Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    System and Automatic Control Lab (EC-218)

    Uploaded by

    Arjun Verma
    (1) The document describes an experiment to program a PLC to control the transfer of liquid between containers based on temperature and empty sensor conditions. (2) The ladder logic program will turn the pump on for 20 seconds if the temperature is proper and the tank is empty, otherwise the pump will remain off. (3) Sensors will monitor the temperature and empty conditions as inputs to the PLC, which will control the pump output using a relay switch.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    System and Automatic Control Lab (EC-218)

    Uploaded by

    Arjun Verma
    31 views3 pages
    (1) The document describes an experiment to program a PLC to control the transfer of liquid between containers based on temperature and empty sensor conditions. (2) The ladder logic program will turn the pump on for 20 seconds if the temperature is proper and the tank is empty, otherwise the pump will remain off. (3) Sensors will monitor the temperature and empty conditions as inputs to the PLC, which will control the pump output using a relay switch.

    Original Title

    Exp_2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    (1) The document describes an experiment to program a PLC to control the transfer of liquid between containers based on temperature and empty sensor conditions. (2) The ladder logic program will turn the pump on for 20 seconds if the temperature is proper and the tank is empty, otherwise the pump will remain off. (3) Sensors will monitor the temperature and empty conditions as inputs to the PLC, which will control the pump output using a relay switch.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views3 pages

    System and Automatic Control Lab (EC-218)

    Uploaded by

    Arjun Verma
    (1) The document describes an experiment to program a PLC to control the transfer of liquid between containers based on temperature and empty sensor conditions. (2) The ladder logic program will turn the pump on for 20 seconds if the temperature is proper and the tank is empty, otherwise the pump will remain off. (3) Sensors will monitor the temperature and empty conditions as inputs to the PLC, which will control the pump output using a relay switch.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    System and Automatic Control Lab (EC-218)

    Experiment No. 10
    2
    OBJECT: Draw ladder logic to transfer liquid one container to another container with
    Given condition,
    (i) If temperature is proper and tank is not empty then pump remains off.
    (ii) If temperature not proper but tank is empty then pump remains off.
    (iii) If both are proper then pump on for 20 seconds otherwise pump remains off.
    MATERIALS REQUIRED:
    Programmable logic controller: (plc base unit: SEMENS s7-200).
    Micro win step 7programming software
    Program cable: (usb ppp ).
    Power supply: 0-5v dc source.
    Patch cords
    Temperature sensor
    Empty sensor solid state transistor based
    Pump 220volt ac
    Relay switch

    ELEMENT SYMBOL STATUS I/O NOTATION


    System and Automatic Control Lab (EC-218)

    PUMP P N/O O Q 0.0


    TEMP. T N/O I I 0.0
    SENSOR
    EMPTY E N/O I I 0.1
    SENSOR

    LADDER logic for time dependent tank filling system

    PROCEDURE:

    1. First turn off the power supply and then connect the circuit diagram as show in fig using
    the (plc base unit: semens s7-200).
    2. Connect the program cable: (usb ppp ).
    3. Makes sure the toggle switches are set on input and output.
    4. Write the program in the micro win step 7 wizards.
    5. Enter the program as shown in ladder logic
    6. Connect the q0.0 lead to 5v relay coil.
    7. Connect the pump motor between the pole and n/o contact of the relay switch.
    8. Connect the i0.0 patch cord to the temperature sensor terminal.
    9. Connect the i0.1 patch cord to the empty sensor terminal.

    OBSERVATION:
    System and Automatic Control Lab (EC-218)

    1. Study the program you just entered, but do not test it yet. How will this program operate?
    2. Turn on the power supply and set the run/stop switch of the pc to run.
    3. Test the operation of the program. Explain how this program operates.
    4. Observe the output devices, how do the output device response

    RESULT:

    PRECAUTION:
    1. Confirm that run/stop switch of the pc is set to stop before continuing
    2. Do not detach usb cable during downloading.
    3. Do not remove memory module in on condition.
    4. Do not over load the relay beyond that rating current.
    5. Do not run pump without water

    You might also like