(This BOQ template must not be modified/replaced by the bidder and the same should be

uploaded after filling the relevent columns, else the bidder is liable to be rejected for this
NUMBE NUMBE
TEXT # TEXT # NUMBER
R# R#

Sr. Estimated
Item Description Quantity Units
No. Rate

1 2 4 5 6
structure and suitable foundation in line with enclosed
specification & annexure. The job also includes providing
monkey ladder in approved design, section thickness for
safe access to roof. The design should be such that
weather shade of effective widths & span, over openings
are built within the form itself. Major Fabrication work
shall be carried out at Shop/Factory. For Fabricated
Plate Girder Steel Plates conform to IS 8500 Gr 540B Fe
shall be used. All Rolled section shall conform to IS2062
Gr Fe 410 WA. Only connection/ fittings shall be
permitted at site as directed by IOCL/ Consultant. The
rate includes welding weights, site connection, nut &
bolts, required dia anchor / foundation bolts with
templates as per structure design and same will not be
measured for payment. Only theoretical Weight of as
1.00 150 MT 152794.00
built Structural members shall be measured for payment
purpose.
The rate also include vetting of complete structural
design by two govt. approved structural design
engineers or consultants (preferably govt institutes like
IIT / VJTI etc.) and submission of structural stability
certificate as per the requirement of MIDC or IOCL.
All structure to be painted with approved painting
scheme as given below. Rates are inclusive of painting.
a) Surface preparation by shot blasting conforming to
SA 2.5 (to be done at shop) b) Prime coat of Epoxy
Based Zinc Ethyle Silicate Primer (min. 60% vol. solids),
one coat of 75 - 80 micron DFT. (to be done at shop c)
Intermediate coat of TWO PACK EPOXY HIGH BUILD
MIO COATING (min. 60% vol. solids). one coat of 100
 cladding
Providing & fixing colour coated Klippon Galvalume
steel profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) of bare
metal thickness 0.50mm as per ASTM A446 having yield
stress of 275mpa, surface shall have hot dip metallic
coating of Aluminium Zinc alloy comprising of 55%
aluminium,43.5% zinc & 1.5% silicon, with 5-7 micron
epoxy primer and polyester top coat of 15-18 micron on
both sides,total coated thickness(TCT) of 0.58mm.
Sheet shall have protective guard film of 25 microns
minimum to avoid scratches while transportation &
should be supplied in single length up to 6 m or as
desired by Engineer-in-charge. The fixing of sheet shall
2.00 be complete as per manufacturer's specification 4800 M2 1268.00
including provision of Clip, washer, bolts, nuts, self
drilling high grip screws with integral washeras
necessary for fixing all complete as directed & instructed
by CONSULTANT / IOCL Engineer.
The item also includes supply and fixing of
Polycarbonate Translucent sheet of 2 mm thk having top
surface plain & bottom surface textured and profile
compatible with Zincalume /galvalume sheet with all
accessories. The area of Polycarbonate Translucent
sheet will be approx. @ of 5% of total covered area for
lighting in both roofing & Cladding in matching profile of
galvalume sheet as decided by IOCL. The measurement
for payment shall be only for covered area for
considering Polycarbonate and Galvalume sheets (i.e.

HYSD Bars of Grade Fe 415 /500 TMT for reinforcement

Supplying and placing in position High Yield Strength
deformed TMT Bars conforming to IS: 1786, Fe415/500
for beams, slabs, columns, etc at all levels and locations
of RCC work with all leads & lifts. including transporting
the steel, straightening, cleaning, decoiling, cutting,
bending to required shapes and lengths as per
specifications, binding with Contractor's own 16 gauge
SWG binding wire at every intersection, supplying and
placing with proper cover blocks, supports, chairs,
3.00 overlaps, spacers, etc. all complete as per Bar bending 442080 KG 65.00
schedule approved by CONSULTANT/IOCL Engineer-in-
Charge. Separate measurement will be made under this
item for authorised laps only as per approval of
IOCL/Consultant.
All Reinforcement Work shall be carriedout Strictly as
per Specification for Plain & Reinforced Cement
Concrete. The weight of reinforcement shall be
calculated as per theoretical weight given in standard
steel table and wastage/ unauthorized overlaps/binding
wires shall not be payable extra.
 Providing & laying design mix cement concrete of M-30
grade, in roads driveways, using cement content as per
design mix, using coarse sand and graded stone
aggregate of 40 mm nominal size in appropriate
proportions as/approved & specified design
criteria,providing dowel bars with sleeve/ tie bars
wherever reqd, laying at site, spreading & compacting,
mechanically by screed board vibrators, vacuum
dewatering process and finally finished by
floating,brooming with wire brush including steel form
4.00 576 M3 7953.00
work with sturdy MS.channel sections, curing making
provision for contraction / expansion, construction and
longitudinal joints( 10 mm wide x 50 mm deep ) by
groove cutting machine, providing and filling joints with
approved joint filler and sealants,complete all
as/direction of Engineer -in- Charge (Dowel & tie bars to
be paid separately under reinforcement) Note:- Cement
content considered in M-30 is @ 340 kg/cum. Excess /
less cement used as / design mix is payable/
recoverable separately.

