Engine Honing Equipment Catalog PDF

ABOVE AND BEYOND HONING
Engine Honing Tooling

and Accessories
ABRASIVES | TOOLING | GAGING | FIXTURING | LUBRICANTS | ACCESSORIES
WWW. SUNNEN .COM A-7600

WE APPRECIATE THE OPPORTUNITY TO SERVE YOU…
Our Global World Class
Commitment Sunnen Abrasives
Sunnen began selling machines and accessories As the world’s foremost authority on honing, Sun-
internationally shortly after the company was nen has incorporated almost 90 years of research
founded in 1924. Headquartered in St. Louis, and development into a complete and top-quality
Missouri, Sunnen’s worldwide network includes line of honing abrasives.
more than 50 authorized distributors. Sunnen’s
Sunnen has a facility in St. Louis dedicated solely
international facilities extend to Switzerland, Italy,
to the research, development and manufacturing
the United Kingdom, Poland, Brazil, Belgium,
of abrasives, plated diamond tooling and honing
France, Russia, the Czech Republic and China. We
lubricants.
are committed to providing products and services
wherever they are needed in the world. With Sunnen abrasives, you get exactly what
you need, when you need it. Before any stone is
Since its beginning Sunnen has concentrated on
shipped, we grade and qualifiy it requiring it to
the technology of precision honing. Today we are
endure the most exacting quality-control standards
the largest, fully integrated company in this field
in the industry to assure you of the most precise
with more than 500 employees.
honing performance available today.
In this catalog we have assembled a comprehen-
sive guide on tooling, accessories and supplies
available for our extensive line of engine building
honing machines. The format makes it easy for
you to determine your needs and to order every-
thing required for your operation.
Of course, if you have questions, Sunnen’s
Customer Service is ready to help.
Sunnen takes pride in being an
organization of friendly, dedicated
people ... committed to serving
your needs.
Technical Expertise – Second to None
Sunnen’s Technical Center includes many of the
industry’s most knowledgeable honing and engine
building experts. To ensure superior precision and the
highest product quality, no other company in the Service in Your Shop
industry has the extensive complement of high-tech Sunnen’s factory-trained sales engineers and
equipment used in the development and testing of service specialists help get your new Sunnen
machines, tools and abrasives. equipment set up and running, and they fol-
low through to help solve technical problems,
train new operators and keep you up-to-date
on shop operations.
Built and Backed

by Sunnen
The Sunnen brand is your assurance of preci-
sion and quality. Sunnen tooling, abrasives,
honing fluids, bore gages and accessories
are designed to fit the specific requirements
of our equipment ... and to meet the high
standards that have made Sunnen Products
Company the world leader in honing technol-
ogy since 1924.
If You Have Questions or Need

Technical Assistance...
Just Call Toll Free (in the USA):
1-800-325-3670
Customers Outside the U.S.A.,
please Contact Your Local
Authorized Sunnen Distributor.
Sunnen equipment, accessories and supplies are sunnen.com
manufactured in our 45,150 sq. meter (486,000 sq. ft.)
plant equipped with the most advanced production
and quality control systems.
1
SUNNEN ENGINE REBUILDING EQUIPMENT…
For Nearly 90 Years Sunnen Has Been the Leader in Honing.

Whether for connecting rods, piston pin bores, cylinder or main bearing bores, we have the right
honing system for you.
Rod Reconditioning Cylinder Bore Reconditioning

Four systems, the LBB-1660 manual hone, ML-2000, The SV-10 and SV-20 are the standards in the
ML-4000 and the ML-5000 power stroked honing industry for cylinder bore honing in all types of
systems offer versatility and accuracy when honing engine blocks.
connecting rods.
OEM/Production Cylinder Honing Line Honing

Sunnen’s SV-2400 Series honing systems are a cost Sunnen’s dependable CH-100 is the best method
effective solution for production honing applications. for fast precision alignment of main bearing bores.
2
PERFECT FOR ALL YOUR ENGINE HONING NEEDS
Sunnen Leads the Table of Contents

Way in Automotive Honing Products
Honing Equipment
with: Cylinder Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
• A complete line of External Hones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
honing systems for Valve Guide (Honall®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
connecting rods, piston
pin bores, cylinder or
main bearing bores Connecting Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-21
Honing Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
• Tooling and fixturing, Machine Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
including custom CRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
fixturing, for all your SRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
engine honing needs Keyway Hones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Abrasives and diamond Honing Oils & Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
tooling
• Honing oils and water Block Reconditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-48
based coolants DH-Series Diamond Honing System Tooling & Accessories . . . . . . . . . . . . 22-23
• Electronic and SV-10/SV-20/SV-400/SV-2400/CV/CK Tooling & Accessories . . . . . . . . . . . . . 24-36
mechanical bore gages CH-100 & Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-39
Portable Hones & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-48
• A nationwide team
of factory-trained
representatives with Gaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-62
solutions to your
equipment needs
• Personal customer
service for fast, easy
ordering
• Technical advice and
field service that is
second to none
Check the Table of
Contents for Tooling
For our complete line of non-honing
and Accessories to accessories and supplies
Fit Your Machine and see catalog # A-7650.
Application.
sunnen.com
3
Online Ordering 24/7
Place your orders online @

www.sunnen.com
4 1-800-325-3670
External Hones & Accessories
External Hone Sets External Diameter Range Honing Stones
Guide
Hone Shoe
Hone
Body (2 of
Stone inches mm For Stock Removal For Finishing each)
FA4-AA73 FA4-AA75 FA4-AA93 FA4-AA95 FA4-B
F-1 .125–.4062 3 – 10 FA-E FA8-AA73 FA8-AA75 FA8-AA93 FA8-AA95 FA8-B
FA10-AA73 FA10-AA75 FA10-AA93 FA10-AA95 FA10-B
FB13-AA73 FB13-AA75 FB13-AA93 FB13-AA95 FB13-B
F-2 .4062–.8125 10 – 20 FB-E
Each set contains hone body, FB19-AA73 FB19-AA75 FB19-AA93 FB19-AA95 FB19-B
wrench, F-700 dressing stick, and FC26-AA73 FC26-AA75 FC26-AA93 FC26-AA95 FC26-B
F-3 .4062–1.5 20 – 38 FC-E
two each of stones and guide shoes FC36-AA73 FC36-AA75 FC36-AA93 FC36-AA95 FC36-B
needed for stock removal and surface FD48-AA73 FD48-AA75 FD48-AA93 FD48-AA95 FD48-B
finishing. Ordering in Sets saves you F-4 1.5–2.75 38 – 70 FD-E
approximately 10%. FD64-AA73 FD64-AA75 FD64-AA93 FD64-AA95 FD64-B
Selection of External Hone Tooling

For Complete External External Hone Adapter
Honing Tooling Order
Chucks
1 2 3 1 2 Guide Shoes
3 Length of Stone
or Guide Shoe
Diameter For use with
Range Hone For All Diamond or Honing
Body Metals CBN/Borazon Stone
inches mm Stones only inches mm

.120-.240 3-6 FA-E FA4-B FA4-BB* .5 13 MB-748 MB-750 MB-770
FFA4-B FFA4-BB* 1 25
Select
6-8
.240-.300 FA8-B FA8-BB .75 19 Fit Sunnen Honing Machine spindles.
From
.300-.400
8-10 FA10-B FA10-BB 1 25 Hold work being rotated for external
Chart honing operations.
10-15
.400-.580 FB-E FB13-B FA13-BB 1 25
Below 1.5
15-20
.580-.800 FB19-B FA19-BB 38
Diameter Range
20-28
.800-1.100 FC-E FC26-B FC26-BB 2 51
Part No. inches mm
FFC26-B FFC26-BB 4 102
MB-748 0"-.375" 0-10
1.100-1.500 28-38 FC36-B FC36-BB 2.5 64
1.500-2.000 38-51 FD-E FD48-B FD48-BB 3 MB-750 .1875"-.75" 5-19
76
2.000-2.750 51-70 FD64-B FD64-BB 4 102 MB-770 .125"-5" 3-127
70-115
2.750-4.500 FD-E FD64-B FD64-BB 4 102
N88X
3 Stone for External Hones

For Stock Removal For Fine Finishing
(Numbers listed with materials indicate For Polishing
Diameter Hone Hone on previously honed parts on previously
Body approximate finish in microinches)
Range Body finished
with (one Hard Steel*, 10 Soft Steel, 15 Diamond Stones Hard Steel, 3 Soft Steel, 4 Diamond Stones honed parts
Multiple stone Soft Brass, 25 Wrought Carbide, 20 Soft Brass, 12 Wrought 400 Grit 600 Grit
Holder reqd.) Carbide 7 3
Cast Aluminum, 25 Ceramic, 40 Cast Aluminum, 12
inches mm Ceramic 20 15 All Materials
Aluminum, 25 Bronze, 25 Glass, 70 Aluminum, 12 Bronze, 12 Glass 30 15
FA4-AA73 FA4-AA75 FA4-DV57 FA4-AA93 FA4-AA95 FA4-DV87 FA4-DV07 FA4-CC05
.120-.240 3-6 FFA4-AA73 FFA4-AA75 FFA4-DV57 FFA4-AA93 FFA4-AA95 FFA4-DV87 FFA4-DV07 FFA4-CC05
FB-E
.240-.300 6-8 FA-E FA8-AA73 FA8-AA75 FA8-DV57 FA8-AA93 FA8-AA95 FA8-DV87 FA8-DV07 FA8-CC05
With
.300-.400 8-10 FB-FA FA10-AA73 FA10-AA75 FA10-DV57 FA10-AA93 FA10-AA95 FA10-DV87 FA10-DV07 FA10-CC05
.400-.580 10-15 FC-E FB13-AA73 FB13-AA75 FB13-DV57 FB13-AA93 FB13-AA95 FB13-DV87 FB13-DV07 FB13-CC05
With FB-E
.580-.800 15-20 FC-FB FB19-AA73 FB19-AA75 FB19-DV57 FB19-AA93 FB19-AA95 FB19-DV87 FB19-DV07 FB19-CC05
FC26-AA73 FC26-AA75 FC26-DV57 FC26-AA93 FC26-AA95 FC26-DV87 FC26-DV07 FC26-CC05
FD-E
.800-1.100 20-28 FC-E FFC26-AA73 FFC26-AA75 FFC26-DV57 FFC26-AA93 FFC26-AA95 FFC26-DV07 FFC26-CC05
With
1.100-1.500 28-38 FD-FC FC36-AA73 FC36-AA75 FC36-DV57 FC36-AA93 FC36-AA95 FC36-DV87 FC36-DV07 FC36-CC05
1.500-2.000 38-51 None FD48-AA73 FD48-AA75 FD48-DV57 FD48-AA93 FD48-AA95 FD48-DV87 FD48-DV07 FD48-CC05
FD-E
2.000-2.750 51-70 available FD64-AA73 FD64-AA75 FD64-DV57 FD64-AA93 FD64-AA95 FD64-DV87 FD64-DV07 FD64-CC05
None FD-E-N88X FD64-AA73 FD64-AA75 FD64-DV57 FD64-AA95 FD64-DV87 FD64-CC05
2.750-4.500 70-115 available FD64-AA93 FD64-DV07
NOTE: If double length stone is used (FFA4- or FFC26-), you must use guide shoes with identical prefix. Example: Use FFA4-AA73 stone with FFA4-B shoe.
*CBN/Borazon® Stones are available for honing very hard materials such as High Speed Steels, 400C Stainless, Inconel 718, Nitralloy, 52100 Steel, etc.
www.sunnen.com 5
Valve Guide Sizing
Sunnen HONALL®
• Produces straight, round holes

• Fast setup
• Easy-to-use
P-190 Valve Guide Hone Set Ordering Information

Available to cover most popular sizes. A .375" drill The head and driver are interchangeable with the adapt-
(200 rpm) is recommended for driving power. ers. Only one head and driver is required. Mandrels are
available to cover all popular sizes. Please select the
5 parts desired from photograph and order from the chart
for the range desired. We recommend that an adapter be
2 Sleeve Head &
purchased for each mandrel. This saves change-over time
Driver
(P-180) going from one mandrel to another.
Additional Mandrel Sizes Available - Call Sunnen
4 Customer Service Department.
Adapter
3 Stone AN-1075 Speed Control Unit

Furnished with on/off switch, fuse,
Mandrel AC cord and grounded AC outlet
1 (includes plug. Reduces rpm when used with
wedge)
AC/DC drill motors and motors
(brush-type only) where ampere
rating is 15 amps or less.
Nominal Range Range Stone

Fractional Size
(inches)
inches mm
1 Mandrel
2 Sleeve
3
Old New
4 Adapter
5 Head &
Driver
.1875 .185-.190 4,7 - 4,8 BL6-185CS S-185 — L6-J67 Order both:

- .195-.200 4,9 - 5,1 BL6-195CS S-195 — L6-J67 PSK6-A
.2187 .215-.220 5,5 - 5,6 BL6-215CS S-215 — L6-J67 LN-3087C
.2343 .235-.240 6,0 - 6,1 BL6-235CS S-235 — L6-J67 †
- .255-.260 6,5 - 6,6 BL8-255AS S-255 — L8-J67 PK8-A
.2656 .270-.275 6,8 - 7,0 BL8-270AS S-270 — L8-J67 PK8-A
- .275-.280 6,9 - 7,1 BL8-275AS S-275 — L8-J67 PK8-A
.3125* .308-.316 7,8 - 8,0 BL10-308AS S-308 LG-13 L10-J69 PK10-A
.3437* .339-.347 8,6 - 8,8 BL10-339AS S-339 LG-13 L10-J69 PK10-A P-180
.3593 .354-.362 9,0 - 9,2 BL10-354AS S-354 LG-13 L10-J69 PK10-A 200 rpm
.375* .370-.385 9,4 - 9,8 BL12-370AS S-370 LH-13 L12-J67 PK12-A max
.4062 .400-.416 10,2 -10,6 BL12-400AS S-400 LH-13 L12-J67 PK12-A
.4375* .432-.447 11,0 -11,4 BL12-432AS S-432 LH-13 L12-J67 PK12-A
.4687 .463-.479 11,8 -12,2 BL12-463AS S-463 LH-13 L12-J67 PK12-A
.5 .495-.526 12,6 -13,4 BL16-495AS S-495 LJ-13 L16-J67 PK16-A
.5468 .526-.557 13,4 -14,1 BL16-526AS S-526 LJ-13 L16-J67 PK16-A
.5625 .557-.588 14,1 -14,9 BL16-557AS S-557 LJ-13 L16-J67 PK16-A
.625 .619-.650 15,7 -16,5 BL20-619AS S-619 LJ-13 L20-J67 PAK16-A
.6562 .650-.681 16,5 -17,3 BL20-650AS S-650 LJ-13 L20-J67 PAK16-A
.6875 .681-.713 17,3 -18,1 BL20-681AS S-681 LJ-13 L20-J67 PAK16-A
.75 .744-.775 18,9 -19,7 BAL20-744LA** S-744 LM-13 L20-J67 PAK20-A
*P-190 Valve Guide Honing Set consists of 1 each mandrel and sleeve for the popular .275", .3125", .3437", and .375" sizes;
also includes PK8-A, PK12-A, P-180, AN-1105A Storage Box, and 6 each L8 — J67 Stones.
** Replaceable shoe type mandrel. Replacement shoe Part No. LA-C (2 required).
† Remove the LN-3087A stone retainer (standard part supplied with the PSK6-A adapter) and replace with the LN-3087C.
The LN-3087C must be ordered separately. AN-1105A Storage Box available for convenient storage of tooling.
6 1-800-325-3670
Lifetime Honing Units
Mandrel ( 19.156") 486.3 mm ( 5G, 5H) Stones Truing For King Pin Fitting
(Reach Length)
20.625") 521.2 mm ( 5K)
Sleeve
(2.75")
69.8 mm (5G, 5H)
( 4.125") 104.7 mm ( 5K) ( 16.406") 416.5 mm Range: .744"-2.625"
(Shank Length) (Stone Length)
(3.281") (18,9-66,7 mm)
83.3 mm
Replaceable shoe type
Tension Block
honing units. Multiple stone
Retainer Block
length hones both bushings
at once—ensures perfect
5G-P28
Wedge
bushing alignment.
P28-
Guide Shoes
Note: Catalog part numbers referencing old and new are for inventory purposes only. Part is unchanged.
Mandrel can be used with fewer than 5 stones for shorter parts which require long reach.
Honing Units
For Complete
Honing Unit Order 2 Replacement Length of
1 3
Mandrel Stones Parts Honing
1 2 3 (Includes Wedge
and Shoes)
Truing
Sleeve
P20-Type (12 per Pkg.)
P28-Type (12 per Pkg.)
(Included with
Mandrel)
Stone
Surface
Range Old New Old New

Old New Old New Old New Steel Steel Extra Extra Shoe
Mandrel Mandrel Part Old New Med. Med. Fine Fine Appli Applic- Fine Fine (2 per Shim
inches mm Part No. Part No. No. Rough Rough Finish Finish Finish Finish cations ations Finish Finish Pkg.) Sets inches mm
.744- .781 18,9-19,8 4ML-750M* 4GP20750UA* ST-750 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UA-B None 10 254
.775- .815 19,7-20,7 4ML-781M* 4GP20781UA* ST-780 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UA-B None 10 254
.806- .843 20,5-21,4 4ML-812M* 4GP20812UB* ST-812 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None 10 254
.838- .875 21,3-22,2 4ML-843M* 4GP20843UB* ST-840 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None 10 254
.869- .906 22,1-23,0 5ML-875M* 5GP20875UB* ST-875 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None 12.5 317
.900- .942 22,9-23,9 5ML-906M* 5GP20906UC* ST-900 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None 12.5 317
.931- .968 23,6-24,6 5ML-937M* 5GP20937UC* ST-937 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None 12.5 317
.962- 1.003 24,4-25,5 5ML-968M* 5GP20968UC* ST-960 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None 12.5 317
1.021- 1.094 25,9-27,8 4PL-1031M* 4GP281000VA ST-1031 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144 13 330
1.084- 1.156 27,5-29,4 4PL-1094M* 4GP281062VA ST-1094 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144 13 330
1.115- 1.187 28,3-30,1 4PL-1125M* 4GP281125VB ST-1125 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144 13 330
1.209- 1.281 30,7-32,5 4PL-1219M* 4GP281187VB ST-1219 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144 13 330
1.292- 1.375 32,8-34,9 5PL-1312M* 5GP281250WB ST-1300 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WB-D LN-1156 16.25 413
1.355- 1.500 34,4-38,1 5PL-1375M* 5GP281375WC ST-1375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WC-D LN-1156 16.25 413
1.542- 1.625 39,2-41,3 5PL-1562M* 5GP281500WD ST-1562 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156 16.25 413
1.605- 1.750 40,8-44,4 5PL-1625M* 5GP281625WD ST-1600 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156 16.25 413
1.730- 1.875 43,9-47,6 5PL-1750M 5GP281750WE ST-1700 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156 16.25 413
1.855- 2.000 47,1-50,8 5PL-1875M 5HP281875WE ST-1875 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156 16.25 413
1.980- 2.125 50,3-54,0 5PL-2000M 5HP282000WF ST-2000 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WF-D LN-1156 16.25 413
2.105- 2.250 53,5-57,1 5PL-2100M 5HP282125WE ST-2125 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WF-D LN-1156 16.25 413
2.230- 2.375 56,6-60,3 5PL-220v0M 5GP282250WF ST-2200 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WF-D LN-1156 16.25 413
2.355- 2.500 59,8-63,5 5PL-2375M 5HP282375WG ST-2375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156 16.25 413
2.480- 2.625 63,0-66,7 5PL-2500M 5HP282500WG ST-2500 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156 16.25 413
*Requires the use of LN570A Concentric sleeve.

Notes:
1. Allow for extra stock in new bushings to be sure honing unit will enter the hole. 5. R eplacement Retainer Block
2. P20-J47 and P28-J47 medium finish stones are recommended for fitting For P20 Mandrels, part no. LN-1529A
king pins in one operation. If a large amount of stock must be removed, For P28 Mandrels up thru 5G-P28-1750WE, part no. LN-1329A
P20-J25 or P28-J27 stones may be used before finishing. Stone must be For P28 Mandrels 5H-P28-1875WE and up, part no. LN-1330A
ordered separately. 6. Replacement Wedges
3. Quantity of stones and shoes required per honing unit is designated by the For 4GP20 Mandrels, part no. 4G-P20
first digit of the honing unit part number. Example: 4G-P20-781UA has four For 5GP20 Mandrels, part no. 5G-P20
shoes and four stones; 5G-P28-1250WB has five shoes and five stones. For 4GP28 Mandrels, part no. 4G-P28
4. Replacement Tension Block (includes spring) For Mandrels 5G-P28-1250WB thru 5G-P28-1750WE, part no. 5G-P28
For P20 Mandrels, part no. LN-1533A For Mandrels 5H-P28-1875WE thru 5H-P28-2500WG, part no. 5H-P28
For P28 Mandrels up thru 5G-P28-1750WE, part no. LN-1336A
For P28 Mandrels 5H-P28-1875WE and up, part no. LN-1337A
www.sunnen.com 7
Type CR Honing Units
For Rod Reconditioning (Journal End)
Range: 1.450"-4.700" (36,8-119,4 mm)
These honing units will produce a round and straight rod
bore and allow you to recondition the rod to original factory
size, assuring a perfect fit of inserts.
How to Order
Order LBN-62 Honing Unit Set for complete coverage
of most popular cars and trucks. Covers diameters from
1.600" to 2.700" (36,8 to 68,6 mm).
OR CR80A – Replacement eccentric ring
They are specially designed to remove stock from
Order individual honing units as needed. Each unit is the reduced bore without enlarging the diameter
complete with wedge, wedge plates and shoes.
across the parting line.
After cap and rod faces have been ground at right angles
to the side of the rod to reduce the diameter of the bore,
these honing units are used to bring the bore back to
standard size.
Honing Units Replacement Parts
1 2 For Complete
Honing Unit Order 1 Mandrel 2 Stones
Shoe
(2 per Pkg.) Wedge Plate Wedge
Range Part No.
Mandrel
inches mm Part No. Part No. Large Small Part No.
1.450-1.600 36,8-40,6 CR-1450 CR-40D Y44-HW Y44-LW CR-70
1.600-1.750 40,6-44,4 CR-1600* CR-40D Y44-HW Y44-LW CR-70
1.750-1.900 44,4-48,3 CR-1750* CR-40D Y44-HW Y44-LW CR-70
1.900-2.100 48,3-53,3 CR-1900* CR-50D CR-120 CR-110 CR-100
2.100-2.300 53,3-58,4 CR-2100* CR-50D CR-120 CR-110 CR-100
2.300-2.500 58,4-63,5 CR-2300* CR-50D CR-120 CR-110 CR-100
2.500-2.700 63,5-68,6 CR-2500* Select From CR-50D CR-100
CR-120 CR-110
Chart
2.700-2.900 68,6-73,7 CR-2700 Below CR-50D CR-120 CR-110 CR-200
2.900-3.100 73,7-78,7 CR-2900 CR-50D CR-120 CR-110 CR-200
3.100-3.300 78,7-83,8 CR-3100 CR-50D CR-120 CR-110 CR-200
3.300-3.500 83,8- 88,9 CR-3300 CR-50D CR-120 CR-110 CR-300A
3.500-3.700 88,9- 94,0 CR-3500 CR-50D CR-120 CR-110 CR-300A
3.700-3.900 94,0- 99,1 CR-3700 CR-50D CR-120 CR-110 CR-400A
3.900-4.100 99,1-104,1 CR-3900 CR-50D CR-120 CR-110 CR-400A
4.100-4.300 104,1-109,2 CR-4100 CR-50D CR-120 CR-110 CR-400A
4.300-4.500 109,2-114,3 CR-4300 CR-50D CR-120 CR-110 CR-400A
4.500-4.700 114,3-119,4 CR-4500 CR-50D CR-120 CR-110 CR-400A
*Included in Set LBN-62. NOTE: Y44-LW was CR-75 and Y44-HW was CR-85, This is a
Part-Number Change ONLY.
Replacement Parts 2 Stone Selection Chart

Tension Block Bronze Shoes CR Stones for CR-1450 Thru CR-1750 Mandrels
LN-1685A—For CR-1450 thru CR-1750 For Power and Long Life (Manually CR-2 Medium Finishing
LN-1337A—For CR-1900 and up Stroked Rod Reconditioning) CR-4 Fine Finishing
Shoe Clamps For CR-1450 thru CR-1750 Y44-J65 Aluminum Rods
(Includes 4 clamps and screws) Mandrels—order P/N PD-B
LN-1637A—For CR-1450 thru CR-1750 CR Stones for CR-1900 Thru CR-4500 Mandrels
For CR-1900 thru CR-4500
CR-45A—For CR-1900 and up Mandrels—order P/N CR-50B CR-9 Aluminum Rods/Titanium
Includes CR-44A (pkg. 4 screws) CR-10 For Rough Honing, Manual Stroking
Ask for Sunnen Product Bulletin P-3504 for special long life CR units. CR-10N For Rough Honing, Power Stroking
CR-12 For Medium Finish Honing, Manual Stroking
CR-12-8 For Medium Finish Honing, Power Stroking
CR-14 For Fine Finish Honing, Manual Stroking
8 1-800-325-3670
All-Steel & Lifetime Honing Units
For Connecting Rods (Pin Fitting)
Range: .619"-1.250" (15,7-31,7 mm)
Adapter Mandrel Stone Truing

Sleeve
Wedge
K20-W
4.750" (120,6 mm)

Wedge
Guide 2.125" 2.500"
(54 mm) (63,5 mm)
AK20-A
AK20
Stone
Retainer
Guide Shoe
For Con-Rod Bushings and Part No. Stones Part No. Replacement Parts
Press-Fit Type Rods K20J25 Roughing Stone for fast removal of K20-W Replacement Wedge (Should be re-
All-steel and Lifetime mandrels, stock in bronze bushings. placed when it begins to show wear.)
specially made for fitting pins in K20J47 M edium finishing stone for bronze LN-3688A Replacement Stone Retainer
con-rods. Stone and shoe are of proper and aluminum. LN-3218A Replacement Wedge Guide
length to produce straight, round, K20J67 Finishing stone for bronze
accurate holes. The all-steel mandrels and aluminum. Notes: 1. Length of Honing Stone Surface –
(K-20) do not have replaceable shoes. 2.5" (63,5 mm).
K20A69 Stones for honing press-fit 2. Allow for extra stock in new
type rods. bushings to be sure mandrel
will enter the hole.
Honing Units
For Complete
Honing Unit Order
1 4
Mandrel
1 2 3 4 (Includes K-20-W Stones
Replacement
Wedge and Shoes)
2 3 (12 per Pkg.)

