0 1000 - 2400 4.4 10 - 140 96125986
BMP 6.2 N MMG 37.0 1000 - 1800 6.2 10 - 140 96125987
BMP 7.0 N MMG 37.0 1000 - 1800 7.0 10 - 140 96125988
BMP 8.0 N MMG 45.0 1000 - 1800 8.0 10 - 140 96125989

BMP-R
Motor Speed of rotation Max. flow Pressure
Pump type P2 Product number
Type
[kW] [min-1] [m 3/h] [bar]

BMP 0.6 R MG 2.2 700 - 3000 0.6 10 - 80 96126180*

BMP 1.0 R MG 4.0 700 - 3000 1.0 10 - 80 96126181*
BMP 1.8 R MG 5.5 700 - 3000 1.8 10 - 80 96126182*
BMP 2.2 R MG 7.5 700 - 3000 2.2 10 - 80 96126183*
BMP 5.1 R MMG 15.0 700 - 1800 5.1 10 - 80 96126184
BMP 6.5 R MMG 18.5 700 - 1800 6.5 10 - 80 96126185
BMP 7.2 R MMG 22.0 700 - 1800 7.2 10 - 80 96126186
BMP 8.2 R MMG 22.0 700 - 1800 8.2 10 - 80 96126187
BMP 10.2 R MMG 30.0 700 - 1800 10.2 10 - 80 96126188
* Not available for 3 x 400 V, 50 Hz. Please see “BMP, -N, -R, IEC, 50/60 Hz” on page 10 when ordering.

14
Accessories BMP

Component Description Part no.

Non-return valve PJE 1½"

• PJE 1½" to 1½"

TM02 9388 2504

• Material: Stainless steel (DIN 1.4462)
• Max. pressure: 70 bar (1000 psi) 96126210
• Rated flow: 170 l/min. (45 GPM)
• Opening pressure: 0.5 bar (8 psi)
• Pressure loss: 2 bar (30 psi)

Adapter
• PJE 1½" - GE 25 SR 96126211
• Material: Stainless steel (DIN 1.4462)
TM02 9392 2504

High-pressure hose, PJE 2" - L = 1000 mm

96126212
• Material: Stainless steel (DIN 1.4462)
TM02 9391 2504

High-pressure hose, PJE 2" - L = 500 mm

96126213
• Material: Stainless steel (DIN 1.4462)

Socket 2", short

• PJE 2" high-pressure fitting for pump (short) 96551132
• Material: Stainless steel (DIN 1.4462)
TM02 9448 2604

Socket 2", long

96551133
• PJE 2" high-pressure fitting for pump (long)

Adapter from PJE to LP hose

TM02 9387 2504

• Socket PJE 1½" to ø50 96551134

• Material: Stainless steel (DIN 1.4462)

15
 Accessories BMP

Component Description Part no.

Pressure relief valve
• Operating range: 25-140 bar/max. 1.8 m 3/h
96125890
• Material: Stainless steel (DIN 1.4301)
• Thread size: G 3/8
Pressure relief valve
• Operating range: 25-80 bar/max. 3.6 m 3/h
96125891
• Material: Stainless steel (DIN 1.4301)
• Thread size: G ½
Pressure relief valve
• Operating range: 80-140 bar/max. 3.6 m3/h
96125892
• Material: Stainless steel (DIN 1.4301)
• Thread size: G ½
Pressure relief valve
• Operating range: 25-80 bar/max. 7.2 m 3/h
96125893
• Material: Stainless steel (DIN 1.4301)
• Thread size: G ¾

TM02 9395 2504

Pressure relief valve
• Operating range: 80-140 bar/max. 7.2 m3/h
96125894
• Material: Stainless steel (DIN 1.4301)
• Thread size: G ¾

High-pressure hose, GE 12 - L = 500 mm

96126199
• Material: Stainless steel (DIN 1.4462)

