Piping Class CPF PDF

Departamento: FIC
Código No.: B15-CPF-50-SP-004

Revisión : 7
Standard Specification for Pipe, Valves &
Fittings Página No.: 2 de 135
TABLE OF CONTENTS
1.0 SCOPE
2.0 CODES AND RECOMMENDATIONS
3.0 GENERAL REQUIREMENTS
4.0 MATERIALS
5.0 PIPE SUPPORTS
6.0 WELDING
7.0 INSPECTION
8.0 PRESSURE TESTING
9.0 PAINTING AND COATINGS
10.0 THERMAL INSULATION
11.0 IDENTIFICATION OF PIPING AND VALVE
La información del presente documento es propiedad exclusiva de Petroamazonas S. A. y no deberá ser usada para otros propósitos distintos a los especificados.
Departamento: FIC
Especificación para Tubería, Válvulas y Revisión : 7
Accesorios Página No.: 2 de 135
ÍNDICE
1.0 ALCANCE
2.0 CÓDIGOS Y RECOMENDACIONES
3.0 REQUERIMIENTOS GENERALES
4.0 MATERIALES
5.0 SOPORTES DE TUBERÍA
6.0 SOLDADURA
7.0 INSPECCIÓN
8.0 PRUEBA DE PRESIÓN
9.0 PINTURA Y RECUBRIMIENTO
10.0 AISLAMIENTO TÉRMICO
11.0 IDENTIFICACIÓN DE TUBERÍA Y VÁLVULAS
Departamento: FIC
Revisión : 7
1.0 SCOPE
This specification defines the minimum requirements for pipe, valves and fittings on process and
utility piping systems. This specification includes materials, fabrication, welding, inspection and
testing and shall apply to all piping installed by or prefabricated for installation by Contractor or to
Contractor’s order for use on onshore production facilities.
2.0 CODES AND RECOMMENDATIONS

2.1 Piping shall be designed, constructed and tested in accordance with the latest edition of
ASME B31.3, "Process Piping", and this specification.
2.2 The following dimensional standards shall apply during preparation of all piping drawings
for ANSI Classes 150-2500:
2.2.1 Pipe Flanges and Flanged Fittings ANSI/ASME B16.5
2.2.2 Factory-Made Wrought Buttwelding Fittings ANSI/ASME B16.9
2.2.3 Forged Steel Fittings, Socket-Welding and Threaded ANSI/ASME B16.11
2.2.4 Welded and Seamless Wrought Steel Pipe ANSI/ASME B36.10
2.2.5 Stainless Steel Pipe ANSI/ASME B36.19
2.2.6 Pipe Threads, General Purpose ANSI/ASME B1.20.1
2.2.7 Face to Face and End-to-End Dimensions of Valves ANSI/ASME B16.10
2.2.8 Valves Flanged, Threaded and Welding End ANSI/ASME B16.34
2.2.9 Orifice Flanges ANSI/ASME B16.36
2.2.10 Ferrous Pipe Plugs, Bushings and Locknuts With Pipe Threads ANSI/ASME B16.14
2.2.11 Wellhead and Christmas Tree Equipment API 6A
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas
2.2.12 API 600
Industries
Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller
2.2.13 API Std 602
for the Petroleum and Natural Gas Industries
3.0 GENERAL REQUIREMENTS

3.1 Engineering drawings, where provided, indicate the minimum line size, design working
pressure or piping class, valves required, etc.
For services of transportation crude oil and water reinjection, the engineering companies
must confirm the wall thickness with the Hydraulic Calculations of lines.
3.2 Unless otherwise specifically authorized by the PETROAMAZONAS, the materials
specified in these General Specifications shall be strictly adhered to in the design,
purchasing and the fabrication of each piping system. When the specified pipe, valves
and fittings or other materials cannot be obtained, substitution may be permitted with the
PETROAMAZONAS’s written approval.
3.3 Line marking and identification of valves shall be in accordance with Section 11.0 herein.
Contractor’s standard markings and identification may be used with
PETROAMAZONAS’s approval.
3.4 Pipe
3.4.1 Pipe wall thickness shall conform to Piping System Specifications.
3.4.2 Piping classes ANSI 150 through ANSI 2500. Piping 1 ½” NPS and smaller may
be threaded, flanged or socket welded as indicated by the Piping System
Specifications. Piping 2” NPS and larger may be threaded (Spec HA1), butt
welded or flanged as indicated by the Piping System Specifications.
Departamento: FIC
1.0 ALCANCE
Esta especificación define los requerimientos mínimos para la tubería, válvulas y accesorios
utilizada en sistemas de procesos y de utilidad. Esta especificación incluye materiales,
fabricación, soldadura, inspección y pruebas y se debe aplicar a toda la tubería instalada o
prefabricada para instalarse por el Contratista o por orden de éste para usarse en facilidades de
producción en tierra.
2.0 CÓDIGOS Y RECOMENDACIONES

2.1 La tubería debe estar diseñada, construida y probada de acuerdo a la última edición de
ASME B31.3, "Process Piping", y esta especificación.
2.2 Los siguientes estándares dimensionales se deben aplicar durante la preparación de
todos los planos de tuberías para las clases ANSI 150 – 2500:
2.2.1 Pipe Flanges and Flanged Fittings ANSI/ASME B16.5
2.2.2 Factory-Made Wrought Buttwelding Fittings ANSI/ASME B16.9
2.2.3 Forged Steel Fittings, Socket-Welding and Threaded ANSI/ASME B16.11
2.2.4 Welded and Seamless Wrought Steel Pipe ANSI/ASME B36.10
2.2.5 Stainless Steel Pipe ANSI/ASME B36.19
2.2.6 Pipe Threads, General Purpose ANSI/ASME B1.20.1
2.2.7 Face to Face and End-to-End Dimensions of Valves ANSI/ASME B16.10
2.2.8 Valves Flanged, Threaded and Welding End ANSI/ASME B16.34
2.2.9 Orifice Flanges ANSI/ASME B16.36
2.2.10 Ferrous Pipe Plugs, Bushings and Locknuts With Pipe Threads ANSI/ASME B16.14
2.2.11 Wellhead and Christmas Tree Equipment API 6A
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas
2.2.12 API 600
Industries
Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller
2.2.13 API Std 602
for the Petroleum and Natural Gas Industries
3.0 REQUERIMIENTOS GENERALES

3.1 Cuando existan planos de ingeniería, se debe indicar el tamaño mínimo de la línea,
presión de diseño o clase de tubería, válvulas requeridas, etc.
Para los servicios de transporte de petróleo y reinyección de agua, las empresas de
ingeniería deberán confirmar el espesor de pared con los Cálculos Hidráulicos de las
líneas.
3.2 Salvo que se tenga una autorización por escrito de PETROAMAZONAS, las
especificaciones de materiales indicas en esta Especificación General se deben respetar
estrictamente en el diseño, compra y fabricación de cada sistema de tuberías. Cuando la
tubería, válvulas, accesorios, u otro material especificado no se puedan obtener, se
puede permitir la sustitución de los mismos previa autorización por escrito de
PETROAMAZONAS.
3.3 La identificación de las líneas y la identificación de las válvulas debe estar de acuerdo
con la sección 11 de esta especificación. Se pueden usar estándares de identificación
del Contratista con la autorización de PETROAMAZONAS.
3.4 Tubería
3.4.1 El espesor de pared de la tubería debe estar de acuerdo con la Especificación
del Sistema de Tuberías.
3.4.2 Las clases de tubería que aplican son ANSI 150 hasta ANSI 2500. Tuberías de 1
½” NPS y menores puede ser roscadas, bridadas o soldadas (socket weld) de
acuerdo a lo indicado en la Especificación del Sistema de Tuberías. Tuberías de
2” NPS y mayores pueden ser roscadas (especificación HA1), soldadas a tope o
bridadas de acuerdo a lo indicado en la Especificación del Sistema de Tuberías.
Departamento: FIC
Revisión : 7
When socket weld piping is used, unions will be installed at accessible locations
to permit removal and replacement of all valves and equipment. With the
exception of vents, drains and sample and instrument connections, piping 1 ½”
NPS and smaller shall be socket welded and flanged for the following services:
3.4.2.1 Hydrocarbon services ANSI 1500 pressure ratings and above.
3.4.2.2 Hydrocarbon services above 250 °F.
3.4.2.3 Hydrocarbon services subject to vibration or pulsation.
3.4.3 Piping shall be located so as not to present overhead or tripping hazards.
Minimum clear headroom for overhead piping shall be 7 foot 0 inches (2.15 m).
Lines which cross shall not touch.
3.4.4 Piping systems shall be designed so that all valves and instruments can be
serviced conveniently. When this is impractical, ladders and platforms designed
in accordance with PETROAMAZONAS’s Specification B15-ECU-20-SP-009
"STRUCTURAL STEEL SKID MOUNTED ASSEMBLIES”, shall be used.
3.4.5 Emergency shutdown valves shall be accessible from deck or floor level and are
to be located in clear areas.
3.4.6 All pipe nipples ¾” NPS and smaller for other than air and utility water systems
piping shall be a minimum of Schedule 160 seamless steel pipe. "All-Thread"
nipples shall not be used. A nipple shall be defined as any section of pipe 12” or
less in length.
3.4.7 Seal welding of threaded piping shall not be permitted.
3.4.8 Temporary start-up cone or basket-type strainers (screens) shall be provided in
suction lines to mechanical equipment, including, but not necessarily limited to
pumps, compressors and mechanical meters and shall be located as close as
possible to the inlet flange. Such strainers shall have a minimum of 200% of the
line flow area with 1/8” diameter maximum size perforations. For Strainers
Specifications, see ATTACHMENT A.
3.4.9 Branch Connections
3.4.9.1 Branch connections shall be made per the Standard Branch Connection
Chart for piping systems ANSI 150 through ANSI 2500.
3.4.9.2 Couplings shall not be used for branch connections.
3.4.9.3 "Stub-in" branch connections shall not be permitted.
3.4.10 During fabrication, installation, sandblasting and painting, care shall be exercised
to keep blast sand, dirt and other foreign matter out of all piping systems prior to
assembly. Prior to acceptance by PETROAMAZONAS, the interior of piping
systems shall be thoroughly cleaned by Contractor.
3.4.11 Drain connections and valves shall be provided at all low points in lines. Also,
vent connections and valves shall be provided at all high points where gas may
be trapped. Vent, drain and instrument connections ¾” and smaller may be
installed using 3000# or 6000# threadolets, except for high temperature or other
service where sockolets are specified by the Piping System Specifications.
3.4.12 The corrosion coupons connections shall be installed using Access Fittings type
COSASCO. For Access Fittings Specifications, see ATTACHMENT B.
Departamento: FIC
Cuando se usa soldadura de boquilla (socket weld), las uniones se deben

instalar en lugares accesibles para permitir la remoción y reemplazo de todas las
válvulas y equipos. Con excepción de venteos, drenajes, toma muestras y
conexiones de instrumentos, las conexiones de tubería de 1 ½” NPS y menores
deben ser socket weld o bridadas para los siguientes servicios:
3.4.2.1 Servicio para hidrocarburos con presiones ANSI 1500 y superiores.
3.4.2.2 Servicio para hidrocarburos sobre los 250 °F.
3.4.2.3 Servicio de hidrocarburos sujeto a vibración o pulsación.
3.4.3 La tubería debe estar localizada de tal forma que no presente riesgo de golpes
sobre cabeza ni tropiezos. La mínima altura para tubería sobre cabeza es de 7
pies 0 pulgadas (2.15 m). Las líneas que se cruzan no deben tocarse.
3.4.4 Los sistemas de tubería deben estar diseñados de tal forma que todas las
válvulas e instrumentos puedan ser atendidos convenientemente. Cuando esto
no sea posible, se deben diseñar escaleras y plataformas de acuerdo con la
especificación de PETROAMAZONAS B15-ECU-20-SP-009 “STRUCTURAL
STEEL SKID MOUNTED ASSEMBLIES”.
3.4.5 Las válvulas de parada de emergencia deben estar accesibles desde las
cubiertas o desde el nivel del piso y deben estar localizadas en áreas libres.
3.4.6 Todos los niples de ¾” NPS y menores que se usen para aplicaciones que no
sean sistemas de utilidad de agua y aire deben ser de tubería de acero sin
costura cédula 160. No se deben utilizar niples de rosca completa. Se define
como un niple a una sección de tubería con una longitud de 12” o menos.
3.4.7 No se permite sellar con soldadura ninguna unión roscada.
3.4.8 Para el arranque de equipos se debe colocar filtros tipo cono o canasta
(pantallas) en las líneas de succión de los equipos, incluyendo, pero no
necesariamente limitado a bombas, compresores y medidores mecánicos y se
colocarán lo más cerca posible de la brida de succión. Estos filtros deben tener
un área mínima del 200 % del área de la línea de flujo con un tamaño de
perforación máximo de 1/8”. Para Especificaciones de Filtros, ver ANEXO A.
3.4.9 Conexión de derivaciones
3.4.9.1 Las derivaciones se deben realizar de acuerdo a la Carta Estándar de
Conexión para sistemas de tubería clase ANSI 150 hasta ANSI 2500.
3.4.9.2 No se debe utilizar acoples para conexión de derivaciones.
3.4.9.3 No se permiten conexiones tipo “Stub-in”.
3.4.10 Durante la fabricación, instalación, limpieza y pintura, se debe tener especial
cuidado para mantener la granalla, polvo u otro material extraño fuera del
sistema de tubería antes de la instalación. Antes de la aceptación del sistema por
PETROAMAZONAS, el interior de la tubería debe limpiarse completamente por
el Contratista.
3.4.11 Las conexiones y válvulas de drenaje deben colocarse en los puntos más bajos
de las líneas. Así también, las conexiones y válvulas de venteo deben colocarse
en los puntos más altos donde el gas podría quedar atrapado. Los venteos,
drenajes y conexiones de instrumentos de ¾” o menos se deben instalar usando
acoples roscados (threadolets) clase 3000# ó 6000#, excepto para servicios de
alta temperatura u otros servicios donde se especifique el uso de acoples
soldables (socketweld) por la Especificación del Sistema de Tuberías.
3.4.12 Las conexiones de cupones de corrosión se deben instalar usando accesorios de
entrada tipo COSASCO. Para Especificaciones de Accesorios de Entrada,
ver ANEXO B.
Departamento: FIC
Revisión : 7
3.4.13 Changes in pressure rating of piping systems shall be made at valves. A block
valve separating two pressure rated systems shall carry the rating of the higher
pressure system; e.g., a control valve station shall take the pressure rating
change at the outlet of the block valve down stream of the control valve.
3.4.14 Laterals (sub-headers) for instrument gas or air systems shall have block valves
at the primary header and branch off from the top of the primary header.
3.4.15 Insulating gaskets shall be installed when joining piping components or dissimilar
metals to prevent galvanic corrosion and when there are changes between
underground with cathodic protection and aboveground lines. Only will be
accepted the Insulating Kits PIKOTEK. For Insulating Kits Specifications, see
ATTACHMENT C.
3.5 Flanges
3.5.1 All flanges shall have marking the origin country, fabrication logo, material, rating,
diameter and schedule.
3.5.2 Flanges ANSI Class 900 and above shall be RTJ. Flanges ANSI Class 600 and
lower may be RF or FF, with serrated spiral finish.
3.5.3 Weld neck flanges are recommended for all flanged piping.
3.5.4 Steel flanges used to mate with equipment having cast or ductile iron flanges
shall have the faces machined flat.
3.5.5 Flange bolt holes shall straddle the piping horizontal and vertical center lines.
3.5.6 API flanges rated at 2000, 3000 or 5000 PSI shall be Type 6B. API flanges rated
at 10000, 15000 or 20000 PSI shall be Type 6BX.
3.6 Fittings
3.6.1 All fittings shall have marking the origin country, fabrication logo, material, rating,
diameter and schedule.
3.6.2 All 90° welded elbows shall be long radius, unless restricted by available space.
If short radius welded elbows are used, they shall be derated to 80% of the
calculated allowable working pressure if subject to pulsations.
3.6.3 Threaded bushings would not be used in pressure piping systems for other than
the installation of ½” NPT and smaller instruments with male end connections.
3.6.4 Eccentric reducers installed with the straight (flat) side up shall be used when line
size reductions are required for pump suction connections.
3.6.5 Unions 1” NPS and above in hydrocarbon service shall be threaded universal
union, steel-to-steel seats.
3.6.6 Street elbows shall not be used unless approved by PETROAMAZONAS.
3.6.7 Bleed rings shall be according to material of pipe, stainless steel or carbon steel.
For Bleed Rings Specifications, see ATTACHMENT D.
Departamento: FIC
3.4.13 Los cambios de clase de presiones en los sistemas de tubería deben hacerse en
las válvulas. Una válvula de bloqueo que esté separando dos secciones con
diferentes clases de presiones debe tener la clasificación del sistema de mayor
presión; ejemplo, una válvula de control de estación debe tener el cambio de
clasificación de presión a la salida de la válvula de bloqueo aguas debajo de la
válvula de control.
3.4.14 Las conexiones laterales (cabezales secundarios) para instrumentos en los
sistemas de gas y aire deben tener válvulas de bloqueo a la salida del cabezal
principal y deben salir de la parte superior del cabezal principal.
3.4.15 Los empaques de aislamiento se deben instalar cuando se unan dos
componentes de tubería o materiales diferentes, para evitar la corrosión
galvánica y cuando se den cambios entre líneas enterradas con protección
catódica y aéreas. Solo se aceptan juegos de aislamiento PIKOTEC. Para
Especificaciones de Kits de Aislamiento, ver ANEXO C.
Ejemplo: Una brida 410 SS conectada a una brida de acero al carbono.
3.5 Bridas
3.5.1 Todas las bridas deben tener marcado el país de origen, el logo del fabricante,
material, clase, diámetro y cédula.
3.5.2 Las bridas de clase 900 y mayores deben ser RTJ. Las bridas para clase 600 y
menores pueden ser RF o FF, con un terminado en un estriado espiral.
3.5.3 Bridas de cuello soldable son recomendadas para todas las tuberías bridadas.
3.5.4 Las bridas de acero utilizadas para acoplarse con equipos que tienen bridas de
hierro fundido o de hierro dúctil deben tener las caras maquinadas planas (FF).
3.5.5 Los agujeros para los pernos de las bridas deben estar encuadrados con la
tubería horizontal y con las líneas de centro verticales.
3.5.6 Las bridas API, clasificadas como 2000, 3000 o 5000 PSI deben ser del tipo 6B.
Las bridas API clasificadas como 10000, 15000 o 20000 PSI deben ser del tipo
6BX.
3.6 Accesorios
3.6.1 Todos los accesorios deben tener marcado el país de origen, logo del fabricante,
material, clase, diámetro y cédula.
3.6.2 Todos los codos de 90° soldables deben ser de radi o largo, a menos que esté
restringido por el espacio disponible. Si se utilizan codos soldables de radio
corto, se debe disminuir su clase a un 80% de la presión de trabajo calculada
permitida si está sujeta a pulsaciones.
3.6.3 Bocines roscados no deberían ser usados en sistemas de tuberías de presión
más que para la instalación de instrumentos con conectores macho de ½” NPT o
menos.
3.6.4 Las reducciones excéntricas se deben usar con el lado recto (plano) hacia arriba
cuando se requiera reducir el tamaño de la línea para las conexiones de succión
de las bombas.
3.6.5 Las uniones de 1” NPS y mayores en líneas de servicio para hidrocarburos
deben ser del tipo unión universal roscada, con asientos metal – metal.
3.6.6 Los codos con extremos macho – hembra no se deben usar sin la autorización
de PETROAMAZONAS.
3.6.7 Los anillos de purga deben ser de acuerdo al material de la tubería, acero
inoxidable o acero carbón. Para Especificaciones de Anillos de Purga, ver
ANEXO D.
Departamento: FIC
Revisión : 7
3.7 Valves
3.7.1 All the valves manufacturers (gate, globe, check and butterfly with exception of
API 6D valves) will have to apply the API RP 591: PROCESS VALVE
QUALIFICATION PROCEDURE. This recommended practice provides
recommendations for evaluation of a construction and quality assurance program
for the purpose of determining a manufacturer's capability to provide new valves
manufactured in accordance with the applicable API standards.
3.7.2 Valves shall be furnished as called out on the Approved Valve Lists. Alternate
valves which are equal to the valve list requirement may be used only after
obtaining PETROAMAZONAS’s written approval. For Approved Valve Brands,
see ATTACHMENT E.
3.7.3 All valves shall be installed in accordance with temperature and pressure ratings
recommended by manufacturer and within limits of the ANSI Code for the
applicable service. Flanges and flange facings on valves shall match that
specified by the applicable Piping Class Specification. The wall thickness of the
valves gate, globe and check shall be under API 600 and API 602.
3.7.4 All valves for hydrocarbon service shall be steel. Valves 2” and larger shall be
flanged and 1 ½” and smaller may be threaded, flanged or socket welded as
indicated by the Piping Class Specification, except for glycol systems which shall
be welded or union ended. Contractor shall not add flanges to threaded, socket
weld or butt weld connections on valves unless specifically approved. Secondary
threaded valves must be easily removable. Hard (metal to metal) seats are
required for all valves in glycol service.
3.7.5 The valves for Fire Water System shall be:
• Valves 1 ½” and smaller: Carbon Steel body and Chromed trim. Threaded
ends
• Valves 2” and larger: Carbon Steel body and Chromed trim. RF flanged
ends.
3.7.6 Ball valves shall be of fire safe design and shall meet the following additional
specifications.
3.7.6.1 Ball valves shall be trunnion mounted with secondary metal seal, as
following:
• For ANSI 150: 8” and larger
• For ANSI 300: 4” and larger
• For ANSI 600, 900, 1500 and 2500: 2” and larger.
All trunnion mounted ball valves shall be supplied with grease fittings for
stem and seals.
3.7.6.2 Secondary metal seal is not required for 1 ½” and smaller ball valves.
3.7.6.3 Manual gear operators shall be furnished on all quarter turn valves in any
application where breakaway torque requirements exceed 50 foot
pounds. Generally:
Departamento: FIC
3.7 Válvulas
3.7.1 Todos los fabricantes de válvulas (compuerta, globo, retención y mariposa, con
excepción de las válvulas API 6D) deben aplicar la recomendación API RP 591:
“PROCESS VALVE QUALIFICATION PROCEDURE. Esta recomendación
práctica provee recomendaciones para la evaluación de un programa de
construcción y aseguramiento de calidad con el propósito de determinar la
capacidad del fabricante para proveer válvulas nuevas fabricadas de acuerdo
con los estándares API aplicables.
3.7.2 Las válvulas deben ser suministradas de acuerdo a la lista de válvulas
aprobadas. Válvulas alternas que cumplen con los requerimientos de la lista de
válvulas se pueden usar solamente después de obtener la aprobación por
escrito de PETROAMAZONAS. Para las Marcas de Válvulas Aprobadas, ver
ANEXO E.
3.7.3 Todas las válvulas deben estar instaladas de acuerdo a los rangos de
temperatura y presión recomendadas por el fabricante y dentro de los límites del
código ANSI para el servicio correspondiente. Las bridas y las caras de las
bridas deben coincidir con lo especificado por la especificación de la clase de
tubería correspondiente. El espesor de pared de las válvulas de compuerta,
globo y retención debe estar bajo las especificaciones API 600 y API 602.
3.7.4 Todas las válvulas para servicio de hidrocarburos deben ser de acero. Las
válvulas de 2 ½” y mayores deben ser bridadas y las de 2” y menores pueden ser
roscadas, bridadas o soldadas (socket weld) tal como lo indica esta
especificación, excepto para los sistemas de glicol las cuales deben ser soldadas
o con uniones terminadas. El Contratista no debe aumentar bridas en las
conexiones roscadas o soldadas a menos que haya una aprobación específica.
Válvulas secundarias roscadas deben ser fácilmente removibles. Para el servicio
con glicol, se requiere que los asientos de las válvulas sean duros (metal con
metal).
3.7.5 Las válvulas del sistema contra incendios deben ser:
• Válvulas de 1 ½” y menores: Cuerpo de Acero Carbón e internos Cromados.
Extremos roscados.
• Válvulas de 2” y mayores: Cuerpo de Acero Carbón e internos Cromados.
Extremos bridados tipo RF.
3.7.6 Las válvulas de bola deben ser diseñadas a prueba de fuego y deben cumplir las
siguientes especificaciones adicionales:
3.7.6.1 Las válvulas de bola deben ser tipo montada sobre muñones con sellos
secundarios de metal, de acuerdo a lo siguiente:
• Para la clase ANSI 150: 8” y mayores.
• Para la clase ANSI 300: 4” y mayores.
• Para la clase ANSI 600, 900, 1500 y 2500: 2” y mayores.
Todas las válvulas tipo montada sobre muñones deben ser
suministradas con 2 graseros para el vástago y para los sellos.
3.7.6.2 No se requieren sellos secundarios de metal para válvulas de 1 ½” o
menores.
3.7.6.3 Se deben suministrar válvulas con volantes acoplados a sistema de
engranajes para todas las válvulas de un cuarto de vuelta en cualquier
aplicación donde el torque inicial exceda las 50 libras pie.
Generalmente:
Departamento: FIC
Revisión : 7
• 6” and larger ANSI 150 and 300

