This document provides a job aid for identifying different types of optical connectors and components used in optical fiber systems. The objective is for participants to be able to identify various optical fiber connectors, understand applications of different optical components, and locate components in PDH/SDH systems. The job aid outlines exercises for participants to identify connectors, components, and their uses and applications through demonstrations, writing, and a self-assessment quiz.
This document provides a job aid for identifying different types of optical connectors and components used in optical fiber systems. The objective is for participants to be able to identify various optical fiber connectors, understand applications of different optical components, and locate components in PDH/SDH systems. The job aid outlines exercises for participants to identify connectors, components, and their uses and applications through demonstrations, writing, and a self-assessment quiz.
This document provides a job aid for identifying different types of optical connectors and components used in optical fiber systems. The objective is for participants to be able to identify various optical fiber connectors, understand applications of different optical components, and locate components in PDH/SDH systems. The job aid outlines exercises for participants to identify connectors, components, and their uses and applications through demonstrations, writing, and a self-assessment quiz.
This document provides a job aid for identifying different types of optical connectors and components used in optical fiber systems. The objective is for participants to be able to identify various optical fiber connectors, understand applications of different optical components, and locate components in PDH/SDH systems. The job aid outlines exercises for participants to identify connectors, components, and their uses and applications through demonstrations, writing, and a self-assessment quiz.
3.1 Title: Identification of different types of Optical connectors & components used in Optical Fiber Systems and their applications.
3.2 Objective: On completion of this visit/ practical exercise, the participant will be able to: a) Identify the different types of Optical Fiber connectors used in FDF/FDMS and in System. b) Understand application of different optical components.
3.3 Venue/Site: Training Center.
[*In training locations where the required equipment / set-up is not available, the same will be carried out through field visit]
3.4 Set up/Equipments Required:
Different types of Optical Connectors & components. FDF/FDMS PDH/SDH/DWDM System 3.5 Exercise: 3.5.1 Standard Installation practice used for equipment to be taught (if applicable) like: • Marking of lines to mount the equipment’s Iron work installation • Power DC distribution panel installation • Mounting of Racks • Cable preparation and laying • Powering ON • Software installation • Equipping different modules • Testing 3.5.2 Demonstration by Faculty. 3.5.3 Write down the components of Optical Fiber Cable?
EETP/BSNL Silver Certification Course Page 1 of 4
For Restricted Circulation Digital Transmission System (DTS) Job Aid 3
3.5.4 List down the items/objects related to OF Network and their use?
Name of Item Use
3.5.5 Identify the different types of Optical Connectors and their applications?
Connectors Connector Type Applications
3.5.6 Locate the different Optical Component and their Connectivity in PDH/SDH System?
S. No. Name of Optical Component Applications
1 Transmitter card
EETP/BSNL Silver Certification Course Page 2 of 4
For Restricted Circulation Digital Transmission System (DTS) Job Aid
2 Receiver card
3 LASER
4 APD
5 Pigtail/Patch Cord Connectivity
3.6 Learning Outcome :( to be filled by participants)
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
……………………………………………………………………………………
3.7: Self-Assessment:
(1) Which one is information carrying part in OFC communication
(a) Core (b) Cladding (c) Both (a) and (b) (d) Whole OFC (2) Which one of the following is not a component of OFC (a) Buffer tube (b) Strengthening Fiber (c) Cable Jackets (d) Jumper wire (3) Which of the following statement is true (a) In OFC information is travelling as light signal (b) In OFC information is travelling as electrical signal (c) Both (a ) and (b) are true (d) Both ( a) and (b) are false (4) TJB stands for ……………………….. (a) Trunk Joint Box (b) Termination Joint Box (c) Trunk junction Box
EETP/BSNL Silver Certification Course Page 3 of 4
For Restricted Circulation Digital Transmission System (DTS) Job Aid (d) Termination junction Box (5) FC-PC is ……. (a) Full connector- Personal Connector (b) Frame connector – Physical connector (c) Ferrule connector – Physical connector (d) Fiber connector – Physical connector (6) SC is …………….. (a) Square connector (b) Spare connector (c) SDH Connector (d) Synchronous connector (7) Which of the following is false (a) Patch cord is tight buffer tube cable (b) Pigtail is used for indoor application (c) Both ends of pigtail is having connectors. (d) Patch cord is used for indoor application. (8) What is the function of Transmitter (Source) (a) Optical to electrical conversion (b) Electrical to optical conversion (c) Both (a ) and (b) (d) None of the above (9) Example of Optical source is (a) LD (b) LED (c) Both (a) and (b) (d) None of the above (10) What is the function of APD (a) Optical to electrical conversion (b) Electrical to optical conversion (c) Both (a) and (b) (d) None of the above