High-pressure hose, GE 12- L = 1000 mm

96126200
• Material: Stainless steel (DIN 1.4462)

High-pressure hose, GE 25 - L = 500 mm

96126201
• Material: Stainless steel (DIN 1.4462)

High-pressure hose, GE 25 - L = 1000 mm

96126202
• Material: Stainless steel (DIN 1.4462)

High-pressure hose, PJE 1½" - L = 500 mm 96126203

TM02 9391 2504

High-pressure hose, PJE 1½" - L = 1000 mm 96126204

Male stud connector

96126217
• G ¼ to GE 12
Male stud connector
96126218
• G 3/8 to GE 12
Male stud connector
96126219
• G ½ to GE 12
Male stud connector
96126220
• G ¾ to GE 12
Male stud connector
96126221
• G ¼ to GE 25
TM02 9399 2504

Male stud connector

96126222
• G 1¼ to GE 25
Male stud connector:
96126223
• G 1½ to GE 25
Note: Tubes and parts for tubes of stainless steel DIN 1.4571 and DIN 1.4541 are available on request.

16
Technical data BMP, IEC

BMP, -N, -R, IEC, 50/60 Hz

Technical data for BMPE, see BMP data. Regarding VLT dimensions and weights, see table page 23.

BMP, 3 x 380-415 V, 50 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Number Net Gross
cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] of poles [kg] [kg]
BMP 0.2 1.5 2.0 3.60 4 0.75 0.2 10 - 100 31 41 0.134
BMP 0.4 2.2 3.0 4.90 4 0.78 0.4 10 - 140 36 46 0.134
BMP 0.6 4.0 5.5 8.90 4 0.78 0.6 10 - 140 50 60 0.134
BMP 1.0 7.5 10.0 15.0 4 0.84 1.0 10 - 160 82 92 0.162
BMP 1.2 7.5 10.0 15.0 4 0.84 1.2 10 - 160 82 107 0.162
BMP 2.5 15.0 20.0 29.5 4 0.84 2.5 10 - 160 117 142 0.349
BMP 3.2 18.5 25.0 36.0 4 0.84 3.2 10 - 160 146 201 0.349
BMP 6.2 37.0 50.0 70.5 4 0.84 6.2 10 - 160 261 396 0.349
BMP 7.0 45.0 60.0 84.5 4 0.86 7.0 10 - 160 321 436 0.349
BMP 8.0 45.0 60.0 84.5 4 0.86 8.0 10 - 160 361 436 0.521

BMP-N, 3 x 380-415 V, 50 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Number Net Gross
cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] of poles [kg] [kg]
BMP 0.3 N 1.5 2.0 3.15 2 0.82 0.3 10 - 100 23 33 0.134
BMP 0.6 N 2.2 3.0 4.45 2 0.89 0.6 10 - 100 29 39 0.134
BMP 1.0 N 4.0 5.5 8.0 2 0.86 1.0 10 - 100 42 52 0.134
BMP 1.7 N 11.0 15.0 21.0 2 0.86 1.7 10 - 140 103 158 0.349
BMP 2.1 N 11.0 15.0 21.0 2 0.86 2.1 10 - 140 103 158 0.349
BMP 3.4 N 15.0 20.0 29.5 4 0.84 3.4 10 - 140 125 180 0.349
BMP 4.4 N 22.0 30.0 36.0 4 0.84 4.4 10 - 140 164 219 0.349
BMP 6.2 N 37.0 50.0 70.5 4 0.84 6.2 10 - 140 337 412 0.521
BMP 7.0 N 37.0 50.0 70.5 4 0.84 7.0 10 - 140 337 412 0.521
BMP 8.0 N 45.0 60.0 84.5 4 0.86 8.0 10 - 140 377 452 0.521