Old New New
Guide Shoe
(Included
Range Old New Adapter Steel Steel Extra with
Mandrel Mandrel Truing (Includes Old New Old New Applic- Applic- Fine Mandrels)
inches mm Part No. Part No. Sleeve Retainer) Rough Rough Finish Finish ations ations Finish 2 per Pkg.
All-Steel Honing Units
. 619- . 650 15,7-16,5 KL-619M K20619AS S-619 K20-A KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 None
Lifetime Honing Units KL-14
. 744- . 774 18,9-19,7 KL-744M* AK20744UA* S-744* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UA-B
. 775- . 805 19,7-20,4 KL-775M AK20775UA S-775 AK-20A KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UA-B
. 806- . 837 20,5-21,3 KL-806M AK20806UB S-806 AK-20A KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UB-B
. 838- . 868 21,3-22,0 KL-838M* AK20838UB* S-838* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UB-B
. 869- . 899 22,1-22,8 KL-869M AK20869UB S-869 AK-20A KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UB-B
. 900- . 930 22,9-23,6 KL-900M* AK20900UC* S-900* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UC-B
. 994- 1 .062 25,2-27,0 KL-1000M* AK201000UD* S-994* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UD-B
1 .056- 1 .125 26,8-28,6 KL-1062M* AK201062UD* S-1062* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UD-B
1 .119- 1 .187 28,4-30,1 KL-1125M* AK201125UE* S-1125* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UE-B
1 .181- 1 .250 30,0-31,7 KL-1187M * AK201187UE* S-1187* AK-20A* KL-5 K20J25 KL-13 K20J67 KL-14 K20A69 K20J85 UE-B
*Included in LBN-64 Set.
www.sunnen.com 9
For Connecting Rods (Pin Fitting)
Range: .990"-2.625"
(25,1-66,7 mm) Mandrel 9.312" ( 236,5 mm) Stones Truing
6.281"
Sleeve
For: 6.032"
(153,2 mm) ( 81,7 mm)
•P in fitting in con-rods over 1.000" (Shank Length)
(25,4 mm).
Tension Block
• Small cylinders in motorcycles, lawn
mowers, outboard motors, etc. Retainer Block
Mandrel does not wear…shoes

are replaceable. 2G-P28
Notes: Wedge
1. Length of Honing Stone Surface— 2G-P28
3.2812" (81,7 mm).
2. Allow for extra stock in new bushings to
be sure honing unit will enter the hole. Guide Shoe
Honing Units
For Complete
Honing Unit Order
Mandrel
2 Replacement Parts
1 2 3 1 (Includes Wedge
and Shoes)
Truing
Sleeve 3 Stones
PL-Type (12 per Pkg.)
(Included with
Mandrel)
Old New Old New Old New Steel Steel Extra Extra Shoe
Mandrel Mandrel Part Old New Med. Med. Fine Fine Applic- Applic- Fine Fine (2 per Shim
inches mm Part No. Part No. No. Rough Rough Finish Finish Finish Finish ations ations Finish Finish Pkg.) Sets Wedge
.990-1.062 25,1-27,0 1PL-1000M* 2GP281000VA* ST-1000 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144 2G-P28
1.052-1.125 26,7-28,6 1PL-1062M* 2GP281062VA* ST-1062 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144 2G-P28
1.115-1.187 28,3-30,1 1PL-1125M* 2GP281125VB* ST-1125 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144 2G-P28
1.177-1.250 29,9-31,7 1PL-1187M* 2GP281187VB* ST-1187 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144 2G-P28
1.230-1.375 31,2-34,9 1PL-1250M* 2GP281250WB* ST-1250 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WB-D LN-1156 2G-P28
1.355-1.500 34,4-38,1 1PL-1375M* 2GP281375WC* ST-1375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WC-D LN-1156 2G-P28
1.480-1.625 37,6-41,3 1PL-1500M* 2GP281500WD* ST-1500 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156 2G-P28
1.605-1.750 40,8-44,4 1PL-1625M* 2GP281625WD* ST-1600 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156 2G-P28
1.730-1.875 43,9-47,6 1PL-1750M 2GP281750WE ST-1700 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156 2G-P28
1.855-2.000 47,1-50,8 1PL-1875M 2HP281875WE ST-1875 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156 2H-P28
1.980-2.125 50,3-54,0 1PL-2000M 2HP282000WF ST-2000 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WF-D LN-1156 2H-P28
2.355-2.500 59,8-63,5 1PL-2375M 2HP282375WG ST-2375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156 2H-P28
2.480-2.625 63,0-66,7 1PL-2500M 2HP282500WG ST-2500 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156 2H-P28
*Requires eccentric sleeve LN-0116A. Note: See next page for Tension Block and Retainer Block Part Numbers.
PHT Plateau Honing Tool For Blind Hole Work…

For Use With PL Mandrels The honing units listed above can be converted by ordering: A and B
For Diameter Abrasive Sets A Wedge B Stone
Tool
Range (320 GRIT)
Old New Order Old New Old New Old New
PL Style .990-6.00" P28-PHT-731 Mandrel No. Mandrel No. Wedge No. For Honing Rough Rough Finish Finish Polish Polish
Mandrels (25,146-152,4 mm) (fits all PL style
mandrels) 1PL-1000M to 2GP281000VA- 2G-R28 Steel RL-8 R28A49 RL-14 R28A65 RL-17 R28J85
1PL-1750M 2GP281750WE
1PL-1875M to 2HP281875WE- 2H-R28 Cast iron, RL-7 R28J47 RL-13 R28J67 RL-17 R28J85
1PL-2500M 2HP282500WG Bronze,
Aluminum
Note: Special short length hard tip stones and shoes available for honing short wheel
cylinders. Call customer service department.
10 1-800-325-3670
For Piston Pin Fittings
Range: .744"-2.625" (18,9-66,7 mm)
Recommended for fast, accurate piston pin fitting. Especially for truck, tractor and diesel engines.
3GP20 Series Tooling 3GP28 Series Tooling

Mandrel Stones Truing Mandrel Stones Truing
2.25" 7.50"
Sleeve Sleeve
2.25" 9.843"
(69,5 mm) (100,5 mm) (69,8 mm) (250 mm)
2.50" 3.281"
(Shank Length) (Stone Length) (Shank (Stone Length)
(63,5 mm) (83,3 mm)
Length)
Tension Block Retainer Block Tension Block Retainer Block
P20 3G-P28
Wedge Wedge
Guide Shoes
Guide Shoes
Honing Units
Replacement
2
For Complete
Honing Unit Order Parts
Mandrel (Included
1 2 3 1 (Includes Wedge
and Shoes)
Truing
Sleeve 3 Stones
PL-Type (12 per Pkg.)
with
Mandrel)
Old Old New Old New Steel Steel Extra Extra Shoe
Mandrel New Mandrel Part Old New Med. Med. Fine Fine Applic- Applic- Fine Fine (2 per Shim
inches mm Part No. Part No. No. Rough Rough Finish Finish Finish Finish ations ations Finish Finish Pkg.) Sets
.744- .781 18,9-19,8 3ML-750M* 3GP20750UA* ST-750 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UA-B None
.775- .812 19,7-20,6 3ML-781M* 3GP20781UA* ST-780 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UA-B None
.806- .843 20,5-21,4 3ML-812M* 3GP20812UB ST-812 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None
.838- .875 21,3-22,2 3ML-843M* 3GP20843UB* ST-840 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None
.869- .906 22,1-23,0 3ML-875M* 3GP20875UB* ST-875 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UB-B None
.900- .937 22,9-23,9 3ML-906M* 3GP20906UC* ST-900 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None
.931- .968 23,6-24,6 3ML-937M* 3GP20937UC* ST-937 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None
.962-1.000 24,4-25,4 3ML-968M* 3GP20968UC* ST-960 ML-5 P20J25 ML-7 P20J47 ML-13 P20J67 ML-14 P20A69 ML-17 P20J85 UC-B None
.990-1.062 25,1-27,0 3PL-1000M* 3GP281000VA* ST-1000 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144
1.052-1.125 26,7-28,6 3PL-1062M* 3GP281062VA ST-1062 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VA-B LN-1144
1.115-1.187 28,3-30,1 3PL-1125M* 3GP281125VB* ST-1125 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144
1.177-1.250 29,9-31,7 3PL-1187M* 3GP281187VB* ST-1187 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 VB-B LN-1144
1.230-1.375 31,2-34,9 3PL-1250M* 3GP281250WB* ST-1250 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WB-D LN-1156
1.355-1.500 34,4-38,1 3PL-1375M* 3GP281375WC* ST-1375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WC-D LN-1156
1.480-1.625 37,6-41,3 3PL-1500M* 3GP281500WD* ST-1500 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156
1.605-1.750 40,8-44,4 3PL-1625M* 3GP281625WD* ST-1600 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WD-D LN-1156
1.730-1.875 43,9-47,6 3PL-1750M 3GP281750WE ST-1700 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156
1.855-2.000 47,1-50,8 3PL-1875M 3HP281875WE ST-1875 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WE-D LN-1156
1.980-2.125 50,3-54,0 3PL-2000M 3HP282000WF ST-2100 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WF-D LN-1156
2.355-2.500 59,8-63,5 3PL-2375M 3HP282375WG ST-2375 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156
2.480-2.625 63,0-66,7 3PL-2500M 3HP282500WG ST-2500 PL-5 P28J27 PL-7 P28J47 PL-13 P28J67 PL-14 P28A69 PL-17 P28J85 WG-D LN-1156
*Requires eccentric sleeve LN-0116A. Included in LBN-11 Mandrel Set. See page 14.
Notes:
1. A
llow for extra stock in new bushings to be sure honing unit 4. Replacement Tension Block (Includes Spring)—For P20 Mandrels,
will enter the hole. Part No. LN-1533A. For Mandrels 3G-P28-1000VA through
2. For other Honing Stones, see pages 29 and 30. 3G-P28-1750WE, Part No. LN-1336A. For Mandrels
3. Replacement Wedge—For P20 Mandrels, Part No. 3G-P20. 3H-P28-1875WE up, Part No. LN-1337A.
For Mandrels 3G-P28-1000VA through 3G-P28-1750WE, 5. Replacement Retainer Block—For P20 Mandrels, Part No.
Part No. 3G-P28. For Mandrels 3H-P28-1875WE up, LN-1529A. For Mandrels 3G-P28-1000VA through 3G-P28-1750WE,
Part No. 3H-P28. Part No. LN-1329A. For Mandrels 3H-P28-1875WE up, Part No.
LN-1330A.
www.sunnen.com 11
Tooling Required For Honing High Performance Slotted Pistons
YY24-A Adaptor YY24-W Wedge Stone

Type YY24 Mandrels are all-steel (includes stone retainer & wedge guide) (supplied with mandrel)
honing units. They are applicable LN-3218A Wedge Guide
to the honing of import and small (supplied with adapter)
domestic pistons and performance
pistons with small diameter pins,
with slotted piston pin bores. 4" 4"
(101,6 mm) (101,6 mm)
For a Complete Honing Unit
Order Mandrel, Truing Sleeve,
Stone and Adapter.
LN-3687A Stone Retainer Mandrel Guide Shoes
(supplied with adapter) (includes wedge) (integral part of YY24 mandrels)
For Complete
Honing Unit Order
Honing Units
1 2 3 4
Range
inches mm 1 Mandrel
Part No. 2 Sleeve 3 Adapter 4 (1 per Pkg.)
Stone Wedge
.748-.758 19,0-19,35 YY24-748M ST-750 YY24-A YY24-J65 YY24-W

.787-.797 19,9-20,2 YY24-787M ST-780 YY24-A YY24-J65 YY24-W
.800-.810 20,3-20,5 YY24-800M ST-800 YY24-A YY24-J65 YY24-W
.826-.836 20,9-21,3 YY24-826M ST-826 YY24-A YY24-J65 YY24-W
.867-.877 22,0-22,3 YY24-867M ST-867 YY24-A YY24-J65 YY24-W
.875-.885 22,2-22,5 RYY-875M ST-875 RYY-13 YY32-W
.901-.911 22,9-23,1 RYY-901M ST-900 RYY-13 YY32-W
.912-.922 23,2-23,4 RYY-912M ST-912 Not RYY-13 YY32-W
.927-.940 23,5-23,9 SYY-927M ST-927 Required SYY-13 YY32-W
.975-.980 24,8-24,9 SYY-973M ST-973 SYY-13 YY32-W
.990-1.000 25,1-25,4 SYY-989M ST-989 SYY-13 YY32-W
1.040-1.050 26,4-26,7 SYY-1040M ST-1040 SYY-13 YY32-W
1.094-1.104 27,8-28,0 SYY-1094M ST-1094 SYY-13 YY32-W
Note: These honing units must be used within a range of .010" (0,25 mm) of the standard wrist pin diameter shown.
Type RYY and SYY: Notes:

1. These honing units must be used within a
For pistons with wide slots in range of .010" (0,25 mm) of the standard
pin hole wrist pin diameter shown.
Type RYY and SYY Mandrels are long-wearing, 2. Use LN-0116A Eccentric Sleeve with
all-steel units, made especially for pistons with these honing units. See page 16.
wide slots in the piston pin holes. The mandrels
3. Honing units must be trued in prior
have extra-wide guide shoes, and the honing to use.
stones have a double surface for bridging the
wide slots.
12 1-800-325-3670
For Piston Pin Fittings
Range: .370"-.713" (9,4-18,1 mm)

Especially useful on Foreign Cars and Small Tractors.
Long-wearing honing units for small piston pin holes, distributor bushings, small king pin bushings and similar holes
within the range.
Adapter Mandrel Stone Truing
Sleeve
Wedge
BL16-W
Wedge (6.625") 168,2 mm
Guide
( 2.125") ( 4.50")
53,9 mm 114,3 mm
BL16-A BL16-
Stone Guide Shoes

Retainer are integral part of mandrel.
For Complete Honing Units

Honing Unit Order
1 2 3 4 1 Mandrel
(Includes Wedge and Shoes) 4 Stones
(6 per Pkg.)
Range Old Ship. Wt. Adapter
inches mm
Mandrel
Part No.
New Mandrel
Part No. lbs. kg. 2 Truing
Sleeve 3 (Includes
Retainer)
Old
Rough
New
Rough
Old
Finish
New
Finish
Replacement
Wedges
.370-.384 9,4- 9,8 LH-370M BL12370AS .25 ,11 S-370 BL12-A LH-7 L12J47 LH-13 L12J67 BL12-W
.432-.446 11,0-11,3 LH-432M BL12432AS .25 ,11 S-432 BL12-A LH-7 L12J47 LH-13 L12J67 BL12-W
.495-.525 12,6-13,3 LJ-495M* BL16495AS .5 ,22 S-495 BL16-A LJ-7 L16J47 LJ-13 L16J67 BL16-W
.650-.681 16,5-17,3 LJ-650M BL20650AS .5 ,22 S-650 BL20-A LJ-7 L20J47 LJ-13 L20J67 BL16-W
*Included in LBN-1A. Note: Allow for extra stock in new bushings to be sure honing unit will enter hole.
Bushing Expander Order

For expanding new bushings in rods...provides another 1 Expander
2
Diameter Range
Expander (includes
use for your versatile Sunnen Honing Machine!
Mandrel inches mm facing cutter)
• Assures 100% contact for perfect heat transfer. ALR-720** .720-.840 18,3-21,3 AL-12*
• Additional protection for your pin fit. ALR-840** .840-.900 21,3-22,9 AL-12*
• Squeezes bushing into every hole irregularity.
ALR-900** .900-.960 22,9-24,4 AL-12*
• Swedges bushings in minutes.
• Trims bushing edges square and clean. ALR-960** .960-1.080 24,4-27,4 AL-12*
Caution: Do not use these SL-15 Roughing Cutter (Optional)

mandrels for honing.
Used with the ALR series expander mandrels.

It is used to remove excess bushing stock prior to honing.
Pressed-in bushing touches AL54 Wedge (Replacement)
on the high spots only.
Shipping Weight: Replacement Parts for AL-12

2-1/2 lbs. (1,13 kg)
Expanded bushing fills in valleys and AL-144 Facing Cutter AL-143A Expander Bit & Spring
is locked in perfectly to rod eye.
*ALR expander mandrels cannot be used without AL-12 expanders.
Keeps bushings from working loose. Please order separately.
**ALR mandrels require the use of AK20A adapter.
www.sunnen.com 13
Mandrel Sets
For Pin Fitting and Rod Reconditioning
Sunnen Mandrel Sets and Honing LBN-62 Lifetime Honing Unit Set
Unit Sets
The easy way to order. Buying in sets, using a single part
number, simplifies ordering and assures having the right
unit needed for the job at hand. Each set covers a
particular size range or application.
LBN-1A All-Steel Honing Unit Set

For Small Diameters. Long For Con Rod Reconditioning. A set of complete lifetime
wearing all-steel honing units honing units for most popular cars and trucks. Covers
for small piston pin holes— diameters from 1.600"-2.700". Comes with CR-2 and
distributor bushings, small king CR-12 Stones for honing journal end of con rods.
pin bushings, and similar holes See page 8 for individual units.
within the range. Includes
L16J57 Roughing and L16J67 Range: 1.600"-2.700" (40,6 mm-68,1 mm)
Finishing Stones. See page 13
for individual units. Qty. Part No. Qty. Part No.
Note: Catalog part numbers referencing old and new are for 1 CR-1600 1 CR-2100
inventory purposes only. Part is unchanged. 1 CR-1750 1 CR-2300
1 CR-1900 1 CR-2500
Range: .495"-.713" (12,6 mm-18,1 mm)
Includes SL-37 Mandrel Rack, 2 CR-2 and 4 CR-12 Stones.
Qty. Old Part No. New Part No. Description Qty. Part No. Description Shipping Weight: 53 lbs. (24,1 kg)
1 LJ-495M BL16495AS Mandrel 1 S-495 Truing Sleeve LBN-64 Lifetime Honing Unit Set
1 LJ-526M BL16526AS Mandrel 1 S-526 Truing Sleeve
3 BL16-A BL16-A Adapters 1 SL-30 Mandrel Rack
2 BL18-A BL20-A Adapters
6 LJ-7 L16J47 Stones
6 LJ-13 L16J67 Stones For Con Rod Bushings and Press-Fit Type Rods.
Shipping Weight: 20 lbs. (9,1 kg) Contains nine (9) complete lifetime honing units designed
for accuracy and speed in honing con rods. See page 9
LBN-11 Mandrel Set for individual units. Set includes 12 K20J67 Stones, plus 12
For Piston Pin Fitting. K20A69 Stones for honing press-fit type rod forgings. For
Contains four (4) mandrels, convenient storage, order SL-30 Mandrel Rack separately.
truing sleeves and medium finish- See page 16.
ing stones for piston pin fitting and
general work within the size range Note: Catalog part numbers referencing old and new are for
shown. Mandrels are assembled inventory purposes only. Part is unchanged.
with stones. See page 11 for Range: .744"-1.250" (18,9 mm-31,7 mm)
additional units. For convenient Qty. Old Part No. New Part No. Description Qty. Part No. Description
storage order SL-38 Mandrel Rack
separately. See page 16. 1 KL-744M AK20744UA Mandrel 1 S-744 Truing Sleeve
1 KL-838M AK20838UB Mandrel 1 S-838 Truing Sleeve
Note: Catalog part numbers referencing old and new are for 1 KL-900M AK20900UC Mandrel 1 S-900 Truing Sleeve
inventory purposes only. Part is unchanged. 1 KL-931M AK20931UC Mandrel 1 S-931 Truing Sleeve
Range: .900"-1.062" (22,9 mm-26,9 mm) 1 KL-962M AK20962UC Mandrel 1 S-962 Truing Sleeve
Qty. Old Part No. New Part No. Description Qty. Part No. Description 1 KL-1000M AK201000UD Mandrel 1 S-994 Truing Sleeve
1 3ML-906M 3GP20906UC Mandrel 1 ST-900 Truing Sleeve 1 KL-1062M AK201062UD Mandrel 1 S-1062 Truing Sleeve
1 3ML-937M 3GP20937UC Mandrel 1 ST-937 Truing Sleeve 1 KL-1125M AK201125UE Mandrel 1 S-1125 Truing Sleeve
1 3ML-968M 3GP20968UC Mandrel 1 ST-960 Truing Sleeve 1 KL-1187M AK201187UE Mandrel 1 S-1187 Truing Sleeve
1 3PL-1000M 3GP281000VA Mandrel 1 ST-1000 Truing Sleeve 12 KL-5 K20J25 Stones 9 AK20-A Adapters
12 ML-7 P20J47 Stones 12 KL-13 K20J67 Stones
12 PL-7 P28J47 Stones 12 KL-14 K20A69 Stones
Shipping Weight: Approx. 19 lbs. (8,6 kg) Shipping Weight: Approx. 29 lbs. (13,2 kg)
14 1-800-325-3670
Ring Sets for LBB-1660 & ML-4000
For Rod Reconditioning on Power-Stroked Honing
Machine and CRF-100 Manually Stroked Rod Fixture
Each CR-Type Honing Unit in the 1.450"–3.300" For Coolant Fed Rings 1,9" (48 mm) and above
(36,9–84 mm) range requires a Ring Set for fixturing Order: CRF-6XXA (one per pack). See page 19.
the rods in the machine.
To order individual ring sets in 1.450"–3.300"
Order: CRF-500 Ring Set Kit-Includes all rings for 1.600" (36,9-84 mm) range, refer to chart below.
to 2.700" (36,8 mm–68,6 mm) range, plus CRF-495 Metal
Storage Case.
Rings Ring Sets

For Use Honing Unit Range (2 Rings per Pkg.) Shipping Wt. 3 lbs. (1.4 kg) (4 Rings per Set) Shipping Wt. 6 lbs. (2.7 kg)
With Honing
Units Range Range
inches mm Part No. Part No.
inches mm inches mm
CRF-145A 1.450-1.520 36,9-38,7
CR-1450 1.450-1.600 36,9-41,6 CRF-14 1.450-1.600 36,9-41,6
CRF-152A 1.520-1.600 38,7-41,6
CRF-160A 1.600-1.670 41,6-42,4
CR-1600 1.600-1.750 41,6-44,9 CRF-16* 1.600-1.750 41,6-44,9
CRF-167A 1.670-1.750 42,4-44,9
CRF-175A 1.750-1.820 44,9-46,2
CR-1750 1.750-1.900 44,9-48,7 CRF-17* 1.750-1.900 44,9-48,7
CRF-182A 1.820-1.900 46,2-48,7
CRF-519A 1.9-2.0 48-51
CR-1900 1.9-2.1 48-53 CRF-19* 1.9-2.1 48-53
CRF-520A 2.0-2.1 51-53
CRF-521A 2.1-2.2 53-56
CR-2100 2.1-2.3 53-58 CRF-21* 2.1-2.3 53-58
CRF-522A 2.2-2.3 56-58
CRF-523A 2.3-2.4 58-61
CR-2300 2.3-2.5 58-63 CRF-23* 2.3-2.5 58-63
CRF-524A 2.4-2.5 61-63
CRF-525A 2.5-2.6 63-66
CR-2500 2.5-2.7 63-69 CRF-25* 2.5-2.7 63-69
CRF-526A 2.6-2.7 66-69
CRF-527A 2.7-2.8 69-72
CR-2700 2.7-2.9 69-74 CRF-27 2.7-2.9 69-74
CRF-528A 2.8-2.9 72-74
CRF-529A 2.9-3.0 74-77
CR-2900 2.9-3.1 74-79 CRF-29 2.9-3.1 74-79
CRF-530A 3.0-3.1 77-79
CRF-531A 3.1-3.2 79-82
CR-3100 3.1-3.3 79-84 CRF-31 3.1-3.3 79-84
CRF-532A 3.2-3.3 82-84
CRF-495 Metal Storage Case stores up to 28 rings. Rings have own compartments for ease of selection and convenient storage.
*Included in CRF-500 Ring Set Kit. CRF-541A — Set up disk (for stroker alignment).
Manual Stroke Rod Fixture Kit

Order KKN-100, KKN-650 and MB-2410 for the Manual Stroke Rod
Fixture Kit which provides controlled hand stroking:
• Rod bores are honed square with the face every time.
• Uniform “overstroking” on both ends of stones assures even wear,
prolongs stone life, helps assure consistent crosshatch pattern.
• Reduces training time for operators.
• Can be factory installed when ordered with LBB-1660 or retrofitted
in the field.
Note: Order CRF-500 RING SET KIT or individual ring sets separately.
www.sunnen.com 15
Sunnen Honing Machine Accessories
Mandrel Storage Racks Replacement CRF-750 Universal Holding
SL-30 Belts Fixture
For LBB-1810 and LBC-1803
Honing Machines
Note: Can also be used on LBB-1660
For 6-Speed Heavy-Duty Floor Type Machine Manual Hone equipped with CRF-100
Part No. Description
Manual Stroked Rod Fixture.
MBB-810 Spindle Drive Belt

MBB-820 “V” Drive Belt
For types ALR, AK20, BL12, BL16 and MBB-880 Honing Oil Pump Belt (for
BL20 Mandrels. Each rack holds 16 LBB-1499) 85.25" (2154 mm)
mandrels. Drain pan is included. MB-2292 Honing Oil Pump Belt (for
Shipping Weight: 5.5 lbs. (2,5 kg) LBB-1660 and LBB-1699)
109" (2768 mm)
Accommodates most motorcycle and
SL-38 For LBB-1710 Power-Stroked Machine VW Cylinders and other parts within
Part No. Description the CRF-750’s range that can be
MBB-810 Spindle Drive Belt placed on the honing machine. Fixture
can be installed or removed quickly
MBB-820 “V” Drive Belt and easily. Takes thrust on forward
MB-2292 Honing Oil Pump Belt and back strokes. Includes two pairs
KKN-444A Stroker Belt of fingers with long-wearing, adjust-
able carbide pads.
For LBB-1810 and LBC-1803 Power-Stroked Machines Shipping Weight: 6 lbs. (2,7 kg)
For lifetime honing units with 1.5" MBB-1830A Motor Drive Belt (60 Hz machines)
(38,1 mm) diameter shank. Rack holds MBB-1833A Motor Drive Belt (50 Hz machines) KKN-735A Torque Bracket
8 units. Includes drain pan.
MBB-1840A Spindle Drive Belt Assembly
Shipping Weight: 5 lbs. (2,3 kg)
KKN-444A Stroker Belt
Shipping Weight: .5 lb. (,23 kg) each belt
SL-37
LN-0116A Eccentric Sleeve
Adapts certain mandrels to machine The KKN-735A is used in conjunction

For lifetime and rod reconditioning spindle. Compensates for mandrel
honing units with 1.75" (44,4 mm) with the CRF-750 Universal Holding
run-out. One required per machine. Fixture. It allows honing torque to
diameter shank. Rack holds 7 units. Shipping Weight: 1 lb. (,45 kg)
Includes drain pan. be taken at the center of the bore
Shipping Weight: 5 lbs. (2,3 kg) length. It is especially useful for
MBC-200 Work Light odd shaped cylinders typical of
motorcycle applications.
Shipping Weight: 2.5 lbs. (1,13 kg)
Touch Up Paint
Sunnen machine tool MB-2333A Extra-Long
lacquer in 1 pint
aerosol spray can. Offset Torque Bar-23"
MBB-90437A Vista Green (584 mm) Long
MBC-90411A Pearl Gray The MBC-200 is equipped with a
MBC-90412A Pewter Gray 6-foot (1,83 meters) long cord with a
Shipping Weight: 3-wire moulded-on grounding type
1 lb. (,45 kg) plug. All pedestal or bench machines Useful for absorbing torque on
will accept the work light under either workpieces which are too long for
front spindle motor hold down bolt. the standard 13" (330 mm) torque
Takes standard 110-volt, 100 watt bar. Ideal for honing spindle bodies.
bulb. Bulb not included. Shipping Weight: 4.5 lbs. (2,04 kg)
16 1-800-325-3670
Sunnen Honing Machine Accessories
CR-25 Chamfering Tool MB-2410 Work Tray MAN-700 Diamond
For LBB-1660 and LBB-1699. Stone Dresser
Package of 2.
Chamfers journal end of con-rods.

