Hawke Cable Glands

Cable Glands 73
for Global Connection

Solutions
Contents Hazardous Area
74 Cable Glands
PAGE DESCRIPTION
76-77 Selection Chart
78 Introduction
79 Hazardous Area Cable Glands - Group II
80
81
contents
Hazardous Area Cable Gland Features
Hazardous Area Cable Gland Type: 501/421
82 Hazardous Area Cable Gland Type: 501/423
83 Hazardous Area Cable Gland Type: 501/453/RAC
84 Hazardous Area Cable Gland Type: 501/453/UNIVERSAL
85 Hazardous Area Cable Gland Type: 501/453/RAC/L
86 Hazardous Area Cable Gland Type: PSG 553/RAC
87 Hazardous Area Cable Gland Type: ICG 623
88 Hazardous Area Cable Gland Type: ICG 653/UNIVERSAL
89 Hazardous Area Cable Gland Type: ICG 653/UNIVERSAL/L
90 Hazardous Area Cable Gland Type: 501/414
91 Hazardous Area Cable Gland Type: SB 474
92 Hazardous Area Cable Gland Type: CSB 656N
93 Mining Cable Glands - Group I
94 Mining Cable Gland Features
95 Mining Cable Gland Type: 453/UNIVERSAL
96 Mining Cable Gland Type: 453/RAC
97 Mining Cable Gland Type: 453/T
98 Mining Cable Gland Type: 623
Connection Solutions
www.ehawke.com HPG01
Hazardous Area Contents
Cable Glands 75
PAGE DESCRIPTION
99 Mining Cable Gland Type: 653/UNIVERSAL
100 Mining Cable Gland Type: 653/T
101 Stopping Plug Type: M475 & M477, Blanking Flange Type 470
102 Adaptor Flange Type: 483
103 North American Cable Glands/Connectors
104 North American Cable Glands/Connectors Features
105 North American Cable Glands/Connectors Type: 710*
106 North American Cable Glands/Connectors Type: 711* (and 713)
109 North American Cable Glands/Connectors Type: 153/X
110 North American Cable Glands/Connectors Type: 701
111 Industrial Cable Glands
112 Industrial Cable Glands Features
113 Industrial Cable Glands Type: 121
115 Industrial Cable Glands Type: 153/UNIVERSAL
116 Industrial Cable Glands Type: 153/RAC
117 Industrial Cable Glands Type: 153/RAC/L
* Dual marked UL & ATEX.

HPG01
www.ehawke.com
Selection Cable Glands
76 Chart
501/ 501/ 501/ PSG ICG ICG

501/ 501/ 453 453 653 ICG 501/
Gland Type/Function 453 453 453 553/ 453/T 653/T 653/ 653/
421 423 UNIV RAC UNIV 623 UNIV L 414
RAC RAC L UNIV RAC UNIV
Industrial
Industrial ( UL Wet Locations )
Dual certified EExe / EExd
Certified IECEx
Certified ExnR
Group II certified
Group I certified
Certified Class 1, Div 1
Certified Class 1, Zone 1
Certified UL / cUL
Certified CSA
Certified Cepel
Certified GOST-R
Certified GOST -K
Certified DNV Marine approval
Certified ABS Marine approval
For use with non-armoured elastomer
& plastic insulated cables
May be used on unarmoured cables
incorporating inner & outer sheaths
For use with single wire armoured 'W',
wire braided 'X' and steel tape armoured
'Z' elastomer and plastic insulated cables
'Z' cables with a lead inner sheath
For use with pliable wire armour
For use with braided cables only
For use with single wire armour only
For cables exhibiting
'cold flow' characteristics
For cables that are not substantially
compact and circular, have extruded
bedding and any fillers are hygroscopic
For use with continuous corrugated
aluminium, interlocked aluminium and
iterlocked steel metal clad and teck cables
Provides a diaphragm seal on the
cables inner sheath
Provides a compound barrier seal between
the individual insulated cores within
the cable
Provides an elastomeric seal between the
individual insulated cores within the cable
For use with enclosures containing
an ignition source in gas group II C areas
For use with enclosures exceeding 2 litres
in volume, containing an ignition
source and installed in a Zone 1 area
Comes with a deluge boot as standard
Has a 'compression' type seal
Can be used with conduit systems
Cable Glands Selection
Chart 77
CSB 153 /
SB 150 / 151 / 153 / 153
656 & 121 123 RAC 114 153/X 701 711 710 753 755 Gland Type/Function
474 656N RAC RAC RAC UNIV
L
Industrial
Industrial ( UL Wet Locations )
Dual certified EExe / EExd
Certified IECEx
Certified ExnR
Group II certified
Group I certified
Certified UL / cUL
Certified CSA
Certified Cepel
Certified GOST-R
Certified GOST -K
Certified DNV Marine approval
Certified ABS Marine approval
For use with non-armoured elastomer
& plastic insulated cables
May be used on unarmoured cables
incorporating inner & outer sheaths
'Z' elastomer and plastic insulated cables
'Z' cables with a lead inner sheath
For use with pliable wire armour
For use with braided cables only
For use with single wire armour only
For cables exhibiting
'cold flow' characteristics
For cables that are not substantially
compact and circular, have extruded
bedding and any fillers are hygroscopic
For use with continuous corrugated
aluminium, interlocked aluminium and
iterlocked steel metal clad and teck cables
Provides a diaphragm seal on the
cables inner sheath
Provides a compound barrier seal between
the individual insulated cores within
the cable
Provides an elastomeric seal between the
individual insulated cores within the cable
For use with enclosures containing
an ignition source in gas group II C areas
For use with enclosures exceeding 2 litres
in volume, containing an ignition
source and installed in a Zone 1 area
Comes with a deluge boot as standard
Has a 'compression' type seal
Can be used with conduit systems
HPG01
www.ehawke.com
Introduction Cable Glands
78
What is a Hazardous area cable gland?

Cable glands are designed to terminate cables in to flameproof or increased safety equipment in hazardous areas. They provide a
weather and gas-proof sealed connection between cable and equipment, prevent the cable being pulled out or twisted and provide
a grounding of the cable armour.
The cost of a cable gland is insignificant when compared to that of other equipment. However, the cost of failure is high.
Though some cable glands may be “fit for purpose” what would be the potential cost of failure?
The cable gland can become the weak link in the chain whereas it should preserve the integrity of the installation.
Why choose Hawke cable glands?

The features and associated benefits of the Hawke International range of cable glands have numerous patented features which
bring numerous benefits to owners, operators and installers alike. Features such as the RAC ring (Reversible Armour Clamp), deluge
seal (preventing water ingress into the gland as well as equipment), diaphragm seal (which prevents cable damage to soft bedded
cables), and the Hawke back seal (with extremely wide cable acceptance and exceptional pull out resistance) all help reduce
installation time, inspection time and reduce overall lifetime costs.
Once fitted, all Hawke Cable Glands can be easily disassembled to allow visual inspection of the inner seal on the cable sheath
(501/453/UNIVERSAL) and full inspection, and if necessary repair of the cured compound in the barrier glands. No other barrier
gland on the market will allow this.
With low numbers of gland components making installation extremely simple, Hawke Cable Glands are right first time, every time.
For more information on specific features and benefits see pages 80, 94, 104 & 112.
Cable Glands - 79
Group II
Features Hazardous Area
80 Cable Glands
3
5
ICG 653 UNIVERSAL 4
5 501/453 UNIVERSAL
2
1 Unique Rear Sealing System 3 Zero Cable Damage

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), The unique Hawke diaphragm sealing system does not
NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is damage cable which exhibit ‘Cold Flow’ characteristics. The
manufactured from a silicone material, has LSFZH properties, diaphragm type seal is the only elastomeric seal to comply
is ozone and oil resistant and is suitable for use at both high fully with IEC/EN 60079-14 and is therefore suitable on effectively
and low temperatures. The Rear Sealing System covers the entire filled ‘cold flow’ cables which would otherwise require barrier
range of cable diameters with out the need for special seals style cable glands. The Hawke diaphragm seal is also unique
and the cable acceptance range is stamped on the backnut in that it is the only flameproof elastomeric seal that can be
for ease of inspection. The backnut can be hand tightened, visually inspected in operation – a real benefit to inspectors.
with only one further spanner turn required to ensure IP66, IP67,
IP68 and NEMA 4X. 4 The Original Reversible Armour Clamp
The original RAC clamping system was invented by Hawke
2 Unique Inspectable Compound Chamber over 10 years ago and is a well established proven performer
The revolutionary Hawke compound chamber has been designed in all conditions. Simply by reversing the clamping ring, the
with inspectability in mind. The pre-lubricated compound cable gland can adjust to accommodate all types of cable
chamber can be removed once the compound has fully cured, armour or braid. Unlike many of our competitors, the correct
allowing full inspection of the flameproof seal. If required, minor stamping orientation is marked clearly with the armour size
surface voids can be repaired in-situ. This unique patented and backed up by the presence of a groove in the component.
compound chamber now forms the compound as well as providing Hawke’s RAC clamping system is also fully Inspectable when
a flameproof seal. positioned on the cable.
5 Inspectable Deluge Seal
Hawke’s Inspectable deluge seal offers IP66 and IP67 sealing
and is certified as ‘deluge proof’ by ITS in accordance with
DTS01. Indeed, Hawke’s deluge seal is so good that it exceeds
the expectations of the offshore industry by not only preventing
ingress into the equipment, but also into the cable gland,
which prevent corrosion of the cable armour.
Cable Glands 501/421
Hazardous Area 81
Flameproof Exd, Increased Safety Exe & Dust Extb
Dual Certified ATEX / IECEx (Fully Compressed Length)
15.0mm G' Approx
Metric
Entry
Application
Entry Thread
The 501/421 cable gland provides a seal on the outer cable sheath and
Ø 'B'
is intended for use on non-armoured elastomer and plastic insulated
cables. The cable gland is certified Exd, Exe and Extb, suitable for
installation in Zone 1 (21) and Zone 2 (22) hazardous areas.
CABLE GLAND SELECTION TABLE

Entry Thread Size Cable Acceptance Details Hexagon Dimensions
Size Outer Sheath ‘B’

NPT * ‘G’
Ref. Across Across
Metric Standard or Standard Seal Alternative Seal (S)
Flats Corners
Option
Min. Max. Min. Max.
2K M16 - 3.2 8.0 - - 23.5 19.0 21.2
Os M20² ½" 6.5 8.0 - - 23.8 24.0 26.5
O M20² ½" 6.5 11.9 - - 23.8 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 8.5 13.5 24.8 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 25.8 36.0 39.5
C M32 1¼" or 1" 19.5 26.5 15.5 21.2 28.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 29.5 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 40.4 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 38.2 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 40.5 95.0 104.0
G M80 3½" 67.0 73.0 - - 41.0 106.4 115.0
H M90 3½" 67.0 77.6 - - 41.0 115.0 130.0
J M100 4" 75.0 91.6 - - 41.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). 2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of
thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length
of thread can be supplied) please specify when ordering.
¹ Smaller value is applicable when selecting reduced NPT entry option.

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm
Technical Data Features

• Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and • When used in Increased Safety applications, this cable gland
Dust Extb IIIC Db II 2 GD. may be used with braided cable where the braid and the
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. outer sheath pass into the enclosure. The braid must then be
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in suitably terminated inside the enclosure.
Gas Groups IIA, IIB and IIC. • Manufactured in Brass (standard), Nickel Plated Brass, 316
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, Stainless Steel or Aluminium.
IEC/EN 60079-7 and IEC/EN 60079-31. • Brass NPT entries are nickel plated as standard.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days)
to IEC/EN 60529 and NEMA 4X.
• Deluge Protection to DTS01.
• Operating Temperature Range: -60°C to +100°C.
• Assembly Instruction Sheet: AI 307.
• Alternative certification options available:
Exe II BR-Exd IIC / Exe II
Exd IIC / Exe II GOST R-Exe IIU
GOST K- Approved for use in Kazakhstan
DNV Marine Approval ABS Marine Approval
KTL – Approved for use in Korea
Ordering Information
Format for ordering is as follows: Alternative Seal (S), add suffix S to ordering information.
Cable Gland Type Size Thread Material (Optional) Cable Gland Type Size Thread Material (Optional)
501/421 C M32 Brass S 501/421 C 1 1⁄4"NPT Brass S
HPG01
www.ehawke.com
UPD 150113
501/423 Cable Glands
82
Hazardous Area
Flameproof Exd & Increased Safety Exe
Dual Certified ATEX / IECEx
15.0mm 'G' Approx (Fully Compressed Length)
Metric
Entry
Application
Entry Thread
The 501/423 cable gland provides two independent seals on non-armoured
Ø 'B'
elastomer and plastic insulated cables. The first is a flameproof seal on the
inner or outer cable sheath, with an additional IP seal on the outer sheath.
The cable gland is dual certified Exd and Exe and is suitable for installation in
Zone 1 (21) and Zone 2 (22) hazardous areas.

Size Outer Sheath ‘B’

NPT * ‘G’
Ref. Across Across
Flats Corners
Option
Min. Max. Min. Max.
Os M20² ½" 3.0 8.0 - - 40.0 24.0 26.5
O M20² ½" 7.5 11.9 - - 40.0 24.0 26.5
A M20 ¾" or ½" 11.0 14.3 8.5 13.5 40.4 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 44.3 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 15.5 21.2 47.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 49.5 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 72.5 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 64.8 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 68.0 95.0 104.0
G M80 3½" 67.0 73.0 - - 68.0 106.4 115.0
H M90 3½" 67.0 77.6 - - 68.0 115.0 130.0
J M100 4" 75.0 91.6 - - 68.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of
thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be
supplied) please specify when ordering.


• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides superior cable retention to standard unarmoured
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. cable glands, with a seal at two independent points.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in • When used in Increased Safety applications, this cable gland
Gas Groups IIA, IIB and IIC. may be used with braided cable where the braid and the outer
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, sheath pass into the enclosure. The braid must then be suitably
terminated inside the enclosure.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Manufactured in Brass (standard), Nickel Plated Brass,
to IEC/EN 60529 and NEMA 4X. 316 Stainless Steel or Aluminium.
• Deluge Protection to DTS01. • Brass NPT entries are nickel plated as standard.
Cable Gland Type Size Thread (Optional) Cable Gland Type Size Thread (Optional)
501/423 C M32 S 501/423 C 1 1⁄4"NPT S
UPD 090610
Cable Glands 501/453 RAC
Hazardous Area 83

Armour/Braid 'C'
Metric
Entry
Application
• Outdoor or indoor use.
Entry Thread
• For use with single wire armour‘W’, wire braid‘X’, steel tape armour‘Z’,
Ø 'A'
Ø 'B'
elastomer and plastic insulated cables.
• See technical section for installation rules and regulations.

Hexagon
Entry Thread Size Cable Acceptance Details
Dimensions
Size Inner Sheath ‘A’ Outer Sheath
“NPT * Armour / Braid 'C' ‘G’
Ref. 'B' Across Across
Flats Corners
Option”
Min. Max. Min. Max. Min. Max. Orientation 1 Orientation 2
Os M20² ½" 3.0 8.0 - - 5.5 12.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
O M20² ½" 6.5 11.9 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 8.5 13.4 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 12.5 20.2 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 59.5 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 14.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.4 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 67.0 73.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 67.0 77.6 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 75.0 91.6 - - 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please
specify when ordering.
¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the
maximum cable inner sheath diameter is 10.9mm.

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides armour clamping using one clamping arrangement
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. for all armour / braid types.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in • Provides a seal on the cables inner sheath.
Gas Groups IIA, IIB and IIC. • Provides a cable retention and low smoke and fume, zero
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, halogen seal onto the cables outer sheath.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Deluge protection option available,
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) contact Hawke Technical Sales for details.
to IEC/EN 60529 and NEMA 4X. • Manufactured in Brass (standard), Nickel Plated Brass,
• Deluge Protection to DTS01 (Deluge Seal Optional). 316 Stainless Steel or Aluminium.
• Operating Temperature Range: -60°C to +80°C. • Brass NPT entries are nickel plated as standard.
• Assembly Instruction Sheet: AI 302. Alternative Reversible Armour Clamping Rings (RAC)
• Alternative certification options available: SELECTION TABLE
Exe II BR-Exd IIC / Exe II Steel Wire Armour / Braid / Tape
Size Ref.
Orientation 1 Orientation 2
B 0.9 - 1.25 0.5 - 0.9
GOST K- Approved for use in Kazakhstan C 1.2 - 1.6 0.6 - 1.2
DNV Marine Approval ABS Marine Approval C2 1.2 - 1.6 0.6 - 1.2
KTL – Approved for use in Korea D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternative Clamping Ring (AR), add suffix AR to ordering information. Alternative Seal (S), add suffix S to
ordering information.
501/453/RAC C M32 AR 501/453/RAC C M32 S
501/453/RAC C 1 1⁄4NPT AR 501/453/RAC C 1 1⁄4NPT S
HPG01
www.ehawke.com
UPD 170610
501/453/UNIVERSAL Cable Glands
84
Hazardous Area
Flameproof Exd & Increased Safety Exe & Restricted
Breathing ExnR Dual Certified ATEX / IECEx
Metric Diaphragm Seal Armour/Braid 'C'

Entry Application
Entry Thread
• For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’,
Ø 'B'
Ø 'A'

• For particular use with Cables that exhibit‘Cold Flow’characteristics.
Deluge Boot

Size Ref. NPT * Inner Sheath ‘A’ Outer Sheath ‘B’ Armour / Braid ‘C’ 'G' Across Across
Metric Standard or
Option Min. Max. Min. Max. Orientation 1 Orientation 2 Flats Corners
Os M20² ½" 3.5 8.1 5.5 12.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
O M20² ½" 6.5 11.4 9.5 16.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
A M20 ¾" or ½" 8.4 14.3 12.5 20.5 0.8 / 1.25 0.0 / 0.8 63.0 30.0 32.5
B M25 1" or ¾" 11.1 19.7 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.9 36.0 39.5
C M32 1¼" or 1" 17.6 26.5 22.0 33.0 1.6 / 2.0 0.0 / 0.7 73.2 46.0 50.5
C2 M40 1½" or 1¼" 23.1 32.5 28.0 41.0 1.6 / 2.0 0.0 / 0.7 77.9 55.0 60.6
D M50 2" or 1½" 28.9 44.4 / 42.3¹ 36.0 52.6 1.8 / 2.5 0.0 / 1.0 93.5 65.0 70.8
E M63 2½" or 2" 39.9 56.3 / 54.3¹ 46.0 65.3 1.8 / 2.5 0.0 / 1.0 94.0 80.0 88.0
F M75 3" or 2½" 50.5 68.2 / 65.3¹ 57.0 78.0 1.8 / 2.5 0.0 / 1.0 103.0 95.0 104.0
G M80 3½" 67.0 73.0 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 106.4 115.0
H M90 3½" 67.0 77.6 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 115.0 130.0
J M100 4" 75.0 91.6 88.0 104.5 2.5 / 4.0 0.0 / 1.0 90.6 127.0 142.0
specify when ordering. G size and above are available in the 501/453/RAC design style.

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21 • Provides armour clamping using one clamping arrangement for
and Restricted Breathing ExnR II 3G. all armour / braid types.
• Certificate No’s: For sizes Os to F: Baseefa06ATEX0057X and IECEx • Provides a diaphragm seal on inner sheath of cable which will
BAS 06.0014X. For sizes G to J: Baseefa06ATEX0056X and IECEx not damage cables that exhibit ‘Cold Flow’ characteristics.
BAS 06.0013X. • Provides an outer deluge seal to prevent moisture ingress to the
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in cable armour / braid.
Gas Groups IIA, IIB and IIC. • Provides a cable retention and low smoke and fume, zero halogen
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN seal onto the cables outer sheath.
60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and • Manufactured in Brass (standard), Nickel Plated Brass,
IEC/EN 61241-1. 316 Stainless Steel or Aluminium.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Brass NPT entries are nickel plated as standard.
• Operating Temperature Range: -60°C to +80°C. Alternative Reversible Armour Clamping Rings (RAC)
• Assembly Instruction Sheet: AI 300 (Sizes Os to F)
and AI 303 (Sizes G to J). SELECTION TABLE
• Alternative certification options available: Size Ref. Steel Wire Armour / Braid / Tape
B 0.9 - 1.25 0.5 - 0.9
Exd IIC / Exe II GOST R-Exe IIU C 1.2 - 1.6 0.6 - 1.2
GOST K- Approved for use in Kazakhstan C2 1.2 - 1.6 0.6 - 1.2
DNV Marine Approval ABS Marine Approval D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternative Clamping Ring (AR), add suffix AR to ordering information.
501/453/UNIV C M32 AR 501/453/UNIV C 1 1⁄4"NPT AR
UPD 170610
Cable Glands 501/453/RAC/L
Hazardous Area (for Lead Sheath Cables) 85

Metric Lead Sheath Bond Armour/Braid 'C'
Application Entry
Entry Thread
Ø 'B'
Ø 'A'
elastomer and plastic insulated cables with a lead inner sheath.

Entry Thread Size Cable Acceptance Details Hexagon
Dimensions
Size Inner Sheath ‘A’
“NPT * ‘G’
Ref. Standard Seal (L) Alternative Seal (K) Outer Sheath 'B' Armour / Braid 'C' Across Across
Metric Standard or Seal + Bond Seal + Bond Flats Corners
Option”
O M20² ½" 6.5 10.5 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" - - 8.5 13.0 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 12.5 19.0 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 59.5 36.0 39.5
C M32 1¼" or 1" 19.0 25.0 14.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 31.2 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 42.3 / 42.8¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 53.3 / 54.5¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.4 80.0 88.0
F M75 3" or 2½" 54.5 66.0 / 64.3¹ 48.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 67.0 70.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 67.0 75.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 75.0 89.5 - - 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). O - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be
supplied) please specify when ordering.

² Size O is available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm
• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides armour clamping using one clamping arrangement for
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. all armour / braid types.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in • Provides a seal and an electrical bond to the cables lead inner sheath.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, seal onto the cables outer sheath.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Deluge protection option available, contact Hawke Technical Sales
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) for details.
to IEC/EN 60529 and NEMA 4X. • Manufactured in Brass (standard), Nickel Plated Brass,
• Deluge Protection to DTS01 (Deluge Seal Optional). 316 Stainless Steel or Aluminium.
• Assembly Instruction Sheet: AI 302 and Al 336. Alternative Reversible Armour Clamping Rings (RAC)
• Alternative certification options available: SELECTION TABLE
Exe II BR-Exd IIC / Exe II Steel Wire Armour / Braid / Tape
Size Ref.
Exd IIC / Exe II GOST R-Exe IIU Orientation 1 Orientation 2
GOST K- Approved for use in Kazakhstan B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
KTL – Approved for use in Korea D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Standard Inner Seal + Bond, add suffix L to ordering information. Alternative Inner Seal +Bond, add suffix K
to ordering information. Alternative Clamping Ring (AR), add suffix AR to ordering information.
Cable Size Thread Lead (Optional) Cable Size Thread Lead (Optional) Cable Gland Size Thread Lead (Optional)
Gland Type Gland Type Type
501/453/RAC C M32 L AR 501/453/ C 1 1/4" L AR 501/453/RAC C 1 1/4" K AR
RAC NPT NPT
HPG01
www.ehawke.com
UPD 170610
PSG 553/RAC Cable Glands
86 Hazardous Area
15.0mm 'G' Approx (Fully Compressed Length) Application

Metric
Armour/Braid 'C'
Entry
• For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer
and plastic insulated cables.
Entry Thread
• For particular use with:-
Ø 'B'
- Cables that are not effectively filled, compact and/or circular, have tape
bedding or have hygroscopic fillers.
- Cables that exhibit ‘Cold Flow’ characteristics.
- Enclosures for gas group IIC, under 2 litres in volume and containing
an ignition source.
- Enclosures for gas groups IIA or IIB, which are greater than 2 litres in volume
and contain an ignition source.
• See technical section for installation rules and regulations
Size “NPT * Outer Sheath 'B' Armour / Braid 'C' ‘G’ Across
Ref. Metric Standard or Across Flats
Orientation Orientation Corners
Option” Min. Max.
1 2
A M20 ¾" or ½" 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.5 36.0 39.5
C M32 1¼" or 1" 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard, 15mm length of thread.

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides a barrier seal to the individual insulated cores within
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. the cable and prevents entry of the products of an explosion into
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in the cable.
Gas Groups IIA, IIB and IIC. • The required number of holes for the cores are punched in the
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, seal by means of a special tool to suit the core size.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Provides armour clamping using one clamping arrangement for
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) all armour / braid types.
to IEC/EN 60529 and NEMA 4X. • Provides a cable retention and low smoke and fume, zero halogen
• Deluge Protection to DTS01 (Deluge Seal Optional). seal onto the cables outer sheath.
• Operating Temperature Range: -60°C to +80°C. • Deluge protection option available, contact Hawke Technical
• Assembly Instruction Sheet: AI 312. Sales for details.
• Alternative certification options available: • Manufactured in Brass (standard), Nickel Plated Brass,
Exd IIC / Exe II GOST R-Exe IIU 316 Stainless Steel or Aluminium.
• Brass NPT entries are nickel plated as standard.

CABLE GLAND SIZE FOR CORE SIZE AND NUMBER
PUNCH TOOL SIZE DETAILS Max. No. Cores Cross Sectional Area mm²
Punch Ref. No. 1 No. 2 No. 3 of Cores 1.5 2.5 4.0 6.0 10.0
Cores C.S.A.mm² 1.5 - 2.5 4.0 - 6.0 10.0 7 A&B A&B B&C C C
4 - - - B -
3 - - - - B
Deluge protection option available.
Format for ordering is as follows: To obtain punch tool required, refer to tables.
Cable Gland Type Size Thread Punch Tool Required Cable Gland Type Size Thread Punch Tool Required
PSG 553/RAC C M32 Punch Tool No. 1 PSG 553/RAC C 1 1⁄4"NPT Punch Tool No. 1
UPD 090610
Cable Glands ICG 623
Hazardous Area 87
Application 15.0mm 'G' Approx (Fully Compressed Length)

Inspectable Compound
• Outdoor or indoor use. Metric
• For use with non-armoured elastomer and plastic insulated cables. Entry
Entry Thread
Ø 'B'
- Cables that are not effectively filled, compact and/or circular, have
Ø 'D'
Ø 'E'
tape bedding or have hygroscopic fillers.
- Enclosures containing an ignition source in gas group IIC areas or
containing an ignition source in a Zone 1 area and exceeding 2 litres
in volume.