BMP-R, 3 x 380-415 V, 50 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Number Net Gross
cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] of poles [kg] [kg]
BMP 0.6 R 2.2 3.0 4.45 2 0.89 0.6 10 - 80 29 39 0.134
BMP 1.0 R 3.0 4.0 6.30 2 0.85 1.0 10 - 80 30 40 0.134
BMP 1.8 R 5.5 7.5 11.2 2 0.86 1.8 10 - 80 55 65 0.162
BMP 2.2 R 5.5 7.5 11.2 2 0.86 2.2 10 - 80 55 65 0.162
BMP 5.1 R 15.0 20.0 29.5 4 0.84 5.1 10 - 80 139 194 0.349
BMP 6.5 R 18.5 25.0 36.0 4 0.84 6.5 10 - 80 168 223 0.349
BMP 7.2 R 22.0 30.0 36.0 4 0.84 7.2 10 - 80 178 233 0.521
BMP 8.2 R 22.0 30.0 36.0 4 0.84 8.2 10 - 80 178 233 0.521
BMP 10.2 R 30.0 40.0 58.5 4 0.84 10.2 10 - 80 272 347 0.521

17
 Technical data BMP, IEC

BMP, 3 x 380-480 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.2 1.5 2.0 3.30 - 2.95 4 0.86 - 0.75 0.2 10 - 100 31 41 0.134
BMP 0.4 2.2 3.0 4.60 - 4.45 4 0.89 - 0.70 0.4 10 - 140 36 46 0.134
BMP 0.6 4.0 5.5 8.20 - 7.30 4 0.86 - 0.77 0.6 10 - 140 50 60 0.134
BMP 1.0 7.5 10.0 15.0 - 12.5 4 0.86 - 0.80 1.0 10 - 160 82 92 0.162
BMP 1.2 7.5 10.0 15.0 - 12.5 4 0.86 - 0.80 1.2 10 - 160 82 107 0.162
BMP 2.5 15.0 20.0 29.0 - 24.0 4 0.86 - 0.80 2.5 10 - 160 117 142 0.349
BMP 3.2 18.5 25.0 35.5 - 29.5 4 0.86 - 0.81 3.2 10 - 160 146 201 0.349
BMP 6.2 37.0 50.0 69.0 - 58.0 4 0.87 - 0.81 6.2 10 - 160 261 396 0.349
BMP 7.0 45.0 60.0 85.0 - 68.0 4 0.86 - 0.85 7.0 10 - 160 321 436 0.349
BMP 8.0 45.0 60.0 85.0 - 68.0 4 0.86 - 0.85 8.0 10 - 160 361 436 0.521

BMP-N, 3 x 380-480 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m 3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.3 N 1.5 2.0 3.10 - 2.70 2 0.90 - 0.81 0.3 10 - 100 23 33 0.134
BMP 0.6 N 2.2 3.0 4.45 - 3.70 2 0.91 - 0.85 0.6 10 - 100 29 39 0.134
BMP 1.0 N 4.0 5.5 8.60 - 8.60 2 0.90 - 0.82 1.0 10 - 100 42 52 0.134
BMP 1.7 N 7.5 10.0 21.0 - 17.5 2 0.90 - 0.83 1.7 10 - 140 103 158 0.349
BMP 2.1 N 7.5 10.0 21.0 - 17.5 2 0.90 - 0.83 2.1 10 - 140 103 158 0.349
BMP 3.4 N 15.0 20.0 29.0 - 24.0 4 0.86 - 0.80 3.4 10 - 140 125 180 0.349
BMP 4.4 N 18.5 25.0 35.5 - 29.5 4 0.86 - 0.81 4.4 10 - 140 164 219 0.349
BMP 6.2 N 30.0 40.0 69.0 - 58.0 4 0.87 - 0.81 6.2 10 - 140 337 412 0.521
BMP 7.0 N 37.0 50.0 69.0 - 58.0 4 0.87 - 0.81 7.0 10 - 140 337 412 0.521
BMP 8.0 N 45.0 60.0 85.0 - 68.0 4 0.86 - 0.85 8.0 10 - 140 377 452 0.521