• 4” and larger ANSI 600, 900 and 1500
• 2” and larger ANSI 2500
3.7.6.4 For Hydrocarbon Process and Auxiliary Services (rain water, potable
water, etc.), ball valves 1 ½” and smaller could be ASTM-A351 Gr CF8M
or 316 SS body, with 316 SS ball and stem.
3.7.6.5 For Instruments Air, ball valves 1 ½” and smaller shall be 316 SS body,
ball and stem.
All these ball valves indicate in 3.7.7 shall have the pressure ratings as shown on
the P&ID’s or mechanical flow sheets.
3.7.7 Block valves shall be provided downstream of check valves to allow isolating the
check valve for servicing without the need to de-pressurize downstream piping
systems. Vent valves, if applicable, shall be installed to facilitate de-pressuring
piping upstream of check valve and upstream of check valve for leak testing of
check valves.
3.7.8 Check valves can be reduced or full flow, swing check in all cases except for
reciprocating pump or compressor service where ball or piston type check shall
be used or where the piping specification permits wafer type check valves in
utility services.
3.7.8.1 All check valves 2” and larger shall be furnished with bolted bonnets.
3.7.8.2 All check valves 4” and larger shall be provided with ½” NPT tap and
plug in the body.
3.7. 9 Gate, Globe and Check valves shall have hardened (stellite or equal) seats. The
check valve can have removable or integral seats. Globe valves may be straight
or angle type to suit piping configuration.
3.7.10 All gate and globe valves shall be OS&Y. Inside screw-rising stem not will be
accepted
3.7.11 Needle valves shall be supplied when shown on the flowsheets and assembly
drawings. Needle valves, except where required for high pressure and/or
temperature service, shall all be soft- seated and all 316 SS.
3.7.12 For ball valves, the ball rotation shall be counter-clockwise when facing the stem
so that the initial valve opening is at the bottom of the pipe.
4.0 MATERIALS
4.1 All materials (Pipe, Fittings, Flanges, Strainers, etc.), shall include the fabrication logo
and heat number.
4.2 When need purchase materials (Pipe, Fittings, Flanges, Gaskets, Stud Bolts and Nuts,
etc.) of nontraditional countries, should follow the “Procedure for Accept Materials of
Nontraditional Countries” by PETROAMAZONA.
Departamento: FIC
• 6” y mayores ANSI 150 y 300

• 4” y mayores ANSI 600, 900 y 1500
• 2” y mayores ANSI 2500
3.7.6.4 Para procesos con hidrocarburos y servicios auxiliares (agua de lluvia,
agua potable, etc.), las válvulas de bola de 1 ½” y menores pueden ser
con el cuerpo ASTM-A351 Gr CF8M o 316 SS, con bola y vástago de
316 SS.
3.7.6.5 Para sistemas de aire de instrumentos, las válvulas de bola de 1 ½” y
menores deben ser de 316 SS el cuerpo, la bola y el vástago.
Todas las válvulas de bola descritas en 3.7.7 deben tener los rangos de presión
de acuerdo a lo indicado en los P&ID’s o los planos mecánicos.
3.7.7 Las válvulas de bloqueo deben ser colocadas aguas abajo de las válvulas de
retención para permitir el aislamiento de éstas y poder sacarlas de servicio sin
necesidad de despresurizar el sistema que está aguas abajo. Las válvulas de
venteo, cuando aplique, deben estar instaladas para facilitar la despresurización
de la tubería aguas abajo de la válvula de retención y aguas arriba de la válvula
de retención para realizar pruebas de fuga en las mismas.
3.7.8 Las válvulas de retención pueden ser de flujo completo o flujo reducido, del tipo
clapeta en todos los casos, excepto para uso con bombas reciprocantes o
compresores donde se usan válvulas de retención de bola o de pistón o donde
las especificaciones del sistema permitan válvulas de retención tipo galleta
(wafer) en los servicios de utilidad.
3.7.8.1 Todas las válvulas de retención de 2” y mayores deben ser
suministradas con las tapas empernadas.
3.7.8.2 Todas las válvulas de retención de 4” y mayores deben tener un agujero
con tapón de ½” NPT en el cuerpo.
3.7.9 Las válvulas de compuerta, globo y retención deben tener asientos endurecidos
(con stellite o similar). Las válvulas de retención pueden tener asientos
removibles o integrales. Las válvulas de globo pueden ser del tipo recto o
angular de acuerdo a la configuración de la tubería.
3.7.10 Todas las válvulas de compuerta y globo deben ser OS&Y (tornillo y vástago
externo). No se aceptan válvulas del tipo de vástago roscado interno.
3.7.11 Las válvulas de aguja se deben suministrar de acuerdo a los planos de
fabricación y de montaje. Las válvulas de aguja, excepto cuando se requieren en
servicios de alta presión y/o alta temperatura, deben ser de 316 SS con asientos
blandos.
3.7.12 Para válvulas de bola, la rotación de la válvula debe ser en sentido de las agujas
del reloj cuando se mire el vástago de tal forma que la apertura inicial de la
válvula sea en el fondo de la tubería.
4.0 MATERIALES
4.1 Todos los materiales (Tubería, Accesorios, Bridas, Filtros, etc.) deben incluir el logo del
fabricante y el número de colada.
4.2 Cuando exista la necesidad de adquirir materiales (Tubería, Accesorios, Bridas,
Empaques, Espárragos y Tuercas, etc.) de países no tradicionales, se deberá seguir el
“Procedimiento Para Aceptar Materiales de Países no Tradicionales” de
PETROAMAZONAS.
Departamento: FIC
Revisión : 7
4.3 All materials for Pipe, Valves, Fittings, Bolts and Gaskets shall be in accordance with
Piping Class Specifications.
4.4 The quality management system requirements for the design, development, production,
installation and service of products for the petroleum industry, must be prevailed per API
Spec Q1: “Specification for Quality Programs for the Petroleum, Petrochemical and
Natural Gas”.
4.5 All Pipe, Valves, Fittings, etc., supplied by Contractor shall be new and unused, free of
mill scale, dents, cracks, laminations, pits and detrimental rust or oxidation.
4.6 PETROAMAZONAS reserves the right to inspect all Contractor supplied materials and
components, and to reject those deemed unusable for use and not conforming to these
specifications.
4.7 No pipe, valves or fittings of brass, aluminum, cast iron, malleable iron, steel-iron or semi-
steel shall be used in hydrocarbon service. Cast Bronze or Cast Iron body valves will be
used only for Fire Water Systems and Foot Valves.
4.8 Sealant for threaded piping shall be Teflon tape, except for glycol service, where Rector
Seal No. 5 shall be used. Care shall be taken to prevent extension of the tape into the
pipe. Excess tape shall be removed prior to painting.
4.9 All new pipe, flanges and fittings shall be marked with mill and material identification. All
pipes shall be accompanied with mill test reports, and flanges and fittings shall be
accompanied with mill material certifications from manufacturer.
4.10 All threaded galvanized pipe shall be painted after assembly with cold galvanizing.
4.11 All flanges shall have stamping the origin country and manufacturers logo.
4.12 The filler material for all gaskets shall be “Flexible Graphite (FG)”. For Gaskets
Specifications, see ATTACHMENT F.
5.0 PIPE SUPPORTS

5.1 Piping shall be supported as necessary to prevent sagging, mechanical stresses and
vibration. Piping shall be adequately supported on racks, stanchions or individual
standoffs.
5.2 Welding of supports directly to the pipe, except shoes using in thermal insulating pipe,
shall not be permitted unless authorized in writing by PETROAMAZONAS.
5.3 U-Bolts securing pipe to pipe supports shall be galvanized with 1/16” polyethylene sleeve,
flat washers and double nuts. A 1/8” neoprene or polyethylene pad spacer shall be placed
between the pipe support and bottom of pipe. Minimum U-bolt diameter shall be 1/4".
5.4 Piping 8” and larger and any smaller piping subject to excessive mechanical vibration or
line pressure pulsation’s (e.g., rotating equipment piping) shall be fastened to
substantially rigid pipe supports with bolted pipe clamps in lieu of U-bolts. Pipe clamp
bolts shall have double nuts.
5.5 Piping subject to expansion may be either suspended from adjustable or swivel type
hangers or supported from below. If supported from below, steel slip shoes and guides
shall be provided. Anchors and stops shall be provided to maintain movements and
forces within acceptable limits.
Departamento: FIC
4.3 Todos los materiales para Tubería, Válvulas, Accesorios, Pernos y Empaques deben
estar de acuerdo con las especificaciones del Piping Class.
4.4 El sistema de gestión de calidad requerido para el diseño, desarrollo, producción,
instalación y servicio de productos en la empresa petrolera, debe estar bajo API
especificación Q1: “Specification for Quality Programs for the Petroleum, Petrochemical
and Natural Gas”.
4.5 Toda Tubería, Válvulas, Accesorios, etc. suministrados por el Contratista deben ser
nuevos y sin uso, libres de escamas, golpes, fisuras, laminaciones, agujeros y oxidación
perjudicial.
4.6 PETROAMAZONAS se reserva el derecho a inspeccionar todos los materiales y
componentes suministrados por el Contratista, y para rechazar aquellos que considere
inservibles para su uso y no estén conformes con esta especificación.
4.7 En sistemas para servicio con hidrocarburos no se deben instalar tuberías, válvulas o
accesorios de cobre, aluminio, hierro fundido, hierro maleable, hierro acerado o semi-
acero. Válvulas con cuerpos de bronce o hierro fundido se usarán solamente para
sistemas de agua contra incendios y en válvulas de pie.
4.8 El material para sellar las roscas de la tubería debe ser cinta de teflón, excepto para
servicio con glicol, donde se debe usar Rector Seal No. 5. Se debe tener especial
cuidado en no colocar la cinta dentro del tubo. Se debe retirar el exceso de cinta antes
de pintar la tubería.
4.9 Toda tubería nueva, bridas y accesorios deben estar marcadas con la identificación del
material. Todas las tuberías deben estar acompañadas de los reportes de prueba de los
materiales y las bridas y accesorios deben tener el certificado de material del fabricante
(Mill Certificate).
4.10 Todas las roscas galvanizadas se deben pintar después del montaje, utilizando
galvanizado en frío.
4.11 Todas las bridas deben tener estampado el país de origen y el logo del fabricante.
4.12 El material de relleno de todos los empaques debe ser “Grafito Flexible (FG)”. Para
Especificaciones de Empaques, ver ANEXO F.
5.0 SOPORTES DE TUBERÍA

5.1 Se debe soportar la tubería para prevenir el pandeo, esfuerzos mecánicos y vibraciones.
La tubería debe estar adecuadamente soportada sobre racks, columnas o soportes
individuales.
5.2 No se permite soldar soportes directamente a la tubería, con excepción de las zapatas
usadas en tuberías aisladas térmicamente, a menos que se tenga la aprobación escrita
de PETROAMAZONAS.
5.3 Los pernos U para asegurar la tubería deben ser galvanizados con una camisa de
polietileno de 1/16” de espesor, arandelas planas y doble tuerca. Un espaciador de
neopreno o polietileno de 1/8” de espesor se debe colocar entre la tubería y el soporte. El
diámetro mínimo para los pernos U debe ser 1/4”.
5.4 Para tubería de 8” y mayor y para cualquier tubería menor que esté sujeta a excesiva
vibración mecánica o en líneas donde la presión es por pulsos (por ejemplo, en tuberías
de equipos rotativos), ésta debe estar firmemente ajustada a soportes de tubería rígidos
con abrazaderas empernadas en lugar de pernos U. Los pernos de las abrazaderas
deben tener doble tuerca.
5.5 La tubería que está sujeta a expansión puede estar suspendida en eslabones giratorios
tipo soportes colgantes o soportadas desde abajo. Si se las soporta desde abajo, se
deben colocar zapatas de acero deslizables y guías. Se deben colocar también anclajes
y topes para mantener los movimientos y las fuerzas dentro de límites aceptables.
Departamento: FIC
Revisión : 7
6.0 WELDING
6.1 All pipes welding shall be performed in accordance with Procedure B15-ECU-50-PR-023
“WPS APPROVED BY B15”.
6.2 Welded joints in carbon steel shall be stress relieved in accordance with ASME B31.3
when the nominal pipe wall thickness is greater than ¾”. The piping shall be brought to
temperature and cooled in accordance with ASME Section VIII, Paragraph UCS-56.
7.0 INSPECTION
Inspection of all piping shall be performed in accordance with Procedure B15-ECU-20-PR-005
“MANUFACTURE AND INSTALLATION OF PIPES UNDERGROUND AND ABOVEGROUND”. If
the inspection is performed in accordance with Contractor Specifications, these procedures shall
be submitted to PETROAMAZONAS for approval.
8.0 PRESSURE TESTING

All pressure testing of pipe shall be performed in accordance with DNH National Direction of
Hydrocarbons Regulations and Procedure B15-ECU-20-PR-007 “HYDROSTATIC TEST FOR
PROCCESS PIPE”.
9.0 PAINTING AND COATINGS

9.1 Surface preparation and painting of pipe, valves and fittings shall be performed in
accordance with PETROAMAZONAS Specification B15-ECU-20-SP-001 "ABOVE
GROUND EXTERNAL / INTERNAL COATING AND GALVANIZING”.
9.2 All flange surfaces and bolt holes, except for flange facings, shall be coated with primer
and intermediate coats prior to assembly. Pipe fittings shall not be primer coated until all
shop fabrication has been completed. Final paint coating shall be performed after piping
has been fully assembled and hydro-tested.
9.3 Surface preparation and coating for underground pipe with anticorrosive or mechanical
protection tape shall be performed in accordance with Procedure B15-ECU-20-PR-008
“COATING”.
10.0 THERMAL INSULATION

Piping shall be insulated where indicated on the AFC drawings. Insulation shall be applied as
specified in PETROAMAZONAS Specification B15-ECU-20-SP-015 "THERMAL INSULATION".
11.0 IDENTIFICATION OF PIPING AND VALVES

The following nomenclature is to be used in identifying lines and valves designated on the
mechanical flowsheets and process piping drawings.
11.1 Line Identification
11.1.1 Each line on the mechanical flowsheets and process piping drawings shall be
clearly identified to denote the pipe specification and nominal line size.
Following is an example:
Departamento: FIC
Revisión : 7
Especificación para Tubería, Válvulas y
6.0 SOLDADURA
6.1 Toda la soldadura de tubería debe realizarse de acuerdo con el Procedimiento B15-ECU-
50-PR-023 “WPS APROBADOS POR B15”.
6.2 Las juntas soldadas de acero al carbono deben ser tratadas térmicamente (alivio de
tensiones) de conformidad con ASME B31.3 cuando el espesor nominal es mayor a ¾”.
La tubería debe ser calentada y luego enfriada de acuerdo con el párrafo UCS-56 de la
sección VIII, ASME.
7.0 INSPECCIÓN
La inspección de la tubería debe realizarse de acuerdo con el Procedimiento B15-ECU-20-PR-
005 “FABRICACIÓN E INSTALACIÓN DE TUBERÍA ENTERRADA Y NO ENTERRADA”. Si se
usan las especificaciones del Contratista, estas deben presentarse a PETROAMAZONAS para
su aprobación.
8.0 PRUEBAS DE PRESIÓN

Todas las pruebas de presión a tuberías deben ser realizadas de acuerdo con la DNH
Regulaciones de la Dirección Nacional de Hidrocarburos y el Procedimiento B15-ECU-20-PR-
007 “PRUEBAS HIDROSTÁTICAS EN LA TUBERÍA DE PROCESO”
9.0 PINTURA Y RECUBRIMIENTOS

9.1 La preparación de la superficie y pintura de la tubería, válvulas y accesorios debe ser
realizada de acuerdo a la especificación de PETROAMAZONAS B15-ECU-20-SP-001
"REVESTIMIENTO Y GALVANIZADO NO ENTERRADO EXTERNO E INTERNO”.
9.2 Toda la superficie de las bridas y de los agujeros para los pernos, excepto las caras de
las bridas, deben estar recubiertas con primer y con la capa intermedia antes del
montaje. Los accesorios de la tubería no deben ser pintados con el primer hasta que se
haya terminado la prefabricación en el taller. La capa final de la pintura debe aplicarse
una vez que el sistema de tuberías haya sido totalmente ensamblado y probado
hidrostáticamente.
9.3 La preparación de la superficie y recubrimiento de la tubería enterrada con cinta
anticorrosiva o de protección mecánica debe ser realizada de acuerdo con el
Procedimiento B15-ECU-20-PR-008 “REVESTIMIENTO”.
10.0 AISLAMIENTO TÉRMICO

La tubería debe tener aislamiento térmico donde indiquen los planos AFC (aprobados para
construcción). El aislamiento se debe aplicar de acuerdo a lo indicado en la especificación de
PETROAMAZONAS B15-ECU-20-SP-015: "AISLAMIENTO TÉRMICO".
11.0 IDENTIFICACIÓN DE VÁLVULAS Y TUBERÍA

La siguiente es la nomenclatura que se utilizará en la identificación de líneas y válvulas
diseñadas en los planos mecánicos y en los diagramas de proceso de tubería:
11.1 Identificación de líneas
11.1.1 Cada línea en los planos mecánicos y en los diagramas de proceso de tubería
debe estar claramente identificada indicando la especificación de la tubería y el
tamaño nominal de la línea.
A continuación se tiene un ejemplo:
Departamento: FIC
Código No.: B15-CPF-50-SP-004-
Revisión : 7
3” - GF - 1500 - AA1 - 00 Special (if required)

Piping Specification
Line Number
Service Identification Letters
Nominal Pipe Size
The letters used to identify the specifications are according to the following chart:
A A 1
RATING MATERIAL CS SPECS SS SPECS
A 150 A CS 1 Without C.A. 1 304 SS
B 300 L CS Low Temp. 2 1/8” C.A. 2 316 SS
C 600 S SS 3 1/16” C.A. 3 Duplex
D 900 X CS Int. Coated
E 1500 Y CS Underground
F 2500
11.1.2 Line Service

Each line will be denoted by the following abbreviations: See Table 1
11.2 Valve Identification System
Each valve on the mechanical flowsheets and piping drawings will be identified as shown
below to denote its valve size, piping specification, valve type, valve facing, valve material
and special valve type. Each valves identification shall be die stamped and/or a stainless
steel tag that shall be secured to the valve with a heave gauge steel wire. Such tags shall
remain in place upon completion of fabrication.
4” AA1 2 R F
Special valve type (if required)
Valve facing
Valve type
Pipe Specification
Valve size
Departamento: FIC
Revisión : 7
3” - GF - 1500 - AA1 - 00 Especial (si se requiere)

Especificación de la tubería
Número de línea
Letras de identificación del servicio
Tamaño nominal de la tubería
Las letras usadas para identificar las especificaciones, están de acuerdo a la siguiente
tabla:
A A 1
CLASE MATERIAL ESPECIFICACIÓN CS ESPECIFICACIÓN SS
A 150 A Acero Carbono 1 Sin C.A. 1 304 SS
B 300 L AC Baja Temp. 2 1/8” C.A. 2 316 SS
C 600 S Acero Inoxidable 3 1/16” C.A. 3 Duplex
D 900 X AC Recubierto Int.
E 1500 Y AC Enterrado
F 2500
11.1.2 Servicio de la línea

Cada línea debe estar indicada con las siguientes abreviaciones: Ver Tabla 1
11.2 Sistema de identificación de válvulas
Cada válvula en los planos mecánicos y en los diagramas de proceso de tubería debe
estar identificada tal como se muestra a continuación para indicar el tamaño,
especificación, tipo de válvula, caras de la válvula, material de la válvula y tipo especial
de válvula. Cada válvula debe tener la especificación estampada y/o una etiqueta de
acero inoxidable asegurada a la válvula mediante un alambre de acero calibrado. Esta
etiqueta debe permanecer en su lugar hasta completar la fabricación.
4” AA1 2 R F
Tipo especial de válvula (si se requiere)
Caras de la válvula
Tipo de válvula
Especificación de la tubería
Tamaño de la válvula
Departamento: FIC
Revisión : 7
TABLE 1 / TABLA 1
Service Abbreviation SPEC

Air Instrument AI HA1
Air Utility AU HA1
Blow Down (Low Temp to –50 ºF) BD1 AL1
Condensate C AA1, CA1
Drain Gravity DRG AA1, AY1
Drain Overflow DO AA1, AY1
Drain Pressure DRP AA1, AY1
Foam F AA1
Gas G AA1, BA1, CA1
Gas Diesel GD AA1
Gas Fuel GF AA1, BA1, CA1
Gas Fuel (Hot or Dry Service) GF1 FA1
Gas Fuel (Wet or Condensing Service) GF2 FS1
Gas Liquefied Propane GLP AA1
Gas Process GP AA1, AS1, AS2, BA1, BS1, BS2,
CA1, CS1, CS2, DA1, DS1, DS3,
EA1, ES1, ES3
Gasoline GAS AA1
Heat Media HM AA1
Oil Dry OD AA1
Oil Fuel Return OFR AA1
Oil Hot Return OHR AA1
Oil Hot Supply OHS AA1
Oil LACT OL AA1, CA1
Oil Produced OP AA1, AX1, BA1, BX1, CX1
Oil Reject OR AA1
Oil Wet OW AA1
Process Liquids (Chemical Injection) PL AS2, BS2, CS2
Vapor V CA1
Water Fireline WFL AA1
Water Fresh WF HA1
Water Hot Return WHR AA1
Water Produced WP AA1, AX1, BA1, BX1, CX1, EA1
Water Raw WR AA1
Water Soft WS AA1
Water Utility WU HA1
Water Waste WW AA1
Departamento: FIC
Revisión : 7
11.2.1 Description
TYPE FACING SPECIAL VALVE TYPE

If required
1 Gate F Flat face - Standard
2 Ball G Clamp connector B Double block and bleed
3 Plug J Ring joint F Full port
4 Globe R Raised face FM FM x FM
5 Check S Threaded H High temperature
6 Needle U Union L Lug
7 Butterfly V Victaulic LT Low temperature
8 Foot W Butt weld P Piston
9 Gauge, Multiport X Special S Short pattern
0 Choke (900# - 1500#) Y SW x SCR SG Slab Gate
Z Socket weld (SW) W Wafer
X Special
STANDARD BRANCH CONNECTION CHART
[INCHES]
BRANCH
24 20 18 16 14 12 10 8 6 4 3 2 1.5 1 .75 .5
24 T RT RT RT RT RT W W W W W W S S S S
20 T RT RT RT RT RT W W W W W S S S S
18 T RT RT RT RT W W W W W S S S S
16 T RT RT RT RT W W W W S S S S
14 T RT RT RT W W W W S S S S
12 T RT RT RT W W W S S S S
R 10 T RT RT W W W S S S S
U 8 T RT RT W W S S S S
N 6 T RT RT W S S S S
4 T RT RT S S S S
3 T RT S S S S
2 T T/S S S S
1.5 SWT SW RT SW RT SW RT
1 SWT SW RT SW RT
.75 SWT SW RT
.5 SWT
LEGEND
T Butt Weld Tee

RT Butt Weld Red Tee
S Sockolet (SOL) / Threadolet (TOL)
W Weldolet (WOL)
T/S Butt Weld Tee with threaded branch
SWT Socket Weld Tee / Threaded Tee
SW RT Socket Weld Reducing Tee / Threaded Reducing Tee
Departamento: FIC
Revisión : 7
11.2.1 Descripción
TIPO EXTREMOS VÁLVULA ESPECIAL

Si es requerido
1 Compuerta F Cara plana - Estándar
2 Bola G Conector Clamp B Doble bloqueo y purga
3 Tapón J Junta de anillo F Paso completo
4 Globo R Cara resaltada FM Hembra x Hembra
5 Retención S Roscada H Alta temperatura
6 Aguja U Unión L Oreja
7 Mariposa V Vitaúlica LT Baja temperatura
8 Pie W Soldada a tope P Pistón
9 Calibración X Especial S Modelo corto
0 Estranguladora (900# - 1500#) Y Enchufe x roscado SG Compuerta plana
Z Enchufe W Galleta
X Especial
TABLA DE CONEXIONES PARA DERIVACIONES
[PULGADAS]
DERIVACIÓN
24 20 18 16 14 12 10 8 6 4 3 2 1.5 1 .75 .5
24 T RT RT RT RT RT W W W W W W S S S S
20 T RT RT RT RT RT W W W W W S S S S
18 T RT RT RT RT W W W W W S S S S
16 T RT RT RT RT W W W W S S S S
P 14 T RT RT RT W W W W S S S S
R 12 T RT RT RT W W W S S S S
I
10 T RT RT W W W S S S S
N
8 T RT RT W W S S S S
C
6 T RT RT W S S S S
I
P 4 T RT RT S S S S
A 3 T RT S S S S
L 2 T T/S S S S
1.5 SWT SW RT SW RT SW RT
1 SWT SW RT SW RT
.75 SWT SW RT
.5 SWT
LEYENDA
T Tee soldable a tope

RT Tee con reducción soldable a tope
S Sockolets (SOL) / Threadolet (TOL)
W Weldolet (WOL)
T/S Tee soldable con derivación roscada
SWT Tee soldable “Socket Weld” / Tee roscada
SW RT Tee soldable “Socket Weld” con reducción / Tee roscada con reducción
Departamento: FIC
Revisión : 7
PIPING MATERIAL PIPING

ANSI RATING SERVICE IDENTIFICATION
SPEC TYPE CODE
C, DO, DRG, DRP, F, G, GAS, GD, GF, GLP, GP,
AA1 ANSI 150 RF HM, OD, OFR, OHR, OHS, OL, OP, OR, OW, CS ASME B31.3
WFL, WHR, WP, WR, WS, WW
AL1 ANSI 150 RF BD1 CS ASME B31.3
AS1 ANSI 150 RF GP 304 SS ASME B31.3
AS2 ANSI 150 RF GP, PL 316 SS ASME B31.3
AX1 ANSI 150 RF OP, WP CS Int Coated ASME B31.3
AY1 ANSI 150 RF DO, DRG, DRP CS (UG) ASME B31.3
BA1 ANSI 300 RF G, GF, GP, OP, WP CS ASME B31.3
BL1 ANSI 300 RF BD1 CS ASME B31.3
BS1 ANSI 300 RF GP 304 SS ASME B31.3
BS2 ANSI 300 RF GP, PL 316 SS ASME B31.3
BX1 ANSI 300 RF OP, WP CS Int Coated ASME B31.3
CA1 ANSI 600 RF C, G, GF, GP, OL, V CS ASME B31.3
CS1 ANSI 600 RF GP 304 SS ASME B31.3
CS2 ANSI 600 RF GP, PL 316 SS ASME B31.3
CX1 ANSI 600 RF OP, WP CS Int Coated ASME B31.3
DA1 ANSI 900 RTJ GP CS ASME B31.3
DS1 ANSI 900 RTJ GP 304 SS ASME B31.3
DS3 ANSI 900 RTJ GP Duplex SS ASME B31.3
EA1 ANSI 1500 RTJ GP, WP CS ASME B31.3
ES1 ANSI 1500 RTJ GP 304 SS ASME B31.3
ES3 ANSI 1500 RTJ GP Duplex SS ASME B31.3
EX1 ANSI 1500 RTJ OP, WP CS Int Coated ASME B31.3
FA1 ANSI 2500 RTJ GF1 CS ASME B31.3
FS1 ANSI 2500 HUB GF2 304 SS ASME B31.3
HA1 ANSI 150 RF AI, AU, WF, WU CS ASME B31.3
Departamento: FIC
Standard Specification for Pipe, Valves & Fittings Revisión : 7
Piping Specification “AA1” Página No.: 14 de 135
CLASS: ANSI 150# SERVICE: C, DO, DRG, DRP, F, G, GAS, GD, GF, GLP, GP, HM, OD, OFR, OHR, OHS,
CS, RF OL, OP, OR, OW, WFL, WHR, WP, WR, WS, WW
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24
SCH 160 SCH 80 SCH STD
PIPE THD/PE BE, SMLS
ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B
Flange Bore to Match Pipe Wall
FLANGES 150# RF, THD/SW 150# RF/FF, WN
ASTM-A105
3000# FS Wall Thickness to Match Pipe
FITTINGS SW/THD BW
ASTM-A105 ASTM-A234 GR WPB
GATE CA1-1S, CA1-1Z AA1-1R
BALL CA1-2S, CA1-2Z AA1-2R
PLUG N/A
GLOBE CA1-4S, CA1-4Z AA1-4R
VALVES
CHECK CA1-5S, CA1-5Z AA1-5R

DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A AA1-7RL, AA1-7RW
FOOT N/A AA1-8F
GAUGE DA1-9S N/A
BOLTING Bolts: ASTM-A193 GR B7, Fluorocarbon Coated
(Note 4) Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR or Garlock PRESS./TEMP. RATINGS
GASKETS Style RW) °F PSIG
150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder REF. ANSI/ASME B16.5
(Flexitallic, Lamons or Garlock)
NOTES: -20/100 285
1. Plugs shall be round head 200 260
2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 300 230
3. Glycol piping shall be SW, except vent, drain, sample and instrument service 400 200
4. For Bolts dimensions, see ATTACHMENT G 500 170
5. For ANSI Pipe Schedules, see ATTACHMENT H
Departamento: FIC
ACCEPTABLE
TYPE SYMBOL SIZE DESCRIPTION
BRANDS
GATE CA1-1S 1 ½” and Class 800# (2000# CWP), CS body and Bonney Forge
Smaller bonnet, (ASTM-A105), threaded ends DSI
per ANSI/ASME B1.20.1, OS&Y, Trim 8, Newco
bolted bonnet, solid wedge gate, HF Smith
stellited seats. Hand wheel operated. Velan
WT per API 600/602. Test per API 598 Vogt
CA1-1Z 1 ½” and Class 800# (2000# CWP), CS body and

Smaller bonnet, (ASTM-A105), socket weld ends
per ANSI/ASME B16.11, OS&Y, Trim 8,
bolted bonnet, solid wedge gate, and HF
stellited seats. Hand wheel operated.
WT per API 600/602. Test per API 598
AA1-1R 2” – 4” 150# ANSI, CS body and bonnet Bonney Forge

(ASTM-A216 Gr WCB or ASTM-A105), Crane
RF flanged ends per ANSI/ASME B16.5, DSI
OS&Y, bolted bonnet, flexible wedge Newco
gate, Trim 8 and HF stellited seats. Velan
Hand wheel operated. WT per API Vogt
600/602. Test per API 598 Walworth
AA1-1R 6” and Larger 150# ANSI, CS body and bonnet

(ASTM-A216 Gr WCB or ASTM-A105),
RF flanged ends per ANSI/ASME B16.5,
OS&Y, bolted bonnet, flexible wedge
gate, Trim 8 and HF stellited seats.
Gear operated. WT per API 600/602.
Test per API 598
BALL CA1-2S 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP

Smaller CF8M or ASTM A-182 Gr 316 SS body, Apollo
316 SS ball and stem, threaded ends KF
per ANSI/ASME B1.20.1, reduced port, Nibco
lever operated, filled teflon seats. Fire Nutron
safe. Test per API 598 PBV
Quadrant
CA1-2Z 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr WKM
Smaller CF8M or ASTM A-182 Gr 316 SS body,
316 SS ball and stem, socket weld ends
per ANSI/ASME B16.11, reduced port,
lever operated, filled teflon seats. Fire
safe. Test per API 598
CA1-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr

316 SS ball and stem, threaded ends
per ANSI/ASME B1.20.1, full port, lever
operated, filled teflon seats. Fire safe.
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL CA1-2ZF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP
316 SS ball and stem, socket weld ends KF
per ANSI/ASME B16.11, full port, lever Nibco
operated, filled teflon seats. Fire safe. Nutron
Test per API 598 PBV
Quadrant
WKM
AA1-2R 2” – 6” 150# ANSI, CS body (ASTM-A216 Gr AOP

WCB or ASTM-A105), RF flanged ends Cameron
per ANSI/ASME B16.5, reduced port, Grove
lever or gear (6”) operated, CS ENP ball KF
and stem. Floating ball. Fire safe. Test Nibco
per API 598 Nutron
PBV
AA1-2RF 2” – 6” 150# ANSI, CS body (ASTM-A216 Gr Quadrant
WCB or ASTM-A105), RF flanged ends TK
per ANSI/ASME B16.5, full port, lever or WKM
gear (6”) operated, CS ENP ball and
stem. Floating ball. Fire safe. Test per
API 598
AA1-2R 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

WCB or ASTM-A105), RF flanged ends
and gear operated, CS ENP ball and
stem. Trunnion mounted, double block
and bleed and sealant injection fittings.
Fire safe. Test per API 598
AA1-2RF 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

per ANSI/ASME B16.5, full port, and
gear operated, CS ENP ball and stem.
Trunnion mounted, double block and
bleed and sealant injection fittings. Fire
GLOBE CA1-4S 1 ½” and Class 800# (2000# CWP), CS body and Bonney Forge
Smaller bonnet (ASTM-A105), threaded ends DSI
per ANSI/ASME B1.20.1, OS&Y, Trim Newco
8, bolted bonnet, HF stellited seats. Smith
Hand wheel operated. WT per API Velan
600/602. Test per API 598 Vogt

Smaller bonnet (ASTM-A105), socket weld ends
bolted bonnet, HF stellited seats. Hand
wheel operated. WT per API 600/602.
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE AA1-4R 2” and Larger 150# ANSI, CS body and bonnet Crane
(ASTM-A216 Gr WCB or ASTM-A105), DSI
RF flanged ends per ANSI/ASME Newco
B16.5, OS&Y, bolted bonnet, Trim 8 Powell
and HF stellited seats. Hand wheel Velan
operated. WT per API 600/602. Test per Walworth
API 598
CHECK CA1-5S 1 ½” and Class 800# (2000# CWP), CS body AOP

Smaller (ASTM-A105), steel plate cover, Bonney Forge
threaded ends per ANSI/ASME DSI
B1.20.1, horizontal swing, screwed or KF Eagle
bolted cover, Trim 8. WT per API Newco
600/602. Test per API 598 Tom Wheatley
Velan
CA1-5Z 1 ½” and Class 800# (2000# CWP), CS body Vogt
Smaller (ASTM-A105), steel plate cover, socket Wheatley
weld ends per ANSI/ASME B16.11,
horizontal swing, screwed or bolted
cover, Trim 8. WT per API 600/602.
Test per API 598
AA1-5R 2” - 3” 150# ANSI, CS body and cover (ASTM- AOP

A216 Gr WCB or ASTM-A105), RF Crane
flanged ends per ANSI/ASME B16.5, DSI
horizontal swing, bolted cover, Trim 8, KF Eagle
HF stellited seats. WT per API 600/602. Newco
Tom Wheatley
AA1-5R 4” and Larger 150# ANSI, CS body and cover (ASTM- Velan
A216 Gr WCB or ASTM-A105), RF Walworth
flanged ends per ANSI/ASME B16.5, Wheatley
horizontal swing, bolted cover, Trim 8,
HF stellited seats. Body drain ½” NPT.
NEEDLE DA1-6S 1” and Smaller 6000 PSI @ 200 °F, bar stock body AGCO
(316 SS), M x FM threaded ends, teflon AOP
stem seat, soft or hard seats Apollo
KF
DA1-6SFM 1” and Smaller 6000 PSI @ 200 °F, bar stock body Swagelok
(316 SS), FM x FM threaded ends,
teflon stem seat, soft or hard seats
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY AA1-7RL 2” and Larger 200 PSI, CS body, lug to mate with RF Bray
flanges, according to API 609, SS stem, Center Line
bronze or iron disc, buna seat. Latch Demco
locking lever or gear (6” and larger) Flowseal
operated. Test per API 598 Keystone
KF
AA1-7RW 2” and Larger 200 PSI, CS body, wafer to mate with Norris
RF flanges, according to API 609, SS Quadrant
stem, bronze or iron disc, buna seat.
Latch locking lever or gear (6” and
larger) operated. Test per API 598
FULL FLOW AA1-8F 2” and Larger Class 125, Cast Iron body (ASTM-A126 APCO
FOOT GR B), FF flanged ends, bronze Flomatic
internals, SS strainer
GAUGE DA1-9S ¾” and Smaller 6000 PSI @ 200 °F, bar stock body AGCO
(316 SS), one male and three female, AOP
needle port, teflon stem seat, soft seat Swagelok
material, complete with bleeder valve
and 316 SS hex plug
Departamento: FIC
Piping Specification “AL1” Página No.: 19 de 135
CLASS: ANSI 150#

SERVICE: BD1
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 10 3 12 16 4 20 6
24 8
PIPE THD/PE, SMLS BE, SMLS
ASTM-A333 GR 6 (Note 3)
FLANGES 150# RF, THD/SW 150# RF, WN
ASTM-A350 GR LF2
FITTINGS SW/THD BW
ASTM-A350 GR LF2 ASTM-A420 GR WPL6
GATE BL1-1SLT AL1-1RLT
BALL BL1-2SLT AL1-2RLT
PLUG N/A
VALVES
GLOBE BL1-4SLT AL1-4RLT N/A

AL1-5RLT AL1-5RLT, AL1-5RPLT
CHECK N/A AL1-5RLT, AL1-5RWLT
AL1-5RPLT AL1-5RWLT
NEEDLE BL1-6SLT N/A
BUTTERFLY N/A AL1-7RLLT, AL1-7RWLT
GAUGE BL1-9SLT N/A
BOLTING Bolts: ASTM-A320 GR L7, Fluorocarbon Coated
(Note 5) Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts
150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite PRESS./TEMP. RATINGS
GASKETS (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR or Garlock °F PSIG
Style RW) REF. ANSI/ASME B16.5
NOTES: -50/100 285
2. Glycol piping shall be SW only, except vent, drain, sample and instrument service 300 230
3. MTRs and CTRs for low temperature material and certification tests are required per 400 200
ASME B31.3 500 170
4. For Bolts dimensions, see ATTACHMENT G
Departamento: FIC
ACCEPTABLE
BRANDS
GATE BL1-1SLT ¾” and Smaller Class 800# (2000 PSI @ 100 °F), FS Bonney Forge
body (ASTM-A350 Gr LF2), threaded DSI
ends per ANSI/ASME B1.20.1, bolted Newco
body construction, OS&Y, solid wedge, Smith
Trim 12, HF stellited seats, grafoil Velan
packing. Hand wheel operated. WT per Vogt
API 600/602. Test per API 598
AL1-1RLT 1” – 4” 150# ANSI, CS body (ASTM-A352 Gr Bonney Forge

LCC), RF flanged ends per ANSI/ASME Crane
B16.5, bolted bonnet, OS&Y, solid or DSI
flexible (2” and larger) wedge disc, Trim Newco
12, grafoil packing. Hand wheel Velan
operated. WT per API 600/602. Test Vogt
per API 598 Walworth
AL1-1RLT 6” and Larger 150# ANSI, CS body (ASTM-A352 Gr

LCC), RF flanged ends per ANSI/ASME
B16.5, bolted bonnet, OS&Y, solid or
flexible (2” and larger) wedge disc, Trim
12, grafoil packing. Gear operated. WT
per API 600/602. Test per API 598
BALL BL1-2SLT ¾” and Smaller 1500# WOG, forged CS body (ASTM- AOP
A350 Gr LF2), threaded ends per KF
ANSI/ASME B1.20.1, 316 SS ball and Nibco
stem, lever operated, filled TFE seats, Nutron
reduced port. Fire safe per API 607. PBV
Test per API 598 WKM
BL1-2SFLT ¾” and Smaller 1500# WOG, forged CS body (ASTM-

A350 Gr LF2), threaded ends per
ANSI/ASME B1.20.1, 316 SS ball and
stem, lever operated, filled TFE seats,
full port. Fire safe per API 607. Test per
API 598
AL1-2RLT 1” - 6” 150# ANSI, CS body (ASTM-A352 Gr AOP

LCC), RF flanged ends per ANSI/ASME Cameron
B16.5, top or end entry construction, Grove
Fire safe seat, CS ENP ball and stem, KF
reduced port, lever or gear (6”) Nibco
operated. Floating ball. Fire safe per Nutron
API 607. Test per API 598 PBV
Quadrant
AL1-2RFLT 1” - 6” 150# ANSI, CS body (ASTM-A352 Gr TK
LCC), RF flanged ends per ANSI/ASME WKM
B16.5, top or end entry construction,
Fire safe seat, CS ENP ball and stem,
full port, lever or gear (6”) operated.
Floating ball. Fire safe per API 607.
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL AL1-2RLT 8” - 10” 150# ANSI, CS body (ASTM-A352 Gr AOP
Fire safe seat, CS ENP ball and stem, GWC (Trunnion)
reduced port, gear operated. Trunnion KF
mounted, double block and bleed and Nibco
sealant injection fittings. Fire safe per Nutron
API 6FA. Test per API 598 PBV
Quadrant
AL1-2RFLT 8” - 10” 150# ANSI, CS body (ASTM-A352 Gr TK
full port, gear operated. Trunnion
mounted, double block and bleed and
sealant injection fittings. Fire safe per
API 6FA. Test per API 598
AL1-2RLT 12” and Larger 150# ANSI, CS body (ASTM-A352 Gr

Fire safe seat, CS ENP ball, 17-4 PH
SS stem, reduced port, gear operated.
safe per API 6FA. Test per API 598
AL1-2RFLT 12” and Larger 150# ANSI, CS body (ASTM-A352 Gr

SS stem, full port, gear operated.
GLOBE BL1-4SLT 1 ½” and Class 800# (2000# CWP), CS body and Bonney Forge
Smaller bonnet (ASTM-A350 Gr LF2), threaded DSI
ends per ANSI/ASME B1.20.1, OS&Y, Newco
Trim 12, bolted bonnet, HF stellited Smith
seats. Hand wheel operated. WT per Velan
API 600/602. Test per API 598 Vogt
AL1-4RLT 2” - 8” 150# ANSI, CS body (ASTM-A352 Gr Crane

LCC), RF flanged ends per ANSI/ASME DSI
B16.5, bolted bonnet, OS&Y, Trim 12, Newco
grafoil packing. Hand wheel operated. Powell
WT per API 600/602. Test per API 598 Velan
Walworth
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK AL1-5RLT 1” - 3” 150# ANSI, CS body (ASTM-A352 Gr AOP
B16.5, swing check, bolted bonnet, Trim DSI
12, hard or soft seals, horizontal or KF Eagle
vertical service, Fire safe bonnet. WT Newco
per API 600/602. Test per API 598 PBV
Tom Wheatley
AL1-5RLT 4” and Larger 150# ANSI, CS body (ASTM-A352 Gr Velan
LCC), RF flanged ends per ANSI/ASME Walworth
B16.5, swing check, bolted bonnet, Trim Wheatley
12, hard or soft seals, horizontal or
vertical service, Fire safe bonnet. Body
drain ½” NPT. WT per API 600/602.
Test per API 598
AL1-5RPLT 1” - 1 ½” 150# ANSI, forged CS body (ASTM-350 Bonney Forge

Gr LF2), RF flanged ends per DSI
ANSI/ASME B16.5, threaded or bolted Smith
bonnet, 316 SS piston and spring, Vogt
integral 13% chrome to hard faced seat.
Test per API 598
AL1-5RPLT 2” - 8” 150# ANSI, CS body (ASTM-A352 Gr KF Eagle

LCC), RF flanged ends per ANSI/ASME Norriseal
B16.5, bolted bonnet, 316 SS piston Tom Wheatley
and spring, soft seals. Fire safe bonnet.
Test per API 598
AL1-5RWLT 2” - 24” 150# ANSI, CS body and cover (ASTM- Crane

A352 Gr LCC), wafer body design or full KF Eagle
threaded lugged body, 316 SS disc and Tom Wheatley
springs, soft seat. Test per API 598 Wheatley
NEEDLE BL1-6SLT 1” and 6000# CWP, bar stock body (316 SS), AGCO
Smaller M x FM threaded ends, teflon packing, AOP
soft or hard seat material, low Apollo
temperature “arctic” lube KF
Swagelok
BUTTERFLY AL1-7RLLT 3” and Larger 150# ANSI, high performance type, low Keystone
temp carbon steel body (-50 °F design), Posi-Seal
RF, full lug type, according to API 609, WKM
316 SS disc, 17-4 PH shaft, reinforced
teflon seal, graphite packing, Fire safe
design. Hand wheel or gear (6” and
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY AL1-7RWLT 3” and Larger 150# ANSI, high performance type, low Keystone
RF, wafer type, according to API 609, WKM
GAUGE BL1-9SLT 3/4” and 6000# CWP, bar stock body (316 SS), AGCO
Smaller one male and three female, needle port, AOP
teflon packing, delrin seat material, Swagelok
complete with bleeder valve and 316
SS hex plug, low temperature “arctic”
lube
Departamento: FIC
Piping Specification “AS1” Página No.: 24 de 135
CLASS: ANSI 150#

SERVICE: GP
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
SCH 80S SCH 40S
PIPE PE, SMLS BE, SMLS
ASTM-A312 TP 304
FLANGES 150# RF, SW 150# RF, WN
ASTM-A182 F 304
3000#, FS Wall Thickness to Match Pipe
FITTINGS SW BW
ASTM-A182 F 304 ASTM-A403 WP 304
GATE AS1-1SLT AS1-1RLT
BALL AS1-2RLT
PLUG N/A
VALVES
GLOBE N/A AS1-4RLT N/A

N/A AS1-5RLT, AS1-5RPLT AS1-5RLT, AS1-5RWLT
CHECK
AS1-5RWLT
NEEDLE AL1-6SLT N/A
BUTTERFLY N/A AS1-7RLLT, AS1-7RWLT
GAUGE AL1-9SLT N/A
BOLTING Bolts: ASTM-A193 GR B8M Class 2
(Note 2) Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts
GASKETS (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR or Garlock °F PSIG
NOTES: -100 275
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material 400 190
Departamento: FIC
ACCEPTABLE
BRANDS
GATE AS1-1SLT 1 ½” and Class 800#, ASTM A-182 Gr 316 SS Bonney Forge
Smaller body, Trim 12, threaded ends per DSI
ANSI/ASME B1.20.1, HF stellited seats, Newco
OS&Y, bolted bonnet, solid wedge, Smith
graphite packing. Hand wheel operated. - Velan
50 ºF design. WT per API 600/602. Test Vogt
per API 598
AS1-1RLT 2” – 4” 150# ANSI, 316 SS body, Trim 12, RF Bonney Forge

flanged ends per ANSI/ASME B16.5, Crane
OS&Y, bolted bonnet, HF stellited seats, DSI
flexible wedge, graphite packing. Hand Newco
wheel operated. -50 ºF design. WT per Velan
Walworth
AS1-1RLT 6” and Larger 150# ANSI, 316 SS body, Trim 12, RF
flanged ends per ANSI/ASME B16.5,
OS&Y, bolted bonnet, HF stellited seats,
flexible wedge, graphite packing. Gear
operated. -50 ºF design. WT per API
600/602. Test per API 598
BALL AS1-2RLT ½” - 6” 150# ANSI, 316 SS body, ball and stem, AOP
RF flanged ends per ANSI/ASME B16.5, Cameron
top or end entry, TFE seat, reduced port, Flow-tek
lever or gear (6”) operated. Floating ball. Grove
Fire safe per API 607. -50 ºF design. Test GWC (Trunnion)
per API 598 KF
Nibco
AS1-2RFLT ½” – 6” 150# ANSI, 316 SS body, ball and stem, Nutron
RF flanged ends per ANSI/ASME B16.5, PBV
top or end entry, TFE seat, full port, lever Quadrant
or gear (6”) operated. Floating ball. Fire TK
safe per API 607. -50 ºF design. Test per WKM
API 598
AS1-2RLT 8” - 10” 150# ANSI, 316 SS body, ball and stem,

top or end entry, TFE seat, reduced port,
gear operated. Trunnion mounted, double
block and bleed and sealant injection
fittings. Fire safe per API 6FA. -50 ºF
design. Test per API 598
AS1-2RFLT 8” - 10” 150# ANSI, 316 SS body, ball and stem,

top or end entry, TFE seat, full port, gear
operated. Trunnion mounted, double
fittings. Fire safe per API 6FA. -50 ºF
design. Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL AS1-2RLT 12” - 24” 150# ANSI, 316 SS body and ball, RF AOP
flanged ends per ANSI/ASME B16.5, Cameron
top or end entry, TFE seat, 17-4 PH SS Flow-tek
stem, reduced port, gear operated. Grove
Trunnion mounted, double block and GWC (Trunnion)
bleed and sealant injection fittings. Fire KF
safe per API 6FA. -50 ºF design. Test Nibco
per API 598 Nutron
PBV
AS1-2RFLT 12” - 24” 150# ANSI, 316 SS body and ball, RF Quadrant
flanged ends per ANSI/ASME B16.5, TK
top or end entry, TFE seat, 17-4 PH SS WKM
stem, full port, gear operated. Trunnion
API 6FA. -50 ºF design. Test per API
598
GLOBE AS1-4RLT 2” - 8” 150# ANSI, 316 SS body, Trim 12, RF Crane

OS&Y, bolted bonnet, HF stellited Newco
seats, graphite packing. 4” and larger Powell
removable seats. Hand wheel operated. Velan
-50 ºF design. WT per API 600/602. Walworth
Test per API 598
CHECK AS1-5RLT 2” – 3” 150# ANSI, 316 SS body, RF flanged AOP

ends per ANSI/ASME B16.5, bolted Crane
cap, Trim 12, HF stellited seats, swing DSI
check, horizontal or vertical service, KF Eagle
bolted cap. -50 ºF design. WT per API Newco
600/602. Test per API 598 PBV
Tom Wheatley
AS1-5RLT 4” and Larger 150# ANSI, 316 SS body, RF flanged Velan
ends per ANSI/ASME B16.5, bolted Walworth
cap, Trim 12, HF stellited seats, swing Wheatley
check, horizontal or vertical service,
bolted cap. Body drain ½” NPT. -50 ºF
design. WT per API 600/602. Test per
API 598
AS1-5RPLT 2” - 8” 150# ANSI, 316 SS body, RF flanged KF Eagle

ends per ANSI/ASME B16.5, bolted Norriseal
cap, 316 SS piston and spring, hard Tom Wheatley
faced seat. -50 ºF design. Test per API
598
AS1-5RWLT 2” and Larger 150# ANSI, 316 SS body and plate, Crane
wafer body design or full threaded KF Eagle
lugged body, 316 SS disc and spring, Tom Wheatley
soft seat. -50 ºF design. Test per API Wheatley
598
Departamento: FIC
ACCEPTABLE
BRANDS
NEEDLE AL1-6SLT 1” and 6000# CWP, bar stock body (316 SS), AGCO
Swagelok
BUTTERFLY AS1-7RLLT 2” and Larger 150# ANSI, 316 SS body, RF flanged Bray
ends, full lug type, according to API Center Line
609, 316 SS disc, fire safe design. Demco
Hand wheel or gear (6” and larger) Flowseal
operated. -50 ºF design. Test per API Keystone
598 KF
Norris
AS1-7RWLT 2” and Larger 150# ANSI, 316 SS body, RF flanged Quadrant
ends, wafer type, according to API 609,
316 SS disc, fire safe design. Hand
wheel or gear (6” and larger) operated. -
50 ºF design. Test per API 598
GAUGE AL1-9SLT 3/4” and 6000# CWP, bar stock body (316 SS), AGCO
lube
Departamento: FIC
CLASS: ANSI 150#

SERVICE: GP, PL
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
SCH 40S SCH 10S
ASTM-A312 TP 316
ASTM-A182 F 316
3000#, FS Wall Thickness to Match Pipe
FITTINGS SW BW
GATE AS2-1S, AS2-1Z AS2-1R
BALL AS2-2S, AS2-2Z AS2-2R
PLUG N/A
VALVES
GLOBE AS2-4S, AS2-4Z AS2-4R

CHECK AS2-5S, AS2-5Z AS2-5R
NEEDLE DA1-6S N/A
BUTTERFLY N/A AS2-7RL, AS2-7RW
GAUGE DA1-9S N/A
BOLTING Bolts: ASTM-A193 GR B8
(Note 3) Nuts: ASTM-A194 GR 8 Heavy Hex Nuts
NOTES -20/100 275

Departamento: FIC
ACCEPTABLE
BRANDS
GATE AS2-1S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
Smaller Gr CF8M or ASTM A-182 Gr 316 SS body DSI
and bonnet, threaded ends per Newco
ANSI/ASME B1.20.1, OS&Y, Trim 12, Smith
bolted bonnet, solid wedge gate, HF Velan
stellited seats. Hand wheel operated. WT Vogt
AS2-1Z 1 ½” and Class 800# (2000# CWP), ASTM-A351

Smaller Gr CF8M or ASTM A-182 Gr 316 SS body
and bonnet, socket weld ends per
ANSI/ASME B16.11, OS&Y, Trim 12,
bolted bonnet, solid wedge gate, HF
stellited seats. Hand wheel operated. WT
AS2-1R 2” - 4” 150# ANSI, ASTM-A351 Gr CF8M or 316 Bonney Forge