Use in place of honing stone on
Type CR-1900 and larger Honing Attaches to left and right side of When cutting action of honing stone
Units. Carbide cutting tool has three machine work tray. Keeps work area slows down, a light stroke with the
cutting surfaces. Just flip cutter to of machine free of parts while honing diamond dresser breaks the glaze and
new surface when cutting edge wears. rods and pistons. restores honing efficiency. Especially
Shipping Weight: 13.5 lbs. (6,1 kg) recommended for rod reconditioning.
CR-35 Chamfering Tool Consists of diamond stone on sturdy
MB-2418A Replacement Pad for
metal holder with chain for fastening
MB-2410 Tray. Package of one.
to honing machine.
Shipping Weight: 1 lb. (,45 kg)
Shipping Weight: .5 lb. (,23 kg)
LBN-700 Stone Dresser AN-600 Honing Head

Chamfers journal end of con-rods. 4" 6"
Use in place of honing stone on Type (101 mm) (152 mm)
CR-1450 thru CR-1750.
Replacement part
CR-28A Carbide Cutter. Used for both
CR-25 and CR-35.
Helps keep honing stones sharp
and cutting. Diameter Range: 2.500"-6.500"
Shipping Weight: .25 lb. (,11 kg) (64 mm-165 mm).
B-300 Countersink Ideal for honing small engine,
For chamfering snowmobile and VW-type cylinders.
the wrist pin end Accuracy to .0005" (0,1 mm).
of connecting Uses same stone sets as AN model
rods. The B-300 LBN-462A Mandrel Portable Cylinder Hone (see Page 42).
Countersink “T” Wrench Can be used with any pedestal model
includes an Sunnen Honing Machine.
adapter for chucking into the Sunnen Shipping Weight: 10 lbs. (4,5 kg)
Honing Machine and will chamfer
bushed type as well as LN-150 2.5X Magnifying
press-fit connecting rods. Chamfering
the rod eyes makes assembling the Glass
wrist pin easier and eliminates the LBN-730 Ground optical
possibility of galling during installation. Rod Support glass. Excellent
The unit is sold complete and ready Enables the for inspecting the
for use in any Sunnen Honing Machine. operator to hone two V-6 or condition of
Range: .375" through 1.375" V-8 rods at the same time. Eases carbide cutters,
(9,5-34,9 mm) diameters. production problems associated etc. Supplied in
with honing narrow connecting rods. convenient leather case.
Shipping Weight: 1.5 lbs. (,68 kg)
Shipping Weight: 6 lbs. (2,7 kg) Shipping Weight: .25 lb. (,11 kg)
Stone Chart for SL and UL Type Mandrels

For Use with Flow of Honing Oil Ship. Wt. Lbs.
Fine Medium Std. Per Std. Pkg.
For Use with Mandrels Roughing Finishing Finishing Pkg. lbs. kg
SL-480 thru SL-660 † SL-1 SL-3 6 .5 ,23
SL-5 SL-13 6 1.25 ,57
SL-720 and up † SL-7
SL-8‡ SL-17** 6 1.25 ,57
UL Type Mandrels† UL-5 UL-13 UL-7 4 .75 ,34
** For extra-fine finishing.
† Mandrels are no longer manufactured. Stones are available until current stock is depleted.
‡ For honing steel.
www.sunnen.com 17
CRT Production Rod Reconditioning Tools
For Use With KGM-1000 Rod Reconditioning Machines
Ring Screw Wedge & Sleeve Bushing

Assembly
Driver Cage Wedge Sleeve Pilot
The tools listed in the following chart are the most commonly specified sizes. (Allow 2-4 weeks for processing.) Other
sizes available on request. Consult your local Sunnen Field Engineer or Sunnen Customer Service toll-free in St. Louis.
Complete Size Range Cage New Sleeve and Wedge Pilot Screw Alignment
Tool Number* Inches Number Assembly Number Number Bushing No.*
CRT68-2130-D5C 2.120-2.140 CRT68-C CRT68-2130S-D5CA CRT68-2130-P PHSM-601 CRC-2120

*Alignment bushing not included with complete tool. Order separately.
Replacement Sleeves
Replacement sleeves are available for
all CRT tools. Customer MUST send old
sleeve and wedge assembly to Sunnen
Products for processing. Wedge and
sleeve MUST remain as a matched set.
Call Customer Service for additional
information.
18 1-800-325-3670
SRT Production Rod Reconditioning Tools
For Use With ML and EC Series Machines
SRT Stone Selections AFX Ring and Finger

Stone Set SRT-1375 SRT-1500 SRT-1600 SRT-2000 SRT-2530 SRT-3000 Selections
Coolant ports supplied in these rings.
1.37"-1.46" — — — — —
SRT00-XXXX (34,8-37,1 mm)
1.44"-1.52" — — — — —
SRT0-XXXX (36,6-38,6 mm)
1.50"-1.58" 1.50"-1.58" 1.57"-1.66" 1.97"-2.09" 2.50"-2.62" 2.97"-3.08"
SRT1-XXXX (38,1-40,1 mm) (38,1-40,1 mm) (39,9-42,2 mm) (50,0-53,1 mm) (63,5-66,5 mm) (75,4-78,2 mm)
1.58"-1.66" 1.58"-1.66" 1.65"-1,73" 2.05"-2.17" 2.58"-2.70" 3.05"-3.16"
SRT2-XXXX (40,1-42,2 mm) (40,1-42,2 mm) (41,9-43,9 mm) (52,1-55,1 mm) (65,5-68,6 mm) (77,5-80,3 mm)
Part Use with Finger Part
1.66"-1.73" 1.66"-1.73" 1.73"-1.81" 2.13"-2.25" 2.66"-2.78" 3.13"-3.24" Diameter CRF Ring Part No. Length
SRT3-XXXX (42.2-43,9 mm) (42,2-43,9 mm) (43,9-46,0 mm) (54,1-57,2 mm) (67,6-70,6 mm) (79,5-82,3 mm)
1.450"-1.520" CRF- FX-318 2.039"
— 1.74"-1.81" 1.81"-1.89" 2.21"-2.33" 2.74"-2.86" 3.21"-3.32" (36-38 mm) 145NB2X (52 mm)
SRT4-XXXX (44,2-46,0 mm) (46,0-48,0 mm) (56,1-59,2 mm) (69,6-72,6 mm) (81,5-84,3 mm)
1.520"-1.600" CRF- FX-319 2.004"
— 1.82"-1.89" 1.89"-1.97" 2.29"-2.41" 2.82"-2.94" 3.29"-3.40" (38-40 mm) 152NB2X (51 mm)
1.600"-1.670" CRF- FX-320 1.964"
— 1.90"-1.97" 1.97"-2.05" 2.37"-2.49" 2.90"-3.02" 3.37"-3.48" (40-42 mm) 160NB2X (50 mm)
1.670"-1.750" CRF- FX-321 1.929"
— 1.98"-2.05" 2.05"-2.13" 2.45"-2.57" 2.98"-3.10" 3.45"-3.56" (42-44 mm) 167NB2X (49 mm)
1.750"-1.820" CRF- FX-322 1.889"
XXXX = Order abrasive type and grit size from chart below. (44-46 mm) 175NB2X (48 mm)
1.820"-1.900" CRF- FX-323 1.854"
(46-48 mm) 182NB2X (47 mm)
1.900"-2.000" CRF-619A FX-068 1.814"
Abrasives (48-51 mm) (46 mm)
Diamond (D or R) & CBN (N) — Metal (M) Bond – 6 per Set 2.000"-2.100" CRF-620A FX-069 1.764"
(51-53 mm) (45 mm)
2.100"-2.200" CRF-621A FX-070 1.714"
100 150 220 280 400 500 600
(53-56 mm) (44 mm)
DM55 DM05
2.200"-2.300" CRF-622A FX-071 1.664"
RMG97
(56-58 mm) (42 mm)
NMG55 NMG85
2.300"-2.400" CRF-623A FX-072 1.614"
NMG37 NMG47 NMG67 NMG87 NMG47 NMG47
(58-61 mm) (41 mm)
Note: Abrasives are special order - call Automotive Customer Service for pricing and 2.400"-2.500" CRF-624A FX-073 1.564"
delivery times. (61-63 mm) (40 mm)
2.500"-2.600" CRF-625A FX-074 1.514"
(63-66 mm) (38 mm)
AFX-1000 Production Rod Alignment Bushings 2.600"-2.700" CRF-626A FX-075 1.464"
Reconditioning Fixture (Select bushings based on rod size) (66-68 mm) (37 mm)
Available from stock 2.700"-2.800" CRF-627A FX-076 1.414"
(68-71 mm) (36 mm)
CRC-2120 CRC-2330
CRC-2220 CRC-2370 2.800"-2.900" CRF-628A FX-077 1.364"
(71-74 mm) (35 mm)
CRC-2240 CRC-2420
CRC-2270 CRC-2490 2.900"-3.000" CRF-629A FX-078 1.314"
(74-76 mm) (33 mm)
Note: For additional sizes call Automotive
Customer Service for pricing and 3.000"-3.100" CRF-630A FX-079 1.264"
delivery times. (76-79 mm) (32 mm)
For use in Sunnen CGM, KGM, EC 3.100"-3.200" CRF-631A FX-080 1.214"
and ML type honing machines. (79-81 mm) (31 mm)
www.sunnen.com 19
Typical Cross Section
of Keyway Honing Unit
Max.
Keyway
Stone
Keyway Honing Units
Width Mandrel
7,9 mm
(.312")
Wedge
Guide Shoes
Y32 Keyway Honing Units

Diameter Range: .992" - 1.375" Mandrel Stone Truing
Sleeve
(25,20 - 34,93 mm) Tension Block
For honing parts with keyways, Y32
Wedge
i.e.: harmonic balancers. Y32-W
(4.812")
122,2 mm
( 2.437") (2.375")
101,6 mm 101,6 mm
Y32-
Guide Shoes (2 Required)

Shoe Clamps (4 Required)
Order 1-4 For Complete Y32 Keyway Honing Units

Diameter Range Y32 Mandrel Replacement Guide Shoes† (2 required)
25,20 mm - 34,93 mm
.992" - 1.375" 1 Supplied with a Y32-A
Adapter and Wedge 2 Truing
Sleeve 3 Alignment
Bushing* 4 Honing
Stone
Bronze
General Purpose
Hardened Steel
For hard, rough parts or
For machines with fully Furnished with carbide, ceramic, etc.
mm inches With Standard Shank adjustable spindle nose Mandrel Order Separately
25,20-26,97 .992-1.062 Y32-1000PB S-994 C-1000 PB-B PB-H

26,77-28,57 1.054-1.125 Y32-1062PB S-1062 C-1062 See PB-B PB-H
28,37-30,15 1.117-1.187 Y32-1125PB S-1125 C-1125 PB-B PB-H
Chart
29,95-31,75 1.179-1.250 Y32-1187PC S-1187 C-1187 PC-B PC-H
Below
31,55-33,32 1.242-1.312 Y32-1250PC S-1250 C-1250 PC-B PC-H
33,12-34,92 1.304-1.375 Y32-1312PC S-1312 See note below* PC-B PC-H
*Note: Alignment Bushing - Select the bushing whose bore diameter is just under finish size. When setting up the job for the first time,
the undersize alignment bushing can be honed out to finish size with the same tooling used for honing the workpiece.
†Superabrasive Stone Inserted Guide Shoes for situations where a longer life shoe is needed.
Contact Customer Service for ordering information. Available 4 weeks after receipt of order.
Y32 Mandrel Replacement Parts 4 Stone Selection Chart

Part No. Description Part No. Description
Y32-W Wedge Y32-A55 For Steel Applications
Replace when wear begins to show.
Y32-J67 For Bronze and Cast Iron Applications
LN-1617A Shoe Clamp Set Contact customer service for additional stone selections.
For Mandrels with PB Suffix.
4 clamps with screws
LN-1627A Shoe Clamp Set

For Mandrels with PC Suffix.
4 clamps with screws
LN-1575A Tension Block
20 1-800-325-3670
Honing Oils & Coolants
For Honing Connecting Rods on Sunnen Machines
Mineral Base Honing Oil SHO-965 Honing Oil SCC-900

CK-50-55 55 gal. drum SPECIFICATIONS SCC-900 Coolant Maintenance Kit
CK-50 is specially Chemistry: Contains no Poor housekeeping and improper
formulated for honing mineral oil, coolant concentration are the major
cast iron automo- sulfur, or causes of coolant failure, yet simple
tive and truck engine chlorine daily maintenance will protect and
blocks and should Viscosity: 25 prolong coolant life.
not be used to hone cSt@40°C The Sunnen SCC-900 Coolant
other materials. Maintenance Kit provides everything
Hazardous OSHA/DOT:
No/No you will need to check water based
VOC: 30 grams/liter coolant. Kit includes: Instruction and
Record Forms, Refractometer, PH Kit,
MAN-845-55 55 gal. drum FEATURES & BENEFITS Pitcher Storage Case.
MAN-845-5 5 gal. pail • Low VOC, super-compliant in
MAN-845 is formulated for general pur- California’s SCAQMD
pose automotive machine shop honing. SHO-965 is a high performance Machine Capacities
Most commonly used. lubricant and multi-purpose industrial LBB-1699 & LBB-1660
honing oil without the volatile organic 15 Gal. Capacity
compound content and without
MB-30-55 55 gal. drum the odor. LBB-1810 & LBB-1803
MB-30-5 5 gal. pail 25 Gal. Capacity
MB-30 is Sunnen’s multi-purpose
industrial honing oil. MB-30 works on Filters EC-3500, ML-3500 and ML-5000
virtually any metal from aluminum to Sunnen PF Filters 32 Gal. Capacity
zirconium. are designed to
extend your oil ML-2000
and coolant life. 28 Gal. Capacity
MAN-C Honing Oil SV-20
Concentrate 75 Gal. Capacity
MAN-C is a honing oil concentrate,
which when mixed at the proper ratios
with customer supplied B-200 Press Fit Lubricant
mineral oil, makes MAN- Prevents galling and reduces
845 or CK-50 honing oil. ram pressure.
The end user will save Twelve spray cans per
on shipping expenses by package.
purchasing the mineral oil
locally and mixing it with
MAN-C at their facility. Replacement Filters
SCC-205 Water Base PF-105-4 Extra Fine Filter
Coolant (oil only) (Pkg. of 4)
SCC-205 honing coolant
concentrate is formulated
PF-110-4 Fine Filter B-200L
(oil only) (Pkg. of 4) Same lubricant as B-200
to meet the demands of
PF-104 Extra Fine Filter except packaged in brush
metal bond superabrasive
(oil or water) (Pkg. of 1) applicator bottle.
honing.
PF-160 Fine Filter
(oil or water) (Pkg. of 1)
(Fiberglass)
SCC-605
SCC-605 honing coolant
concentrate is formulated
to meet the demands of
metal bond superabrasive
honing.
www.sunnen.com 21
DH-Series Diamond Honing System
Multi-Point cutting action for a truly round bore!
With multiple points of cutting action,

Sunnen’s DH Diamond Hone Head
offers truly round cylinder bores –
superior to any product on the market.
Two designs of stones are offered - an
economical one with 8 points of con-
tact for rough boring applications or
double 16 points for optimum bore
tolerance.
o matter which model you chose,

N
Sunnen’s DH Hone Head uses a cen-
tral drive shaft assembly. This design
gives you the flexibility to change
diameter ranges by simply switching
the body and stone assembly. You can
purchase the complete system or only
the diameter range you need. 4 Stone - 8 Cutting Edges 4 Stone - 16 Cutting Edges
unnen offers the largest range of
S
diamond hone heads in the indus-
try - from 2.75 in. to 5.555 in. (69,9-
141,1 mm). It is versatile, as well. You
can use metal bond superabrasives
and PHT plateau brushes. Sunnen’s
DH tooling, stones and holders are
made as one which reduces initial
truing time. With Sunnen’s precision
abrasives, there is no need to flip
stones ... another time saver.
Complete System for DHTKIT 2.75" - 5.55" (69,9 - 141,1 mm)

Includes:
4
1 DH-DA Drive shaft assembly
2 DH-70 hone body
3 DH-93 hone body
4 DH-117 hone body
2 3
Individual Components
DH-DA Drive shaft assembly only. Common to all hone bodies.
DHT-70 Hone body and drive shaft. Range 2.75"–3.68" (69,85 - 93,47 mm)
DHT- 93 Hone body and drive shaft. Range 3.68"–4.62" (93,47 - 117,34 mm)
DHT-117 Hone body and drive shaft. Range 4.62–5.55" (117,34 - 141 mm)
DH-224 Stone retaining spring
DH-228A Diamond dressing stick
Optional accessories for industrial use:
DH-206 (drive shaft tube) and DH-207 (feed hex rod) are available to lengthen the standard DH-DA drive assembly from
13.5" to 24.5". (Requires stone assemblies shown in table.) High Force cone and stone assembly, see next page.
22 1-800-325-3670
DH Honing Tool
Components and Abrasives
DH Diamond Hone Head Size Ranges

Minimum Maximum Available Grit
Body 2-Stone 4-Stone PHT Brush mm inches mm inches Stones Size
DHT70 DH2S-1 N/A DH1B-1-534 69,9 2.750 77,7 3.062 — —

DHT70 DH2S-2 N/A DH1B-2-534 77,7 3.062 85,7 3.374 NMH55 220
DHT70 DH2S-3 DH4S-3 DH1B-3-534 85,7 3.374 93,6 3.686 — —
DHT93 DH2S-4 DH4S-4 DH1B-4-534 93,6 3.686 101,5 3.998 GMH45 150
DHT117 DH2S-8 DH4S-8 DH1B-8-534 125,3 4.933 133,2 5.244 RMH95 500
DHT117 DH2S-9 DH4S-9 DH1B-9-534 133,2 5.244 141 5.555 RMH05 600
Order example: DH2S-1xxx (stone #), DH2S-1NMH55 Call Sunnen for additional stone availability.
DHH Diamond Hone Head Stone and Brush Options

High-force Feed Cone and stone sets. Check availability for difficult materials. DH Stone 25
Item Number Description 25 - acceptable roundness.
DH229 High-Force Feed Cone

DHH6 Diamond Stone Set (Range: 3.680”–3.880”) (93, 47-98, 55 mm)
DH Stone 2W
2W – good roundness,
DHH10 Diamond Stone Set (Range: 4.480”–4.680”) (113, 79-118, 87 mm) budget price
DHH12 Diamond Stone Set (Range: 4.880”–5.080”) (123, 95-129 mm)
DHHB-6534 PHT Brush Set (Range: 3.680”–3.880”) (93, 47-98, 55 mm)

DH Stone 4S
DHHB-7534 PHT Brush Set (Range: 3.880”–4.080”) (98, 55-103, 63 mm) 4S- superior or optimum
DHHB-8534 PHT Brush Set (Range: 4.080”–4.280”) (103, 63-108, 71 mm) roundness, more expensive.
DHHB-9534 PHT Brush Set (Range: 4.280”–4.480”) (108, 71-113, 79 mm) 4-stone will last longer,
DHHB-10534 PHT Brush Set (Range: 4.480”–4.680”) (113, 79-118, 87 mm) 16 cutting edges versus 8.
Plateau PHT - Brush Options
Plateau PHT Brush are
Note: GMH55, GMH75, RMH95 and RMH05 abrasive grades will be set up initially. mounted on throwaway
aluminum stone holders.
For the DHT-70, DHT-93 &
DHT-117 hone bodies, brush
assemblies 1 through 9 offer
1 PHT brush mounted on
each stone holder.
www.sunnen.com 23
SV-10/20/400/2400/CV/CK Honing Machines
Accessories and Supplies for CK-2000 Midget Hone Head
Range: 2.000" to 3.000" I.D. (51 mm to 76 mm)
Basic Parts CK-2000 Midget Hone Head Set

Diameter Range: 2"-3" (50,8-76,2 mm) Supplied
Part No. with Description
CK-2000
CK-2005A CK-1823A 1 Tapered Locking Screw (Not shown)

CK-2005A 1 Midget Head and Tube Assembly
CK-2042A 4 Stone Shim, .125" (3,17 mm)
(1 per package)
CK-2075 CK-3105A 1 Shim Rack
CK-2075 1 set Guide Shim Set
CK-2035A 2 sets Master Stoneholder Set (2 per set)
CK-2042A CK-3105A CK-2050A 2 Main and Centering Guides (Includes
CK-2080)
Diameter Range: 2"-2.6" (50,8-66,0 mm)
CK-2080 - Guide Shoe and Screw Set (2 shoes
CK-2125A per set) (Included with C-2050A)
CK-2115A 1 set Alignment Guide Set (2 per set)
CK-2115A CK-2050A (Includes CK-2120)
CK-2035A CK-2120 CK-2080
CK-2075 CK-2120 - Alignment Guide Shoe and Screw Set
Diameter Range: 2.6"-3" (66,0-76,2 mm) (2 shoes per set) (Included with
CK-2115A)
CK-2125A 4 Clamp (1 per package)
CK-2045A CK-2049A CK-2093A CK-2135A
CK-2140
CK-2060A CK-2049A 2 sets Stone Shim Set, .2812" (7,14 mm)
(2 per set)
CK-2060A 2 Main and Centering Guides (Includes
CK-2075 Kit Includes: CK-2070)
Shim Kit Part No. Qty. Description CK-2070 1 1 Guide Shoe and 1 Screw Set (3 per set)
CK-2071A 2 sets Guide & Stone #1 (Included with CK-2060A)
CK-2072A 2 sets Guide & Stone #2 CK-2135A 1 set Alignment Guide Set (2 per set)
CK-2073A 2 sets Guide & Stone #3 (Includes CK-2140)
CK-2074A 1 set Guide & Stone #7 CK-2140 - Alignment Guide Shoe and Screw Set
(2 shoes per set) (Included with
(Included with CK-2076A 1 set Guide & Stone #11 C-2135A)
CK-2000 Hone Head) CK-2077A 1 set Guide & Stone #15 CK-2093A 2 Guide Shim .1875" (4,75 mm)
(4 per set) (1 per package)
Accessories CK-3155A CK-3373A

(Not included with CK-2000) Setting Gage Spring Retainer
CK-2040A Midget Storage Indicates shims Holds the CK-3372 slide
required to set Guides in position during stone
Rack and Stones to cylinder diameter. Also insertion or removal.
For orderly used to adjust Alignment Guides. Also used on the CK-4355A inserter.
storage of Shipping Weight: 3.5 lbs. (1,59 kg) (Used also
Stoneholders
and Alignment Guides.
with CK-2600 and CK-3000 Hone Heads.) CK-2570 Hard
Shipping Weight: 3 lbs. (1,36 kg) Guide Shoe
CK-3355A For long life in high
Stone Inserter production shops.
Changes Stones easily in seconds. Shipping Weight: .5 lb. (,22 kg)
Includes mounting bracket. (Not recommended with 400 grit or
Shipping Weight: 7.5 lbs. (3,40 kg) finer stone sets.)
(Used also with CK-2600 and CK-3000
Hone Heads.)
24 1-800-325-3670
SV-10/20/400/2400/CV/CK Accessories & Supplies
CK-2600 Junior Hone Head
Basic Parts CK-2600 Junior Hone Set

Diameter Range: 2.6"-3.5" (66-89 mm)
Supplied
CK-3105A
CK-2600
CK-3120 CK-1823A 1 Tapered Locking Screw (Not shown)
CK-2605A 1 Junior Head and Tube Assembly
CK-3042A 4 Stone Shim, .25" (6,35 mm)
CK-2715A (1 per package)
(Includes CK-3120)
CK-3125A
CK-3120 - Alignment Guide Shoe and Screw Set
(2 shoes per set) (Included in CK-2715A)
CK-3070 CK-3070 CK-3125A 2 Clamp (1 per package)
CK-3105A 1 Shim Rack
CK-2650A CK-2690A CK-2635A 2 sets Master Stoneholder Set (2 per set)
CK-2650A 1 Main Guide (Includes CK-3070)
CK-3070 - 1 Guide Shoe and 1 Screw Set
CK-2635A (Included in CK-2650A and CK-2690A)
CK-2690A 1 Centering Guide (Includes CK-3070)
CK-2605A CK-3075
CK-3075 Shim Kit Accessories CK-3355A

(Included with CK-2600 Hone Head) (Not included with CK-2600) Stone Inserter
Changes Stones easily in seconds.
CK-3040A Standard Storage Includes mounting bracket.
Rack (Used also with CK-2000 and CK-3000
For orderly storage Hone Heads.)
of Stoneholders
Kit Includes: and Alignment Guides.
Part No. Qty. Description Shipping Weight: 3.5 lbs. (1,59 kg) CK-3373A
CK-3071A 2 sets Guide & Stone #1 (Used also with CK-3000 Hone Head.) Spring Retainer
CK-3072A 2 sets Guide & Stone #2 Holds the CK-3372 slide
CK-3073A 2 sets Guide & Stone #3 CK-3155A in position during stone
insertion or removal.
CK-3074A 1 set Guide & Stone #7 Setting Gage Also used on the CK-4355A inserter.
CK-3076A 1 set Guide & Stone #11 Indicates shims
CK-3077A 1 set Guide & Stone #15 required to set Guides
CK-3078A 1 set Guide & Stone #19 and Stones to cylinder diameter. Also CK-3570 Hard
(4 per set) used to adjust Alignment Guides. Guide Shoe
Shipping Weight: 3.5 lbs. (1,59 kg) For long life in high
Applicable to CK-3000 and CK-2600 (Used also with CK-2000 and CK-3000
production shops.
Hone Heads. Hone Heads.)
Recommended for
use if honing with diamonds.
Shipping Weight: .5 lb. (,22 kg) (Not rec-
ommended with 400 grit or finer stone sets.)
www.sunnen.com 25
CK-3000 Standard Hone Head
Basic Parts CK-3000 Standard Hone Set
Diameter Range: 3.0"-5.0" (72,2-127,0 mm)
Supplied
CK-3000
CK-3005A CK-1823A 1 Tapered Locking Screw (Not shown)
CK-3105A
CK-3070 CK-3005A 1 Standard Head and Tube Assembly
CK-3042A 4 Stone Shim, .25" (6,35 mm) (1 per package)
CK-3120 - Alignment Guide Shoe and Screw Set
(2 shoes per set) (Included in C-2715A
and C-3115A)
CK-3042A CK-3090A CK-3093A CK-3125A 4 Clamp (1 per package)
CK-3105A 1 Shim Rack
CK-3090A 1 Centering Guide (Includes CK-3070)
CK-3075 CK-3070 - 1 Guide Shoe and 1 Screw Set (Included in
CK-3050A, CK-3060, and CK-3090A)
Diameter Range: 3.0"-4.125" (76,2-104,7 mm)
CK-3070 CK-3120 CK-3093A 1 Centering Guide Shim (Used with CK-3090A)
CK-2715A CK-3050A 1 Main Guide (Includes CK-3070)
CK-3035A CK-3125A
CK-3050A
Range: 3.0"-3.75" (76,2-95,2 mm)
Diameter Range: 4.125"-5.0" (104,7-127,0 mm) CK-3115A 1 set Alignment Guide Set (2 per set)
CK-3070 CK-3125A Range: 3.25"-5.0" (82,5-127,0 mm)
CK-3045A CK-3049A CK-3045A 2 sets Master Stoneholder Set (2 per set)
CK-3115A
CK-3049A 2 sets Stone Shim Set .4375" (11,1 mm) (2 per set)
CK-3060A