BMP-R, 3 x 380-480 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.6 R 2.2 3.0 4.45 - 3.70 2 0.91 - 0.85 0.6 10 - 80 29 39 0.134
BMP 1.0 R 3.0 4.0 6.30 - 5.10 2 0.89 - 0.81 1.0 10 - 80 30 40 0.134
BMP 1.8 R 5.5 7.5 10.8 - 9.45 2 0.90 - 0.82 1.8 10 - 80 55 65 0.162
BMP 2.2 R 5.5 7.5 10.8 - 9.45 2 0.90 - 0.82 2.2 10 - 80 55 65 0.162
BMP 5.1 R 15.0 20.0 29.0 - 24.0 4 0.86 - 0.80 5.1 10 - 80 139 194 0.349
BMP 6.5 R 18.5 25.0 35.5 - 29.5 4 0.86 - 0.81 6.5 10 - 80 168 223 0.349
BMP 7.2 R 22.0 30.0 35.5 - 29.5 4 0.86 - 0.81 7.2 10 - 80 178 233 0.521
BMP 8.2 R 22.0 30.0 35.5 - 29.5 4 0.86 - 0.81 8.2 10 - 80 178 233 0.521
BMP 10.2 R 30.0 40.0 58.0 - 47.5 4 0.86 - 0.81 10.2 10 - 80 272 347 0.521

18
Technical data BMP, cURus

BMP, -N, -R, cURus

Technical data for BMPE, see BMP data. Regarding VLT dimensions and weights, see table page 23.

BMP, 3 x 230/460 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.2 1.5 2.0 6.2 / 5.8 4 0.81 / 0.75 0.2 10 - 140 31 41 0.134
BMP 0.4 2.2 3.0 8.9 / 4.9 4 0.83 / 0.73 0.4 10 - 140 36 46 0.134
BMP 0.6 4.0 5.0 14.6 / 7.9 4 0.85 / 0.73 0.6 10 - 140 50 60 0.134
BMP 1.0 7.5 10.0 24.8 / 12.4 4 0.84 1.0 10 - 160 82 92 0.162
BMP 1.2 7.5 10.0 24.8 / 12.4 4 0.84 1.2 10 - 160 82 107 0.162
BMP 2.5 15.0 20.0 48.0 / 24.0 4 0.84 2.5 10 - 160 117 142 0.349
BMP 3.2 18.5 25.0 58.0 / 29.0 4 0.83 3.2 10 - 160 146 201 0.349
BMP 6.2 37.0 50.0 120.0 / 60.0 4 0.85 6.2 10 - 160 261 396 0.349
BMP 7.0 45.0 60.0 144.0 / 72.0 4 0.85 7.0 10 - 160 321 436 0.349
BMP 8.0 45.0 60.0 144.0 / 72.0 4 0.84 8.0 10 - 160 361 436 0.521

BMP-N, 3 x 230/460 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.3 N 1.5 2.0 5.6 / 3.0 2 0.89 / 0.74 0.3 10 - 100 23 33 0.134
BMP 0.6 N 3.0 4.0 10.6 / 6.2 2 0.90 / 0.74 0.6 10 - 100 29 39 0.134
BMP 1.0 N 4.0 5.0 13.2 / 6.9 2 0.91 / 0.86 1.0 10 - 100 42 52 0.134
BMP 1.7 N 11 10.0 34.6 / 17.3 2 0.88 1.7 10 - 140 103 158 0.349
BMP 2.1 N 15 10.0 47.0 / 23.5 2 0.84 2.1 10 - 140 103 158 0.349
BMP 3.4 N 18.5 25.0 58.0 / 29.0 4 0.83 3.4 10 - 140 125 180 0.349
BMP 4.4 N 22.0 30.0 73.0 / 36.5 4 0.84 4.4 10 - 140 164 219 0.349
BMP 6.2 N 37.0 50.0 120.0 / 60.0 4 0.85 6.2 10 - 140 337 412 0.521
BMP 7.0 N 37.0 50.0 120.0 / 60.0 4 0.85 7.0 10 - 140 337 412 0.521
BMP 8.0 N 45.0 60.0 144.0 / 72.0 4 0.85 8.0 10 - 140 377 452 0.521

