Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 149 views

    International Well Control Forum Subsea BOP Kill Sheet - Deviated Well (Metric/Bar)

    Uploaded by

    Tg Tarro
    This document is a kill sheet for a deviated well. It provides formation strength data, drilling fluid properties, BOP details, deviation data, casing and hole geometry. It also outlines pump capacities, drill string and annulus volumes. Kicking scenarios are presented with calculations for kick size, initial circulating pressure, dynamic pressure losses at different points in the wellbore, and circulating pressures needed at the kick-off point and end of borehole to kill the well.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    International Well Control Forum Subsea BOP Kill Sheet - Deviated Well (Metric/Bar)

    Uploaded by

    Tg Tarro
    149 views3 pages
    This document is a kill sheet for a deviated well. It provides formation strength data, drilling fluid properties, BOP details, deviation data, casing and hole geometry. It also outlines pump capacities, drill string and annulus volumes. Kicking scenarios are presented with calculations for kick size, initial circulating pressure, dynamic pressure losses at different points in the wellbore, and circulating pressures needed at the kick-off point and end of borehole to kill the well.

    Original Title

    Subsea_BOP_Stack_Operations_BL_0.0981-_Deviated_Well_Kill_Sheet.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a kill sheet for a deviated well. It provides formation strength data, drilling fluid properties, BOP details, deviation data, casing and hole geometry. It also outlines pump capacities, drill string and annulus volumes. Kicking scenarios are presented with calculations for kick size, initial circulating pressure, dynamic pressure losses at different points in the wellbore, and circulating pressures needed at the kick-off point and end of borehole to kill the well.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    149 views3 pages

    International Well Control Forum Subsea BOP Kill Sheet - Deviated Well (Metric/Bar)

    Uploaded by

    Tg Tarro
    This document is a kill sheet for a deviated well. It provides formation strength data, drilling fluid properties, BOP details, deviation data, casing and hole geometry. It also outlines pump capacities, drill string and annulus volumes. Kicking scenarios are presented with calculations for kick size, initial circulating pressure, dynamic pressure losses at different points in the wellbore, and circulating pressures needed at the kick-off point and end of borehole to kill the well.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    PAGE 1 OF 3

    DATE :
    International Well Control Forum
    Subsea BOP Kill Sheet - Deviated Well (Metric/Bar) NAME :

    FORMATION STRENGTH DATA: CURRENT DRILLING FLUID:


    DENSITY kg/l
    SURFACE LEAK -OFF PRESSURE FROM
    FORMATION STRENGTH TEST (A) bar SUBSEA BOP DATA:
    DRILLING FLUID DENS. AT TEST (B) kg/l MARINE RISER m
    LENGTH
    MAX. ALLOWABLE DRILLING FLUID DENSITY = CHOKELINE m
    (A) LENGTH
    (B) + = (C) kg/l
    SHOE T.V. DEPTH x 0.0981
    DEVIATION DATA:
    INITIAL MAASP =
    KOP M.D. m
    ((C) - Current Density) x Shoe TVD x 0.0981
    KOP T.V.D. m
    = bar
    EOB M.D. m
    EOB T.V.D. m
    PUMP NO. 1 DISPL. PUMP NO. 2 DISPL.
    CASING SHOE DATA:
    l / stroke l / stroke SIZE in
    M. DEPTH m
    (PL) DYNAMIC PRESSURE LOSS [bar]
    T.V. DEPTH m
    SLOW PUMP PUMP NO. 1 PUMP NO. 2
    HOLE DATA:
    Riser Choke Friction Riser Choke Friction
    RATE DATA: Line Choke Line Choke SIZE in
    Line Line
    M. DEPTH m
    SPM
    T.V. DEPTH m
    SPM

