PN LTC 1055-3.1 DEFISRUS 11.09.

2007 9:31 Uhr Seite 1

C M Y CM MY CY CMY K

Electric/electronic PLC crane control with test system Compact crane LTC 1055-3.1
• Control of the winches, slewing gear as well as luffing and • Slewing gear invertible from released to locked Product advantages
telescoping motions by the LICCON computer system as a standard feature
(PLC control) • Four working motions can be performed independent
• Electric load-sensing, open oil circuits with capacity control
for luffing and telescoping
from one another
• Speeds for hoisting/lowering, luffing and slewing
max. load capacity: 55 t
• Hoist gears within closed oil circuit are preselectable max. height under hook: 50 m
• Very short response rates at the initiation of crane motions
max. radius: 46 m

single-stage
telescoping ram control block
with hydraulic
interlocking Liebherr Liebherr
device hoist winch I hoist winch II
slewing gear

luffing ram

control block

pump distribution gear

control levers

LICCON
monitor
cooling
hydraulic

sensors LICCON
control
cooling
transmitters Diesel engine Liebherr Diesel engine
engine control

twin hydraulic
motor

steering

axle 1 axle axle 2 axle 3

gear

Optional features contribute to an expansion of the application spectrum

and increase comfort and safety
On the carrier • Xenon working projector on base section, electrically
• Supporting pressure indication on the carrier and in the adjustable
crane operator’s cab • Twist absorber
• Stow-away box for underlay timber • Tele-diagnostic with installed GSM module
• Trailer coupling D12/D19 • Radio set with CD player
• Transport attachment for the intermediate sections of the • Emergency actuation
swing-away jib • Anemometer
• Navigation system
On the crane superstructure • Reversing camera
• 2nd hoist gear
• Seat heating Further optional features by request
• Work area limitation
• Aircraft warning light

Subject to modifications. PN 143.01.E09.2007

Liebherr-Werk Ehingen GmbH

Postfach 1361, 89582 Ehingen, Germany
콯 +49 7391 5 02-0, Fax +49 7391 5 02-33 99
www.liebherr.com, E-Mail: info.lwe@liebherr.com

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 2
C M Y CM MY CY CMY K

Very compact and maneuverable Special and indoor jobs • Gain of height under hook and radius by the erection jib of
7860 are its strong points 1,2 m incorporated into the swing-away jib, optionally
hydraulically inclinable at 0° - 60° under full load
• Overall length 8,38 m • High telescopable loads of up to 27.5 t due to the specific
Carrier 7,06 m

3300 +/-100
• Outstanding compactness and maneuverability dimensioning of the telescoping ram and the length
Carrier width 2,54 m • Sensitive maneuvering due to hydrostatic displacement drive dependent controlled hydraulic pressure
• Smallest turning radius by active rear-axle steering, • Short basic boom for small constrained radii at low hall heights
6,15 m over carrier, 6,45 m over telescopic boom
21°19° • Minimum clearance height 3,2 m
• Overhang angle front up to 21°, rear up to 20°
13° 14° 20° • Total weight 36 t, equal axle load distribution (12 t) through
14.06 R25 12 t 12 t 12 t hydropneumatic suspension "Niveaumatik“
1005 • 12 t axle load incl. 4,4 t counterweight and biparted
7057
7377 swing-away jib
8382

6265

R = 3590
2540
4500
6260

R = 3350

R=
615
R= 0
645
R

R= 0 R= R=
615
=2

690 520 0
0 0
35

R
=
0

500

23
R = 6450

50

P2

2 LTC 1055-3.1 LTC 1055-3.1 11

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 3
C M Y CM MY CY CMY K

Lifting loads – precise and safe Variable steering concept with P1

"active rear-axle steering"
• 7-section, 7,9 m - 36 m long telescopic boom and 2-section,
4,5 m – 7,8 m long biparted swing-away jib for 43 m height Axles 2 and 3 are set up as "active rear-axle steering“,
under hook and 40 m radius 5 steering methods are preselectable by fixed programs (P)
• Three intermediate sections 2,4 m each for the extension of
the swing-away jib to 15 m, max. height under hook 50 m, P1: On-road steering
self-erection, transportable on the carrier rear Axle1 is steered mechanically with hydraulic assistance with
the steering wheel. Axle 3 is steered actively speed-dependent P2
according to the cramp of the front axle, and set and locked
to straight displacement at a speed over 25 km/h. The change
of the steering angle according to the speed results in a precise
and stable driving quality at increased speeds, the tyre abrasion
is reduced and the maneuverability clearly improved