BMP-R, 3 x 230/460 V, 60 Hz
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 IN Net Gross
Number of poles cos ϕ [m 3/h] [bar] [m³]
[kW] [hp] [A] [kg] [kg]
BMP 0.6 R 2.2 3.0 7.8 / 4.1 2 0.88 / 0.83 0.6 10 - 80 29 39 0.134
BMP 1.0 R 4.0 5.0 13.2 / 6.9 2 0.91 / 0.86 1.0 10 - 80 30 40 0.134
BMP 1.8 R 5.5 7.5 18.2 / 9.4 2 0.91 / 0.86 1.8 10 - 80 55 65 0.162
BMP 2.2 R 7.5 10.0 25.0 / 13.3 2 0.90 / 0.82 2.2 10 - 80 55 65 0.162
BMP 5.1 R 15.0 20.0 48.0 / 24.0 4 0.84 5.1 10 - 80 139 194 0.349
BMP 6.5 R 18.5 25.0 58.0 / 29.0 4 0.83 6.5 10 - 80 168 223 0.349
BMP 7.2 R 22.0 30.0 73.0 / 36.5 4 0.84 7.2 10 - 80 178 233 0.521
BMP 8.2 R 22.0 30.0 73.0 / 36.5 4 0.84 8.2 10 - 80 178 233 0.521
BMP 10.2 R 30.0 40.0 98.0 / 49.0 4 0.82 10.2 10 - 80 272 347 0.521

19
 Technical data BMP, IEC , Japan

BMP, -N, -R, IEC, Japan

3 x 200-220 D/346-380 V Y, 50 Hz
3 x 200-230 D/346-400 V Y, 60 Hz
BMP
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 I N (50 Hz) I N (60 Hz) Number cos ϕ Net Gross
3 [bar] [m³]
of poles [m /h]
[kW] [hp] [A] [A] 50 Hz 60 Hz [kg] [kg]
BMP 0.2 1.5 2.0 7.0 / 4.1 7.0 / 4.0 4 0.80 / 0.74 0.83 / 0.77 0.2 10 - 100 31 41 0.134
BMP 0.4 2.2 3.0 10.0 / 5.8 9.9 / 5.7 4 0.80 / 0.73 0.83 / 0.75 0.4 10 - 140 36 46 0.134
BMP 0.6 4.0 5.0 16.8 / 9.8 16.4 / 9.5 4 0.82 / 0.76 0.85 / 0.78 0.6 10 - 140 50 60 0.134
BMP 1.0 7.5 10.0 30.0 / 17.5 29.0 / 15.0 4 0.84 0.86 / 0.84 1.0 10 - 160 82 92 0.162
BMP 1.2 7.5 10.0 30.0 / 17.5 29.0 / 15.0 4 0.84 0.86 / 0.84 1.2 10 - 160 82 107 0.162
BMP 2.5 15.0 20.0 60.0 / 30.0 59.0 / 29.5 4 0.85 0.87 2.5 10 - 160 117 142 0.349
BMP 3.2 18.5 25.0 74.0 / 37.0 73.0 / 36.5 4 0.85 0.87 3.2 10 - 160 146 201 0.349
BMP 6.2 37.0 50.0 141 / 70.5 141 / 70.5 4 0.86 0.87 6.2 10 - 160 261 396 0.349
BMP 7.0 45.0 60.0 160 / 80.0 162 / 81.0 4 0.87 0.87 7.0 10 - 160 321 436 0.349
BMP 8.0 45.0 60.0 160 / 80.0 162 / 81.0 4 0.87 0.87 8.0 10 - 160 361 436 0.521