(Included with CK-3000 Hone Head) (Not included with CK-3000) Stone Inserter
Changes Stones easily in seconds.
CK-3040A Standard Storage Includes mounting bracket.
Rack (Used also with CK-2000 and CK-2600
For orderly storage
Hone Heads.)
of Stoneholders
Kit Includes: and Alignment Guides.
Part No. Qty. Description
Shipping Weight: 3.5 lbs. (1,59 kg) CK-3373A
(Used also with CK-2600 Hone Head.)
CK-3071A 2 sets Guide & Stone #1 Spring Retainer
CK-3072A 2 sets Guide & Stone #2 Holds the CK-3372 slide
in position during stone
CK-3073A 2 sets Guide & Stone #3 CK-3155A insertion or removal.
CK-3074A 1 set Guide & Stone #7 Setting Gage Also used on the CK-4355A inserter.
CK-3076A 1 set Guide & Stone #11 Indicates shims
CK-3077A 1 set Guide & Stone #15 required to set Guides
CK-3078A 1 set Guide & Stone #19 and Stones to cylinder diameter. Also CK-3570 Hard
(4 per set) used to adjust Alignment Guides. Guide Shoe
Shipping Weight: 3.5 lbs. (1,59 kg) For long life in high
Applicable to CK-3000 and CK-2600 (Used also with CK-2000 and CK-2600 production shops.
Hone Heads. Hone Heads.) Recommended for
use if honing with diamonds.
Shipping Weight: .5 lb. (,22 kg) (Not rec-
ommended with 400 grit or finer stone sets.)
26 1-800-325-3670
CK-4000 Large Hone Head
Basic Parts CK-4000 Large Hone Set
Diameter Range: 4"-8" (101,6-203,2 mm) Supplied
CK-4000
CK-1823A 1 Tapered Locking Screw (Not shown)
CK-4005A CK-4005A 1 Large Head and Tube Assembly
PNP-1450 CK-4042A 4 Stone Shim, .25" (6,35 mm) (1 per package)
PNP-1450M
PNP-1600 CK-4043A 4 Stone Shim, .5" (12,7 mm) (1 per package)
PNP-1600M CK-3105A 1 Shim Rack
CK-4125A 4 Clamp (1 per package)
CK-1600A
CK-1450A 1 Graduated Stroke Plate, for 4.5"
CK-4042A CK-4075
(114,3 mm) stones (CK-10 Machines)
CK-1600A 1 Graduated Stroke Plate, for 6" (152,4 mm)
stones (CK-10 Machines)
PNP-1450 1 Graduated Stroke Plate, metric version of
PNP-1450 4.125" (114,3 mm)
CK-4043A PNP-1600 1 Graduated Stroke Plate, for 6" (152,4 mm)
Diameter Range: 4"-6" (101,6-152,4 mm) stones (CV-616 Machines)
CK-3105A
CK-4115A PNP-1600M 1 Graduated Stroke Plate, metric version of
PNP-1600
CK-4125A
CK-3120
CK-4035A
CK-4050A 2 Main and Centering Guide (Includes CK-4070)
CK-4070 CK-4050A CK-4070
CK-4070 - 1 Guide Shoe & 1 Screw Set (Included
Diameter Range: 6"-8" (152,4-203,2 mm) with CK-4050A)
CK-4135A
(Includes CK-3120)
CK-3120 - 1 Guide Shoe and 1 Screw Set (2 per set)
CK- (Included with CK-4115A and CK-4135A)
4125A
CK-4045A CK-4049A CK-4093A CK-4049A 2 sets Stone Shim Set, .75" (19,0 mm) (2 per set)
CK-3120 CK-4093A 2 Main & Centering Guide Shims (1 per package)
(Includes CK-3120)

(Included with CK-4000 Hone Head) (Not included with CK-4000)
Spring Retainer
Holds the CK-4372 slide in position
CK-4155A during stone insertion or removal.
Setting Gage Also used on the CK-3355A inserter.
Indicates shims
required to set Guides
and Stones to cylinder diameter. Also CK-4570 Hard
Kit Includes: used to adjust Alignment Guides. Guide Shoe
Part No. Qty. Description Shipping Weight: 3.5 lbs. (1,59 kg) For long life in high production shops.
CK-4071A 2 sets Guide & Stone #1 Recommended for use if honing with
CK-4072A 2 sets Guide & Stone #2 diamonds. Shipping Weight: .5 lb.
CK-4073A 2 sets Guide & Stone #3 CK-4355A (,22 kg) (Not recommended with 400 grit
CK-4074A 1 set Guide & Stone #7 Stone Inserter or finer stone sets.)
CK-4076A 1 set Guide & Stone #11 Changes stones easily
CK-4077A 1 set Guide & Stone #15 in seconds. Includes
CK-4078A 1 set Guide & Stone #19 mounting bracket.
(4 per set)
www.sunnen.com 27
Tooling for Resizing CK-448A Gearbox Oil FL6X Portable Tool Adapter
High-Silicon Aluminum CK-448A is a sulphur- for CV-616, CK-10 and CK-21
Alloy Blocks free gearbox lubricant Recommended
Porsche, Mercedes Benz, Honda, used in the CV-616 and tool for honing
GM Vega 2300 LBB-1810 transmis- outboard motors.
sion case. Quart (,95 Must be special ordered.
High silicon aluminum die-cast blocks liter). Note: Use of 90 Call Customer Service,
do not require a steel or cast iron liner wt. hypoid lubricant will Sunnen Products Co. For details.
in the cylinder bore. Pure particles of cause premature gear- Shipping Weight: 13 lbs. (5,91 kg)
silicon, about .001" (0,03 mm) in diam- box wear and is not
eter, are dispersed in the aluminum recommended.
alloy. To achieve a proper surface fin-
ish, the cylinders should be prepared PF-244A Gasket for Canister
so piston and rings contact only sili- CK-1436A Cover Lid
con. Silicon is very hard, so there will
be very little wear in the cylinder bore.
and Glass
For CK/CV load meter.
The aluminum’s function is merely to Shipping Weight: CV-1010 Mandrel Adapter
“hold” the silicon particles which actu- .5 lb. (,22 kg) for use on CV-616, CK-10 or
ally form the wall. CK-21
Excessively scored or worn cylinders
can be reconditioned to accept over- CK-1442A Replacement
size pistons. A special “Conditioning” Amber Lens The CV-1010 adapts standard man-
operation is needed to remove alumi- For Dwell Light. drels in applications where the
num from and between the silicon par-
standard hone heads do not apply.
ticles so the wall will be a silicon wall.
Minimum diameter .75" (19 mm).
Tooling required: CK-1444A Replacement Mandrel not included.
Part No. Description Bulb Shipping Weight: 7.5 lbs. (3,41 kg)
MB-30 Honing Oil For Motor On
C30-F85 Felt Set and Dwell
Indicator Lights. Stroke Scale Plates for
C30-J54 Stones
AN-30 Silicon Compound
CV-616 Cylinder King
AN-35 Storage Box Part No. Stone Length
CV-616 Replacement Belts PNP-1275A 2.75" (69,8 mm)
C30-J84 Stones
CK-3035A Master Holder Set, Stones Part No. Description
PNP-1350 3.5" (88,9 mm)
CK-252A Timing Belt
CK-3130A Master Holder Set, Felts PNP-1450 4.5" (114,3 mm)
CK-192A Flat Belt
C30-C03-81 Polishing Stones PNP-1600 6" (152,4 mm)
CK-209A “V” Belt, Upper
CK-498 “V” Belt, Lower CV-1285A 9" (228,6 mm)
CK-1267A “V” Belt, Blower (not shown)
CK-234A Gear Set
Replacement fiber plan- For metric, add “M” to the part number.
etary gear set for the CV-1100 Fiber Mats
CV-616 and CK-10 hand-
wheel assembly.
CK-6200 Clamp Kit for CK-21 includes: 18

Item Part Item Part 1b
No. Number Qty. Description No. Number Qty. Description
1 CH-585A 1 Clamp Bar Assembly 7 CK-1206A 1 Plate and Block Assembly 1a 1 6
(includes 1a, 1b) (Pkg. of 1 includes 8, 9, 10, 11) 5
1a CH-585 1 Clamp Bar, Inside 8 CK-1206 1 Plate, Lower 12
11
1b CH-590 1 Clamp Bar, Outside 9 CK-1207 1 Block
3 CK-1195A 2 Cross Bar 10 CK-1211 1 Clamp Plate, Top 3 4
Assembly 11 PHS-528 2 Screws, .375-16 x 2.5", 9
3a PHP-555 1 Pin, Groove Hex Hd. Cap
4 CK-1220A 4 Block, Riser 12 CK-1208A 2 Stud (Pkg. of 1 includes 13) 3a
13 8
5 CK-1215A 1 Crank Assembly 13 PHN-107A 2 Locknut (Flexloc #31FK-918)
6 CK-1213A 2 Clamp Nut (Pkg. of 1) 17 CK-3275A 1 Hook Rule (Inch and Metric
5 CK-1215A 1 Crank Assembly Scales) 17 10
18 CK-1237 1 Bar
28 1-800-325-3670
Stone Sets for High AN-980 Sunnen Cylinder

Performance Engines Chamfering Cone Reconditioning-Diamond
Honed on Sunnen CV-616 Chamfers the sharp edges Tooling CV or CK
and CK-10 of cylinders for safe piston Applications
and ring installation. Handles The following parts are required for
all diameter cylinders or sleeves. use with Sunnen Diamond Stones
Unit consists of tapered neoprene using the CV-616 or CK-10 with the
cone covered by long-lasting hone heads listed as follows:
replaceable abrasive cone (plus a
spare). Easy to use with .25" (6,3 mm) Standard Hone Head
or larger drill. Part No. Description
Part No. Description CK-3000 Hone Head-Range 3.000" to
AN-980 Replacement Parts 5.000" (76,2-127,0 mm)
These Stone Sets are available for pro- AN-991A Extension CK-3030A Stone Holder Set-Range 3.300"
ducing specific finishes for high per- AN-994A Replacement Cones to 4.625" (83-117,5 mm)
formance engines. Contact Customer (Pkg. of 6) CK-3570† Hard Guide Shoe
Service, Sunnen Products Co. for full
PNP-1275A Standard Stroke Scale Plate
details. As a general rule, however, on
standard cast iron blocks the following CK30-DM100 Stone Set-Roughing
surface finish will be produced:
How to Read Grit Size
The first numeral in the stone code Junior Hone Head
designates the grit size. As shown in Part No. Description
Approx. Surface Finish the examples below, the “1” in EEU-
Stone Set CK-2600 Hone Head-Range 2.600" to
Microinches Ra Micrometers Ra 129 designates that the grit size is 70, 3.500" (66,0-88,9 mm)
EHU-412 47-52 1,1-1,3 as the “8” in JHU-820 designates a
CK-3030A* Stone Holder Set-Range 3.000"
400-grit stone.
EHN-512 40-48 1,0-1,2 to 4.300" (76,2-109,2 mm)
JHU-525 30-36 ,75-,91 Part No. Description CK-3570† Hard Guide Shoe
JHU-623 20-25 ,50-,63 100 Series (example: EEU-129) - 70 grit PNP-1275A Standard Stroke Scale Plate
JHU-818 7-14 ,18-,35 200 Series (example: JUA-222) - 80 grit CK30-DM100 Stone Set-Roughing
C30-C03-81 3-5 ,07-,12 400 Series (example: EHU-412) - 150 grit
*NOTE: O
ne-eighth inch will have to
500 Series (example: EHU-525) - 220 grit be ground off of each pin, and
The surface finishes listed above were
600 Series (example: JHU-625) - 280 grit customer must make this alter-
produced by honing a late model 350
cid Chevy small block. Finishes may 800 Series (example: JHU-820) - 400 grit ation to meet the range.
vary due to variations in cast iron CO Series (example: C30-CO3-81) - 600 grit Special Instructions: The CK-3030A ranges as
alloys, feed rates and honing oil used. shown for each hone head are what control
NOTE: Some
stones can be used the diameter range in which the diamond
for different diameter ranges, stones, using this tooling, can be used.
Most Common Hardness
depending upon which Master Order CK-1860A Thrust Bearing for
Holder Set is used. Once a stone Automotive Suffix Industrial Suffix SuperAbrasive Honing. The Standard
is inserted into the master holder, 10/14/18/20 -5 Bearing will fail prematurely under
it must not be removed until 22/25 -6 these loads.
replacement is necessary. 35 -7 Use a Feed Rate which doesn’t peg
Other abrasives are available for the Load Meter.
special applications. Call Customer For Metal Bond Super Abrasive use in
Service, Sunnen Products Co. for the Large Hone Head, call Customer
information. Service, Sunnen Products Co.
Use of hardened guide shoes is recommended
when using diamond stone sets.
† CK-3570 must be mounted on the
CK-3050A Main Guide Holder
NOTE: For Diamond Abrasives for Rottler
PHT Plateau Honing Tool and K-Line hone heads see pg. 81.
CV/CK Hone Head For Diameter Range

Abrasive Sets (320 GRIT) CK-3030A Diamond Stone
Inches mm
Master Holder Set
2.00-2.40 50,8-60,9 C20-PHT-732
Midget Note:
2.30-2.90 58,4-73,7 C24-PHT-732 Diamond
Junior 2.90-3.40 73,7-86,4 C30-PHT-731 stone master
holders are
Standard 3.10-5.00 78,7-127,0 C30-PHT-731 available for the CK-2000 and CK-4000
4.00-6.00 101,6-152,4 C40-PHT-731 hone heads. Write for bulletin #P-3404
Large and P-3405 or call Customer Service,
6.00-8.00 152,4-203,2 C40-PHT-731
Sunnen Products Co. for information.
www.sunnen.com 29
Honing Stone Sets for Use With SV-10/SV-20/SV-400/SV-2400/CV/CK

For Diameter Range Used with Order These Stone Sets Stone Length
Applications
inches mm Master Holder Set Roughing Finishing inches mm
2.0-2.7 50,8-68,6 CK-2035A EEU-129 EEU-522 2.75 60,8 Hard Blocks
2.0-2.7 50,8-68,6 CK-2035A EEU-141 EEU-531 2.75 60,8 Standard Type Blocks
Midget 2.0-2.7 50,8-68,6 CK-2035A EEU-141 C20-J65-91 2.75 60,8 Alum. Cylinders (Special Finish Stones)
Hone 2.4-2.7 60,9-68,6 CK-2035A EAU-129 EAU-522 2.75 60,8 Hard Blocks
Head 2.4-3.0 60,9-76,2 CK-2035A - C24-A45 3 76,2 Base Finishing before Plateau Honing
6 sets 2.4-2.7 60,9-68,6 CK-2035A EAU-141 EAU-531 2.75 60,8 Standard Type Blocks
2.4-2.7 60,9-68,6 CK-2035A EAU-141 C24-J65-91 2.75 60,8 Alum. Cylinders (Special Finish Stones)
per box
2.4-3.0 60,9-76,2 CK-2035A - C24-A45 3 76,2 Base Finishing before Plateau Honing
2.7-3.0 68,6-76,2 CK-2045A EAU-129 EAU-522 2.75 60,8 Hard Blocks
2.7-3.0 68,6-76,2 CK-2045A EAU-141 EAU-531 2.75 60,8 Standard Type Blocks
2.6-3.5 66,0-88,9 CK-2635A EMN-123 EMN-525 3.5 88,9 Cylinders with Ports
2.6-3.5 66,0-88,9 CK-2635A EMU-123 EMU-518 2.75 60,8 Hard Blocks and Sleeves
Junior 2.6-3.5 66,0-88,9 CK-2635A EMU-133 EMU-525 2.75 60,8 Standard Type Blocks
Hone 2.75-3.5 69,8-88,9 CK-2635A - EKN-525 3.5 88,9 Cylinders with Ports
Head 2.75-3.5 69,8-88,9 CK-2635A - EKN-512 3.5 88,9 Special Applications
3.0-3.5 76,2-88,9 CK-2635A - EHU-412 2.75 60,8 Base Finishing before Plateau Honing
6 sets
3.0-3.5 76,2-88,9 CK-2635A EHN-116 EHN-512 3.5 88,9 VW, Mercedes, High Nickel Race Blocks
per box
3.0-3.5 76,2-88,9 CK-2635A EHN-123 EHN-518 3.5 88,9 Air Cooled Cylinders
3.0-3.5 76,2-88,9 CK-2635A EHN-133 EHN-525 3.5 88,9 Special Applications
3.0-4.125 76,2-104,8 CK-3035A EKU-133 EKU-525 2.75 60,8 Standard Type Blocks
3.25-4.125 82,5-104,8 CK-3035A - AHU-425 2.75 60,8 Aircraft Type Cylinders
3.25-4.125 82,5-104,8 CK-3035A - AHU-425-01A 2.75 60,8 Aircraft Type (Hard Tip)
3.25-4.125 82,5-104,8 CK-3035A EHU-123 EHU-518 2.75 60,8 Hard Blocks and Sleeves
3.25-4.125 82,5-104,8 CK-3035A EHN-116 EHN-512 3.5 60,8 Hard Blocks and Sleeves
3.25-4.125 82,5-104,8 CK-3035A EHU-133 EHU-525 2.75 60,8 Standard Type Blocks
3.25-4.125 82,5-104,8 CK-3035A - JHU-525 2.75 60,8 Aluminum Blocks, Alum. Cylinders
3.25-4.125 82,5-104,8 CK-3035A - JHU-623 2.75 60,8 High Nickel Race Blocks, Alum. Cylinders
3.25-4.125 82,5-104,8 CK-3035A - JHU-625 2.75 60,8 Alum. Cylinders (Special Finish Stones)
Standard 3.25-4.125 82,5-104,8 CK-3035A - JHU-818 2.75 60,8 High Nickel Race Blocks, Alum. Cylinders
Hone 3.25-4.125 82,5-104,8 CK-3035A - JHU-820 2.75 60,8 Alum. Cylinders (Special Finish Stones)
Head 3.25-4.125 82,5-104,8 CK-3035A - C30-CO3-81 2.75 60,8 Polishing, Plateau Honing
6 sets 4.125-5.0 104,8-127,0 CK-3045A - AHU-425 2.75 60,8 Aircraft Type Cylinders
per box
4.125-5.0 104,8-127,0 CK-3045A EHU-123 EHU-518 2.75 60,8 Hard Blocks and Sleeves
4.125-5.0 104,8-127,0 CK-3045A EHN-116 EHN-512 3.5 60,8 Hard Blocks and Sleeves
4.125-5.0 104,8-127,0 CK-3045A EHU-133 EHU-525 2.75 60,8 Standard Type Blocks
4.125-5.0 104,8-127,0 CK-3045A - JHU-525 2.75 60,8 Aluminum Blocks, Alum. Cylinders
4.125-5.0 104,8-127,0 CK-3045A - C30-CO3-81 2.75 60,8 Polishing, Plateau Honing
4.0-6.0 101,6-152,4 CK-4035A JUA-222 JUA-520 6 152,4 Hard Cylinders with Ports
4.0-6.0 101,6-152,4 CK-4035A JUG-222 JUG-520 4.5 114,3 Hard Cylinders
Large 4.0-6.0 101,6-152,4 CK-4035A EUA-107 EUA-510 6 152,4 Cylinders with Ports
Hone 4.0-6.0 101,6-152,4 CK-4035A - C40-A45 6 152,4 Base Finishing before Plateau Honing
4.0-6.0 101,6-152,4 CK-4035A EUG-113 EUG-514 4.5 114,3 Standard Type Blocks
Head
6.0-8.0 152,4-203,2 CK-4045A EUA-107 EUA-510 6 152,4 Cylinders with Ports
1 set 6.0-8.0 152,4-203,2 CK-4045A - C40-A45 6 Base Finishing before Plateau Honing
152,4
per box 6.0-8.0 152,4-203,2 CK-4045A EUG-113 EUG-514 4.5 114,3 Standard Type Blocks
6.0-8.0 152,4-203,2 CK-4045A JUA-222 JUA-520 6 152,4 Hard Cylinders with Ports
6.0-8.0 152,4-203,2 CK-4045A JUG-222 JUG-520 4.5 114,3 Hard Cylinders
30 1-800-325-3670
GHSS
Tooling GHSS 1480/1950
GHSS-1480/1950 Hone Head Stone Sizes GHSS-1480/1950 Hone Head Brush Set Sizes
Diameter Range: 1.50 - 2.51" (38,10 – 63,75 mm) Diameter Range: 1.96 - 2.69" (37,85 - 68,33 mm)
Diameter Stone Size Abrasive Grade Suffix ‡ Diameter Brush Set Abrasive Grade Suffix
Hone Range Prefix (6 Stones/Set) Diamond (D, G, R) CBN (N) Hone Range Prefix
Head mm in Head mm in (4 Brushes/Set)
38,10 - 40,39 1.50 - 1.59 GH258-1- 37,85 - 44,45 1.49 - 1.75 GH258-1
40,13 - 42,42 1.58 - 1.67 GH258-2- NMG37 39,88 - 46,48 1.57 - 1.83 GH258-2
42,16 - 44,45 1.66 - 1.75 GH258-3- 41,91 - 48,51 1.65 - 1.91 GH258-3
GHSS-1480 GHSS-1480
44,20 - 46,23 1.74 - 1.82 GH258-4- GMG55 43,94 - 50,55 1.73 - 1.99 GH258-4 PHT231 (80 Grit)
46,23 - 48,26 1.82 - 1.90 GH258-5- GMG85 NMG85 45,97 - 52,58 1.81 - 2.07 GH258-5
48,26 - 50,29 1.90 - 1.98 GH258-6- 48,01 - 54,61 1.89 - 2.15 GH258-6 PHT731 (320 Grit)
50,04 - 55,88 1.97 - 2.20 GH258-3- NMG05 49,78 - 60,20 1.96 - 2.37 GH258-3
GHSS-1950 54,10 - 59,69 2.13 - 2.35 GH258-5- GHSS-1950 53,85 - 64.26 2.12 - 2.53 GH258-5
58,17 - 63,75 2.29 - 2.51 GH258-7- 57,91 - 68.33 2.28 - 2.69 GH258-7
‡ Other abrasive grades available - Contact Customer Service.
4 5
6
3 2
7 8
1
10 9
Common Repair Parts - GHSS-1480/GHSS1950 (see X-GHSS-4402F for detailed repair parts)
Item GHSS1480 GHSS1950
No. Part No. Part No. Qty Description
1 G13B10616 B13B1066 1 Expander Plates (set of 6)
2 G12B354 G12B353 1 Expansion Cone
3 G17B405 G17G184 1 Expansion Screw
4 G15A175 G15A173 1 Universal Block
5 G16A210 G16A203 4 Universal Block Screw/Pin
6 G17C176 G17C177 1 Universal Joint & Rod
7 F40925 F40926 2 Retaining Spring for Stones
8 G24A127 G24A127 3 Spring Retainer
N/S GH50 GH50 — Spring Tool
9 — — 6 Stone Assembly (See Charts Above)
N/S — F47538 1 Thrust Bearing
10 G20A189 F47537 1 Thrust Washer
N/S GH80049 GH80049 — Truing Grit (70 Grit)
N/S: Not Shown
www.sunnen.com 31
GHSS
Tooling GHSS 2440/2800
GHSS-2440/2800 Hone Head Stone Sizes GHSS-2440/2800 Hone Head Brush Set Sizes
Diameter Range: 2.46 - 3.5" (62,48 – 88,90 mm) Diameter Range: 2.45 - 3.98" (62,23 - 101,09 mm)
Diameter Stoneholder MB Superabrasive Diameter Brush Set Abrasive Grade Suffix
Hone Range (6 Holders) Suffix ‡ Hone Range Prefix
Head† mm in Diamond (D, G, R) CBN (N) Head† mm in (4 Brushes/Set)
62,48 – 64,26 2.46 – 2.53 G14C251-1-S6* GH236GMG35E 65,02 - 75,95 2.56 - 2.99 GH251-1-
GHSS-2440(H) 65,79 – 67,31 2.59 – 2.65 G14C251-2-S6* GH236GMG55E GHSS-2440(H) 68,07 - 78,99 2.68 - 3.11 GH251-2-
68,83– 70,36 2.71 – 2.77 G14C233-1-S6* GH236DMB55E 71,37 - 82,30 2.81 - 3.24 GH233-1- PHT331 (120 Grit)
71,63 - 76,45 2.82 - 3.01 G14C233-1-S6* GH236NMG65E 73,91 - 88,39 2.91 - 3.48 GH233-1-
75,44 - 80,01 2.97 - 3.15 G14C233-7-S6 GH236GMG75E GHSS-2800(H) 80,26 - 94,74 3.16 - 3.73 GH233-4- PHT731 (320 Grit)
GHSS-2800(H) 77,98 - 82,55 3.07 - 3.25 G14C233-4-S6* GH236GMG85E GH236NMG85E 86,61 - 101,09 3.41 - 3.98 GH233-3-
80,52 - 85,09 3.17 - 3.35 G14C233-2-S6 GH236RMG95E
82,30 - 86,87 3.24 - 3.42 G14C233-8-S6 GH236RMG05E GH236NMG05E
84,33 - 88,90 3.32 - 3.50 G14C233-3-S6* GH236RMG005E
NOTES: † GHSS-2440/2800 are kits comprised of (1) hone head & (3) Stoneholder sets (marked “*”). “H” suffix represents the hone head without stoneholder sets.
13 14
9 8 7
4 3
10
11
5 1 2
6 12
Common Repair Parts - GHSS-2440/GHSS2800 (see X-GHSS-4402F for detailed repair parts)
Item GHSS1480 GHSS1950
1 G11C445 G11C444 1 Body
2 G13A2836 G13A2826 1 Expander Plates (set of 6)
3 G12B348 G12B347 1 Expansion Cone
4 G17G184 G17G184 1 Expansion Screw
6 G16A203 G16A202 4 Universal Screw/Pin
7 F43937 F43936 1 Universal Joint Boot
8 F5121GH2 F5121GH2 2 Universal Joint Boot Tie Strap
9 G17G185 G17G185 1 Universal Joint & Rod
10 F5043GH2 F5042GH2 2 Retaining Spring for Stones
11 G24A126 G24A126 3 Spring Retainer
12 6 Stoneholder (See Charts Above)
13 F47538 F47538 1 Thrust Bearing
14 F47537 F47537 2 Thrust Washer
N/S: Not Shown
32 1-800-325-3670
GHSS
Tooling GHSS 3410/4410/5410/6410
GHSS-3410/4410/5410/6410 Hone Head GHSS-3410/4410/5410/6410 Hone Head

Diameter Range: Diameter Range:
3.43 – 7.42" (87,12– 188,47 mm) 3.42 – 7.90" (86,87– 200,66 mm)
Stone Sizes Brush Sets Sizes

