Electronics Engineering Mastery Test 2 ECE Pre-Board
Electronics Engineering Mastery Test 2 ECE Pre-Board
Electronics Engineering Mastery Test 2 ECE Pre-Board
pinoybix.org/2017/06/pre-board-exam2-in-electronics-engineering.html
June 5, 2017
1/33
Choose the letter of the best answer in each questions.
What is a group of circuits that provides timing and signals to all operation in the
computer?
A. Output unit
B. Memory unit
C. Control unit
D. Input unit
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option C
Solution:
__________ is the most influential factor in the switching speed of saturated bipolar
transistor
A. Charge stored
B. Collector current
C. HFE
D. Base current
View Answer:
Answer: Option A
Solution:
2/33
4. ECE Board Exam March 1996
What is a pi-network?
View Answer:
Answer: Option B
Solution:
A. Resistance
B. Permeance
C. Reluctance
D. Conductance
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option D
Solution:
View Answer:
Answer: Option A
Solution:
A. A series regulator
B. A shunt regulator
C. A constant current source
D. A shunt current source
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option D
Solution:
How many turns are needed to produce a magnetizing force of 5000 A.t. for a coil of 50
amperes?
A. 1,000 turns
4/33
B. 5,000 turns
C. 100 turns
D. 500 turns
View Answer:
Answer: Option C
Solution:
When an SCR is triggered or on condition, its electrical characteristics are similar to what
other solid-state device (as measured between its cathode and anode)?
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option D
Solution:
A. electrons
B. positive ions
C. row decoders
5/33
D. holes
View Answer:
Answer: Option C
Solution:
A. Electrons
B. Positive ions
C. Negative ions
D. Holes
View Answer:
Answer: Option A
Solution:
A. high retentivity
B. low permeability
C. high permeability
D. high density
View Answer:
Answer: Option B
Solution:
When you increase the resistance in a circuit, the flows of electrons will ______
A. flow faster
B. be constant
C. be decreased
D. be stopped
View Answer:
Answer: Option C
6/33
Solution:
View Answer:
Answer: Option B
Solution:
A. Reverse current
B. Limits flow of current
C. Forwards current
D. Renders unstable current
View Answer:
Answer: Option A
Solution:
What is the effect in terms of bandwidth when the Q of a single-tune stage is doubled?
A. Doubled
B. The same
C. Halved
D. Four times
View Answer:
Answer: Option C
Solution:
7/33
___________ is the dc motor control senses.
A. Resistance
B. Counter emf
C. Field voltage
D. Armature current
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option A
Solution:
A. Pi-network
B. Pi-L-network
C. Inverse-Pi-network
D. L-network
View Answer:
Answer: Option B
Solution:
What type of transformer that is used to protect technicians and operators from deadly
electrical shock?
A. Absorber transformer
8/33
B. Step-down transformer
C. Step-up transformer
D. Isolation transformer
View Answer:
Answer: Option D
Solution:
A. The external magnetic field when the current is flowing through the exciting coil.
B. The flux density, which exist in the iron core when the magnetic field intensity is
reduced to zero.
C. The flux density, which exist in the iron core when the magnetic field intensity is at
its maximum value.
D. The flux density when the magnetic core is saturated.
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option C
Solution:
A. 2
B. 4
9/33
C. 3
D. 1
View Answer:
Answer: Option A
Solution:
A. Gates
B. Flip-flop
C. Static-RAM
D. Read-only memory
View Answer:
Answer: Option B
Solution:
Semiconductors which are considered to be “low power” or “small signal” usually have
power dissipation ratings of
A. 1 watt or less
B. 5 watts or less
C. exactly 1 watt
D. 10 watt or less
View Answer:
Answer: Option A
Solution:
10/33
View Answer:
Answer: Option C
Solution:
A. statement
B. source code
C. mnemonic
D. macro-instruction
View Answer:
Answer: Option D
Solution:
View Answer:
Answer: Option C
Solution:
_________ currents are wasteful currents which flow in cores of transformers and
produces heat.
A. Residual
B. Eddy
C. Sneak
D. Magnetizing
View Answer:
11/33
Answer: Option B
Solution:
A. Radio waves
B. Sound waves
C. Light waves
D. Heat waves
View Answer:
Answer: Option C
Solution:
A. 15.9 MHz
B. 50.3 MHz
C. 15.9 MHz
D. 50.3 kHz
View Answer:
Answer: Option B
Solution:
A. Norton’s Law
B. Thevenin’s Law
C. Lenz Law
D. Faraday’s Law
View Answer:
Answer: Option C
Solution:
12/33
36. ECE Board Exam March 1996
The science of physical phenomena at very low temperatures, approaching absolute zero is
called ____________
A. Crytanalysis
B. Cybernetics
C. Temperature inversion
D. Cryogenics
View Answer:
Answer: Option D
Solution:
If a dry cell has an internal resistance of 0.50 ohm and an emf of 2 volts, find power
delivered in a one ohm resistor?