BMP-N
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 I N (50 Hz) I N (60 Hz) Number cos ϕ Net Gross
of poles [m3/h] [bar] [m³]
[kW] [hp] [A] [A] 50 Hz 60 Hz [kg] [kg]
BMP 0.3 N 1.5 2.0 6.5 / 3.8 6.25 / 3.60 2 0.85 / 0.79 0.89 / 0.82 0.3 10 - 100 23 33 0.134
BMP 0.6 N 3.0 4.0 11.8 / 6.9 11.6 / 6.70 2 0.88 / 0.82 0.90 / 0.86 0.6 10 - 100 29 39 0.134
BMP 1.0 N 4.0 5.0 15.2 / 8.8 15.0 / 8.60 2 0.90 / 0.87 0.92 / 0.88 1.0 10 - 100 42 52 0.134
BMP 1.7 N 11.0 18.5 44.0 / 22.0 41.0 / 20.5 2 0.85 0.89 1.7 10 - 140 103 158 0.349
BMP 2.1 N 15.0 20.0 59.0 / 29.5 55.0 / 27.5 2 0.85 0.9 2.1 10 - 140 103 158 0.349
BMP 3.4 N 18.5 25.0 74.0 / 37.0 73.0 / 36.5 2 0.85 0.87 3.4 10 - 140 125 180 0.349
BMP 4.4 N 22.0 30.0 87.0 / 43.5 86.0 / 43.0 4 0.85 0.87 4.4 10 - 140 164 219 0.349
BMP 6.2 N 37.0 50.0 141 / 70.5 141 / 70.5 4 0.86 0.87 6.2 10 - 140 337 412 0.521
BMP 7.0 N 37.0 50.0 141 / 70.5 141 / 70.5 4 0.86 0.87 7.0 10 - 140 337 412 0.521
BMP 8.0 N 45.0 60.0 160 / 80.0 162 / 81.0 4 0.87 0.87 8.0 10 - 140 377 452 0.521

BMP-R
Motor Max. flow Pressure Weight Shipping volume
Pump type P2 I N (50 Hz) I N (60 Hz) Number cos ϕ Net Gross
of poles [m3/h] [bar] [m³]
[kW] [hp] [A] [A] 50 Hz 60 Hz [kg] [kg]
BMP 0.6 R 2.2 3.0 9.5 / 5.2 8.9 / 5.1 2 0.87 / 0.82 0.90 / 0.85 0.6 10 - 80 29 39 0.134
BMP 1.0 R 4.0 5.0 15.2 / 8.8 15.0 / 8.6 2 0.90 / 0.87 0.92 / 0.88 1.0 10 - 80 30 40 0.134
BMP 1.8 R 5.5 7.5 21.0 / 12.0 20.6 / 11.8 2 0.89 / 0.86 0.92 / 0.88 1.8 10 - 80 55 65 0.162
BMP 2.2 R 7.5 10.0 29.0 / 16.8 27.5 / 16.0 2 0.87 / 0.81 0.92 / 0.85 2.2 10 - 80 55 65 0.162
BMP 5.1 R 15.0 20.0 60.0 / 30.0 59.0 / 29.5 4 0.85 0.87 5.1 10 - 80 139 194 0.349
BMP 6.5 R 18.5 25.0 74.0 / 37.0 73.0 / 36.5 4 0.85 0.87 6.5 10 - 80 168 223 0.349
BMP 7.2 R 22.0 30.0 87.0 / 43.5 86.0 / 43.0 4 0.85 0.87 7.2 10 - 80 178 233 0.521
BMP 8.2 R 22.0 30.0 87.0 / 43.5 86.0 / 43.0 4 0.85 0.87 8.2 10 - 80 178 233 0.521
BMP 10.2 R 30.0 40.0 118 / 59.0 118 / 59.0 4 0.85 0.86 10.2 10 - 80 272 347 0.521

