REPAIR KITS - Service Valves

Quick Reference Guide For Repair Kits

Make sure you are thoroughly trained before you attempt any valve repair or maintenance. Improper
conditions or procedures can cause accidents resulting in property damage and personal injury.

Back Seat On 901, 9101 and 9103 Valves

Valve Stems On 901, 9101
Cylinder and Service Valves
and 9103 Valves
Part Number Kit Number Kit Contents Is metal-to-metal seating to provide added
protection against leakage while the valve is
Bonnet; stem and disc Are machined with a double lead open. Back seat the valve while in operation.
903-50 assembly; large handwheel; thread for quick opening and clos-

O-Rings
901 Series self-tapping screw ing as well as high lift.

Forged Brass Body

903 Series
9106CO Bonnet; stem and disc For positive leak-proof seals under
Pressure Relief
903-51 assembly; small handwheel; temperature and pressure variations.
self-tapping screw
Seat Disc
Provides quick discharge of excess
Bonnet; stem and disc pressure. Relief seat disc is special
19100-50B assembly; small handwheel; resilient composition rubber. Is a tapered nylon in a fully confined seat
self-tapping screw to ensure easy, leak-free, positive shutoffs.
Tapered Seat Openings
9101 Series Seat disc also provides a separate swivel
On 9101 and 9103 Valves
9107K8A Complete MultiBonnet
action to minimize scoring by impurities.
assembly-bonnet assembly;
19104-50 Permit increased flow rates
handwheel; nameplate; self-
tapping screw resulting in faster charging.

3100-81K Bonnet and stem assembly; WARNING: Under normal conditions, the
Conversion gasket (Conversion useful safe service life of a pressure relief
valve is 10 years from the original date of
3100 Series Kit Assembly)
manufacture. However, the safe useful
(Obsolete)
life of the valve may be shortened and
Diaphragm; bonnet and
7100 Series 3100-80A
replacement required in less than 10
stem assembly
(Obsolete)

years depending on the environment in

Diaphragm assembly, back
3100-80B
which the valve lives. Inspection and
seat; washer

maintenance of pressure relief valves is

Bonnet; stem and seat disc
very important. Failure to properly
19100-50B assembly; large handwheel;
inspect and maintain pressure relief
9101P5 self-tapping screw

Cap (907-12) valves could result in personal injuries or

P5H
property damage.
Bonnet; stem and seat disc
for 907 Series
19101-50 assembly; small handwheel;
self-tapping screw Cylinder Valve 3162C-6

Design Features of the MultiBonnet®

Features & Benefits
Handwheel The MultiBonnet® is designed to allow quick and easy repair of bonnet pack-
Aluminum die cast ings in certain Multivalves® and service valves on active propane systems. It

19104-80
handwheel. allows you to repair valve bonnet stem o-ring leaks in minutes, without inter-
rupting gas service to your customers.
• Eliminates the need to evacuate tanks or cylinders to repair the

Non-Rising Stem
MultiBonnet® packing.
• Two section design allows repair of MultiBonnet® assemblies on active
19104-50
Designed to allow easy propane systems without interruption in gas service or shutting off appli-
backseating and ances downstream. This helps to prevent time consuming relighting of pilots,
long service life. special appointments, and call backs.

Upper Packing Assembly

• Cost of replacing the MultiBonnet® packing is only 1/3 as much as replac-
Internal O-ring
ing a complete bonnet assembly—not including time cost savings, which
Contains both internal and external o-rings.
can be substantial.
Provides leak resistant performance.

Lower Bonnet and Stem Assembly

• Available on certain new Multivalves® and service valves as well as repair
assemblies for many existing RegO® valves.
Machined brass construction offers • UL listed as a component of valve assembly.
Here’s How The MultiBonnet® Works
durability to bonnet design.

Nameplate
External O-ring
• When the valve is fully open, only the lower stem will rise and backseat
Provides easy identification against the teflon washer which isolates the upper packing.
of the RegO MultiBonnet .
Machined Double Lead Threads
®
• This allows you to remove the upper packing nut, which contains the o-rings,
and replace it while the valve is fully open and gas service not interrupted.
Provides for quick opening and
Teflon Backseat Q. What valves can you use Multibonnet® on as a replacement?
closing of the valve.

Shut-off Seat Disc

Provides for upper A. Any valve that has the letter “R” suffix designation and the following:
packing isolation when 6532A 6533A 6542A 6543A 7556VR G8475V
Tapered nylon disc is retained in a fully confined
valve is fully open. G8475W 8555D 8593A 9101C 9101D 9300Y
seat that helps ensure positive shut-offs.

Service Valve Repair Kits

Figure
No. Part No. De
escription Fits Valve

1 3100-80A Bonnet RegO 3100 & 7100 Series

2 3100-80B Seat RegO 3100 & 7100 Series

Conversion assembly. Converts 3100-80A from

3 3100-81K
diaphragm to "O" Ring Seal.
1 2 3 4 5
4 8100-50 Bonnet RegO 8100 Series

5 19101-50 Bonnet RegO 9100 Series Forklift

6 19104-50 Bonnet RegO 9100 Series

7 19104-80 Packing for 19104-50 multibonnet

8 19100-50B Bonnet RegO 9100 Series

9 903-50 Bonnet RegO 900 Series

Old style 2400 & 2500 series

10 7128-5 Dia. Assy
multivalve

6 7 8 9 10

SINCE 1937
Atlanta GA Dallas TX Fayetteville NC Houston TX Indianapolis IN
(800) 241-4155 (800) 821-1829 (800) 447-1625 (800) 334-7816 (800) 241-1971
Kansas City MO Little Rock AR Orlando FL Richmond VA St. Louis MO
(800) 821-5062 (800) 643-8222 (800) 821-0631 (800) 368-4013 (800) 423-4685
www.gasequipment.com Gas Equipment Co. TV / www.youtube.com/GasEquipmentTV
P10 CEDed0513