SS body and bonnet, RF flanged ends per Crane
ANSI/ASME B16.5, OS&Y, bolted bonnet, DSI
flexible wedge gate, Trim 12, HF stellited Newco
seats. Hand wheel operated. WT per API Velan
Walworth
AS2-1R 6” and Larger 150# ANSI, ASTM-A351 Gr CF8M or 316
SS body and bonnet, RF flanged ends per
ANSI/ASME B16.5, OS&Y, bolted bonnet,
flexible wedge gate, Trim 12, HF stellited
seats. Gear operated. WT per API
BALL AS2-2S 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP

316 SS ball and stem, threaded ends per KF
ANSI/ASME B1.20.1, reduced port, lever Nibco
Quadrant
AS2-2Z 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr WKM
AS2-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr

316 SS ball and stem, threaded ends per
ANSI/ASME B1.20.1, full port, lever
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL AS2-2ZF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP
Quadrant
WKM
AS2-2R 2” – 6” 150# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, ball and stem, RF flanged ends Cameron
per ANSI/ASME B16.5, reduced port, Flow-tek
lever or gear (6”) operated. Floating ball. Grove
Fire safe. Test per API 598 GWC (Trunnion)
KF
AS2-2RF 2” – 6” 150# ANSI, ASTM-A351 Gr CF8M or 316 Nibco
SS body, ball and stem, RF flanged ends Nutron
per ANSI/ASME B16.5, full port, lever or PBV
gear (6”) operated. Floating ball. Fire Quadrant
safe. Test per API 598 TK
WKM
AS2-2R 8” and Larger 150# ANSI, ASTM-A351 Gr CF8M or 316
SS body, ball and stem, RF flanged ends
gear operated. Trunnion mounted, double
fittings. Fire safe. Test per API 598
AS2-2RF 8” and Larger 150# ANSI, ASTM-A351 Gr CF8M or 316

SS body, ball and stem, RF flanged ends
per ANSI/ASME B16.5, full port, gear
GLOBE AS2-4S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
bolted bonnet, HF stellited seats. Hand Velan
wheel operated. WT per API 600/602. Vogt
Test per API 598
AS2-4Z 1 ½” and Class 800# (2000# CWP), ASTM-A351

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE AS2-4R 2” and Larger 150# ANSI, ASTM-A351 Gr CF8M or 316 Crane
SS body and bonnet, RF flanged ends per DSI
ANSI/ASME B16.5, OS&Y, bolted bonnet, Newco
Trim 12, HF stellited seats. Hand wheel Powell
operated. WT per API 600/602. Test per Velan
API 598 Walworth
CHECK AS2-5S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr AOP

Smaller CF8M or ASTM A-182 Gr 316 SS body and Bonney Forge
cover, threaded ends per ANSI/ASME DSI
B1.20.1, horizontal swing, threaded or KF Eagle
bolted cover, Trim 12. WT per API 600/602. Newco
Test per API 598 Tom Wheatley
Velan
AS2-5Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Vogt
Smaller CF8M or ASTM A-182 Gr 316 SS body and Wheatley
cover, socket weld ends per ANSI/ASME
B16.11, horizontal swing, threaded or bolted
cover, Trim 12. WT per API 600/602. Test
per API 598
AS2-5R 2” - 3” 150# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, RF flanged ends per ANSI/ASME Crane
B16.5, horizontal swing, bolted cover, Trim DSI
12. WT per API 600/602. Test per API 598 KF Eagle
Newco
AS2-5R 4” and Larger 150# ANSI, ASTM-A351 Gr CF8M or 316 PBV
SS body, RF flanged ends per ANSI/ASME Tom Wheatley
B16.5, horizontal swing, bolted cover, Trim Velan
12. Body drain ½” NPT. WT per API Walworth
600/602. Test per API 598 Wheatley
NEEDLE DA1-6S 1” and 6000 PSI @ 200 °F, bar stock body (316 AGCO
Smaller SS), M x FM threaded ends, teflon stem AOP
seat, soft or hard seats Apollo
KF
Swagelok
BUTTERFLY AS2-7RL 2” and Larger 150# ANSI, ASTM-A351 Gr CF8M or Bray

316SS body, lug to mate with RF flanges, Center Line
according to API 609, 316 SS stem and Demco
disc, buna seat. Hand wheel or gear (6” and Flowseal
larger) operated. Test per API 598 Keystone
KF
AS2-7RW 2” and Larger 150# ANSI, ASTM-A351 Gr CF8M or Norris
316SS body, wafer to mate with RF flanges, Quadrant
according to API 609, 316 SS stem and
disc, buna seat. Hand wheel or gear (6” and
Departamento: FIC
ACCEPTABLE
BRANDS
GAUGE DA1-9S ¾” and 6000 PSI @ 200 °F, bar stock body (316 AGCO
Smaller SS), one male and three female, needle AOP
port, teflon stem seat, soft seat material, Swagelok
complete with bleeder valve and 316 SS
hex plug
Departamento: FIC
Piping Specification “AX1” Página No.: 33 de 135
CLASS: ANSI 150#

SERVICE: OP, WP
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 12 814 10
16 18 20 24
PIPE THD/PE FE, SMLS
ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)
ASTM-A105, GALV ASTM-A105, Internally Coated (Note 5)
FITTINGS THD/SW FE
ASTM-A105, GALV ASTM-A234 GR WPB, Internally Coated (Note 5)
GATE AX1-1S, AX1-1Z AX1-1R
BALL CA1-2S, CA1-2Z AX1-2R
VALVES (Note 6)
PLUG N/A
GLOBE AX1-4S, AX1-4Z AX1-4R
CHECK AX1-5S, AX1-5Z AX1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A
GAUGE DA1-9S N/A
BOLTING Bolts: ASTM-A193 GR B7 Fluorocarbon Coated
(Note 7) Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts
NOTES: -20/100 285

1. This specification will be used only for replacement in existing systems 200 260
4. Flanges shall be used in lieu of unions 500 170
5. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159
6. Valves for corrosive applications should be supplied with the appropriate internal valve
coating and trim, and it’s could be Plasite 7159 or Enduro Bond
9. For Internal Coating Specifications, see ATTACHMENT I
Departamento: FIC
ACCEPTABLE
BRANDS
GATE AX1-1S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Bonney Forge
Smaller CF8M or ASTM A-182 Gr 316 SS body DSI
AX1-1Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr

Smaller CF8M or ASTM A-182 Gr 316 SS body
AX1-1R 2” – 4” 150# ANSI, CS body and bonnet (ASTM- Bonney Forge

A216 Gr WCB or ASTM-A105), internally Crane
coated, RF flanged ends per ANSI/ASME DSI
B16.5, OS&Y, bolted bonnet, flexible Newco
wedge gate, Trim 12 and HF stellited Velan
seats. Hand wheel operated. WT per API Vogt
AX1-1R 6” and 150# ANSI, CS body and bonnet (ASTM-

Larger A216 Gr WCB or ASTM-A105), internally
coated, RF flanged ends per ANSI/ASME
B16.5, OS&Y, bolted bonnet, flexible
wedge gate, Trim 12 and HF stellited
BALL CA1-2S 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M AOP
Smaller or ASTM A-182 Gr 316 SS body, 316 SS Apollo
ball and stem, threaded ends per KF
operated, filled teflon seats. Fire safe. Test Nutron
per API 598 PBV
Quadrant
CA1-2Z 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M WKM
Smaller or ASTM A-182 Gr 316 SS body, 316 SS
ball and stem, socket weld ends per
ANSI/ASME B16.11, reduced port, lever
operated, filled teflon seats. Fire safe. Test
per API 598
CA1-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M

ball and stem, threaded ends per
per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL CA1-2ZF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M AOP
ball and stem, socket weld ends per KF
ANSI/ASME B16.11, full port, lever Nibco
per API 598 PBV
Quadrant
WKM
AX1-2R 2” – 3” 150# ANSI, CS body (ASTM-A216 Gr WCB AOP

or ASTM-A105), internally coated, RF Cameron
flanged ends per ANSI/ASME B16.5, Grove
reduced port, lever operated, 316 SS ball GWC (Trunnion)
and stem. Floating ball. Fire safe. Test per KF
API 598 Nibco
Nutron
AX1-2RF 2” – 3” 150# ANSI, CS body (ASTM-A216 Gr WCB PBV
or ASTM-A105), internally coated, RF Quadrant
flanged ends per ANSI/ASME B16.5, full TK
port, lever operated, 316 SS ball and stem. WKM
Floating ball. Fire safe. Test per API 598
AX1-2R 4” and Larger 150# ANSI, CS body (ASTM-A216 Gr WCB

or ASTM-A105), internally coated, RF
reduced port, lever or gear (6” and larger)
operated, 316 SS ball and stem. Trunnion
sealant injection fittings. Fire safe. Test per
API 598
AX1-2RF 4” and Larger 150# ANSI, CS body (ASTM-A216 Gr WCB

flanged ends per ANSI/ASME B16.5, full
port, lever or gear (6” and larger) operated,
316 SS ball and stem. Trunnion mounted,
double block and bleed and sealant
injection fittings. Fire safe. Test per API 598
GLOBE AX1-4S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Bonney Forge
Smaller CF8M or ASTM A-182 Gr 316 SS body and DSI
bonnet, threaded ends per ANSI/ASME Newco
B1.20.1, OS&Y, Trim 12, bolted bonnet, HF Smith
stellited seats. Hand wheel operated. WT Velan
per API 600/602. Test per API 598 Vogt
AX1-4Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr

Smaller CF8M or ASTM A-182 Gr 316 SS body and
bonnet, socket weld ends per ANSI/ASME
B16.11, OS&Y, Trim 12, bolted bonnet, HF
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE AX1-4R 2” and Larger 150# ANSI, CS body and bonnet (ASTM- Crane
A216 Gr WCB or ASTM-A105), internally DSI
coated, RF flanged ends per ANSI/ASME Newco
B16.5, OS&Y, bolted bonnet, Trim 12 and Powell
HF stellited seats. Hand wheel operated. Velan
WT per API 600/602. Test per API 598 Walworth
CHECK AX1-5S 1 ½” and Class 800# (2000# CWP), ASTM-A351 AOP

Smaller Gr CF8M or ASTM A-182 Gr 316 SS body Bonney Forge
and cover, threaded ends per DSI
ANSI/ASME B1.20.1, horizontal swing, KF Eagle
threaded or bolted cover, Trim 12. WT per Newco
API 600/602. Test per API 598 Tom Wheatley
Velan
AX1-5Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Vogt
Smaller Gr CF8M or ASTM A-182 Gr 316 SS body Wheatley
and cover, socket weld ends per
ANSI/ASME B16.11, horizontal swing,
threaded or bolted cover, Trim 12. WT per
AX1-5R 2” - 3” 150# ANSI, CS body and cover (ASTM- AOP

B16.5, horizontal swing, bolted cover, KF Eagle
Trim 12. WT per API 600/602. Test per Newco
API 598 PBV
Tom Wheatley
AX1-5R 4” and Larger 150# ANSI, CS body and cover (ASTM- Velan
A216 Gr WCB or ASTM-A105), internally Walworth
coated, RF flanged ends per ANSI/ASME Wheatley
B16.5, horizontal swing, bolted cover,
Trim 12. Body drain ½” NPT. WT per API
NEEDLE DA1-6S 1” and Smaller 6000 PSI @ 200 °F, bar stock body (316 AGCO
SS), M x FM threaded ends, teflon stem AOP
KF
DA1-6SFM 1” and Smaller 6000 PSI @ 200 °F, bar stock body (316 Swagelok
SS), FM x FM threaded ends, teflon stem
seat, soft or hard seats
GAUGE DA1-9S ¾” and Smaller 6000 PSI @ 200 °F, bar stock body (316 AGCO
SS), one male and three female, needle AOP
hex plug
Departamento: FIC
Piping Specification “AY1” Página No.: 37 de 135
CLASS: ANSI 150#

SERVICE: DO, DRG, DRP
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24
ASTM-A105
FITTINGS THD/SW BW
GATE CA1-1S, CA1-1Z AY1-1R
BALL CA1-2S, CA1-2Z AY1-2R
PLUG N/A
VALVES
GLOBE CA1-4S, CA1-4Z AY1-4R

CHECK CA1-5S, CA1-5Z AY1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A AY1-7RL, AY1-7RW
GAUGE DA1-9S N/A
NOTES: -20/100 285
1. Pipe to be externally coated with FBE according to Specification: B15-ECU-20-SP-001 200 260
"Above ground external / internal coating and galvanizing” or anticorrosive / 300 230
mechanical tape according to Procedure B15-ECU-20-PR-008 “Coating”. 400 200
3. Glycol piping shall be SW only, except vent, drain, sample and instrument service
Departamento: FIC
ACCEPTABLE
BRANDS

AY1-1R 2” – 4” 150# ANSI, CS body and bonnet Bonney Forge

AY1-1R 6” and Larger 150# ANSI, CS body and bonnet

Test per API 598

Quadrant

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
Quadrant
WKM
AY1-2R 2” – 6” 150# ANSI, CS body (ASTM-A216 Gr AOP
lever or gear (6”) operated, CS ENP ball GWC (Trunnion)
and stem. Floating ball. Fire safe. Test KF
per API 598 Nibco
Nutron
AY1-2RF 2” – 6” 150# ANSI, CS body (ASTM-A216 Gr PBV
WCB or ASTM-A105), RF flanged ends Quadrant
per ANSI/ASME B16.5, full port, lever or TK
gear (6”) operated, CS ENP ball and WKM
API 598
AY1-2R 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

AY1-2RF 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

operated, CS ENP ball and stem.

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE AY1-4R 2” and Larger 150# ANSI, CS body and bonnet Crane
API 598

Velan
Test per API 598
AY1-5R 2” - 3” 150# ANSI, CS body and cover (ASTM- AOP

Tom Wheatley
AY1-5R 4” and Larger 150# ANSI, CS body and cover (ASTM- Velan
KF
BUTTERFLY AY1-7RL 2” and Larger 200 PSI, CS body, lug to mate with RF Bray
KF
Norris
Quadrant
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY AY1-7RW 2” and Larger 200 PSI, CS body, wafer to mate with Bray
RF flanges, according to API 609, SS Center Line
stem, bronze or iron disc, buna seat. Demco
Latch locking lever or gear (6” and Flowseal
KF
Norris
Quadrant
and 316 SS hex plug
Departamento: FIC
Piping Specification “BA1” Página No.: 42 de 135
CLASS: ANSI 300#

SERVICE: G, GF, GP, OP, WP
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 1210 14 16 18 20 24
SCH 160 SCH 80 SCH STD SCH 40 SCH 30 SCH 40
ASTM-A105
FITTINGS THD/SW BW
GATE CA1-1S, CA1-1Z BA1-1R
BALL CA1-2S, CA1-2Z BA1-2R
PLUG N/A
VALVES
GLOBE CA1-4S, CA1-4Z BA1-4R

CHECK CA1-5S, CA1-5Z BA1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A BA1-7RL, BA1-7RW
GAUGE DA1-9S N/A
NOTES: -20/100 740
Departamento: FIC
ACCEPTABLE
BRANDS

BA1-1R 2” – 4” 300# ANSI, CS body and bonnet Bonney Forge

BA1-1R 6” and Larger 300# ANSI, CS body and bonnet

Test per API 598

Quadrant

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
Quadrant
WKM
BA1-2R 2” – 3” 300# ANSI, CS body (ASTM-A216 Gr AOP
lever operated, CS ENP ball and stem. GWC (Trunnion)
Floating ball. Fire safe. Test per API 598 KF
Nibco
BA1-2RF 2” – 3” 300# ANSI, CS body (ASTM-A216 Gr Nutron
WCB or ASTM-A105), RF flanged ends PBV
per ANSI/ASME B16.5, full port, lever Quadrant
operated, CS ENP ball and stem. Floating TK
ball. Fire safe. Test per API 598 WKM
BA1-2R 4” and Larger 300# ANSI, CS body (ASTM-A216 Gr

lever or gear (6” and larger) operated, CS
ENP ball and stem. Trunnion mounted,
injection fittings. Fire safe. Test per API
598
BA1-2RF 4” and Larger 300# ANSI, CS body (ASTM-A216 Gr

per ANSI/ASME B16.5, full port, lever or
gear (6” and larger) operated, CS ENP
ball and stem. Trunnion mounted, double
Smaller bonnet (ASTM-A105), threaded ends per DSI
ANSI/ASME B1.20.1, OS&Y, Trim 8, Newco
bolted bonnet, HF stellited seats. Hand Smith
wheel operated. WT per API 600/602. Velan
Test per API 598 Vogt

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE BA1-4R 2” and Larger 300# ANSI, CS body and bonnet Crane
API 598

Velan
Test per API 598
BA1-5R 2” - 3” 300# ANSI, CS body and cover (ASTM- AOP

Tom Wheatley
BA1-5R 4” and Larger 300# ANSI, CS body and cover (ASTM- Velan
KF
BUTTERFLY BA1-7RL 2” and Larger 300# ANSI, CS body, lug to mate with Bray
RF flanges, according to API 609, SS Center Line
stem, bronze or iron disc, buna seat. Demco
KF
Norris
Quadrant
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY BA1-7RW 2” and Larger 300# ANSI, CS body, wafer to mate Bray
with RF flanges, according to API 609, Center Line
SS stem, bronze or iron disc, buna seat. Demco
KF
Norris
Quadrant
and 316 SS hex plug
Departamento: FIC
Piping Specification “BL1” Página No.: 47 de 135
CLASS: ANSI 300#

SERVICE: BD1
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 8 10 3
12 14 416 20 6 24
SCH 160 SCH 80 SCH STD SCH XS SCH 40
PIPE THD/PE, SMLS BE, SMLS
ASTM-A333 GR 6 (Note 3)
ASTM-A350 GR LF2
FITTINGS SW/THD BW
ASTM-A350 GR LF2 ASTM-A420 GR WPL6
GATE BL1-1SLT BL1-1RLT
BALL BL1-2SLT BL1-2RLT
PLUG N/A
VALVES
GLOBE BL1-4SLT BL1-4RLT N/A

BL1-5RLT BL1-5RLT, BL1-5RPLT
CHECK N/A BL1-5RLT, BL1-5RWLT
BL1-5RPLT BL1-5RWLT
NEEDLE BL1-6SLT N/A
BUTTERFLY N/A BL1-7RLLT, BL1-7RWLT
GAUGE BL1-9SLT N/A
BOLTING Bolts: ASTM-A320 GR L7, Fluorocarbon Coated
(Note 5) Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts
NOTES: -50/100 285
3. MTRs and CTRs for low temperature material and certification tests are required per 400 200
ASME B31.3 500 170
Departamento: FIC
ACCEPTABLE
BRANDS
GATE BL1-1SLT ¾” and Smaller Class 800# (2000 PSI @ 100 °F), FS Bonney Forge
body (ASTM-A350 Gr LF2), threaded DSI
ends per ANSI/ASME B1.20.1, bolted Newco
body construction, OS&Y, solid wedge, Smith
Trim 12, HF stellited seats, grafoil Velan
BL1-1RLT 1” – 4” 300# ANSI, CS body (ASTM-A352 Gr Bonney Forge

B16.5, bolted bonnet, OS&Y, solid or DSI
flexible (2” and larger) wedge disc, Trim Newco
12, grafoil packing. Hand wheel Velan
operated. WT per API 600/602. Test Vogt
per API 598 Walworth
BL1-1RLT 6” and Larger 300# ANSI, CS body (ASTM-A352 Gr

B16.5, bolted bonnet, OS&Y, solid or
flexible (2” and larger) wedge disc, Trim
12, grafoil packing. Gear operated. WT
BALL BL1-2SLT ¾” and Smaller 1500# WOG, forged CS body (ASTM- AOP
A350 Gr LF2), threaded ends per KF
ANSI/ASME B1.20.1, 316 SS ball and Nibco
stem, lever operated, filled TFE seats, Nutron
reduced port. Fire safe per API 607. PBV
Test per API 598 WKM
BL1-2SFLT ¾” and Smaller 1500# WOG, forged CS body (ASTM-

A350 Gr LF2), threaded ends per
ANSI/ASME B1.20.1, 316 SS ball and
stem, lever operated, filled TFE seats,
full port. Fire safe per API 607. Test per
API 598
BL1-2RLT 1” - 3” 300# ANSI, CS body (ASTM-A352 Gr AOP

Fire safe seat, CS ENP ball and stem, KF
reduced port, lever operated. Floating Nibco
ball. Fire safe per API 607. Test per API Nutron
598 PBV
Quadrant
BL1-2RFLT 1” - 3” 300# ANSI, CS body (ASTM-A352 Gr TK
full port, lever operated. Floating ball.
Fire safe per API 607. Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL BL1-2RLT 4” - 10” 300# ANSI, CS body (ASTM-A352 Gr AOP
Fire safe seat, CS ENP ball and stem, GWC (Trunnion)
reduced port, lever or gear (6” and KF
larger) operated. Trunnion mounted, Nibco
double block and bleed and sealant Nutron
injection fittings. Fire safe per API 6FA. PBV
Test per API 598 Quadrant
TK
BL1-2RFLT 4” - 10” 300# ANSI, CS body (ASTM-A352 Gr WKM
full port, lever or gear (6” and larger)
fittings. Fire safe per API 6FA. Test per
API 598
BL1-2RLT 12” and Larger 300# ANSI, CS body (ASTM-A352 Gr

SS stem, reduced port, gear operated.
BL1-2RFLT 12” and Larger 300# ANSI, CS body (ASTM-A352 Gr

SS stem, full port, gear operated.
GLOBE BL1-4SLT 1 ½” and Class 800# (2000# CWP), CS body and Bonney Forge
Smaller bonnet (ASTM-A350 Gr LF2), threaded DSI
Trim 12, bolted bonnet, HF stellited Smith
BL1-4RLT 2” - 8” 300# ANSI, CS body (ASTM-A352 Gr Crane

LCC), RF flanged ends per ANSI/ASME DSI
B16.5, bolted bonnet, OS&Y, Trim 12, Newco
grafoil packing. Hand wheel operated. Powell
Walworth
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK BL1-5RLT 1” - 3” 300# ANSI, CS body (ASTM-A352 Gr AOP
B16.5, swing check, bolted bonnet, Trim DSI
12, hard or soft seals, horizontal or KF Eagle
vertical service, Fire safe bonnet. WT Newco
per API 600/602. Test per API 598 PBV
Tom Wheatley
BL1-5RLT 4” and Larger 300# ANSI, CS body (ASTM-A352 Gr Velan
LCC), RF flanged ends per ANSI/ASME Walworth
B16.5, swing check, bolted bonnet, Trim Wheatley
12, hard or soft seals, horizontal or
vertical service, Fire safe bonnet. Body
drain ½” NPT. WT per API 600/602.
Test per API 598
BL1-5RPLT 1” - 1 ½” 300# ANSI, forged CS body (ASTM-350 Bonney Forge

Gr LF2), RF flanged ends per DSI
ANSI/ASME B16.5, threaded or bolted Smith
bonnet, 316 SS piston and spring, Vogt
integral 13% chrome to hard faced seat.
Test per API 598
BL1-5RPLT 2” - 8” 300# ANSI, CS body (ASTM-A352 Gr KF Eagle

LCC), RF flanged ends per ANSI/ASME Norriseal
B16.5, bolted bonnet, 316 SS piston Tom Wheatley
and spring, soft seals. Fire safe bonnet.
Test per API 598
BL1-5RWLT 2” - 24” 300# ANSI, CS body and cover (ASTM- Crane

A352 Gr LCC), wafer body design or full KF Eagle
threaded lugged body, 316 SS disc and Tom Wheatley
springs, soft seat. Test per API 598 Wheatley
NEEDLE BL1-6SLT 1” and 6000# CWP, bar stock body (316 SS), AGCO
Swagelok
BUTTERFLY BL1-7RLLT 3” and Larger 300# ANSI, high performance type, low Keystone
RF, full lug type, according to API 609, WKM
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY BL1-7RWLT 3” and Larger 300# ANSI, high performance type, low Keystone
RF, wafer type, according to API 609, WKM
GAUGE BL1-9SLT 3/4” and 6000# CWP, bar stock body (316 SS), AGCO
lube
Departamento: FIC
Piping Specification “BS1” Página No.: 52 de 135
CLASS: ANSI 300#

SERVICE: GP
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
SCH 80S SCH 40S
ASTM-A312 TP 304
ASTM-A182 F 304
FITTINGS SW BW
GATE BS1-1S, BS1-1Z BS1-1R
BALL BS1-2R
PLUG N/A
VALVES
GLOBE BS1-4R
CHECK N/A BS1-5R, BS1-5RP
NEEDLE DS1-6S, DS1-6SFM N/A
BUTTERFLY N/A
GAUGE DS1-9S N/A
NOTES: -20/100 720
1. Valve elastomers in contact with process fluids shall be suitable for exposure to 200 600
Hydrogen Sulfide, Carbon Dioxide and Aromatics 300 540
3. For Bolts dimensions see, ATTACHMENT G 500 465
Departamento: FIC
ACCEPTABLE
BRANDS
GATE BS1-1S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
BS1-1Z 1 ½” and Class 800# (2000# CWP), ASTM-A351

BS1-1R 2” - 4” 300# ANSI, ASTM-A351 Gr CF8M or 316 Bonney Forge

Walworth
BS1-1R 6” and Larger 300# ANSI, ASTM-A351 Gr CF8M or 316
BALL BS1-2R ½” - 3” 300# ANSI, ASTM-A351 Gr CF8M or 316 AOP

per ANSI/ASME B16.5, top or end entry, Flow-tek
TFE seat, reduced port, lever operated. Grove
Floating ball. Fire safe per API 607. Test KF
per API 598 Nibco
Nutron
BS1-2RF ½” - 3” 300# ANSI, ASTM-A351 Gr CF8M or 316 PBV
SS body, ball and stem, RF flanged ends Quadrant
per ANSI/ASME B16.5, top or end entry, TK
TFE seat, full port, lever operated. WKM
Floating ball. Fire safe per API 607. Test
per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL BS1-2R 4” - 10” 300# ANSI, ASTM-A351 Gr CF8M or AOP
316 SS body, ball and stem, RF flanged Cameron
ends per ANSI/ASME B16.5, top or end Flow-tek
entry, TFE seat, reduced port, lever or Grove
gear (6” and larger) operated. Trunnion GWC (Trunnion)
mounted, double block and bleed and KF
sealant injection fittings. Fire safe per Nibco
API 6FA. Test per API 598 Nutron
PBV
BS1-2RF 4” - 10” 300# ANSI, ASTM-A351 Gr CF8M or Quadrant
316 SS body, ball and stem, RF flanged TK
ends per ANSI/ASME B16.5, top or end WKM
entry, TFE seat, full port, lever or gear
(6” and larger) operated. Trunnion
GLOBE BS1-4R ½” - 10” 300# ANSI, ASTM-A351 Gr CF8M or Crane