RCC M 30 Below Plinth (Below FFL)

Providing and laying in position ready mixed
concrete of M30 grade, manufactured in fully automatic
batching plant and transported to site of work in transit
mixer for all structures, equipment foundations,
columns, beams, floors, slabs, roof slabs, buildings
lintels, gutters staircases, fins, chajjas, pardis, sills,
copings, projections, column/ beam encasings etc. all
leads having continuous agitated mixer, manufactured
as per mix design of specified grade for reinforced
5.00 468 M3 7746.00
cement concrete work including pumping of R.M.C. from
transit mixer to site of laying , including the cost of
centering, shuttering finishing but excluding the
reinforcement including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve
workability without impairing strength and durability
as per direction of the Engineer - in - charge. (Note :-
Cement content considered in this item is @ 340
kg/cum.
 Structural works for Mezzenine floor inside the shed,
Pipe Racks/ Pipe Supports & other Miscellaneous work
Supplying, fabricating, welding and/or bolting, as
required, erecting and fixing in position all types of
structural steel work viz Beams, columns ,plates,
bracings shop fabricated including all accessories viz.
nuts, bolts, cleats, gussets,base plate, etc as per
specification complete as directed by CONSULTANT/
IOCL Engineer in charge. All Plates and Rolled Section
6.00 40000 KG 78.00
Shall conform to IS 2062 Gr Fe 410 WA or Gr Fe 410
WB. The rate to include for welding weights, site
connection, nut & bolts and same will not be measured
for payment. This item includes the painting of steel
structural members as per painting scheme given for
above for PEB work. Only theoretical Weight of
Structural members shall be measured for payment
purpose. All Structural Work shall be carried out Strictly
as per Specification for Structural Steel Work.

PCC (1:3:6) Providing and laying Plain Cement Concrete

of nominal volumetric mix 1:3:6 (1 Cement: 3 Sand: 6
Crushed stone aggregates) with 40 mm and down size
graded aggregates below RCC foundations and grade
slab & any other work as per requirement including any
7.00 required permanent brick /stone masonry including 373 M3 5241.00
shuttering, dewatering, tamping, ramming, curing, etc
with all leads & lifts and all complete as per instructions
of CONSULTANT/IOCL Engineer- in-Charge. All PCC
Work shall be carried out Strictly as per Specification for
Plain & Reinforced Cement Concrete

230 mm thk. Rubble Soling with manual compaction

Providing, supplying and placing 230 mm thick dry
rubble stone packing/soling under floor, foundation,
pavement, roads, steps, ramps & other similar
locations, handset vertically in rectangular lines,
8.00 interstices filled in with smaller stone chips including 3728 M2 454.00
watering, compacting/consolidating & finishing to the
required levels and lines etc with manual compaction etc
complete as directed by CONSULTANT/IOCL Engineer-
In- Charge. (Blinding layer shall be of metal, sand or
murrum supplied by contractor)
 Random rubble masonry below plinth Random rubble
masonry with hard stone in superstructure below plinth
level, including levelling up with cement concrete 1:4:8
9.00 315 M3 4576.00
(1 cement : 4 coarse sand : 8 graded stone aggregate
20mm nominal size) with cement mortar 1:6 (1 cement:
6 sand ) as directed by IOCL/Consultant

230 thk Brick Masonry in CM 1:4 Supplying &

constructing 230 thk brick masonary walls using bricks
of first class burnt clay (class 5.0 as per IS:1077,
Compressive strength of Brick 50 kg/cm2) of approved
source at all locations and levels with cement mortar
10.00 180 M3 5735.00
(1:4) including scaffolding, racking of joints, watering,
but excluding cement plaster finish complete as directed
and instructed by IOCL/Consultant Engineer incharge.
Brickwork shall be carried out strictly as per
Specification for Brick Masonry Work.

Providing & laying 80mm thick factory made Pre-cast

cement concrete interlocking paver block of M 40 grade
made by block making machine with strong vibratory
compaction & of approved size and design/ shape shade
and manufacturers and as per IOCL's specifications. The
paver block will have peripheral chamfer,with average
crushing strength more than 40 N/Sq.mm as/ BS6717
Part -1(1986), maximum water absorption of 2% after
10 minutes and 5% after 24 hrs. as per BS 1881,
maximum dimensional deviations of +/- 2mm on length
11.00 800 M2 1200.00
& width and +/- 3mm on on thickness. The job includes
supplying & laying a layer of 50mm thick clean course
sand on thoroughly compacted sub-base below the
paver blocks, cutting the paver blocks wherever
required with hydraulic splitter, filling in the joints at the
edges of paver blocks with sand,compacting with
machine vibrator to required line and level, etc.
complete.(Payment for provision of edge restraints shall
be made separately);- Grey or Coloured 80mm thick
paver blocks.

WBM
Supply and laying of water bound macadam in layers,
each of 75 mm thick (consolidated) with 63 mm to 45
mm stone aggregate. Each layer shall be consolidated
12.00 by power roller after watering, spreading chippings of 3728 M2 223.00
stone and murrum complete as per specifications. Item
includes supply of murrum 6 mm thick, watering and
rolling with power roller complete with preparation of
surface. Rate per Layer
 Design, engineering, manufacture/supply, fabrication,
welding, installation, testing &
commissioning of slope elevator for elevating empty
container/ buckets bags/ urea bags from ground level to
the mezzanine floor. The item rates are inclusive of
provision of roller coveyor at ground floor of suitable
13.00 1 LS 812700.00
size, belt conveyor having rough top belt-nylon
impregnated PVC with moulded rubber embedded cleats
or metal conveyor. This item is also inclusive of Roller
lagging material, Rollers, free rollers etc required at
both the end. The entire structure should be of MS and
to be painted as per the painting scheme given above.