Diameter Stoneholder MB Superabrasive Diameter Brush Set Abrasive Grade Suffix
Hone Range (6 Holders) Suffix ‡ Hone Range Prefix
Head † mm in Diamond (D, G, R) CBN (N) Head † mm in (4 Brushes/Set)
87,12 - 91,95 3.43 - 3.62 G14C233-7-S8* 86,87 - 100,33 3.42 - 3.95 GH233-1
89,92 - 94,49 3.54 - 3.72 G14C233-4-S8 89,92 - 104,39 3.54 - 4.11 GH233-7
93,98 - 98,55 3.70 - 3.88 G14C233-8-S8* GH233GMG35E GHSS-3410(H) 96,27 - 110,74 3.79 - 4.36 GH233-8
GHSS-3410(H) 96,27 - 100,84 3.79 - 3.97 G14C233-3-S8 GH233GMG47E 102,62 - 117,09 4.04 - 4.61 GH233-9
100,84 - 105,41 3.97 - 4.15 G14C233-9-S8* GH233GMG55E 109,22 - 123,70 4.30 - 4.87 GH233-10
102,62 - 107,19 4.04 - 4.22 G14C233-6-S8 GH233NMG57E 117,09 - 131,32 4.61 - 5.17 GH233-11 PHT331 (120 Grit)
107,70 - 112,27 4.24 - 4.42 G14C233-10-S8* GH233NMG65E 112,27 - 125,22 4.42 - 4.93 GH233-4
112,52 - 117,09 4.43 - 4.61 G14C233-8-S8* GH233GMG75E 114,81 - 129,29 4.52 - 4.89 GH233-8 PHT731 (320 Grit)
114,81 - 119,38 4.52 - 4.70 G14C233-3-S8 GH233GMB75E GHSS-4410(H) 121,16 - 135,64 4.77 - 5.09 GH233-9
119,38 - 123,95 4.70 - 4.88 G14C233-9-S8* GH233GMG85E GH233NMG85E 127,76 - 142,24 5.03 - 5.60 GH233-10
GHSS-4410(H) 121,16 - 125,73 4.77 - 4.95 G14C233-6-S8 GH233GMB85E 135,64 - 149,86 5.34 - 5.90 GH233-11
126,24 - 130,81 4.97 - 5.15 G14C233-10-S8* GH233RMG95E GHSS-5410(H) ranges are 25,4 mm (1.00 in) larger than the GHSS-4410 ranges
129,79 - 134,11 5.11 - 5.28 G14C233-16-S8 GH233RMG05E GH233NMG05E GHSS-6410(H) ranges are 50,8 mm (2.00 in) larger than the GHSS-4410 ranges
133,10 - 137,67 5.24 - 5.42 G14C233-11-S8* GH233RMG005E
GHSS-5410(H) ranges are 25,4 mm (1.00 in) larger than the GHSS-4410 ranges
GHSS-6410(H) ranges are 50,8 mm (2.00 in) larger than the GHSS-4410 ranges
NOTES: † GHSS-3410/4410/5410/6410 are kits comprised of (1) hone head & (4) Stoneholder sets (marked “*”). “H” suffix represents the hone head without stoneholder sets.
14 2
4
9 13 10
16 7
8
15
3
5 6
1
11
12
Common Repair Parts - GHSS-3410/4410/5410/6410 (see X-GHSS-4402F for detailed repair parts)
Item GHSS3410 GHSS4410 GHSS5410 GHSS6410
No. Part No. Part No. Part No. Part No. Qty Description
1 G11C459 G11D320 G11G575 G11G626 1 Body
2 G13A2898 G13A2918 G13A2918 G13A2918 1 Expander Plates (set of 8)
3 G12B337 G12B337 G12G380 G12G412 1 Expansion Cone
4 G17B341 G17B341 G17B341 G17B341 1 Expansion Screw
5 G15A167 G15A167 G15A167 G15A167 1 Universal Block
6 G16A182 G16A182 G16A182 G16A182 4 Universal Block Screw/Pin
7 F43927 F43927 F43927 F43927 1 Universal Joint Boot
8 F5121GH2 F5121GH2 F5121GH2 F5121GH2 2 Universal Joint Boot Tie Strap
9 G17C159 G17C159 G17C159 G17C159 1 Universal Joint & Rod
10 F5041GH2 F5045GH2 F2075 F2075 2 Retaining Spring For Stones
11 G24A125 G24A125 G24A125 G24A125 8 Spring Retainer
N/S GH50 GH50 GH50 GH50 — Spring Tool
12 6 Stoneholder (See Charts Above)
13 F47530 F47530 F47530 F47530 1 Thrust Bearing
14 F47531 F47531 F47531 F47531 2 Thrust Washer
15 G20A177 G20A177 G20A177 1 Spacer
16 G18C222 G18C222 G18C222 G18C222 1 Driveshaft
N/S GH80049 GH80049 GH80049 GH80049 — Truing Grit (70 Grit)
N/S: Not Shown
www.sunnen.com 33
GHTS
Tooling GHTS 2400/2800
GHTS-2440/2800 Hone Head GHTS-2440/2800 Hone Head

2.39 – 3.64" (60,71 – 92,46 mm) 2.41 – 3.94" (61,21 – 100,08 mm)
Stone Sets Brush Sets Sizes†

Diameter Abrasive Suffix ‡ Diameter Abrasive Suffix
Hone Range Size Set Qty. Hone Range Size Set Qty.
Head mm in Prefix (4 or 6) Diamond (D, G, R) CBN (N) Head mm in Prefix (4 or 6)
60,71 - 65,28 2.39 - 2.57 GT62- 4 6 GMG35 61,21 - 73,15 2.41 - 2.88 GT62- 4 6
64,26 - 69,34 2.53 - 2.73 GT71- 4 6 GMG55 65,02 - 76,71 2.56 - 3.02 GT71- 4 6
GHTS-2440 69,09 - 74,17 2.72 - 2.92 GT76- 4 6 GMG57 NMG57 GHTS-2440 69,85 - 81,53 2.75 - 3.21 GT76- 4 6 PHT331 (120 Grit)
73,91 - 78,74 2.91 - 3.10 GT81- 4 6 GMG75 74,68 - 86,36 2.94 - 3.40 GT81- 4 6
78,74 - 83,57 3.10 - 3.29 GT86- 4 6 GMG85 79,50 - 91,19 3.13 - 3.59 GT86- 4 6
71,37 - 78,23 2.81 - 3.08 GT71- 4 6 71,37 - 85,60 2.81 - 3.37 GT71- 4 6
GHTS-2800 75,44 - 82,80 2.97 - 3.26 GT76- 4 6 GHTS-2800 76,20 - 90,42 3.00 - 3.56 GT76- 4 6 PHT731 (320 Grit)
80,26 - 87,63 3.16 - 3.45 GT81- 4 6 RMG05 NMG05 81,03 - 95,25 3.19 - 3.75 GT81- 4 6
85,09 - 92,46 3.35 - 3.64 GT86- 4 6 85,85 - 100,08 3.38 - 3.94 GT86- 4 6
NOTES: † Abrasive Stone Set Part Numbers are a Size Prefix + Set Qty. + Abrasive Suffix, e.g., GT62-6-GMG85 or GT71-4-PHT731.
12 13
7 5
9
4 10
3
1
8 6 11
Common Repair Parts - GHTS-2440 / GHTS2800

Item GHTS2440 GHTS2800
1 G11C553 G11C499 1 Body
2 G13A333[ ] G13A308[ ] 1 Expander Plates ([ ] = set qty of 4, 6, or 10)
3 G12C241 G12C232 1 Expansion Cone
4 G17B500 G17B436 1 Expansion Screw
6 G16A203 G16A202 4 Universal Block Screw/Pin
7 F43937 F43936 1 Universal Joint Boot
8 F5121GH2 F5121GH2 2 Universal Joint Boot Tie Strap
9 G17C212 G17C168 1 Universal Joint & Rod
10 F5127 F5127 2 Retaining Spring for Stones
11 --- --- 4 or 6 Stone Assembly (See Charts Above)
12 F47538 F47538 1 Thrust Bearing
13 F47537 F47537 2 Thrust Washer
N/S: Not Shown
34 1-800-325-3670
GHTS
Tooling – GHTS 3410/4410/5410
GHTS-3410/4410/5410 Hone Head GHTS-3410/4410/5410 Hone Head

3.42 – 5.53" (86,87 – 140,46 mm) 3.43 – 5.69" (87,12 – 144,53 mm)
Stone Sets† Brush Sets Sizes†

Diameter Set Abrasive Suffix‡ Diameter Abrasive Suffix
Hone Range Size Qty. Hone Range Size Set Qty.
Head mm in Prefix (6) iamond (D, G, R)
D CBN (N) Head mm in Prefix (6) 120 Grit 320 Grit
86,87 - 93,47 3.42 - 3.68 GH261-1- 6 87,12 - 101,35 3.43 - 3.99 GH261-1 6
GHTS-3410 92,96 - 100,08 3.66 - 3.94 GH261-2- 6 GMG37 93,98 - 108,20 3.70 - 4.26 GH261-2 6
99,57 - 106,68 3.92 - 4.20 GH261-3- 6 GMG57 NMG57 GHTS-3410 100,84 - 115,06 3.97 - 4.53 GH261-3 6 PHT331 (120 Grit)
106,17 - 113,28 4.18 - 4.46 GH261-4- 6 GMG75 107,70 - 121,92 4.24 - 4.80 GH261-4 6
112,27 - 118,87 4.42 - 4.68 GH261-1- 6 GMG85 112,52 - 126,75 4.43 - 4.99 GH261-1 6
GHTS-4410 118,36 - 125,48 4.66 - 4.94 GH261-2- 6 RMG95 119,38 - 133,60 4.70 - 5.26 GH261-2 6
124,97 - 132,08 4.92 - 5.20 GH261-3- 6 RMG05 NMG05 GHTS-4410 126,24 - 140,46 4.97 - 5.53 GH261-3 6 PHT731 (320 Grit)
131,57 - 138,68 5.18 - 5.46 GH261-4- 6 RMG005 133,10 - 147,32 5.24 - 5.80 GH261-4 6
GHTS-5410 ranges are 25,4 mm (1.00 in) larger than the GHTS-4410 ranges GHTS-5410 ranges are 25,4 mm (1.00 in) larger than the GHTS-4410 ranges
NOTES: † Abrasive Stone Set Part Numbers are a Size Prefix + Set Qty. + Abrasive Suffix, e.g., GH261-4-GMG85 or GH261-4-PHT731.
13 4
2
9 12
15 5 7
10
14
6 8 1
11
Common Repair Parts - GHTS-3410/4410/5410

Item GHTS3410 GHTS4410 GHTS5410
No. Part No. Part No. Part No. Qty Description
1 G11C475 G11D361 G11G556 1 Body
2 G13A30212 G13A31312 G13A31312 1 Expander Plates (set of 12)
3 G12C233 G12C233 G12G373 1 Expansion Cone
4 G17B411 G17B411 G17B411 1 Expansion Screw
5 G15A167 G15A167 G15A167 1 Universal Block
6 G16A182 G16A182 G16A182 4 Universal Screw/Pin
7 F43927 F43927 F43927 1 Universal Joint Boot
8 F5121GH2 F5121GH2 F5121GH2 2 Universal Joint Boot Tie Strap
9 G17C159 G17C159 G17C159 1 Universal Joint & Rod
10 F5049GH2 F50410 F2075 2 Retaining Spring For Stones
N/S GH50 GH50 GH50 — Spring Tool
11 --- --- --- 6 Stone Assembly (See Charts Above)
12 F47530 F47530 F47530 1 Thrust Bearing
13 F47531 F47531 F47531 2 Thrust Washer
14 G20A177 G20A177 G20A177 1 Spacer
15 G18C222 G18C222 G18C222 1 Drive Shank
N/S GH80049 GH80049 GH80049 — Truing Grit (70 Grit)
N/S: Not Shown
www.sunnen.com 35
Specialized SV-10/SV-20/CV/CK Tooling
Tooling Required for Honing Nikasil Tooling Required for Honing Dart Blocks
Cylinders with CK/CV Tooling
Diameter Range - 3.300-4.625 (83-117,5 mm) CK/CV Type Machines Portable Tooling
C30-A25 N37-A25
CK-3030A Diamond Stone Master C30-A55 N37-A55
Holder Set C30-J65 N37-J65
C30-J85 MM33-J85
CK-3570
Hard Guide Shoe*
CK-3070-NY3X
Delron Guide Shoe
Roughing Stones *Noted as Titanium Guide Shoe in Dart Literature.
HP28DM95 (2 Required) Recommendation from Dart Machinery.
Finishing Stones
HP28DM05 (2 Required)
Note: U
se Sunnen standard CK-3070 Bronze Guide Shoes
when honing Nikasil Cylinders.
For deglazing Nikasil Cylinders, use Sunnen Stone

EHU-412 or C30-A43.
Sunnen Diamond Abrasives for Rottler Hone Head Sunnen Diamond Abrasives for K-Line Hone Head

D37201-P640-4 Set of 4, 320 grit (GMG75) D37201-N671-6 Set of 6, 320 grit (GMG75)
D38201-P640-4 Set of 4, 400 grit (GMG85) D38201-N671-6 Set of 6, 400 grit (GMG85)
D60021-N671-6 Set of 6, 500 grit (GMB95)
For more information ask for Bulletin P-2802
Sunnen Super Abrasive Honing on CV-616

CV616-HN2X .5 Rate Feed Panels
36 1-800-325-3670
CH-100 Line Honing Machine
Accessories and Supplies for CH-100, CHV-31,
CH-20 and Ch-40
Replacement Stones and

Complete Hone Units Shoes
Approx. Stones (5 per box) Shoes (10 per box) Bronze
Diameter Range
Hone Unit Ship. Weight Stone Comments Ship Wt. 1.25 lbs. Ship Wt. 2 lbs. Shoes for
lbs. kg inches mm Length (,57 kg) per box (,9 kg) per box Prod. use
8RY-2400G 27.5 12,5 2.400-2.700 61-69 27" Hone Unit includes 1 set RY24-J49 RG-D RG-B
8RY-2700G 31.2 14,2 2.700-3.000 69-77 27" of 8 stones and 16 shoes RY24-J49 RG-D RG-B
10RY-1800F 34 15,4 1.800-2.100 46-54 24.375" RY18-J49 RF-D RF-B
10RY-2100F 45 20,4 2.100-2.400 54-61 24.375" RY18-J49 RF-D RF-B
10RY-2400G 40 18,1 2.400-2.700 61-69 33.750" RY24-J49 RG-D RG-B
10RY-2700G 45 20,4 2.700-3.000 69-77 33.750" RY24-J49 RG-D RG-B
Hone Unit includes
10RY-3000H 50 22,6 3.000-3.500 77-89 33.750" RY24-J49 RH-D RH-B
1 set of 10 stones
10RY-4500H 60 27,2 4.500-5.000 115-127 33.750" RY24-J49 RH-D RH-B
and 20 shoes
10RY-5000H 70.5 32,0 5.000-5.500 127-140 33.750" RY24-J49 RH-D RH-B
10RY-5500H 80.5 36,6 5.500-6.000 140-152 33.750" RY24-J49 RH-D RH-B
10RY-6000H 97.0 44,1 6.000-6.500 152-165 33.750" RY24-J49 RH-D RH-B
10RY-6500H 113.5 51,6 6.500-7.000 165-178 33.750" RY24-J49 RH-D RH-B
15RY-3500H 85 38,5 3.500-4.000 89-102 50.625” RY24-J49 RH-D RH-B
15RY-4000H 105 47,6 4.000-4.500 102-115 50.625” Hone Unit includes RY24-J49 RH-D RH-B
15RY-4500H 120 54,4 4.500-5.000 115-127 50.625” 1 set of 15 stones RY24-J49 RH-D RH-B
15RY-5000H 107.0 48,6 5.000-5.500 127-140 50.625" and 30 shoes RY24-J49 RH-D RH-B
15RY-5500H 122.0 55,4 5.500-6.000 140-152 50.625" RY24-J49 RH-D RH-B
15RY-6000H 147.0 66,8 6.000-6.500 152-165 50.625" RY24-J49 RH-D RH-B
15RY-6500H 172.0 78,2 6.500-7.000 165-178 50.625" RY24-J49 RH-D RH-B
Call Customer Service, Sunnen Products Co., for price and availability.
Special mandrels available on request.
CH-36 Storage Rack CH-46 Storage Rack Softer Stones for

Free-standing unit Line Honing
provides convenient Aluminum
storage for six Hone Blocks
Units. Top tray Blocks manufactured of aluminum
holds wrenches, require an abrasive with a softer
honing stones, bond. Softer stones allow honing
etc. Rack bottom without the problem of “loading”
catches oil runoff often experienced when honing this
from mandrels. soft material.
The CH-46 is a compact mandrel
Sturdy, heavy steel
storage rack designed to conveniently Application Stone Number
construction. (Hone
mount over the drain pan of the CH-100
Units must be 10RY-1800F RY18-J45
Horizontal Hone. It accommodates
ordered separately.) 10RY-2100F
three 8 or 10 stone mandrels up to 3.0"
(76,2 mm) diameter. 8RY-2400G RY24-J45
thru 15RY-6500F
CCG-100 Cap Checker
Checks the height of main bearing Shipping Weight: 1.25 lbs.
caps referenced from the parting line.
Replacement Parts for (,57 kg) per box
CH-75A Hone Driver
GGN-111A Feed screw with washer GGN-111A
GGN-118C
GGN-118C Feed link
CH-76A Mandrel drive plate with set screws CH-76A
GGN-112A Stone release lever with screws GGN-112A
www.sunnen.com 37
CH-100 Accessories & Supplies
Honing Unit Replacement Replacement Parts for CH-650 Hone Support
Parts CH Drill Motors The CH-650 Hone
Support is intended to be
Honing Centering “T” Hex Adjustment Drill Motor Part Part
used with Sunnen CH-100
Unit Pins Wrench Key Part No. Description No.
Horizontal Hone. It is
8RY-2400G PHP-511 PWM-11A CH-158 Brush Set CH-158-1A designed to aid operator
8RY-2700G PHP-512 PWM-11A CH-168 Brush Set CH-168-2A in loading and unloading
10RY-1800F PHP-511 PWM-9A CH-705 Brush Set CH-726-A of heavy hone units.
10RY-2100F PHP-511 PWM-9A
10RY-2400G PHP-511
CH-40 Horizontal Hone
10RY-2700G PHP-512 CH-455 Driver Kit
10RY-3000H PHP-512 Cradle
10RY-4500H RY-187 Assembly
15RY-3500H RY-184 LN-5785A
Shipping
RY-186 All
15RY-4000H Weight: 256
Mandrels
15RY-4500H RY-187 lbs. (116,4 kg)
10RY-5000H RY-188 PWM-11A
10RY-5500H RY-189
10RY-6000H RY-190
10RY-6500H RY-192 CH-525 Oil
15RY-5000H RY-188 Control
15RY-5500H RY-189 Assembly
Shipping Weight: For the shop that is short on available
15RY-6000H RY-190
12 lbs. (5,4 kg) floor space, line honing capability may
15RY-6500H RY-192 be added to an existing CV-616 or
CK-10 by ordering the CH-40 Horizontal
Hone Driver Kit. Honing units, CH-455
CH-50 Conversion Kit Cradle Assembly, and CH-525 Oil
For customers who have Control Assembly must be ordered
their CV-616 or CK-10 separately.
set up for line hon-
Available Kits:
ing we offer the CH-50
Conversion Kit to convert Part No. Description
their line honing setup CH-40K 115v, 60 Hz (Pearl Gray)
into a CH-100 line honing CH-40A 220v, 50 Hz (Pearl Gray)
machine.
The CH-50 Conversion
Kit includes everything
needed to convert to a
CH-100 except electricals. OHC Line Hone Mandrel
The customer will have to
provide all switches and Part No. Description
receptacles. 7PL-1031M* For VW Rabbit, Omni, Horizon,
Ford 2.5 and 4.6 1.021"-1.094"
Available in Pearl Gray only. Contact Customer Service, Sunnen Products for (25,9-27,8 mm) Extended Range
pricing and delivery. with .125" Shim-1.219" (31,0 mm)
Note: The CH-455 Cradle will no longer be required and cannot be returned for credit. 7PL-1312M* For Mitsubishi 3.0, Chrysler 2.2
and 2.5, Isuzu, Toyota 4 and 5
ME, Mazda GLC, Nissan Z24-
Camshaft Bore Honing Z28, Mitsubishi 2.6 1.292"-1.375"
(32,8-34,9 mm) Extended Range
on Overhead Cam with .125" Shim-1.500 (38,1 mm)
Cylinder Heads WB-D Guide Shoes (2/box)
For the small shop with limited
requirements, mandrels may be P28J27 Stones (12-Roughing)
special ordered to allow honing P28J47 Stones (12-General Purpose)
various O.H.C. cylinder heads. P28J67 Stones (12-Finishing)
Call Customer Service, Sunnen
Products Co. for details and See Product Bulletin P-5501A thru P-5505A
information. for more OHC Mandrel Selections.
*Recommend using with GGN-150 Mandrel
Driver and AN-87 Yoke adapter in CH-100
Cylinder head being honed on CH-100 Honing Machine with a hand fed Porta-Hone. Line Hone Machine.
38 1-800-325-3670
CH-100 Accessories & Supplies
PLB-100 Line Boring Ordering Information
Attachment Part No. Description
Easy to install and operate on PLB-100* Line Boring Attachment
CH-100 Line Hone or CHV-
31 Dual-Tech Hone, and PLB-500 Adjustable Centering Rings (set of two)
costs thousands of includes blades for range from 2.400"-
dollars less than 3.000" (60,9-76,2 mm)
a line boring
machine.
Blade Set range:
Features: PLB-3000 3.000"-3.600" (76,2-91,4 mm)
• Install aftermarket 4-bolt main caps. PLB-3600 3.600"-4.200" (91,4-106,6 mm)
• Bore semi-finished, mismatched and PLB-4200 4.200"-4.800" (106,6-121,9 mm)
metallized caps and blocks and also diesel blocks. PLB-4800 4.800"-5.400" (121,9-137,2 mm)
• Cuts thrust faces with special cutter.
• 1.5" (38,1 mm) hard chrome bar with tool bit holes on
PLB-349 Carbide Tipped Cutter
5" (127,0 mm) centers-length 48" (1220 mm).
• Boring range 1.800-5.250" (45,7-133,3 mm). 1.800"-2.450" (45,7-62,2 mm)
• Lightweight, 15 lbs. (6,8 kg) plus bar.
Indexable Carbide Cutters with insert,
screw and wrench:
Optional Centering Rings PLB-350* 2.450"-3.000" (62,2-76,2 mm)
For other engines. These optional rings PLB-351 3.000"-3.650" (76,2-92,7 mm)
are stepped to provide two sizes per ring. PLB-352 3.650"-4.300" (92,7-109,2 mm)
Example: The standard set PLB-235 will fit a
PLB-353 4.300"-4.950" (109,2-125,7 mm)
small and big block Chevrolet.
Part No. Description PLB-354* Universal Cutter, 3.000" (76,2 mm) long
PLB-2941/3192 2.9412"-2.9425", 3.1922"-3.1930" Fits Ford 351, 352, for chamfering
427, 428, 351M, 351W, 400, 429.
PLB-240 2.4906"-2.4916", 2.8406"-2.8415" Fits 400 small block PLB-355* Chevrolet Thrust Face Cutter, brazed
Chevrolet and small journal pre-1968 283, 327, 302 carbide tip
Chevrolet.
PLB-3438/3188 3.438"-3.439", 3.1880"-3.189" Fits Pontiac 350, 389, PLB-356 .375" (9,5 mm) Wide Thrust Face Cutter
400, 428, 455; Oldsmobile 350N, 400, 425, 455; Buick with brazed carbide tip for all thrust
400, 430, 455, 265, 301, 350, 400. faces except Chevrolet
PLB-2692/2817 2.6925"-2.6935", 2.8175"-2.8185" Fits Chrysler,
Plymouth 340, 318, 301, 273, 383. GAS1K-1 Kit contains five carbide indexable inserts,
PLB-3002/2942 3.0025"-3.003", 2.9425"-2.9435" Fits Chrysler, screws and one wrench
Plymouth 360, 170, 198, 225, 413, 426, 440.
Note: Sizes may be combined on special order. TB907A Package of 1 carbide indexable insert
Call Customer Service, Sunnen Products Co.
LN-570A* Concentric Sleeve. Adapts boring bar
to CH-75A Hone Driver.
PLB-1200 Cam Boring Attachment
1.25" Boring Bar PM-1500A Micrometer Setting Gage.
Turn your present line hone into a cam boring machine for
Range: 1.500"-4.125"
V6 and V8 blocks. The PLB-1200 allows you to install over-
size bearings and roller bearings in performance blocks. (38,1-104,8 mm)
Boring Range: 2.000 to 2.750 in. (50,8-69,85 mm)
Hex T Wrenches
Part No. Description PWMM-3A* .118" (3 mm) for setting tool bits
PWMM-5A* .197" (5 mm) for feed collar bind bolt
PLB-1200A Cam Boring Attachment (includes the following):
PLB-1400A Cam Boring Stand
PLB-1300A PLB-100 Mounting Adapter See optional centering PLB-235* Centering Rings for small block and
PLB-1260A Stud Drive Shaft rings on this page big block Chevrolet
PLB-1235A Adjustable Bushings (Pkg. Of 2) Not pictured PLB-600A Thrust Cutter Attachment
PLB-1275A Adjustable Tool Bit
PLB-1280A Adj. Pilot Lock Tool *Standard equipment with PLB-100. Shipped in 2 pieces.
PLB-1290A Adj. Pilot Lock Tool Bar: 33 lbs. (73 kg). Housing: 37 lbs. (81,4 kg).
PLB-1210 Boring Bar Assembly
PM-1733A Micrometer (for setting tool bits)
Tooling Required for 2.250" - 2.750"
(57,15 - 69,88 mm)
PLB-2400A Blade Set
PLB-1295 Tool Bit
www.sunnen.com 39
Portable Hones & Accessories
Sunnen Portable Cylinder Hones
Select stone sets desired on next page. Recommended Stone Sets for Sunnen
• The fastest and most accurate (to one-half thousandth) SNJ-10 Portable Hone
portable hone for cylinder reconditioning in cars, trucks, Stone Sets
tractors, stationary engines.
SNJ1- SNJ2- SNJ3-
• The only method that maintains alignment of the Diameter Range
1.250"-1.437" 1.418"-1.604" 1.580"-1.770"
original bore. 31,75-36,50 mm 36,02-40,74 mm 40,13-45,00 mm
• Reconditions cylinder bore with less stock removal than Deburring in Rough
other methods-assures longer block life. Bores, All Materials SNJ1-A47 SNJ2-A47 SNJ3-A47
• Produces any finish specified by engine and ring Fast Stock Removal
manufacturers. in Bored, Ground or
Deburred Holes in the
• Recommended for fast seating of chrome or moly rings. following materials:
• Correct stone length. Aluminum or Bronze SNJ1-J45 SNJ2-J45 SNJ3-J45
• Fast stock removal-up to five thousandths (0,13 mm) Soft Brass SNJ1-J63 SNJ2-J63 SNJ3-J63
per minute. Cast Iron SNJ1-J45 SNJ2-J45 SNJ3-J45
• Can be set up in a few minutes-no studs to remove. Soft Steel SNJ1-A45 SNJ2-A45 SNJ3-A45
• All cylinder hones include AN-1105A molded storage box. Hard Steel (First Choice) SNJ1-A45 SNJ2-A45 SNJ3-A45
Hard Steel
(If A45 does not cut) SNJ1-A43 SNJ2-A43 SNJ3-A43
SNJ-10 Portable Hone Very Hard Steel)
(If A43 does not cut) SNJ1-J63 SNJ2-J63 SNJ3-J63
Range: 1.250"-1.770" (31,5 mm-45,0 mm)
Fine Finishing in the
The SNJ-10 Portable Hone is recommended following materials:
for sizing and finishing small holes in parts Aluminum or Bronze SNJ1-J87 SNJ2-J87 SNJ3-J87
too heavy or awkward to stroke on a honing Soft Brass SNJ1-J85 SNJ2-J85 SNJ3-J85
machine.
Cast Iron SNJ1-J87 SNJ2-J87 SNJ3-J87
Includes a 2" (50,88 mm) drive shank and Soft Steel SNJ1-J87 SNJ2-J87 SNJ3-J87
12" (304,8 mm) extension.
Hard Steel SNJ1-J85 SNJ2-J85 SNJ3-J85
Shipping Weight: Approx. 5 lbs. (2,3 kg)
Note: A
ll stone sets must be ordered separately.
See page 42 for Plateau Honing Tools.
40 1-800-325-3670
SN-75 Midget Portable

Cylinder Hone
Range: 1.75"-2" (44-51 mm)
Recommended for small compressors,
outboard motors and similar small bore
engines.
Note: A
ll stone sets must be ordered
Includes 2" (50,8 mm) drive shank and separately.
12" (304,8 mm) extension. Shipping Weight: Approx. 5 lbs. (2,3 kg)
JN-95 Junior Portable Note: A

separately.
Cylinder Hone
Range: 2"-2.6" (50,8-66 mm) Stone Set Range:
Ideal for outboard motors, motorcycle and 2.0"-2.2" (50,8-55,9 mm)
similar small bore engines within its range. 2.2"-2.4" (55,9-60,9 mm)
Includes 2" (50,8 mm) drive shank and 2.4"-2.6" (60,9-66,0 mm)
12" (304,8 mm) extension. Shipping Weight: Approx. 5 lbs. (2,3 kg)
AN-111 Standard Portable