Size Entry Thread Size Cable Acceptance Details Hexagon Dimensions
Ref. Metric NPT * Inner Sheath / Cores Outer Sheath 'B' Across Across
Standard or ' D ' Max. 'E' Max In- Max. No. of Standard Seal Alternative Seal (S) 'G' Flats Corners
Option Over Cores ner Sheath Cores Min. Max. Min. Max.
Os M20 ½" 8.0 8.0 6 3.0 8.0 - - 56.4 24.0 26.5
O M20 ½" 8.9 10.0 6 7.5 11.9 - - 56.4 24.0 26.5
A M20 ¾" or ½" 11.0 12.5 10 11.0 14.3 8.5 13.4 55.8 30.0 32.5
B M25 1" or ¾" 16.2 18.4 21 13.0 20.2 9.5 15.4 58.8 36.0 39.5
C M32 1¼" or 1" 21.9 24.7 42 19.0 26.5 15.5 21.2 62.0 46.0 50.5
C2 M40 1½" or 1¼" 26.3 29.7 60 25.0 32.5 22.0 28.0 64.5 55.0 60.6
D M50 2" or 1½" 37.1 41.7 80 31.5 44.4 27.5 34.8 72.8 65.0 70.8
E M63 2½" or 2" 47.8 53.5 100 42.5 56.3 39.0 46.5 77.0 80.0 88.0
F M75 3" or 2½" 59.0 66.2 / 65.3¹ 120 54.5 68.2 48.5 58.3 80.7 95.0 104.0
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard,
15mm length of thread.

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides a barrier seal between the individual insulated cores
• Certificate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X. within the cable and prevents entry of the products of an
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in explosion into the cable.
Gas Groups IIA, IIB and IIC. • Assembly of the cable gland compresses and distributes the
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, compound evenly to create a barrier seal at the point of entry
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. into the enclosure.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • The compound chamber may be separated from the cured
to IEC/EN 60529 and NEMA 4X. compound to ensure that the chamber has been effectively filled.
• Deluge Protection to DTS01. If required, external voids can be repaired.
• Operating Temperature Range: -60°C to +80°C. • Provides a cable retention seal onto the cables outer sheath.
• Assembly Instruction Sheet: AI 305. • Manufactured in Brass (standard), Nickel Plated Brass,
• Alternative certification options available: 316 Stainless Steel or Aluminium.

ICG 623 C M32 S ICG 623 C 1 1/4" NPT S
Two part sealing compound and assembly instructions are supplied with the cable gland.
HPG01
www.ehawke.com
UPD 090610
ICG 653/UNIVERSAL Cable Glands
88
Hazardous Area
Application
Metric
Entry
Inspectable
Compound Deluge Boot Armour/Braid 'C' • For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’,
Entry Thread
- Cables that are not effectively filled, compact and/or circular,

Ø 'D'
Ø 'E'
Ø 'B'
have tape bedding or have hygroscopic fillers.
- Enclosures containing an ignition source in gas group IIC
areas or containing an ignition source in a Zone 1 area.
Dimensions
Size Metric NPT * Inner Sheath / Cores 'G'
Ref. Standard Max. Over Max Inner Max. No. of Outer Sheath ‘B’ Armour / Braid ‘C’ Across Across
or Option Cores ‘D’ Sheath ‘E’ Cores Flats Corners
Min Max Orientation 1 Orientation 2
Os M20 ½" 8.9 10.0 6 5.5 12.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
O M20 ½" 8.9 10.0 6 9.5 16.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
A M20 ¾" or ½" 11.0 12.5 10 12.5 20.5 0.8 / 1.25 0.0 / 0.8 67.0 30.0 32.5
B M25 1" or ¾" 16.2 18.4 21 16.9 26.0 1.25 / 1.6 0.0 / 0.7 73.6 36.0 39.5
C M32 1¼" or 1" 21.9 24.7 42 22.0 33.0 1.6 / 2.0 0.0 / 0.7 78.0 46.0 50.5
C2 M40 1½" or 1¼" 26.3 29.7 60 28.0 41.0 1.6 / 2.0 0.0 / 0.7 82.4 55.0 60.6
D M50 2" or 1½" 37.1 41.7 80 36.0 52.6 1.8 / 2.5 0.0 / 1.0 88.7 65.0 70.8
E M63 2½" or 2" 47.8 53.5 100 46.0 65.3 1.8 / 2.5 0.0 / 1.0 92.7 80.0 88.0
F M75 3" or 2½" 59.0 66.2 / 65.3¹ 120 57.0 78.0 1.8 / /2.5 0.0 / 1.0 99.4 95.0 104.0
¹ Smaller value is applicable when selecting reduced NPT entry option. Note: Larger sizes are available.
• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides a barrier seal to the individual insulated cores within the cable
• Certificate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X. and prevents entry of the products of an explosion into the cable.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in • Assembly of the cable gland compresses and distributes the compound
Gas Groups IIA, IIB and IIC. evenly to create a barrier seal at the point of entry into the enclosure.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, • The compound chamber may be separated from the cured compound
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. to ensure that the chamber has been effectively filled. If required,
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to external voids can be repaired.
IEC/EN 60529 and NEMA 4X. • Provides armour clamping, using one clamping arrangement for
• Deluge Protection to DTS01. all armour / braid types.
• Operating Temperature Range: -60°C to +80°C. • Provides an outer deluge seal to prevent moisture ingress to the
• Assembly Instruction Sheet: AI 301. cable armour / braid.
• Alternative certification options available: • Provides a cable retention and low smoke and fume, zero halogen seal
onto the cables outer sheath.
Exe II BR-Exd IIC / Exe II • Manufactured in Brass (standard), Nickel Plated Brass,
Alternative Reversible Armour Clamping Rings (RAC)
SELECTION TABLE
Steel Wire Armour / Braid / Tape
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Cable Gland Type Size Thread (OPTIONAL) Cable Gland Type Size Thread (OPTIONAL)
ICG 653/UNIV C M32 AR ICG 653/UNIV C 1 1⁄4"NPT AR
UPD 090610
Cable Glands ICG 653/UNIVERSAL/L
Hazardous Area (for Lead Sheath Cables) 89
Application
• Outdoor or indoor use. 15.0mm 'G' Approx (Fully Compressed Length)
• For use with single wire armour‘W’, wire braid‘X’, steel tape armour‘Z’, Metric
Entry
Inspectable
Compound Deluge Boot
Lead Sheath Bond
Armour/Braid 'C'
elastomer and plastic insulated cables with a lead inner sheath.
Entry Thread
- Cables that are not effectively filled, compact and/or circular, have
Ø 'D'
Ø 'E'
Ø 'B'
tape bedding or have hygroscopic fillers.
containing an ignition source in a Zone 1 area.
Cable Acceptance Details Hexagon
Entry Thread Size Dimensions
Inner Sheath / Cores
Size Metric NPT * ' D ' Max. Max Inner Max. No. of Outer Sheath 'B' Armour / Braid 'C' 'G' Across Across
Ref. Standard or Over Cores Sheath ‘E’ Cores Flats Corners
Option
Min. Max. Min. Max. Orientation 1 Orientation 2
Os M20 ½" 8.5 4.0 10.0 6 5.5 12.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
O M20 ½" 8.5 4.0 10.0 6 9.5 16.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
A M20 ¾" or ½" 10.8 7.4 12.5 10 12.5 20.5 0.8 / 1.25 0.0 / 0.8 67.0 30.0 32.5
B M25 1" or ¾" 16.2 11.0 18.4 21 16.9 26.0 1.25 / 1.6 0.0 / 0.7 73.6 36.0 39.5
C M32 1¼" or 1" 21.9 14.0 24.7 42 22.0 33.0 1.6 / 2.0 0.0 / 0.7 78.0 46.0 50.5
C2 M40 1½" or 1¼" 26.3 21.0 29.7 60 28.0 41.0 1.6 / 2.0 0.0 / 0.7 82.4 55.0 60.6
D M50 2" or 1½" 37.1 27.0 41.7 80 36.0 52.6 1.8 / 2.5 0.0 / 1.0 88.7 65.0 70.8
E M63 2½" or 2" 47.8 39.0 53.3 100 46.0 65.3 1.8 / 2.5 0.0 / 1.0 92.7 80.0 88.0
F M75 3" or 2½" 59.0 51.0 64.0 120 57.0 78.0 1.8 / 2.5 0.0 / 1.0 99.4 95.0 104.0

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides a barrier seal between the individual insulated cores within
• Certificate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X. the cable and prevents entry of the products of an explosion into the cable.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in • Assembly of the cable gland compresses and distributes the compound
Gas Groups IIA, IIB and IIC. evenly to create a barrier seal at the point of entry into the enclosure.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, • The compound chamber may be separated from the cured compound
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. to ensure that the chamber has been effectively filled. If required,
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) external voids can be repaired.
to IEC/EN 60529 and NEMA 4X. • Provides armour clamping, using one clamping arrangement for all
• Deluge Protection to DTS01. armour / braid types.
• Operating Temperature Range: -60°C to +80°C. • Provides a seal and an electrical bond on the cables lead inner sheath.
• Assembly Instruction Sheet: AI 301 and AI 336. • Provides an outer deluge seal to prevent moisture ingress to the
• Alternative certification options available: cable armour / braid.
• Provides a cable retention and low smoke and fume, zero halogen
seal onto the cables outer sheath.
Exd IIC / Exe II GOST R-Exe IIU • Manufactured in Brass (standard), Nickel Plated Brass,
316 Stainless Steel or Aluminium.
GOST K- Approved for use in Kazakhstan • Brass NPT entries are nickel plated as standard.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Standard Inner Seal + Bond, add suffix L to ordering information. Alternative Clamping Ring (AR), add suffix
AR to ordering information.
Cable Gland Size Thread Lead (Optional) Cable Gland Size Lead Thread (Optional) Two part sealing compound and assembly instructions are
Type Type supplied with the cable gland.
ICG 653/UNIV C M32 L AR ICG 653/UNIV C L 1 1/4" NPT AR
HPG01
www.ehawke.com
UPD 090610
501/414 Cable Glands
90
Hazardous Area

Metric • Outdoor or indoor use.
Entry • For use with non-armoured elastomer and plastic insulated cables installed
in conduit.
Entry Thread
Female Entry
Thread
Male
Ø 'B'

Male Entry Thread Size Female Entry Thread Size Cable Acceptance Details Hexagon Dimensions
Size NPT * NPT # Outer Sheath 'B'
Standard Seal Alternative Seal (S) 'G' Across Across
Ref. Metric Standard or Metric Standard or
Flats Corners
Option Option Min. Max. Min. Max.
Os M20² ½" M20 - 3.0 8.0 - - 54.5 24.0 26.5
O M20² ½" M20 - 7.5 11.9 - - 54.5 24.0 26.5
A M20 ¾" or ½" M20 - 11.0 14.3 8.5 13.4 56.4 30.0 32.5
B M25 1" or ¾" M25 - 13.0 20.2 9.5 15.4 48.2 36.0 39.5
C M32 1¼" or 1" M32 - 19.0 26.5 15.5 21.2 61.6 46.0 50.5
C2 M40 11⁄2" or 11⁄4" M40 - 25.0 32.5 22.0 28.0 64.6 55.0 60.6
D M50 2" or 11⁄2" M50 - 31.5 44.4/42.31 27.5 34.8 83.2 65.0 70.8
E M63 21⁄2" or 2" M63 - 42.5 56.3/54.31 39.0 46.5 83.2 80.0 88.0
F M75 3" or 21⁄2" M75 - 54.5 68.2/65.31 48.5 58.3 86.4 95.0 104.0
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard.
¹ Smaller value is applicable when selecting reduced NPT male entry option.
# NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter.

• Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Provides a cable retention seal onto the cables outer sheath.
• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. • When used in Increased Safety applications, this cable gland may
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas be used with braided cable where the braid and the cables outer
Groups IIA, IIB and IIC. sheath pass into the enclosure. The braid must be suitably
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, terminated into the enclosure.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Provides female running coupler for cable gland or conduit entry.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to • Manufactured in Brass (standard), Nickel Plated Brass,
IEC/EN 60529 and NEMA 4X. 316 Stainless Steel or Aluminium.
Exe II Exd IIC / Exe II
GOST R-Exe IIU
501/414 C M32 S 501/414 C 1 1⁄4"NPT S
UPD 240613
Cable Glands SB 474
Hazardous Area 91
• Outdoor or indoor use. Metric

• For particular use with:- Entry
Female Entry
Entry Thread
Thread
Male
- Enclosures for gas group IIC, under 2 litres in volume and
containing an ignition.
- Enclosures for gas groups IIA and IIB, which are greater than
2 litres in volume and contain an ignition source.
CABLE GLAND SELECTION N TABLE
Male Entry Thread Size Female Entry Thread
d Size Hexagon Dimensions
Size Ref. NPT * NPTT # 'G'
Metric Metric Across Flats Across Corners
Standard or Option Standard or Option
A M20 ¾" or ½" M20 - 56.4 30.0 32.5
B M25 1" or ¾" M25 - 48.2 36.0 39.5
C M32 1¼" or 1" M32 - 61.6 46.0 50.5

• Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. within the cable and prevents entry of the products of an explosion
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas into the cable.
Groups IIA, IIB and IIC. • The required number of holes for the cores are punched in the
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, seal by means of a special tool to suit the core size.
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Provides female running coupler for cable gland or conduit entry.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to • Manufactured in Brass (standard), Nickel Plated Brass,
IEC/EN 60529 and NEMA 4X. 316 Stainless Steel or Aluminium.
CABLE GLAND SIZE FOR CORE SIZE AND NUMBER
Max. No. Cores Cross Sectional Area mm²
of Cores 1.5 2.5 4.0 6.0 10.0
PUNCH TOOL SIZE DETAILS 7 A&B A&B B&C C C
Punch Ref. No. 1 No. 2 No. 3 4 - - - B -
Cores C.S.A.mm² 1.5 - 2.5 4.0 - 6.0 10.0 3 - - - - B
Format for ordering is as follows: To obtain punch tool required, refer to tables.
Cable Gland Type Size Thread Punch Tool Required Cable Gland Type Size Thread Punch Tool Required
SB 474 C M32 Punch Tool No.1 SB 474 C 11/4"NPT Punch Tool No.1
HPG01
www.ehawke.com
UPD 090610
CSB 656 N Cable Glands
92
Hazardous Area

Inspectable • Outdoor or indoor use.
Metric
Entry
Compound • For use with conduit incorporating individual insulated conductors.
Female Entry
- Cables that are not effectively filled, compact and/or circular, have tape
Entry Thread
Thread
bedding or have hygroscopic fillers.
Male
Ø'D'
Ø'E'

containing an ignition source in a Zone 1 area and exceeding
2 litres in volume.

Male Entry Thread Size Female Entry Thread Size Inner Sheath / Cores Hexagon Dimensions
Size NPT * NPT * Max. Over Max Inner 'G'
Max. No. of Across Across
Ref. Metric Standard or Metric Standard or Cores Sheath Metric
Cores Flats Corners
Option Option 'D' 'E'
A M20 ¾" or ½" M20 ¾" or ½" 11.0 12.5 10 74 30.0 32.5
B M25 1" or ¾" M25 1" or ¾" 16.2 18.4 21 65 36.0 39.5
C M32 1¼" or 1" M32 1¼" or 1" 21.9 24.7 42 80 46.0 50.5
C2 M40 1½" or 1¼" M40 1½" or 1¼" 26.3 29.7 60 83 55.0 60.6
D M50 2" or 1½" M50 2" or 1½" 37.1 41.7 80 94 65.0 70.8
E M63 2½" or 2" M63 2½" or 2" 47.8 53.5 100 97 80.0 88.0
F M75 3" or 2½" M75 3" or 2½" 59.0 66.2 / 65.31 120 100 95.0 104.0
Hexagon dimensions as shown may alter.
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in •
into the cable or conduit.
Seals conductors at entry to enclosure via conduit or enables an
Gas Groups IIA, IIB and IIC.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, •
existing cable gland to be converted to a barrier type cable gland.
The device is fitted with a simple compound filled chamber which
IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) •
permits packing around individual insulated conductors.
Assembly of the cable gland compresses and distributes the
• Deluge Protection to DTS01. compound evenly to create a barrier seal at the point of entry into
• Operating Temperature Range: -60°C to +80°C. •
the enclosure.
• Assembly Instruction Sheet: AI 375. •
If required, external voids can be repaired.
• Alternative certification options available: •
Provides female running coupler for cable gland or conduit entry.
Manufactured in Brass (standard), Nickel Plated Brass,
GOST K- Approved for use in Kazakhstan • Brass NPT entries are nickel plated as standard.
Format for ordering is as follows:
Cable Gland Type Size Male Thread Female Thread Cable Gland Type Size Male Thread Female Thread
CSB 656 N C M32 M32 CSB 656 N C 1 1⁄4"NPT M32
UPD 090610
Cable Glands - 93
Group I Mining
Features Cable Glands
94
Mining
4
653 UNIVERSAL
453 UNIVERSAL
2
1 Unique Rear Sealing System 3 Zero Cable Damage

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), The unique Hawke diaphragm sealing system does not
NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is damage cable which exhibit ‘Cold Flow’ characteristics. The
manufactured from a silicone material, has LSFZH properties, diaphragm type seal is the only elastomeric seal to comply
is ozone and oil resistant and is suitable for use at both high fully with IEC/EN 60079-14 and is therefore suitable on effectively
and low temperatures. The Rear Sealing System covers the entire filled ‘cold flow’ cables which would otherwise require barrier
range of cable diameters with out the need for special seals style cable glands. The Hawke diaphragm seal is also unique
and the cable acceptance range is stamped on the backnut in that it is the only flameproof elastomeric seal that can be
for ease of inspection. The backnut can be hand tightened, visually inspected in operation – a real benefit to inspectors.
with only one further spanner turn required to ensure IP66, IP67,
IP68 and NEMA 4X. 4 The Original Reversible Armour Clamp
2 Unique Inspectable Compound Chamber over 10 years ago and is a well established proven performer
The revolutionary Hawke compound chamber has been designed in all conditions. Simply by reversing the clamping ring, the
with inspectability in mind. The pre-lubricated compound cable gland can adjust to accommodate all types of cable
chamber can be removed once the compound has fully cured, armour or braid. Unlike many of our competitors, the correct
allowing full inspection of the flameproof seal. If required, minor stamping orientation is marked clearly and backed up
surface voids can be repaired in-situ. This unique patented by the presence of a groove in the component. Hawke’s RAC
compound chamber now forms the compound as well as providing clamping system is also fully Inspectable when positioned
a flameproof seal. on the cable.
Cable Glands 453/UNIVERSAL
Mining 95

Application
• Mining. Metric
Entry
Diaphragm Seal Armour/Braid 'C'
Entry Thread
Ø 'A'
Ø 'B'

Metric Standard or
Os M20 ½" 3.0 8.1 5.5 12.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
O M20 ½" 6.5 11.5 9.5 16.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
A M20 ¾" or ½" 8.4 14.3 12.5 20.5 0.8 / 1.25 0.0 / 0.8 63.0 30.0 32.5
B M25 1" or ¾" 11.1 19.7 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.9 36.0 39.5
C M32 1¼" or 1" 17.6 26.5 22.0 33.0 1.6 / 2.0 0.0 / 0.7 73.2 46.0 50.5
C2 M40 1½" or 1¼" 23.1 32.5 28.0 41.0 1.6 / 2.0 0.0 / 0.7 77.9 55.0 60.6
D M50 2" or 1½" 28.9 44.4 / 42.3¹ 36.0 52.6 1.8 / 2.5 0.0 / 1.0 93.5 65.0 70.8
E M63 2½" or 2" 39.9 56.3 / 54.3¹ 46.0 65.3 1.8 / 2.5 0.0 / 1.0 94.0 80.0 88.0
F M75 3" or 2½" 50.5 68.2 / 65.3¹ 57.0 78.0 1.8 / 2.5 0.0 / 1.0 101.0 95.0 104.0

• Flameproof Exd and Increased Safety Exe I M2. • Provides armour clamping using one clamping arrangement
• Certificate No’s: Baseefa08ATEX0330X and IECEx BAS 08.0114X. for all armour / braid types.
• Suitable for use in Mines. • Provides a diaphragm seal on the cables inner sheath which will
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 not damage cable that has ‘Cold Flow’ characteristics.
and IEC/EN 60079-7. • Provides a cable retention and low smoke and fume, zero
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to halogen seal onto the cables outer sheath.
IEC/EN 60529. • Manufactured in Brass (standard), Nickel Plated Brass or
• Operating Temperature Range: -60°C to +80°C. 316 Stainless Steel.
• Assembly Instruction Sheet: AI 371. • Brass NPT entries are nickel plated as standard.
SELECTION TABLE
Size Ref. Steel Wire Armour / Braid / Tape
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
453/UNIV C M32 AR 453/UNIV C 1 1⁄4"NPT AR
HPG01
www.ehawke.com
UPD 090610
453/RAC Cable Glands
96
Mining

Armour/Braid 'C'
Metric
Entry Application
A
• Mining.
Entry Thread
Ø 'A'
Ø 'B'

Hexagon
Dimensions
NPT * Outer Sheath 'B' Armour / Braid 'C' 'G'
Ref. Standard Seal Alternative Seal (S) Across Across
Metric Standard
Orientation Orientation Flats Corners
or Option Min. Max. Min. Max. Min. Max.
1 2
Os M20 ½" 3.0 8.0 - - 5.5 12.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
O M20 ½" 6.5 11.9 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 8.5 13.4 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 12.5 19.7 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.5 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 14.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.9 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0

• Flameproof Exd and Increased Safety Exe I M2. • Provides armour clamping using one clamping arrangement for
• Certificate No’s: Baseefa08ATEX0331X and IECEx BAS 08.0112X. all armour / braid types.
• Suitable for use in Mines. • Provides a seal onto the cables inner sheath.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 • Provides a cable retention and low smoke and fume, zero halogen
and IEC/EN 60079-7. seal onto the cables outer sheath.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to • Manufactured in Brass (standard), Nickel Plated Brass or
IEC/EN 60529. 316 Stainless Steel.
• Assembly Instruction Sheet: AI 383. Alternative Reversible Armour Clamping Rings (RAC)
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternative Clamping Ring (AR), add suffix AR to ordering information. Alternative Seal (S), add suffix S to
ordering information.
Cable Gland Type Size Thread (OPTIONAL) Cable Gland Type Size Male Thread (OPTIONAL)
453/RAC C M32 AR 453/RAC C 1 1⁄4"NPT AR
453/RAC C M32 S 453/RAC C 1 1⁄4"NPT S
UPD 090610
Cable Glands 453/T
Mining 97

Pliable wire armour 'C'
Metric
Application Entry
• Mining.
Entry Thread
• For use with pliable wire armoured cables.
Ø 'A'
Ø 'B'

Hexagon
Dimensions
NPT * Outer Sheath 'B' 'G'
Ref. Standard Seal Alternative Seal (S) Pliable Wire Across Across
Metric Standard or
Armour 'C' Flats Corners
Option Min. Max. Min. Max. Min. Max.
Os M20 ½" 3.0 8.0 - - 5.5 12.0 7 x 0.45 50.2 24.0 26.5
O M20 ½" 6.5 11.9 - - 9.5 16.0 7 x 0.45 50.2 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 8.5 13.4 12.5 20.5 7 x 0.45 52.0 30.0 32.5
B M25 1" or ¾" 12.5 19.7 9.5 15.4 16.9 26.0 7 x 0.45 59.2 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 14.5 21.2 22.0 33.0 7 x 0.45 63.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 7 x 0.71 68.7 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 36.0 52.6 7 x 0.71 86.1 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 46.0 65.3 7 x 1.25 82.2 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 57.0 78.0 7 x 1.25 87.0 95.0 104.0
All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard,
15mm length of thread.

• Flameproof Exd and Increased Safety Exe I M2. • Provides armour clamping using one clamping arrangement.
• Certificate No’s: Baseefa08ATEX0331X and IECEx BAS 08.0112X. • Provides a seal onto the cables inner sheath.
• Suitable for use in Mines. • Provides a cable retention and low smoke and fume, zero halogen
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 seal onto the cables outer sheath.
and IEC/EN 60079-7. • Manufactured in Brass (standard), Nickel Plated Brass or
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to 316 Stainless Steel.
IEC/EN 60529. • Brass NPT entries are nickel plated as standard.
453/T C M32 S 453/T C 1 1⁄4"NPT S
HPG01
www.ehawke.com
UPD 090610
623 Cable Glands
98
Mining

Metric Inspectable Compound • Mining.
Entry
• For use with non-armoured elastomer and plastic insulated cables.
Entry Thread

Ø 'D'
Ø 'B'
Ø 'E'

- Enclosures containing an ignition source.
CABLE GLGLAND SELECTION TABLE
Size NPT * Inner Sheath / Cores Outer Sheath 'B'
'G' Across Across
Ref. Metric Standard Max. Over Max Inner Max. No. of Standard Seal Alternative Seal (S)
Flats Corners
or Option Cores ‘D’ Sheath ‘E’ Cores Min. Max. Min. Max.
Os M20 ½" 8.0 8.0 6 3.0 8.0 - - 52.0 24.0 26.5
O M20 ½" 8.9 10.0 6 7.5 11.9 - - 52.0 24.0 26.5
A M20 ¾" or ½" 11.0 12.5 10 11.0 14.3 8.5 13.4 53.0 30.0 32.5
B M25 1" or ¾" 16.2 18.4 21 13.0 20.2 9.5 15.4 69.5 36.0 39.5
C M32 1¼" or 1" 21.9 24.7 42 19.0 26.5 15.5 21.2 64.0 46.0 50.5
C2 M40 1½" or 1¼" 26.3 29.7 60 25.0 32.5 22.0 28.0 68.3 55.0 60.6
D M50 2" or 1½" 37.1 41.7 80 31.5 44.4 27.5 34.8 79.0 65.0 70.8
E M63 2½" or 2" 47.8 53.5 100 42.5 56.3 39.0 46.5 78.9 80.0 88.0
F M75 3" or 2½" 59.0 66.2 / 65.3¹ 120 54.5 68.2 48.5 58.3 83.7 95.0 104.0