A. 1.33 watts
B. 1.66 watts
C. 3.66 watts
D. 1.77 watts
View Answer:
Answer: Option D
Solution:
What happens in the resistance of copper wired when its temperature is raised?
A. Decreased
B. Steady
C. Increase
D. Zero
View Answer:
Answer: Option C
Solution:
13/33
Refers to the part of computer that performs mathematical operations
A. CPU
B. Flip-flop
C. Assembly Language
D. ALU
View Answer:
Answer: Option D
Solution:
________ is called a memory device which holds fixed set of data in a circuit.
A. RAM
B. Register
C. Logic
D. ROM
View Answer:
Answer: Option D
Solution:
When a voltage of 100 V at 50 Hz is applied to a choking coil A, the current taken is 8A and
the power is 120 W, when applied to a coil B, the current is 10 A and the power is 120 W.
What power will be taken when 100 V is applied to the two coils connected in series?
A. 4737 W
B. 140 W
C. 70 W
D. 1454 W
View Answer:
Answer: Option B
Solution:
The current needed to operate a soldering iron which has a rating of 600 watts at 110 volts
is
14/33
A. 5.455 A
B. 66,000 A
C. 18,200 A
D. 182 A
View Answer:
Answer: Option A
Solution:
A. Propagation delay
B. Pulse duration
C. Settling time
D. Access time
View Answer:
Answer: Option D
Solution:
A. logic levels
B. noise margin
C. power consumption
D. propagation delay
View Answer:
Answer: Option B
Solution:
What is responsible for the phenomenon when voltages across reactances in series can
often be larger than the voltage applied to them?
A. Capacitance
B. Resistance
15/33
C. Conductance
D. Resonance
View Answer:
Answer: Option D
Solution:
A. 16
B. 4
C. 8
D. 32
View Answer:
Answer: Option A
Solution:
A. 111011
B. 111101
C. 110111
D. 101111
View Answer:
Answer: Option D
Solution:
What is the logic circuit having two or more inputs but only one output with high output if
any or all inputs are high, with low output only when all inputs are low?
A. AND gate
B. OR gate
C. NOR gate
D. NAND gate
16/33
View Answer:
Answer: Option B
Solution:
A. Oscilloscope
B. Logic monitor
C. Logic
D. Logic
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option B
Solution:
A. Coupling
B. Swamping
C. Doping
D. Mixing
View Answer:
Answer: Option A
Solution:
17/33
52. ECE Board Exam March 1996
A. Admittance
B. Conductance
C. Reluctance
D. Resistance
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option C
Solution:
A. Lithium
B. Lead-acid
C. Silver cadmium
D. Silver-zinc
View Answer:
Answer: Option A
Solution:
What do you call the piece of equipment in an oscilloscope used to indicate pulse condition
in a digital logic circuit?
18/33
A. Logic probe
B. Probe
C. Electroscope
D. Galvanometer
View Answer:
Answer: Option A
Solution:
How many bits, binary pattern represent the decimal numbers 0 to 9 in binary coded
decimal?
A. 4
B. 1
C. 2
D. 8
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option C
Solution:
What is the law whereby the attraction or repulsion between two magnetic poles is directly
proportional to their strength?
A. Coulomb’s law
19/33
B. Newton’s law
C. Coulomb’s first law
D. Norton’s law
View Answer:
Answer: Option C
Solution:
A. AB
B. B
C. C
D. A
View Answer:
Answer: Option C
Solution:
_______ refers to a circuit that stores pulses and produces an output pulse when specified
number of pulses is stored.
A. Counter
B. Register
C. Flip-flop
D. Buffer
View Answer:
Answer: Option A
Solution:
A. 12 cells
B. 4 cells
C. 8 cells
20/33
D. 10 cells
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option D
Solution:
A. Molecules
B. Ions
C. Electrons
D. Neutron
View Answer:
Answer: Option C
Solution:
Parallel cells have the same voltage as one cell but have _______.
A. unstable resistance
B. less current capacity
C. fluctuating power output
21/33
D. more current capacity
View Answer:
Answer: Option D
Solution:
A. dibit
B. quad
C. pixel
D. nibble
View Answer:
Answer: Option D
Solution:
The reason for the thin layer of varnish over the copper coil pattern is to prevent
A. oxidizing
B. flux
C. corrosion
D. dioxide
View Answer:
Answer: Option A
Solution:
A. 3.5 V
B. 2.5 V
C. 1.5 V
D. 0.5 V
View Answer:
Answer: Option C
22/33
Solution:
A. logic levels
B. speed immunity
C. propagation delay
D. power consumption
View Answer:
Answer: Option C
Solution:
_______ is the term used to express the ratio of the change in the dc collector current to a
change in base current in a bipolar transistor.
