Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Drill String Archives - Drilling Formulas and Drilling Calculations

    Uploaded by

    Amine Mimo
    The document discusses vibration in drill strings during drilling operations. It explains that vibration is a major cause of downtime and introduces different vibration modes that can occur downhole. It also provides a transcript of a video that describes common drill string components and their functions. Finally, it discusses two main factors that can cause drill string failures: stresses from tension during drilling and tripping operations as well as corrosion effects over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Drill String Archives - Drilling Formulas and Drilling Calculations

    Uploaded by

    Amine Mimo
    56 views9 pages
    The document discusses vibration in drill strings during drilling operations. It explains that vibration is a major cause of downtime and introduces different vibration modes that can occur downhole. It also provides a transcript of a video that describes common drill string components and their functions. Finally, it discusses two main factors that can cause drill string failures: stresses from tension during drilling and tripping operations as well as corrosion effects over time.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses vibration in drill strings during drilling operations. It explains that vibration is a major cause of downtime and introduces different vibration modes that can occur downhole. It also provides a transcript of a video that describes common drill string components and their functions. Finally, it discusses two main factors that can cause drill string failures: stresses from tension during drilling and tripping operations as well as corrosion effects over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    56 views9 pages

    Drill String Archives - Drilling Formulas and Drilling Calculations

    Uploaded by

    Amine Mimo
    The document discusses vibration in drill strings during drilling operations. It explains that vibration is a major cause of downtime and introduces different vibration modes that can occur downhole. It also provides a transcript of a video that describes common drill string components and their functions. Finally, it discusses two main factors that can cause drill string failures: stresses from tension during drilling and tripping operations as well as corrosion effects over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9
    At a glance
    Powered by AI
    The key takeaways from the document are that vibration in drillstrings can cause downtime and needs to be understood. Different vibration modes are explained in a video. Combined load charts should be used and understood when pulling stuck pipe with torque to avoid exceeding limits. Drillstring commonly fails due to stresses like tension and corrosion.

    The main vibration mechanisms explained in the video are axial vibration, lateral vibration, whirling, bit bounce, and stick-slip.

    When pulling stuck pipe with torque, the combined load chart (torque-tension graph) should be referred to in order to determine the tensile capacity limitations before pulling.

    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    About This Blog Contact Us Privacy Policy

     MENU

    SPONSORED SEARCHES
    drill pipe drilling rig down hole drill

    drill string tensile strength directional drilling

    Category Archives: Drill String

    Vibration Mechanisms In Drillstring by SperrySun


    By DrillingFormulas.Com | September 27, 2015 - 12:18 pm |Directional Drilling, Drill String Leave a comment

    Vibration in drillstring is one of major downtime associated with drilling operation. Therefore, it is very important to learn and understand what each
    vibration mechanism is. This VDO created by Sperry Drilling Services well explains various of vibration modes that is happened downhole with the
    drillstring. You can watch the VDO here and we also provide full VDO transcription to help learns get more understanding about the content if the
    learners cannot catch all wordings from this VDO.

    Vibration Mechanisms Explained

    Full VDO Transcript Continue reading →

    Tagged drill string, vibration

    Using Combined Load Chart For Stuck Pipe Situation


    By DrillingFormulas.Com | June 20, 2015 - 6:00 am |Drill String, Stuck Pipe Leave a comment

    When the drill string get stuck, there are several ways to free the string as using Jar (up and/or down), straight pull, working torque down, etc. Pulling
    stuck pipe with torque in the drill string is one of those technique which often utilize to free the stuck drill string. However, there are some concerns that
    you should know before doing this because torque in the string will reduce a tensile capacity of tubular. This is very important to read and understand the
    combined load chart (Torque‐Tension Graph) in order to determine the limitation before pulling the pipe.

    www.drillingformulas.com/category/drill-string/ 1/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    For this example, we use 5” DP, S-135, NC50 (4-1/2” IF connection) to be a reference figure.