20
Technical data BMP, - N, - R

Dimensions, BMP

B1 B2
C2bO C1I C2O

I O

HD
D1

C2aO
C1aI

TM02 9103 1804

Q

KxK1 A
C1bI C B

Fig. 11 Dimensional sketch of BMP pump, suction port (I) and discharge port (O) placed on the sides (side suction)

B1 B2 C1I C2O

I O

HD
D1

C2aO
C1aI

TM02 9209 2204

Q

KxK1 A
C1bI C B

Fig. 12 Dimensional sketch of BMP pump, suction port (I) and discharge port (O) placed on the front (end suction)

21
 Technical data BMP, - N, - R

Dimensions refer to the dimensional sketches on page 21.

Dimensions [mm]
Pump type K x K1 I O
B1 B2 B1 + B2 C1I C2O C1aI C2aO C1bI C2bO D1 HD A B C Q
BMP 0.2 230 281 511 55 56 73 110 122 128 180 238 140 125 56 10 ø8x15 GE 12 GE 12
BMP 0.4 230 335 565 55 56 83 120 122 128 196 255 160 140 63 25 ø10x17 GE 12 GE 12
BMP 0.6 250 372 622 55 56 95 132 142 148 225 283 190 140 70 13 ø10x19 GE 12 GE 12
BMP 1.0 304 391 695 64 65 114 153 169 172 276 330 216 178 89 18 ø10x14 GE 12 GE 12
BMP 1.2 304 391 695 64 65 114 153 169 172 276 330 216 178 89 18 ø10x14 GE 12 GE 12
BMP 2.5 419 547 966 29 32 160 160 402 402 335 410 254 254 108 15 ø12x14 GE 25 GE 25
BMP 3.2 435 602 1037 29 32 180 180 418 418 366 465 279 241 121 0 ø12x18 GE 25 GE 25
BMP 6.2 502 748 1250 40 43 225 225 488 485 463 585 256 286 149 0 ø16x16 GE 25 GE 25
BMP 7.0 502 748 1250 40 43 225 225 488 485 463 585 256 311 149 0 ø16x16 GE 25 GE 25
BMP 8.0 502 748 1250 40 43 225 225 488 485 463 585 256 311 149 0 ø16x16 GE 25 GE 25

Dimensions [mm]
Pump type K x K1 I O
B1 B2 B1 + B2 C1I C2O C1aI C2aO C1bI C2bO D1 HD A B C Q
BMP 0.3 N 230 281 511 55 56 73 110 122 128 180 238 140 100 56 10 ø8x15 GE 12 GE 12
BMP 0.6 N 250 281 531 55 56 73 110 142 148 180 238 140 125 56 10 ø8x15 GE 12 GE 12
BMP 1.0 N 250 372 622 55 56 95 132 142 148 225 283 190 140 70 13 ø10x19 GE 12 GE 12
BMP 1.7 N 364 503 867 64 65 142 181 229 232 335 410 254 210 108 15 ø12x14 GE 12 GE 12
BMP 2.1 N 364 503 867 64 65 142 181 229 232 335 410 254 210 108 15 ø12x14 GE 12 GE 12
BMP 3.4 N 398 547 945 29 32 160 160 381 381 335 410 254 254 108 15 ø12x14 GE 25 GE 25
BMP 4.4 N 414 602 1016 29 32 180 180 397 381 366 465 279 279 121 0 ø12x18 GE 25 GE 25
BMP 6.2 N 502 748 1250 40 43 225 225 488 485 463 585 356 286 149 0 ø16x16 GE 25 GE 25
BMP 7.0 N 502 748 1250 40 43 225 225 488 485 463 585 356 286 149 0 ø16x16 GE 25 GE 25
BMP 8.0 N 502 748 1250 40 43 225 225 488 485 463 585 356 311 149 0 ø16x16 GE 25 GE 25