316 SS body and bonnet, RF flanged DSI
ends per ANSI/ASME B16.5, OS&Y, Newco
bolted bonnet, Trim 12, HF stellited Powell
API 600/602. Test per API 598 Walworth
CHECK BS1-5R 2” - 3” 300# ANSI, ASTM-A351 Gr CF8M or AOP

316 SS body, RF flanged ends per Crane
ANSI/ASME B16.5, horizontal swing, DSI
bolted cover, Trim 12. WT per API KF Eagle
600/602. Test per API 598 Newco
PBV
BS1-5R 4” and Larger 300# ANSI, ASTM-A351 Gr CF8M or Tom Wheatley
316 SS body, RF flanged ends per Velan
ANSI/ASME B16.5, horizontal swing, Walworth
bolted cover, Trim 12. Body drain ½” Wheatley
NPT. WT per API 600/602. Test per API
598
BS1-5RP 2” - 10” 300# ANSI, ASTM-A351 Gr CF8M or KF Eagle

316 SS body, RF flanged ends per Norriseal
ANSI/ASME B16.5, bolted cap, 316 SS Tom Wheatley
piston and spring, hard faced seat. Test
per API 598
NEEDLE DS1-6S 1” and Smaller 2000 PSI @ 400 °F, bar stock body AGCO
stem seat, peek seat material Apollo
KF
DS1-6SFM 1” and Smaller 2000 PSI @ 400 °F, bar stock body Swagelok
teflon stem seat, peek seat material
Departamento: FIC
ACCEPTABLE
BRANDS
GAUGE DS1-9S ¾” and Smaller 4000 PSI @ 500 °F, bar stock body AGCO
needle port, teflon packing, metal seat, Swagelok
SS plug
Departamento: FIC
CLASS: ANSI 300#

SERVICE: GP, PL
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
SCH 80S SCH 40S
ASTM-A312 TP 316
ASTM-A182 F 316
FITTINGS SW BW
GATE BS2-1S, BS2-1Z BS2-1R
BALL BS2-2R
PLUG N/A
VALVES
GLOBE BS2-4R
CHECK N/A BS2-5R, BS2-5RP
BUTTERFLY N/A
GAUGE DS1-9S N/A
NOTES: -20/100 720
Departamento: FIC
ACCEPTABLE
BRANDS
GATE BS2-1S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
BS2-1Z 1 ½” and Class 800# (2000# CWP), ASTM-A351

BS2-1R 2” - 4” 300# ANSI, ASTM-A351 Gr CF8M or 316 Bonney Forge

Walworth
BS2-1R 6” and Larger 300# ANSI, ASTM-A351 Gr CF8M or 316
BALL BS2-2R ½” - 3” 300# ANSI, ASTM-A351 Gr CF8M or 316 AOP

per ANSI/ASME B16.5, top or end entry, Flow-tek
TFE seat, reduced port, lever operated. Grove
Floating ball. Fire safe per API 607. Test KF
per API 598 Nibco
Nutron
BS2-2RF ½” - 3” 300# ANSI, ASTM-A351 Gr CF8M or 316 PBV
TFE seat, full port, lever operated. WKM
Floating ball. Fire safe per API 607. Test
per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL BS2-2R 4” - 10” 300# ANSI, ASTM-A351 Gr CF8M or AOP
316 SS body, ball and stem, RF flanged Cameron
ends per ANSI/ASME B16.5, top or end Flow-tek
entry, TFE seat, reduced port, lever or Grove
gear (6” and larger) operated. Trunnion GWC (Trunnion)
mounted, double block and bleed and KF
sealant injection fittings. Fire safe per Nibco
API 6FA. Test per API 598 Nutron
PBV
BS2-2RF 4” - 10” 300# ANSI, ASTM-A351 Gr CF8M or Quadrant
316 SS body, ball and stem, RF flanged TK
ends per ANSI/ASME B16.5, top or end WKM
entry, TFE seat, full port, lever or gear
(6” and larger) operated. Trunnion
GLOBE BS2-4R ½” - 10” 300# ANSI, ASTM-A351 Gr CF8M or Crane

316 SS body and bonnet, RF flanged DSI
ends per ANSI/ASME B16.5, OS&Y, Newco
bolted bonnet, Trim 12, HF stellited Powell
API 600/602. Test per API 598 Walworth
CHECK BS2-5R 2” - 3” 300# ANSI, ASTM-A351 Gr CF8M or AOP

316 SS body, RF flanged ends per Crane
bolted cover, Trim 12. WT per API KF Eagle
600/602. Test per API 598 Newco
PBV
BS2-5R 4” and Larger 300# ANSI, ASTM-A351 Gr CF8M or Tom Wheatley
316 SS body, RF flanged ends per Velan
bolted cover, Trim 12. Body drain ½” Wheatley
598
BS2-5RP 2” - 10” 300# ANSI, ASTM-A351 Gr CF8M or KF Eagle

316 SS body, RF flanged ends per Norriseal
piston and spring, hard faced seat. Test
per API 598
NEEDLE DS1-6S 1” and Smaller 2000 PSI @ 400 °F, bar stock body AGCO
stem seat, peek seat material Apollo
KF
DS1-6SFM 1” and Smaller 2000 PSI @ 400 °F, bar stock body Swagelok
teflon stem seat, peek seat material
Departamento: FIC
ACCEPTABLE
BRANDS
GAUGE DS1-9S ¾” and Smaller 4000 PSI @ 500 °F, bar stock body AGCO
needle port, teflon packing, metal seat, Swagelok
SS plug
Departamento: FIC
Piping Specification “BX1” Página No.: 60 de 135
CLASS: ANSI 300#

SERVICE: OP, WP
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 8 6
10 12 14 16 18 20 24
SCH 160 SCH 80 SCH STD SCH 40 SCH 30
ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)
FITTINGS THD/SW FE
GATE BX1-1S, BX1-1Z BX1-1R, BX1-1RSG
BALL CA1-2S, CA1-2Z BX1-2R
VALVES (Note 6)
PLUG N/A
GLOBE BX1-4S, BX1-4Z BX1-4R
CHECK BX1-5S, BX1-5Z BX1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A
GAUGE DA1-9S N/A
NOTES: -20/100 740

6. Valves for corrosive applications should be supplied with the appropriate internal
valve coating and trim, and it’s could be Plasite 7159 or Enduro Bond
Departamento: FIC
ACCEPTABLE
BRANDS
GATE BX1-1S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Bonney Forge
Smaller CF8M or ASTM A-182 Gr 316 SS body DSI
BX1-1Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr

Smaller CF8M or ASTM A-182 Gr 316 SS body
BX1-1R 2” – 4” 300# ANSI, CS body and bonnet (ASTM- Bonney Forge

seats. Hand wheel operated. WT per API Vogt
BX1-1R 6” and 300# ANSI, CS body and bonnet (ASTM-

Larger A216 Gr WCB or ASTM-A105), internally
BX1-1RSG 2” and 300#, CS body (ASTM-A216 Gr WCB or M&J

Larger ASTM-A105), internally coated, RF flanged Foster
ends, API-6D, full port, through-conduit, WKM
bolted bonnet, rising stem, nonrising hand
wheel, slab gate with floating seats for
corrosive service, fire tested API 6FA.
Hand wheel or gear (6” and larger)
operated
BALL CA1-2S 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M AOP
ball and stem, threaded ends per KF
per API 598 PBV
Quadrant
WKM
Departamento: FIC
ACCEPTABLE
BRANDS
BALL CA1-2Z 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M AOP
ball and stem, socket weld ends per KF
ANSI/ASME B16.11, reduced port, lever Nibco
per API 598 PBV
Quadrant
CA1-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M WKM
ball and stem, threaded ends per
per API 598
CA1-2ZF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr CF8M

ball and stem, socket weld ends per
ANSI/ASME B16.11, full port, lever
per API 598
BX1-2R 2” – 3” 300# ANSI, CS body (ASTM-A216 Gr WCB AOP

or ASTM-A105), internally coated, RF Cameron
flanged ends per ANSI/ASME B16.5, Grove
reduced port, lever operated, 316 SS ball GWC (Trunnion)
and stem. Floating ball. Fire safe. Test per KF
API 598 Nibco
Nutron
BX1-2RF 2” – 3” 300# ANSI, CS body (ASTM-A216 Gr WCB PBV
or ASTM-A105), internally coated, RF Quadrant
flanged ends per ANSI/ASME B16.5, full TK
port, lever operated, 316 SS ball and stem. WKM
Floating ball. Fire safe. Test per API 598
BX1-2R 4” and Larger 300# ANSI, CS body (ASTM-A216 Gr WCB

reduced port, lever or gear (6” and larger)
sealant injection fittings. Fire safe. Test per
API 598
BX1-2RF 4” and Larger 300# ANSI, CS body (ASTM-A216 Gr WCB

flanged ends per ANSI/ASME B16.5, full
port, lever or gear (6” and larger) operated,
316 SS ball and stem. Trunnion mounted,
injection fittings. Fire safe. Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE BX1-4S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Bonney Forge
Smaller CF8M or ASTM A-182 Gr 316 SS body and DSI
bonnet, threaded ends per ANSI/ASME Newco
B1.20.1, OS&Y, Trim 12, bolted bonnet, HF Smith
BX1-4Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr

B16.11, OS&Y, Trim 12, bolted bonnet, HF
BX1-4R 2” and Larger 300# ANSI, CS body and bonnet (ASTM- Crane
CHECK BX1-5S 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr AOP

Smaller CF8M or ASTM A-182 Gr 316 SS body and Bonney Forge
cover, threaded ends per ANSI/ASME DSI
B1.20.1, horizontal swing, threaded or KF Eagle
bolted cover, Trim 12. WT per API 600/602. Newco
Velan
BX1-5Z 1 ½” and Class 800# (2000# CWP), ASTM-A351 Gr Vogt
Smaller CF8M or ASTM A-182 Gr 316 SS body and Wheatley
cover, socket weld ends per ANSI/ASME
B16.11, horizontal swing, threaded or bolted
cover, Trim 12. WT per API 600/602. Test
per API 598
BX1-5R 2” - 3” 300# ANSI, CS body and cover (ASTM- AOP

B16.5, horizontal swing, bolted cover, Trim KF Eagle
12. WT per API 600/602. Test per API 598 Newco
PBV
BX1-5R 4” and Larger 300# ANSI, CS body and cover (ASTM- Tom Wheatley
A216 Gr WCB or ASTM-A105), internally Velan
coated, RF flanged ends per ANSI/ASME Walworth
B16.5, horizontal swing, bolted cover, Trim Wheatley
12. Body drain ½” NPT. WT per API
Departamento: FIC
ACCEPTABLE
BRANDS
KF
hex plug
Departamento: FIC
Piping Specification “CA1” Página No.: 65 de 135
CLASS: ANSI 600#

SERVICE: C, G, GF, GP, OL, V
CS, RF
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24
SCH 160 SCH 80
PIPE PE/THD BE, SMLS
FLANGES 600# RF, SW 600# RF/RTJ, WN
ASTM-A105
6000# FS 3000# FS Wall Thickness to Match Pipe
FITTINGS SW/THD BW
GATE CA1-1S, CA1-1Z CA1-1R
BALL CA1-2S, CA1-2Z CA1-2R
PLUG N/A
VALVES
GLOBE CA1-4S, CA1-4Z CA1-4R

CHECK CA1-5S, CA1-5Z CA1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A
GAUGE DA1-9S N/A
600# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR or Garlock PRESS./TEMP. RATINGS
GASKETS Style RW) °F PSIG
600# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated REF. ANSI/ASME B16.5
(Flexitallic or Lamons)
NOTES: -20/100 1480
Departamento: FIC
ACCEPTABLE
BRANDS

CA1-1R 2” – 3” 600# ANSI, CS body and bonnet Bonney Forge

CA1-1R 4” and Larger 600# ANSI, CS body and bonnet

Test per API 598

Quadrant

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
Quadrant
WKM
CA1-2R 2” and Larger 600# ANSI, CS body (ASTM-A216 Gr AOP
lever or gear (4” and larger) operated, GWC (Trunnion)
CS ENP ball and stem. Trunnion KF
sealant injection fittings. Fire safe. Test Nutron
per API 598 PBV
Quadrant
CA1-2RF 2” and Larger 600# ANSI, CS body (ASTM-A216 Gr
TK
WCB or ASTM-A105), RF flanged ends WKM
ball and stem. Trunnion mounted,
598
bolted bonnet, HF stellited seats. Hand Smith
wheel operated. WT per API 600/602. Velan

Test per API 598
CA1-4R 2” and Larger 600# ANSI, CS body and bonnet Crane

RF flanged ends per ANSI/ASME B16.5, Newco
OS&Y, bolted bonnet, Trim 8 and HF Powell
Departamento: FIC
ACCEPTABLE
BRANDS
bolted cover, Trim 8, HF stellited seats. Newco
WT per API 600/602. Test per API 598 Tom Wheatley
Velan
cover, Trim 8, HF stellited seats. WT
CA1-5R 2” - 3” 600# ANSI, CS body and cover (ASTM- AOP

Tom Wheatley
CA1-5R 4” and Larger 600# ANSI, CS body and cover (ASTM- Velan
KF
and 316 SS hex plug
Departamento: FIC
Piping Specification “CS1” Página No.: 69 de 135
CLASS: ANSI 600#

SERVICE: GP
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
SCH 80S SCH 40S SCH 60S
ASTM-A312 TP 304
ASTM-A182 F 304
FITTINGS SW BW
GATE CS1-1S, CS1-1Z N/A
BALL N/A CS1-2R
PLUG N/A
VALVES
GLOBE N/A CS1-4R

CHECK N/A CS1-5R, CS1-5RP
BUTTERFLY N/A
GAUGE DS1-9S N/A
NOTES: -20/100 1440
Departamento: FIC
ACCEPTABLE
BRANDS
GATE CS1-1S ¾” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
stellited seats, graphite packing. Hand Vogt
Test per API 598
CS1-1Z ¾” and Class 800# (2000# CWP), ASTM-A351 Gr

B16.11, OS&Y, Trim 12, bolted bonnet, solid
wedge gate, HF stellited seats, graphite
packing. Hand wheel operated. WT per API
BALL CS1-2R 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 SS AOP
body, ball and stem, RF flanged ends per Cameron
ANSI/ASME B16.5, top or end entry, TFE seat, Grove
reduced port, lever or gear (4” and larger) GWC (Trunnion)
operated. Trunnion mounted, double block and
bleed and sealant injection fittings. Fire safe
KF
per API 6FA. Test per API 598 Nibco
Nutron
CS1-2RF 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 SS PBV
body, ball and stem, RF flanged ends per Quadrant
ANSI/ASME B16.5, top or end entry, TFE seat, TK
full port, lever or gear (4” and larger) operated. WKM
Trunnion mounted, double block and bleed
and sealant injection fittings. Fire safe per API
6FA. Test per API 598
GLOBE CS1-4R 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 Crane
API 598 Walworth
CHECK CS1-5R 2” - 3” 600# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, RF flanged ends per Crane
bolted cover, Trim 12, HF stellited seats. KF Eagle
WT per API 600/602. Test per API 598 Newco
PBV
CS1-5R 4” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 Tom Wheatley
SS body, RF flanged ends per Velan
bolted cover, Trim 12, HF stellited seats. Wheatley
Body drains ½” NPT. WT per API
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK CS1-5RP 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 KF Eagle
SS body, RF flanged ends per Norriseal
piston and spring, HF stellited seats. Test
per API 598
NEEDLE DS1-6S 1” and 2000 PSI @ 400 °F, bar stock body (316 AGCO
seat, peek seat material Apollo
KF
DS1-6SFM 1” and 2000 PSI @ 400 °F, bar stock body (316 Swagelok
Smaller SS), FM x FM threaded ends, teflon stem
seat, peek seat material
GAUGE DS1-9S ¾” and 4000 PSI @ 500 °F, bar stock body (316 AGCO
port, teflon packing, metal seat, complete Swagelok
with bleeder valve and 316 SS plug
Departamento: FIC
CLASS: ANSI 600#

SERVICE: GP, PL
SS, RF
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10
ASTM-A312 TP 316
ASTM-A182 F 316
FITTINGS SW BW
GATE CS1-1S, CS1-1Z N/A
BALL N/A CS2-2R
PLUG N/A
VALVES
GLOBE N/A CS2-4R

CHECK N/A CS2-5R, CS2-5RP
BUTTERFLY N/A
GAUGE DS1-9S N/A
NOTES: -20/100 1440
Departamento: FIC
ACCEPTABLE
BRANDS
GATE CS1-1S ¾” and Class 800# (2000# CWP), ASTM-A351 Bonney Forge
stellited seats, graphite packing. Hand Vogt
Test per API 598
CS1-1Z ¾” and Class 800# (2000# CWP), ASTM-A351 Gr

packing. Hand wheel operated. WT per API
BALL CS2-2R 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 SS AOP
body, ball and stem, RF flanged ends per Cameron
ANSI/ASME B16.5, top or end entry, TFE seat, Grove
operated. Trunnion mounted, double block and
bleed and sealant injection fittings. Fire safe
KF
per API 6FA. Test per API 598 Nibco
Nutron
CS2-2RF 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 PBV
TFE seat, full port, lever or gear (4” and WKM
larger) operated. Trunnion mounted,
injection fittings. Fire safe per API 6FA.
Test per API 598
GLOBE CS2-4R 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 Crane
API 598 Walworth
CHECK CS2-5R 2” - 3” 600# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, RF flanged ends per Crane
WT per API 600/602. Test per API 598 Newco
PBV
CS2-5R 4” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 Tom Wheatley
SS body, RF flanged ends per Velan
bolted cover, Trim 12, HF stellited seats. Wheatley
Body drains ½” NPT. WT per API
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK CS2-5RP 2” and Larger 600# ANSI, ASTM-A351 Gr CF8M or 316 KF Eagle
SS body, RF flanged ends per Norriseal
piston and spring, HF stellited seats. Test
per API 598
KF
Departamento: FIC
Piping Specification “CX1” Página No.: 75 de 135
CLASS: ANSI 600#

SERVICE: OP, WP
CS, RF
SIZE 1/2 3/4 1 1 1/2 8 10 122 16 4 20 246
SCH 160 SCH 80
ASTM-A106 GR B, GALV
ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)
FITTINGS THD/SW FE
GATE CX1-1S, CX1-1Z CX1-1R, CX1-1RSG
VALVES (Note 6)
BALL CA1-2S, CA1-2Z CX1-2R

PLUG N/A
GLOBE CX1-4S, CX1-4Z CX1-4R
CHECK CX1-5S, CX1-5Z CX1-5R
NEEDLE DA1-6S, DA1-6SFM N/A
BUTTERFLY N/A
GAUGE DA1-9S N/A
NOTES: -20/100 1480

6. Valves for corrosive applications should be supplied with the appropriate internal
valve coating and trim, and it’s could be Plasite 7159 or Enduro Bond
Departamento: FIC
ACCEPTABLE
BRANDS
GATE CX1-1S 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or Bonney Forge
Smaller ASTM A-182 Gr 316 SS body and bonnet, DSI
threaded ends per ANSI/ASME B1.20.1, Newco
OS&Y, Trim 12, bolted bonnet, solid Smith
wedge gate, HF stellited seats, graphite Velan
CX1-1Z 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or

Smaller ASTM A-182 Gr 316 SS body and bonnet,
socket weld ends per ANSI/ASME
B16.11, OS&Y, Trim 12, bolted bonnet,
solid wedge gate, HF stellited seats,
graphite packing. Hand wheel operated.
CX1-1R 2” – 3” 600# ANSI, CS body and bonnet (ASTM- Bonney Forge

wedge gate, Trim 8 and HF stellited seats. Velan
CX1-1R 4” and Larger 600# ANSI, CS body and bonnet (ASTM-

A216 Gr WCB or ASTM-A105), internally
wedge gate, Trim 8 and HF stellited seats.
Gear operated. WT per API 600/602. Test
per API 598
CX1-1RSG 2” and Larger 600#, CS body (ASTM-A216 Gr WCB or M&J

ASTM-A105), internally coated, RF Foster
flanged ends, API-6D, full port, through- WKM
conduit, bolted bonnet, rising stem,
nonrising hand wheel, slab gate with
floating seats for corrosive service, fire
tested API 6FA. Hand wheel or gear (4”
and larger) operated

Quadrant
Departamento: FIC
ACCEPTABLE
BRANDS
BALL CA1-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP
ANSI/ASME B1.20.1, full port, lever Nibco
Quadrant
CA1-2ZF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr WKM
per ANSI/ASME B16.11, full port, lever
Test per API 598
CX1-2R 2” and Larger 600# ANSI, CS body (ASTM-A216 Gr AOP

WCB or ASTM-A105), internally coated, Cameron
RF flanged ends per ANSI/ASME B16.5, Grove
operated, 316 SS ball and stem. Trunnion KF
per API 598 PBV
Quadrant
CX1-2RF 2” and Larger 600# ANSI, CS body (ASTM-A216 Gr TK
WCB or ASTM-A105), internally coated, WKM
sealant injection fittings. Fire safe. Test
per API 598
GLOBE CX1-4S 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or Bonney Forge

Smaller ASTM A-182 Gr 316 SS body and bonnet, DSI
threaded ends per ANSI/ASME B1.20.1, Newco
OS&Y, Trim 12, bolted bonnet, HF Smith
CX1-4Z 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or

Smaller ASTM A-182 Gr 316 SS body and bonnet,
B16.11, OS&Y, Trim 12, bolted bonnet,
HF stellited seats. Hand wheel operated.
CX1-4R 2” and Larger 600# ANSI, CS body and bonnet (ASTM- Crane
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK CX1-5S 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or AOP
Smaller ASTM A-182 Gr 316 SS body and cover, Bonney Forge
threaded ends per ANSI/ASME B1.20.1, DSI
horizontal swing, threaded or bolted KF Eagle
cover, Trim 12. WT per API 600/602. Test Newco
per API 598 Tom Wheatley
Velan
CX1-5Z 1 ½” and Class 1500#, ASTM-A351 Gr CF8M or Vogt
Smaller ASTM A-182 Gr 316 SS body and cover, Wheatley
B16.11, horizontal swing, threaded or
bolted cover, Trim 12. WT per API
CX1-5R 2” - 3” 600# ANSI, CS body and cover (ASTM- AOP

B16.5, horizontal swing, bolted cover, KF Eagle
Trim 12. WT per API 600/602. Test per Newco
API 598 PBV
Tom Wheatley
CX1-5R 4” and Larger 600# ANSI, CS body and cover (ASTM- Velan
coated, RF flanged ends per ANSI/ASME Wheatley
B16.5, horizontal swing, bolted cover,
Trim 12. Body drain ½” NPT. WT per API
KF
DA1-6SFM 1” and 6000 PSI @ 200 °F, bar stock body (316 Swagelok
GAUGE DA1-9S 3/4” and 6000 PSI @ 200 °F, bar stock body (316 AGCO
hex plug
Departamento: FIC
Piping Specification “DA1” Página No.: 79 de 135
CLASS: ANSI 900#

SERVICE: GP
CS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 12 10
16 20 24
SCH 160 SCH 80 SCH 120
PIPE
PE BE, SMLS
(Note 4)
FLANGES 1500# RTJ, SW 900# RTJ, WN
ASTM-A105
FITTINGS SW BW
GATE DA1-1S, DA1-1Z DA1-1J
BALL DA1-2S, DA1-2Z DA1-2J
VALVES (Note 2)
PLUG N/A
GLOBE DA1-4S, DA1-4Z DA1-4J
CHECK DA1-5S, DA1-5Z DA1-5J
DA1-6S N/A
NEEDLE
DA1-6SFM
BUTTERFLY N/A
GAUGE DA1-9S N/A
CHOKE N/A DA1-0JC N/A
PRESS./TEMP. RATINGS
1500# / 900# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated
GASKETS °F PSIG
coated (Flexitallic or Lamons) REF. ANSI/ASME B16.5
NOTES: -20/100 2220
2. DA1-1SC, DA1-2SS, DA1-2SC, DA1-4SC, DA1-5SC may be used for vent, drain, 300 1970
sample and instrument service only 400 1900
4. All welds in WT over 0.750” to be stress relieved
Departamento: FIC
ACCEPTABLE
BRANDS
GATE DA1-1S 1 ½” and Class 1500# (3705# CWP), CS body Bonney Forge
Smaller and bonnet, (ASTM-A105), threaded DSI
Trim 8, bolted bonnet, solid wedge gate, Smith
DA1-1Z 1 ½” and Class 1500# (3705# CWP), CS body

Smaller and bonnet, (ASTM-A105), socket weld
ends per ANSI/ASME B16.11, OS&Y,
Trim 8, bolted bonnet, solid wedge gate,
HF stellited seats. Hand wheel operated.
DA1-1J 2” – 3” 900# ANSI, CS body and bonnet Bonney Forge

RTJ flanged ends per ANSI/ASME DSI
B16.5, OS&Y, bolted bonnet, solid Newco
seats, enclosed stem protector. Hand Vogt
wheel operated. WT per API 600/602. Walworth
Test per API 598
DA1-1J 4” and Larger 900# ANSI, CS body and bonnet

RTJ flanged ends per ANSI/ASME
B16.5, OS&Y, bolted bonnet, solid
seats, enclosed stem protector. Gear
operated. WT per API 600/602. Test per
API 598
BALL DA1-2S 1 ½” and 2220 PSI @ 100 °F, ASTM-A351 Gr AOP

Quadrant
DA1-2Z 1 ½” and 2220 PSI @ 100 °F, ASTM-A351 Gr WKM
DA1-2SF 1 ½” and 2220 PSI @ 100 °F, ASTM-A351 Gr

Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL DA1-2ZF 1 ½” and 2220 PSI @ 100 °F, ASTM-A351 Gr AOP
Quadrant
WKM
DA1-2J 2” and Larger 900# ANSI, CS body (ASTM-A216 Gr AOP
WCB or ASTM-A105), RTJ flanged ends Cameron
lever or gear (4” and larger) operated, GWC (Trunnion)
CS ENP ball and stem. Trunnion KF
per API 598 PBV
Quadrant
DA1-2JF 2” and Larger 900# ANSI, CS body (ASTM-A216 Gr
TK
WCB or ASTM-A105), RTJ flanged ends WKM
ball and stem. Trunnion mounted,
598
GLOBE DA1-4S 1 ½” and Class 1500# (3705# CWP), CS body Bonney Forge
Smaller and bonnet (ASTM-A105), threaded DSI
Trim 8, bolted bonnet, HF stellited seats. Smith
DA1-4Z 1 ½” and Class 1500# (3705# CWP), CS body

Smaller and bonnet (ASTM-A105), socket weld
ends per ANSI/ASME B16.11, OS&Y,
Trim 8, bolted bonnet, HF stellited seats.
Hand wheel operated. WT per API
DA1-4J 2” and Larger 900# ANSI, CS body and bonnet Crane

RTJ flanged ends per ANSI/ASME Newco
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK DA1-5S 1 ½” and Class 1500# (3705# CWP), CS body AOP
Smaller (ASTM-A105), steel plate cover, threaded Bonney Forge
ends per ANSI/ASME B1.20.1, horizontal DSI
swing, screwed or bolted cover, Trim 12, KF Eagle
Velan
DA1-5Z 1 ½” and Class 1500# (3705# CWP), CS body Vogt
horizontal swing, screwed or bolted cover,
Trim 12, HF stellited seats. WT per API
DA1-5J 2” - 3” 900# ANSI, CS body and cover (ASTM- AOP

A216 Gr WCB or ASTM-A105), RTJ Crane
horizontal swing, bolted cover, Trim 8, HF KF Eagle
stellited seats. WT per API 600/602. Test Newco
per API 598 PBV
Tom Wheatley
DA1-5J 4” and Larger 900# ANSI, CS body and cover (ASTM- Velan
A216 Gr WCB or ASTM-A105), RTJ Walworth
horizontal swing, bolted cover, Trim 8, HF
stellited seats. Body drain ½” NPT. WT per
KF
hex plug
CHOKE DA1-0J 1” – 10” 900# ANSI, CS body (ASTM-A216 GR Master Flo

WCB or ASTM-A105), SS TRIM, RTJ
Flanged ends, buna-N Seals.
TECHNICAL DATA: CV Max. Temp
Operation. Max Press Operation
Departamento: FIC
Piping Specification “DS1” Página No.: 83 de 135
CLASS: ANSI 900#

SERVICE: GP
SS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
ASTM-A312 TP 304
ASTM-A182 F 304
FITTINGS SW BW
GATE DS1-1S, DS1-1Z N/A
BALL DS1-2J
PLUG N/A
VALVES
GLOBE DS1-4J N/A

CHECK N/A DS1-5J, DS1-5JP
BUTTERFLY N/A
GAUGE DS1-9S N/A
900# RTJ, Oval Ring, Stainless Steel material, Annealed (Flexitallic or
GASKETS °F PSIG
Lamons) REF. ANSI/ASME B16.5
NOTES: -20/100 2160
Departamento: FIC
ACCEPTABLE
BRANDS
GATE DS1-1S ¾” and Class 1500# (3705# CWP), ASTM-A351 Bonney Forge
stellited seats, graphite packing. All Vogt
elastomeric seats and seals must be ED
resistant. Hand wheel operated. WT per
DS1-1Z ¾” and Class 1500# (3705# CWP), ASTM-A351 Gr

packing. All elastomeric seats and seals must
be ED resistant. Hand wheel operated. WT per
BALL DS1-2J 1 ½” and 900# ANSI, ASTM-A351 Gr CF8M or 316 KF

Smaller SS body, ball and stem, RTJ flanged ends Nutron
per ANSI/ASME B16.5, filled TFE seat, PBV
reduced port, lever operated. All WKM
resistant. Fire safe per API 607. Test per
API 598
DS1-2JF 1 ½” and 900# ANSI, ASTM-A351 Gr CF8M or 316

Smaller SS body, ball and stem, RTJ flanged ends
per ANSI/ASME B16.5, filled TFE seat,
full port, lever operated. All elastomeric
seats and seals must be ED resistant.
Fire safe per API 607. Test per API 598
DS1-2J 2” and Larger 900# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, ball and stem, RTJ flanged ends Cameron
per ANSI/ASME B16.5, top or end entry, Grove
TFE seat, reduced port, lever or gear (4” GWC (Trunnion)
and larger) operated. All elastomeric KF
seats and seals must be ED resistant. Nibco
Trunnion mounted, double block and Nutron
bleed and sealant injection fittings. Fire PBV
safe per API 6FA. Test per API 598 Quadrant
TK
DS1-2JF 2” and Larger 900# ANSI, ASTM-A351 Gr CF8M or 316 WKM
SS body, ball and stem, RTJ flanged ends
per ANSI/ASME B16.5, top or end entry,
TFE seat, reduced port, lever or gear (4”
and larger) operated. All elastomeric
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE DS1-4J 1 ½” and 900# ANSI, ASTM-A351 Gr CF8M or 316 Bonney Forge
Smaller SS body and bonnet, RTJ flanged ends DSI
per ANSI/ASME B16.5, OS&Y, bolted Newco
bonnet, Trim 12, HF stellited seats. All Smith
elastomeric seats and seals must be ED Velan
resistant. Hand wheel operated. WT per Vogt
CHECK DS1-5J 2” - 3” 900# ANSI, ASTM-A351 Gr CF8M or 316 AOP

SS body, RTJ flanged ends per Crane
All elastomeric seats and seals must be Newco
ED resistant. WT per API 600/602. Test PBV
Velan
DS1-5J 4” and Larger 900# ANSI, ASTM-A351 Gr CF8M or 316 Walworth
SS body, RTJ flanged ends per Wheatley
bolted cover, Trim 12, HF stellited seats.
All elastomeric seats and seals must be
ED resistant. Body drains ½” NPT. WT
DS1-5JP 2” and Larger 900# ANSI, ASTM-A351 Gr CF8M or 316 KF Eagle

SS body, RTJ flanged ends per Norriseal
piston and spring, HF stellited seats. All
resistant. Test per API 598
KF
Departamento: FIC
CLASS: ANSI 900#

SERVICE: GP
SS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
PIPE PE BE
ASTM-A790 UNS S31803 Duplex SS, SMLS
ASTM-A182 F 51
FITTINGS SW BW
ASTM-A182 F 51 ASTM-A815 UNS S31803
GATE N/A
DS3-2S, DS3-2ZS
BALL DS3-2J
DS3-2J
VALVES
PLUG N/A
GLOBE N/A
CHECK N/A DS3-5J, DS3-5JP
NEEDLE DS1-6S, DS1-6SFM
BUTTERFLY N/A
GAUGE DS1-9S
BOLTING Bolts: ASTM-A320 GR L7M
GASKETS °F PSIG
NOTES: -20/100 2250
3. For ANSI Pipe Schedules, see ATTACHMENT H 500 1730
Departamento: FIC
ACCEPTABLE
BRANDS
BALL DS3-2S ¾” and Smaller 3000# WOG, forged duplex SS body, KF
duplex SS ball and stem, threaded ends per Nutron
ANSI/ASME B1.20.1, reduced port, lever PBV
operated, filled TFE seat. All elastomeric WKM
seats and seals must be ED resistant. Fire
safe per API 607. Test per API 598
DS3-2Z ¾” and Smaller 3000# WOG, forged duplex SS body,

duplex SS ball and stem, socket weld ends
per ANSI/ASME B16.11, reduced port, lever
operated, filled TFE seat. All elastomeric
DS3-2SF ¾” and Smaller 3000# WOG, forged duplex SS body,

duplex SS ball and stem, threaded ends per
DS3-2ZF ¾” and Smaller 3000# WOG, forged duplex SS body,

DS3-2J 1 ½” and Smaller 900# ANSI, duplex SS body, ball and stem,
RTJ flanged ends per ANSI/ASME B16.5,
filled TFE seat, reduced port, lever
operated. All elastomeric seats and seals
must be ED resistant. Fire safe per API 607.
Test per API 598
DS3-2JF 1 ½” and Smaller 900# ANSI, duplex SS body, ball and stem,
filled TFE seat, full port, lever operated. All
API 598
DS3-2J 2” and Larger 900# ANSI, duplex SS body, ball and stem, KF
RTJ flanged ends per ANSI/ASME B16.5, Nutron
top or end entry construction, Fire safe seat, PBV
reduced port, lever or gear (4" and larger) Velan
operated. All elastomeric seats and seals WKM
must be ED resistant. Trunnion mounted,
injection fittings. Fire safe per API 6FA. Test
per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL DS3-2JF 2” and Larger 900# ANSI, duplex SS body, ball and stem, KF
RTJ flanged ends per ANSI/ASME B16.5, Nutron
top or end entry construction, Fire safe seat, PBV
full port, lever or gear (4" and larger) Velan
operated. All elastomeric seats and seals WKM
must be ED resistant. Trunnion mounted,
injection fittings. Fire safe per API 6FA. Test
per API 598
CHECK DS3-5J 2” - 3” 900# ANSI, duplex SS body and trim, RTJ KF Eagle
flanged ends per ANSI/ASME B16.5, Tom Wheatley
horizontal swing, bolted cover, HF stellited Velan
seats, horizontal or vertical upward service,
fire safe bonnet. All elastomeric seats and
seals must be ED resistant. WT per API
DS3-5J 4” and Larger 900# ANSI, duplex SS body and trim, RTJ
horizontal swing, bolted cover, HF stellited
fire safe bonnet. All elastomeric seats and
seals must be ED resistant. Body drain ½”
598
DS3-5JP 2” and Larger 900# ANSI, duplex SS body and trim, RTJ KF Eagle
flanged ends per ANSI/ASME B16.5, bolted Norriseal
cap, piston check, HF stellited seats. All Tom Wheatley
NEEDLE DS1-6S 1” and Smaller 2000 PSI @ 400 °F, bar stock body (316 AGCO
KF
DS1-6SFM 1” and Smaller 2000 PSI @ 400 °F, bar stock body (316 Swagelok
GAUGE DS1-9S ¾” and Smaller 4000 PSI @ 500 °F, bar stock body (316 AGCO
Departamento: FIC
Piping Specification “EA1” Página No.: 89 de 135
CLASS: ANSI 1500#

SERVICE: GP, WP
CS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24
SCH 160 Calculate
PIPE
PE BE, SMLS
(Note 5)
ASTM-A105
FITTINGS SW BW
GATE EA1-1S, EA1-1Z EA1-1J
VALVES (Note 2)
BALL EA1-2S, EA1-2Z EA1-2J

PLUG N/A
GLOBE EA1-4S, EA1-4Z EA1-4J, EA1-4W
CHECK EA1-5S, EA1-5Z EA1-5J
NEEDLE DA1-6S N/A
BUTTERFLY N/A
GAUGE DA1-9S N/A
CHOKE N/A EA1-0JC N/A
1500# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
GASKETS °F PSIG
(Flexitallic or Lamons) REF. ANSI/ASME B16.5
NOTES: -20/100 3705

2. 1/2" and 3/4", EA1-1SC, EA1-2SC, EA1-4SC, EA1-5SC and XXS nipples may be 300 3280
used for vent, drain, sample and instrument service only 400 3170
5. All welds in WT over 0.750” to be stress relieved
Departamento: FIC
ACCEPTABLE
BRANDS
GATE EA1-1S 1 ½” and 3705 PSIG min @ 100 °F, CS body and bonnet Bonney Forge
Smaller (ASTM-A105), threaded ends per ANSI/ASME DSI
B1.20.1, OS&Y, Trim 12, bolted or welded Newco
bonnet, solid wedge gate, HF stellited seats. Smith
Hand wheel operated. WT per API 600/602. Velan
EA1-1Z 1 ½” and 3705 PSIG min @ 100 °F, CS body and bonnet
Smaller (ASTM-A105), socket weld ends per
ANSI/ASME B16.11, OS&Y, Trim 12, bolted or
welded bonnet, solid wedge gate, HF stellited
seats. Hand wheel operated. WT per API
EA1-1J 2” – 3” 1500# ANSI, CS body and bonnet (ASTM-A216 Bonney Forge

Gr WCB or ASTM-A105), RTJ flanged ends per Crane
ANSI/ASME B16.5, OS&Y, bolted bonnet, solid DSI
wedge gate, Trim 12 and HF stellited seats, Newco
enclosed stem protector. Hand wheel operated. Velan
Walworth
EA1-1J 4” and Larger 1500# ANSI, CS body and bonnet (ASTM-A216
Gr WCB or ASTM-A105), RTJ flanged ends per
ANSI/ASME B16.5, OS&Y, bolted bonnet, solid
wedge gate, Trim 12 and HF stellited seats,
enclosed stem protector. Gear operated. WT
BALL EA1-2S 1 ½” and 3000# MAWP, CS body (ASTM-A105), AOP

Smaller threaded ends per ANSI/ASME B1.20.1, Apollo
reduced port, lever operated, 316 SS ball and KF
stem, filled teflon seats. Fire safe. Test per API Nibco
598 Nutron
PBV
EA1-2Z 1 ½” and 3000# MAWP, CS body (ASTM-A105), socket Quadrant
Smaller welded ends per ANSI/ASME B16.11, reduced WKM
port, lever operated, 316 SS ball and stem, filled
teflon seats. Fire safe. Test per API 598
EA1-2SF 1 ½” and 3000# MAWP, CS body (ASTM-A105),

Smaller threaded ends per ANSI/ASME B1.20.1, full
port, lever operated, 316 SS ball and stem, filled
EA1-2ZF 1 ½” and 3000# MAWP, CS body (ASTM-A105), socket

Smaller welded ends per ANSI/ASME B16.11, full port,
lever operated, 316 SS ball and stem, filled
Departamento: FIC
ACCEPTABLE
BRANDS
BALL EA1-2J 2” and Larger 1500# ANSI, CS body (ASTM-A216 Gr WCB or AOP
ASTM-A105), RTJ flanged ends per Cameron
ANSI/ASME B16.5, reduced port, lever or gear Grove
(4” and larger) operated, 316 SS ball and stem. GWC (Trunnion)
Trunnion mounted, double block and bleed and KF
sealant injection fittings. Fire safe. Test per API Nibco
598 Nutron
PBV
EA1-2JF 2” and Larger 1500# ANSI, CS body (ASTM-A216 Gr WCB or Quadrant
ASTM-A105), RTJ flanged ends per TK
ANSI/ASME B16.5, full port, lever or gear (4” WKM
and larger) operated, 316 SS ball and stem.
Trunnion mounted, double block and bleed and
sealant injection fittings. Fire safe. Test per API
598
GLOBE EA1-4S 1 ½” and Class 1500# (3700# CWP), CS body and Bonney Forge
Smaller bonnet (ASTM-A105), threaded ends per DSI
ANSI/ASME B1.20.1, OS&Y, Trim 12, bolted Newco
bonnet, HF stellited seats. Hand wheel Smith
operated. WT per API 600/602. Test per API Velan
598 Vogt
EA1-4Z 1 ½” and Class 1500# (3700# CWP), CS body and

Smaller bonnet (ASTM-A105), socket weld ends per
ANSI/ASME B16.11, OS&Y, Trim 12, bolted
bonnet, HF stellited seats. Hand wheel
operated. WT per API 600/602. Test per API
598
EA1-4J 2” and Larger 1500# ANSI, CS body and bonnet (ASTM-A216 Crane
Gr WCB or ASTM-A105), RTJ flanged ends per DSI
ANSI/ASME B16.5, OS&Y, bolted bonnet, Trim Newco
12 and HF stellited seats. Hand wheel operated. Powell
Walworth
EA1-4W 2” and Larger 1500# ANSI, CS body and bonnet (ASTM-A216
Gr WCB or ASTM-A105), BW ends, SCH 160,
OS&Y, bolted bonnet, Trim 12, HF stellited seat.
Hand wheel operated. WT per API 600/602.
Test per API 598
CHECK EA1-5S 1 ½” and Class 1500# (3700# CWP), CS body (ASTM- AOP
Smaller A105), steel plate cover, threaded ends per Bonney Forge
ANSI/ASME B1.20.1, horizontal swing, screwed DSI
or bolted cover, Trim 12. WT per API 600/602. KF Eagle
Test per API 598 Newco
Tom Wheatley
Velan
Vogt
Wheatley
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK EA1-5Z 1 ½” and Class 1500# (3700# CWP), CS body AOP
Smaller (ASTM-A105), steel plate cover, socket weld Bonney Forge
ends per ANSI/ASME B16.11, horizontal DSI
swing, screwed or bolted cover, Trim 12. WT KF Eagle
per API 600/602. Test per API 598 Newco
Tom Wheatley
Velan
Vogt
Wheatley
EA1-5J 2” - 3” 1500# ANSI, CS body and cover (ASTM- AOP

A216 Gr WCB or ASTM-A105), RTJ flanged Crane
ends per ANSI/ASME B16.5, horizontal DSI
swing, bolted cover, Trim 8, HF stellited KF Eagle
seats. WT per API 600/602. Test per API 598 Newco
PBV
EA1-5J 4” and Larger 1500# ANSI, CS body and cover (ASTM- Tom Wheatley
A216 Gr WCB or ASTM-A105), RTJ flanged Velan
ends per ANSI/ASME B16.5, horizontal Walworth
swing, bolted cover, Trim 8, HF stellited Wheatley
seats. Body drain ½” NPT. WT per API
SS), M x FM threaded ends, teflon stem seat, AOP
soft or hard seats Apollo
KF
Swagelok
SS), one male and three female, needle port, AOP
teflon stem seat, soft seat material, complete Swagelok
with bleeder valve and 316 SS hex plug
CHOKE EA1-0J 1” – 10” 1500# ANSI, CS body (ASTM-A216 Gr WCB Master Flo
or ASTM-A105), SS trim, RTJ fanged ends,
buna-N seals
TECHNICAL DATA: CV Max. Temp
Operation. Max Press Operation
Departamento: FIC
Piping Specification “ES1” Página No.: 93 de 135
CLASS: ANSI 1500#

SERVICE: GP
SS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
SCH 160S
ASTM-A312 TP 304
ASTM-A182 F 304
FITTINGS SW BW
GATE N/A
BALL ES1-2J
PLUG N/A
VALVES
GLOBE N/A
CHECK N/A ES1-5J, ES1-5JP
BUTTERFLY N/A
GAUGE DS1-9S N/A
GASKETS °F PSIG
NOTES: -20/100 3600
Departamento: FIC
ACCEPTABLE
BRANDS
BALL ES1-2J 1 ½” and 1500# ANSI, ASTM-A351 Gr CF8M or KF
Smaller 316 SS body, ball and stem, RTJ flanged Nutron
ends per ANSI/ASME B16.5, filled TFE PBV
seat, reduced port, lever operated. All WKM
API 598
ES1-2JF 1 ½” and 1500# ANSI, ASTM-A351 Gr CF8M or

Smaller 316 SS body, ball and stem, RTJ flanged
ends per ANSI/ASME B16.5, filled TFE
seat, full port, lever operated. All
API 598
ES1-2J 2” and Larger 1500# ANSI, ASTM-A351 Gr CF8M or AOP

316 SS body, ball and stem, RTJ flanged Cameron
ends per ANSI/ASME B16.5, top or end Grove
entry, TFE seat, reduced port, lever or GWC (Trunnion)
gear (4” and larger) operated. All KF
elastomeric seats and seals must be ED Nibco
resistant. Trunnion mounted, double block Nutron
and bleed and sealant injection fittings. PBV
Fire safe per API 6FA. Test per API 598 Quadrant
TK
ES1-2JF 2” and Larger 1500# ANSI, ASTM-A351 Gr CF8M or WKM
316 SS body, ball and stem, RTJ flanged
ends per ANSI/ASME B16.5, top or end
entry, TFE seat, full port, lever or gear (4”
and larger) operated. All elastomeric
CHECK ES1-5J 2” - 3” 1500# ANSI, ASTM-A351 Gr CF8M or AOP

316 SS body, RTJ flanged ends per Crane
All elastomeric seats and seals must be Newco
ED resistant. WT per API 600/602. Test PBV
Velan
ES1-5J 4” and Larger 1500# ANSI, ASTM-A351 Gr CF8M or Walworth
316 SS body, RTJ flanged ends per Wheatley
All elastomeric seats and seals must be
ED resistant. Body drains ½” NPT. WT
Departamento: FIC
ACCEPTABLE
BRANDS
CHECK ES1-5JP 2” and Larger 1500# ANSI, ASTM-A351 Gr CF8M or KF Eagle
316 SS body, RTJ flanged ends per Norriseal
piston and spring, HF stellited seats. All
KF
Departamento: FIC
CLASS: ANSI 1500#

SERVICE: GP
SS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 3 4 6
SCH 80S SCH 120
PIPE PE BE
ASTM-A790 UNS S31803 Duplex SS, SMLS
ASTM-A182 F 51
FITTINGS SW BW
ASTM-A182 F 51 ASTM-A815 UNS S31803
GATE N/A
ES3-2S, ES3-2Z
BALL ES3-2J
ES3-2J
VALVES
PLUG N/A
GLOBE N/A
CHECK N/A ES3-5J, ES3-5JP
BUTTERFLY N/A
GAUGE DS1-9S N/A
BOLTING Bolts: ASTM-A320 GR L7M
GASKETS °F PSIG
NOTES: -20/100 3750
Departamento: FIC
ACCEPTABLE
BRANDS
BALL ES3-2S ¾” and Smaller 5000# WOG, forged duplex SS body, KF
duplex SS ball and stem, threaded ends per Nutron
ANSI/ASME B1.20.1, reduced port, lever PBV
operated, filled TFE seat. All elastomeric WKM
ES3-2Z ¾” and Smaller 5000# WOG, forged duplex SS body,

per ANSI/ASME B16.11, reduced port, lever
ES3-2SF ¾” and Smaller 5000# WOG, forged duplex SS body,

duplex SS ball and stem, threaded ends per
ES3-2ZF ¾” and Smaller 5000# WOG, forged duplex SS body,

ES3-2J 1 ½” and Smaller 1500# ANSI, duplex SS body, ball and

stem, RTJ flanged ends per ANSI/ASME
B16.5, filled TFE seat, reduced port, lever
Test per API 598
ES3-2JF 1 ½” and Smaller 1500# ANSI, duplex SS body, ball and

stem, RTJ flanged ends per ANSI/ASME
B16.5, filled TFE seat, full port, lever
Test per API 598
ES3-2J 2” and Larger 1500# ANSI, duplex SS body, ball and KF

stem, RTJ flanged ends per ANSI/ASME Nutron
B16.5, top or end entry construction, Fire PBV
safe seat, reduced port, lever or gear (4" Velan
and larger) operated. All elastomeric seats WKM
and seals must be ED resistant. Trunnion
sealant injection fittings. Fire safe per API
Departamento: FIC
ACCEPTABLE
BRANDS
BALL ES3-2JF 2” and Larger 1500# ANSI, duplex SS body, ball and KF
stem, RTJ flanged ends per ANSI/ASME Nutron
B16.5, top or end entry construction, Fire PBV
safe seat, full port, lever or gear (4" and Velan
larger) operated. All elastomeric seats and WKM
seals must be ED resistant. Trunnion
CHECK ES3-5J 2” - 3” 1500# ANSI, duplex SS body and trim, RTJ KF Eagle
flanged ends per ANSI/ASME B16.5, Tom Wheatley
horizontal swing, bolted cover, HF stellited Velan
Fire safe bonnet. All elastomeric seats and
seals must be ED resistant. WT per API
ES3-5J 4” and Larger 1500# ANSI, duplex SS body and trim, RTJ
horizontal swing, bolted cover, HF stellited
Fire safe bonnet. All elastomeric seats and
seals must be ED resistant. Body drain ½”
598
ES3-5JP 2” and Larger 1500# ANSI, duplex SS body and trim, RTJ KF Eagle
flanged ends per ANSI/ASME B16.5, bolted Norriseal
cap, piston check, HF stellited seats. All Tom Wheatley
NEEDLE DS1-6S 1” and Smaller 2000 PSI @ 400 °F, bar stock body (316 AGCO
KF
DS1-6SFM 1” and Smaller 2000 PSI @ 400 °F, bar stock body (316 Swagelok
GAUGE DS1-9S ¾” and Smaller 4000 PSI @ 500 °F, bar stock body (316 AGCO
Departamento: FIC
Piping Specification “EX1” Página No.: 99 de 135
CLASS: ANSI 1500#

SERVICE: OP, WP
CS, RTJ
SIZE 1/2 3/4 1 1-1/2 2 4 6 8 10 12 16 20 24
SCH 160 Calculate
PIPE PE, GALV T&C FE, SMLS
ASTM-A106 GR B, GALV
ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)
6000# Wall Thickness to Match Pipe
FITTINGS SW FE
GATE Use Ball
VALVES (Note 6)
BALL EX1-2S, EX1-2Z EX1-2J

PLUG N/A
GLOBE EX1-4S, EX1-4Z EX1-4J
CHECK EX1-5S, EX1-5Z EX1-5J
NEEDLE DA1-6S N/A
BUTTERFLY N/A
GAUGE DA1-9S N/A
GASKETS Type R, Octagonal Ring, Soft Iron, Cadmium Plated °F PSIG
REF. ANSI/ASME B16.5
NOTES: -20/100 3705

