Counterbalance, Vented Guided Poppet Type, Counterclockwise Adjustment Sun Cavity Interchange, T-11A
Counterbalance, Vented Guided Poppet Type, Counterclockwise Adjustment Sun Cavity Interchange, T-11A
Counterbalance, Vented Guided Poppet Type, Counterclockwise Adjustment Sun Cavity Interchange, T-11A
Technical data
Max. operating pressure 280 bar (4000 psi)
Max. flow 60 l/min (16 gpm)
Max. internal leakage1) 5 drops/min.
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 40 - 50 Nm (30 -37 ft-lbs)
Weight 0.19 kg (0.42 lbs)
Cavity SUN T-11A
Lines bodies and standard Please refer to section “Hydraulic
assemblies integrated circuit” or consult factory
Seal kit2) Code: RG08U9020110100
Description material no: R901193388
When pressure at 2 rises above the spring bias pressure, Fluids Mineral-based or synthetics with
the check seat is pushed away from the piston and flow is lubricating properties
allowed from 2 to 1. When load pressure at 1 rises above the at viscosities of 10 to 500 mm2/s (cSt)
pressure setting (turn counterclockwise to increase setting Recommended degree of Nominal value max. 10µm (NAS 8) /
- turn clockwise to decrease setting), the direct-acting, fluid contamination ISO 4406 19/17/14
relief function is activated and flow is relieved from 1 to 2. Installation position No restrictions
With pilot pressure at 3, the pressure setting is reduced in
Other Technical Data See data sheet 18350-50
proportion to the stated ratio of the valve, until fully open
Pressure setting: at least 1.3 times the load induced pressure.
with free-flow from 1 to 2. The spring chamber is vented to
atmosphere allowing operation of all functions independent 1) At 70% of pressure setting
Only external seals for 10 valves
of back-pressure at 2. 2)
Characteristic curve
Pressure Δp
Flow Q
Series 0/A to L
unchanged performances and dimensions
SPRINGS
Pilot ratio Std. setting
Adj. press. range Pressure increase
bar (psi)
bar (psi) bar/turn (psi/turn)
03 3:1 cracking pressure
15 25-175 (350-2500) 70 (1015) 175 (2500)
Preferred types
Type Material number Type Material number
045929032015000 R930006129
045929032020000 R930006130
Dimensions
Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
compact-hydraulics-cv@boschrexroth.com obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.