SCO1603PMB: Make Before Break Changeover Switch External Handle 160A 3P Catalogue No
SCO1603PMB: Make Before Break Changeover Switch External Handle 160A 3P Catalogue No
SCO1603PMB: Make Before Break Changeover Switch External Handle 160A 3P Catalogue No
MAKE BEFORE BREAK CHANGEOVER SWITCH EXTERNAL HANDLE 160A 3P
Power Distribution and Protection > Isolators and Transfer Switches > Transfer Switches > Socomec Manual Transfer
Switches > SCO (MB) Make-Before-Break Manual Transfer Switch > SCO 3 Pole Make-Before-Break Changeover Kits
with External Handle
KIT - 160A 3 pole make before break changeover switch Includes
Handle and Shaft
· Standard (I-0-II) and make before break (I-I&II-II) options
available covering any application requirement
· Three stable positions (I-O-II) not affected by voltage drops or
vibrations ensuring the connected load is protected against
possible network interference
· Easy connections thanks to copper bar connection kit accessory
for 2000 to 3200A switches enabling the use of flat or edgewise
connection with top or bottom bridging.
· Compatibility with the ergonomic IP65 S-Type Handles which
features interlocking (in the ON position), padlocking, UV and
chemical agent resistive material and the choice of standard
blue or red / yellow colour
Representative Photo Only
(actual product may vary based on configuration selections)
SPECIFICATIONS
Component Type Power Distribution & Protection Manual Changeover Switch
Number of Poles 3
Ui, Rated Insulation Voltage 800 V (rms)
Uimp, Impulse Withstand Voltage 8 kV
Ie, Rated Operational Current, AC-21a, 400V 160 A@400V
Ie, Rated Operational Current, AC-21a, 690V 160 A@690V
Ie, Rated Operational Current, AC-22a, 690V 125 A@690V
Ie, Rated Operational Current, AC-23a, 400V 160 A@400V
Ie, Rated Operational Current, AC-23a, 690V 63 A@690V
Ie, Rated Operational Current, DC-21a, 220V 160 A@220V
Ie, Rated Operational Current, DC-21a, 440V 125 A@440V
Ie, Rated Operational Current, DC-22a, 220V 160 A@220V
Ie, Rated Operational Current, DC-22a, 440V 125 A@440V
Ie, Rated Operational Current, DC-23a, 220V 125 A@220V
Ie, Rated Operational Current, DC-23a, 440V 125 A@440V
kW Rating, AC-23a, 400V, 3ph 80 kW @400V
Current, Fuse-Protected Short-Circuit Capacity, 400V 100 kA
Mechanical service life 10000 cycles
Weight 2.9 kg
Tightening Torque, Min 9 Nm
Cable Cross Section (Min) 50 mm²
Cable Cross Section (Max) 50 mm²
NHP Electrical Engineering Products SCO1603PMB Datasheet
1300 NHP NHP | nhp.com.au | 0800 NHP NHP | nhp-nz.com 14 August 2018, Page 6713 o
Catalogue No: SCO1603PMB
MAKE BEFORE BREAK CHANGEOVER SWITCH EXTERNAL HANDLE 160A 3P
Power Distribution and Protection > Isolators and Transfer Switches > Transfer Switches > Socomec Manual Transfer
Switches > SCO (MB) Make-Before-Break Manual Transfer Switch > SCO 3 Pole Make-Before-Break Changeover Kits
with External Handle
REFERENCES
IECEx Certificate -
Supplier Declaration of
-
Conformity:
Installation Guide: -
User Manual: -
Manufacturer Datasheet: -
Manufacturer Catalogue
-
& Product Selection:
NHP Electrical Engineering Products SCO1603PMB Datasheet
1300 NHP NHP | nhp.com.au | 0800 NHP NHP | nhp-nz.com 14 August 2018, Page 6714 o