Datasheet

Huawei AirEngine 8760-X1-

PRO Access Point Datasheet

www.huawei.com
Product Overview
Huawei AirEngine 8760-X1-PRO is a next-generation flagship indoor access point (AP) that complies with the Wi-Fi 6 (802.11ax)
standards. This high-performance AP supports flexible switching among three modes: dual-radio, triple-radio, and dual-radio +
one scanning radio, achieving a device rate of up to 10.75 Gbps. The AP uses built-in smart antennas to move Wi-Fi signals
with users, significantly enhancing users' wireless network experience. The AP provides uplink optical and electrical ports,
allowing customers to select different deployment modes based on scenarios. These strengths make AirEngine 8760-X1-PRO
ideal for scenarios such as enterprise office, government, higher education, and primary/secondary education.

AirEngine 8760-X1-PRO

 Supports dual radios: 2.4GHz (4x4) + 5GHz (12x12), dual radios: 2.4GHz (4x4) + 5GHz (8x8) + independent radio
scanning mode, triple radios: 2.4GHz (4x4) + 5GHz (8x8) + 5GHz (4x4). These modes can be flexibly switched. The maximum
rate is up to 1.15 Gbps at 2.4GHz band, 9.6 Gbps at 5GHz band, and 10.75 Gbps for the device.
 2 x 10 GE electrical and 1 x 10 GE SFP+.
 USB interface can be used for external power supply, external IoT expansion, and storage.
 Smart antenna enables targeted signal coverage for mobile terminals, reduces interferences, and improves signal quality.
Additionally, it implements millisecond-level switchover as STAs move.
 Built-in IoT slots, supporting IoT expansion such as BLE 5.0, ZigBee, RFID, and Thread
 Independent radio scanning, achieving real-time detection of interference and rogue devices in real time and timely
network optimization.
 Supports Bluetooth serial interface-based O&M through built-in Bluetooth and CloudCampus APP, and precise locating of
Bluetooth terminals by collaborating with location server.
 Supports the Fat, Fit, and cloud three working modes.

 Two 10GE electrical ports support dual PoE in hot backup power supply.
 10GE electrical port compatible with 100M/1000M/2.5GE/5GE
 10G SFP+ optical ports support 10GE/GE/GPON/XGPON/XGSPON optical modules.

Feature Descriptions
Wi-Fi 6 (802.11ax) standards
 As the latest generation Wi-Fi standards of IEEE 802.11, 802.11ax improves user experience in high-density access
scenarios and supports 2.4 GHz and 5 GHz frequency bands.
 UL/DL MU-MIMO on both the 2.4 GHz and 5 GHz frequency bands, allowing an AP to transmit data to and receive data
from multiple STAs simultaneously and multiplying the utilization of radio spectrum resources
 1024QAM modulation, improving data transmission efficiency by 25% compared with 802.11ac (256QAM).

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 2

 UL/DL OFDMA scheduling enables multiple users to receive and send information at the same time, reducing latency and
improving network efficiency.
 Spatial reuse (SR) technology uses basic service set (BSS) coloring to enable APs and STAs to distinguish BSSs,
minimizing co-channel interference.
 The target wake time (TWT)* allows APs and STAs to negotiate the sleep and wake time with each other, thereby
improving the battery life of the STAs.

This function can be implemented through software upgrades.

Flexible radio mode switchover

The AP can flexibly switch among three modes: dual-radio, triple -radio, and dual-radio + independent dual-band scanning.

 The dual-radio mode is recommended in scenarios dominated by high-bandwidth services to provide ultra-large throughput
of more than 10 Gbps.
 The triple-radio mode is recommended in high-density access or high-concurrency scenarios to allow more users to get
access to the network.
 The dual-radio + independent dual-band scanning mode is recommended in scenarios where the network status and
interference need to be monitored in real time. In this mode, the network quality is monitored and optimized in real time through
independent dual-band scanning with no sacrifice of the user access performance and user throughput.
 In large-scale networking, APs working in different radio modes can be deployed. This practice is well suited to different
service scenarios and traffic types, effectively improving the network-wide performance and reducing the total cost of operation
(TCO).