13.01 80NB 800.00 M 991

Industrial type high bay fixture suitable 120W LED lamp

with integral Diver and glass cover with IP-54 class of
13.02 protection,equivalent to Bajaj Catalogue no.- 50 EA 11759.00
BJHFL120LED, 'catalogue no.-LH01-102-XXX-50-
XXCrompton Catalogue no.:-LHB120CDL/60, Wipro

13.03 65NB 650.00 M 812

Power Cables: 650/1100V grade, XLPE insulated, Al/Cu.

conductor armoured, extruded PVC inner sheathed &
12.00 extruded FRLS PVC outer sheathed conforming to IS 800 M 602.00
7098 (Part 1).
1C x 630 sq.mm A2XWaY
 RCC M 30 above Plinth (Above FFL) Same as RCC M30
Below plinth but Concrete for RCC works at all levels
above plinth level for all structures, equipment
13.00 foundations, columns, beams, floors, slabs, roof slabs, 50 M3 8673.00
buildings lintels, gutters staircases, fins, chajjas, pardis,
sills, copings, projections, column/ beam encasings etc.
(up to a ht.of 8 mts.) above plinth level.

SITC of items related to augmentation in existing

electrical panel:
The existing feeders in PMCC panel located in same
building used for the existing Lube Plant is to be
upgraded as per the requirement of DEF Plant. Scope
includes dismantling of existing feeder & handing over
to Owner store and supply & fixing of outgoing ACB
along with all control switches & protection features,
indication lamps, meters (Ammeter, Voltmeter etc.),
gland plates, panel front door, sizing & replacement of
vertical busbar and all other auxiliaries for retrofitting
purpose. Extension of panel and/or cable chamber
14.00 1 LS 400,000.00
required is to be considered as part of the augmentation
work. Followings are the details :
i) Additional cable compartment/ extension panel may
be proposed keeping in view of cable terminations if the
existing compartment is not sufficient.
ii) Panel front door needs to be replaced and indication
lamps, control switches & Ammeter/voltmeter etc. need
to be flushed with the front door.

Note: Contractor is advised to visit the site, explore the

scope of retrofitting work and quote accordingly.

Supply, Fabrication, Erection, Installation, Welding and

Painting of all the steel structures for pipeline support as
per drawings or instruction of Engineering In-charge.
15.00 5000.00 Kg 79.00
Item include cleaning of surface and painting with two
coat of red oxide primer and two coats of synthetic
enamel paint.

15.01 3.5 C x 150 Sq. mm, 'A2XFY' cable with FRLS insulation 500 M 759.00
 Filling with available good excavated earth (Excavation
excluded, rock excluding) Filling the sides of
foundations, sub-structures, Plinth/below Grade Slab for
development of plot/ shed etc. with approved quality of
earth laid in layers not exceeding 300 mm in loose
thickness including levelling, watering, ramming, rolling,
compacting with 10-12MT mechanical roller / hand
compactor/ mechanical rammer to 95% Modified Proctor
16.01 Density etc as per specification in Earthwork in Filling. 5500 M3 145.00
complete with any lead within 1 KM from IOCL premises
as directed and instructed by CONSULTANT / IOCL
Engineer In charge. The item includes cost of
dewatering if required including payment of Royalty to
Owner of borrow pit, if applicable; payment of
applicable royalties, taxes, etc to Statutory Authority. All
Filling Work shall be carried out Strictly as per
Specification for Earthwork in Excavation.

Providing earthing with 80 mm dia, 3.8 M long GI

(Heavy duty) perforated pipe as per IS:3043 (with latest
amendment) including providing suitable earth bus for
14.00 interconnection, providing a mixture of salt & charcoal, 25 EA 13280.00
making earth pit chamber with chequered plate cover as
per standard Drwng. etc. all complete as per specif. &
direction of Engineer-In-charge.

14.01 32NB 800.00 M 410

14.02 40NB 600.00 M 496

Random rubble masonry above plinth Random rubble

masonry with hard stone in superstructure above plinth
level and upto floor five level, including leveling up with
15.02 cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 50 M3 5533.00
graded stone aggregate 20mm nominal size) with
cement mortar 1:6 (1 cement: 6 sand ) as directed by
IOCL/Consultant.
 Rolling Shutters (Motor operated) Gear operated type-
rolling shutters with gear box and crank handle at waist
level on inside as well as outside Providing & fixing
rolling shutter made out of 18 gauge steel sheets for
laths, including bottom rail, guide channels, lock plates,
locking arrangement, fixing bolts, pulling handles, hood,
rolling arrangement, standard make springs in brackets,
necessary bearings, etc. including fixing of frames with
rag bolts, grouting of parts in position etc. and also
16.02 5 EA 55132.00
including two coats of red oxide zinc chromate primer
and two coats of synthetic enamel paint of approved
colour, shade & brand etc. complete as per relevant IS
standard or as per manufacturer's requirements or as
directed by IOCL. All fitted & fixed complete as per the
drawings and instructions of CONSULTANT/IOCL
Engineer In charge.(Measurement for the payment shall
be the area of clear shutter size). Approx. area of each
Rolling shutter is 3 m x 3.5 m.