P2: All-wheel steering

Axles 2 and 3, dependent on the steering angle of the 1st axle
are cramped by the steering wheel so that the smallest turning P3
radii can be performed

P3: Crab steering

60 m Axles 2 and 3 are cramped conveniently by the steering wheel
in the same sense as axle 1

P4: Steering without swerving out

Axles 2 and 3 are steered according to the cramp of the 1st
axle to prevent a swerve out of the carrier rear
K 15 m 20° P4
40°
P5: Independent rear-axle steering
Axle 1 is controlled by the steering wheel, axles 2 and 3 are
steered by the left control lever, independent of the cramp of
50 m the 1st
60°
• A failure in the rear-axle steering would render it ineffective
and the rear-axle is set to straight displacement by the
centering rams
• Two independent hydraulic circuits with wheel- and engine- P5
driven hydraulic pump ensure maximum safety
• Two self-contained control processors
(by existing E/A modules) and diversified sensoriel system
40 m • The entire know-how of the "active rear-axle steering"
36 m by Liebherr

33.7 m

31.3 m • Telescopic boom with rounded, oviform bottom shell, thus

high lateral stability
29 m • Optimal exploitation of the telescopic boom due to a multitude
of telescoping variants
26.6 m 30 m • Swing-away jib mountable at 0°, 20°, 40° and 60°, 2 hydraulic
rams for the continuous variation of the swing-away jib from
0° - 60° (optional)
24.3 m

21.9 m

19.6 m

17.2 m 20 m
14.9 m oviform boom profile

12.6 m

10.2 m
• Luffing under load (interpolation of the load capacities)
7.9 m • Erection jib of 1,2 m integrated into the swing-away jib,
10 m mountable at 0°, 20°, 40° and 60° inclination, hydraulic ram
for the continuous variation of the erection jib from 0° - 60°
• Pulley set/hook for erection jib, 3 rope pulleys for a max.
81° load capacity of 26 t, single hook for max. 26 t load capacity
• Easy and quick re-reeving of the hoist rope by rope dead
end connection
• Load hook with rope dead end connection, cylindrical
shape of the load hook for easy displacement by rolling
on the ground P5
0m

10 LTC 1055-3.1 LTC 1055-3.1 3

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 4
C M Y CM MY CY CMY K

Hydrostatic displacement drive Mounting of 4,4 t

counterweight
• Engine on the superstructure for maximal weight exploitation,
(12 t axle load)
the engine serves for counterweight • Slew superstructure with the fix-mounted counterweight
• Powerful, 6-cylinder Liebherr turbo-charged Diesel engine (2,5 t) and pick up the counterweight deposited on the carrier
type D846 A7, 350 kW/476 h.p, exhaust emissions acc. to front (1,9 t) (fig. 1 – 6)
97/68/EG stage 3 and EPA/CARB Tier 3, robust and reliable, • Counterweigt radius just 3,35 m
modern electronic engine management
• Stepless hydrostatic displacement drive; 3 axial-piston
variable displacement pumps, one pump per axle are driven
by a 3-shaft pump distribution gear within a closed oil circuit;
control by a modern electronic engine/pump/hydraulic
motors management
• Permanent all-wheel drive; no restraint between the axles
due to the elasticity of the hydraulic drive, thus reduced 1 2
tyre abrasion
• Activatable off-road ratio to increase the traction force
• Continuous speed range from 0 – 75 km/h without interruption
of the traction force
• Sensitive maneuvering
• Abrasion-proof brakes with hydraulic retarder
• Tempomat, braking automatic, ABV (anti-lock device) and
ASR (anti-skidding control)
• All axles are steered and driven hydrostatically by hydraulic,
swivelling twin motors, differential locks for transverse locking,
2-step axle intermediate gear for on-road and off-road speed
• All axles with hydropneumatic suspension and
lockable hydraulically
• Maintenance-free suspension rams, not exposed to lateral
forces, piston rod protected against damage by plastic pipe