A. Gamma
B. Beta
C. Alpha
D. Delta
View Answer:
Answer: Option B
Solution:
_______ refers to a program that translates and then immediately executes statements in
a high level language.
A. Interpreter
B. Synchronous
C. Interface
D. Operating system
View Answer:
Answer: Option A
Solution:
23/33
71. ECE Board Exam March 1996
A. Reluctivity
B. Resistivity
C. Retentivity
D. Conductivity
View Answer:
Answer: Option C
Solution:
A. biFET
B. MOSFET
C. MESFET
D. JUGFET
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option C
Solution:
24/33
_________ is the progressive decay with time in the amplitude of the free oscillation in a
circuit.
A. Decrement
B. Pulse decay time
C. Damping
D. Dancing
View Answer:
Answer: Option C
Solution:
What do you call a circuit that changes pure binary code into ASCII?
A. Decoder
B. Encoder
C. Demultiplexer
D. Code converter
View Answer:
Answer: Option D
Solution:
View Answer:
Answer: Option D
Solution:
25/33
A. The internal resistance of a cell limits the amount of output current
B. Two electrodes of the same metal provide the highest voltage output
C. Secondary cell can be recharged
D. The negative terminal of a chemical cell has a charge of excess electrons
View Answer:
Answer: Option B
Solution:
What type of circuit whose parameters are constant which do not change with voltage of
current?
A. Lumped circuit
B. Tuned circuit
C. Reactive circuit
D. Linear circuit
View Answer:
Answer: Option D
Solution:
__________ is gaseous tube which uses a pool of liquid mercury as its cathode.
A. Thyratron
B. Phanotron
C. Klystron
D. Ignition
View Answer:
Answer: Option B
Solution:
What do you call an electromagnet with its core in a form of magnetic ring?
A. Polarization
B. Irradiation
26/33
C. Toroid
D. Doping
View Answer:
Answer: Option C
Solution:
_________ is the procedure by which an atom is given a net charge by adding or taking
away of electron.
A. Polarization
B. Irradiation
C. Ionization
D. Doping
View Answer:
Answer: Option C
Solution:
What do you call an electronic component that is a non-linear resistor and its resistance is
function of the voltage across it?
A. Triac
B. IC
C. Varistor
D. Thyristor
View Answer:
Answer: Option C
Solution:
Find the half-power bandwidth of a resonant circuit which has a resonant frequency of 1.8
MHz and a Q of 95.
A. 189 Hz
B. 1.89 kHz
27/33
C. 58.7 kHz
D. 18.9 kHz
View Answer:
Answer: Option D
Solution:
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option B
Solution:
A. ACC
B. ALU
C. CPU
D. Compiler
View Answer:
28/33
Answer: Option C
Solution:
What is the gain of a vacuum tube having the following parameter amplification factor is
80, external plate-load resistance of 30,000 ohms and the tubes internal plate resistance is
10,000 ohms?
A. 60
B. 20
C. 30
D. 40
View Answer:
Answer: Option A
Solution:
A. Collector
B. Ground
C. Base
D. Emitter
View Answer:
Answer: Option D
Solution:
Which class of amplifier has the highest linearity and least distortion
A. Class A
B. Class AB
C. Class C
D. Class B
View Answer:
Answer: Option A
29/33
Solution:
A. Gauss
B. Weber
C. Maxwells
D. At/Wb
View Answer:
Answer: Option D
Solution:
Find the value of voltage regulation having a dc voltage of 67 V without load and with full
load current drawn the output voltage drops to 42 V.
A. 59.5 %
B. 15.9 %
C. 62.6 %
D. 32.5 %
View Answer:
Answer: Option A
Solution:
What is the reason why more cells can be stored in a given area with dynamic cells?
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option A
Solution:
A. doping
B. collision
C. recombination
D. ionization
View Answer:
Answer: Option D
Solution:
A. Relays
B. Routers
31/33
C. Repeaters
D. Bridges
View Answer:
Answer: Option D
Solution:
Diagram showing procedures which are followed and actions taken is called
View Answer:
Answer: Option C
Solution:
A. Approximately 1
B. Approximately 0
C. Approximately 2
D. Approximately 4
View Answer:
Answer: Option A
Solution:
__________ refers to the term remote sensing with regard to a linear voltage regulator.
A. The feedback connection to the error amplifier is made directly to the load
B. The load connection is made outside the feedback loop
C. The error amplifier compares the input voltage to the reference voltage
D. Sensing is accomplished by wireless inductive loops
View Answer:
32/33
Answer: Option A
Solution:
View Answer:
Answer: Option D
Solution:
33/33