Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
64 views

Curved Beam

This document provides the design of a circular beam with a diameter of 10m and subjected to a uniformly distributed load of 300kN/m. The beam is designed with 8 columns and a concrete grade of 35N/mm^2. Reinforcement details are provided at the support and midspan sections, including 5-25T bars at the support and 4-20T bars at midspan. Shear reinforcement of 12T stirrups at 200mm spacing is also specified. Design calculations are shown for bending moment, shear force, section dimensions and reinforcement sizing.

Uploaded by

Virat Desai
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
64 views

Curved Beam

This document provides the design of a circular beam with a diameter of 10m and subjected to a uniformly distributed load of 300kN/m. The beam is designed with 8 columns and a concrete grade of 35N/mm^2. Reinforcement details are provided at the support and midspan sections, including 5-25T bars at the support and 4-20T bars at midspan. Shear reinforcement of 12T stirrups at 200mm spacing is also specified. Design calculations are shown for bending moment, shear force, section dimensions and reinforcement sizing.

Uploaded by

Virat Desai
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 11

CIRCULAR BEAM

GIVEN DATA
DIAMETER 10 m
UDL 300 kN/m
NO. OF COLUMN 8
CONCRETE GRADE 35 N/mm2
STEEL 415 N/mm2
CONSTANT
K1 0.0083
K2 0.0041
K3 0.0006
WIDTH OF SECTION 500 mm
TM 9.5 KNm
DEPTH 1m
3.14159265358979

SOLUATION

SELF WEIGHT 17.5 KN/m


unit weight 300 KN/m
total 317.5 KN/m
𝑤=2𝜋𝑅𝑊 9974.55667514759 KN

MAX -ve B.M.


K1*W*R 413.944102018625 KN.M

MAX +ve B.M.


K2*W*R 204.478411840526 KN.M

MAX T.M. (T)


K3*W*R 29.9236700254428 KN.M

SHEAR FORCE CALCULATION


Total Load/No of column 1246.81958439345 KN

Sher force at one end (V) 623.409792196725 KN

SFxx=Va-wx 360.19232438033 KN

SECTION DESIGN
cover 25 mm
σcbc 7 N/mm2
σst 230 N/mm2

m= 280/3* σcbc 13.3333333333333

k= mσcbc/(mσcbc+σst) 0.288659793814433

j=1-k/3 0.903780068728522

Q= 0.5*σcbc*k*j 0.913097389024693

d= √M/Qb 0.952198070025146 m
convert into mm 952.198070025146 mm

D=d+cover 977.198070025146 mm
take 1000 mm

Ast=M/σst*j*d 2091.33596733448 mm2


area of one bar=π/4*(dia)^2 490.873852123405 mm2

selection bar dia 25

NO. OF bars=Ast/area of one bar 4.26043464789955


approx no 5

Ast Provided=no of bars*area of one bar 2454.36926061703 mm2

Percentage of steel (pt)=100*Ast provided/b*D 0.490873852123405

τc 0.4752 N/mm2
Vuc=τc*b*d 226.242261437975 KN <V

Vuc<V shear reinforcemrnt is requried

Vus= V-Vuc 397.16753075875 KN

PROVIDING STEEL WITH SPACING

SELECTION OF bar dia 12 mm

considering 2 legged 12mm stirrups

area of one bar= π/4*(dia)^2 113.097335529233 mm2

area of 2 legged stirrups (Asv) 226.194671058465 mm2

check for spacing

1) Sv= 0.87*fy*Asv*d/Vus 195.795758053527 mm

2) I.S. GIVEN VALUE 300 mm

3) least lateral dimension (I.S.) 500 mm

take minimum of above three

so provide 2 legged 12T-200mm c/c

DESIGN OF SECTION FOR MAXIMUM TENSION

equivalent shear (V)=SFxx+1.6(T/b) 455.948068461747 KN

D/b=1000/500 2

equivalent moment=T [ 1+(D/b)/1.7 ] 52.8064765154872 KN.M

Vus=V-τcbd 229.705807023772 KN

PROVIDING STEEL WITH SPACING

SELECTION OF bar dia 12 mm

considering 2 legged 12mm stirrups


area of one bar= π/4*(dia)^2 113.097335529233 mm2

area of 2 legged stirrups (Asv) 226.194671058465 mm2

check for spacing

1) Sv= 0.87*fy*Asv*d/Vus 338.536142236532 mm

2) I.S. GIVEN VALUE 300 mm

3) least lateral dimension (I.S.) 500 mm

so provide 2 legged 12T-300mm c/c

DESIGN FOR MID SECTION

Ast req.= M/σst*j*d 1033.06957422546 mm2

Astmin=0.85*bd/fy 975.142601832981 mm2

provide 4-20T

PROVIDING STEEL WITH no. of bars


20
SELECTION OF bar dia

no. of bars 4 nos

area of one bar= π/4*(dia)^2 314.159265358979 mm2

Ast provided= NO.OF BAR*area of one bar 1256.63706143592 mm2 ˃Ast req.

ok
Reinforcement Details
At Support & Mid Span

5-25T

12T@200c/c
1000mm
4-20T

4-20T

500mm
3.141593

20 250 20
25 415 25
30 500 30
35 35
50 40
DESIGN SHEAR STRENGTH OF CONCREATE (τc, N/MM2)

%pt CONCRETE GRADE


M15 M16 M17 M18 M19 M20 0.545455

1 2 3 4 5 6 7

0.15 0.28 0.28 0.29 0.29 0.29 0.3


0.25 0.35 0.36 0.36 0.37 0.37 0.38
0.5 0.46 0.48 0.49 0.5 0.5 0.51
0.75 0.54 0.56 0.57 0.59 0.59 0.6
1 0.6 0.62 0.64 0.66 0.67 0.68
1.25 0.64 0.67 0.7 0.71 0.73 0.74 0.4556
1.5 0.68 0.72 0.74 0.76 0.78 0.79
1.75 0.71 0.75 0.78 0.8 0.82 0.84
2 0.71 0.79 0.82 0.84 0.86 0.88 0.4752
2.25 0.71 0.81 0.85 0.88 0.9 0.92
2.5 0.71 0.82 0.88 0.91 0.93 0.95
2.75 0.71 0.82 0.9 0.94 0.96 0.98
≥3 0.71 0.82 0.92 0.96 0.99 1.01

INTERPOLATION=0.49 0.4752

0.5 0.48 0.520833


0.25 0.36

0.25 0.12
[(0.5-0.49)*(0.48-0.36)/(0.5-0.25)]+0.48 0.4852
6
8
10
12
16
20
25
0.4752 32
36
40
46
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
5-25T

12T@200c/c

1000mm
4-20T

4-20T

500mm

You might also like