Adper Scotchbond SE: Confidence

Adper Scotchbond SE ™ ™
Self-Etch Adhesive
Confidence from
Start to Finish
Summary of advantages A visibly better self-etch adhesive. Color change indicator visually confirms
• Total-etch performance Take your confidence in self-etch to a whole new level accurate adhesive placement and coverage.
in a self-etch adhesive with Adper Scotchbond SE Self-Etch Adhesive from
3M ESPE. It introduces features you won't find with
• Reduced risk of post- other self-etch adhesives.
operative sensitivity
Radiopacity helps prevent misdiagnosis
• Color-change indicator of secondary caries. Primer (Bottle A) goes on Apply adhesive (Bottle B),
verifies coverage and pink, acting as a guide for and the pink color disappears,
A patented nanotechnology in Adper Scotchbond SE
activation achieving full coverage when indicating where the adhesive
adhesive makes it radiopaque and visible on X-ray in applying the adhesive. is placed, and etchant is
• Radiopaque to reduce risk the event of adhesive pooling. activated. Agitate for 20 sec.
Air dry for 10 sec.
of misdiagnosis of decay Adper™ Scotchbond™ SE
Clearfil® SE
• Patented bonded nanofiller

for optimized bond strength Radiolucent Areas No Radiolucent Areas
• Moisture tolerant – works

on wet or dry enamel Apply hydrophobic overcoat Final restoration.
and air thin. Light cure for
and dentin 10 sec.
In vitro demonstration courtesy of Dr. Jorge Perdigao,
• Good stability – without University of Minnesota.
refrigeration or shaking Cross-sectional view of two Class II restorations. The left side,
bonded with Clearfil SE Bond shows dark lines along the
• Root surface desensitizer composite-adhesive-tooth interfaces. The lines are caused by
pooled radiolucent adhesive, and can be confused with tooth
decay. Adper™ Scotchbond™ SE Self-Etch Adhesive (right) is
radiopaque, so no dark lines are present to be misdiagnosed.
Source: 3M ESPE internal data
Proven bond strengths are on par with total-etch adhesives. Be confident of low nanoleakage.
Adper™ Scotchbond™ SE Self-Etch Adhesive demonstrates bond In a nanoleakage study comparing leading adhesives, Adper™
strengths that are comparable with total-etch adhesives. The Scotchbond™ SE Self-Etch Adhesive was the only bonding agent
patented, bonded nanofiller that gives Adper Scotchbond SE tested that showed no signs of nanoleakage.
adhesive its radiopacity, also helps optimize bond strength. 40
35
Nanoleakage, %
Cut Enamel 30
60
Bond strengths higher Dentin 25
than leading self-etch 20
50 and total etch adhesives
15
40 10
5
MPa
30 0
Adper™ Adper™ Adper™ G-Bond™ Clearfil® S3 Xeno® IV Clearfil™ SE
Scotchbond™ Prompt™ Single Bond Bond Bond
20 SE L-Pop™ Plus
10 No nanoleakage
observed
0
AdheSE® Prime & Syntac® Xeno® III ALL-BOND Adper™ Source: Dr. Perdigao, University of Minnesota
Bond® NT™ SE™ Scotchbond™
SE
Indications:
Shear bond strength to dentin and enamel. Study using shear • Bonding between dentin/enamel and composite filling
methodology compares bond strength of Adper ™ Scotchbond™ SE
Self-Etch Adhesive to that of total-etch and self-etch adhesives. • Bonding between dentin/enamel and compomer filling
Source: 3M ESPE internal data • Intraoral repair of porcelain, composite and metal using
light-cure composite resin
• Desensitization of hypersensitive teeth/root surface
Adper Scotchbond SE adhesive is suited for light-curing materials,
but not for dual-curing or self-curing materials, and is not indicated
for indirect applications, including use in veneer placement.
Ordering Information
Item # Product Information
42000 Adper™ Scotchbond™ SE Self-Etch Adhesive Intro Kit
Kit includes: 5g Part A (Primer) in cylindrical vial w/Purple cap; 5g Part B (Bond) in oblong vial w/Black cap;
50 disposable 2-well dispensing wells; 50 disposable Purple microbrushes; 50 disposable Black microbrushes
42010 Adper™ Scotchbond™ SE Self-Etch Adhesive Refill Part A

5g Part A (Primer) in cylindrical vial w/Purple cap
42020 Adper™ Scotchbond™ SE Self-Etch Adhesive Refill Part B
5g Part A (Bond) in oblong vial w/Black cap
42040 Adper™ Scotchbond™ SE Self-Etch Adhesive Trial Kit
Kit includes: 2.5g Part A (Primer) in cylindrical vial w/Purple cap; 2.5g Part B (Bond) in oblong vial
w/Black cap; 50 disposable 2-well dispensing wells; 50 disposable Purple microbrushes;
50 disposable Black microbrushes
Customer Care Center: 1-800-634-2249 www.3MESPE.com
Dental Products 3M Canada 3M, ESPE, Adper and Scotchbond are

Post Office Box 5757
3M Center trademarks of 3M or 3M ESPE AG. Used
London, Ontario N6A 4T1
Building 275-2SE-03 under license in Canada. AdheSE,
Canada
St. Paul, MN 55144-1000 Please recycle. Printed in U.S.A. ALL-BOND SE, Clearfil, G-Bond, Prime
1-888-363-3685
U.S.A. © 3M 2007. All rights reserved. & Bond NT, Syntac and Xeno are not
1-800-634-2249 70-2009-3979-4 trademarks of 3M.

Adper Scotchbond SE: Confidence

Uploaded by

Copyright:

Available Formats

Adper Scotchbond SE: Confidence

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Adper Scotchbond SE: Confidence

Uploaded by

Copyright:

Available Formats

Adper Scotchbond SE ™ ™

• Patented bonded nanofiller

• Moisture tolerant – works

42010 Adper™ Scotchbond™ SE Self-Etch Adhesive Refill Part A

Customer Care Center: 1-800-634-2249 www.3MESPE.com

Dental Products 3M Canada 3M, ESPE, Adper and Scotchbond are

You might also like