Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    Service Bulletin Trucks: Overflow Valve Replacement

    Uploaded by

    Andrey Gaivoronsky
    This service bulletin provides instructions for replacing the overflow valve on a Volvo D12D engine. It notes that the overflow valve should be replaced if its opening pressure is below specifications, as checked in the fuel supply pressure fault tracing checklist. The instructions describe removing the old overflow valve from the intake pipe, cleaning the sealing surfaces, and installing the new overflow valve with new copper washers while tightening it to a torque of 55 ± 5 Nm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Service Bulletin Trucks: Overflow Valve Replacement

    Uploaded by

    Andrey Gaivoronsky
    68 views2 pages
    This service bulletin provides instructions for replacing the overflow valve on a Volvo D12D engine. It notes that the overflow valve should be replaced if its opening pressure is below specifications, as checked in the fuel supply pressure fault tracing checklist. The instructions describe removing the old overflow valve from the intake pipe, cleaning the sealing surfaces, and installing the new overflow valve with new copper washers while tightening it to a torque of 55 ± 5 Nm.

    Original Description:

    Volvo Service Bulletin

    Original Title

    PV776-TSP188410

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service bulletin provides instructions for replacing the overflow valve on a Volvo D12D engine. It notes that the overflow valve should be replaced if its opening pressure is below specifications, as checked in the fuel supply pressure fault tracing checklist. The instructions describe removing the old overflow valve from the intake pipe, cleaning the sealing surfaces, and installing the new overflow valve with new copper washers while tightening it to a torque of 55 ± 5 Nm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    68 views2 pages

    Service Bulletin Trucks: Overflow Valve Replacement

    Uploaded by

    Andrey Gaivoronsky
    This service bulletin provides instructions for replacing the overflow valve on a Volvo D12D engine. It notes that the overflow valve should be replaced if its opening pressure is below specifications, as checked in the fuel supply pressure fault tracing checklist. The instructions describe removing the old overflow valve from the intake pipe, cleaning the sealing surfaces, and installing the new overflow valve with new copper washers while tightening it to a torque of 55 ± 5 Nm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Service Bulletin

    Volvo Trucks North America, Inc.


    Greensboro, NC USA Trucks
    This Service Bulletin replaces SB 233–20, “Overflow Date Group No. Page
    Valve, D12D” (11.02), publication no. 3.2003 233 20 1(2)
    PV776–TSP180868.
    Overflow Valve
    Replacement
    D12D

    Overflow Valve Replacement

    W2003390

    This information covers replacing the overflow valve on the VOLVO D12D engine.

    Contents
    • “Overflow Valve, Replacement” page 2

    NOTE: Information is subject to change without notice.

    Illustrations are used for reference only and may differ slightly from the actual vehi-
    cle being serviced. However, key components addressed in this information are
    represented as accurately as possible.

    PV776-TSP188410 USA13399
    Volvo Trucks North America, Inc. Date Group No. Page
    Service Bulletin 3.2003 233 20 2(2)

    2339-03-02-02
    Overflow Valve, Replacement
    See also:

    • “Overflow Valve Replacement” page 1

    You must read and understand the precautions and


    guidelines in Service Information, group 20, "General
    Safety Practices, Engine" before performing this pro-
    cedure. If you are not properly trained and certified in
    this procedure, ask your supervisor for training before
    you perform it.

    NOTE: Replace the overflow valve if a check shows that


    its opening pressure is below specifications. To check
    the overflow valve, refer to Service Information, group
    23: “Fuel Supply Pressure, Fault Tracing, Checklist B.”

    1
    Remove the overflow valve from the
    intake pipe.

    2
    Clean the sealing surfaces.

    W2003390

    Install a new overflow valve with new 55 ± 5 Nm


    copper washers and tighten the over- (40 ± 4 ft-lb)
    flow valve to 55 ± 5 Nm (40 ± 4 ft-lb).

    You might also like