MU-MIMO
The AP supports a maximum of 16 spatial streams: four spatial streams for the 2.4 GHz radio and 12 spatial streams for 5 GHz
radios. UL/DL MU-MIMO technology enables an AP to send data to multiple STAs simultaneously, which doubles the radio
spectrum resource usage, increases the number of access users and bandwidth, and improves user experience in high-density
access scenarios.

Smart antenna
The AP equipped with the dual-band smart antenna array and intelligent switchover algorithm can intelligently detect the
application environment and access density, achieving more accurate signal coverage and interference suppression. In addition,
each smart antenna has four elements that are controlled by a high-frequency electronic switch to achieve better performance.
This design helps provide the optimal signal coverage direction and signal quality for each mobile access STA, bringing
seamless and smooth wireless network access experience to the users.

Wired & wireless signal transmission @ 10GE

 The AP provides 160 MHz bandwidth, signifying many more available data subcarriers and extending the signal
transmission channel. In addition, the AP adopts 1024-QAM and MU-MIMO technologies, increasing the rate of 5 GHz radios up
to 9.6 Gbps. The AP rate can reach 10.75 Gbps for the device.
 The AP provides dual 10GE ports, dual PoE power supplies, and dual-link redundancy backup, achieving a much stable
device performance. In addition, the AP provides a 10GE SPF+ uplink port, which frees users from the optical/electrical port
selection issue and helps implement flexible networking in scenarios requiring intenal/external network isolation and hybrid
networking of optical/electrical ports.

High density boost technology

Huawei uses the following technologies to address challenges in high-density scenarios, including access problems, data
congestion, and poor roaming experience:

SmartRadio for air interface optimization

 Load balancing during smart roaming: The load balancing algorithm can work during smart roaming for load balancing
detection among APs on the network after STA roaming to adjust the STA load on each AP, improving network stability.

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 3

 Intelligent DFA technology: The dynamic frequency assignment (DFA) algorithm is used to automatically detect adjacent-
channel and co-channel interference, and identify any 2.4 GHz redundant radio. Through automatic inter-AP negotiation, the
redundant radio is automatically switched to another mode (dual-5G AP models support 2.4G-to-5G switchover) or is disabled to
reduce 2.4 GHz co-channel interference and increase the system capacity.
 Intelligent conflict optimization technology: The dynamic enhanced distributed channel access (EDCA) and airtime
scheduling algorithms are used to schedule the channel occupation time and service priority of each user. This ensures that
each user is assigned relatively equal time for using channel resources and user services are scheduled in an orderly manner,
improving service processing efficiency and user experience.

Air interface performance optimization

 In high-density scenarios where many users access the network, increased number of low-rate STAs consumes more
resources on the air interface, reduces the AP capacity, and lowers user experience. Therefore, Huawei APs will check the
signal strength of STAs during access and rejects access from weak-signal STAs. At the same time, the APs monitor the rate of
online STAs in real time and forcibly disconnect low-rate STAs so that the STAs can reassociate with APs that have stronger
signals. The terminal access control technology can increase air interface use efficiency and allow access from more users.

5GHz-prior access (band steering)

 The APs support both 2.4G and 5G frequency bands. The 5GHz-prior access function enables an AP to steer STAs to the
5 GHz frequency band first, which reduces load and interference on the 2.4 GHz frequency band, improving the user experience.

Wired and wireless dual security guarantee

To ensure data security, Huawei APs integrate wired and wireless security measures and provide comprehensive security
protection.

Authentication and encryption for wireless access

 The APs support WEP, WPA/WPA2-PSK, WPA3-SAE*, WPA/WPA2-PPSK, WPA/WPA2/WPA3*-802.1x, and WAPI
authentication/encryption modes to ensure security of the wireless network. The authentication mechanism is used to
authenticate user identities so that only authorized users can access network resources. The encryption mechanism is used to
encrypt data transmitted over wireless links to ensure that the data can only be received and parsed by expected users.

This function can be implemented through software upgrades.