3 4 5 6

Mounting of 10,4 t
counterweight
(6 t additional counterweight)
• Attach additional counterweight 2,5 t to the counterweight
Planetary axle
plate 1,9 t , put on additional counterweight 3,5 t and pick
it up with the fix-mounted counterweight (2,5 t) of the
Double
superstructure (fig. 1 – 6)
1 hydraulic • Counterweight radius just 3,59 m
motor

Hydraulic 1 2 3
Diesel
pumps engine

1 2

Double
2 hydraulic
motor

Planetary axle

Double
3 hydraulic
motor

Planetary axle

3 4 5 6

4 LTC 1055-3.1 LTC 1055-3.1 9

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 5
C M Y CM MY CY CMY K

LICCON configuration, operating Setting crane on outriggers –

and displacement program quick, convenient and safe
• Variable supporting basis 600
• Standard application programs: Safe load indicator (LMB), Outriggers retracted
configuration program with configuration picture, operating Supporting basis 6,26 m x 6,26 m
program with operation picture, telescoping program with Supporting basis 4,5 m x 6,26 m
telescoping picture, control parameter program, test system; • Fix-mounted supporting pads with splash guard
optional features such as work area limitation and the • Travel of supporting ram of up to 600 mm
LICCON work planner • Level control of the outriggers, all-automatic levelling
• Setting of the configuration by convenient interactive functions of the crane during the supporting procedure by
• Safe and clear acknowledgement of the adjusted "push-button control"
configuration • 2 x 7° lateral inclination of the carrier and crane superstructure
• Representation of all essential data by grahic symbols on • Control panels on either side of the carrier, with membrane
the operation picture keyboard, electronic inclination indicator, push-buttons for
• Integrated wind force control (optional) ENGINE/START/STOP and speed control are illuminated
• Supporting force display (optional) and lockable
• Reliable cut-off device when exceeding the admissible • Control of the outrigger system even from the crane cab is
load moments a standard feature
• Load capacity values for any boom intermediate length • Operation of the outrigger system in accordance with the
• Winch indications for precise lifting/lowering of the load rules for the prevention of accidents
• Standardised digital displays for the displacement • Illumination of the supporting area by 4 incorporated projectors
mode such as speed, lighting, engine temperature,
reservoir contents

Displacement of the crane

with load
• Telescopic boom length up to 12,6 m, radius up to 9 m,
load capacity up to 24,5 t
• Axle lock (locking of the suspension) can be controlled
from the crane cab
• Sensitive displacement through
hydrostatic displacement drive
• Loads displaceable over rear or 360°
LICCON-assisted • Loads can be deposited on the carrier
telescoping system
• Telescoping by single-stage hydraulic ram with hydraulic
driving tenons (patented internal interlocking system)
• Telescoping procedure controllable by convenient operator’s
guide on the monitor, precise approach of the interlocking
positions
• Telescopable loads are displayed on the
LICCON operation picture
• Rapid-cycle telescoping system with "automatic mode", i.e.
all-automatic telescoping to the required boom length
• Very compact and light-weight telescoping system, thus
increased load capacities, especially with long booms and
large radii
• Automatic cushioning in end positions during boom extension
and retraction for the preservation of the structural members

