Castro 456

Product Data
Castrol EDGE 5W-30 C3

Strength for Maximum Performance
Description
Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient,
without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense
pressures cause friction, which can waste up to 10% of an engine's performance.
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep
metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.
.
Application
Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends: ACEA C3, API SN/CF 5W-30 Lubricant
Castrol EDGE 5W-30 C3 is approved for use in vehicles from leading manufacturers, please refer to the product
performance section and your owners handbook.
*GM dexos2™ supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0209082
Advantages
Castrol EDGE 5W-30 C3 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine
performance from today's modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 5W-30 C3:
Transforms to be strongest when the pressure is highest, protecting your engine

Reduces power-robbing friction across engine speeds and conditions
Independently tested at the highest standards for proven performance
Recommended by world-leading car manufacturers
Protects the engine for the entire drain interval even under extreme pressure
Typical Characteristics
Name Method Units Castrol EDGE 5W-30 C3
Density @ 15C, Relative ASTM D4052 g/ml 0.8524
Viscosity, Kinematic 100C ASTM D445 mm²/s 12.1
Viscosity, CCS -30C (5W) ASTM D5293 mPa.s (cP) 5750
Page: 1/3
Name Method Units Castrol EDGE 5W-30 C3
Viscosity, Kinematic 40C ASTM D445 mm²/s 70
Viscosity Index ASTM D2270 None 173
Pour Point ASTM D97 °C -42
Flash Point, PMCC ASTM D93 °C 204
Ash, Sulphated ASTM D874 % wt 0.8
Product Performance Claims

ACEA C3
API SN/CF
GMdexos2™*
MB-Approval 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00/ 505 00/ 505 01
Page: 2/3
Concentrations Control
Health and Safety
Based on available information, this product is not expected to produce adverse effect on health when used for the
applications referred to above and the recommendations provided in the Material Safety Data Sheet (MSDS) are
followed. MSDS’s are available upon request through your sales contact office or via the Internet at www.castrol.com/
us. This product should not be used for purposes other than the applications referred to above. If disposing of used
product, take care to protect the environment; return used oil to collection center.
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60˚C, exposed
to hot sun or freezing conditions.
Castrol EDGE 5W-30 C3

28 Jun 2019
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.
Castrol (UK) Limited, PO BOX 354, Chertsey Road, Sunbury On Thames, Middlesex, TW16 9AW
www.castrol.com
Page: 3/3

Castro 456

Uploaded by

Copyright:

Available Formats

Castro 456

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Castro 456

Uploaded by

Copyright:

Available Formats

Product Data

Castrol EDGE 5W-30 C3

*GM dexos2™ supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0209082

Castrol EDGE 5W-30 C3:

Transforms to be strongest when the pressure is highest, protecting your engine

Density @ 15C, Relative ASTM D4052 g/ml 0.8524

Viscosity, Kinematic 100C ASTM D445 mm²/s 12.1

Viscosity, CCS -30C (5W) ASTM D5293 mPa.s (cP) 5750

Viscosity, Kinematic 40C ASTM D445 mm²/s 70

Viscosity Index ASTM D2270 None 173

Pour Point ASTM D97 °C -42

Flash Point, PMCC ASTM D93 °C 204

Ash, Sulphated ASTM D874 % wt 0.8

Product Performance Claims

Castrol EDGE 5W-30 C3

You might also like