Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Dibea d850 Instruction Manual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 22

EN

D850 Robotic Vacuum Cleaner


EN
Table of Content
Safety Instructions................................................................................................................................ 1

Product Features................................................................................................................................... 2

Product Component......................................................................................................................... 5-8


Main body and accessories..................................................................................................................... 6
Main body diagram................................................................................................................................. 6
Dust bin................................................................................................................................................... 7
Roller brush............................................................................................................................................ 7
Battery.................................................................................................................................................... 8
Charging base......................................................................................................................................... 8
Remote control....................................................................................................................................... 8

Product Operation.......................................................................................................................... 9-14


Starting up/standby/sleeping................................................................................................................. 9
Status indicator light............................................................................................................................... 9
How to use the remote control............................................................................................................ 10
Battery charging.................................................................................................................................... 11
Scheduling............................................................................................................................................ 12
Cleaning modes.................................................................................................................................... 12
Install water tank.................................................................................................................................. 13
Install side brushes............................................................................................................................... 14
Replace the roller brush....................................................................................................................... 14
Replace the battery.............................................................................................................................. 14

Product Matintaining.................................................................................................................. 15-16


Cleaning side brushes........................................................................................................................... 15
Cleaning dust bin and filter................................................................................................................... 15
Cleaning the roller brush...................................................................................................................... 16
Cleaning sensor and charging poles..................................................................................................... 16

Troubleshooting................................................................................................................................... 17

Product Specifications....................................................................................................................... 18
Safety Instructions
Before using this product, please read the safety instructions and follow all those
regular safety precautions.

! Read this user manual thoroughly and carefully before using this product.
! Save this user manual.
! Any operations that oppose to description in this user manual may lead to harm
to human or this product.
Note:
1. Only the certified technician may disassemble the product. Users are not allowed to disassemble or
repair the product.
2. Only use the adapter provided by the factory. Using other un-matched adapters may cause electric
chock, fire or product damage.
3. Do not touch the power cord, plug or adapter when your hands are wet
4. Do not make clothes or part of a body drawn into the product´s wheels.
5. Do not operate this product close to cigarette, lighter, match or any flammables.
6. If the product needs to be cleaned, clean it after charging is stopped.
7. Do not over-bend the power cord or pressure the power cord with heavy or sharp objects.
8. This product can be used only indoors, do not use it outdoors.
9. Do not sit on top of this product or attach an object (over 10 kg) on the top of it.
10. Do not use this product in wet or moist environment (bathroom for example).
11. Before using, remove all the damageable objects (textile, glass, lighting, etc) and objects that could
get caught in the brushes (cords, papers, curtains, etc.).
12. Do not place this product where it is easy to drop off (tables, chairs, etc.).
13. Take out the battery assy during transportation or when you do not use it for a long time.
14. Before charging, check and make sure to plug the adapter into the wall socket properly. Or else the
battery may be damaged.
15. To avoid stumbling, inform all the people in the house when the robot is working.
16. Empty the dust bin when it is full before using this product (clean it at least once a week).
17. Use this product in temperature from 0° to 40° (centigrade degree).
18. Do not place this product in high temperature environment.
19. The battery must be removed from the product before it is scrapped.
20. Users need to replace the battery in time when it depletes and dispose the old one safely.
21. Avoid using this prodct on rugs in dark color or with dark stripes, or on plush carpets.
22.
Warning
! Children, mentally challenged people or people with a lack experience and knowledge are
not allowed to use this product without special guidance.
! Do not use the product somewhere higher than the user in case it drops off and hurts people.
! Do not use the product in open areas without protective guard.

1
EN
Product Features
Intelligent Suction Adjustment
This product is able to automatically adjust its suction power when meeting different floor
environments. Not only could it make cleaning more efficiently, but also it helps saving power up to
30%.

One Click Start


Easy to operate. By pressing the
button, you can easily start the robot!

Washable Dust Bin


The dust bin and filter can be washed easily
without costing you too much time. Besides,
it avoids dust blowing in the air couse a
second polluting by washing the dust bin
under water.

2
Product Features
Various Cleaning Modes
Four cleaning modes are provided to meet your needs.

Auto cleaning mode


The robot will clean a room automatically and
adjust its cleaning according to the situation.

Note: to start the Auto mode, press the


button on the machine or the button on
the remote control.

Spot cleaning mode


The robot will spiral intensely when it
detects a dirtier area. You could use the
remote control to start the spot cleaning.
Once it finishes cleaning the dirty area, the
robot will change to the auto cleaning mode
automatically.

Note: When using the remote control, put the


robot near the dirty area. Press the
button to start, press to stop spot
cleaning mode.

3
EN
Product Features
Edge cleaning mode
When the robot detects obstacles (wall for
example), it will change to the edge cleaning
mode automatically. And it will start cleaning
along the obstacles with its two side brushes.

Scheduling mode
When a certain time is scheduled, the robot
will leave the home base and start working at
the scheduled time.