Turbo Air Natural Ventilator at Roof : Providing &

Fixing of Turbo Air Natural Roof Ventilator with 2 mm
thk UV Stabilized FRP Base profile to match with
Galvalume roof sheeting with adequate overlaps in all
sides to avoid seepage/ leakage of water. The FRP Base
of the Turbojet will be Tapering from minimum 750 to
achieve 600m throat at top. The height of the Turbojet
17.02 shall be about 600 mm. The ventilators shall have Vanes 40 EA 6695.00
made out of Hi-Grade Industrial Aluminium and top
plate & bottom ring of stainless steel.The turbojet shall
have permanently lubricated & sealed type double
bearing such as 6001ZZ of SKF and it should be
maintenance free & leak proof. Turbojet shall be
installed as per manufacturer specification and as
directed by IOCL/CONSULTANT Engineer in charge.

17.03 25NB 800.00 M 333

17.04 100NB 200.00 M 1325

Filling with imported murrum in Plinth/below Grade Slab

Supplying and filling with good quality of approved earth
with PI (Plasticity Index) of 1 to 7 (Low plastic)
containing not more than 20% cohesive fines namely
clay and Max. dry density of material not less than 1.80
gm/cc below grade slab / within plinth, including
identifying & locating of borrow pits, excavation at
borrow pits outside Plant premises; including payment
of Royalty to Owner of borrow pit, if applicable;
payment of applicable royalties, taxes, etc to Statutory
Authority for operating the borrow pit; loading at
18.04 borrow pit end; including transportation from borrow pit 500 M3 529.00
to IOCL Premises; removing debris, organic matter, etc;
spreading in layers not exceeding 300 mm loose depth;
rolling, compacting with 10-12 MT mechanical roller /
hand compactor /mechanical rammer to 95% Modified
Proctor Density etc as per specification in Earthwork in
Filling, dewatering during course of filling, watering,
compacting the murum or sand to obtain 95% of
modified proctor maximum laboratory dry density all
complete as per specifications and instructions of IOCL
Engineer-in-Charge. All Filling Work shall be carried out
Strictly as per Specification for Earthwork in Excavation.

18.05 3.5 C x 95 Sq. mm, 'A2XFY' cable with FRLS insulation 500 M 529.00
 Providing and fixing aluminium work for doors, windows,
ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and
other sections of approved make conforming to IS: 733
and IS : 1285, fixed with rawl plugs and screws or with
fixing clips, or with expansion hold fasteners including
necessary filling up of gaps at junctions,at top, bottom &
sides with with required EPDM rubber/neoprene gasket
etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever
19.05 required including cleat angle, Aluminium snap beading 500 KG 513.00
for glazing/ panelling, C.P. brass/stainless steel screws
including fixing all complete as per drawing & the
directions of Engineer-in-charge. Cost of glazing or
panels to be paid for separately.
However the rates are inclusive for windows &
ventilators with powder coated aluminium sections
including providing fixing hings/ pivots & making
provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket
required.

Excavation & Backfilling in All Types of Ordinary soil

including filled soil, clay, Hard basalt bedrock etc upto
1.5 m depth below FGL/NGL: Excavation and backfilling
around foundation and trenches/pits in all types of soil
viz. earth, sand, gravel, clay, soft & hard murum,
Asphalt, WBM etc. (excluding soft/hard rock) for
footings, steps, plinth beams, equipment foundations,
drains, trenches, manholes, underground tanks/pits, etc
including shoring strutting, dewatering wherever
20.05 required (until foundation work is complete). Item also 1512 M3 145.00
includes carting, stacking if required, filling, Spreading,
levelling and compacting / consolidating, disposal of
surplus materials outside IOCL premises to an
unobjectionable place following local rules or as per
instructions of CONSULTANT/IOCL Engineer In Charge
(Rate includes removal of any vegetation, small shrubs
etc.)
All Excavation Work has to be carried out Strictly as per
Specification for Earthwork in Excavation.

Supply, Installation, testing & commissioning of

Intelligent Analogue Addressable optical smoke
Detector with floating sensitivity complete with all
21.05 accessories like base, base box, etc. to be installed in 100 EA 2,173.00
Office, warehouse. interconnecting to loop cable
complete as required. (Make : Morley Honeywell,
Schrack, or equivalent)
21.06 150NB 100.00 M 2154

Demolishing stone masonry manually/ by mechanical

means including stacking serviceable material & disposal
22.06 210 M3 959.00
of unserviceable material out of site at unobjectionable
place and as per direction of Engineer-in-charge:

Providing & fixing roof mounted solar tubular day

lighting system of 750 mm dia (Tube) consisting (i)
Light Collector of UV stabilized optical grade 2 mm clear
transparent Polycarbonate dome with/without light
management deflection panels. (ii) Factory made metal
kerb with 2 seal system or UV stabilized moulded FRP
roof kerb/adopter with water breaker arrangement and
to be fixed onto metal sheet roof. The adoptor/kerb
base should be flat, roof hugging and 100% matching
with corrugation profile of base roof sheet. (iii) 1200
mm long anodised & PVD coated Light transfer tubing
23.06 system of 2 mm thick (min) Aluminium alloy sheet 10 EA 19296.00
without joint (iv) Double glazed diffuser of UV stabilized
optical grade Polycarbonate material along with injection
moulded ABS plastic or FRP ring. The diffuser can also
be of semi clear 2 mm (min) prismatic Polycarbonate
dome shape with one side plain and surface structure on
one side. The design and shape of solar light shall be as
per manufacturer's specifications and fixing of the whole
system shall be completely leak proof. The solar day
lighter shall provide at least 200 LUX at ground when
installed at approx. 10 M height under clear sky
conditions of ambient light of 1,00,000 LUX .
 PCC (1:2:4) Providing and laying Plain Cement Concrete
of nominal volumetric mix 1:2:4 (1 Cement: 2 Sand: 4
Crushed stone aggregates) with 40 mm and down size
graded aggregates below RCC foundations and grade
slab & any other work as per requirement including any
24.06 required permanent brick /stone masonry including 30 M3 6219.00
shuttering, dewatering, tamping, ramming, curing, etc
with all leads & lifts and all complete as per instructions
of CONSULTANT/IOCL Engineer- in-Charge. All PCC
Work shall be carried out Strictly as per Specification for
Plain & Reinforced Cement Concrete.