Analysis on non-Wi-Fi interference sources

 Huawei APs can analyze the spectrum of non-Wi-Fi interference sources and identify them, including baby monitors,
Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz
and 5 GHz frequency bands), wireless game controllers, and microwave ovens. Coupled with Huawei NCE-Campus, the precise
locations of the interference sources can be detected, and the spectrum of them displayed, enabling the administrator to remove
the interference in a timely manner.

Rogue device monitoring

 Huawei APs support WIDS/WIPS, and can monitor, identify, defend, counter, and perform refined management on the
rogue devices, to provide security guarantees for air interface environment and wireless data transmission.

Wired access authentication and encryption for the AP

 The AP access control ensures validity of APs. The CAPWAP link protection and DTLS/IPsec encryption provide security
assurance, improving data transmission security between the AP and the AC.

Automatic radio calibration

 Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and
generate an AP topology according to the collected data. Based on interference from and loads of authorized APs, rogue APs,
and non-Wi-Fi interference sources, each AP automatically adjusts its transmit power and working channel to make the network
operate at the optimal performance. In this way, network reliability and user experience are improved.

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 4

Automatic application identification
Huawei APs support smart application control technology and can implement visualized control on Layer 4 to Layer 7
applications.

Traffic identification

 Coupled with Huawei WLAN ACs, the APs can identify over 6000 common applications in various office scenarios. Based
on the identification results, policy control can be implemented on user services, including priority adjustment, scheduling,
blocking, and rate limiting to ensure efficient bandwidth resource use and improve quality of key services.

Traffic statistics collection

 Traffic statistics of each application can be collected globally, by SSID, or by user, enabling the network administrator to
know application use status on the network. The network administrator or operator can implement visualized control on service
applications on smart terminals to enhance security and ensure effective bandwidth control.

IoT extension
The AP has a built-in IoT module and provides a more stable PCIE port, achieving flexible extension of IoT protocols, such as
RFID, ZigBee, BLE, and Thread. This practice helps implement the most comprehensive indoor IoT solution. Therefore, the AP
is widely applied in shopping malls, supermarkets, office campuses, classrooms, and industrial IoT scenarios. In addition, the AP
has a unique industrial-grade shell. After opening the shell in one-click, you can install an IoT card that is plug-and-play (PnP)
with no need to route cables, presenting a pleasant appearance and simplifying O&M.

Leader AP*
The leader AP integrates some WLAN AC functions and can be used to manage Fit APs in small- and medium-sized enterprises
and stores, implementing WLAN AC-free access not requiring licenses and saving customer investment.

This function can be implemented through software upgrades.

Cloud-based management
The AP can be managed via cloud, eliminating the need to deploy a WLAN AC. In cloud-based management mode, abundant
authentication functions, such as pre-shared key (PSK) authentication, Portal authentication, SMS authentication, and social
media authentication, can be implemented with no authentication server. This mode significantly simplifies the networking and
reduces the capital expenditure (CAPEX). In addition, multiple advanced functions, such as online cloud-based network
planning, cloud-based deployment, cloud-based inspection, and cloud-based O&M, can be implemented through Huawei cloud
management platform. In multi-branch deployment scenarios, cloud APs are pre-configured on the cloud management platform.
During onsite network deployment, you only need to power on the cloud APs, connect them to the network ports of switches,
and implement plug-and-play (PnP) of the APs by scanning the QR codes. The pre-configurations then are automatically
delivered to the APs, significantly shortening the network deployment time. The cloud management platform can monitor the
network status, device status, and STA connection status of all sites in a comprehensive and intuitive manner.

Basic Specifications
Fat/Fit AP mode
Item Description

WLAN features Compliance with IEEE 802.11ax and compatibility with IEEE 802.11a/b/g/n/ac/ac Wave 2
Flexible switchover between triple-radio and dual-radio modes, 16 spatial streams, providing up to
10.75 Gbps
Maximum ratio combining (MRC)
Space time block code (STBC)
Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD)
Beamforming