4
Product Parts
Main body and accessories

Pictures Description Pictures Description


1. 2.

Charging home
Main body *1
base *1

3. 4.

Adapter *1 Remote control *1

5. 6.

Water tank/mop *1 HEPA filter *1

7. 8.

Cleaning brush *1 Side brush *4

9.

User manual *1

5
EN
Product Parts
Main body

1. Main pad 2. Cover 3. Rear view window 4. Start button

5. Light filter film 6. Bumper 7. Cover lock 8. Dust bin

9. Roller brush 10. Roller brush guard 11. Side brush 12. Lock

13. Right wheel module 14. Battery lock 15. Battery compartment 16. Bottom body

17. Charging pole 18. Nose wheel 19. Left wheel module

6
Product Parts
Dust bin

1. Sealing ring
2. Dust bin
3. Primary filter
4. HEPA filter
5. HEPA frame
6. Suction cover
7. Dust bin seal
8. Dust bin cover
9. Handle bearing
10. Dust bin handle
11. Induction magnet

Roller brush and accessories

1. Hair gear
2. Brush stick
3. Bearing seat

1 2 3

7
EN
Product Parts
Battery compartment

1. Battery compartment
2. Positive pole
3. Negative pole
4. Li-ion batteries
5. Battery cover

Charging base

1. Infrared signal transmitting window


2. Charge connecting point
3. Signal light
4. Power supply socket

Remote control

Scheduling time
Clock time

Plan button Clock button

Direction button ON/OFF button

Spot cleaning Recharging button

Note: Install batteries first before using the remote control. Take out the batteries if you do not use the
remote control for a long time.

8
Product Operation
Starting up/Standby/Sleeping
Starting up
a. Make sure the battery and dust bin are in the right place.

b. Press the button on main body or the button on remote control to start cleaning.

Note: If the robot is in sleeping mode, press on main body or the button on remote control
to change it to the standby mode first and press "or" again to start cleaning.

Standby
Standby means the robot is connected to power supply and
waits for further operation. Change to standby via followed
ways:

a. When the robot is working, press to switch to


standby.
b. Press the ON/OFF button on the remote control.

Sleeping

When the robot is in sleeping mode, press or long press ON/OFF on the remote control to
wake it up. To converse battery life to a maximum degree, switch to sleeping mode via followed
ways:

a. When in standby mode, long press for 3 seconds to switch to sleeping mode.
b. When in standby mode (no operation for 30 seconds) the robot will switch to sleeping
automatically.

Status Indicator Light


a. Standy mode: yellow light
b. Working mode: green light
c. Back to charging base: green light
d. Back to charging base (received the signal): blue light
e. Charging: flashing light
f. Fully charged: green light
g. Error: red light

9
EN
Product Operation
How to use the remote control
ON/OFF button/CLEAN button
a. Shortly press to start cleaning when in standby/working mode.
b. Shortly press to confirm the time modification when in scheduling mode.

Plan button
a. In standby mode, shortly press to start the scheduling
mode.
b. In modifying schedule mode, shortly press to confirm

Self-charging button
a. When working, shortly press to make the robot go back
to the home base for charging.

Clock button
a. In standby mode, shortly press to the time mode.
b. In modifying mode, shortly press to confirm and return to the standby mode.

Spot button
a. In standby/working mode, press to start spot cleaning.

Directional button
a. In standby/working mode, press to make the robot turn left, right, back and go forth.
b. In modifying time/scheduling mode, press to modify the time, press to modify
between "hour" and "minute".
c. : go forth
d. : go back
e. : turn left
f. : turn right

10
Product Operation
Battery Charging
1. Place charging home base: Put charging home base against the wall and remove obstracles
about 1 meter at two sides and about 2 meters forward like in picture a.
2. Plug into an outlet like in picture b.
3. Press the self-charging button to make the robot go back to the home base for charging like in

picture c.

Note:
a. During charging, the indicator light on the main body turns yellow from strong to weak.
b. After finishing charging, the indicator light will turn green.
c. Low power in standby mode, the indicator light will turn red.
d. Low power in working mode, the indicator light will turn red.

Ways to effectively extend battery life:


a. Before first use, charge the robot for 12 hours.
b. Once the battery is low, recharge it as soon as possible.
c. The robot will automatically return to charging home base when cleaning is done or battery is low.
d. If the robot ist not used for long time, please take out the battery and store it in a safe place.
e. If the robot was not used for 3 month, please charge it for 12 hours.

11
EN
Product Operation
Scheduling
You can schedule the robot to clean at a certain time with the PLAN button on the remote control as
followed.
1. Make sure the robot is in standby/charging mode. Press the "plan" button on the remote control.
The left "00" of "00:00" will flash from hour to minute setting.
2. Press button to increase and decrease hour.
3. Press button to change from hour to minute.
4. Press button to increase and decrease minute.
5. Press the ON/OFF button to save the schedule.
6. To cancel scheduling, set the number on display panel to "00:00" in scheduling mode.