Cylinder Hone
Range: 2.5"-7" (63 mm-178 mm)
Shipped with roughing and medium
finishing stone sets, (M27J17) for
range 2.7"-4.1" (69-104 mm) (M27J55).
Stone sets available for complete range Note: A
2.5"-7" (63-178 mm). Includes 12" separately.
(304,8 mm) drive shank. Shipping Weight: Approx. 9 lbs. (4,1 kg)
AN-112 Standard Portable

Cylinder Hone
Same as AN-111 except does not
include any stone sets. Includes Note: All
stone sets must be ordered
2" (50,8 mm) drive shank and 12" separately.
(304,8 mm) extension. Shipping Weight: Approx. 7 lbs. (3,2 kg)
AN-815 Heavy-Duty Cylinder Hone

Range: 2.5"-15" (63-381 mm)
Recommended for truck and stationary engines
with cylinder bores 2.5"-15" (63-381 mm). Note: Order
stone sets, master holder sets
Equipped with heavy-duty universal joint, and stone supports separately.
6" (152 mm) drive shank and 12" (304,8 mm) Shipping Weight: Approx. 9 lbs. (4,1 kg)
shank extension.
Note: See chart at right for Stone Sets.
www.sunnen.com 41
So that we may better serve all of our customers, Sunnen has consolidated our Please be assured, only the part number has changed. The part you order is the
parts numbering system. This allows us to offer the highest quality tooling and abra- same quality Sunnen part that you have come to depend on for the industry stan-
sives at the lowest possible price. This catalog has both the “old” numbers and the dard engine building honing equipment.
new numbers, so that you can make the transition.
Stone Sets for Sunnen Portable Cylinder Hones

For Use in Old New Old New Old New Old New Stone
Cylinder Diameter Range Roughing Roughing Finishing Finishing Med. Finish Med. Finish Fine Finish Fine Finish Extra Fine Polishing Length
Hone When Used In Stone Set Stone Set Stone Set Stone Set Stone Set Stone Set Stone Set Stone Set Finish Stone Stone Set
Models inches mm (70 Grit) (70 Grit) (150 Grit) (150 Grit) (220 Grit) (220 Grit) (280 Grit) (280 Grit) Set (400 Grit) (600 Grit) in mm
SN Midget 1.75-2.0 44-51 Cast Iron SN-100 S18-J17 SN-200 S18-J45 SN-300 S18-J55 SN-500 S18-J65 S18-J87 S18-CO5* 4 102
2.0-2.2 51-56 Cast Iron JN-100 T20-J17 JN-200 S20-J45 JN-300 T20-J55 JN-500 T20-J65 T20-J87 T20-CO5 4 102
Hardened Sleeves JN-130 T20-J11 JN-230 T20-J43 – – JN-530 T20-J63 T20-J85 – 4 102
JN 2.2-2.4 56-61 Cast Iron JN-101 U22-J17 JN-201 U22-J45 JN-301 U22-J55 JN-501 U22-J65 U22-J87 U22-CO5* 4 102
Junior Hardened Sleeves JN-131 U22-J11 JN-231 U22-J43 – – JN-531 U22-J63 U22-J85 – 4 102
2.4-2.6 61-66 Cast Iron JN-102 V24-J17 JN-202 V24-J45 JN-302 V24-J55 JN-502 V24-J65 V24-J87 V24-CO5* 4 102
Hardened Sleeves JN-132 V24-J11 JN-232 V24-J43 – – JN-532 V24-J63 V24-J85 – 4 102
2.5-2.7 63-70 Cast Iron AN-115 G25-J17 AN-215 G25-J45 – G25-J55 AN-515 G25-J65 G25-J87 G25-CO5 4 102
2.7-4.1 69-104 Cast Iron AN-100 M27-J17 AN-200 M27-J45 AN-300 M27-J55 AN-500 M27-J65 M27-J87 MM33-CO5† 4 102
Short C. Iron Cyls. AN-100-71 M27-J17-71 AN-200-71 M27-J45-71 AN-300-71 M27-J55-71 AN-500-71 M27-J65-71 – – 2.8125 71
Deutsch Diesel Cyls. AN-100-F – – – – – – – – 4 102
VW Air Cooled Cyls.
Harley Davidson
AN Chilled Iron Liners
Standard
and Hardened Sleeves AN-130 M27-J11 AN-230 M27-J43 – – AN-530 M27-J63 M27-J85 MM33-CO5† 4 102
Heavy Steel – – AN-200A M27-A45 – – AN-500A M27-A65 M27-J87 MM33-CO5† 4 102
Duty 3.5-5.5 89-139 Cast Iron AN-101 N37-J17 AN-201 N37-J45 AN-301 N37-J55 AN-501 N37-J65 N37-J87 NN40-CO5† 4 102
Short C. Iron Cyls. AN-101-71 N37-J17-71 AN-201-71 N37-J45-71 AN-301-71 N37-J55-71 AN-501-71 N37-J65-71 – – 2.8125 71
Hardened Sleeves AN-131 N37-J11 AN-231 N37-J43 – – AN-531 N37-J63 N37-J85 NN40-CO5† 4 102
Steel – – AN-201A N37-A45 – – AN-501A N37-A65 N37-J87 NN40-CO5† 4 102
4.7-15.0 119-381 Cast Iron AN-106 W47-J17 AN-206 W47-J45 AN-306 W47-J55 AN-506 W47-J65 W47-J87 WW51-CO5† 4 102
‡ ‡ Hardened Sleeves AN-136 W47-J11 AN-236 W47-J43 – – AN-536 W47-J63 W47-J85 WW51-CO5† 4 102
Steel – – AN-206A W47-A45 – – AN-506A W47-J65 WW51-CO5† 4 102
2.5-3.3 64-84 Ported Cylinders – GY25-J15* – GY25-J45 – – – GY25-J65 GY25-J85 4 102
AN 3.3-4.2 84-107 Ported Cylinders – MY33-J15* – MY33-J45 – – – MY33-J65 MY33-J85 4 102
Keyway 4.0-5.6 102-142 Ported Cylinders – NY40-J15* – NY40-J45 – – – NY40-J65 NY40-J85 4 102
4.5-6.0 114-152 Ported Cylinders – WY51-J15 – WY51-J45 – – – WY51-J65 WY51-J85 4 102
Approximate Surface Cast Iron 120 – 45 – 32 32 20 – 8 3 – –
Finish in Hardened Sleeves 55 – 30 – 20 20 12 – 5 2
Microinches (Ra) Steel – – 32 – 20 20 15 – 7 3
*Special, two week after receipt of order. †Range on these sets as follows: MM33-3.3"– ‡Use this series of Stone Sets with Master
4.2"(84–107 mm), NN40-4.0"–5.6" (102–142 Holder Sets and Stone Support (order
mm), WW51-4.5"–9.2" (114–234 mm). below). Shipping Weight of all Stone Sets
approximately 1.25 lbs. (.5 kg) per set.
Stone Supports and Master Holder Sets

Single Length Master Holder Sets Stone Supports Double Length Master Holder Sets
For range 4.7"–15.0" To provide stability and prevent For range 4.7"–15.0"
(119–381 mm). chatter, stone supports must (119–381 mm). Uses two
One required for each be used in diameters above sets of stones in line for 8.0"
range shown. Order stone 6.0" (152 mm). For use with both (203 mm) stone length. One
sets separately. single length and double length required for each range shown.
For Use Master Holder Sets. Order stone sets separately.
In All
AN Model Range Part Number Part Number Range Part Number
Cylinder inches mm Ship Wt. 3 lbs (1,4 kg) Ship Wt. 2.5 lbs. (1,1 kg) inches mm Ship Wt. 5 lbs (2,3 kg)
Hones
4.7–7.0 119–178 AN-355 Not required 4.7–7.0 119–178 AN-855
6.0–9.0 152–229 AN-365 AN-260 6.0–9.0 152–229 AN-865
8.0–12.0 203–305 AN-375 AN-280 8.0–12.0 203–305 AN-875
11.0–15.0 279–381 AN-385 AN-290 11.0–15.0 279–381 AN-885
PHT Plateau Honing Tools

For Diameter Range Abrasive Sets * For Diameter Range Abrasive Sets *
Hone Body Hone Body
inches mm (320 GRIT) inches mm (320 GRIT)
1.50-1.69 38,1-42,9 SNJ1-PHT-732 2.40-2.60 60,9- 66,0 JN0-PHT-732
1.67-1.86 42,4-47,2 SNJ2-PHT-732 JN 2.60-2.80 66,0-71,1 JN1-PHT-731
SNJ 1.75-1.94 44,4-49,3 SNJ3-PHT-732 2.80-3.00 71,1-76,2 JN2-PHT-731
1.91-2.10 48,5-53,3 SNJ4-PHT-732 AN Standard 2.98-3.78 75,7-96,0 GG-PHT-732
2.08-2.27 52,8-57,6 SNJ5-PHT-732 and 3.78-4.68 96,0-118,9 MM-PHT-731
SN 2.15-2.40 54,6-60,9 SN-PHT-732 Heavy-Duty 4.48-6.08 113,8-154,4 NN-PHT-731
AN-60 4.98-9.68 126,5- 245,9 WW-PHT-731
* Special order 2 weeks after receipt of order
42 1-800-325-3670
Honing Aluminum Alloys
High-Silicon Aluminum Alloy ANR-275 Remote Feed Heavy-Duty

Such as Porsche, Mercedes, Honda and Vega. Cylinder Hone
Range: 2.5"-15" (63 mm-381 mm)
Note: Sunnen
MAN-845 or
MB-30 is MANDATORY
when honing ALL
aluminum.
Tooling Required When Honing High

Silicon Aluminum Blocks Must be used in a machine or honing rig. Illustration shows
• N-111, AN-112 or AN-815 Cylinder Hone
A the ANR-275 Portable Hone assembled with Stone Support,
• AN-80 Quick Coupler Single Length Master Holder Set, Stone Set and 3" (76 mm)
Drive Shank. 4" (104 mm) stone length or 8" (203 mm)
• AN-1060 Heavy Duty Drill Motor stone length when two sets of stones are used with
• MM33-J63 Roughing Stone Set Double Length Master Holder Set.
• MM33-J85 Finishing Stone Set Shipping Weight: 13 lbs. (5,9 kg)
• MM33-C05 Polishing Stone Set
• MM33-F05 Felt Set Order stone sets, master holder sets and stone
supports separately.
• AN-30 Sunnen Silicon Compound
• AN-35 Storage Box
• GA-2125 or GR-2125 Dial Bore Gage
• MAN-845 Honing Oil
AN-980 Chamfering Cone 6 Replacement Cones in package:

Order AN-994A
Chamfers the sharp edges of cylinders for safe piston and
ring installation. Handles all diameter cylinders or sleeves. Shipping Weight: 1 lb. (,45 kg)
Unit consists of tapered neoprene cone covered by long-
lasting replaceable abrasive cone (plus a spare). AN-980 Replacement Parts
Easy to use with .25" (6,3 mm) or larger drill. Part No. Description
Shipping Weight: 1.5 lbs. (,68 kg) AN-991A Extension
Superabrasive Stone Sets Vitrified Bond Diamond and Resin CBN Sets These Teflon Hones are used following a 400
Metal Bond Diamond and CBN Stone Sets For honing carbide, ceramic, glass and hard- grit finishing stone. The recommended proce-
Available in G25, M27, N37, and W47 stone ened steel. Available in 3.25" (82,55 mm) or 4" dure when using Teflon stones is to use them
sizes. These stones can be used to increase (101,6 mm) stone length. For 3.5" (82,55 mm) dry and with light pressure. Eight full passes up
stock removal rates or abrasive life when length, add -85 to stone number. and down the cylinder wall is usually sufficient.
compared to A or J stones or Resin or Vitrified
Diamond or CBN stones. First time users of Diamond Stone CBN Stone Teflon-Mounted Hone Holders Available
metal bond superabrasive stone sets must order DV-47 NR53 Resin Bond 4 8 Diameter Range
____-KB5X (G25-KB5X) Master Holder Set. DV-57 NR83 Resin Bond Strips Strips mm in.
DV-87 — GG25-XB25+ GY25-XB25+ 64-84 2.5-3.3
Replacement stones can be ordered without
DV-07 — MM33-XB25+ MY33-XB25+ 84-107 3.3-4.2
reordering KB5X Master Holders. NN40-XB25+ NY40-XB25+ 102-142 4.0-5.6
Master W47-XB25+ WY51-XB25+ 114-11524,0 4.5-60
Holder Stone Set Diameter Range Additional Portable Accessories
Teflon-Mounted Hone Holders for Portable Hones + Special Order - Contact Customer Service
Number Number mm in.
Used to “finish” oil-free air compressor cylinder PHT Plateau Honing Abrasive 320 Grit Sets
G25-KB5X G25-_____XG55 64-69 2.5 - 2.7
69-104 2.7 - 4.1 sleeves. Provides a “slippery” Teflon coating For AN, ANR, GNH and GNR Hones Sunnen’s PHT
M27-KB5X M27-_____XG55
N37-KB5X N37-_____XG55 89-140 3.5 - 5.5 that is compatible with Teflon rider rings. Made tools are used as a final finishing step, after initial
W47-KB5X W47-_____XG55 104-533 4.1 - 21 from 15% glass filled Teflon and are used on honing to provide a plateau surface on cylinder walls.
Sunnen Model AN-112, AN-815, and ANR-275 en’l. Purpose Production Diameter Range
G
The ____ in the stone set number is for the Portable Hones. (Smaller sizes are available 4 Brushes 8 Brushes mm in.
metal bond abrasive code. This stone set con- for JN/JNR, and SN/SNR Portable Hones on GG-PHT-732 GY-PHT-732 75,7-96,0 2.98-3.78
sists of two L16 super-abrasive stones and (6) a special order basis. Call Sunnen Products, MM-PHT-731 MY-PHT-731 96,0-118,9 3.78-4.68
A43CFG (G25), AN43BFG (M27), AN62BFG (N37), Customer Service Department for information.) NN-PHT-731 NY-PHT-731 113,8-154,4 4.68-6.08
or AN341AFG (W47) roughing guides. WW-PHT-731 WY-PHT-731 126,5-1524,0 4.98-60.0
www.sunnen.com 43
Drive Shanks and Shaft Extensions for AN-1060 Drill Motor Kit (115V, 60Hz)
ANR-275 Hone For Sunnen Portable Equipment and Cylinder Hones
Furnished with 3" (76 mm) Drive Shank. Other shanks or
extensions may be selected from the table below to make up
any practical length (either drive shank can be used with any
combination of extensions).
Replacement Shaft
Drive Shanks Extensions Shipping
Length
Weight
inches mm lbs. kg
3 76 AN-608A None .33 ,15
6 152 AN-618A None .66 ,30
9.25 235 None ANR-741 2 ,91
19 483 None ANR-742 4 1,2
42.75 1086 None ANR-744 8 3,6
72.25 1835 None ANR-746 13 5,9
The AN-1060 Drill Motor has a speed torque relationship that
GGN-150 Portable Mandrel Driver is not found in ordinary electric drills. The power unit operates
at 115V, has a no-load speed of 250 rpm and a full-load speed
of 165 rpm. Has a full-load amp draw of 11 amps. Supplied
with quick coupler, CH-179 adapter, and AN-97 and AN-87
yoke adapters. Optional CH-85 quick coupler.
For portable honing applications such as spindle bushings

mounted on axles, and other jobs that cannot be taken to
AN-1055 Drill Motor Kit (220V, 50Hz)
honing machine. Recommended for use with Lifetime Honing (Does not come equipped with electrical plug)
Units. For holes .75" (19,1 mm) I.D. and larger, where length
is at least 4 times the diameter. Graduated adjustment knob
advances and retracts honing stones. Use with any half-inch “Quick-Coupler”
drill (12,7 mm) or larger, 450 rpm or less. Includes Yoke Adapter
Shipping Weight: 1 lb. (,45 kg)
Yoke Adapter Drive shaft screws
screws into hone’s into this end.
AN-1075 Speed Control Unit drive yoke.
Two models fit all Sunnen Cylinder Hones-make cylinder

honing an easier, faster operation.
Permits drill (electric or air) to be quickly coupled or uncou-
pled from cylinder hone. Allows operator to have both hands
Furnished with on/off switch, fuse, AC cord and grounded AC free for removing hone from cylinder or for stone changing
outlet plug. Reduces rpm when used with AC/DC drill motors operations.
and motors (brush-type only) where ampere rating is 15
AN-80 Quick-Coupler. Used with all SN, JN and standard
amps or less.
AN model Cylinder Hones.
AN-85 Quick-Coupler. For use with AN-815 Heavy-Duty
Cylinder Hones.
Extra Yoke Adapters
AN-87 For use with AN-80 Quick-Coupler.
AN-97 For use with AN-85 Quick-Coupler.
Shipping Weight: .5 lb. (,23 kg)
44 1-800-325-3670
Stone Sets for AN, ANR, GNH & GNR Honing Units
AVAILABLE
STONES:
In some cases, stones For Holes Without Keyways For Holes With Keyways
other than those
recommended may
hone faster or last
longer. For long or
repetitive production
runs, it may be
economical to choose
a stone slightly harder
or softer, coarser
or finer. If the stone
wears out too fast,
use a harder stone; if
it does not cut, use a
softer stone. Stones
in parentheses ( ) Keyway Stone Sets
available 2 weeks
after receipt of order. Maximum Keyway Width
.8" .9" 1.2" 1.4"
General Purpose Stone Sets Guideless Stone Sets
(20,3 mm) (22,8 mm) (30,4 mm) (35,5 mm)
2.5"-2.7" 2.7"-4.1" 3.5"-5.5" 4.1"-60"† 2.5"-3.3" 3.3"-4.2" 4.0"-5.6" 4.5"-60"† 2.5"-3.3" 3.3"-4.2" 4.0"-5.6" 4.5"-60"†
Grit (84-107
(64-69 (69-104 (89-140 (104-152 (64-84 (84-107 (102-142 (114-152 (64-84 (102-142 (114-1524
Size mm) mm) mm) mm) mm) mm) mm) mm) mm) mm) mm) mm)
36 H/S GG25-XM51 MM33-XM51 NN40-XM51 WW51-XM51 GY25-XM51 MY33-XM51 NY40-XM51 WY51-XM51

80 (2) Soft G25-A23 M27-A23 N37-A23 W47-A23 WY51-A23
G25-A25 M27-A25 N37-A25 W47-A25 GG25-A25 MM33-A25 NN40-A25 WW51-A25 GY25-A25 MY33-A25 NY40-A25 WY51-A25
Hard G25-A27 M27-A27 N37-A27 W47-A27
Aluminum Oxide
150 (4) Soft G25-A43 M27-A43 N37-A43 W47-A43 GG25-A43 MM33-A43 NN40-A43 WW51-A43 GY25-A43 MY33-A43 NY40-A43 WY51-A43
G25-A45N M27-A45N N37-A45N W47-A45N GG25-A47 MM33-A47 NN40-A47 WW51-A47 GY25-A47 MY33-A47 NY40-A47 WY51-A47
G25-A47 M27-A47 N37-A47 W47-A47
Hard M27-A49 N37-A49 W47-A49
220 (5) Soft
M27-A55 N37-A55 W47-A55
Hard W47-A57
280 (6) Soft M27-A63 W47-A63
Hard G25-A67 M27-A67 N37-A67 W47-A67
†These stones require Master Holder Sets.
www.sunnen.com 45
Stone Sets for AN, ANR, GNH & GNR Honing Units
AVAILABLE
STONES:
In some cases, For Holes Without Keyways For Holes With Keyways
stones other than
those recommended
may hone faster or
last longer. For long or
repetitive production
runs, it may be
economical to choose
a stone slightly harder
or softer, coarser
or finer. If the stone
wears out too fast,
use a harder stone; if
it does not cut, use a
softer stone. Stones
in parentheses ( ) Keyway Stone Sets
available 2 weeks
after receipt of order. Maximum Keyway Width
.8" .9" 1.2" 1.4"
General Purpose Stone Sets Guideless Stone Sets
(20,3 mm) (22,8 mm) (30,4 mm) (35,5 mm)
2.5"-2.7" 2.7"-4.1" 3.5"-5.5" 4.1"-60"† 2.5"-3.3" 3.3"-4.2" 4.0"-5.6" 4.5"-60"† 2.5"-3.3" 3.3"-4.2" 4.0"-5.6" 4.5"-60"†
Grit (102-142
(64-69 (69-104 (89-140 (104-152 (64-84 (84-107 (102-142 (114-152 (64-84 (84-107 (114-1524
Size mm) mm) mm) mm) mm) mm) mm) mm) mm) mm) mm) mm)
70 (1) Soft M27-J11 N37-J11 W47-J11
M27-J13 N37-J13 W47-J13
G25-J15 M27-J15 N37-J15 W47-J15 GG25-J15 MM33-J15 NN40-J15 WW51-J15 GY25-J15 MY33-J15 NY40-J15 WY51-J15
G25-J17 M27-J17 N37-J17 W47-J17 GY25-J17 WY51-J17
Hard W47-J19
150 (4) Soft M27-J43 N37-J43 W47-J43 WY51-J43
Silicon Carbide
Hard G25-J47 M27-J47 N37-J47 W47-J47 GY25-J47 MY33-J47 WY51-J47

220 (5) Soft
G25-J55 M27-J55 N37-J55 W47-J55
Hard M27-J57 N37-J57
280 (6) Soft G25-J63 M27-J63 N37-J63 W47-J63 MM33-J63 GY25-J65 MY33-J65 NY40-J65 WY51-J65
G25-J65 M27-J65 N37-J65 W47-J65 GG25-J65 MM33-J65 NN40-J65 WW51-J65 GY25-J67 MY33-J67 WY51-J67
Hard G25-J67 M27-J67 N37-J67 W47-J67 MM33-J67
400 (8) Soft W47-J83
Hard G25-J87 M27-J87 N37-J87 W47-J87 GG25-J87 MM33-J87 NN40-J87 WW51-J87 GY25-J87 MY33-J87 NY40-J87 WY51-J87
500 (9) Soft
G25-J95 M27-J95 N37-J95 W47-J95 GG25-J95 MM33-J95
Hard W47-J97
600 (0) G25-CO5 M27-CO5 N37-CO5 W47-CO5 GG25-CO5 MM33-CO5 NN40-CO5 WW51-CO5
†These stones require Master Holder Sets.
46 1-800-325-3670
SN-75 Hone JN-95 Hone
AN-26A (.5" (12,7 mm) Chuck Required) AN-26A (.5" (12,7 mm) Chuck Required)
AN-28 AN-28
SN-11 JN-23A JN-30 JN-11 JN-23A JN-30

SN-11 Hone Body JN-11 Hone Body
JN-30 Universal Joint Complete JN-30 Universal Joint Complete
JN-23A Adjusting Nut and Washer JN-23A Adjusting Nut and Washer
AN-26A 3" (76,2 mm) Drive Shaft AN-26A 3" (76,2 mm) Drive Shaft
AN-241 12" (304,8 mm) Extension Assembly AN-241 12" (304,8 mm) Extension Assembly
AN-111 and AN-112 Hones AN-815 Hone
AN-26A (.5" (12,7 mm) Chuck Required) AN-618A (.625" (15,9 mm) Chuck Required)
AN-28 AN-841
AN-4 AN-3A AN-50 AN-16 AN-604 AN-3A AN-650 AN-16

AN-4 Hone Body AN-650 Universal Joint
AN-50 Universal Joint Complete AN-604 Hone Body
AN-16 Center Pinion Adjustment AN-16 Center Pinion
AN-3A Body Gear AN-3A Body Gear Set
AN-26A 3" (76,2 mm) Drive Shaft AN-618A 6" (152,4 mm) Drive Shaft
AN-241 12" (304,8 mm) Extension Assembly AN-841 12" (304,8 mm) Extension Assembly
AN-241 Drive Shaft AN Extension Couplers

12" (304,8 mm), .4375-14 Thread Allows assembly of two or more AN-241 or AN-841 extensions
This is an economically priced replacement drive shaft for for a longer reach with SN, JN and AN portable hones.
use with the SN-75, JN-95, AN-111, and AN-112 portable AN-630A .4375-14 Thd., for SN, JN, AN-111
hones. Supplied as standard equipment with the AN-111. and AN-112 portable hones.
Requires .5" (12,7 mm) chuck AN-640A .625-11 Thd., for the AN-815.
Shipping Weight: .75 lb. (,34 kg) Shipping Weight: .25 lb. (,11 kg)
www.sunnen.com 47
Lifter Bore Honing in V-6 and Tooling Required for Tall Deck Blocks
V-8 Cylinder Blocks For Complete
Special mandrels are available for honing lifter Honing Unit Order
bores in V-type engines. The mandrels are
extended length keyway type. A keyway 1 2 3 4 5 6
type mandrel is the best mandrel for this Part No. Description
type of bore because it adds stability 1 AAY20-869BH-LK7X Extended Mandrel, 8.25" (20,9 cm) reach
for this hand honing operation and Used with .875 dia. Diameter Range: .869"-.900"
also because of the typically large oil (22,07-22,86 mm)
ports in the sides of the bore. The 1 AAY20-838BH-LK7X Extended Mandrel, 8.25" (20,9 cm) reach
recommended power source is a
.375" (10 mm) chuck capacity Used with .843 dia. Diameter Range: .838"-.869"
air drill with an approximate (21,29-22,07 mm)
speed of 250 rpm. Honing 1 AAY20-900BH-LK7X Extended Mandrel, 8.25" (20,9 cm) reach
oil is required. Used with .906 dia. Diameter Range: .900"-.931"
(22,86-23,65 mm)
1 AAY20-931BH-LK7X Extended Mandrel, 8.25" (20,9 cm) reach
Used with .937 dia. Diameter Range: .931"-.962"
Tooling Required for Small Block Chevy (23,65-24,43 mm)
For Complete 2 Y20-W-LK7X Extended Wedge
Honing Unit Order 2 Y32-1062PB-LP3X For Nascar Blocks, 8" (20,3 cm) reach
1 2 3 4 5 6 3 LN-3688A-LK7X Extended Retainer
Part No. Description 4 P-180* Honall Head and Driver
1 AAY20-838BH-6LH Extended Mandrel, 6" (15,2 cm) reach 5 PAK20*-A Adapter
Used with std. Diameter Range: .838"-.869" 6 Y20-J67* Recommended Stone
.843 dia. GM lifter (21,29 - 22,07 mm)
1 AAY20-869BH-6LH Extended Mandrel, 6" (15.2 cm) reach. For other applications, call Customer Service, Sunnen
Used with .875 dia. Diameter Range: .869"-.900" Products Co.
Ford lifter (22,07-22,86 mm) Shipment: Items marked with an asterisk (*) are shipped from
2 Y20-W6LH Extended Wedge finished goods.
3 LN-3688A-6LH Extended Retainer Items not marked with an asterisk (*) are specials and are not
shipped from stock. (If needed immediately call Customer
4 P-180 Honall Head and Driver
Service, Sunnen Products Co. to check Special Products
5 PAK20-A Adapter stock.)
6 Y20-J67 Recommended Stone
Tooling Required for 231 Buick

