Preset counters electronic

2 presets, printer interface

Display LED, 8-digits, programmable

NE213

Features
–– Preset counter with two presets
–– Display batch counter, main counter: 6-digits
–– Display totalizer: 8-digits
–– Batch counter, totalizer, hour counter
–– Operating mode, start count, scaling factor
programmable
–– Preset mode programmable
–– Printout by F-key or singal input
–– Printer interface RS232

NE213 - LED Preset counter

Technical data - electrical ratings Technical data - electrical ratings

Voltage supply 22...50 VAC (50/60 Hz) Interface RS232
85...265 VAC (50/60 Hz) Standard Protection class II
24 VDC ±10 % DIN EN 61010‑1 Overvoltage category II
Power consumption 15 VA, 8 W Pollution degree 2
Sensor supply 24 VDC ±20 % / max. 200 mA Emitted interference DIN EN 61000-6-4
Display LED, 7-segment display Interference immunity DIN EN 61000-6-2
Number of digits 8-digits - totalizer Programmable Operating modes
6-digits - main counter, batch parameters Sensor logic
counter, tachometer, hour Scaling factor
counter Count mode
Digit height 7.6 mm Control inputs
Function Preset counter Approvals UL/cUL, CE conform
Main counter with 2 presets
Batch counter with 1 preset Technical data - mechanical design
Totalizer
Printer interface Operating temperature 0...+50 °C

Subject to modification in technic and design. Errors and omissions excepted.

Scaling factor 0.0001...9999.99 Storing temperature -20...+70 °C
Multitplier / batch counter 1...99 Relative humidity 80 % non-condensing
Count modes Adding or subtracting E-connection Plug-in screw terminals
A-B (difference counting) Core cross-section 1.5 mm²
A+B total (parallel counting)
Up/Down Protection DIN EN 60529 IP 65 face with seal
A 90° B phase evaluation Operation / keypad 10 figure keypad with 5 function
Counting frequency 15 Hz, 25 Hz, 10 kHz keys
programmable Housing type Built-in housing
Operating modes Step preset, Main preset, Dimensions W x H x L 72 x 72 x 108 mm
Parallel alignment, Trailing Installation depth 108 mm
preset
Mounting Clip frame
Data memory >10 years in EEPROM
Cutout dimensions 68 x 68 mm (+0.7)
Reset Button, electric or automatic
Materials Housing: Makrolon 6485 (PC)
Outputs electronic NPN / PNP transistor switch Keypad: Polyester
Outputs relay Potential-free change-over Weight approx. 320 g
contact for main counter
Normally open/closed potential-
free for B1
Output holding time 0.01...99.99 s
30/10/2008

1 www.baumerivo.com
 Preset counters electronic
2 presets, printer interface
Display LED, 8-digits, programmable

NE213

Connection diagram Block circuit diagram

Relay outputs Voltage Sensor

supply supply
- 2 19 -
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12
+ 3 20 +
Signal input Totalizer

XP-Stop/ h-counter
GND

B A A 12 Output
RxD

+24V 0V
TxD

A 90° B Main counter with 4

NPN Br. 18-20
PNP Br. 18-19

B 13
Count 2 presets 5 P1
XB-counter

RS232 Reset 14 start count

XB-reset

XP-reset
scaling factor 6
Sensor
supply

Stop/Hold 15
7
8 P2
max. 265 V terminal - terminal / - terminal Batch counter as
XB-signal- 9
input 16 preselection counter
with 1 preset
11 10 9 8 7 6 5 4 3 2 1 XB-reset multiplier
17
Supply voltage

tachometer or 10
B1
Coding for batch counter 11
input logic
18 Operating time
B1 P2 P1 NPN Br. 18-20
PNP Br. 18-19 meter

TxD 23
Interface
RxD 25
Electronic outputs GND 26
RS232

26 25 24 23 22 21 20 19 18 17 16 15 14 13 12

Trigger level
XP-Stop/ h-counter
GND

B A
RxD

TxD

+24V 0V
Optocoupler inputs Input circuit
NPN Br. 18-20
PNP Br. 18-19

Count
Control inputs PNP- / NPN-logic
XB-counter

RS232
XB-reset

XP-reset
Sensor
supply

Count input
Trigger current 9...16 mA
max. 265 V terminal - terminal / - terminal
Switch-off current <0.5 mA
11 10 9 8 7 6 5 4 3 2 1
Input resistance 1.65 kΩ
Supply voltage

B1 P2 P1
Reset input
Output
Trigger current 5...8 mA
Switch-off current <0.5 mA
Input resistance 3.3 kΩ

Subject to modification in technic and design. Errors and omissions excepted.

Relay outputs Output circuit
Switching voltage max. 250 VAC / 110 VDC
Switching current max. 1A
Switching capacity max. 150 VA / 30 W
Relay responding time 5 ms

Electronical outputs Output circuit

PNP-switching transistor Open collector
Switching voltage 24 VDC ±20 %
Switching current max. 10 mA (AC)
50 mA (DC)

NPN-switching transistor Open collector

Switching voltage max. 35 V
Switching current max. 50 mA
30/10/2008

2 www.baumerivo.com
Preset counters electronic
2 presets, printer interface
Display LED, 8-digits, programmable

NE213

Part number

NE213. 3 AX09

Voltage supply
1 24 / 48 VAC
2 115 / 230 VAC
3 12...30 VDC

Outputs
1 Relay outputs, B1 normally closed
2 Relay outputs, B1 normally open
3 Electronic outputs PNP
4 Electronic outputs NPN

Interface
3 RS232

Dimensions

108

72 105
67.7
72

Subject to modification in technic and design. Errors and omissions excepted.

18.5 1-6

7
30/10/2008

3 www.baumerivo.com
 Preset counters electronic
2 presets, printer interface
Display LED, 8-digits, programmable

NE213

Subject to modification in technic and design. Errors and omissions excepted.

30/10/2008

4 www.baumerivo.com