24.07 50NB 300.00 M 598

Anti-termite treatment
'Anti termite treatment to bottom surface (in case of
masonry foundation and basements) and the sides (upto
a height of 300 mm from bottom) of the excavated
trenches with chemical emulsion by admixing
25.07 chloropyrofos emulsifiable concentrates (1% 2000 M2 87.00
concentration)with water by weight at the rate of 5
litres per sq.m. area. The work shall be carried out as
per specification described in 6.2.1 of code IS-6313
(part - II) 1981. (Mode of measurement will be the plan
area of foundation treated).

Supply and Laying (Underground/on wall

mounting/depending upon the location/path) along with
proper protection of 2 Core x 1.5 Sqmm copper
conductor FRLS armored red color cable along with
26.07 1500 Mtr 107.00
clamping or on existing cable tray with clamping
wherever required. The laying also includes the civil
work wherever required. (Cable Make – Polycab or
equivalent)
 Excavation & Backfilling in All Types of Ordinary soil
including filled soil, clay, Hard basalt bedrock etc from
1.5 m to 3.0 m or more depth below FGL/NGL:
Excavation and backfilling around foundation and
trenches/pits in all types of soil viz. earth, sand,gravel,
clay, soft & hard murum, Asphalt, WBM etc. (excluding
soft/hard rock) for footings, steps, plinth beams,
equipment foundations, drains, trenches, manholes,
underground tanks/pits, etc including shoring strutting,
27.07 dewatering wherever required (until foundation work is 972 M3 127.00
complete). Item also includes carting, stacking if
required,filling, Spreading, levelling and compacting/
consolidating, disposal of surplus materials outside IOCL
premises to an unobjectionable place following local
rules or as per instructions of CONSULTANT/ IOCL
Engineer In Charge (Rate includes removal of any
vegetation, small shrubs etc.). All Excavation Work has
to be carriedout Strictly as per Specfication for
Earthwork in Excavation.

Supply, Installation, testing & commissioning of

Intelligent Analogue Addressable optical Beam Smoke
Detector with Transmitter-Receiver & Reflector
28.07 complete with all accessories like base, base box, etc. to 4 EA 39,770.00
be installed under roof and concealed space, etc.
interconnecting to loop cable complete as required.
(Make : Morley Honeywell, Beam LRK, or equivalent)

Supply, Installation, testing & commissioning of 20 mm

size Pendent type sprinklers of brass/bronze with
chrome plated of standard design having K-115,
Quartzoid bulb of rating 680 C, Quick Response (QR)
with other accessories as required. The sprinklers shall
29.07 be UL listed or FM approved. Sprinkler to be fitted with 350.00 EA 450.00
Teflon Tape and must be leak proof/leak tight. The
make may be of NewAge, HD Fire, Spraysafe, Tyco,
Viking etc
The work shall be carried out in a warehouse at all
heights upto 12 M.
 Development of tube well in accordance with IS : 2800
(part I) and IS: 11189, to establish maximum rate of
usable water yield without sand content (beyond
permissible limit), with required capacity air
compressor, running the compressor for required time
till well is fully developed, measuring yield of well by "V"
30.07 notch method or any other approved method, 250 H 626.00
measuring static level & draw down etc. by step draw
down method, collecting water samples & getting tested
in approved laboratory, i/c disinfection of tubewell, all
complete, including hire & labour charges of air
compressor, tools & accessories etc., all as per
requirement and direction of Engineer in charge.

ADDRESSABLE 4 LOOP FIRE DETECTION ALARM

PANEL - Supply, installation, testing & commissioning
of Microprocessor based Intelligent and electronically
addressable, modular, expandable, networkable, fire
Alarm system panel for combined smoke detection
system at Warehouse as well as office buildings. The
panel shall have 4 loop capacity having distributed
memory, the panel shall have LCD display unit, The
31.07 panel shall have 240 volts AC power supply, automatic 1 EA ###
battery charger, 24 volts, sealed lead acid maintenance
free batteries sufficient for 48 hours normal working and
then be capable of operating the system for 15 minutes
during emergency condition, capacity to store minimum
1000 history events. Panel shall have minimum 32 bit
micro-processor; each loop should support at least 99
detectors & 99 devices. (Make : Morley Honeywell,
Schrack, or equivalent)