    PRE-RECORDED LENGTH CAPACITY VOLUME PUMP STROKES TIME


    VOLUME DATA: m l/m litres stks minutes

    DP - SURFACE TO KOP x = (L) stks


    DP - KOP TO EOB x = + (M) stks
    DP - EOB TO BHA x = + (N1) stks

    + (N2) stks
    HEVI WALL DRILL PIPE x =
    (N3) stks
    DRILL COLLAR x = +
    (D) l stks min
    DRILL STRING VOLUME
    DC x OPEN HOLE x =
    DP / HWDP x OPEN HOLE x = +
    OPEN HOLE VOLUME (F) l stks min

    DP x CASING x = (G) + stks min

    CHOKELINE x = (H) + stks min

    TOTAL ANNULUS/CHOKELINE VOLUME (F+G+H) = (I) l stks min


    TOTAL WELL SYSTEM VOLUME (D+I) = (J) l stks min

    ACTIVE SURFACE VOLUME (K) l stks

    TOTAL ACTIVE FLUID SYSTEM (J+K) l stks Dr No SSD 02/01


    (BAR-981)
    MARINE RISER x DP x = l stks 27-01-2000
    PAGE 2 OF 3

    DATE :
    International Well Control Forum
    Subsea BOP Kill Sheet - Deviated Well (Metric/Bar) NAME :

    KICK DATA :
    SIDPP bar SICP bar PIT GAIN litres

    KILL FLUID DENSITY SIDPP


    CURRENT DRILLING FLUID DENSITY +
    TVD x 0.0981

    KMD ................. + =
    ................ kg / l

    INITIAL CIRC. PRESS. DYNAMIC PRESSURE LOSS + SIDPP


    ICP ................. + ................. = ............... bar

    INITIAL DYNAMIC
    SICP - CHOKE LINE FRICTION
    CASING PRESS AT
    KILL PUMP RATE = ................ - ................ = ............... bar

    KILL FLUID DENSITY


    FINAL CIRCULATING x DYNAMIC PRESSURE LOSS
    CURRENT DRILLING FLUID DENSITY
    PRESSURE
    ....................
    FCP x ................. =
    .................... ............... bar

    DYNAMIC PRESSURE KOPMD ............


    PL + (FCP-PL) x = .......... + (...........-............) x =
    LOSS AT KOP (O) TDMD ............ ............... bar

    SIDPP - (KMD - OMD) x 0.0981 x KOPTVD


    REMAINING SIDPP
    AT KOP (P)
    = ............ - (...............-................) x ................ x ................ =
    ............... bar

    CIRCULATING PRESS.
    (O) + (P) = ............. + ............. =
    AT KOP (KOP CP) ............... bar

    DYNAMIC PRESS. LOSS EOBMD ............


    PL + (FCP-PL) x = .......... + (...........-............) x =
    AT EOB (R) TDMD ............ ............... bar

    SIDPP - (KMD - OMD) x 0.0981 x EOBTVD


    REMAINING SIDPP
    AT EOB (S) (...............-................) x ............... x ................
    = ............ - =
    ............... bar

    CIRCULATING PRESS.
    (R) + (S) = ............. + ............. =
    AT EOB (EOB CP) ............... bar

    (T) x 100 .......... x 100 bar


    (T) = ICP - KOP CP = ............ - ............ = ........... bar = = .............
    (L) ........... 100 strokes

    (U) x 100 .......... x 100 bar


    (U) = KOP CP - EOB CP = ........ - ........ = ........... bar = = .............
    (M) ........... 100 strokes

    (W) x 100 .......... x 100 bar


    (W) = EOB CP - FCP = ........... - ........... = ........... bar = = .............
    (N1+N2+N3) ........... 100 strokes

    Dr No SSD 02/02 (BAR-981) 27-01-2000


    PAGE 3 OF 3

    DATE :
    International Well Control Forum
    Subsea BOP Kill Sheet - Deviated Well (Metric/Bar) NAME :
    STATIC & DYNAMIC DRILL PIPE PRESSURE [bar]

    STROKES
    STROKES PRESSURE
    [bar]

    Dr No SSD 02/03 (BAR-981) 27-01-2000

    You might also like