• Flameproof Exd and Increased Safety Exe I M2. • Provides a barrier seal between the individual insulated cores within
• Certificate No’s: Baseefa08ATEX0329X and IECEx BAS 08.0115X. the cable and prevents entry of the products of an explosion
• Suitable for use in Mines. into the cable.
• Construction and Test Standards: IEC/EN 60079-0, • Assembly of the cable gland compresses and distributes the
IEC/EN 60079-1 and IEC/EN 60079-7. compound evenly to create a barrier seal at the point of entry
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. into the enclosure.
• Operating Temperature Range: -60°C to +80°C. • The compound chamber may be separated from the cured
• Assembly Instruction Sheet: AI 305. compound to ensure that the chamber has been effectively
filled. If required, external voids can be repaired.
• Provides a cable retention seal onto the cables outer sheath.
• Manufactured in Brass (standard), Nickel Plated Brass or
316 Stainless Steel.
623 C M32 S 623 C 1 1⁄4"NPT S
UPD 090610
Mining 99
• Mining. Metric Inspectable Compound Armour/Braid 'C'
• For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, Entry
Entry Thread
Ø 'D'
Ø 'E'
Ø 'B'

Dimensions
Size Metric NPT * Inner Sheath / Cores Across Across
'G'
Ref. Standard Max. Over Max Inner Max. No. of Outer Sheath ‘B’ Armour / Braid ‘C’
Flats Corners
or Option Cores ‘D’ Sheath ‘E’ Cores Min Max Orientation 1 Orientation 2
Os M20 ½" 8.9 10.0 6 5.5 12.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
O M20 ½" 8.9 10.0 6 9.5 16.0 0.8 / 1.25 0.0 / 0.8 67.0 24.0 26.5
A M20 ¾" or ½" 11.0 12.5 10 12.5 20.5 0.8 / 1.25 0.0 / 0.8 67.0 30.0 32.5
B M25 1" or ¾" 16.2 18.4 21 16.9 26.0 1.25 / 1.6 0.0 / 0.7 73.6 36.0 39.5
C M32 1¼" or 1" 21.9 24.7 42 22.0 33.0 1.6 / 2.0 0.0 / 0.7 78.0 46.0 50.5
C2 M40 1½" or 1¼" 26.3 29.7 60 28.0 41.0 1.6 / 2.0 0.0 / 0.7 82.4 55.0 60.6
D M50 2" or 1½" 37.1 41.7 80 36.0 52.6 1.8 / 2.5 0.0 / 1.0 88.7 65.0 70.8
E M63 2½" or 2" 47.8 53.5 100 46.0 65.3 1.8 / 2.5 0.0 / 1.0 92.7 80.0 88.0
F M75 3" or 2½" 59.0 66.2 / 65.3¹ 120 57.0 78.0 1.8 / /2.5 0.0 / 1.0 99.4 95.0 104.0

• Flameproof Exd and Increased Safety Exe I M2. • Provides a barrier seal between the individual insulated cores
• Certificate No’s: Baseefa08ATEX0329X and IECEx BAS 08.0115X. within the cable and prevents entry of the products of an
• Suitable for use in Mines. explosion into the cable.
• Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 • Assembly of the cable gland compresses and distributes the
and IEC/EN 60079-7. compound evenly to create a barrier seal at the point of entry
• Ingress Protection: IP66, IP67 and IP 68 (30 metres into the enclosure.
for 7 days) to IEC/EN 60529. • The compound chamber may be separated from the cured
• Operating Temperature Range: -60°C to +80°C. compound to ensure that the chamber has been effectively
• Assembly Instruction Sheet: AI 301. filled. If required, external voids can be repaired.
• Provides armour clamping, using one clamping arrangement
Alternative Reversible Armour Clamping Rings (RAC) for all armour / braid types.
SELECTION TABLE • Provides a cable retention seal and low smoke and fume, zero
halogen seal onto the cables outer sheath.
Size Ref.
B 0.9 - 1.25 0.5 - 0.9 • Brass NPT entries are nickel plated as standard.
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternative Seal (AR), add suffix AR to ordering information.
HPG01
www.ehawke.com
UPD 090610
653/T Cable Glands
100
Mining

Metric Inspectable Compound Pliable Wire Armour
• Mining.
Entry
• For use with pliable wire armoured cable.
Entry Thread

Ø 'D'
Ø 'E'
Ø 'B'
Size NPT * Inner Sheath / Cores Outer Sheath 'B'

Pliable Wire 'G' Across Across
Ref. Metric Standard
Max. Over Max Inner Max. No. of Min. Armour ‘C’ Flats Corners
or Option Max.
Cores ‘D’ Sheath ‘E’ Cores
O M20 ½" 8.9 10.0 6 9.5 16.0 7 x 0.45 64.5 24.0 26.5
A M20 ¾" or ½" 11.0 12.5 10 12.5 20.5 7 x 0.45 65.3 30.0 32.5
B M25 1" or ¾" 16.2 18.4 21 16.9 26.0 7 x 0.45 71.6 36.0 39.5
C M32 1¼" or 1" 21.9 24.7 42 22.0 33.0 7 x 0.45 75.8 46.0 50.5
C2 M40 1½" or 1¼" 26.3 29.7 60 28.0 41.0 7 x 0.71 82.7 55.0 60.6
D M50 2" or 1½" 37.1 41.7 80 36.0 52.6 7 x 0.71 92.1 65.0 70.8
E M63 2½" or 2" 47.8 53.5 100 46.0 65.3 7 x 1.25 92.9 80.0 88.0
F M75 3" or 2½" 59.0 66.2 / 65.3¹ 120 57.0 78.0 7 x 1.25 99.0 95.0 104.0

• Flameproof Exd and Increased Safety Exe I M2. • Provides a barrier seal between the individual insulated cores
• Suitable for use in Mines. into the cable.
• Construction and Test Standards: IEC/EN 60079-0, • Assembly of the cable gland compresses and distributes the
compound evenly to create a barrier seal at the point of entry
IEC/EN 60079-1 and IEC/EN 60079-7. into the enclosure.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for • The compound chamber may be separated from the cured
7 days) to IEC/EN 60529. compound to ensure that the chamber has been effectively filled.
• Operating Temperature Range: -60°C to +80°C. If required, external voids can be repaired.
• Assembly Instruction Sheet: AI 346. • Provides armour clamping for pliable wire armour.
• Provides a cable retention and low smoke and fume, zero halogen
seal onto the cables outer sheath.
Cable Gland Type Size Thread Cable Gland Type Size Thread
653/T C M32 653/T C 1 1⁄4"NPT
UPD 090610
Accessories Stopping Plug:
Mining
M475 & M477 101
'L' Thread Detail 'W'

Type: M477 Markings Type: M475 Cert Detail Thread
Markings Detail
On This On This Markings On
Face Face This Face
'V'
Cert Detail
'X'
'V'
'X'
Markings
On This Face
Application
'L'
• Mining.
'W'
SELECTION TABLE • See technical section for installation rules and regulations
Features
Thread Size Hex. Key across Flats
Metric x 1.5p NPT * Size 'V' • To close unused cable gland entries and maintain the flameproof
integrity of the equipment.
M20
M25
½"
¾"
10.0
10.0
M32 1" 10.0 • M475 is fitted from the outside of the enclosure.
M40 1¼" 10.0 • M477 is fitted from the inside of the enclosure.
M50 1½" 10.0 Technical Data
M63 2" or 1½" 10.0 • Flameproof Exd & Increased Safety Exe I M2.
M75 3" 10.0 • Certificate No’s: Sira 06ATEX1240U.
All dimensions in millimetres (except * where • Suitable for use in Mines.
dimensions are in inches). • Construction and Test Standards: IEC/EN 60079-0, IEC/E60079-1
and IEC/EN 60079-7.
Ordering Information Stopping Plug Type Size • Assembly Instruction Sheet: AI 379.
Format for ordering is as follows: M475 M32 • Alternative certification options available: GOST R-Exe IIU
'T' 'N'
'S'
Blanking Flange Type:

'P'
'R'
470
'M'
'U'
'K'
Application
• Mining.
'L' 'N'
Features
SELECTION TABLE
Size Flange Dimensions
• To close unused cable gland entries and maintain the flameproof
Ref. K L M N P R S T U integrity of the equipment.
O 44.4 12.7 19.05 26.1 6.7 11.1 7.0 30 70.0 • Manufactured in Brass (standard), Nickel Plated Brass or
A 44.4 12.7 19.05 26.1 6.7 11.1 7.0 30 70.0
B 57.1 12.7 25.40 26.1 6.7 11.1 7.0 36 82.5
Technical Data
C 69.8 14.3 31.75 27.7 9.1 15.1 8.7 46 98.4 • Flameproof Exd I M2.
C2 82.5 14.3 38.10 27.7 9.1 15.1 8.7 55 111.1 • Certificate No’s: Baseefa08ATEX0333U and IECEx BAS 08.0013U
• Suitable for use in Mines.
D 95.2 17.5 50.80 29.3 11.1 18.1 10.5 65 130.2
• Construction and Test Standards: IEC/EN 60079-0 and IEC/EN 60079-1.
E 114.3 17.5 63.50 29.3 11.1 18.1 10.5 80 149.3
F 127.0 17.5 76.20 32.5 11.1 20.5 13.5 95 162.0 • Assembly Instruction Sheet: AI 345.
SELECTION TABLE
Equipment Entry Hole Size
• Alternative certification options available: GOST R-Exe IIU
Size Ref. Ordering Information
Max Min
O/A 19.35 19.10 Format for ordering is as follows:
B 25.70 25.45
Blanking Flange Type Size Blanking Flange Type Size
C 32.05 31.80
C2 38.40 38.15 470 C 470 C
D 51.10 50.85
E 63.80 63.55
F 76.50 76.25
All dimensions in millimetres.
www.ehawke.com
UPD 160913
Adaptor Flange Cable Glands
Mining
102
Type: 483 Flameproof Exd & Increased Safety Exe
'T' 'N'
'S'
'R'
'P'
'K'
'U'
'W'
'M'
'V'
Application
• Mining.
'L' Features
'N'
• To allow metric threaded Group 1 cable gland types: 653/UNIV,
SELECTION TABLE 653/T, 653, 623, 453/UNIV, 453/T, 453/RAC and 453 to be used in
Equipment Entry Hole Size size up spigot entries.
Size Ref.
Max Min • Manufactured in Brass (standard), Nickel Plated Brass or
O 25.70 25.45 316 Stainless Steel.
A 25.70 25.45 Technical Data
B 32.05 31.80 • Flameproof Exd I M2.
C 38.40 38.15 • Certificate No’s: Baseefa08ATEX0333U and IECEx BAS 08.0013U
C2 51.10 50.85 • Suitable for use in Mines.
D 63.80 63.55 • Construction and Test Standards: IEC/EN 60079-0 and
IEC/EN 60079-1.
E 76.50 76.25
F 76.50 76.25 • Assembly Instruction Sheet: AI 344.
All dimensions in millimetres. • Alternative certification options available:
GOST R-Exe IIU
SELECTION TABLE
Flange Dimensions Casting
Size Ref.
K L M N P R S T U V W Size
O 57.1 12.7 25.40 26.1 6.7 11.1 7.0 36 82.5 M20 20.0 B
A 57.1 12.7 25.40 26.1 6.7 11.1 7.0 36 82.5 M20 20.0 B
B 69.8 14.3 31.75 27.7 9.1 15.1 8.7 46 98.4 M25 25.4 C
C 82.5 14.3 38.10 27.7 9.1 15.1 8.7 55 111.1 M32 32.0 C2
C2 95.2 17.5 50.80 29.3 11.1 18.1 10.5 65 130.2 M40 40.0 D
D 114.3 17.5 63.50 29.3 11.1 18.1 10.5 80 149.3 M50 50.7 E
E 127.0 17.5 76.20 32.5 11.1 20.5 13.5 95 162.0 M63 63.4 F
F 127.0 17.5 76.20 48.0 11.1 20.5 13.5 95 162.0 M75 66.0 F
All dimensions in millimetres.
Adaptor Flange Type Size Adaptor Flange Type Size
483 C 483 C
A 484 Flanged Adaptor option is also available which allows metric threaded Group 1 cable gland types 653/UNIV, 653/T, 653, 623, 453/UNIV, 453/T, 453/RAC
and 453 to be fitted into a size for size spigot entry.
Cable Glands - 103
American Series - NEC/IEC

104
North American Cable Glands/Connectors
Explosion Proof & General Purpose
Cable Gland/Connector Type 711 1
1 Unique Rear Sealing System 3 Inspectable Deluge Seal