8 LTC 1055-3.1 LTC 1055-3.1 5

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 6
C M Y CM MY CY CMY K

Comfortable carrier Colour monitor

and crane cab for displacement and crane mode

• Crane cab in corrosion-resistant galvanized sheet steel • Optimal incorporation of the colour monitor into the instrument
version, powder-coated, with sound and heat absorbing support; no obstruction of the operator’s view
internal panelling, interior of modern design, tinted windows, • Display of all essential operating data for the displacement
front knock-out window with large windscreen whiper with and the crane mode on the LICCON screen
intermittent whipe/wash device, skylight with large parallel • Usual convenient control by function keys and membrane
whiper and and whipe/wash device, roller blind on front keyboard
window and skylight
• Greenish tinted front and side windows for heat absorption
• Pneumatically lateral extendable footboard for safe get
off/access to the carrier
• 1 working projector of 70 Watt at the cabin front
• Pneumatically suspended crane operator’s seat with
pneumatic lumber support, headrest and incorporated
3-point safety belt
• Operator-friendly armrest-incorporated controls, vertically
and horizontally adjustable control lever consoles and Touch displays for the selection
armrests, ergonomically adjustable operating consoles of operating functions
• Ergonomic control levers with integrated winch rotation and
slewing gear signalling device • The touch displays are incorporated into the armrests
• Additional heater with engine preheating • The programs are preselected by function keys and controlled
• Automatic air-conditioning system by the touch function
• Cab mounted on 4 guide rods and 2 shock absorbers with • The right touch display serves for the control of the programs
incorporated suspension such as on-road displacement, displacement incl. crane
• Front-mounted swinging door for convenient access to the operation, steering programs, outrigger system and
cab; additional swinging door, rear-mounted for access to suspension/Niveaumatik
the stow-away compartment or to the electric components • The left touch display serves for the control of the programs
respectively such as ballasting, working projectors, heating and automatic
air-conditioning system
• Working projector: Manual, automatic load tracking or position
control, i.e. the projector remains fixed on the preselected
point in spite of raising of lowering of the telescopic boom
On-road displacement Displacement with crane operation

Steering programs Control of outrigger system

Suspension Ballasting

Working projectors Heater, automatic air-conditioning

6 LTC 1055-3.1 LTC 1055-3.1 7

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 6
C M Y CM MY CY CMY K

Comfortable carrier Colour monitor

and crane cab for displacement and crane mode

• Crane cab in corrosion-resistant galvanized sheet steel • Optimal incorporation of the colour monitor into the instrument
version, powder-coated, with sound and heat absorbing support; no obstruction of the operator’s view
internal panelling, interior of modern design, tinted windows, • Display of all essential operating data for the displacement
front knock-out window with large windscreen whiper with and the crane mode on the LICCON screen
intermittent whipe/wash device, skylight with large parallel • Usual convenient control by function keys and membrane
whiper and and whipe/wash device, roller blind on front keyboard
window and skylight
• Greenish tinted front and side windows for heat absorption
• Pneumatically lateral extendable footboard for safe get
off/access to the carrier
• 1 working projector of 70 Watt at the cabin front
• Pneumatically suspended crane operator’s seat with
pneumatic lumber support, headrest and incorporated
3-point safety belt
• Operator-friendly armrest-incorporated controls, vertically
and horizontally adjustable control lever consoles and Touch displays for the selection
armrests, ergonomically adjustable operating consoles of operating functions
• Ergonomic control levers with integrated winch rotation and
slewing gear signalling device • The touch displays are incorporated into the armrests
• Additional heater with engine preheating • The programs are preselected by function keys and controlled
• Automatic air-conditioning system by the touch function
• Cab mounted on 4 guide rods and 2 shock absorbers with • The right touch display serves for the control of the programs
incorporated suspension such as on-road displacement, displacement incl. crane
• Front-mounted swinging door for convenient access to the operation, steering programs, outrigger system and
cab; additional swinging door, rear-mounted for access to suspension/Niveaumatik
the stow-away compartment or to the electric components • The left touch display serves for the control of the programs
respectively such as ballasting, working projectors, heating and automatic
air-conditioning system
• Working projector: Manual, automatic load tracking or position
control, i.e. the projector remains fixed on the preselected
point in spite of raising of lowering of the telescopic boom
On-road displacement Displacement with crane operation