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 5

 Item Description
DL/UL MU-MIMO
DL/UL OFDMA
Compliance with 1024-QAM and compatibility with 256-QAM/64-QAM/16-QAM/8-
QAM/QPSK/BPSK
Target wake time (TWT)*
NOTE
This function can be implemented through software upgrades.
Low-density parity-check (LDPC)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz, and 160 MHz modes
Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement
priority-based data processing and forwarding. Automatic and manual rate adjustment (the rate is
adjusted automatically by default)
WLAN channel management and channel rate adjustment
NOTE
For detailed management channels, see the Country Code & Channel Compliance Table.
Automatic channel scanning and interference avoidance
Separate service set identifier (SSID) hiding configuration for each AP, supporting Chinese SSIDs
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (APs) in Fit AP mode
Automatic login in Fit AP mode
Extended Service Set (ESS) in Fit AP mode
Multi-user CAC
Advanced cellular coexistence (ACC), minimizing the impact of interference from cellular networks
802.11k and 802.11v smart roaming
802.11r fast roaming (≤ 50 ms)
WAN authentication escape. In local forwarding mode, this function retains the online state of
existing STAs and allows access of new STAs when APs are disconnected from an AC, ensuring
service continuity

Network features Compliance with IEEE 802.3ab

Auto-negotiation of the rate and duplex mode and automatic switchover between the Media
Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1q
SSID-based VLAN assignment
Uplink VLAN trunks on Ethernet ports
Management channel of the AP's uplink port in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
IPv4/IPv6 access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup in Fit AP mode

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 6

 Item Description
Network Address Translation (NAT) in Fat AP mode
IPv6 in Fit AP mode
Soft Generic Routing Encapsulation (GRE)
IPv6 Source Address Validation Improvements (SAVI)
Multicast Domain Name Service (mDNS) gateway protocol: supports AirPlay and AirPrint service
sharing between users of different VLANs

QoS features WMM parameter management for each radio

WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and
radio environment) to improve user experience
Smart Application Control (SAC) in Fit AP mode
Airtime scheduling
Application acceleration for VR and mobile gaming
Air interface HQoS scheduling
Support for Microsoft Lync APIs and high voice call quality through Lync API identification and
scheduling

Security features Open system authentication

WEP authentication/encryption using a 64-bit, 128-bit, 152-bit or 192-bit* encryption key
WPA2-PSK authentication and encryption (WPA2 personal edition)
WPA2-802.1X authentication and encryption (WPA2 enterprise edition)
WPA3-SAE authentication and encryption (WPA3 personal edition)*
WPA3-802.1X authentication and encryption (WPA3 enterprise edition) *
WPA-WPA2 hybrid authentication
WPA2-WPA3 hybrid authentication*
NOTE
This function can be implemented through software upgrades.
WPA2-PPSK authentication and encryption in Fit AP mode
Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS),
including rogue device detection and countermeasure, attack detection and dynamic blacklist, and
STA/AP blacklist and whitelist
802.1X authentication, MAC address authentication, and Portal authentication
DHCP snooping
Dynamic ARP Inspection (DAI)
IP Source Guard (IPSG)
802.11w Protected Management Frames (PMFs)

Maintenance features Unified management and maintenance on the AC in Fit AP mode

Automatic login, automatic configuration loading, and plug-and-play (PnP) in Fit AP mode
Automatic batch upgrade in Fit AP mode
Telnet
STelnet using SSHv2
SFTP using SSHv2
Remote wireless O&M through the Bluetooth console port

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 7

 Item Description
Web system-based AP management in Fat AP mode, login through HTTP or HTTPS
Real-time configuration monitoring and fast fault location using the NMS
SNMP v1/v2/v3 in Fat AP mode
System status alarm
Network Time Protocol (NTP) in Fat AP mode

BYOD NOTE
The AP supports bring your own device (BYOD) only in Fit AP mode.
Device type identification according to the organizationally unique identifier (OUI) in the MAC
address
Device type identification according to the user agent (UA) information in an HTTP packet
Device type identification according to DHCP options
The RADIUS server delivers packet forwarding, security, and QoS policies according to the device
type carried in the RADIUS authentication and accounting packets.