This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), Hawke’s Inspectable deluge seal offers IP66 and IP67 sealing
NEMA 4X and Deluge (DTS01) Ingress Protection. The seal and is certified as ‘deluge proof’ by ITS in accordance with
is manufactured from a silicone material, has LSFZH properties, DTS01. Indeed, Hawke’s deluge seal is so good that it
is ozone and oil resistant and is suitable for use at both high exceeds the expectations of the offshore industry by not
and low temperatures. The Rear Sealing System covers the entire only preventing ingress into the equipment, but also into
range of cable diameters without the need for special seals and the cable gland, which could potentially corrode the
the cable acceptance range is stamped on the backnut for cable armour.
ease of inspection. The backnut can be hand tightened, with
only one further spanner turn required to ensure IP66, IP67, IP68
and NEMA 4X.
2 Armour Grounding Device
This device provides 360° armour grounding which is
fully Inspectable. The grounding device is unique in that
it remains in contact with the metal cable jacket when
the cable gland /connector is disassembled for inspection.
Cable Glands 710
North American Cable Glands/Connectors 105
Explosion Proof
IECEx and ATEX Approved Flameproof Exd,
Increased Safety Exe and Restricted Breathing ExnR
(Note: Dual Marked UL & ATEX as standard).
'G' Approx (Fully Compressed Length)
Compound
Application
Entry Thread
• For use with non-armoured cable, as permitted by the NEC.
Ø 'D'
Ø 'B'
Ø 'E'
Size Ref. NPT Metric * Inner Jacket / Cores Outer Jacket 'B' 'G' Across Flats Across
Standard Max. Over Max Inner Max. No. of
Min. Max. Corners
or Option Cores ‘D’ Jacket ‘E’ Cores
Os ½" M20¹ 0.35" 0.39" 6 0.22" 0.47" 2.55" 0.94" 1.04"
O ½" M20¹ 0.35" 0.39" 6 0.37" 0.63" 2.55" 0.94" 1.04"
A ½" or ¾" M20 0.43" 0.64" 10 0.49" 0.81" 2.59" 1.18" 1.28"
B ¾" or1" M25 0.64" 0.93" 21 0.66" 1.02" 2.80" 1.42" 1.56"
C 1" or 1¼" M32 0.86" 1.23" 42 0.87" 1.30" 2.99" 1.81" 1.99"
C2 1¼" or 1½" M40 1.04" 1.59" 60 1.10" 1.61" 3.18" 2.17" 2.36"
D 2" or 1½" M50 1.46" 1.96" 80 1.42" 2.07" 3.60" 2.56" 2.79"
E 2½" or 2" M63 1.88" 2.55" 100 1.81" 2.57" 3.59" 3.15" 3.46"
F 3" or 2½" M75 2.32" 2.98" 120 2.24" 3.07" 3.99" 3.74" 4.09"
H² 3½" M90 2.79" 3.12" 120 3.07" 3.52" 3.54 4.18" 4.84"
All dimensions in inches (except * where dimensions are in millimetres). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of
thread. For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please
specify when ordering
¹ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43”.
² UL approved only

• UL Listing No: E84940. • Provides a barrier seal between the individual insulated conductors
• Suitable for use in: within the cable and prevents entry of the products of an
• Class 1, Division 2, Gas Groups A, B, C and D explosion into the cable.
• Class 1, Zone 2, Gas Groups IIA, IIB and IIC • Assembly of the cable gland compresses and distributes
• AExd IIC and AExe II Class 1, Zone 2. the compound evenly to effect a barrier seal at the point
• Flameproof Exd, Increased Safety Exe II 2 GD and Restricted of entry into the enclosure.
Breathing ExnR II 3G. • Provides an outer deluge seal to prevent moisture
• Certificate No’s: Sira 06ATEX1295X and IECEx SIR 06.0082X. ingress to the cable
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 armour and enclosure. Deluge seal is coloured red to
and in Gas Groups IIA, IIB and IIC. indicate Hazardous Location product.
• Construction and Test Standards: UL 2225, IEC/EN 60079-0, • Provides a cable retention and low smoke and fume,
IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 zero halogen seal onto the cables outer jacket.
and IEC/EN 61241-1. • Manufactured in Brass (standard), Nickel Plated Brass,
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to 316 Stainless Steel or Aluminium.
IEC/EN 60529 and NEMA 4X. • Brass NPT entries are nickel plated as standard.
• Operating Temperature Range: -50°C to +60°C (UL) and -60°C to
+80°C (ATEX / IECEx).
• Assembly Instruction Sheet: AI 316 (UL) and AI 391 (ATEX / IECEx).
Cable Gland / ConnectorType Size Thread
710 C 1"NPT
HPG01
www.ehawke.com
UPD 090610
711 (& 713) Cable Glands
106
Explosion Proof
'G' Approx (Fully Compressed Length) (Note: Dual Marked UL & ATEX as standard).
Compound Deluge Boot
Application
A
Entry Thread

Ø 'D'
Ø 'B'
Ø 'E'
• For use with continuous corrugated aluminium Metal Clad (MCHL) cable.

Inner Jacket / Cores Outer Jacket 'B'
NPT
Size Ref. Armour 'G' Across
Standard Metric * Max. Over Max. No. of Across Flats
Jacket ‘E’ Min. Max. Corners
or Option Cores ‘D’ Cores
Min. Max.
A ½" or ¾" M20 0.43" 0.41" 0.64" 10 0.49" 0.81" 2.44" 1.18" 1.28"
B ¾" or 1" M25 0.64" 0.49" 0.93" 21 0.66" 1.02" 2.68" 1.42" 1.56"
C 1" or 1¼" M32 0.86" 0.85" 1.23" 42 0.87" 1.30" 2.76" 1.81" 1.99"
C2 1¼" or 1½" M40 1.04" 1.17" 1.59" 60 1.10" 1.61" 2.96" 2.17" 2.36"
D 2" or 1½" M50 1.46" 1.37" 1.96" 80 1.42" 2.07" 3.18" 2.56" 2.79"
E 2½" or 2" M63 1.88" 1.76" 2.55" 100 1.81" 2.57" 3.21" 3.15" 3.46"
F 3" or 2½" M75 2.32" 2.29" 2.98" 120 2.24" 3.07" 3.54" 3.74" 4.09"
H¹ 3½" M90 2.79" 2.93" 3.47" 120 3.07" 3.52" 4.33" 4.18" 4.84"
All dimensions in inches (except * where dimensions are in millimetres). A - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify
when ordering
¹ UL approved only.

• UL Listing No: E84940. • Provides 360° armour grounding which is fully Inspectable.
• Suitable for use in: • Grounding Device remains in contact with cable when
• Class 1, Division 1, Gas Groups A, B, C and D disassembled for inspection.
• Class 1, Zone 2, Gas Groups IIA, IIB and IIC • Provides a barrier seal between the individual insulated
• AExd IIC and AExe II Class 1, Zone 2. conductors within the cable and prevents entry of the
• Flameproof Exd, Increased Safety Exe II 2 GD and Restricted products of an explosion into the cable.
Breathing ExnR II 3G. • Assembly of the cable gland compresses and distributes the
• Certificate No’s: Sira 06ATEX1295X and IECEx SIR 06.0082X. compound evenly to effect a barrier seal at the point of entry
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas into the enclosure.
Groups IIA, IIB and IIC. • Provides an outer deluge seal to prevent moisture ingress
• Construction and Test Standards: UL 2225, IEC/EN 60079-0, to the cable armour and enclosure. Deluge seal is coloured red
IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 to indicate Hazardous Location product.
and IEC/EN 61241-1. • Provides a cable retention and low smoke and fume, zero
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to halogen seal onto the cables outer jacket.
IEC/EN 60529 and NEMA 4X. • Manufactured in Brass (standard), Nickel Plated Brass,
• Deluge Protection to DTS01. 316 Stainless Steel or Aluminium.
• Operating Temperature Range: -50°C to +60°C (UL) and -60°C to • Brass NPT entries are nickel plated as standard.
Cable Gland / Connector Type Size Thread
711 C 1" NPT
UPD 090610
Cable Glands 753
Explosion Proof
(Note: Dual Marked UL & ATEX as standard). 'G' Approx (Fully Compressed Length)
Nickel Plated Compound Braid 'C'
Hub
Application
Entry Thread
• For use with braid armoured marine shipboard jacketed or
Ø 'B'
Ø 'D'
Ø 'E'
non-jacketed cable.
Size NPT * Inner Jacket / Cores Outer Jacket 'B'
Braid ‘C’ 'G' Across Across
Ref. Standard Metric Max. Over Max Inner Max. No. of
Min. Max. Flats Corners
or Option Cores ‘D’ Jacket ‘E’ Cores
Os ½" M20² 0.35" 0.46" 6 0.22" 0.47" 0.008" / 0.013" 2.61" 0.94" 1.09"
O ½" M20² 0.35" 0.46" 6 0.37" 0.63" 0.008" / 0.013" 2.61" 0.94" 1.09"
A ½" or ¾" M20 0.43" 0.49" 10 0.49" 0.81" 0.008" / 0.013" 2.65" 1.18" 1.36"
B ¾" or 1" M25 0.64" 0.72" 21 0.66" 1.02" 0.008" / 0.013" 2.75" 1.42" 1.64"
C 1" or 1¼" M32 0.86" 0.97" 42 0.87" 1.30" 0.008" / 0.013" 2.93" 1.81" 2.09"
C2 1¼" or 1½" M40 1.04" 1.16" 60 1.10" 1.61" 0.008" / 0.013" 3.15" 2.17" 2.50"
D 2" or 1½" M50 1.46" 1.64" 80 1.42" 2.07" 0.008" / 0.013" 3.14" 2.56" 2.96"
E 2½" or 2" M63 1.88" 2.11" 100 1.81" 2.57" 0.008" / 0.013" 3.42" 3.15" 3.64"
F 3" or 2½" M75 2.32" 2.61 / 2.57" ¹ 120 2.24" 3.07" 0.008" / 0.013" 3.61" 3.74" 4.31"
H³ 3½" M90 2.79" 3.05" 120 3.07" 3.52" 0.008" / 0.013" 3.54" 4.18" 4.84"
¹ Smaller value is applicable when selecting standard NPT entry option.

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43”
³ UL approved only.

• Class 1, Zone 2, Gas Groups IIA, IIB and IIC • Assembly of the cable gland compresses and distributes the
• AExd IIC and AExe II Class 1, Zone 2. compound evenly to effect a barrier seal at the point of entry
• Flameproof Exd, Increased Safety Exe II 2 GD and Restricted into the enclosure.
Breathing ExnR II 3G. • Provides an outer deluge seal to prevent moisture ingress to
• Certificate No’s: Sira 06ATEX1295X and IECEx SIR 06.0082X. the cable armour and enclosure. Deluge seal is coloured red to
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in indicate Hazardous Location product.
• Construction and Test Standards: UL 2225, IEC/EN 60079-0, seal onto the cables outer jacket.
IEC/EN 60079-1, EC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and • Manufactured in Brass (standard), Nickel Plated Brass,
IEC/EN 61241-1. 316 Stainless Steel or Aluminium.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Brass NPT entries are nickel plated as standard.
• Operating Temperature Range: -50°C to +60°C (UL) and -60°C
to +80°C (ATEX / IECEx).
• Assembly Instruction Sheet: AI 318/339 (UL) and AI 373 (ATEX / IECEx).
GOST R-Exe IIU
753 C 1" NPT
HPG01
www.ehawke.com
UPD 090610
755 Cable Glands
108
Explosion Proof
(Note: Dual Marked UL & ATEX as standard).
Nickel Plated Compound Armour 'C'
Hub
Application
Entry Thread
• For use with armoured jacketed cable, as permitted by the NEC.

Ø 'D'
Ø 'E'
Ø 'B'

Hexagon
Entry Thread Size Cable Acceptance Details Dimensions
Inner Jacket / Cores Outer Jacket ‘C’
Size 'B'
NPT 'G'
Ref. Max. Max. 3 Across Across
Standard Metric*
Over Max Inner No. of Steel Wire Flats Corners
or Option Min. Max. Braid Tape
Cores Jacket ‘E’ Cores Armour
‘D’
Os ½" M20² 0.35" 0.46" 6 0.22" 0.47" 0.036" / 0.049" 0.008" / 0.013" 0.008" / 0.031" 2.61" 0.94" 1.09"
O ½" M20² 0.35" 0.46" 6 0.37" 0.63" 0.036" / 0.049" 0.008" / 0.013" 0.008" / 0.031" 2.61" 0.94" 1.09"
A ½" or ¾" M20 0.43" 0.49" 10 0.49" 0.81" 0.036" / 0.049" 0.008" / 0.013" 0.008" / 0.031" 2.65" 1.18" 1.36"
B ¾" or 1" M25 0.64" 0.72" 21 0.66" 1.02" 0.049" / 0.062" 0.008" / 0.013" 0.008" / 0.039" 2.75" 1.42" 1.64"
C 1" or 1¼" M32 0.86" 0.97" 42 0.87" 1.30" 0.062" / 0.078" 0.008" / 0.013" 0.008" / 0.055" 2.93" 1.81" 2.09"
C2 1¼" or 1½" M40 1.04" 1.16" 60 1.10" 1.61" 0.062" / 0.078" 0.008" / 0.013" 0.008" / 0.070" 3.15" 2.17" 2.50"
D 2" or 1½" M50 1.46" 1.64" 80 1.42" 2.07" 0.078" / 0.098" 0.008" / 0.013" 0.008" / 0.070" 3.14" 2.56" 2.96"
E 2½" or 2" M63 1.88" 2.11" 100 1.81" 2.57" 0.098" 0.008" / 0.013" 0.008" / 0.070" 3.42" 3.15" 3.64"
F 3" or 2½" M75 2.32" 2.61 / 2.57" ¹ 120 2.24" 3.07" 0.098" 0.008" / 0.013" 0.008" / 0.070" 3.61" 3.74" 4.31"
All dimensions in inches (except * where dimensions are in millimetres). Metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
¹ Smaller value is applicable when selecting standard NPT entry option.