Active Repeater - Supply, Installation, Testing and

Commissioning of Active Repeaters at three positions –
Location In Charge Cabin, warehouse office and Security
cabin. Functions – Silence, Mute, reset, Accept,
Evacuate and test controls. Should be compatible with
32.07 the main Fire Alarm panel. The repeater panel shall 3 EA 49,200.00
duplicate all the audio-visual annunciations initiated at
the main panel. Battery back up along with the
charging facility as that of main panel shall be provided
for uninterrupted operation for atleast 8 hours. (Make :
Morley Honeywell, Schrack, or equivalent)
 Providing and applying external sand faced plaster
20mm thk consists of 12 mm thk in C.M. 1:6 first coat
and 8 mm thk in CM 1 : 2 second coat to all RCC and
masonry works at all locations and levels including
required grain finishing, curing etc. complete as per
specification and as directed and instructed by
CONSULTANT / IOCL Engineer in charge. NOTE: The
33.07 500 M2 291.00
rates includes the cost of the base coat of not less than
12mm thk., external patta, drip moulds, curing and
providing and fixing 200mm wide G.I. chicken mesh 26g
thk. & 15mm mesh size at junctions of brick and
RCC/PCC work etc. as well as providing and mixing
waterproofing compound of approved make in both
coats as per manufacturers specifications.

Providing, supplying, clamping and fixing 160 mm Dia (6

kg/sqcm) UPVC rain water down take pipes from
34.07 terraces to the ground level including fittings & 250 Rmt 582.00
providing of all required accessories etc complete as per
drawings.

35.07 Supply, Installation, testing & commissioning of Installation 2.00

control (Alarm)
EA valve
66719.00
of cast iron body and bras

Providing and fixing G.I. chain link fabric fencing of

required width in mesh size 50x50mm including
strengthening with 2mm dia GI wire or nuts, bolts and
36.07 washers as required complete as per the direction of 200 M2 648.00
Engineer-in-charge using hot dipped galvanised wire of
4mm dia (The rate for civil works for excavation, brick
masonry, PCC shall be paid separately)

MS grill : Supply & fixing of MS grill in 12x12 MS square

bar or 25/5 flat, spacing will be 200 mm or as per IOC
37.07 1000 KG 121.00
specs including painting with one coat of synthetic
enamel over one coat of primer.
 Structural steel work in built up sections/ framed work
in gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works including
cutting,hoisting,fixing in position.
All Painting Work shall be carried out preferably at Shop
or as directed by IOCL Engineer in charge as per
painting scheme given for above for PEB work. Final
Touch up Paint may be provided at site after erection as
directed by IOCL/CONSULTANT.
38.07 1147 KG 100.00
- (Rate shall include cost of supply of paint, primer,
surface preparation, scaffolding all complete as per
instructions of
CONSULTANT/IOCL Engineer-in-Charge). Primer & paint
shall be of approved make as specified by
CONSULTANT/IOCL

3C x 2.5 Sq. mm, 'YWY' cable ( For Lighting Circuits)

38.08 600 M 187.00
with FRLS insulation

38.09 50 x 6 mm Hot dipped GI Strip. 600 M 169.00

Internal Cement plaster 12mm thk. Providing & applying

cement plaster in C.M. 1:4 mix to all RCC & masonry
work at all levels and locations including grooves,
pattas,drip moulding, scaffolding, watering, raking out
joints in masonary or concrete work as per masonry &
39.09 plaster specification. The rate to include providing and 500 M2 200.00
fixing of 200mm wide chicken wire mesh of 26G &
12mm mesh size at the junction of different construction
materials. The cement used shall be Portland Pozzolana
Cement (Uniform Blended Portland cement with fine
pozzolana) conforming to IS:1489 Part 1 and Part 2
 Same as above but Plain Sheet for Gutter (600 mm over
all girth) with all the necessary accessories required
including brackets, welding clamps, bolts, nuts
galvanised iron and bituminious washers, drop ends,
40.09 100 M 961.00
nozzles, stop ends etc. laid to required slopes making
joints water tight, testing etc.complete as specified and
directed. The specification of plain sheet for Ridge shall
be the same as of clip-on sheet.

Sand Filling: Supplying and filling locally available good

quality river sand in trenches, pits etc and under
foundations in layers of 150 mm thick including watering
41.09 90 M3 1059.00
and compacting to achive 95 % Modified Proctor Density
etc all complete as per instructions of
IOCL/CONSULTANT Engineer-in-Charge.

S/F/I Perforated GI trays of 300mm x 50mm x 2mm

41.10 100 M 931.00
with bends, tees, cross members etc. as per

Grid False Ceiling

Providing & Fixing 15mm thick densified tegular edged
eco friendly light weight calcium silicate false ceiling tiles
of approved texture pintone/cosmos / Hexa or
equivalent of size 595 x 595 mm in true horizontal level
suspended on inter locking metal grid of hot dipped
42.10 galvanised steel sections (galvanising @ 120 grams per 50 M2 1728.00
sqm including both side) consisting of main 'T' runner
suitably spaced at joints to get required length and of
size 24x38mm made from 0.33mm thick (minimum)
sheet, spaced 1200mm centre to centre, and cross "T"
of size 24x28mm made out of 0.33mm (Minimum)
sheet, 1200mm long.

