Legend Guitar

10”

LEGEND 1028K
The Eminence Legend 1028K
guitar speaker is a classic
stage fixture. Vintage American
tone with moderate, but tight,
percussive lows and extended
highs. Hard-working under the
bright lights.

Specification MOUNTING INFORMATION Materials of Construction

Nominal Basket Diameter 10.0”, 254 mm Enclosure Type Copper voice coil
Nominal Impedance* 8Ω Closed Back Acceptable Polyimide former
Power Rating** 35 W Open Back Acceptable Alnico magnet
Resonance (Fs) 95 Hz Overall Diameter 10.11’’, 256.8 mm Non-vented core
Usable Frequency Range 100 Hz – 5.0 kHz Baffle Hole Diameter 9.13’’, 231.9 mm Pressed steel basket
Sensitivity*** 97.4 dB Depth 4.80”, 121.9 mm Paper cone
DC Resistance (Re) 5.80 Ω Front Sealing Gasket Yes Paper cone edge
Magnet Weight 6 oz. Rear Sealing Gasket N/A Solid composition felt dust cap
Gap Height .250”, 6.4 mm Mounting Holes Diameter 0.22’’, 5.6 mm
Voice Coil Diameter 1.0”, 25 mm Mounting Holes B.C.D. 9.60’’, 243.8 mm
Net Weight 2.90 lbs , 1.32 kg
Shipping Weight 4.00 lbs , 1.81 kg

FREQUENCY RESPONSE*
dBSPL
SPL vs Freq Ohm
105 70
60
100 50

40
95
30
90

20
85

80

75 10
9
8
70 7
6
65 5
20 Hz 50 100 200 500 1K 2K 5K 10K 20K

10: Spliced @ 175.0000 smoothed copy

Map

Higher Data = LEGEND1028K

Lower Data = Import: LoFreqCorr96.txt
Notes

4.6.0.371 Person: Project: Oct 31, 2013

May/29/2007
learn more at eminence.com
Company: File: LEGEND1028K.lib Thr 1:50 pm
* See footnotes on page 2 for information regarding nominal impedance, power rating and sensitivity.
 From design and manufacturing to the stage or studio. Once you’ve
experienced the performance of Eminence, you’ll never accept
anything else.

mission statement Eminence is dedicated to providing the best Quality, Value and Service
to meet our customers’ needs.

footnotes * Please consult www.eminence.com for specifications of models with alternative

impedances.

** Multiple units exceed published ratings evaluated under EIA 426A specification while
tested in a free-air, non-temperature-controlled environment.

*** The average output across the usable frequency range when applying 1W/1m into the
nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured
under the following conditions: All speakers are tested at 1W/1m using a variety of test
set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with
the speaker mounted flush against a steel ring for minimum diffraction | Carver PM-120
amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-
made wedges).

**** BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately. Published
usable frequency response contingent upon use of ASD:1001 HF Driver.

***** Multiple units exceeded published ratings evaluated under EIA-426A or AES specification
while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-
controlled environment.

******The average on axis output across the entire usable frequency range when applying
1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves
are measured under the following conditions: All speakers are tested at 1W/1m using
a variety of test set-ups for the appropriate impedance | LMS using 0.25” supplied
microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built
into the wall with horn front mounted | Carver PM-120 amplifier | 2700 cu.ft. chamber
with fiberglass on all six surfaces (three with custom-made wedges).

Prices, specifications and product cosmetics are subject to change without notice.

Follow us:
eminence speaker llc
838 Mulberry Pike, Eminence, KY 40019