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43
3
UL listing only applies to Steel Wire Armour.
• Class 1, Zone 2, Gas Groups IIA, IIB and IIC • Assembly of the cable gland compresses and distributes the
• AExd IIC and AExe II Class 1, Zone 2. compound evenly to effect a barrier seal at the point of entry
• Flameproof Exd, Increased Safety Exe II 2 GD and Restricted into the enclosure.
Breathing ExnR II 3G. • Provides an outer deluge seal to prevent moisture ingress to the
• Certificate No’s: Sira 06ATEX1295X and IECEx SIR 06.0082X. cable armour and enclosure. Deluge seal is coloured red to
• Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in indicate Hazardous Location product.
• Construction and Test Standards: UL 2225, IEC/EN 60079-0, seal onto the cables outer jacket.
IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and
IEC/EN 61241-1.
• Manufactured in Brass (standard), Nickel Plated Brass,
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to • Brass NPT entries are nickel plated as standard.
IEC/EN 60529 and NEMA 4X.
• Operating Temperature Range: -50°C to +60°C (UL) and -60°C to
GOST R-Exe IIU
755 C 1" NPT
UPD 090610
Cable Glands 153/X
General Purpose

Nickel Braid 'C'
Plated Hub
Application
Entry Thread
• For use with armoured marine shipboard jacketed or
Ø 'A'
Ø 'B'
non-jacketed cable.
Size Standard Seal Alternative Seal (S) Outer Jacket ‘B’
NPT Standard 'G' Across Across
Ref. Metric * Braid ‘C’
or Option Min. Max. Min. Max. Min. Max. Flats Corners
Os ½" M20² 0.12" 0.31" - - 0.22" 0.47" 0.008" / 0.013" 2.04" 0.94" 1.04"
O ½" M20² 0.30" 0.46" - - 0.37" 0.63" 0.008" / 0.013" 2.04" 0.94" 1.04"
A ½" or ¾" M20 0.44" 0.56" 0.34" 0.52" 0.49" 0.81" 0.008" / 0.013" 2.08" 1.18" 1.28"
B ¾" or 1" M25 0.52" 0.79" 0.38" 0.60" 0.66" 1.02" 0.008" / 0.013" 2.74" 1.42" 1.55"
C 1" or 1¼" M32 0.75" 1.04" 0.61" 0.83" 0.87" 1.30" 0.008" / 0.013" 2.52" 1.81" 1.98"
C2 1¼" or 1½" M40 0.99" 1.27" 0.87" 1.10" 1.10" 1.61" 0.008" / 0.013" 2.69" 2.17" 2.38"
D 2" or 1½" M50 1.24" 1.74" / 1.67" ¹ 1.09" 1.37" 1.42" 2.07" 0.008" / 0.013" 3.11" 2.56" 2.78"
E 2½" or 2" M63 1.68" 2.21" / 2.14" ¹ 1.54" 1.83" 1.81" 2.57" 0.008" / 0.013" 3.10" 3.15" 3.46"
F 3" or 2½" M75 2.15" 2.67" / 2.57" ¹ 1.91" 2.29" 2.24" 3.07" 0.008" / 0.013" 3.29" 3.74" 4.09"
H 3½" or 3" M90 2.64" 3.06" - - 2.96" 3.52" 0.008" / 0.013" 4.80" 4.53" 5.23"

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43”
³ UL approved only.

• UL Listed for use Wet Locations. • Provides armour clamping for marine shipboard cable.
• UL Listing No: E218332. • Provides a seal on the cables inner jacket.
• Construction and Test Standards: UL 514B. • Provides an outer deluge seal to prevent moisture ingress to the
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) cable armour and enclosure. Deluge seal is coloured black to
to IEC/EN 60529 and NEMA 4X. indicate General Purpose product.
• Deluge Protection to DTS01. • Provides a cable retention and low smoke and fume, zero
• Operating Temperature Range: -50°C to +60°C. halogen seal onto the cables outer jacket.
• Assembly Instruction Sheet: AI 341. • Manufactured in Brass (standard), Nickel Plated Brass,
• Alternative certification options available: 316 Stainless Steel or Aluminium.
DNV Marine Approval ABS Marine Approval • Brass NPT entries are nickel plated as standard.
Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information.
Cable Gland / Size Thread (OPTIONAL) Cable Gland / Size Thread (OPTIONAL)
Connector Type Connector Type
153 CX M32 S 153 CX 1"NPT S
HPG01
www.ehawke.com
UPD 090610
701 Cable Glands
110
General Purpose
Armour Stop 'G' Approx (Fully Compressed Length)

Deluge Boot Armour Grounding Device
Nickel Plated
Hub Application
Entry Thread
• For use with continuous corrugated aluminium and interlocked steel

Ø 'E'
Ø 'B'
Metal Clad MC and Teck type cables.

NPT Armour Jacket ‘E’ Outer Jacket ‘B’
Size Ref. 'G' Across Across
Standard or Metric *
Min. Max. Min. Max. Flats Corners
Option
A ½" or ¾" M20 0.41" 0.64" 0.49" 0.81" 2.44" 1.18" 1.28"
B ¾" or 1" M25 0.49" 0.93" 0.66" 1.02" 2.68" 1.42" 1.56"
C 1" or 1¼" M32 0.85" 1.23" 0.87" 1.30" 2.76" 1.81" 1.99"
C2 1¼" or 1½" M40 1.17" 1.59" 1.10" 1.61" 2.96" 2.17" 2.36"
D 2" or 1½" M50 1.37" 1.96" 1.42" 2.07" 3.18" 2.56" 2.79"
E 2½" or 2" M63 1.76" 2.55" 1.81" 2.57" 3.21" 3.15" 3.46"
F 3" or 2½" M75 2.29" 2.98" 2.24" 3.07" 3.54" 3.74" 4.09"
H 3½" M90 2.93" 3.47" 3.07" 3.52" 4.33" 4.18" 4.84"
All dimensions in inches (except * where dimensions are in millimetres). A - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.
For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify
when ordering

• UL Listed for use Wet Locations. • Provides 360° armour grounding which is fully Inspectable.
• Certificate / Listing No: E165706. • Grounding Device remains in contact with cable when disassembled
• Construction and Test Standards: UL 514B. for inspection.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Provides an outer deluge seal to prevent moisture ingress to the
to IEC/EN 60529 and NEMA 4X. cable armour and enclosure. Deluge seal is coloured black to indicate
• Deluge Protection to DTS01. General Purpose product.
• Operating Temperature Range: -50°C to +60°C. •
• Assembly Instruction Sheet: AI 315/342. Provides a cable retention and low smoke and fume, zero halogen
• Alternative certification options available: seal onto the cables outer jacket.


701 C 1" NPT
UPD 090610
Cable Glands - 111
Industrial
112
Industrial
1 Unique Rear Sealing System Optional Inspectable Deluge Seal

This arrangement offers IP66, IP67, IP68 (30 metres for 7 Hawke’s Inspectable deluge seal offers IP66 and IP67 sealing
days), NEMA 4X and Deluge (DTS01) Ingress Protection. The and is certified as ‘deluge proof’ by ITS in accordance with
seal is manufactured from a silicone material, has LSFZH DTS01. Indeed, Hawke’s deluge seal is so good that it
properties, is ozone and oil resistant and is suitable for use exceeds the expectations of the offshore industry by not
at both high and low temperatures. The Rear Sealing System only preventing ingress into the equipment, but also into
covers the entire range of cable diameters without the need the cable gland, which could potentially corrode the
for special seals and the cable acceptance range is stamped cable armour.
on the backnut for ease of inspection. The backnut can be
hand tightened, with only one further spanner turn required
to ensure IP66, IP67, IP68 and NEMA 4X.
2 The Original Reversible Armour Clamp
over 10 years ago and is a well established proven performer
in all conditions. Simply by reversing the clamping ring,
the cable gland can adjust to accommodate all types of
cable armour or braid. Unlike many of our competitors,
the correct stamping orientation is marked clearly with a
‘W’, ‘Z’ or ‘X' and backed up by the presence of a groove in
the component. Hawke’s RAC clamping system is also fully
Inspectable when positioned on the cable.
Cable Glands 121
Industrial 113
15.0mm (Fully Compressed Length)
'G' Approx
Metric
Entry
Entry Thread
Application
Ø 'B'

NPT * Outer Sheath ‘B’
Size Ref. Standard Seal Alternative Seal (S) 'G' Across Across
Metric Standard or
Flats Corners
Option Min. Max. Min. Max.
2K M16 - 3.0 8.0 - - 23.5 19.0 21.2
Os M20² ½" 3.0 8.0 - - 23.8 24.0 26.5
O M20² ½" 7.5 11.9 - - 23.8 24.0 26.5
A M20 ¾" or ½" 11.0 14.3 8.5 13.4 24.8 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 25.8 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 15.5 21.2 28.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 29.5 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 40.4 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 38.2 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 40.5 95.0 104.0
G M80 3½" 67.0 73.0 - - 41.0 106.4 115.0
H M90 3½" 67.0 77.6 - - 41.0 115.0 130.0
J M100 4" 75.0 91.6 - - 41.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). 2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.


• Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type A2. • Provides a cable retention seal onto the cables outer sheath.
to IEC/EN 60529. 316 Stainless Steel or Aluminium.
121 C M32 S 121 C 1 1⁄4"NPT S
HPG01
www.ehawke.com
UPD 090610
123 Cable Glands
114
Industrial

Metric
Entry
Application
Entry Thread
Ø 'B'
• May be used on cables incorporating inner and outer cable sheath at
two independent sealing points.

NPT * Outer Sheath ‘B’
Size Ref. Standard Seal Alternative Seal (S) 'G' Across Across
Metric Standard or
Flats Corners
Option Min. Max. Min. Max.
Os M20² ½" 3.0 8.0 - - 40.0 24.0 26.5
O M20² ½" 7.5 11.9 - - 40.0 24.0 26.5
A M20 ¾" or ½" 11.0 14.3 8.5 13.4 40.4 30.0 32.5
B M25 1" or ¾" 13.0 20.2 9.5 15.4 44.3 36.0 39.5
C M32 1¼" or 1" 19.0 26.5 15.5 21.2 47.2 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 49.5 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 72.5 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 64.8 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 68.0 95.0 104.0
G M80 3½" 67.0 73.0 - - 68.0 106.4 115.0
H M90 3½" 67.0 77.6 - - 68.0 115.0 130.0
J M100 4" 75.0 91.6 - - 68.0 127.0 142.0


• Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type A2. • Provides a cable retention seal onto the cables outer sheath.
to IEC/EN 60529. 316 Stainless Steel or Aluminium.
123 C M32 S 123 C 1 1⁄4"NPT S
UPD 090610
Industrial 115

Optional
Application Metric Deluge Seal Diaphragm Seal Armour/Braid 'C'
• Outdoor or indoor use. Entry
• For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip
Entry Thread
armour‘Y’, and steel tape armour‘Z’elastomer and plastic insulated cables.
Ø 'B'
Ø 'A'
• Cables that exhibit ‘Cold Flow’ characteristics.

Metric Standard or
Os M20² ½" 3.0 8.1 5.5 12.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
O M20² ½" 6.5 11.5 9.5 16.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
A M20 ¾" or ½" 8.4 14.3 12.5 20.5 0.8 / 1.25 0.0 / 0.8 63.0 30.0 32.5
B M25 1" or ¾" 11.1 19.7 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.9 36.0 39.5
C M32 1¼" or 1" 17.6 26.5 22.0 33.0 1.6 / 2.0 0.0 / 0.7 73.2 46.0 50.5
C2 M40 1½" or 1¼" 23.1 32.5 28.0 41.0 1.6 / 2.0 0.0 / 0.7 77.9 55.0 60.6
D M50 2" or 1½" 28.9 44.4 / 42.3¹ 36.0 52.6 1.8 / 2.5 0.0 / 1.0 93.5 65.0 70.8
E M63 2½" or 2" 39.9 56.3 / 54.3¹ 46.0 65.3 1.8 / 2.5 0.0 / 1.0 94.0 80.0 88.0
F M75 3" or 2½" 50.5 68.2 / 65.3¹ 57.0 78.0 1.8 / 2.5 0.0 / 1.0 103.0 95.0 104.0
G M80 3½" 67.0 73.0 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 106.4 115.0
H M90 3½" 67.0 77.6 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 115.0 130.0
J M100 4" 75.0 91.6 88.0 104.5 2.5 / 4.0 0.0 / 1.0 90.6 127.0 142.0
specify when ordering. G size and above are available in the 153/RAC design style.


• Construction and Test Standards: EN 50262, BS 6121 : Part 1 • Provides armour clamping using one clamping arrangement for
Type E1W, E1X, E1Y and E1Z. all armour / braid types.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Provides a diaphragm seal on the cables inner sheath
to IEC/EN 60529. which will not damage cable that has ‘Cold Flow’ characteristics.
• Deluge Protection to DTS01. • Provides an outer deluge seal to prevent moisture ingress to the
• Operating Temperature Range: -60°C to +80°C. cable armour / braid.
• Assembly Instruction Sheet: AI 372 (Sizes Os to F) and • Provides a cable retention and low smoke and fume, zero halogen
AI 303 (Sizes G to J). seal onto the cables outer sheath.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternate Seal (AR), add suffix AR to ordering information.
HPG01
www.ehawke.com
UPD 090610
116
Industrial

Metric Armour/Braid 'C'
Entry
Application
Applicati
Entry Thread
• Ou
Outd
Outdoor
tdoo
oorr or indoor use.
Ø 'A'
• FForor uusese wwith single wire armour ‘W’, wire braid ‘X’, aluminium strip armour‘Y’
Ø 'B'
and steel tape armour ‘Z’ elastomer and plastic insulated cables.

