Loop-O9500-R-PTN TSPA Test Station: Description
Loop-O9500-R-PTN TSPA Test Station: Description
Loop-O9500-R-PTN TSPA Test Station: Description
Loop-O9500-R-PTN TSPA
Test Station
Description
The Loop-O9500-R-PTN TSPA Test Station is an easy to use, complete testing package for the Loop-O9500-R-PTN
product series. It can be used to perform automatic test to verify the proper operation of most O9500-R-PTN plug-in
cards.
The Loop-O9500R-PTN TSPA Test Station includes golden sample hardware units and a software program Test
Station Pro., with friendly graphical user interface. User may perform automatic test by simple mouse clicks and then
receive testing report.
Features
Perform automatic test to verify the proper operation of the O9500-R-PTN plug-in cards
Simple mouse clicks to perform the test
Friendly graphical user interface
Easy to read function report, with testing result and reasons if fail.
Note 1: The hardware and firmware of the golden samples have special treatment and with different software for
automatic test. Please do not remove for other use.
Note 2: Some of the O9500-R-PTN plug-in cards may require optional golden sample(s) for automatic test. Please
see List of Test Station Supported O9500R-PTN Plug-in Cards in following page for more details.
Note 3: The Test Station Pro. software program only works on golden sample units with license keys.
Loop-O9500-R-PTN-TSPA Test Station Test Station
Loop-O9500-R-PTN-TSPA-Main Note4 is mandatory for testing all the listed plug-in cards.
The O9500 Test Station may require optional golden samples to perform automatic test on specific O9500R-PTN
plug-in cards. Please refer to the table below for the required TSPA golden samples for testing each plug-in card.
Note 4: Please specify the Power Adaptor type for the Test Station Main Package (TSPA-Main)
Loop-O9500-R-PTN-TSPA Test Station Test Station
Ordering Information
To order the Loop Test Station products, you must select Test Station Main package (TSPA-Main) and then the options
for each supported O9500 plug-in cards.
Note: If you already have a Test Station Main Package and wish to upgrade it, simply list the option or options you require
and provide Loop with the serial number of the Test Station product you have already purchased. Please also check if the
Test Station Software Maintenance Agreement (TSPA-SMA) is still valid.
Please replace pa with your selection for the AC-to-DC Power Adaptor.
pa = Description Notes
240 Watt, AC (3.6A, auto sensing) to DC (+48
APA
Vdc, 5A) adaptor for USA
240 Watt, AC (3.6A , auto sensing) to DC (+48
APE
Vdc, 5A) adaptor for Europe
240 Watt, AC (3.6A, auto sensing) to DC (+48
APU
Vdc, 5A) adaptor for UK
The TSPA Golden Samples are listed in the table below. The TSPA Golden Samples have special treatment and with
different software for automatic test. Please do not remove for other use.
TSPA Main Golden Samples (included in TSPA-Main)
Use below ordering codes for spare parts
Loop-O9500-R-PTN-TSPA-CHPA-G TSPA golden sample chassis 1 unit included in TSPA-Main.
Loop-O9500-R-PTN-TSPA-CCPA-G TSPA golden sample controller module 1 unit included in TSPA-Main.
Loop-O9500-R-PTN-TSPA-SD48-G TSPA golden sample power module 1 unit included in TSPA-Main.
Loop-O9500-R-PTN-TSPA-4E1-RJ- TSPA golden sample regular size 4-port 2 units included in TSPA Main.
G E1 module (120 ohm)
Loop-O9500-R-PTN-CBPA-G TSPA golden sample connector board 1 unit included in TSPA-Main
Loop-O9500-R-PTN-TSPA Test Station Test Station
Below table lists the accessories for each TSPA supported O9500 plug-in card. Please order the corresponding
accessories from the table below.
Accessory Pack for O9500-R-PTN-TSPA
Use below ordering codes for spare parts
Model Description Note
Loop-ACC-O9500-R-PTN-TS TSPA Accessory Pack includes
PA
1 EA of Ethernet cable
5 EA of E1/T1 RJ45 cable
4 EA of E1 BNC cable
10 EA of RJ45 parallel cable
1 EA of DB15 loopback plug (X.21)
4 EA of E1/T1 RJ45 loopback plug
2 EA of Dry Contact test tool
1 EA of SC-to-SC optical fiber
4 EA of ST-to-ST optical fiber
6 EA of DB25 loopback plug (V.35)
8 EA of RS232-to-RS232 RJ cable
2 EA of DB44-to-2DB25-1DB9 conversion cable
4 EA of DB25-to-RJ45 cable
2 EA of DB9-to-RJ45 cable
12 EA of RJ11 cable
1 EA of SCSI to SCSI cable(16TE)
2 EA of SCSI to SCSI cable(32TE)
4 EA of SCSI to SCSI cable(63TE)
2 EA of Optical cable(16TE/32TE/63TE)
6 EA of BNC Cable(3TE3)
1 EA of Optical fiber(3TE3)
6 EA of Optical cable(B16)
11 EA of Ethernet cable(9EoS4NSW)
11 EA of Ethernet cable(9EoS4SW)
6 EA of Optical cable(CC16)
Loop-ACC-CAB-USBM-200- USB Male to DSUB-9 pin/Male conversion cable 1 unit included in TSPA-Main.
1DB09M Length: 200 cm Use the order code for spare parts.
LabVIEW Compatible Conversion Cable
Loop-O9500-R-PTN-TSPA-Main-APA-G
Loop-O9500-R-PTN-TSPA-RTB-G
Loop-O9500-R-PTN-TSPA-8DC-G
Loop-O9500-R-PTN-TSPA-SMA
The ordered TSPA components contains Test Station Main golden samples, RTB golden sample, 8DC golden sample, Test
Station Pro. software program, AC-to-DC power adaptor for USA, 1 set of accessory pack for performing automatic test,
with 1 year of software maintenance agreement.
Loop-O9500-R-PTN-TSPA Test Station Test Station
Application Illustrations