Cleaning mode
Auto cleaning
In auto mode, the robot keeps walking straight, and will automatically
make a turn when meeting obstacles to cover some irregular environment
and corners. (Picture 1)

Edge cleaning
In edge cleaning, the robot walks along the obstacles and walls, ideal for
corner and edge cleaning. (Picture 2)

Zig-zag cleaning
In this mode, the robot walks in a "lune" line, which avoids duplication of
cleaning. Fast and effective, ideal for cleaning large regular rooms. (Picture
3)

"V" line cleaning


In this mode, the robot walks in a "V" line, which avoids duplication of
cleaning, also ideal for large regular rooms cleaning. (Picture 4)

12
Product Operation
Install water tank
1. Install the mop: Attach the mop to the bottom of the water tank smoothly like in picture a.
2. Add water to the water tank: Open the plug on the water tank, fill water in the tank, then close
the plug like in picture b.
3. Install the water tank: Turn over the robot and install the water tank to the bottom of it like in
picture c & d.

Note: Top up the water tank when the water is not enough for cleaning.

1. mop 4. water tank plug


2. Velcro strap 5. water tank assy
3. water tank 6. slot

13
EN
Product Operation
Install side brushes
1. Press the side brush into the slot to install it.
2. Pull it out to remove the side brush like in
picture a.

Replace the roller brush


1. Re m ove b r u s h g u a rd by u n l o c k i n g
the two tabs and the guard will eject
automatically.
2. Remove the roller brush directly.
3. To reinstall, insert the roller brush first
and then reinstall the guard until hearing

a click like in pictrure b.

Replace the battery


1. Turn over the robot, slide to unlock the
battery and it will eject automatically.
2. Take out the battery directly for
replacement and put it back for
reinstallment.
3. Press down the battery until hearing a
click to finish the installment.

Note: Do not replace the battery randomly. Unless the battery is not used for a long time, place the
battery in a safe place to avoid short circuit.

14
Product Maintaining
Cleaning side brushes
1. Check the side brushes to see wheter there is something stuck.
2. Use a cleaning brush or mop to clean side brushes (once a week).
3. Once the side brush is out of shape, put it in warm water for 5
seconds.
4. Replace the side brush once it is damaged or can´t be used.

Cleaning dust bin and filter


1. Press "Push" on the main body of the robot to open the cover, take out the dust bin assy.
2. Open the dust bin, take out the HEPA filter and the primary filter assy.
3. Empty the dust bin and wipe the dust.
4. Wash the dust bin and the primary filter by water, clean the HEPA filters with the cleaning tool.
5. Install primary filter and HEPA filter into dust bin.
6. Close dust bin cover and install it into main body.

Note:
a. The dust bin is suggested to be cleaned once a week.
b. Wash HEPA filter after 15-20 days´use. Replace it after use for 24 months at maximum.
c. Install both HEPA and primary filters when they are dry.
d. Do not place HEPA and primary filters directly in the sun.
e. HEPA and primary filters can be replaced if needed.

15
EN
Product Maintaining
Cleaning the roller brush
1. Remove the rollerbrush assy from the main body. Clean the hairs and furs tangled on the
brush. Use the cleaning tools or a soft dry cloth to clean the brush and the guard cover.

Note: For better cleaning, clean it once a week.

Cleaning sensors and charging poles


1. Slightly wipe the sensor window and charging poles with the cleaning tools or a soft dry cloth
(see picture 2).
2. Clean the charge connecting points on the charging home base with a soft dry cloth (see
picture 3).
Note: Never let water, thinner, etc directly touch the sensor window. Clean them once a week.

16
Troubleshooting
Error Sheet

Error Cause Solution

The robot doesn´t work, the


indicator light turns red and has 3 The dust bin is full Empty the dust bin
beeps.

The dust bin is not in the robot Install the dust bin

The robot doesn´t work.


The dust bin has not been
The indicator light turns red after Reinstall the dust bin
installed properly
restart and has 2 beeps.

The wheel lifts up because of


Constact the seller
defect failures

The robot can work but goes


back and turns around every 3-5 Nose wheel failure Contact the seller
seconds
The built-in cameras are covered
by dust or obstr Wipe the dust off
acles

The robot keeps going back and Check if the bumper is stuck by
Bumper sensor failure
turning around while working something

Built-in camera or bumper failure Contact the seller

17
EN
Product Specifications
Product Specifications

Classification Item Detail

Diameter 290 mm

Mechanical
Height 75 mm
Specifications

Weight 2.9 kg

Power voltage 14.8 V


Electrical
Specifications
Battery specifications Li-ion 2200 mAh

Dust bin capacity 300 ml

Charging type Auto charging

Cleaning
Cleaning mode Auto, Spot, Edge, Daily Schedule
Specifications

Charging time approx 2 hours

Cleaning time 100 minutes

Main Body Button Type Touch

18
Providing one-stop household cleaning solution

Suzhou Dibea Electrical Technology Co., Ltd.


Official website: www.dibea.com

You might also like