Size NPT * Inner Sheath ‘A’ Outer Sheath 'B' Armour / Braid ‘C’
'G' Across Across
Ref. Metric Standard or Alternative Seal Orientation Orientation
Standard Seal Min. Max. Flats Corners
Option (S) 1 2
Os M20² ½" 3.0 8.0 - - 5.5 12.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
O M20² ½" 6.5 11.9 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" 10.0 14.3 8.5 13.4 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 12.5 20.2 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.5 36.0 39.5
C M32 1¼" or 1" 19.0 26.53 14.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 32.5 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 44.4 / 42.3¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 56.3 / 54.3¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.9 80.0 88.0
F M75 3" or 2½" 54.5 68.2 / 65.3¹ 48.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 67.0 73.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 67.0 77.6 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 75.0 91.6 - - 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0


• Construction and Test Standards: EN 50262, BS 6121 : Part 1 • Provides armour clamping using one clamping arrangement
Type E1W, E1X, E1Y and E1Z. for all armour / braid types.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to • Provides a seal on the cables inner sheath.
IEC/EN 60529 and NEMA 4X. • Provides a cable retention and low smoke and fume, zero halogen
• Operating Temperature Range: -60°C to +80°C. • Manufactured in Brass (standard), Nickel Plated Brass,
• Assembly Instruction Sheet: AI 399. 316 Stainless Steel or Aluminium.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Alternate Clamping Ring (AR), add suffix AR to ordering information. Alternate Seal (S), add suffix S
to ordering information.
153/RAC C M32 S 153/RAC C 1 1⁄4"NPT S
UPD 090610
Cable Glands 153/RAC/L
Industrial ((for
o Lead
ead Sheath
S eat Cab
Cables)
es) 117

Metric Lead Sheath Bond Armour/Braid 'C'
Entry
Application
Entry Thread
Ø 'A'
Ø 'B'
armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated
cables.

Hexagon
Dimensions
NPT * Outer Sheath Armour / Braid ‘C’ 'G'
Ref. Standard (L) Alternative Seal (K) Across Across
Metric Standard or ‘B’
Seal + Bond Seal + Bond Flats Corners
Option
O M20² ½" 6.5 10.5 - - 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" - - 8.5 13.4 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 12.5 19.0 9.5 15.4 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.5 36.0 39.5
C M32 1¼" or 1" 19.0 25.0 14.5 21.2 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 25.0 31.2 22.0 28.0 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 31.5 42.3 / 42.8¹ 27.5 34.8 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 42.5 53.3 / 54.5¹ 39.0 46.5 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.9 80.0 88.0
F M75 3" or 2½" 54.5 66.0 / 64.3¹ 48.5 58.3 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 67.0 70.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 67.0 75.0 - - 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 75.0 89.5 - - 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). O - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread.


• Construction and Test Standards: EN 50262, BS 6121 : Part 1 • Provides armour clamping using one clamping arrangement for all
Type E2W, E2X, E2Y and E2Z. armour / braid types.
• Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) • Provides a seal and an electrical bond on the cables inner sheath.
to IEC/EN 60529 and NEMA 4X. • Provides a cable retention and low smoke and fume, zero halogen
• Operating Temperature Range: -60°C to +80°C. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless
• Assembly Instruction Sheet: AI 399 and AI 336. Steel or Aluminium.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
Format for ordering is as follows: Standard Inner Seal + Bond, add suffix L to ordering information. Alternative Inner Seal + Bond, add suffix K
to ordering information. Alternative Clamping Ring (AR), add suffix AR to ordering information.
Cable Gland Size Thread Lead (OPTIONAL) Cable Gland Size Thread Lead (OPTIONAL) Cable Gland Size Thread Lead (OPTIONAL)
Type Type Type
153/RAC C M32 L AR 153/RAC C 1 1⁄4"NPT L AR 153/RAC C 1 1⁄4"NPT K AR
HPG01
www.ehawke.com
UPD 090610
118
Industrial

Armour/Braid 'C'
Metric
Entry
Application
Entry Thread
• Indoor use.
Ø 'A'
Ø 'B'
armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

Hexagon
Dimensions
Size Ref. Inner Sheath Outer 'G'
NPT * Armour / Braid ‘C’ Across Across
Metric ‘A’ Sheath ‘B’
Standard or Flats Corners
Option Max. Max. Orientation 1 Orientation 2
O M20² ½" 11.9 16.0 0.8 / 1.25 0.0 / 0.8 37.0 24.0 26.5
A M20 ¾" or ½" 14.3 20.5 0.8 / 1.25 0.0 / 0.8 38.2 30.0 32.5
B M25 1" or ¾" 20.2 26.0 1.25 / 1.6 0.0 / 0.7 42.7 36.0 39.5
C M32 1¼" or 1" 26.5 33.0 1.6 / 2.0 0.0 / 0.7 46.9 46.0 50.5
C2 M40 1½" or 1¼" 32.5 41.0 1.6 / 2.0 0.0 / 0.7 49.9 55.0 60.6
D M50 2" or 1½" 44.4 / 42.3¹ 52.6 1.8 / 2.5 0.0 / 1.0 63.5 65.0 70.8
E M63 2½" or 2" 56.3 / 54.3¹ 65.3 1.8 / 2.5 0.0 / 1.0 60.4 80.0 88.0
F M75 3" or 2½" 68.2 / 65.3¹ 78.0 1.8 / 2.5 0.0 / 1.0 63.2 95.0 104.0


Type BW, BX, BY and BZ. armour / braid types.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
UPD 090610
Cable Glands 151/RAC
Industrial 119

Armour/Braid 'C'
Metric
Entry
Application
Entry Thread
Ø 'A'
Ø 'B'
armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

Hexagon
Dimensions
Size Ref. NPT * Inner 'G'
Outer Sheath ‘B’ Armour / Braid ‘C’ Across Across
Metric Standard Sheath ‘A’
Flats Corners
or Option Max. Min. Max. Orientation 1 Orientation 2
Os M20² ½" 8.0 5.5 12.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
O M20² ½" 11.9 9.5 16.0 0.8 / 1.25 0.0 / 0.8 52.0 24.0 26.5
A M20 ¾" or ½" 14.3 12.5 20.5 0.8 / 1.25 0.0 / 0.8 53.0 30.0 32.5
B M25 1" or ¾" 20.2 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.5 36.0 39.5
C M32 1¼" or 1" 26.5 22.0 33.0 1.6 / 2.0 0.0 / 0.7 64.0 46.0 50.5
C2 M40 1½" or 1¼" 32.5 28.0 41.0 1.6 / 2.0 0.0 / 0.7 68.3 55.0 60.6
D M50 2" or 1½" 44.4 / 42.3¹ 36.0 52.6 1.8 / 2.5 0.0 / 1.0 79.0 65.0 70.8
E M63 2½" or 2" 56.3 / 54.3¹ 46.0 65.3 1.8 / 2.5 0.0 / 1.0 78.9 80.0 88.0
F M75 3" or 2½" 68.2 / 65.3¹ 57.0 78.0 1.8 / 2.5 0.0 / 1.0 83.7 95.0 104.0
G M80 3½" 72.0 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 106.4 115.0
H M90 3½" 80.0 75.0 89.5 2.0 / 3.5 0.0 / 1.0 95.6 115.0 130.0
J M100 4" 90.0 88.0 104.5 2.5 / 4.0 0.0 / 1.0 95.6 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of
thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be sup-
plied) please specify when ordering.


Type CW, CX, CY and CZ. armour / braid types.
• Ingress Protection: IP66 • Provides a cable retention and low smoke and fume, zero halogen
to IEC/EN 60529. seal onto the cables outer sheath.
• Deluge Protection to DTS01 (Deluge Seal Optional). • Manufactured in Brass (standard), Nickel Plated Brass,
• Operating Temperature Range: -60°C to +100°C. 316 Stainless Steel or Aluminium.
SELECTION TABLE
Size Ref.
B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
D 1.45 - 1.8 1.0 - 1.45
E 1.45 - 1.8 1.0 - 1.45
F 1.45 - 1.8 1.0 - 1.45
HPG01
www.ehawke.com
UPD 090610
114 Cable Glands
120
Industrial
Metric
Entry
Application
Female Entry
Entry Thread
Thread
Male
• For use with non-armoured elastomer and plastic insulated cables
Ø 'B'
installed in conduit.

Male Entry Thread Size Female Entry Thread Size Cable Acceptance Details Hexagon Dimensions
Size NPT * NPT # Outer Sheath ‘B’
Standard Seal Alternative Seal (S) 'G' Across Across
Ref. Metric Standard or Metric Standard or
Flats Corners
Option Option Min. Max. Min. Max.
A M20 ¾" or ½" M20 - 11.0 14.3 8.5 13.4 56.4 30.0 32.5
B M25 1" or ¾" M25 - 13.0 20.2 9.5 15.4 48.2 36.0 39.5
C M32 1¼" or 1" M32 - 19.0 26.5 15.5 21.2 61.6 46.0 50.5
C2 M40 1½" or 1¼" M40 - 25.0 32.5 22.0 28.0 64.6 55.0 60.6
D M50 2" or 1½" M50 - 31.5 44.4 / 42.3¹ 27.5 34.8 83.2 65.0 70.8
E M63 2½" or 2" M63 - 42.5 56.3 / 54.3¹ 39.0 46.5 83.2 80.0 88.0
F M75 3" or 2½" M75 - 54.5 68.2 / 65.3¹ 48.5 58.3 86.4 95.0 104.0

• Construction and Test Standards: EN 50262. • Provides a cable retention seal onto the cables outer sheath.
• Ingress Protection: IP66 to IEC/EN 60529 and NEMA 4X. • Provides female running coupler for cable gland or conduit entry.
• Assembly Instruction Sheet: AI 394. 316 Stainless Steel or Aluminium.
UPD 090610

Hawke Cable Glands

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Hawke Cable Glands

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hawke Cable Glands

Uploaded by

Copyright:

Available Formats

Cable Glands 73

for Global Connection

76-77 Selection Chart

79 Hazardous Area Cable Glands - Group II

Hazardous Area Cable Gland Type: 501/421

82 Hazardous Area Cable Gland Type: 501/423

83 Hazardous Area Cable Gland Type: 501/453/RAC

84 Hazardous Area Cable Gland Type: 501/453/UNIVERSAL

85 Hazardous Area Cable Gland Type: 501/453/RAC/L

86 Hazardous Area Cable Gland Type: PSG 553/RAC

87 Hazardous Area Cable Gland Type: ICG 623

88 Hazardous Area Cable Gland Type: ICG 653/UNIVERSAL

89 Hazardous Area Cable Gland Type: ICG 653/UNIVERSAL/L

90 Hazardous Area Cable Gland Type: 501/414

91 Hazardous Area Cable Gland Type: SB 474

92 Hazardous Area Cable Gland Type: CSB 656N

93 Mining Cable Glands - Group I

94 Mining Cable Gland Features

95 Mining Cable Gland Type: 453/UNIVERSAL

96 Mining Cable Gland Type: 453/RAC

97 Mining Cable Gland Type: 453/T

98 Mining Cable Gland Type: 623

99 Mining Cable Gland Type: 653/UNIVERSAL

100 Mining Cable Gland Type: 653/T

102 Adaptor Flange Type: 483

103 North American Cable Glands/Connectors

104 North American Cable Glands/Connectors Features

105 North American Cable Glands/Connectors Type: 710*

106 North American Cable Glands/Connectors Type: 711* (and 713)

107 North American Cable Glands/Connectors Type: 753*

108 North American Cable Glands/Connectors Type: 755*

109 North American Cable Glands/Connectors Type: 153/X

110 North American Cable Glands/Connectors Type: 701

111 Industrial Cable Glands

112 Industrial Cable Glands Features

113 Industrial Cable Glands Type: 121

114 Industrial Cable Glands Type: 123

115 Industrial Cable Glands Type: 153/UNIVERSAL

116 Industrial Cable Glands Type: 153/RAC

117 Industrial Cable Glands Type: 153/RAC/L

118 Industrial Cable Glands Type: 150/RAC

119 Industrial Cable Glands Type: 151/RAC

120 Industrial Cable Glands Type: 114

* Dual marked UL & ATEX.

501/ 501/ 501/ PSG ICG ICG

What is a Hazardous area cable gland?

Why choose Hawke cable glands?

ICG 653 UNIVERSAL 4

1 Unique Rear Sealing System 3 Zero Cable Damage

CABLE GLAND SELECTION TABLE

Size Outer Sheath ‘B’

¹ Smaller value is applicable when selecting reduced NPT entry option.

Technical Data Features

15.0mm 'G' Approx (Fully Compressed Length)

The 501/423 cable gland provides two independent seals on non-armoured

CABLE GLAND SELECTION TABLE

Size Outer Sheath ‘B’

¹ Smaller value is applicable when selecting reduced NPT entry option.

Technical Data Features