For Complete
Honing Unit Order
1 2 3 4 5 6
1 AAY20-869BH-675LH Extended Mandrel, 6.75" (17,1 cm) reach
Ford lifter (22,07-22,86 mm)
1 AAY20-838BH-675LH Extended Mandrel, 6.75" (17,1 cm) reach
GM lifter (21,29-22,07 mm)
2 Y20-W-675LH Extended Wedge
3 LN-3688A-675LH Extended Retainer
4 P-180 Honall Head and Driver
5 PAK20-A Adapter
6 Y20-J67 Recommended Stone
Note: C
ould be used on the V-8’s but is not as stable as the
shorter 6" (15,2 cm) reach mandrel
48 1-800-325-3670
Piloted Portable Hones
Use to hone one bore in line with another

bore on the same axis.
Three models cover the diameter range
of 44,5-533,4mm (1.75"-21").
AN-815-A40X Piloted Portable Hone

Diameter Range: 63.5mm-533.4mm (2.50"-21")
The SN-75-887X and JN-95-887X Piloted Portable Hones The SN-75-887X Piloted Portable Hone uses the same S18
are furnished with a 25,4 mm (1") diameter pilot bar. The stone sets as the SN-75 Portable Hone. The JN-95-887X
AN-815-A40X is furnished with a 38,1 mm (1-1/2") diameter Piloted Portable Hone uses the same T20, U22 or V24 stone
pilot bar. The pilot bar must be long enough so that it will not sets as the JN-95 Portable Hone. See page 42 for stone
stroke out of the pilot bushing during the honing operation. selection. Stone sets, stone supports and master holder sets
BE SURE TO SPECIFY PILOT LENGTH BAR on your order. used with the AN-815-A40X Piloted Portable Hone are found
on page 42.
The pilot bushing is made by the user. It must be made to fit
the bore before and after honing. The bushing O.D. should These hones may be driven by a heavy duty electric or air
be tapered to fit the bore opposite the bore being honed. The drill, or used in a drill press. To establish optimum rpm for
bushing l.D. should be ,025 mm (.001") larger than the diam- your application, divide 1200 by the hole diameter in inches.
eter of the pilot on the hone. Example: 1200÷6" = 200 (RPM). Or, divide 30000 by bore
diameter in mm. Example: 30000÷150 mm = 200 (RPM).
The hone is used first in one bore with the pilot bushing posi-
tioned in the other bore. When this bore is finished, the pilot Hole Size Recommended Drill
bushing is placed in the honed bore and the hone is entered Chuck Size
from the other side to finish the second bore. Both outside in mm in mm
ends of the tandem bores must be accessible. 1.75-5 44,45-127,0 5/8 15,8
SN-75-887X Piloted Portable Hone, 44,5 mm-50,8 mm 5-15 127,0-381,0 3/4 19,0
(1.75"-2.00") diameter range, includes 76,0 mm (3") drive 15 and up 381,0 and up 1 25,4
shaft, 304,8 mm (12") shaft extension, and 25,4 mm (1")
diameter pilot bar up to 610 mm (24") long (does not include
stone sets). A universal joint is built into each of these piloted portable
hones. A second universal joint is required when the driving
JN-95-887X Piloted Portable Hone, 50,8 mm-60,0 mm power is obtained from a drill press, or other rigid stroking
(2.00"-2.60") diameter range, includes 76,0 mm (3") drive device to provide the necessary full floating action at the hon-
shaft, 304,8 mm (12") shaft extension, and 25,4 mm (1") ing head as shown below:
diameter pilot bar up to 610 mm (24") long (does not include
stone sets). For Piloted Order Additional
Portable Hone Universal Joint
Extra length 25,4 mm (1") diameter pilot bar for SN-75-887X SN-75-887X AN-70
or JN-95-887X hones will be supplied at an added price per JN-95-887X AN-70
foot or portion thereof, over the 610 mm (24") furnished with AN-815-A40X AN-670 (Heavy-Duty)
the hone.
AN-815-A40X Piloted Portable Hone, 63,5 mm-533,4 mm SNJ-8-749 Piloted Portable Hone
(2.50"-21.00") diameter range for light duty use in diameters In-line honing for Harley
larger than 381 mm (15"), includes 152,4 mm (6") drive shaft, Davidson® engine and
304,8 mm (12") shaft extension, and 38,1 mm (1.5") diameter transmission cases.
pilot bar up to 610 mm (24") long (does not include stone Allows you to locate from
sets, stone supports or master holder sets). tapered bearing side to
Extra length 38,1 mm (1.5") diameter pilot bar for AN-815- ensure precise alignment
A40X hone will be supplied at an added price per foot or por- on straight bearing side.
tion thereof, over the 610 mm (24") furnished with the hone. Also eliminates the need
of lapping bearing.
www.sunnen.com 49
Gages for Valve Guides and Seats
P-310 Valve Guide Gage Set Sunnen VRC-500 VS-1005 Rapid Valve
The only Precision Valve Checker Seat Checker
way to be Provides a means of
sure clear- checking the runout of The VS-1005 Rapid Valve Seat
ance is the engine valve face in Checker can be used on other manu-
correct is relation to the valve stem. facturers’ pilots by ordering these indi-
to GAGE IT! Features: Wide Range of Valve Sizes... cating adapter wheels:
The Sunnen P-310 checks all types of The VRC-500 can accommodate stem
guides for size and roundness. FAST! Part No. Description
diameters from .25 to .75 in. (6-19 mm); VS-1116A .385 in. (9,8 mm) diameter
Set Includes: head diameters from .625 to 4.5 in. (16- Sioux Pilots
114 mm); and stem lengths up to 9.0 in.
long (76 mm). The indicator reads in ten- VS-1118A .375 in. (9,5 mm) diameter
P-300 Gage [Dial calibrated in .0002 in. thousands (.0001 of an inch) increments. K.O. Lee, Neway, Black and
(0,005 mm) increments] Decker Pilots
VRC-500M Metric Checker
P-312 Probe (.3125 in.) Components of the VRC-500M are the For metric applications, order
P-344 Probe (.3437 in.) same as VRC-500, except the indicator is VS-1015M.
P-350 Indicator only replaced with a metric indicator calibrated
in 0,005 mm increments. The diameter
P-360 Wrench
range is .25 to .75 in. (6-19 mm). VSC-750 Rapid Valve
P-375 Probe (.375 in.) Seat Checker
P-610A Setting Fixture
P-650A Metal Storage Case (stores
Replacement Items for
items listed plus 5 more probes) P300 Gage
For metric applications, order P-310M.
P-350 Dial Indicator Assembly
Replacement and Additional G-5955A Bezel and Crystal (round lens style)
Probes G-59515A Bezel and Crystal (flat lens style)
Probe Size Diameter Range
Part No. Inches Inches Millimeters For use with the VSC-700 and SGM-
P-236 .2187 .224 to .264 5,69 to 6,70 VS-1005 Rapid Valve Seat 700 Single-Blade, 3-Angle Seat Cutter
Kit only. Compatible with the VS-875-44
P-250 .25 .238 to .278 6,05 to 7,06 Checker and VS-1000-44 indicator wheels.
P-281 .2812 .269 to .309 6,83 to 7,85
Indicator wheels ordered separately.
P-312* .3125 .300 to .340 7,62 to 8,64
For metric applications, order
P-344* .3437 .332 to .372 8,43 to 9,45 VSC-750M.
P-375* .375 .363 to .403 9,22 to 10,24
P-406 .4062 .394 to .434 10,01 to 11,02
P-438 .4375 .426 to .466 10,82 to 11,84
P-469 .4687 .457 to .497 11,61 to 12,62
P-500 .5 .488 to .528 12,40 to 13,41 Quickly and accurately checks out
*Included with P-310 Valve Guide Gage Set. roundness and runout of the critical
intersection between topping and seat
angles. Thousandth reading indicator
stays right side up for easy reading
as gage checks full 360° of the seat.
Works off valve pilot.
Set Includes:
VS-1010 Indicator Assembly with
indicating wheel for Sunnen Pilots
.389 in. (9,9 mm); plus these Indicator
Wheel Assemblies:
VS-1625-44 VS-1875-44 VS-2125-44
VS-1750-44 VS-2000-44 VS-2250-44
VS-1020A Indicator Assembly only
50 1-800-325-3670
AG-Series Precision Gage
For Pin Fitting and Rod Reconditioning
AG-300 Range: .375"-3.375" (9,5-85,7 mm) AG-400 Range: .720"-2.687" (18-68 mm)
Note: T
he AG-400 has fingers that are .600" longer than the AG-300
(For use with larger diameter pistons with shorter wrist pins)
Sunnen AG-Series Precision Gage Midget Point Set AG-140 and AG-140L
Helps Sell Rod Reconditioning Service (Must be ordered Range .375"-.750" (9,5-19 mm). For checking pin fits on small
separately-not included with honing machines.) bore engines. Fits AG-300 Gage without alterations. (See
chart below...be sure to check serial number of gage before
Dial reads directly in “tenths” (.0001").
ordering midget point sets.) Set includes all required parts
• Checks rod journal bore for distortion.
and metal storage box.
• Assures correct size—within .0001"!
• Anyone can use it. No “feel” required!
• Measures size instantly!
• Wear-compensated gage points assure permanent accuracy!
The only gage made
• Assures exact fits required by today’s high tech engines. for both clearance
No rod should be reconditioned or pins fit without precise gag- and press type
ing. The only way to know the size is to measure the hole. pin fits AND THE
JOURNAL END OF
•E xact pin size is transferred to the AG-300 Gage with a CON-RODS.
wear-compensated setting fixture.
• Rugged construction. All moving parts are enclosed in
housing. Never affected by vibration or shock.
• As shipped-Range .720"-2.687" (18-68 mm). Includes setting
fixture, calibrator rings, medium and large extension point Extra Large Point Set AG-340
sets, accessory case, mounting bracket and instructions. Range 2.625"-3.375" (67-86 mm). Ideal for checking bores in
Shipping Weight: approximately 25 lbs. (11,4 kg) large truck and tractor rods. Fits all AG-300 Gages.
Gage Point Sets Point Sets Part No. Fits Gages Serial Numbers Range
Each Midget Point Set includes all AG-140 Under 13,000
Midget Point Sets .375"-.750" (9,5-19 mm)
required parts & metal storage box. AG-140L 13,000 and UP
Standard Set AG-210* ALL GAGES .720"-1.530" (18-39 mm)
These sets consist of two Gage Medium Extension Sets ABOVE 4,000-Heavy-duty
AG-620* 1.500"-2.250" (38-57 mm)
Points and a centralizer point. type with Carbide Gage Balls
Order by part number listed at right. ABOVE 4,000-Heavy-duty
Large Extension Sets AG-630* 1.932"-2.687" (49-68 mm)
type with Carbide Gage Balls
Extra Large Extension Sets AG-340 ALL GAGES 2.625"-3.375" (67-86 mm)
This set includes the AG-620 and AG-630
Point Sets. It is complete with both small
and large calibration rings, adjustment Accessory and Point Set Kit AG-475L* 13,000 and UP 1.500"-2.687" (38-68 mm)
wrench. Includes metal storage box.
Replacement Parts For AG-300 Calibrating Rings for Quickly Setting AG-300 Gage to Connecting Rod Size
Part No. Description Part No. Description Part No. Size Part No. Size
AG-50A* Dial Indicator AG-438A* Replacement Gaging RG-2125 2.125" (53,9 mm) RG-2325 2.325" (59,0 mm)
AG-34* Crystal Balls (package of 10) RG-2225 2.225" (56,5 mm) RG-2374 2.374" (60,3 mm)
AG-26A* Face Plate for AG-210 Standard RG-2237 2.237" (56,8 mm) RG-2436 2.436" (61,9 mm)
AG-299A* Setting Fixture Point Set RG-2239 2.239" (56,9 mm) RG-2500 2.500" (63,5 mm)
(with wear pads) AG-456A* Small Calibration Ring RG-2250 2.250" (57,1 mm) RG-2591 2.591" (65,8 mm)
PG-7A* Plastic Cover AG-465A* Large Calibration Ring RG-2275 2.275" (57,8 mm)
AG-450A* Adjusting Wrench RG-2100 Complete Set of 11 ring gages listed above
*These parts included with AG-300.
*These parts included with AG-400.
Replacement Parts For AG-400
AG-50A* Dial Indicator AG-438A* Replacement Gaging
AG-34* Crystal Balls (package of 10)
AG-26A* Face Plate for AG-210 Standard
AG-410A* Setting Fixture Point Set
(with wear pads) AG-404* Small Calibration Ring
PG-7A* Plastic Cover AG-465A* Large Calibration Ring
AG-450A* Adjusting Wrench
www.sunnen.com 51
Dial/Digital Bore Gages
Gages and Accessories
GRM/GR-3000 Dial Bore Gage

Diameter Range: .054" – 12.0" 1 2 3 Max. Gaging Overall 4
1,37mm – 304,8 mm Diameter Range Depth Length
Probe Transfer Probe
GR-3000 assembly consists of a Gage in mm No. Pin No. in mm in mm Ext.
.00001" reading indicator, probe retrac-
tor and probe retainer bushing in a rein- GR/ .054 - .061 1,37 - 1,55 G-1055 G-2037 .43 11 6.6 167 KZ1X-
forced nylon insulating shroud. GRM- .059 - .075 1,50 - 1,90 G-1070 .63 16 6.9 174 3500
Order GRM-3000 for ,002 mm reading. 3000 .071 - .087 1,80 - 2,20 G-1080 G-2059 .63 16 6.9 174
Shipping Weight: 2 lbs. (1 kg) See
.081 - .096 2,05 - 2,45 G-1090 .63 16 6.9 174
Note
.089 - .108 2,25 - 2,75 G-1100 .82 21 7.1 179
.098 - .118 2,50 - 3,00 G-1110 .82 21 7.1 179
.108 - .128 2,75 - 3,25 G-1120 .82 21 7.1 179
.118 - .138 3,00 - 3,50 G-1130 G-2089 .82 21 7.1 179
.128 - .148 3,25 - 3,75 G-1140 .82 21 7.1 179
.138 - .157 3,50 - 4,00 G-1150 .82 21 7.1 179
.148 - .167 3,75 - 4,25 G-1160 .82 21 7.1 179
.165 - .189 4,20 - 4,80 G-1180 1.53 39 7.7 195
.185 - .209 4,70 - 5,30 G-1200 1.53 39 7.7 195
.205 - .228 5,20 - 5,80 G-1220 1.53 39 7.7 195
.224 - .248 5,70 - 6,30 G-1240 1.53 39 7.7 195
.244 - .268 6,20 - 6,80 G-1260 1.53 39 7.7 195
.264 - .287 6,70 - 7,30 G-1280 G-2264 1.53 39 7.7 195
.283 - .307 7,20 - 7,80 G-1300 1.53 39 7.7 195
.303 - .327 7,70 - 8,30 G-1320 1.53 39 7.7 195
.323 - .346 8,20 - 8,80 G-1340 1.53 39 7.7 195
.343 - .366 8,70 - 9,30 G-1360 1.53 39 7.7 195
.362 - .386 9,20 - 9,80 G-1380 1.53 39 7.7 195
.370 - .417 9,40 - 10,60 G-1400 1.81 46 7.7 195
.409 - .457 10,40 - 11,60 G-1440 1.81 46 7.7 195
G-2370
Order 1-4 for each diameter. .449 - .496 11,40 - 12,60 G-1480 1.81 46 7.7 195
.488 - .535 12,40 - 13,60 G-1520 1.81 46 7.7 195
1 Gage GR/GRM-3000
Probe Extension
2 Probe Available for probes .323" (8,2 mm) or larger. Probe extensions are 2.5" (63,5 mm)
long, and up to three can be assembled together. Part Number: KZ1X-3500.
Probe extension is not intended for use with the CF-540 setting adapter.
3 Transfer Pin
NOTE: It may be necessary to order one or more KZ1X-3500 Probe extensions
to reach the valve guides. The probe extensions may be larger in diameter
4 Probe Extension than the value guide, but will not interfere with the gaging probe.
Gage Probes and Transfer

Pins
Probes and pins must be ordered
separately. Diameter ranges, gaging
depths and part numbers are listed in
chart.
G-3005A Probe and Transfer Pin

Storage case
1-800-325-3670
Dial/Digital Bore Gages Setting Fixtures
CF-540 Size Setting Adapter Setting Fixtures Replacement Gage Nests For
Centers gage probes between parallel CF-502M (metric) CF-502M Metric & CF502:
reference surfaces on CF-502 Setting 1,37 mm-50,8 mm CF-502M CF-550A 12,6 mm-19,1 mm
Fixture. Serves as an “extra pair of CF-502 (inch) .054"-2.00" CF-560A 18,8 mm-30,2 mm
hands” to help in nulling the gage on CF-570A 30,0 mm-50,0 mm
both the horizontal and vertical axis. For use with 3000, 4000, 6000, and
Assures fast, accurate setup of the gage. 9000 Series Dial Bore Gages. CF-502 CF-550A .495"-.750"
CF-502M comes with0-51 mm CF-560A .740"-1.19"
Shipping Weight: CF-570A 1.18"-2.00"
2 lbs. (1 kg) micrometer head marked in ,002
mm increments with precision CF-137 Micrometer Adjusting Wrench
lapped carbide anvils. Includes a CF-138 Spindle Lock Knob
ring gage checking standard and
three interchangeable nests. (Use of CF-544A Magnifier
CF-502M/CF-502 with 3000 series CF-576A Calibration Ring
gage requires the purchase of CF-540
Size Setting Adapter.) Setting Master
has a rugged, stress-relieved cast-
iron base and may be used without Right Angle Attachment*
removing it from its protective case.
CF-502 is equipped with a 0"-2" Available for special conditions where it
micrometer head marked in .0001" is difficult to read the gage or the total
increments. gage height causes a problem.
Part Number: KZ1X-90.
CF-502M/CF-502 Shipping Weight:
Shown with CF-502 10 lbs. (4,5 kg) *Standard CF-502 Setting Fixture nest does not
Setting Fixture. work with these accessories. Alternative methods
of setting size must be used.
Available 4 weeks after receipt of order.
www.sunnen.com 53
GA/GAM-4000 Series Gages GR/GRM-6000 Series Gages for Lifters

.495" – .750" (12,6 mm – 19,0 mm) .740" – 1.190" (18,8 mm – 30,2 mm)
Non-retractable gage with .0001"or (,002 mm met- Retractable gage with .0001" or (,002 mm) metric
ric) reading indicator. Capable of measuring to reading indicator. Capable of measuring to within .270"
within .200" (5,0 mm) of the bottom of a blind hole. (6,8 mm) of the bottom of a blind hole. Indicators
Indicators reading in ,010 mm or .0005" are available reading in .0005" or (,010 mm) are available on
on special order. special order.
Part Max. Gaging Overall Shipping Part Max. Gaging Overall Shipping
Number Depth Length Weight Number Depth Length Weight
Inches Metric in mm in mm lbs kg Inches Metric in mm in mm lbs kg

GA-4051 GAM-4051 2.5 62 7.3125 187 1.5 ,7 GA-6051 GAM-6051 3.5 88 9.1875 235 2 1
GA-4101 GAM-4101 5 125 9.8125 251 1.5 ,7 GA-6121 GAM-6121 6 150 11.6875 298 2 1
GA-4141 GAM-4141 7 175 11.8125 302 1.5 ,7 GA-6241 GAM-6241 12 300 17.6875 451 2 1
Replacement Parts For GA/GAM-4000 Series Gages: Replacement Parts For GR/GRM-6000 Series Gages
G-375MA Quick Setting Wrench (Metric reading)

G-275MA Quick Setting Wrench (Metric reading)
G-375A Quick Setting Wrench (Inch reading)
G-385A Indicating Ball Removal Tool
G-389A Indicating Finger Clamp
G-289A Indicating Finger Clamp
PBR-506A Indicating Ball (.0937" Diameter Carbide)
PBR-505A Indicating Ball (.0625" Diameter Carbide)
G-327A Centralizer Points (Package of 2)
G-222A Centralizer Points (Package of 2)
G-361MA #1 Point Assembly (metric)
18,8 mm-22,6 mm diameter
G-361A #1 Point Assembly (inch
G-261A #1 Point Assembly (inch)
.740"-.890" diameter
.890"-1.04" diameter
1.04"-1.19" diameter
G-349A Nuts for Point Assembly
G-249A Nuts for Point Assembly
(Package of 3)
(Package of 3)
G-349MA Metric Nuts for Point Assembly
G-249MA Metric Nuts for Point Assembly
(Package of 3)
(Package of 3)
Special Length Dial Bore Gages are available on a
Special Length Dial
special order basis. GR/GRM-6000 Indicator cannot be
Bore Gages are avail-
able on a special order CF-502 Setting peaked at lengths longer than 12" (305 mm) therefore
Fixture gage accuracy is compromised.
basis. GA/GAM-4000
Indicator cannot be Metric version CF-502M has a
To order special length dial bore gages, specify as
peaked at lengths lon- 0 to 51 mm
Micrometer head marked
follows: GR/GRM-6_1X. The _ is the desired gaging
ger than 7" (175 mm)
in ,002 mm increments. length multiplied by 2 (in inches). Available 4 weeks
therefore gage accuracy
Supplied in a sturdy, nested after receipt of order.
is compromised.
box.
Gage Diameter Range
To order special length CF-502 for .054" to 2.000" Point No. in mm
dial bore gages, specify diameters is equipped with a
large micrometer head with 1 2.000-2.375 50-60
as follows: GA/GAM-
range of 0" to 2" marked in 2 2.375-2.750 60-70
4_1X. The _ is the 2.750-3.125 70-79
.0001" increments. 3
desired gaging length 4 3.125-3.500 79-89
multiplied by 2 (in 5 3.500-3.875 89-98
inches). 6 3.875-4.250 98-108
Available 4 weeks after 7+2 4.250-4.625 108-117
receipt of order. Shown with 7+3 4.625-5.000 117-127
GR-6121 Gage. 7+4 5.000-5.375 127-137
7+5 5.375-5.750 137-146
7+6 5.750-6.000 146-150
54 1-800-325-3670
GR/GRM-9000 Series Gages GA/GAM-2000 Series Gages

Diameter Range: 1.18" – 2.0" 30,0 mm – 50,8 mm) (Non-Retractable)
Retractable gage with .0001"or (,002 mm metric) GR/GRM-2000 Series Gages
reading indicator. Capable of measuring to within .335" (8,5 (Retractable)
mm) of the bottom of a blind hole. Indicators reading in Diameter Range: 2.0" – 6.0" (50 mm – 150 mm)
.0005", or 010 mm are available on special order. Non-retractable gage with .0001" or (,002 mm) metric
reading indicator. Capable of measuring to within .500"
Part Max. Gaging Overall Shipping (13 mm) of the bottom of a blind hole. Indicators read-
Number Depth Length Weight ing in .0005" or (,010 mm) are available on special order.
Inches Metric in mm in mm lbs kg
Part Max. Gaging Overall Shipping
GR-9071 GRM-9071 3.5 88 9.25 237 4 1,8 Number Depth Length Weight
GR-9121 GRM-9121 6 150 11.75 300 4 1,8
GR-9241 GRM-9241 12 300 17.75 452 4 1,8 Inches Metric in mm in mm lbs kg
GA-2031 GAM-2031 3 75 8 203 6 2,7
Replacement Parts For GR/GRM-9000 Series Gages: GA-2061 GAM-2061 6 150 11 280 6 2,7
GA-2121 GAM-2121 12 300 17 432 6 2,7
G-475MA Quick Setting Wrench (Metric reading) GA-2241* GAM-2241* 24 600 29 737 6 2,7
*Available 2 weeks after receipt of order.
G-489A Indicating Finger Clamp Extension sleeves are available for converting GAM/GA-2000
PBR-503A Indicating Ball (.125" Diameter Carbide) Series Gages to different lengths. The following extension
G-427A Centralizer Points (Package of 2) sleeves are available:
G-461MA #1 Point Assembly (metric) GA-203 Accessory Extension Sleeves 3" (75 mm)
30,0 mm-35,2 mm diameter GA-206 Accessory Extension Sleeves 6" (150 mm)
G-461A #1 Point Assembly (inch) GA-212 Accessory Extension Sleeves 12" (300 mm)
1.18"-1.385" diameter GA-224 Accessory Extension Sleeves 24" (600 mm)
G-462MA #2 Point Assembly (metric) Retractable gage with .0001" or (,002 mm) metric reading
35,2 mm-40,4 mm diameter indicator. Capable of measuring to within .500" (13 mm) of the
G-462A #2 Point Assembly (inch) bottom of a blind hole. Indicators reading in .0005" or (,010 mm)
1.385" 1.59" diameter available on special order.
G-463MA #3 Point Assembly (metric) *Furnished with metal case for accessories only.
G-463A #3 Point Assembly (inch) Part Max. Gaging Overall Shipping
1.59"-1.795" diameter Number Depth Length Weight
45,6 mm-50,8 mm diameter Inches Metric in mm in mm lbs kg
1.795"-2.0" diameter GR-2061 GRM-2061 6 150 11 280 6 2,7
G-449A Nuts for Point Assembly (inch) GR-2121 GRM-2121 12 300 17 432 6 2,7
(Package of 4) GR-2241 GRM-2241 24 600 29 737 6 2,7
G-449MA Nuts for Point Assembly (metric)
(Package of 4)
Replacement Parts For 2000 Series Gages
Special Length Dial Bore Gages are available on a special PBR-503A Indicating Ball (.125" Diameter Carbide)
order basis. GR/GRM-9000 Indicator cannot be peaked at G-522A Centralizer Points (Package of 2)
lengths longer than 25" (635 mm) therefore gage accuracy is G-532A Nuts (Package of 6)
compromised. G-532MA Nuts (metric) (Package of 6)
To order special length dial bore gages, specify as follows:
G-610A #1 Point Assembly 2.0"-2.375" (50,8 mm-60,3 mm)
GR/GRM-9_1X. The _ is the desired gaging length multiplied G-611A #2 Point Assembly 2.375"-2.750" (60,3 mm-69,8 mm)
by 2 (in inches). G-612A #3 Point Assembly 2.750"-3.125" (69,8 mm-79,4 mm)
Available 4 weeks after receipt of order. G-613A #4 Point Assembly 3.125"-3.500" (79,4 mm-88,9 mm)
Note: Sunnen 2000 Series Dial Bore Gages can be extended to12" 304,8 G-614A #5 Point Assembly 3.500"-3.750" (88,9 mm-98,4 mm)
mm by adding oversize centralizer points and additional gage point G-615A #6 Point Assembly 3.750"-4.250" (95,3 mm-107,9 mm)
extensions. G-632A #7 Point Extension
For gaging diameters in the range of 6"-12" (152,4-304,8 mm) order: G-634A #8 Point Extension
G-822A Gage Extension Kit. Consists of: Two Oversize Centralizer Points, G-645A Gage Point Assembly Ball Removal Tool
G-632A #7 Gage Point Extension, G-634A #8 Gage Point Extension. G-638A Gage Point Assembly Wrench
2000 Series Gages assembled with G-822A Gage extension set cannot be Special Length Dial Bore Gages are available on a special
used with CF-1126 setting fixture when set for diameters above 8" (203,2 order basis. 2000 Series Indicators cannot be peaked at
mm). Alternative methods of setting gage must be used.
lengths longer than 65" (1650 mm) therefore gage accuracy
G-822C Centralizer Point Only. is compromised. To order special length dial bore gages,
specify as follows: G_-2_1X. The second _ is the desired
gaging length multiplied by 2 (in inches). Available 4 weeks
after receipt of order.
www.sunnen.com 55
Setting Fixtures E Series Electronic Dial