Location service NOTE

The AP supports the location service only in Fit AP mode.
STA location
Working with the location server to locate rogue devices
Bluetooth location

Spectrum analysis NOTE

The AP supports spectrum analysis only in Fit AP mode.
Identification of more than eight interference sources including bluetooth devices, microwave
ovens, cordless phones, ZigBee devices, game controllers, 2.4 GHz/5 GHz wireless video and
audio devices, and baby monitors
Working with the location server to locate interference sources and perform spectrum analysis on
them

Cloud-based management mode

Item Description

WLAN features Compliance with IEEE 802.11a/b/g/n/ac/ac Wave 2/ax

Flexible switchover between triple-radio and dual-radio modes, 16 spatial streams, providing up to
10.75 Gbps
Maximum ratio combining (MRC)
Space time block code (STBC)
Beamforming
Low-density parity-check (LDPC)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement
priority-based data processing and forwarding
WLAN channel management and channel rate adjustment
NOTE
For detailed management channels, see the Country Code & Channel Compliance Table.
Automatic channel scanning and interference avoidance
Service set identifier (SSID) hiding
Signal sustain technology (SST)

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 8

 Item Description
Unscheduled automatic power save delivery (U-APSD)
Automatic login

Network features Compliance with IEEE 802.3ab

Auto-negotiation of the rate and duplex mode and automatic switchover between the Media
Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1q
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
Management channel of the AP uplink port in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
IPv4/IPv6 Access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup in Fit AP mode
Network Address Translation (NAT) in Fat AP mode
IPv6 in Fit AP mode
Soft Generic Routing Encapsulation (GRE)
IPv6 Source Address Validation Improvements (SAVI)
Multicast Domain Name Service (mDNS) gateway protocol: supports AirPlay and AirPrint service
sharing between users of different VLANs

QoS features WMM parameter management for each radio

WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Airtime scheduling
Application acceleration for VR and mobile gaming
Air interface HQoS scheduling

Security features Open system authentication

WEP authentication/encryption using a 64-bit, 128-bit, 152-bit or 192-bit* encryption key
WPA2-PSK authentication and encryption (WPA2 personal edition)
WPA2-802.1X authentication and encryption (WPA2 enterprise edition)
WPA3-SAE authentication and encryption (WPA3 personal edition)*
WPA3-802.1X authentication and encryption (WPA3 enterprise edition) *
WPA-WPA2 hybrid authentication
WPA2-WPA3 hybrid authentication*
NOTE
This function can be implemented through software upgrades.
802.1x authentication, MAC address authentication, and Portal authentication
DHCP snooping
Dynamic ARP Inspection (DAI)

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 9

 Item Description
IP Source Guard (IPSG)

Maintenance features Unified management and maintenance on the Agile Controller

Automatic login and configuration loading, and plug-and-play (PnP)
Batch upgrade
Telnet
STelnet using SSH v2
SFTP using SSH v2
Remote wireless O&M through the Bluetooth console port
Web local AP management through HTTP or HTTPS
Real-time configuration monitoring and fast fault location using the NMS
System status alarm
Network Time Protocol (NTP)

Technical Specifications
Item Description

Technical Dimensions (H x W x D) 220x220x61mm

specifications
Weight 1.85kg

Interface type 2 x 10 GE electrical and 1 x 10 GE SFP+

1 x USB
NOTE
 10GE electrical port can compatible with
100M/1000M/2.5GE/5GE.
 10G optical port can compatible with
10GE/GE/GPON/XGPON/XGSPON optical modules.

IoT expansion Build in IoT slots: Supporting PCIe cards such as ZigBee, RFID, and
Thread.

Bluetooth Build in BLE5.0

LED indicator Indicates the power-on, startup, running, alarm, and fault states of the
system.

Power specifications Power input  DC: 48V±10%

 PoE power supply: In compliance with 802.3at/bt
NOTE
 Two 10GE electrical ports work in PoE In hot backup mode.

 Two 10GE electrical ports (802.3at PoE+) can be aggregation

power supply.

PoE power supply mode 2.4GHz 5GHz Maximum power consumption

(excluding USB and IoT)

802.3bt (PoE++) Class 6 4x4 12x12 <51W

4x4 4x4+8x8

802.3at（PoE+） 2x2 4x4 <25.5W

NOTE

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 10

 Item Description
For details about the working status of the Ethernet port, IoT, and USB in different power supply
modes, see the Specification Query Tool.
The actual maximum power consumption depends on local laws and regulations.

