ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

ILNAS-EN ISO 16136:2006

Industrial valves - Butterfly valves of

thermoplastics materials (ISO
16136:2006)

Robinetterie industrielle - Robinets à

papillon en matériaux thermoplastiques
(ISO 16136:2006)

Industriearmaturen - Klappen aus

Thermoplasten (ISO 16136:2006)

03/2006
 ILNAS-EN ISO 16136:2006

National Foreword

This European Standard EN ISO 16136:2006 was adopted as Luxembourgish Standard

ILNAS-EN ISO 16136:2006.

Every interested party, which is member of an organization based in Luxembourg, can

participate for FREE in the development of Luxembourgish (ILNAS), European (CEN,
CENELEC) and International (ISO, IEC) standards:

- Participate in the design of standards

- Foresee future developments
- Participate in technical committee meetings
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

https://portail-qualite.public.lu/fr/normes-normalisation/participer-normalisation.html

THIS PUBLICATION IS COPYRIGHT PROTECTED

Nothing from this publication may be reproduced or utilized in
any form or by any mean - electronic, mechanical, photocopying
or any other data carries without prior permission!
 ILNAS-EN ISO 16136:2006
EUROPEAN STANDARD EN ISO 16136
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2006

ICS 23.060.99

English Version

Industrial valves - Butterfly valves of thermoplastics materials

(ISO 16136:2006)

Robinetterie industrielle - Robinets à papillon en matériaux Industriearmaturen - Klappen aus Thermoplasten (ISO
thermoplastiques (ISO 16136:2006) 16136:2006)
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

This European Standard was approved by CEN on 3 March 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16136:2006: E
worldwide for CEN national Members.
 ILNAS-EN ISO 16136:2006
EN ISO 16136:2006 (E)

Foreword

This document (EN ISO 16136:2006) has been prepared by Technical Committee CEN/TC 69
"Industrial valves", the secretariat of which is held by AFNOR, in collaboration with Technical
Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".

This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2006, and conflicting national
standards shall be withdrawn at the latest by September 2006.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

2
 ILNAS-EN ISO 16136:2006
EN ISO 16136:2006 (E)

ANNEX ZA
(informative)

Relationship between this International Standard and the Essential

Requirements of EU Directive 97/23 EC (PED)
This International Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide one means of conforming to
Essential Requirements of the New Approach Directive 97/23/EC (PED).

Once this standard is cited in the Official Journal of the European Communities under that Directive
and has been implemented as a national standard in at least one Member State, compliance with
the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

standard, a presumption of conformity with the corresponding Essential Requirements of that

Directive and associated EFTA regulations.

Table ZA.1 — Correspondence between this Standard and Directive 97/23/EC (PED)

Sub-clause(s) of this Essential Requirements (ERs) of EU Directive 97/23/EC

International Standard
4.1; 4.3; 5.2 Design for adequate strength 2.2.1
5.2.3 Type test 2.2.2
4.8.1 Wear 2.7
4.7.1 Traceability 3.1.5
8.1 Marking 3.3
4.8.3 Operating instruction 3.4
4.2; 4.3 Materials for pressurized parts 4.1, 4.2 a)

WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.

3
 INTERNATIONAL
ILNAS-EN ISO 16136:2006
ISO
STANDARD 16136

First edition
2006-03-15

Industrial valves — Butterfly valves

ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

of thermoplastics materials
Robinetterie industrielle — Robinets à papillon en matériaux
thermoplastiques

Reference number
ISO 16136:2006(E)

© ISO 2006
 ISO 16136:2006(E) ILNAS-EN ISO 16136:2006

PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

 ILNAS-EN ISO 16136:2006 ISO 16136:2006(E)

Contents Page

Foreword............................................................................................................................................................ iv
1 Scope ..................................................................................................................................................... 1
2 Normative references ........................................................................................................................... 1
3 Terms and definitions........................................................................................................................... 2
4 Requirements ........................................................................................................................................ 4
4.1 Design .................................................................................................................................................... 4
4.2 Materials ................................................................................................................................................ 5
4.3 Pressure/temperature rating................................................................................................................ 5
ILNAS-EN ISO 16136:2006 - Preview only Copy via ILNAS e-Shop

4.4 Dimensions............................................................................................................................................ 7
4.5 Operation ............................................................................................................................................... 7
4.6 Functional characteristics ................................................................................................................... 8
4.7 Manufacture........................................................................................................................................... 8
4.8 Other requirements............................................................................................................................... 9
5 Test procedures .................................................................................................................................... 9
5.1 Documentation of test results ............................................................................................................. 9
5.2 Initial type tests................................................................................................................................... 10
6 Declaration of compliance ................................................................................................................. 11
7 Designation ......................................................................................................................................... 11
8 Marking and preparation for storage and transportation ............................................................... 11
8.1 Marking and documentation .............................................................................................................. 11
8.2 Preparation for storage and transportation ..................................................................................... 12
Annex A (informative) Procurement information .......................................................................................... 13
Bibliography ..................................................................................................................................................... 14

© ISO 2006 – All rights reserved iii