43.10 Sintex or equivalent water tanks 5000 litre 2 Nos 36330.00

 115 thk half Brick Masonry in CM 1:4 Supplying and
constructing 115mm thick burnt clay brick masonry in
super structure using first class bricks (class 5.0 as per
IS:1077, Compressive strength of Brick 50 kg/cm2) of
approved source in cement mortar (1:4) including
necessary scaffolding, racking of joints, providing
horizontal reinforcement mesh comprising of ms flats of
section 3X25 or ms round bars of 6 to 8mm dia in every
third or fourth course to increase its lateral stability and
for anchoring with load bearing wall, watering but
44.10 100 M2 685.00
excluding cement plaster finish complete as directed and
instructed by IOCL Engineer in charge.(up to a lift of 12
mts.) Transoms & mullions shall be provided in the brick
work when length or height of wall exceeds 2M.
Transoms shall be provided at lintel/door height.
Spacing of mullions shall not exceed 1.5M c/c. Size of
transoms/ mullions shall be 115mm x 115mm with M15
grade concrete using 10mm & down graded aggregate
only. Supplying and placing formwork etc for transoms/
mullions etc shall be included in the quoted rate

Providing specified type of pointing in brick or stone

masonry including curing etc.
45.10 216 M2 317.00
Raised and cut pointing on stone work with cement
mortar 1:3 (1 cement: 3 fine sand)

46.10 Supply, installation testing & commissioning of 150 mm dia 4.00 EA 16207.00

S/F/I Perforated GI trays of 150mm x 50mm x 2mm

46.11 100 M 633.00
with bends, tees, cross members etc. as per
 Exterior Paint: Providing and applying one coat of
approved primer & two coats of Exterior Emulsion paint
of Asian make (ACE Paint) or equivalent of approved
shade to all external surfaces of cement plastered work
47.11 or concrete including scaffolding, preparation of the 500 M2 111.00
surfaces as per manufacturers requirements, crack
filling with approved filler material, curing etc. complete
as per manufacturers specifications & as directed by
CONSULTANT / IOCL Engineer in charge.

Interior Paint: Providing & applying one coat of primer,

one coat of putty and three coats of acrylic Emulson
paint of approved shade & make, carrying out the work
48.11 as per manufacturer specification including cleaning, 500 M2 97.00
internal surface preparation, staging/ scaffolding etc.
complete and as directed by CONSULTANT / IOCL
Engineer incharge.

49.11 Supply, installation, testing & commissioning of Swing type 8.00

wall mounting
EA Fire Hose
5966.00
Reel conforming to IS:

120W LED Street light type fixture with integral driver

suitable for IP-66 class of protection, equivalent to
49.12 Bajaj'Catalogue no.-BRTFG120LED, Crompton Catalogue 4 EA 11877.00
no.:-LSTN120CDL, Wipro catalogue 'no.-LR02-132-XXX-
57-XX

49.13 3C x 2.5 Sq. mm, 'YWY' cable 120 EA 362.00

 Supply, Installation, testing & commissioning of 15 mm
size Pendent type sprinklers of brass/bronze with
chrome plated of standard design having K-80,
Quartzoid bulb of rating 680 C, Standard Response (SR)
with other accessories as required. The sprinklers shall
be UL listed or FM approved. Sprinkler to be fitted with
50.13 100.00 EA 427.00
Teflon Tape and must be leak proof/leak tight. The
make may be of NewAge, HD Fire, Spraysafe, Tyco,
Viking etc
The work shall be carried out ina warehouse at all
heights upto 6 M.

50.14 150 mm dia 2.00 EA 19626.00

RCC inspection chamber size 900 x 450 and depth upto

51.14 3 Nos 12115.00
600mm

Supply and fixing High Density Polymer Water pipe as

per IS 4984, PE-63 grade,10 Kg/sqcm rating for
52.14 borewell including all fittings etc. 250 M 132.00
40mm dia HDPE pipe for borewell at a depth above
100m

52.15 Light points (with 2.5 sq.mm. cu. wire)---- Full points 15 EA 1999.00
 RCC Hume Pipes - 300 mm dia. R.C.C. pipe
Providing and laying non-pressure NP2 class (light duty)
R.C.C. pipes with collars jointed with stiff mixture of
53.15 cement mortar in the proportion of 1:2 (1 cement : 2 50 M 598.00
fine sand) including testing of joints etc. complete :
Light Duty

Providing & Fixing Glazeing in with Toughened glass

pans of 6mm thk. alluminium window EPDM rubber /
54.15 new prene gaskate it is complected archti drg. And 25 M2 1158.00
direction engg- in charage (cost of alliuminium snap
bedding shall be paid in seperately in above item ).

110 mm dia UPVC rain water down take pipe Same as

55.15 100 Rmt 273.00
above but 110 mm dia.

55.16 100 mm dia 2.00 EA 13311.00

56.16 Supply, Installation, testing & commissioning of butterfl 4.00 EA 6462.00

Supply, Installation, testing & commissioning of

Analogue Addressable strobes cum hoooters
(conventional hooters + control module )
(Specification :- 110 cd light & 85 dB with adjustable
57.16 5 EA 4,879.00
DB) at different locations complete with all fixing
accessories, etc under false ceiling roof, wall etc.
interconnecting to loop cable complete as required.
(Make : Morley Honeywell, Schrack, or equivalent)
 PCC (1:4:8) Providing and laying Plain Cement Concrete
of nominal volumetric mix 1:4:8 (1 Cement: 4 Sand: 8
Crushed stone aggregates) with 40 mm and down size
graded aggregates below RCC foundations and grade
slab & any other work as per requirement including any
58.16 required permanent brick /stone masonry including 5 M3 4853.00
shuttering, dewatering, tamping, ramming, curing, etc
with all leads & lifts and all complete as per instructions
of CONSULTANT/IOCL Engineer-in- Charge. All PCC
Work shall be carried out Strictly as per Specification for
Plain & Reinforced Cement Concrete.