Environmental Operating temperature -10°C to +50°C

specifications
Storage temperature -40°C to +70°C

Operating humidity 5% to 95% (non-condensing)

Altitude -60 m to +5000 m

Atmospheric pressure 53 kPa to 106 kPa

Radio specifications Antenna type Built-in smart antennas

Antenna gain 2.4G: 4dBi

5G: 5dBi
NOTE
 The gains above are the single-antenna peak gains.

Maximum number of ≤ 16
SSIDs for each radio

Maximum number of ≤ 1024 (dual-radio)

users ≤ 1152 (triple-radio)
NOTE
The actual number of users varies according to the environment.

Maximum transmit 2.4G: 26dBm (combined power)

power 5G: 31dBm (combined power)
NOTE
The actual transmit power depends on local laws and regulations.

Power increment 1 dBm

Maximum number of 2.4 GHz (2.412 GHz to 2.472 GHz)

non-overlapping  802.11b/g
channels
− 20 MHz: 3
 802.11n
− 20 MHz: 3
− 40 MHz: 1
 802.11ax
− 20 MHz: 3
− 40 MHz: 1
5 GHz (5.18 GHz to 5.825 GHz)
 802.11a
− 20 MHz: 13
 802.11n
− 20 MHz: 13
− 40 MHz: 6
 802.11ac
− 20 MHz: 13
− 40 MHz: 6

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 11

 Item Description
− 80 MHz: 3
− 160 MHz: 1
 802.11ax
− 20 MHz: 13
− 40 MHz: 6
− 80 MHz: 3
− 160 MHz: 1
NOTE
The table uses the number of non-overlapping channels supported
by China as an example. The number of non-overlapping channels
varies in different countries. For details, see the Country Codes &
Channels Compliance

Standards Compliance
Item Description

Safety UL 62368–1 GB 4943 CAN/CSA 22.2 No.60950-1

standards EN 62368–1 EN 60950–1 IEC 60950–1
IEC 62368–1 UL 60950–1

Radio ETSI EN 300 328 RSS-210 AS/NZS 4268

standards ETSI EN 301 893

EMC EN 301 489–1 ITU k.20 EN 55024

standards EN 301 489–17 GB 9254 CISPR 22
ETSI EN 60601-1-2 GB 17625.1 CISPR 24
FCC Part 15 AS/NZS CISPR22 IEC61000-4-6
ICES-003 EN 55022 IEC61000-4-2
YD/T 1312.2-2004

IEEE IEEE 802.11a/b/g IEEE 802.11h IEEE 802.11u

standards IEEE 802.11n IEEE 802.11d IEEE 802.11v
IEEE 802.11ac IEEE 802.11e IEEE 802.11w
IEEE 802.11ax IEEE 802.11k IEEE 802.11r

Security 802.11i, Wi-Fi Protected Access 2(WPA2), WPA, WPA3*

standards NOTE
This function can be implemented through software upgrades.
802.1X
Advanced Encryption Standards(AES), Temporal Key Integrity Protocol(TKIP)
EAP Type(s)

EMF CENELEC EN 62311 OET65 FCC Part1&2

CENELEC EN 50385 RSS-102 FCC KDB Series

RoHS Directive 2002/95/EC & 2011/65/EU

Reach Regulation 1907/2006/EC

WEEE Directive 2002/96/EC & 2012/19/EU

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 12

Antennas Pattern

2.4GHz (Horizontal) 2.4GHz (Vertical)

5GHz (Horizontal) 5GHz (Vertical)

More Information
For more information about Huawei WLAN products, visit http://e.huawei.com or contact us in the following ways:

 Global service hotline: http://e.huawei.com/en/service-hotline

 Logging in to the Huawei Enterprise technical support web: http://support.huawei.com/enterprise/
 Sending an email to the customer service mailbox: support_e@huawei.com

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 13

 Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or
part of the products, services and features described in this document may not be within the purchase scope or the usage
scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website:www.huawei.com

Huawei AirEngine 8760-X1-PRO Access Point Datasheet 14