Steering programs Control of outrigger system

Suspension Ballasting

Working projectors Heater, automatic air-conditioning

6 LTC 1055-3.1 LTC 1055-3.1 7

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 5
C M Y CM MY CY CMY K

LICCON configuration, operating Setting crane on outriggers –

and displacement program quick, convenient and safe
• Variable supporting basis 600
• Standard application programs: Safe load indicator (LMB), Outriggers retracted
configuration program with configuration picture, operating Supporting basis 6,26 m x 6,26 m
program with operation picture, telescoping program with Supporting basis 4,5 m x 6,26 m
telescoping picture, control parameter program, test system; • Fix-mounted supporting pads with splash guard
optional features such as work area limitation and the • Travel of supporting ram of up to 600 mm
LICCON work planner • Level control of the outriggers, all-automatic levelling
• Setting of the configuration by convenient interactive functions of the crane during the supporting procedure by
• Safe and clear acknowledgement of the adjusted "push-button control"
configuration • 2 x 7° lateral inclination of the carrier and crane superstructure
• Representation of all essential data by grahic symbols on • Control panels on either side of the carrier, with membrane
the operation picture keyboard, electronic inclination indicator, push-buttons for
• Integrated wind force control (optional) ENGINE/START/STOP and speed control are illuminated
• Supporting force display (optional) and lockable
• Reliable cut-off device when exceeding the admissible • Control of the outrigger system even from the crane cab is
load moments a standard feature
• Load capacity values for any boom intermediate length • Operation of the outrigger system in accordance with the
• Winch indications for precise lifting/lowering of the load rules for the prevention of accidents
• Standardised digital displays for the displacement • Illumination of the supporting area by 4 incorporated projectors
mode such as speed, lighting, engine temperature,
reservoir contents

Displacement of the crane

with load
• Telescopic boom length up to 12,6 m, radius up to 9 m,
load capacity up to 24,5 t
• Axle lock (locking of the suspension) can be controlled
from the crane cab
• Sensitive displacement through
hydrostatic displacement drive
• Loads displaceable over rear or 360°
LICCON-assisted • Loads can be deposited on the carrier
telescoping system
• Telescoping by single-stage hydraulic ram with hydraulic
driving tenons (patented internal interlocking system)
• Telescoping procedure controllable by convenient operator’s
guide on the monitor, precise approach of the interlocking
positions
• Telescopable loads are displayed on the
LICCON operation picture
• Rapid-cycle telescoping system with "automatic mode", i.e.
all-automatic telescoping to the required boom length
• Very compact and light-weight telescoping system, thus
increased load capacities, especially with long booms and
large radii
• Automatic cushioning in end positions during boom extension
and retraction for the preservation of the structural members

8 LTC 1055-3.1 LTC 1055-3.1 5

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 4
C M Y CM MY CY CMY K

Hydrostatic displacement drive Mounting of 4,4 t

counterweight
• Engine on the superstructure for maximal weight exploitation,
(12 t axle load)
the engine serves for counterweight • Slew superstructure with the fix-mounted counterweight
• Powerful, 6-cylinder Liebherr turbo-charged Diesel engine (2,5 t) and pick up the counterweight deposited on the carrier
type D846 A7, 350 kW/476 h.p, exhaust emissions acc. to front (1,9 t) (fig. 1 – 6)
97/68/EG stage 3 and EPA/CARB Tier 3, robust and reliable, • Counterweigt radius just 3,35 m
modern electronic engine management
• Stepless hydrostatic displacement drive; 3 axial-piston
variable displacement pumps, one pump per axle are driven
by a 3-shaft pump distribution gear within a closed oil circuit;
control by a modern electronic engine/pump/hydraulic
motors management
• Permanent all-wheel drive; no restraint between the axles
due to the elasticity of the hydraulic drive, thus reduced 1 2
tyre abrasion
• Activatable off-road ratio to increase the traction force
• Continuous speed range from 0 – 75 km/h without interruption
of the traction force
• Sensitive maneuvering
• Abrasion-proof brakes with hydraulic retarder
• Tempomat, braking automatic, ABV (anti-lock device) and
ASR (anti-skidding control)
• All axles are steered and driven hydrostatically by hydraulic,
swivelling twin motors, differential locks for transverse locking,
2-step axle intermediate gear for on-road and off-road speed
• All axles with hydropneumatic suspension and
lockable hydraulically
• Maintenance-free suspension rams, not exposed to lateral
forces, piston rod protected against damage by plastic pipe

