Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 769 views

    Maxfloc - T

    Uploaded by

    Choice Organo
    MAXFLOC-T is a liquid cationic polymer used for potable water clarification and oil-water separation. It is a medium molar mass, high charge density polymer that is readily soluble in water, unaffected by pre-chlorination, and approved for drinking water. MAXFLOC-T can be used to reduce alum consumption, provide faster settling and more filterable flocs, and reduce aluminum and iron carryover in water treatment. It is stored and handled as a non-hazardous, non-toxic liquid.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Maxfloc - T

    Uploaded by

    Choice Organo
    769 views3 pages
    MAXFLOC-T is a liquid cationic polymer used for potable water clarification and oil-water separation. It is a medium molar mass, high charge density polymer that is readily soluble in water, unaffected by pre-chlorination, and approved for drinking water. MAXFLOC-T can be used to reduce alum consumption, provide faster settling and more filterable flocs, and reduce aluminum and iron carryover in water treatment. It is stored and handled as a non-hazardous, non-toxic liquid.

    Original Title

    1. Maxfloc - T (002)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MAXFLOC-T is a liquid cationic polymer used for potable water clarification and oil-water separation. It is a medium molar mass, high charge density polymer that is readily soluble in water, unaffected by pre-chlorination, and approved for drinking water. MAXFLOC-T can be used to reduce alum consumption, provide faster settling and more filterable flocs, and reduce aluminum and iron carryover in water treatment. It is stored and handled as a non-hazardous, non-toxic liquid.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    769 views3 pages

    Maxfloc - T

    Uploaded by

    Choice Organo
    MAXFLOC-T is a liquid cationic polymer used for potable water clarification and oil-water separation. It is a medium molar mass, high charge density polymer that is readily soluble in water, unaffected by pre-chlorination, and approved for drinking water. MAXFLOC-T can be used to reduce alum consumption, provide faster settling and more filterable flocs, and reduce aluminum and iron carryover in water treatment. It is stored and handled as a non-hazardous, non-toxic liquid.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    MAXFLOC-T

    Cationic Polymer

    DESCRIPTION PRODUCT FEATURES


    MAXFLOC–T is a liquid cationic • Liquid Product
    polyelectrolyte. It is a medium • Readily Soluble in Water
    molar mass, high charge • Unaffected by pre-chlorination
    density polymer. MAXFLOC–T • Accepted for use in drinking water
    is non toxic and approved for clarification
    potable water clarification. It is • Low storage cost and low bulk handling
    also effective in oil water cost
    separation. • Eliminates lime usage

    PRODUCT PROPERTIES
    Appearance Clear, yellow viscous liquid

    Solubility Soluble in water in all


    proportions.

    Colour APHA 100 max.

    Viscosity 50 – 150 cps at 25 ° C

    pH 3 to 4

    PRINCIPAL PROPERTIES BENEFITS


    ♦ Industrial pretreatment ♦ Reduction in alum consumption
    ♦ Potable water ♦ Low dose requirement.
    clarification ♦ Faster settling and more
    ♦ Primary coagulation in filterable flocs.
    ETP ♦ Reduces Aluminum and Iron
    ♦ Sludge volume carryover
    compaction ♦ Coagulates colloidal silica
    PREPARATION OF STOCK PLANT FEED CONCENTRATION
    SOLUTION
    For plant purpose 1 % dosing concentration
    For Laboratory Use : of the product is recommended.

    Dissolve 1 ml. Of MAXFLOC – T


    (as supplied) in one liter of FEED SYSTEM
    distilled water, stir well to ensure
    It is recommended to use plastic or rubber
    uniform concentration. This yields
    lined containers equipped with stirrers and
    standard solution. One ml of this
    metering pump.
    standard solution when added to
    one liter of representative sample
    provides 1-ppm concentration of FEED POINT
    MAXFLOC –T.
    Maxfloc-T is added in high turbulence areas
    in the plant to ensure high mixing energy
    and better contact of coagulant with the
    impurities in water.

    PACKING SAFETY, HANDLING AND


    STORAGE
    MAXFLOC – T is supplied in non –
    returnable plastic drums MAXFLOC – T is non–hazardous,non-toxic
    (carboys). of 35 Kgs ,50 Kgs,100 and non-irritating liquid polymer. However
    Kgs. caution must be exercised in storing and
    handling the chemical. Use gloves and
    goggles while handling. In case of eye
    contact, flush with plenty of water. Store in
    shade at ambient temperature and away
    from direct sunlight.

    BOMBAY 400 039 : Dhanraj Mahal, Near Gateway of India, Tel. :


    22045391,2 2045324
    KOLKATTA 700 016 : Azimganj House, 5th floor, 7 Camac Street, Tel. :
    22826711/12/13
    CHENNAI 600 006 : 312, Anna Salai,teynampetTel. : 24353831-4
    NEW DELHI 100 057 : 9 Community Center, Basant Lok, Tel. : 26145319,
    26145326.
    CHEMICAL DIVISION AHMEDABAD 380 006 : 409-411, Mahakant, Opp. VS Hospital, Ashram Road,
    97-E, GENERAL BLOCK, Tel.: 6575408, 6577073
    BHOSARI INDUSTRIAL AREA, PUNE BANGALORE 560 052 : Leemans Complex, 4th Floor, 30/1, Cunningham Road,
    PIN-411026, INDIA Tel.: 2267377, 2265477
    TEL:-0091 (020) 27120181, 27120169 BARODA 390005 : 85/B, Amin Chamber, Productivity Road Tel.: 2332636,
    FAX:-0091(020) 27120206 2314802.
    HYDERABAD 500 482 : 6-3-649, Nalanda Complex, Somajiguda, Tel. :
    23310254, 23312013

    TCD/POLY/MAXFLOC T/11-04
    In view of our constant endeavor to improve quality of our products , we reserve the right to alter or change specifications without prior notice.
    DOSE SELECTION CHART
    ALUM AND MAXFLOC-T COMBINATIONS
    Raw Water Alum dose Alum/ Maxfloc-T combinations
    Turbidity (When used alone)
    Alum Dose Maxfloc-T Dose

    NTU PPM PPM PPM

    5-10 8-10 - 0.05


    15-20 15-20 - 0.08
    25-30 20-22 8 0.12
    35-50 22-28 10 0.13
    50-70 25-30 10-15 0.13
    70-100 30-40 15-18 0.15
    100-120 40-50 18-22 0.18
    120-150 50-60 22-28 0.20
    150-200 60-75 28-35 0.24
    200-225 80-85 35-40 0.28
    225-250 85-95 40-45 0.32
    250-300 95-100 45-55 0.35
    300-350 100-115 55-60 0.38
    350-400 115-120 60-62 0.40
    400-450 120-125 62-65 0.42
    450-500 125-135 65-75 0.45

    Note:- above dose selection chart is indicative and dose combinations may
    vary depending on the nature of source of raw water and nature of
    suspended particles. To arrive at optimum dose combinations, laboratory jar
    test study is necessary.

    You might also like