    Pipe information

    Pipe Size and Weight: 5.000″ 19.50ppf 0.362″ wall IEU


    Pipe Grade: S-135
    Range: 2
    Tool Joint: 6.625″ X 3.250″ NC50
    Tool Joint 120,000 psi Material Yield Strength
    Premium class

    Continue reading →

    Tagged Combined Load Chart, drill string, stuck pipe

    Basic of Drillpipe Tensile Capacity and Its Calculation


    By DrillingFormulas.Com | January 5, 2014 - 4:51 pm |Drill String 15 Comments

    This article demonstrates basic knowledge understanding of tensile capacity of the drill pipe and some calculation. First of all we need to know basic of
    material strength and for our case is strength of metal.

    There are few simple terminologies which we would like to explain.

    Stress (σ)
    Stress (σ) equals to force divided by cross sectional area of the material (F/A). For our case, we will discuss about only stress in tensile because the drill
    pipe is almost always designed to work in a tensile condition.

    www.drillingformulas.com/category/drill-string/ 2/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    Stress (σ) = F/A

    Figure 1 – Stress (σ) = F/A

    Continue reading →
    Tagged drill string design, drillpipe, Drillpipe Tensile Capacity

    Drill String Components – VDO Training


    By DrillingFormulas.Com | December 19, 2013 - 5:29 pm |Drill String, Oil Field Knowledge, Oil Field Videos 7 Comments

    This is a great VDO Training about drill string components. We also added the detailed transcripts so you can learn from the VDO effectively.

    Please give us comments if you think this is useful for you.

    Transcription of Drill String Components

    www.drillingformulas.com/category/drill-string/ 3/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    There are many components that make up the drill string as shown in this graphic. Drill pipe is a strong but relatively lightweight pipe. Crew members
    attach it to a top drive or Kelly. Drill pipe forms the upper part of the drill string. Usually the drill pipe rotates which also rotates the bit. Each section of
    pipe is called a joint. Crew members screw together or make up several joints and put them in to the hole as the bit drills.

    Continue reading →

    Tagged drill string, Oil Field Knowledge, oil field VDO

    Why Does Drillstring Fail? Basic Understanding of Drill String Failure


    By DrillingFormulas.Com | December 1, 2013 - 7:00 am |Drill String 4 Comments

    In drilling industry, it is common that drill string will fail while drilling. Two main factors causing drillstring failure are stresses and corrosion.

    Stress Affects on Drillstring


    Drillstring is exposed to the following stresses:

    Tension – Suspended weight of drillstring sometimes can be several thousand pounds. Additionally, overpull weight while pulling out can be over drill
    string limit resulting failure (see Figure 1).

    Figure 1 – Drillstring in Tensile

    www.drillingformulas.com/category/drill-string/ 4/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    Continue reading →

    Tagged Drill Pipe, drill string, drillstring, faliure

    1 2

    Categories

    Drill String (6)

    Get Drilling Formulas Sheet For Free

    Subscribe to Get Free Calculation Sheet

    email address

    Click Here

    Search on Drillingformulas.com

    Search

    Custom Search

    Well Control One Page

    Drillingformulas.com on Facebook

    www.drillingformulas.com/category/drill-string/ 5/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    Drillingformulas.…
    344 K mentions J’aime

    J’aime cette Page

    2 amis aiment ça

    OilfieldPix.com

    Oilfield Acronyms

    Recent Comments

    DrillingFormulas.Com on Effect of Frictional Pressure on ECD while Forward Circulation

    DrillingFormulas.Com on Effect of Frictional Pressure on ECD while Forward Circulation

    DrillingFormulas.Com on What are differences between Full Opening Safety Valve (TIW valve) and Inside BOP valve (Gray Valve)?

    AKHI on Effect of Frictional Pressure on ECD while Forward Circulation

    Gary Holmes on Calculate Annular Capacity

    www.drillingformulas.com/category/drill-string/ 6/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    www.drillingformulas.com/category/drill-string/ 7/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    www.drillingformulas.com/category/drill-string/ 8/9
    09/05/2020 Drill String Archives - Drilling Formulas and Drilling Calculations

    Drilling Formulas and Drilling Calculations | Powered by Mantra & WordPress.

    www.drillingformulas.com/category/drill-string/ 9/9

    You might also like