3. 1/2" and 3/4", EX1-2SM, EX1-4SM, EX1-5SM and XXS nipples may be used for vent, 400 3170
drain, sample and instrument service only. 500 2995
4. Flanges shall be used in lieu of unions
6. Valves for corrosive applications should be supplied with the appropriate internal valve
coating and trim, and it’s could be Plasite 7159 or Enduro Bond
Departamento: FIC
ACCEPTABLE
BRANDS
BALL EX1-2S 1-1/2” and 3375 PSI @ 200 °F, monel body, ball and KF
Smaller stem, threaded ends per ANSI/ASME Nutron
B1.20.1, reduced port, lever operated, filled PBV
teflon seats. Fire safe. Test per API 598 WKM
EX1-2Z 1-1/2” and 3375 PSI @ 200 °F, monel body, ball and
Smaller stem, socket weld ends per ANSI/ASME
B1.20.1, reduced port, lever operated, filled
EX1-2SF 1-1/2” and 3375 PSI @ 200 °F, monel body, ball and
Smaller stem, threaded ends per ANSI/ASME
B1.20.1, full port, lever operated, filled teflon
seats. Fire safe. Test per API 598
EX1-2ZF 1-1/2” and 3375 PSI @ 200 °F, monel body, ball and
Smaller stem, socket weld ends per ANSI/ASME
B1.20.1, full port, lever operated, filled teflon
seats. Fire safe. Test per API 598
EX1-2J 2” and 1500# ANSI, CS body (ASTM-A216 Gr AOP

Larger WCB or ASTM-A105)), internally coated, Cameron
RTJ flanged ends per ANSI/ASME B16.5, Grove
operated, 316 SS ball and stem. Trunnion KF
sealant injection fittings. Fire safe per API Nutron
6FA. Test per API 598 PBV
Quadrant
EX1-2JF 2” and 1500# ANSI, CS body (ASTM-A216 Gr TK
Larger WCB or ASTM-A105)), internally coated, WKM
GLOBE EX1-4S 1-1/2” and Class 1500# (3700# CWP), monel body and Bonney Forge
Smaller bonnet, threaded ends per ANSI/ASME DSI
B1.20.1, OS&Y, Trim 12, bolted bonnet, HF Newco
stellited seats. Hand wheel operated. WT Smith
per API 600/602. Test per API 598 Velan
Vogt
EX1-4Z 1-1/2” and Class 1500# (3700# CWP), monel body and
Smaller bonnet, socket weld ends per ANSI/ASME
B1.20.1, OS&Y, Trim 12, bolted bonnet, HF
Departamento: FIC
ACCEPTABLE VENDOR
MODELS
GLOBE EX1-4J 2” and Larger 1500# ANSI, CS body and bonnet Crane
internally coated, RTJ flanged ends per Newco
ANSI/ASME B16.5, OS&Y, bolted bonnet, Powell
Trim 12 and HF stellited seats. Hand Velan
wheel operated. WT per API 600/602. Walworth
Test per API 598
CHECK EX1-5S 1-1/2” and Class 1500# (3700# CWP), monel body, Bonney Forge
Smaller threaded ends per ANSI/ASME B1.20.1, KF Eagle
horizontal swing, screwed or bolted cover, Tom Wheatley
Trim 12. WT per API 600/602. Test per Velan
API 598
EX1-5Z 1-1/2” and Class 1500# (3700# CWP), monel body,

Smaller socket weld ends per ANSI/ASME
B1.20.1, horizontal swing, screwed or
bolted cover, Trim 12. WT per API
EX1-5J 2” - 3” 1500# ANSI, CS body and cover (ASTM- AOP

coated, RTJ flanged ends per DSI
ANSI/ASME B16.5, horizontal swing, KF Eagle
bolted cover, Trim 12, HF stellited seats. Newco
WT per API 600/602. Test per API 598 PBV
Tom Wheatley
EX1-5J 4” and Larger 1500# ANSI, CS body and cover (ASTM- Velan
coated, RTJ flanged ends per Wheatley
Body drain ½” NPT. WT per API 600/602.
Test per API 598
KF
Swagelok
hex plug
Departamento: FIC
Piping Specification “FA1” Página No.: 102 de 135
CLASS: ANSI 2500#

SERVICE: GF1
CS, RTJ
SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18
SCH XXS 0.80 1.00 1.375 1.625 1.875 2.125 2.375 2.625
PIPE PE BE, SMLS
(Note 1) ASTM-A106
ASTM-A106 GR C, API-5L GR X60
GR B
FLANGELOK 2500#
SERIES WN
ASTM-A350 GR LF6 CL 2
SW BE
FITTINGS
ASTM-A234 GR WPC, MSS SP-75 WPHY-60, SMLS
ASTM-A105
Quenched & Tempered
GATE N/A FA1-1J
FA1-2X1
BALL FA1-2S FA1-2J, FA1-2JF
FA1-2X2
VALVES
PLUG N/A
GLOBE N/A
CHECK N/A H5J
NEEDLE FA1-6S N/A
BUTTERFLY N/A
GAUGE FA1-9S N/A
2500# RTJ, Oval Ring, Stainless Steel material, Annealed (Flexitallic or FLANGELOK SEAL RING
GASKETS
Lamons) Bore to Match Pipe
NOTES: °F PSIG
1. Threaded piping and valves (3/4” max) are allowed on instrument connections only -20/100 6250
A flanged isolation valve is to be installed upstream of the threaded connections 200 6250
Threaded piping to be SCH XXS (3/4” max) 300 6070
3. The MDMT must be verified for all ASTM-106 B/C, API-5L X60, ASTM-A105 and
ASTM-A234 WPC materials with a wall thickness greater than 0.500”.
4. Vents and drains shall be 2” flanged.
Departamento: FIC
ACCEPTABLE
VENDOR MODELS
GATE FA1-1J 2” 2500# ANSI (6250 PSIG @ 100 °F / Bonney Forge
6000 PSIG @ 300 °F), CS body and Edwards
bonnet (ASTM-A350 GR LF3), RTJ KF
OS&Y, bolted bonnet, solid wedge gate,
Trim 8 and HF stellited seats, enclosed
stem protector. Hand wheel operated.
FA1-1J 3” and Larger 2500# ANSI (6250 PSIG @ 100 °F /

6000 PSIG @ 300 °F), CS body and
bonnet (ASTM-A350 GR LF3), RTJ
OS&Y, bolted bonnet, solid wedge gate,
Trim 8 and HF stellited seats, enclosed
stem protector. Gear operated. WT per
BALL FA1-2S 3/4” and Smaller 10000# CWP (6250 PSIG @ 100 °F / Alco
6000 PSIG @ 300 °F), compact valve, FMC
CS body, bolt-on female NPT Jamesbury
connections on both ends, lever
operated, bolted body construction, 316
SS ball and stem, replaceable seat,
Peek soft seat, EPDM seals, block and
bleed. All elastomeric seats and seals
must be ED resistant. Fire safe per API
FA1-2X1 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F /

6000 PSIG @ 300 °F), compact valve,
CS body, bolt-on female SW connection
on one end and bolt-on ½” FNPT
connection on other end, lever
operated, bolted body construction, 316
SS ball and stem, replaceable seat,
Peek soft seat, EPDM seals, block and
bleed. All elastomeric seats and seals
must be ED resistant. Fire safe per API
FA1-2X2 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F /

6000 PSIG @ 300 °F), compact valve,
CS body, bolt-on female SW connection
on one end and bolt-on blind flange on
other end, lever operated, bolted body
construction, 316 SS ball and stem,
replaceable seat, Peek soft seat, EPDM
seals, block and bleed. All elastomeric
Fire safe per API 6FA. Test per API 598
Departamento: FIC
ACCEPTABLE
VENDOR MODELS
BALL FA1-2J 2” and Larger 2500# ANSI (6250 PSIG @ 100 °F / Cameron
6000 PSIG @ 300 °F), CS body Grove
(ASTM-A350 GR LF3), RTJ flanged KF
ends per ANSI/ASME B16.5, reduced Nutron
port, gear operated, bolted body PBV
construction, 316 SS ball and stem. All TK
elastomeric seats and seals must be
ED resistant. Trunnion mounted, double
API 598
FA1-2JF 2” and Larger 2500# ANSI (6250 PSIG @ 100 °F /

6000 PSIG @ 300 °F), CS body
(ASTM-A350 GR LF3), RTJ flanged
ends per ANSI/ASME B16.5, full port,
gear operated, bolted body
construction, 316 SS ball and stem. All
elastomeric seats and seals must be
ED resistant. Trunnion mounted, double
API 598
CHECK FA1-5J 2” - 3” 2500# ANSI (6250 PSIG @ 100 °F / KF

6000 PSIG @ 300 °F), CS body Tom Wheatley
(ASTM-A350 GR LF3), RTJ flanged Wheatley
ends per ANSI/ASME B16.5, horizontal
swing, bolted bonnet, Trim 12, HF
stellited seats. All elastomeric seats and
seals must be ED resistant. Removable
disc and seat. WT per API 600/602. Fire
safe per API 6FD. Test per API 598
FA1-5J 4” and Larger 2500# ANSI (6250 PSIG @ 100 °F /

6000 PSIG @ 300 °F), CS body
(ASTM-A350 GR LF3), RTJ flanged
ends per ANSI/ASME B16.5, horizontal
swing, bolted bonnet, Trim 12, HF
stellited seats. All elastomeric seats and
seals must be ED resistant. Body drain
½” NPT and removable disc and seat.
WT per API 600/602. Fire safe per API
6FD. Test per API 598
NEEDLE FA1-6S 1” and Smaller 10000# CWP, bar stock body (316SS), AGCO
M x FM threaded ends, teflon packing AOP
with peek seat material Apollo
KF
Swagelok
Departamento: FIC
ACCEPTABLE
VENDOR MODELS
GAUGE FA1-9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), AGCO
one male and three female, needle port, AOP
teflon stem seat, integral seat, complete Swagelok
with bleeder valve and 316 SS plugs
Departamento: FIC
Piping Specification “FS1” Página No.: 106 de 135
CLASS: ANSI 2500#

SERVICE: GF2
SS, HUB
SIZE 1/2 3/4 1 1½ 2 3 4 6
SCH XXS SCH 160 SCH XXS
PIPE PE BE, SMLS
ASTM-A790 GR UNS S31803 DUPLEX SS
Size 1in/4 1in/5 1½in/11 2in/16 3in/25 4in/34 6in/52
PN H30104 H30108 H30112 H31504 H30203 H30303 H30403 H30605
HUBS
Desc. TECHLOK HUB, BW
Mat. ASTM-A182 F 51
Size 1in 1 ½in 2in 3in 4in 6in
PN CS401 CS415 CS402 CS403 CS404 CS406
CLAMPS
Desc. TECHLOK CLAMP WITH BOLTING
Mat. ASTM-A182 F 304
FITTINGS SW BE
GATE N/A
BALL FS1-2GF FS1-2G, FS1-2GF
PLUG N/A
VALVES
GLOBE N/A
CHECK FS1-5G
NEEDLE FS1-6S N/A
BUTTERFLY N/A
GAUGE FS1-9S N/A
BOLTING Bolts: ASTM-A193 GR B8
(Note 2) Nuts: ASTM-A194 GR 8
Size 1in/4 1in/5 1½in/11 2in/16 3in/25 4in/34 6in/52
PN R22004 R22005 R22011 R22016 R22025 R22034 R22052
SEALS
Desc. TECHLOK SEAL RING
Mat. SS AISI 630 (17-4 PH), PTFE Coated
NOTES: °F PSIG
1. Valve elastomers in contact with process fluids shall be suitable for exposure to wet -20/100 6250
Carbon Dioxide. 200 6000
500 4800
Departamento: FIC
ACCEPTABLE
VENDOR MODELS
BALL FS1-2G 2” and Larger 2500# ANSI, duplex body, ball and Cameron
seats (ASTM-A890 GR 5A), duplex FMC
stem and trunnion (ASTM-A182 F51), Grove
Techlok Hub ends (hub bore to match KF
pipe ID), reduced port, gear operated, PBV
bolted body construction, peek seat TK
inserts, EPDM seals. Trunnion
FS1-2GF 1 ½” and Smaller 2500# ANSI, duplex body, ball and FMC
stem (ASTM-A890 GR 5A), Techlok Nutron
Hub ends (hub bore to match pipe ID), TK
full port, lever operated, teflon seals.
Floating ball. Fire safe per API 607.
Test per API 598
2” and Larger 2500# ANSI, duplex body, ball and Cameron

seats (ASTM-A890 GR 5A), duplex FMC
stem and trunnion (ASTM-A182 F51), Grove
Techlok Hub ends (hub bore to match KF
pipe ID), full port, gear operated, bolted PBV
body construction, peek seat inserts, TK
EPDM seals. Trunnion mounted, double
API 598
CHECK FS1-5G 1 ½” and Smaller 2500# ANSI, duplex body and trim KF
(ASTM-A890 GR 5A), Techlok Hub Tom Wheatley
ends (hub bore to match pipe ID), Wheatley
horizontal swing, bolted bonnet, PTFE
seals, HF stellited seats. All elastomeric
2” - 3” 2500# ANSI, duplex SS body and trim

(ASTM-A182 F51 or ASTM-A890 GR
4A), Techlok Hub ends (hub bore to
match pipe ID), swing check, horizontal
or vertical service, bolted bonnet, HF
stellited seats, PTFE seals. Removable
disc and seat. WT per API 600/602. Fire
safe per API 6FD. Test per API 598
Departamento: FIC
ACCEPTABLE
VENDOR MODELS
CHECK FS1-5G 4” and Larger 2500# ANSI, duplex SS body and trim KF
(ASTM-A182 F51 or ASTM-A890 GR Tom Wheatley
4A), Techlok Hub ends (hub bore to Wheatley
match pipe ID), swing check, horizontal
or vertical service, bolted bonnet, HF
stellited seats, PTFE seals. Body drain
½” NPT and removable disc and seat.
WT per API 600/602. Fire safe per API
6FD. Test per API 598
NEEDLE FS1-6S 1” and Smaller 10000# CWP, bar stock body (316SS), AGCO
M x FM threaded ends, teflon packing AOP
with peek seat material Apollo
KF
Swagelok
GAUGE FS1-9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), AGCO
one male and three female, needle port, AOP
teflon stem seat, integral seat, complete Swagelok
with bleeder valve and 316 SS plugs
Departamento: FIC
Piping Specification “HA1” Página No.: 109 de 135
CLASS: ANSI 150#

SERVICE: AI, AU, WF, WU
CS, RF
SIZE 1/4 3/4 1 2 3 3 1/2 4 6 8 10 12 16 20 24
SCH 80 SCH STD
PIPE THD/PE, SMLS BE, ERW
(Note 3)
ASTM-A53 GR B, GALV T&C ASTM-A53 GR B, API-5L GR B
FLANGES 150# RF, THD 150# RF, WN
ASTM-A105, GALV T&C ASTM-A105
3000# Wall Thickness to Match Pipe
FITTINGS THD BE
ASTM-A105, GALV ASTM-A234 GR WPB
GATE CA1-1S, CA1-1Z HA1-1R
BALL CA1-2S, CA1-2Z HA1-2R
PLUG N/A
VALVES
GLOBE CA1-4S, CA1-4Z HA1-4R

CHECK CA1-5S, CA1-5Z HA1-5R
DA1-6S
NEEDLE N/A
DA1-6SFM
BUTTERFLY N/A HA1-7RL, HA1-7RW
GAUGE DA1-9S
NOTES: -20/100 285
1. Plugs shall be round head (Galvanized) 200 260
2. All galvanized piping shall be painted externally after fabrication according to 300 230
Specification: B15-ECU-20-SP-001 “Above ground external / internal coating and 400 200
galvanizing” 500 170
Departamento: FIC
ACCEPTABLE
BRANDS
GATE CA1-1S 3” and Smaller Class 800# (2000# CWP), CS body and Bonney Forge
bonnet, (ASTM-A105), threaded ends DSI
CA1-1Z 3” and Smaller Class 800# (2000# CWP), CS body and

bonnet, (ASTM-A105), socket weld ends
HA1-1R 3 ½” – 4” 150# ANSI, CS body and bonnet Bonney Forge

HA1-1R 6” and Larger 150# ANSI, CS body and bonnet

Test per API 598
BALL CA1-2S 3” and Smaller 1480 PSI @ 100 °F, ASTM-A351 Gr AOP
CF8M or ASTM A-182 Gr 316 SS body, Apollo
Quadrant
CA1-2Z 3” and Smaller 1480 PSI @ 100 °F, ASTM-A351 Gr WKM
CF8M or ASTM A-182 Gr 316 SS body,
CA1-2SF 3” and Smaller 1480 PSI @ 100 °F, ASTM-A351 Gr

CF8M or ASTM A-182 Gr 316 SS body,
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
BALL CA1-2ZF 3” and Smaller 1480 PSI @ 100 °F, ASTM-A351 Gr AOP
CF8M or ASTM A-182 Gr 316 SS body, Apollo
Quadrant
WKM
HA1-2R 3 ½” – 6” 150# ANSI, CS body (ASTM-A216 Gr AOP

lever or gear (6”) operated, CS ENP ball GWC (Trunnion)
and stem. Floating ball. Fire safe. Test KF
per API 598 Nibco
Nutron
HA1-2RF 3 ½” – 6” 150# ANSI, CS body (ASTM-A216 Gr PBV
WCB or ASTM-A105), RF flanged ends Quadrant
per ANSI/ASME B16.5, full port, lever or TK
gear (6”) operated, CS ENP ball and WKM
API 598
HA1-2R 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

HA1-2RF 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

operated, CS ENP ball and stem.
GLOBE CA1-4S 3” and Smaller Class 800# (2000# CWP), CS body and Bonney Forge
bonnet (ASTM-A105), threaded ends DSI
CA1-4Z 3” and Smaller Class 800# (2000# CWP), CS body and

bonnet (ASTM-A105), socket weld ends
Test per API 598
Departamento: FIC
ACCEPTABLE
BRANDS
GLOBE HA1-4R 3 ½” and Larger 150# ANSI, CS body and bonnet Crane
API 598
CHECK CA1-5S 3” and Smaller Class 800# (2000# CWP), CS body AOP
(ASTM-A105), steel plate cover, Bonney Forge
Velan
CA1-5Z 3” and Smaller Class 800# (2000# CWP), CS body Vogt
(ASTM-A105), steel plate cover, socket Wheatley
Test per API 598
HA1-5R 3 ½” 150# ANSI, CS body and cover (ASTM- AOP

Tom Wheatley
HA1-5R 4” and Larger 150# ANSI, CS body and cover (ASTM- Velan
KF
Departamento: FIC
ACCEPTABLE
BRANDS
BUTTERFLY HA1-7RL 3 ½” and Larger 200 PSI, CS body, lug to mate with RF Bray
KF
HA1-7RW 3 ½” and Larger 200 PSI, CS body, wafer to mate with Norris
RF flanges, according to API 609, SS Quadrant
stem, bronze or iron disc, buna seat.
Latch locking lever or gear (6” and
and 316 SS hex plug
Departamento: FIC
ATTACHMENT “A”. STRAINERS Página No.: 114 de 135
STRAINERS
A.1 TEMPORARY CONE STRAINERS
DESCRIPTION:
1. Type of Strainer Required

2. Line Size: 3/4” – 36”
3. Mating Flange Rating: 150# - 1500#
4. Flange face type: RF, FF, RTJ
5. Length Required. If necessary
6. Material of Construction
7. Wire Mesh & Material if required
Example:
TEMPORARY CONE STRAINERS FOR 10" LINE SIZE, 300#, FLANGE TYPE RF WITH 20 MESH
(1/32" OPENINGS). CS BODY. 316 SS MESH. MODEL: WEAMCO TYPE CWO
A.2 STRAINERS TYPE “Y”
DESCRIPTION:

2. Line Size: 3/4” – 36”
5. Mesh (Screen)
7. Body drain
Example:
STRAINER, TYPE "Y", 10" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN
(MESH 12), CS BODY. 2" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC,
TITAN
A.3 STRAINERS TYPE “BASKET”
DESCRIPTION:

2. Line Size: 3/4” – 36”
5. Mesh (Screen)
7. Body drain
Example:
BASKET STRAINER, 2" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN
(MESH 12), 316 SS BODY. 1" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC,
TITAN
Departamento: FIC
ATTACHMENT “B”. ACCESS FITTINGS Página No.: 115 de 135
ACCESS FITTINGS
B.1 FOR CHEMICAL INJECTION
DESCRIPTION:
ROHRBACK COSASCO MODEL 57. TWO-INCH SYSTEM ACCESS FITTING ASSEMBLIES WITH
SOLID PLUG, TEE BODY STYLE. MODEL: 57-141-2-72-S31600-1
B.2 FOR SAMPLES
DESCRIPTION:
ROHRBACK COSASCO MODEL 57. TWO-INCH SYSTEM ACCESS FITTING ASSEMBLIES WITH
SOLID PLUG, NON TEE BODY STYLE. MODEL: 57-141-0-72-S31600-1
Departamento: FIC
ATTACHMENT “B”. ACCESS FITTINGS Página No.: 116 de 135
Departamento: FIC
ATTACHMENT “C”. INSULATING KITS Página No.: 117 de 135
INSULATING KITS
DESCRIPTION:
2" INSULATING KIT, ANSI 300# RF, PIKOTEK VCS TYPE, G-10 GASKET, TEFLON (SPRING-
ENERGIZED) SEAL, WITH COMPLETE SET OF GRE INSULATING FULL LENGHT SLEEVES, GRE
INSULATING WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF). MODEL: 2-300VCS-
T/G
Departamento: FIC
ATTACHMENT “C”. INSULATING KITS Página No.: 118 de 135
Departamento: FIC
ATTACHMENT “D”. BLEED RINGS Página No.: 119 de 135
BLEED RINGS
DESCRIPTION:
BLEED RING, 4" DIAM RF, CLASS 300#, CS ASTM-A105, DRAINAGE ORIFICE 3/4" DIAM NPT
BLEED RINGS FOR ANSI 150 RF, 300 RF, 600 RF, 900 RF and 1500 RF
B
A FOR RF [in] WEIGHT FOR RF [Lb]
NPS FOR
[in] RF CL150 CL300 CL600 CL900 CL1500 CL150 CL300 CL600 CL900 CL1500
[in]
1 1 1/4 2 1/2 2 3/4 2 3/4 3 3 2 2 2 3 3
1 1/2 1 7/8 3 1/4 3 5/8 3 5/8 3 3/4 3 3/4 3 3 3 4 4
2 2 5/16 4 4 1/4 4 1/4 5 1/2 5 1/2 4 5 5 9 9
2 1/2 2 3/4 4 3/4 5 5 6 3/8 6 3/8 5 6 6 11 11
3 3 5/8 5 1/4 5 3/4 5 3/4 6 1/2 6 3/4 6 8 8 11 12
4 4 5/8 6 3/4 7 7 1/2 8 8 1/8 9 11 13 16 16
6 6 3/4 8 5/8 9 3/4 10 3/8 11 1/4 11 12 19 23 30 28
8 8 1/2 10 7/8 12 12 1/2 14 13 3/4 18 27 31 44 42
10 10 5/8 13 1/4 14 1/8 15 5/8 17 17 24 32 47 62 62
12 12 3/4 16 16 1/2 17 7/8 19 1/2 20 3/8 37 43 57 77 89
Departamento: FIC
ATTACHMENT “E”. VALVE BRANDS Página No.: 120 de 135
VALVE BRANDS
AA1-AX1-AY1-HA1 AL1 AS1 AS2

VALVE A105 / A216 A350 / A352 316 316 / 351
SIZE
TYPE 150# CS 150# CS LT 150# SS LT 150# SS
CLASS 800# / 150# ANSI - BALL 1480
Bonney Forge Bonney Forge Bonney Forge Bonney Forge
AA1-AS1-AS2-AX1
DSI DSI DSI DSI
AY1-HA1
Newco Newco Newco Newco
1 ½” and smaller
AL1 Smith Smith Smith Smith
¾” and smaller Velan Velan Velan Velan
Vogt Vogt Vogt Vogt
GATE

AA1-AS1-AS2-AX1 Crane Crane Crane Crane
AY1-HA1 DSI DSI DSI DSI
2" and larger Newco Newco Newco Newco
AL1 Velan Velan Velan Velan
1” and larger Vogt Vogt Vogt Vogt
Walworth Walworth Walworth Walworth
AOP AOP AOP
Apollo KF Apollo
AA1-AS2-AX1-AY1
KF Nibco KF
HA1
Nibco Nutron Nibco
1 ½” and smaller
AL1 Nutron PBV Nutron
¾” and smaller PBV WKM PBV
Quadrant Quadrant
WKM WKM
AOP AOP AOP AOP
BALL
Cameron Cameron Cameron Cameron

Grove Grove Flow-tek Flow-tek
AA1-AS2-AX1-AY1 GWC (Trunnion) GWC (Trunnion) Grove Grove
HA1
KF KF GWC (Trunnion) GWC (Trunnion)
2" and larger
Nibco Nibco KF KF
AL1
Nutron Nutron Nibco Nibco
1” and larger
AS1 PBV PBV Nutron Nutron
½” and larger Quadrant Quadrant PBV PBV
TK TK Quadrant Quadrant
WKM WKM TK TK
WKM WKM
Bonney Forge Bonney Forge Bonney Forge
DSI DSI DSI
AA1-AL1-AS2-AX1
Newco Newco Newco
AY1-HA1
Smith Smith Smith
1 ½” and smaller
Velan Velan Velan
GLOBE
Vogt Vogt Vogt

Crane Crane Crane Crane
DSI DSI DSI DSI
AA1-AL1-AS1-AS2
AX1-AY1-HA1
Powell Powell Powell Powell
2" and larger
Velan Velan Velan Velan
Departamento: FIC
AA1-AX1-AY1-HA1 AL1 AS1 AS2

VALVE A105 / A216 A350 / A352 316 316 / 351
SIZE
TYPE 150# CS 150# CS LT 150# SS LT 150# SS
CLASS 800# / 150# ANSI - BALL 1480
AOP AOP
Bonney Forge Bonney Forge
DSI DSI
AA1- AS2-AX1-AY1 KF Eagle KF Eagle
HA1 Newco Newco
1 ½” and smaller Tom Wheatley Tom Wheatley
Velan Velan
CHECK SWING
Vogt Vogt
Wheatley Wheatley
AOP AOP AOP AOP
DSI DSI DSI DSI
AA1- AS1-AS2-AX1
KF Eagle KF Eagle KF Eagle KF Eagle
AY1-HA1
2" and larger
AL1 PBV PBV PBV PBV
1” and larger Tom Wheatley Tom Wheatley Tom Wheatley Tom Wheatley
Wheatley Wheatley Wheatley Wheatley
Bonney Forge
AL1 DSI
PISTON
CHECK
1 ½” and smaller Smith