CF-1126 (inch) CF-1126M (metric) Bore Gages Features
Diameter Range: 2.0" – 8.0" •1 6 Models + Special Lengths. All 3000,
(51 mm – 203 mm) 4000, 6000, 2000 Series Available -
For use with 2000 Series Dial Bore Add “E” Suffix on Part Number
Gages. Makes gage setting fast and • Metric/Inch Conversion .0001" or
easy. Micrometer adjustment allows (,001 mm) Divisions
“dialing in” sizes. A precision tool, • Display Swivels 330° for any Gaging
shipped with convenient storage Position
case. • SPC Capability
• Preset, zero set, +/- direction and
Shipping Weight: 9,5 kg Go/No Go functions.
(21 lbs.)
• Communicates with Computers.
Eliminates microm- • Large, easy-to-read LCD.
eters and ring gages. • GO/±NG judgment can be performed by setting upper and
Eliminates errors and lower tolerance limits. The judgment result (GO/±NG) can
“feel” in setting gages. Sets 2000 Series gages in seconds. be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/
Includes .0001" (,002 mm) micrometer head with precision down movement can be toggled.
lapped carbide anvils. Comes with a ring gage checking • Internal calculations using the simple formula of [F(x)=Ax)]
standard and precision setting standards in 1" (25,4 mm) are available
increments. Setting Master has a rugged, stress-relieved, • Employing the ABSOLUTE linear encoder, the ID-C always
cast iron base. May be used without removing from its pro- displays the spindle “Absolute Position” from the origin at
tective case. power-on. Also unlimited response speed eliminates over-
Setting Fixtures are shipped complete with setting standards speed errors.
to cover 2"-6" (50 mm-152,4 mm) range. A setting standard is • The ID-C indicator face can be rotated 330° to an appropri-
not required to measure in the 7"-8" (178 mm-203 mm) range. ate angle for easy reading.
When measuring in the 6"-7" (152 mm-178 mm) range order: • With SPC data output. Can be connected to a computer to
input measurements directly into SPC software/spreadsheet
CF-260A 6"-7" (inch) CF-360A 152-178 mm (metric) • Technical Data
CF-1126 Replacement Setting Standards: Accuracy: 0.00012in
Resolution: 00005in 0.001mm (switchable)
CF-220A* 2"-3" CF-240A* 4"-5"
Display: LCD
CF-230A* 3"-4" CF-250A* 5"-6"
CF-260A 6"-7" Length standard: ABSOLUTE electrostatic capacitance
*Included with CF-1126 type linear encoder
Max. Response speed: Unlimited
CF-1126M Replacement Setting Standards:
Battery life: Approx. 5,000 hours under normal use
CF-320A* 50-75 mm CF-340A* 100-125 mm Dust/Water protection level: IP42 or IP53 (dust-proof type)
CF-330A* 75-100 mm CF-350A* 125-150 mm • Functions
CF-360A 152-178 mm
Origin-set/Preset, Zeroset, GO/±NG judgment, Counting
*Included with CF-1126M
direction switching, Power ON/OFF,
CF-544A Magnifier CF-215A Calibrating Ring Data output,inch/mm conversion
CF-137A Spanner Wrench CF-215MA Calibrating Ring Alarm: Low voltage, Counting value composition error,
(metric)
Over-flow error, Tolerance limit setting error
Internal calculations using the simple formula of
Replacement Indicators for Sunnen Dial Bore Gages [F(x)=Ax)] are available
Part No. Qty. Description
Accessories/Repair Parts for E Series
– – – Ref. Dial Indicator Assembly includes LU2X1 Cable (2 Meter Length) Connect to USB Port
G595A 1 Indicator (.0005 in. Reading)
G799A Replacement Indicator and Bushing
G595MA 1 Indicator (0,01 mm Reading)
G795A 1 Indicator (.0001 in. Reading)
G795MA 1 Indicator (0,002 mm Reading)
G596A 1 Screw
G597A 1 Nut
G59515A 1 Bezel and Crystal Assembly - Flat Style Lens
G59513A 1 Bezel Clamp and Screw - Flat Style Lens
G595-5A 1 Bezel and Crystal Assembly - Round Style Lens
G595-3A 1 Bezel Clamp and Screw - Round Style Lens
G795-1 1 Bezel and Crystal Assembly - Flat Style Lens with
Blue Bezel
G795-2 1 Bezel Clamp and Screw - Flat Style Lens with
Blue Bezel
56 1-800-325-3670
GR-6241 and GR-9241 with GA-2125 and GR-2125

Retractable Centralizers For cylinders, sleeves, large con rods...
For lifter bores, cam bearing bores, many other gaging jobs.
hydraulic valve bodies and cylinders. Shipping Weight: 7 lbs. (3,2 kg)
Shipping Weight: 7 lbs. (3,2 kg) Diameter range: 2" to 6"
GR-6245 diameter range: .740" to (50,8 to 152,4 mm).
1.190" (18,8 mm to 30,2 mm) Gages holes up to 12" (304 mm) long.
GR-9245 diameter range: 1.180" to The GA-2125 is self-aligning in the
2.0" (30,0 mm to 50,8 mm) bore, requires no centering. Lets you
explore the entire cylinder from top to
The GR-6245 and GR-9245 dial bore bottom...in seconds.
gages parallel the GR-2125 and GR-2245
in function. They are ideally suited for The retractable self-centering mecha-
many small bore applications–fast, easy, nism in the gaging head of the
accurate. GR-2125 makes it easy to gage inter-
rupted bores typical of 2-cycle motor-
For metric applications, order: cycle and marine engine applications
GRM-6245-range: 18,8 to 30,2 mm. without “hanging up”. The retraction
GRM-9245-range: 30,0 to 50,8 mm. features allows precise exploration of
Dial is marked in ,01 mm increments. a high performance cylinder without
leaving telltale gaging marks.
• Gages are self-centering.
Indicators are • Adjustable dial for easier reading.
available for gages.
• Dial is marked in .0005" increments.
G795A .0001" (,003 mm)
G595A .0005" (,0127 mm) • Carbide gaging points...for long life.
• Insulated grip eliminates “drift”.
• Furnished in molded case with extension points and wrenches.
For metric models, order GAM-2125 or GRM-2125.
GR-2245 Gage with Retractable Range: 50 to 203 mm. Dial marked in ,01 mm increments.
Centralizers NOTE: Special length gages are available on a special order
For main bearing saddle bores and cam shaft basis. Write for product bulletin #P-4206 or call Customer
Service, Sunnen Products Co. for information.
bearing bores.
Diameter range: 2" to 6" (50 to 152 mm). Gages
holes up to 24" (60,9 cm) long. Note: Sunnen 2000 Series Dial Bore Gages can be extended
This gage incorporates identical features and to 12" (304,8 mm) by adding oversize centralizer points and
benefits of the GR-2125 with the additional reach additional gage point extensions.
length of 24" (60,9 cm).
For metric applications, order GRM-2245. For gaging diameters in the range of 6"-12" (152,4 mm-304,8
Diameter range: 50 to 150 mm. mm) order: G-822A Gage Extension Kit. Consists of:
Dial is marked in ,01 mm increments. Two Oversize Centralizer Points, G-632A #7 Gage Point
Extension, G-634A #8 Gage Point Extension.
The GR-2245 is furnished with a
storage case for accessories only. 2000 Series Gages assembled with G-822A Gage extension
set cannot be used with CF-1126 Setting Fixture when set
for diameters above 8" (203,2 mm). Alternative methods
of setting gage must be used.
Setting fixtures for Dial Bore Gages, see next page.
www.sunnen.com 57
Dial/Digital Bore Gage Setting Fixtures
Sunnen’s unique setting fixtures allow fast, easy setting of CF-1126 Setting Fixture
Sunnen dial bore gages with no need for separate microm- (Gage not included)
eters and ring gages. Sizes are simply “dialed in” with the
micrometer adjustment, which eliminates errors due to
“feel” in setting gages.
Two models combine to cover a continuous range of .054"
to 8" in .0001" increments (1,37 mm to 203 mm in ,002 mm
increments). Both models feature a heavy stress-relieved
cast iron base, lapped carbide micrometer anvils, and built-
in magnifier for fast, accurate setup.
CF-502 Setting Fixture

(Gage not included)
For use with GR-6245 and GR-9245
dial bore gages.
For .054" to 2.000" (1,4 to 50,8 mm)
diameters—
Model CF-502 is equipped with a large
micrometer head with range of 0" to 2"
marked in .0001" increments.
For use with GA-2125, GR-2125 and GR-2245 Dial Bore Gages.
Setting Fixture comes with CF-576A For 2" to 8" (51 to 203 mm) diameters.
.750" (19,05 mm) master calibrating ring.
The CF-1126 incorporates a tenth-reading micrometer head
with precision carbide anvil. Accurate within .0001" (0,0025
CF-502M Metric Setting Fixture has a mm). Ring gage checking standard included. Precision set-
0 to 51 mm micrometer head marked ting standards in 1" (25,4 mm) increments. Setting Master has
in ,002 mm increments. Supplied in a rugged stress-relieved, cast iron base. May be used without
sturdy, nested box. removing from protective case.
The setting fixture itself covers the 7" to 8" (178 to 203 mm)
range. In addition, the fixture is supplied with standards to
cover the 2" to 6" (50 to 152,4 mm) range. Order additional
setting standards to give complete 2" to 8" range as follows:
CF-130A (Not shown)

Replacement Micrometer Anvil
Gage Point Selection Table

CF-125A (Not shown) Gage Diameter Range
Nest for CF-1126 Point No. in mm
1 2.000-2.375 50-60
2 2.375-2.750 60-70
CF-140 Adapter Kit (Not shown) 3 2.750-3.125 70-79
This adapter kit is required for the early model CF-1000 4 3.125-3.500 79-89
Setting Fixture so it can be used with the Sunnen CK-3280 5 3.500-3.875 89-98
as well as the current GA-2125 and GR-2245 Gages. 6 3.875-4.250 98-108
7+2 4.250-4.625 108-117
7+3 4.625-5.000 117-127
7+4 5.000-5.375 127-137
CF-210A Setting Standard 7+5 5.375-5.750 137-146
7+6 5.750-6.000 146-150
Setting standard for CF-1000 setting fixture.
Note: F
or electronic gages add “E” to the end of the part
number.
58 1-800-325-3670
PG Bore Gaging System
PG-700E Small Bore Precision Gage Gaging Fingers for PG-700 or PG-710
Diameter Range: .090"-.379" (2,29 mm-9,63 mm)* Precision Gage
Direct reading scale with .005" (,13 mm) range divided To order individual finger pairs,
into increments of .00005" (,001 mm). consult the table below for size
Order PG-700EM for metric applications. ranges and part numbers.
Weight: 20.5 lbs. (9,3 kg) Each pair of gaging fingers is
Dimensions stamped with its size range and
(without fingers): comes nested in an impact-resistant
10.5" H x 7.75" W x 6.5" box. Available for sale only.
D (267 mm x 197 mm x Individual Gaging Finger Shipping Weight: .5 lb. (,2 kg)
165mm) Diameter Range Gaging Depth* Accessory
inches mm inches mm Fingers
*Covered with complete
set of gaging fingers. .090-.099 2,29-2,51 .281 7,14 PG-1090
Individual finger sets can .099-.109 2,51-2,77 .281 7,14 PG-1099
be ordered for specific
sizes. Order individual .109-.120 2,77-3,05 .281 7,14 PG-1109
finger sets from the .120-.132 3,05-3,35 .500 12,70 PG-1120
complete list at right.
.132-.145 3,35-3,68 .500 12,70 PG-1132
.145-.159 3,68-4,04 .625 15,87 PG-1145
.159-.174 4,04-4,42 .625 15,87 PG-1159
.174-.190 4,42-4,83 .750 19,05 PG-1174
.190-.207 4,83-5,26 .750 19,05 PG-1190
PG-700
.207-.225 5,26-5,72 .875 22,22 PG-1207
PG-2110 Snap in Plate .225-.244 5,72-6,20 .875 22,22 PG-1225
.244-.264 6,20-6,71 1.000 25,40 PG-1244
.264-.285 6,71-7,24 1.000 25,40 PG-1264
PG-710E Small Bore Precision Gage .285-.307 7,24-7,80 1.250 31,75 PG-1285
Identical to PG-700 except direct reading scale is .010" .307-.330 7,80-8,38 1.250 31,75 PG-1307
(,24 mm) wide and divided into increments of .0001"
(,0025 mm). Order PG-710EM for metric applications. .330-.354 8,38-9,00 1.500 38,10 PG-1330
.354-.379 9,00-9,63 1.500 38,10 PG-1354
Metal Storage Cabinet PG-1418
COMPLETE SET of all Gaging Finger Pairs,
including PG-1418 Metal Storage Cabinet. PG-1401
Weight: 20 lbs. (9 kg)
* If bore can be measured from both ends, bore length can be
double the gaging depth shown.
Blind Hole Gaging Fingers for

PG-700/PG-710 Gages
Special Blind Hole Gaging Fingers are available on special
order basis. These fingers are non-adjustable and can only
be used for a specific diameter size. These altered blind hole
fingers can measure to within .040" (1,02 mm) of the bottom
of the blind end of the bore. Recommend customer use a ring
gage to set size on the gage.
GAGE LEASING PROGRAM How to order blind hole gaging fingers:
Sunnen PG-700, PG-800 Series Gages, Setting
Fixtures, and PG-250 Extension Fingers are also PG-_ _ _ _ - _ _ _ _ - HMOX The first _ _ _ _ is the four-
available on a unique lease plan. Leasing the Sunnen digit number of the standard gaging fingers for the diameter
bore gaging system includes maintenance and needed to be measured. The second _ _ _ _ is the finished
updating by Sunnen. Contact KS & C Industries diameter of the bore to be measured, either in English or
1-800-247-7098 for complete leasing information. Metric units.
Note: T
his program is not available outside of the Examples: .2092" diameter. Order: PG-1202-2092-HMOX
United States. 2,89 mm diameter. Order: PG-1109-2,890-HMOX
Available 4 weeks after receipt of order.
www.sunnen.com 59
PG-800 Precision Gage PG-810E Precision Bore Gage

Diameter Range: .090"-.4.310" Identical to PG-800 except direct reading scale is .010"
(2,29 mm-109,47 mm) (,24 mm) wide and divided into increments of .0001"
The Sunnen “PG” Bore Gaging (,0025 mm). Order PG-810EM for metric applications.
System is a unique mechanical
gaging system that makes I.D.
Gaging simple, reliable, and PG-250E Extension Finger Set
economical. Eliminates buying Used with the PG-800 and
and maintaining costly master PG-810 Precision Bore Gages.
rings and air gage probes. Both Extends the PG-800/PG-810
gage and setting fixture are built measuring range from 1.500"
for everyday use making them (38,1 mm) to over 2.900" (74,3
ideal for “in-process” inspec- mm) diameter. Consists of two
tion. Available in 00005" or .0001" pairs of carbide extension points
(,001 mm or ,0025 mm) reading PG-800 which mount onto the fingers of
scales. the PG-800/PG-810. Mounting
screws are permanently
PG-800E Precision Bore Gage attached to extension points to avoid their loss. FOR SALE
OR LEASE.
Diameter Range: .370" – 1.500" (9,4 mm – 38,1 mm)
Direct reading scale with .005" (,13 mm) range divided
into increments of .00005" (,001 mm). PG-400E Setting Fixture
Overall size range is divided into
Diameter Range: 090" – 1.500" (2,29 mm – 38,3 mm)
two subranges .370"-.750" (9,4
mm-19,05 mm) and .750"-1.500" This Setting
(19,05 mm-38,1 mm). Replaceable Fixture is used
carbide gage points which can to set the
be rotated for long life. Size PGE-3000,
range can be increased to 2.9" PG-800,
(74,3 mm) by ordering PG-250 PG-810, PG-700
Extension Finger Set. and PG-710
Precision
Order PG-800EM for metric appli- Bore Gages.
cations. Dimensions: 10.5" H x Dimensional
7.75" W x 8.375" D (267 x 197 x accuracy is guaranteed to be within ± .000025" (,0006
213 mm) Gaging Depth: Small mm) of nominal reading over the entire range of the
Side - .968" (24,6 mm) Large Side - instrument. Comes in a carrying case with a master cali-
PG-800E
1.656" (42,06 mm) With PG-250 - 1.625" brating ring traceable to the Bureau of Standards.
(41,27 mm) Weight: 20.25 lbs. (9,2 kg) Order PG-400EM for metric applications.
Weight: 6.75 lbs. (3 kg) (with carrying case and accessories)
PG-810-Z08X Precision Bore Gage

Diameter Range: 3.0" – 4.5" (76,2 mm – 114,3 mm)
Available for purchase only. PG-810-Z08X
PG-810-Z08X is similar to
the PG-810 Precision Bore
Gage. Diameters 3.0"- PG-500-U100X
3.750" (76,2 mm-95,25
mm) are measured on one
side. Diameters 3.750"-
4.5" (95,25 mm-114,3 mm)
are measured on the
opposite side. Dimensions:
10.5" H x 7.75" W x 8 .75" D (267 x 197 x 222 mm)
Order PG-810M-Z08X for metric applications.
Weight: 21 lbs. (9,54 kg)
60 1-800-325-3670
PG-500-U100X PG-845 Tilting Gage Stand

Setting Fixture for PG-810-Z08X A recommended accessory for
(Similar to PG-500 Setting Gage.) the PG-810-Z08X Precision Gage.
Diameter Range: 2.890" – 4.310" (73,40 mm – 109,47 mm) Lets the gage faceplate support
Used to set 3.0"-4.310" (76,2 mm-109,47 mm) diameter the majority of the part weight.
range on PG-810-Z08X. Used also with PGE-3000, PG-800/
PG-810. Attaches to MB-2370
Also used with PG-800 Series Gage with PG-250 Gage Mounting Bracket.
Extension Fingers and PG-2090-AM1X Auxiliary Face
Plate to set diameters 2.890"-3.0" (73,4 mm-76,2 mm). Weight: 4.5 lbs. (2,1 kg)
Setting size on PG-810-Z08X from 4.310"-4.5" (109,47
mm-114,3 mm) must be done utilizing ring gages or
gage blocks.
PG-2110 Clip-On Auxiliary Faceplate
Order PG-500M-U100X for metric applications. For PG-700/710 Precision Gage.
Shipping Weight: 17 lb. (7,7 kg)
Additional PG Gage Faceplates.
PG-810-Z08X and PG-500-U100X available from stock
(limited quantity available). PG-2090-AM1X available three PG-4 Auxiliary Faceplate for PG-700/PG-710.
weeks after receipt of order. A flat plate with ten holes designed to slip
over the gaging fingers of a PG-700/PG-710.
Reduces the opening size of the PG-2110
PG-2130 Flexible Hex Wrench PG-4
faceplate making it easier to measure thin
Use to dampen vibration when centralizing PG-400 on the walled parts. Hole sizes on PG-4 vary from
PG-700/710 Precision Gage. .109"-.343" (2,77 mm-8,71 mm).
PG-10A Auxiliary Faceplate set for PG-800/

PG-810 Precision Gage. Consists of one
PG-5 PG-5 and PG-6 Faceplate similar to PG-4.
PG-5 hole size .720" (18,3 mm), .820" (20,8
mm), and .920" (23,4 mm). PG-6 hole size
.380" (9,7 mm), .430" (10,9 mm), .480" (12,2
mm), .530" (13,5 mm), .580" (14,7 mm), .630"
(16,0 mm), and .680" (17,3 mm).
PG-6
www.sunnen.com 61
PG Bore Gaging Accessories Gage Mounting Brackets

Replacement Gage Points for PG-800 and PG-250 Recommended when any Sunnen Precision
Bore Gage is used on a Sunnen Honing
PG-712A Consists of Three Carbide Gaging and Machine. Mounting brackets reduce lost motion
Point Set Three Mounting Screws for .740"-1.500" and fatigue and reduce runoff of honing oil.
(18,8 mm-38,1 mm) diameter gaging fingers.
Available for either right or left side mounting. All models
Also used on non-centralizer gaging fingers
adjustable for easiest access to gage.
on PG-250 Extension Finger Set.
To order, specify from chart.
PG-714A Consists of Three Carbide Gaging and Three
Point Set Mounting Screws for .370"-.740" Model No. Description
(9,4-mm-18,8 mm) diameter gaging fingers.
MB-2370 For Left or Right Side of MBB-1650 or
PG-1007 Eccentric Centralizer with carbide ring used MBB-1660; Left Side of MBB-1670,
on both centralizer extension fingers of the MBB-1680, MBB-1690, MBB-1800,
PG-250 Extension Finger Set. MBC-1800, MBC-1801, MBC-1802,
MBC-1803, MBC-1804, MBC-1805.
PG-110A Gage Point Removal and Installation Weight: 12 lbs. (5,5 kg)
Tool .370"-.740" (9,4 mm-18,8 mm).
PG-90A Gage Point Removal and Installation EC-7170 For Right Side of EC-3500.
Tool .740"-1.500" (18,8 mm-38,1 mm).
PG-120A Tolerance Flag Adjusting Wrench. PG-25 Magnifying Glass

With spring clip. Made of 2.5x ground
optical glass with a spring clip for
Blind Hole Gaging Points for PG-800 and PG-250
mounting on PG-700 or PG-800 precision
gage.
PG-702A Consists of Three Points and Screws .740"-
Blind Hole 1.500" (18,8 mm-38,1 mm). Also used on
Point Set non-centralizer gaging fingers on PG-250
Extension Finger Set.
PG-704A Consists of Three Points and Screws 9,4 mm-

Blind Hole .370”-.740” (18,8 mm) diameter gaging
Point Set fingers.
PG-LR6X For PG-250 Extension Finger Set

Blind Hole 1.5”-2.9” (38,1 mm-74,3 mm)
Centralizer
Note: B
lind hole point sets measure to within .010” (0,25
mm) of the bottom of the blind hole.
PG-LR6X available four weeks after receipt of order.
62 1-800-325-3670
Notes
Place your orders online

@
www.sunnen.com
63 1-800-325-3670
a legac y of exce lle nce si nce 1924.
WORLDWIDE
Our global manufacturing, Sunnen AG Sunnen Do Brasil LTDA.
distribution, and sales and Ennetaach – Switzerland São Paulo – Brasil
service network allows us Phone +41 71 649 33 33 Phone +55 11 4177-3824
to deliver quality Sunnen Fax +41 71 649 33 34 Fax +55 11 4362-3083
Email sales@sunnen.eu Email sunnen@sunnen.com.br
solutions worldwide.
www.sunnen.eu www.sunnen.com.br
And our state-of-the-art
Sunnen Italia S.r.l. Sunnen Polska Sp. z o.o.
Technical Services Centers
Arese – Italy Warszawa – Poland
allow our technical experts Phone +39 02 383 417 1 Phone +48 22 814 34 29
to develop innovative solutions Fax +39 02 383 417 50 Fax +48 22 814 34 28
to customer application Email sunnen@sunnenitalia.com Email sunnen@sunnen.pl
challenges. The Centers also www.sunnenitalia.com www.sunnen.pl
provide answers for customer
questions and training Sunnen SAS Sunnen RUS LLC
for Sunnen representatives Saclay – France Moscow – Russia
around the world. Phone +33 169 30 00 00 Phone +7 495 258 43 43
Fax +33 169 30 11 11 Fax +7 495 258 91 75
Email info@sunnen.fr Email sunnen@sunnen-russia.ru
www.sunnen.fr www.sunnen.ru
Sunnen Products Company Sunnen Benelux BVBA Sunnen s.r.o.

World Headquarters Kontich – Belgium Strakonice – Czech Republic
St. Louis, MO – USA Phone +32 38 80 2800 Phone +420 383 376 317
Phone 1.314.781.2100 Fax +32 38 44 3901 Fax +420 383 376 316
Fax 1.314.781.2268 Email info@sunnen.be Email sunnen@sunnen.cz
Toll Free 1.800.325.3670 www.sunnen.be www.sunnen.cz
Email sunnen@sunnen.com
www.sunnen.com Sunnen Products Ltd. Shanghai Sunnen
Hempstead Herts – United Kingdom Mechanical Co. Ltd.
Phone +44 1442 39 39 39 Shanghai – China
Fax +44 1442 39 12 12 Phone +86 21 5813 3990
Email hemel@sunnen.co.uk Fax +86 21 5813 2299
www.sunnen.co.uk Email shsunnen@sunnensh.com
www.sunnensh.com
Sunnen reserves the right to change or revise specifications

and product design in connection with any feature of our
products contained herein. Such changes do not entitle the
buyer to corresponding changes, improvements, additions,
or replacements for equipment, supplies or accessories
previously sold. Information contained herein is considered
to be accurate based on available information at the time
of printing. Should any discrepancy of information arise,
Sunnen recommends that user verify the discrepancy
with Sunnen before proceeding.
©2013 Sunnen Products Co. Printed in USA

A-7600 11/13-DA-15M

Engine Honing Equipment Catalog PDF

Uploaded by

Copyright:

Available Formats

Engine Honing Equipment Catalog PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Engine Honing Equipment Catalog PDF

Uploaded by

Copyright:

Available Formats

ABOVE AND BEYOND HONING

Engine Honing Tooling

WWW. SUNNEN .COM A-7600

Built and Backed

If You Have Questions or Need

For Nearly 90 Years Sunnen Has Been the Leader in Honing.

Rod Reconditioning Cylinder Bore Reconditioning

OEM/Production Cylinder Honing Line Honing

Sunnen Leads the Table of Contents

Place your orders online @

Selection of External Hone Tooling

3 Stone for External Hones

• Produces straight, round holes

P-190 Valve Guide Hone Set Ordering Information

3 Stone AN-1075 Speed Control Unit

Nominal Range Range Stone

.1875 .185-.190 4,7 - 4,8 BL6-185CS S-185 — L6-J67 Order both:

Range Old New Old New

*Requires the use of LN570A Concentric sleeve.

Honing Units Replacement Parts

Replacement Parts 2 Stone Selection Chart

Adapter Mandrel Stone Truing

4.750" (120,6 mm)

2 3 (12 per Pkg.)

Mandrel does not wear…shoes

PHT Plateau Honing Tool For Blind Hole Work…

3GP20 Series Tooling 3GP28 Series Tooling

Tension Block Retainer Block Tension Block Retainer Block

YY24-A Adaptor YY24-W Wedge Stone

.748-.758 19,0-19,35 YY24-748M ST-750 YY24-A YY24-J65 YY24-W

Type RYY and SYY: Notes:

Range: .370"-.713" (9,4-18,1 mm)

Stone Guide Shoes

For Complete Honing Units

Range Old Ship. Wt. Adapter

Bushing Expander Order

Caution: Do not use these SL-15 Roughing Cutter (Optional)

Used with the ALR series expander mandrels.

Shipping Weight: Replacement Parts for AL-12

LBN-1A All-Steel Honing Unit Set

Rings Ring Sets

Manual Stroke Rod Fixture Kit

MBB-810 Spindle Drive Belt

Adapts certain mandrels to machine The KKN-735A is used in conjunction

Chamfers journal end of con-rods.

LBN-700 Stone Dresser AN-600 Honing Head

Stone Chart for SL and UL Type Mandrels

Ring Screw Wedge & Sleeve Bushing

Driver Cage Wedge Sleeve Pilot

CRT68-2130-D5C 2.120-2.140 CRT68-C CRT68-2130S-D5CA CRT68-2130-P PHSM-601 CRC-2120

SRT Stone Selections AFX Ring and Finger

Y32 Keyway Honing Units

Guide Shoes (2 Required)

Order 1-4 For Complete Y32 Keyway Honing Units

25,20-26,97 .992-1.062 Y32-1000PB S-994 C-1000 PB-B PB-H

Y32 Mandrel Replacement Parts 4 Stone Selection Chart

LN-1627A Shoe Clamp Set

LN-1575A Tension Block

Mineral Base Honing Oil SHO-965 Honing Oil SCC-900

GGN-112A Stone release lever with screws GGN-112A

Note: See chart at right for Stone Sets.