Dimensions [mm]
Pump type K x K1 I O
B1 B2 B1 + B2 C1I C2O C1aI C2O C1bI C2bO D1 HD A B C Q
BMP 0.6 R 230 281 511 55 55 90 90 116 116 180 238 140 125 56 10 ø8x15 GE 12 GE 12
BMP 1.0 R 250 335 585 55 55 100 100 146 146 196 255 160 140 63 25 ø10x17 GE 12 GE 12
BMP 1.8 R 306 391 697 64 64 132 132 163 165 276 330 216 140 89 18 ø10x14 GE 12 GE 12
BMP 2.2 R 306 391 697 64 64 132 132 163 165 276 330 216 140 89 18 ø10x14 GE 12 GE 12
BMP 5.1 R 497* 547 1044* 42* 43* 160 335 410 254 254 108 15 ø12x14 1½" PJE 1½" PJE
BMP 6.5 R 497* 602 1099* 42* 43* 180 366 465 279 241 121 0 ø12x18 1½" PJE 1½" PJE
BMP 7.2 R 497* 602 1099* 42* 43* 180 366 465 279 279 121 0 ø12x18 1½" PJE 1½" PJE
BMP 8.2 R 497* 602 1099* 42* 43* 180 366 465 279 279 121 0 ø12x18 1½" PJE 1½" PJE
BMP 10.2 R 497* 669 1166* 42* 43* 200 405 541 318 305 133 0 ø16x16 1½" PJE 1½" PJE
* Victaulic/PJE flange connection

22
Technical data BMPE

Dimensions, BMPE
Dimensions of the BMPE pumps, see BMP dimensional sketches and tables on pages 21 and 22.

Dimensions, VLT:

View A View B

TM02 9469 2604 & TM02 9470 2604

Fig. 13 Dimensional sketch of the VLT range

Dimensions
Weight
[mm] Shipping volume
Pump type View
Net Gross [m3]
A B C a b ab/be*
[kg] [kg]
VLT 5003 (1.5 kW) 395 220 160 384 200 100 7.7 8.4 0.037
VLT 5004 (2.2 kW) 395 220 160 384 200 100 8.3 9.0 0.037
VLT 5005 (3.0 kW) 395 220 160 384 200 100 8.7 9.4 0.037
A
VLT 5006 (4.0 kW) 395 220 200 384 200 100 10.4 11.1 0.043
VLT 5008 (5.5 kW) 395 220 200 384 200 100 10.5 11.2 0.043
VLT 5011 (7.5 kW) 395 220 200 384 200 100 11.1 11.8 0.043
VLT 5016 (11.0 kW) 560 242 260 540 200 200 21.6 24.1 0.145
VLT 5022 (15.0 kW) 560 242 260 540 200 200 18.1 20.6 0.145
VLT 5027 (18.5 kW) 700 242 260 680 200 200 26.7 29.2 0.145
VLT 5032 (22.0 kW) B 700 242 260 680 200 200 28,5 31.0 0.145
VLT 5042 (30.0 kW) 800 308 296 780 270 200 40.1 43.3 0.242
VLT 5052 (37.0 kW) 800 308 296 780 270 200 42.9 46.1 0.242
VLT 5062 (45.0 kW) 800 308 296 780 270 200 41.5 45.0 0.228
* ab: Minimum space above cabinet
be: Minimum space below cabinet

23
 Being responsible is our foundation
Thinking ahead makes it possible
Innovation is the essence

L-BMP-PG-01 05/06 (US)

Subject to alterations
Lenntech
info@lenntech.com
info@lenntech.com Tel.
Tel. +31-152-610-900
+31-152-610-900
www.lenntech.com
www.lenntech.com Fax.
Fax.+31-152-616-289
+31-152-616-289
96552951 0604
GB
Subject to alterations.