3 4 5 6

Mounting of 10,4 t
counterweight
(6 t additional counterweight)
• Attach additional counterweight 2,5 t to the counterweight
Planetary axle
plate 1,9 t , put on additional counterweight 3,5 t and pick
it up with the fix-mounted counterweight (2,5 t) of the
Double
superstructure (fig. 1 – 6)
1 hydraulic • Counterweight radius just 3,59 m
motor

Hydraulic 1 2 3
Diesel
pumps engine

1 2

Double
2 hydraulic
motor

Planetary axle

Double
3 hydraulic
motor

Planetary axle

3 4 5 6

4 LTC 1055-3.1 LTC 1055-3.1 9

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 3
C M Y CM MY CY CMY K

Lifting loads – precise and safe Variable steering concept with P1

"active rear-axle steering"
• 7-section, 7,9 m - 36 m long telescopic boom and 2-section,
4,5 m – 7,8 m long biparted swing-away jib for 43 m height Axles 2 and 3 are set up as "active rear-axle steering“,
under hook and 40 m radius 5 steering methods are preselectable by fixed programs (P)
• Three intermediate sections 2,4 m each for the extension of
the swing-away jib to 15 m, max. height under hook 50 m, P1: On-road steering
self-erection, transportable on the carrier rear Axle1 is steered mechanically with hydraulic assistance with
the steering wheel. Axle 3 is steered actively speed-dependent P2
according to the cramp of the front axle, and set and locked
to straight displacement at a speed over 25 km/h. The change
of the steering angle according to the speed results in a precise
and stable driving quality at increased speeds, the tyre abrasion
is reduced and the maneuverability clearly improved

P2: All-wheel steering

Axles 2 and 3, dependent on the steering angle of the 1st axle
are cramped by the steering wheel so that the smallest turning P3
radii can be performed

P3: Crab steering

60 m Axles 2 and 3 are cramped conveniently by the steering wheel
in the same sense as axle 1

P4: Steering without swerving out

Axles 2 and 3 are steered according to the cramp of the 1st
axle to prevent a swerve out of the carrier rear
K 15 m 20° P4
40°
P5: Independent rear-axle steering
Axle 1 is controlled by the steering wheel, axles 2 and 3 are
steered by the left control lever, independent of the cramp of
50 m the 1st
60°
• A failure in the rear-axle steering would render it ineffective
and the rear-axle is set to straight displacement by the
centering rams
• Two independent hydraulic circuits with wheel- and engine- P5
driven hydraulic pump ensure maximum safety
• Two self-contained control processors
(by existing E/A modules) and diversified sensoriel system
40 m • The entire know-how of the "active rear-axle steering"
36 m by Liebherr

33.7 m

31.3 m • Telescopic boom with rounded, oviform bottom shell, thus

high lateral stability
29 m • Optimal exploitation of the telescopic boom due to a multitude
of telescoping variants
26.6 m 30 m • Swing-away jib mountable at 0°, 20°, 40° and 60°, 2 hydraulic
rams for the continuous variation of the swing-away jib from
0° - 60° (optional)
24.3 m

21.9 m

19.6 m

17.2 m 20 m
14.9 m oviform boom profile

12.6 m

10.2 m
• Luffing under load (interpolation of the load capacities)
7.9 m • Erection jib of 1,2 m integrated into the swing-away jib,
10 m mountable at 0°, 20°, 40° and 60° inclination, hydraulic ram
for the continuous variation of the erection jib from 0° - 60°
• Pulley set/hook for erection jib, 3 rope pulleys for a max.
81° load capacity of 26 t, single hook for max. 26 t load capacity
• Easy and quick re-reeving of the hoist rope by rope dead
end connection
• Load hook with rope dead end connection, cylindrical
shape of the load hook for easy displacement by rolling
on the ground P5
0m