Vogt
KF Eagle KF Eagle
AL1-AS1
Norriseal Norriseal
2" and larger
Tom Wheatley Tom Wheatley
Crane Crane
WAFER
CHECK
AL1-AS1 KF Eagle KF Eagle

2" and larger Tom Wheatley Tom Wheatley
Wheatley Wheatley
AGCO AGCO AGCO AGCO
NEEDLE
AA1-AL1-AS1-AS2 AOP AOP AOP AOP

AX1-AY1-HA1 Apollo Apollo Apollo Apollo
1” and Smaller KF KF KF KF
Swagelok Swagelok Swagelok Swagelok
Bray Keystone Bray Bray
Center Line Posi-Seal Center Line Center Line
BUTTERFLY
AA1-AS1-AS2-AY1 Demco WKM Demco Demco

2" and Larger Flowseal Flowseal Flowseal
AL1-HA1 Keystone Keystone Keystone
3" and Larger KF KF KF
Norris Norris Norris
Quadrant Quadrant Quadrant
AA1 APCO
FOOT
2" and Larger Flomatic
AA1-AL1-AS1-AS2 AGCO AGCO AGCO AGCO
AX1-AY1-HA1 AOP AOP AOP AOP
GAUGE
3/4” and Smaller Swagelok Swagelok Swagelok Swagelok
Departamento: FIC
BA1-BX1 BL1 BS1-BS2

VALVE A105 / A216 A350 / A352 316 / 351
SIZE
TYPE 300# CS 300# CS LT 300# SS LT
CLASS 800# / 300# ANSI - BALL 1480
BA1-BS1-BS2-BX1 DSI DSI DSI
1 ½” and smaller Newco Newco Newco
BL1 Smith Smith Smith
¾” and smaller Velan Velan Velan
Vogt Vogt Vogt
GATE

Crane Crane Crane
BA1-BS1-BS2-BX1
DSI DSI DSI
2" and larger
Newco Newco Newco
BL1
1” and larger Velan Velan Velan
Vogt Vogt Vogt
Walworth Walworth Walworth
AOP AOP
Apollo KF
BA1-BX1 KF Nibco
1 ½” and smaller Nibco Nutron
BL1 Nutron PBV
¾” and smaller PBV WKM
Quadrant
WKM
AOP AOP AOP
BALL
Cameron Cameron Cameron

Grove Grove Flow-tek
BA1-BX1 GWC (Trunnion) GWC (Trunnion) Grove
2" and larger KF KF GWC (Trunnion)
BL1 Nibco Nibco KF
1” and larger Nutron Nutron Nibco
BS1-BS2 PBV PBV Nutron
½” and larger Quadrant Quadrant PBV
TK TK Quadrant
WKM WKM TK
WKM
DSI DSI
BA1-BL1-BX1 Newco Newco
1 ½” and smaller Smith Smith
Velan Velan
GLOBE
Vogt Vogt
Crane Crane Crane
BA1-BL1-BX1 DSI DSI DSI
2" and larger Newco Newco Newco
BS1-BS2 Powell Powell Powell
½” and larger Velan Velan Velan
Departamento: FIC
BA1-BX1 BL1 BS1-BS2

VALVE A105 / A216 A350 / A352 316 / 351
SIZE
TYPE 300# CS 300# CS LT 300# SS LT
CLASS 800# / 300# ANSI - BALL 1480
AOP
Bonney Forge
DSI
KF Eagle
BA1-BX1
Newco
1 ½” and smaller
Tom Wheatley
Velan
CHECK SWING
Vogt
Wheatley
AOP AOP AOP
Crane Crane Crane
DSI DSI DSI
BA1-BS1-BS2-BX1 KF Eagle KF Eagle KF Eagle
2" and larger Newco Newco Newco
BL1 PBV PBV PBV
1” and larger Tom Wheatley Tom Wheatley Tom Wheatley
Velan Velan Velan
Wheatley Wheatley Wheatley
Bonney Forge
BL1 DSI
PISTON
CHECK

Vogt
KF Eagle KF Eagle
BL1-BS1-BS2
Norriseal Norriseal
2" and larger
Crane
WAFER
CHECK
BL1 KF Eagle
2" and larger Tom Wheatley
Wheatley
AGCO AGCO AGCO
NEEDLE
BA1-BL1-BS1-BS2 AOP AOP AOP

BX1 Apollo Apollo Apollo
1” and Smaller KF KF KF
Swagelok Swagelok Swagelok
Bray Keystone
Center Line Posi-Seal
BUTTERFLY
BA1 Demco WKM

2" and Larger Flowseal
BL1 Keystone
3" and Larger KF
Norris
Quadrant
BA1-BL1-BS1-BS2 AGCO AGCO AGCO
BX1 AOP AOP AOP
GAUGE
3/4” and Smaller Swagelok Swagelok Swagelok
Departamento: FIC
CA1-CX1 CS1-CS2 DA1 DS1-DS3

VALVE A105 / A216 316 / 351 A105 / A216 316 / 351 / DUPLEX
SIZE
TYPE 600# CS 600# SS 900# CS 900# SS / AS
CLASS 800# / 600# ANSI - BALL 1480 CLASS 1500# / 900# ANSI – BALL 2220
CA1-DA1-CX1 DSI DSI DSI DSI
1 ½” and smaller Newco Newco Newco Newco
CS1-CS2-DS1 Smith Smith Smith Smith
¾” and smaller Velan Velan Velan Velan
Vogt Vogt Vogt Vogt
GATE

Crane Crane
DSI DSI
CA1-DA1-CX1
Newco Newco
2" and larger
Velan Velan
Vogt Vogt
Walworth Walworth
AOP AOP KF
Apollo Apollo Nutron
KF KF PBV
CA1-CX1-DA1-DS1
Nibco Nibco WKM
DS3
Nutron Nutron
1 ½” and smaller
PBV PBV
Quadrant Quadrant
WKM WKM
AOP AOP AOP AOP
BALL
Cameron Cameron Cameron Cameron

Grove Grove Grove Grove
GWC (Trunnion) GWC (Trunnion) GWC (Trunnion) GWC (Trunnion)
CA1-CX1-CS1-CS2 KF KF KF KF
DA1-DS1-DS3 Nibco Nibco Nibco Nibco
2" and larger Nutron Nutron Nutron Nutron
PBV PBV PBV PBV
Quadrant Quadrant Quadrant Quadrant
TK TK TK TK
WKM WKM WKM WKM
DSI DSI DSI
CA1-CX1-DA1-DS1 Newco Newco Newco
1 ½” and smaller Smith Smith Smith
Velan Velan Velan
GLOBE
Vogt Vogt Vogt

Crane Crane Crane
DSI DSI DSI
CA1-CX1-CS1-CS2
Newco Newco Newco
DA1
Powell Powell Powell
2" and larger
Velan Velan Velan
Departamento: FIC
CA1 CS1-CS2 DA1 DS1-DS3

VALVE A105 / A216 316 / 351 A105 / A216 316 / 351 / DUPLEX
SIZE
TYPE 600# CS 600# CS 900# CS 900# SS / AS
CLASS 800# / 600# ANSI - BALL 1480 CLASS 1500# / 900# ANSI – BALL 2220
AOP AOP
DSI DSI
KF Eagle KF Eagle
CA1-CX1-DA1
Newco Newco
1 ½” and smaller
Velan Velan
CHECK SWING
Vogt Vogt
Wheatley Wheatley
AOP AOP AOP AOP
DSI DSI DSI DSI
KF Eagle KF Eagle KF Eagle KF Eagle
CA1-CX1-CS1-CS2
DA1-DS1-DS3
PBV PBV PBV PBV
2" and larger
Tom Wheatley Tom Wheatley Tom Wheatley Tom Wheatley
Wheatley Wheatley Wheatley Wheatley
KF Eagle KF Eagle
CHECK CS1-CS2-DS1-DS3
Norriseal Norriseal
PISTON 2" and larger
AGCO AGCO AGCO AGCO
NEEDLE
CA1-CX1-CS1-CS2 AOP AOP AOP AOP

DA1-DS1-DS3 Apollo Apollo Apollo Apollo
1” and Smaller KF KF KF KF
CA1-CX1-CS1-CS2 AGCO AGCO AGCO AGCO
DA1-DS1-DS3 AOP AOP AOP AOP
GAUGE
3/4” and Smaller Swagelok Swagelok Swagelok Swagelok
Departamento: FIC
EA1 ES1 ES3 EX1

VALVE A105 / A216 316 / 351 DUPLEX A105/A216 MONEL
SIZE
TYPE 1500# CS 1500# SS 1500# AS 1500# CS / AS
3705# / 1500# ANSI - BALL 3000
Bonney Forge
DSI
EA1 Newco
Velan
Vogt
GATE
Bonney Forge
Crane
DSI
EA1
Newco
2" and larger
Velan
Vogt
Walworth
AOP KF KF KF
Apollo Nutron Nutron Nutron
KF PBV PBV PBV
EA1-ES1-ES3-EX1 Nibco WKM WKM WKM
1 ½” and smaller Nutron
PBV
Quadrant
WKM
AOP AOP KF AOP
BALL
Cameron Cameron Nutron Cameron

Grove Grove PBV Grove
GWC (Trunnion) GWC (Trunnion) Velan GWC (Trunnion)
KF KF WKM KF
EA1-ES1-ES3-EX1
Nibco Nibco Nibco
2" and larger
Nutron Nutron Nutron
PBV PBV PBV
Quadrant Quadrant Quadrant
TK TK TK
WKM WKM WKM
DSI DSI
EA1-EX1 Newco Newco
1 ½” and smaller Smith Smith
Velan Velan
GLOBE
Vogt Vogt
Crane Crane
DSI DSI
EA1-EX1 Newco Newco
2" and larger Powell Powell
Velan Velan
Walworth Walworth
Departamento: FIC
EA1 ES1 ES3 EX1

VALVE A105 / A216 316 / 351 DUPLEX A105/A216 MONEL
SIZE
TYPE 1500# CS 1500# SS 1500# SS 1500# CS / AS
3705# / 1500# ANSI - BALL 3000
AOP Bonney Forge
Bonney Forge KF Eagle
DSI Tom Wheatley
KF Eagle Velan
EA1-EX1
Newco
1 ½” and smaller
Tom Wheatley
Velan
CHECK SWING
Vogt
Wheatley
AOP AOP KF Eagle AOP
Crane Crane Tom Wheatley Crane
DSI DSI Velan DSI
KF Eagle KF Eagle KF Eagle
EA1-ES1-ES3-EX1
Newco Newco Newco
DS1-DS3
PBV PBV PBV
2" and larger
Tom Wheatley Tom Wheatley Tom Wheatley
Velan Velan Velan
Wheatley Wheatley Wheatley
KF Eagle KF Eagle
CHECK ES1-ES3
Norriseal Norriseal
PISTON 2" and larger
AGCO AGCO AGCO AGCO
NEEDLE
AOP AOP AOP AOP

EA1-ES1-EX1
Apollo Apollo Apollo Apollo
1” and Smaller
KF KF KF KF
AGCO AGCO AGCO AGCO
EA1-ES1-EX1
AOP AOP AOP AOP
GAUGE 3/4” and Smaller
Departamento: FIC
FA1 FS1
VALVE A105 / A350 DUPLEX
SIZE
TYPE 2500# CS 2500# SS
2500# ANSI - BALL 10000
Bonney Forge
FA1
GATE Edwards
2" and larger
KFI
Alco FMC
FA1-FS1
FMC Nutron
1 ½” and smaller
Jamesbury TK
Cameron Cameron
BALL
Grove FMC
FA1-FS1 KF Grove
2" and larger Nutron KF
PBV PBV
TK TK
KF
FS1
Tom Wheatley
CHECK
1 ½” and smaller
Wheatley
KF KF
FA1-FS1
2" and larger
Wheatley Wheatley
AGCO AGCO
NEEDLE
AOP AOP
FA1-FS1
Apollo Apollo
1” and Smaller
KF KF
Swagelok Swagelok
AGCO AGCO
FA1-FS1
AOP AOP
GAUGE 3/4” and Smaller
Swagelok Swagelok
Departamento: FIC
ATTACHMENT “F”. GASKETS Página No.: 129 de 135
GASKETS
F.1 FOR CS SPECIFICATIONS (150#, 300# and 600#; RF)
DESCRIPTION:
3" GASKET, 300# RF, RING 1/8”, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE
(FG) WITH CS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS
STYLE WR OR GARLOCK STYLE RW)
F.2 FOR SS SPECIFICATIONS (150#, 300# and 600#; RF)
DESCRIPTION:
(FG) WITH SS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS
STYLE WR OR GARLOCK STYLE RW)
F.3 FOR CS SPECIFICATIONS (150#; FF)
DESCRIPTION:
3" GASKET, 150# FF, THK 1/8", COMP. NON-ASBESTOS, SYNTHETIC FIBER WITH NBR BINDER.
DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC, LAMONS OR GARLOCK)
F.4 FOR CS SPECIFICATIONS (900# and 1500#; RTJ)
DESCRIPTION:
3" GASKET, 1500# / 900# RTJ, OCTAGONAL RING, SOFT IRON MATERIAL, CADMIUM PLATED
COATED (FLEXITALLIC, LAMONS OR DAN-LOC)
F.5 FOR SS SPECIFICATIONS (900# and 1500#; RTJ)
DESCRIPTION:
3" GASKET, 1500# / 900# RTJ, OVAL RING, STAINLESS STEEL MATERIAL, ANNEALED
(FLEXITALLIC, LAMONS OR DAN-LOC)
F.6 FOR PIPELINES (300#; RF)
DESCRIPTION:
(FG) WITH CS OUTER AND INNER RING (FLEXITALLIC STYLE CGI, LAMONS STYLE WRI OR
GARLOCK STYLE RWI
Departamento: FIC
ATTACHMENT “G”. BOLTS DIMENSIONS Página No.: 130 de 135
BOLTS DIMENSIONS
150# RF 300# RF
# BOLTS
# BOLTS
STUD BOLT SIZE STUD BOLT SIZE
SIZE
SIZE
DIAM
DIAM
LG
LG
1/2" 4 1/2 2 1/2 1/2" 4 1/2 2 3/4
3/4" 4 1/2 2 1/2 3/4" 4 5/8 3
1" 4 1/2 2 3/4 1" 4 5/8 3 1/4
1 1/2" 4 1/2 3 1 1/2" 4 3/4 3 3/4
2" 4 5/8 3 1/4 2" 8 5/8 3 3/4
2 1/2" 4 5/8 3 1/2 2 1/2" 8 3/4 4
3" 4 5/8 3 3/4 3" 8 3/4 4 1/4
4" 8 5/8 3 3/4 4" 8 3/4 4 1/2
6" 8 3/4 4 6" 12 3/4 5
8" 8 3/4 4 1/4 8" 12 7/8 5 1/2
10" 12 7/8 4 3/4 10" 16 1 6 1/4
12" 12 7/8 4 3/4 12" 16 1 1/8 6 3/4
14" 12 1 5 1/4 14" 20 1 1/8 7
16" 16 1 5 1/2 16" 20 1 1/4 7 1/2
18" 16 1 1/8 6 18" 24 1 1/4 7 3/4
20" 20 1 1/8 6 1/4 20" 24 1 1/4 8 1/4
24" 20 1 1/4 7 24" 24 1 1/2 9 1/4
26" 24 1 1/4 7 1/4 26" 28 1 5/8 10 1/4
28" 28 1 1/4 7 1/4 28" 28 1 5/8 10 3/4
30" 28 1 1/4 7 1/2 30" 28 1 3/4 11 1/2
36" 32 1 1/2 8 1/2 36" 32 2 13
42" 36 1 1/2 9 42" 36 2 14
600# RF 900# RF/RTJ
# BOLTS
# BOLTS

SIZE
SIZE
DIAM
DIAM
LG
LG
1/2" 4 1/2 3 1/2" 4 3/4 4 1/4

3/4" 4 5/8 3 1/2 3/4" 4 3/4 4 1/2
1" 4 5/8 3 3/4 1" 4 7/8 5
1 1/2" 4 3/4 4 1/4 1 1/2" 4 1 5 1/2
2" 8 5/8 4 1/4 2" 8 7/8 5 3/4
2 1/2" 8 3/4 4 3/4 2 1/2" 8 1 6 1/4
3" 8 3/4 5 3" 8 7/8 5 3/4
4" 8 7/8 5 3/4 4" 8 1 1/8 6 3/4
6" 12 1 6 3/4 6" 12 1 1/8 7 3/4
8" 12 1 1/8 7 3/4 8" 12 1 3/8 8 3/4
10" 16 1 1/4 8 1/2 10" 16 1 3/8 9 1/4
12" 20 1 1/4 8 3/4 12" 20 1 3/8 10
14" 20 1 3/8 9 1/4 14" 20 1 1/2 11
16" 20 1 1/2 10 16" 20 1 5/8 11 1/2
18" 20 1 5/8 10 3/4 18" 20 1 7/8 13 1/4
20" 24 1 5/8 11 1/2 20" 20 2 14 1/4
24" 24 1 7/8 13 24" 20 2 1/2 18
Departamento: FIC
ATTACHMENT “G”. BOLTS DIMENSIONS Página No.: 131 de 135
BOLTS DIMENSIONS
1500# RTJ 2500# RTJ
# BOLTS
# BOLTS
SIZE
SIZE
DIAM
DIAM
LG
LG
1/2" 4 3/4 4 1/4 1/2" 4 3/4 4 3/4
3/4" 4 3/4 4 1/2 3/4" 4 3/4 5
1" 4 7/8 5 1" 4 7/8 5 1/2
1 1/2" 4 1 5 1/2 1 1/2" 4 1 1/8 6 3/4
2" 8 7/8 5 3/4 2" 8 1 7
2 1/2" 8 1 6 1/4 2 1/2" 8 1 1/8 8
3" 8 1 1/8 7 3" 8 1 1/4 9
4" 8 1 1/4 7 3/4 4" 8 1 1/2 10 1/4
6" 12 1 3/8 10 1/2 6" 8 2 14
8" 12 1 5/8 12 3/4 8" 12 2 15 1/2
10" 12 1 7/8 13 1/2 10" 12 2 1/2 20
12" 16 2 15 1/4 12" 12 2 3/4 22
14" 16 2 1/4 16 3/4
16" 16 2 1/2 18 1/2
18" 16 2 3/4 20 3/4
20" 16 3 22 1/4
24" 16 3 1/2 25 1/2
BOLTS DIMENSIONS FOR TECHLOK CONNECTIONS
2500# HUB
# BOLTS
STUD BOLT SIZE

SIZE
DIAM
LG
1/2" 4 1/2 3 1/2

3/4" 4 1/2 3 1/2
1" 4 1/2 3 1/2
1 1/2" 4 5/8 5
2" 4 3/4 5 1/4
3" 4 3/4 6 1/2
4" 4 7/8 7 1/2
6" 4 1 1/8 10 5/8
Departamento: FIC
ATTACHMENT “H”. ANSI PIPE SCHEDULES Página No.: 132 de 135
ANSI PIPE SCHEDULES (CS & SS) [in]
STD XS
PIPE
OD 10 10S 20 30 & 40 60 & 80 100 120 XXS 160
SIZE
40S 80S
½ 0.840 0.083 0.083 0.109 0.109 0.147 0.147 0.294 0.188
¾ 1.050 0.083 0.083 0.113 0.113 0.154 0.154 0.308 0.219
1 1.315 0.109 0.109 0.133 0.133 0.179 0.179 0.358 0.250
1¼ 1.660 0.109 0.109 0.140 0.140 0.191 0.191 0.382 0.250
1½ 1.900 0.109 0.109 0.145 0.145 0.200 0.200 0.400 0.281
2 2.375 0.109 0.109 0.154 0.154 0.218 0.218 0.436 0.344
2½ 2.875 0.120 0.120 0.203 0.203 0.276 0.276 0.552 0.375
3 3.500 0.120 0.120 0.216 0.216 0.300 0.300 0.600 0.438
4 4.500 0.120 0.120 0.237 0.237 0.281 0.337 0.337 0.438 0.674 0.531
6 6.625 0.134 0.134 0.203 0.280 0.280 0.432 0.432 0.562 0.684 0.719
8 8.625 0.148 0.148 0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.875 0.906
10 10.75 0.165 0.165 0.250 0.307 0.365 0.365 0.500 0.500 0.5940 0.719 0.844 1.000 1.125
12 12.75 0.180 0.180 0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.000 1.312
14 14.0 0.188 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.406
16 16.0 0.188 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.594
18 18.0 0.188 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.781
20 20.0 0.219 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.969
22 22.0 0.250 0.375 0.500 0.375 0.875 0.500 1.125 1.375 1.625 2.125
24 24.0 0.250 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.344
26 26.0 0.312 0.500 0.625 0.375 0.500
28 28.0 0.312 0.500 0.625 0.375
30 30.0 0.312 0.312 0.500 0.625 0.375 0.500
36 36.0 0.312 0.500 0.625 0.375 0.750 0.500
42 42.0 0.375 0.375 0.500 0.500
48 48.0 0.375 0.375 0.500 0.500
Departamento: FIC
ATTACHMENT “I”. INTERNALLY COATED Página No.: 133 de 135
INTERNALLY COATED
I.1 PLASITE 7159
Departamento: FIC
Departamento: FIC
I.2 ENDURO BOND
ENDURO-BONDTM Properties
An exceptional group of engineered thermal polymers allowing the process engineer greater versatility
TM
with a single material. ENDURO-BOND is characterized by flexibility and good retention of mechanical
properties. ENDURO-BONDTM meets the demands of the modern materials and corrosion engineer.
Dimensional Stability
Low coefficients of thermal expansion
Low creep
Low water absorption
Mechanical Properties
High strength
Wear resistant, excellent
High strength/weight ratio
Thermal Properties
Excellent long-term aging characteristics
Heat deflection temperatures greater than 500°F
Chemical Resistance
Stability at elevated temperatures.
Resistant to a broad range of solvents, mineral and organic
acids, alkalis and corrosive waters.
Processing
Highly predictable shrinkage for close tolerances

Piping Class CPF PDF

Uploaded by

Copyright:

Available Formats

Piping Class CPF PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Piping Class CPF PDF

Uploaded by

Copyright:

Available Formats

Departamento: FIC

Código No.: B15-CPF-50-SP-004

2.0 CODES AND RECOMMENDATIONS

3.0 GENERAL REQUIREMENTS

2.0 CÓDIGOS Y RECOMENDACIONES

3.0 REQUERIMIENTOS GENERALES

Cuando se usa soldadura de boquilla (socket weld), las uniones se deben

• 6” and larger ANSI 150 and 300

• 6” y mayores ANSI 150 y 300

5.0 PIPE SUPPORTS

5.0 SOPORTES DE TUBERÍA

8.0 PRESSURE TESTING

9.0 PAINTING AND COATINGS

10.0 THERMAL INSULATION

11.0 IDENTIFICATION OF PIPING AND VALVES

8.0 PRUEBAS DE PRESIÓN

9.0 PINTURA Y RECUBRIMIENTOS

10.0 AISLAMIENTO TÉRMICO

11.0 IDENTIFICACIÓN DE VÁLVULAS Y TUBERÍA

3” - GF - 1500 - AA1 - 00 Special (if required)

11.1.2 Line Service

3” - GF - 1500 - AA1 - 00 Especial (si se requiere)

11.1.2 Servicio de la línea

Service Abbreviation SPEC

TYPE FACING SPECIAL VALVE TYPE

STANDARD BRANCH CONNECTION CHART

T Butt Weld Tee

TIPO EXTREMOS VÁLVULA ESPECIAL

TABLA DE CONEXIONES PARA DERIVACIONES

T Tee soldable a tope

PIPING MATERIAL PIPING

CHECK CA1-5S, CA1-5Z AA1-5R

CA1-1Z 1 ½” and Class 800# (2000# CWP), CS body and

AA1-1R 2” – 4” 150# ANSI, CS body and bonnet Bonney Forge

AA1-1R 6” and Larger 150# ANSI, CS body and bonnet

BALL CA1-2S 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr AOP

CA1-2SF 1 ½” and 1480 PSI @ 100 °F, ASTM-A351 Gr

AA1-2R 2” – 6” 150# ANSI, CS body (ASTM-A216 Gr AOP

AA1-2R 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

AA1-2RF 8” and Larger 150# ANSI, CS body (ASTM-A216 Gr

CA1-4Z 1 ½” and Class 800# (2000# CWP), CS body and

CHECK CA1-5S 1 ½” and Class 800# (2000# CWP), CS body AOP

AA1-5R 2” - 3” 150# ANSI, CS body and cover (ASTM- AOP

CLASS: ANSI 150#

GLOBE BL1-4SLT AL1-4RLT N/A

AL1-1RLT 1” – 4” 150# ANSI, CS body (ASTM-A352 Gr Bonney Forge

AL1-1RLT 6” and Larger 150# ANSI, CS body (ASTM-A352 Gr

BL1-2SFLT ¾” and Smaller 1500# WOG, forged CS body (ASTM-

AL1-2RLT 1” - 6” 150# ANSI, CS body (ASTM-A352 Gr AOP

AL1-2RLT 12” and Larger 150# ANSI, CS body (ASTM-A352 Gr

AL1-2RFLT 12” and Larger 150# ANSI, CS body (ASTM-A352 Gr

AL1-4RLT 2” - 8” 150# ANSI, CS body (ASTM-A352 Gr Crane

AL1-5RPLT 1” - 1 ½” 150# ANSI, forged CS body (ASTM-350 Bonney Forge

AL1-5RPLT 2” - 8” 150# ANSI, CS body (ASTM-A352 Gr KF Eagle

AL1-5RWLT 2” - 24” 150# ANSI, CS body and cover (ASTM- Crane

CLASS: ANSI 150#

GLOBE N/A AS1-4RLT N/A

AS1-1RLT 2” – 4” 150# ANSI, 316 SS body, Trim 12, RF Bonney Forge

AS1-2RLT 8” - 10” 150# ANSI, 316 SS body, ball and stem,