10 LTC 1055-3.1 LTC 1055-3.1 3

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 2
C M Y CM MY CY CMY K

Very compact and maneuverable Special and indoor jobs • Gain of height under hook and radius by the erection jib of
7860 are its strong points 1,2 m incorporated into the swing-away jib, optionally
hydraulically inclinable at 0° - 60° under full load
• Overall length 8,38 m • High telescopable loads of up to 27.5 t due to the specific
Carrier 7,06 m

3300 +/-100
• Outstanding compactness and maneuverability dimensioning of the telescoping ram and the length
Carrier width 2,54 m • Sensitive maneuvering due to hydrostatic displacement drive dependent controlled hydraulic pressure
• Smallest turning radius by active rear-axle steering, • Short basic boom for small constrained radii at low hall heights
6,15 m over carrier, 6,45 m over telescopic boom
21°19° • Minimum clearance height 3,2 m
• Overhang angle front up to 21°, rear up to 20°
13° 14° 20° • Total weight 36 t, equal axle load distribution (12 t) through
14.06 R25 12 t 12 t 12 t hydropneumatic suspension "Niveaumatik“
1005 • 12 t axle load incl. 4,4 t counterweight and biparted
7057
7377 swing-away jib
8382

6265

R = 3590
2540
4500
6260

R = 3350

R=
615
R= 0
645
R

R= 0 R= R=
615
=2

690 520 0
0 0
35

R
=
0

500

23
R = 6450

50

P2

2 LTC 1055-3.1 LTC 1055-3.1 11

Probedruck
PN LTC 1055-3.1 DEFISRUS 11.09.2007 9:31 Uhr Seite 1
C M Y CM MY CY CMY K

Electric/electronic PLC crane control with test system Compact crane LTC 1055-3.1
• Control of the winches, slewing gear as well as luffing and • Slewing gear invertible from released to locked Product advantages
telescoping motions by the LICCON computer system as a standard feature
(PLC control) • Four working motions can be performed independent
• Electric load-sensing, open oil circuits with capacity control
for luffing and telescoping
from one another
• Speeds for hoisting/lowering, luffing and slewing
max. load capacity: 55 t
• Hoist gears within closed oil circuit are preselectable max. height under hook: 50 m
• Very short response rates at the initiation of crane motions
max. radius: 46 m

single-stage
telescoping ram control block
with hydraulic
interlocking Liebherr Liebherr
device hoist winch I hoist winch II
slewing gear

luffing ram

control block

pump distribution gear

control levers

LICCON
monitor
cooling
hydraulic

sensors LICCON
control
cooling
transmitters Diesel engine Liebherr Diesel engine
engine control

twin hydraulic
motor

steering

axle 1 axle axle 2 axle 3

gear

Optional features contribute to an expansion of the application spectrum

and increase comfort and safety
On the carrier • Xenon working projector on base section, electrically
• Supporting pressure indication on the carrier and in the adjustable
crane operator’s cab • Twist absorber
• Stow-away box for underlay timber • Tele-diagnostic with installed GSM module
• Trailer coupling D12/D19 • Radio set with CD player
• Transport attachment for the intermediate sections of the • Emergency actuation
swing-away jib • Anemometer
• Navigation system
On the crane superstructure • Reversing camera
• 2nd hoist gear
• Seat heating Further optional features by request
• Work area limitation
• Aircraft warning light

Subject to modifications. PN 143.01.E09.2007

Liebherr-Werk Ehingen GmbH

Postfach 1361, 89582 Ehingen, Germany
콯 +49 7391 5 02-0, Fax +49 7391 5 02-33 99
www.liebherr.com, E-Mail: info.lwe@liebherr.com

Probedruck