Supply, Installation, testing, Commissioning of 600 mm

dia. 240V, 1-Ph, AC heavy duty non flameproof, air
54.15 circulator fan including starter, kaul, mounting bracket 4 EA 5848.00
and other accessories. (Suitable for wall/structure
mounting type).

Supplying, erecting and fixing in position plain sheet

600 mm wide Colour coated galvalume ridge cap and
corner flushing rolled from 0.58 mm TCT BHP Zincalume
AZ-150 High tensile steel (Minimum yield strength of
275 Mpa) including fixing to Sheets stiched by (4.8 x 16
55.15 mm) Hex head stitch screws with metal bounded EPDM 50 M2 416.00
washers complete in all respects inclusive of cost of all
labour, materials, tool, tackles etc. as per specification
and direction of Site Engineer/ Engineer-in-Charge. The
specification of plain sheet for Ridge shall be the same
as of clip-on sheet.

Industrial type surface mounted low bay type fixture

suitable 90W LED lamp with integral Driver and IP-54
55.16 class of protection,equivalent to Bajaj Catalogue no.- 2 EA 9963.00
BJHFL80LED, Crompton Catalogue no.:-LHB90CDL/61,
Wipro catalogue no.- LH01-751-XXX-50-XX

RO water purifier with storage of min. 5 lit water. Make

56.16 1 Nos 18684.00
Eureka forbes or Kent or equivalent.
57.16 Water Cooler 1 Nos 18684.00

57.17 25 x 3 mm Hot Dipped G.I. Strip 400 M 44.00

RCC conical manhole 1200 mm dia at bottom and 530

58.17 1 Nos 17093.00
mm dia at top and depth of 1.5 mtr.

Response Indicators – Visual - Supply, Installation,

Testing and Commissioning of visual indicators when the
detector in that particular area/zone has been activated
59.17 4 EA 4,264.00
due to smoke of fire. The control room of the plant
should be provided with separate visual alarm. (Make :
Morley Honeywell, Schrack, or equivalent)

60.17 Supply, Installation, testing & commissioning of UL appro 15.00 EA 1120.00

Demolishing C.C. /R.C.C. work by mechanical means

and stockpiling at designated locations and disposal of
61.17 dismantled materials up to a lead of 1000m, stacking 10 M3 1543.00
serviceable and unserviceable material separately
including cutting reinforcement bars.
61.18 3C x 4 Sq. mm, 'YWY' cable 40 EA 370.00

MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE

MCB Supply & fixing of MCB Distribution Board double
door type inclusive of MCB, Three Phase, as per
62.18 Approved Make of following types: (MCB - 10KA 1 EA 14183.00
Breaking Capacity) 4 way DB with 63A FP RCBO, 300
mA sensitivity as incoming - 1No.& 6 to 16A SP as
outgoing - 4 Nos. for each phase.

62.19 3 .5C x 150 Sq. mm, 'A2XFY' cable 10 EA 1402.00

6 Amps. Plug Point(with 2.5 sq.mm. cu. wire) ----- Half

62.20 10 EA 1398.00
point (installed on switchbox, etc.)

63.20 Supply, installation, testing & commissioning of Flow Switch4.00

of size : 150
EA mm dia
3291.00
(UL listed / FM approved

63.21 3 .5C x 95 Sq. mm, 'A2XFY' cable 10 EA 1230.00

 Response Indicator – Audio/Hooter - Supply,
Installation, Testing and Commissioning of 1 Number of
Hooter/ Siren for 1 km distance to be installed at the
64.21 roof top of the plant. The alarm should be of horn cum 1 EA 12,300.00
strobe type and should be intelligent addressable with
main panel. (Make : Morley Honeywell, Agni, Kheraj or
equivalent)

Providing and fixing in position 25 litres instant type

65.21 1 Nos 11755.00
water heater

66.21 Supply,Installation,Testing, Commissioning of Ball valves 4.00 EA 2770.00

6 Amps. Plug Point(with 2.5 sq.mm. cu. wire) ---- Full

66.22 5 EA 2177.00
points

Industrial type double compression nickel plated brass

cable gland, crimping type tinned copper lugs &
termination/fixing of the same including supply of
63.20 4 EA 2687.00
crimping type tinned copper lugs & PVC/XLPE cable
hoods etc for the following cable sizes.
1C X 630 A2XWaY
 Sanitary and Water Supply Fittings Note: All catalogue
nos. referred in various items of sanitary fittings are as
per Hindustan Sanitary ware catalogues
Water Closet---- Providing and fixing vitreous china dual
purpose closet suitable for use as squatting pan or
European type water closet (Anglo Indian W.C pan) with
seat lid with C.P. brass hinges and rubber buffers, 10
64.20 litre low level flushing cistern with fitting and brackets, 2 Nos 5300.00
40mm flush bend 20mm over flow pipe with specials of
standard make and mosquito proof coupling of approved
municipal design complete, including painting of fittings
and brackets, cutting and making good the walls and
floors wherever required :White vitreous china dual
purpose WC pan with white solid plastic seat and lid with
white vitreous china flushing cistern and C.P. flush bend.

Supply, Installation, Testing and Commissioning of

Addressable intelligent type fault isolator module
with LED indicator for isolating shorted, de-wired and
65.20 5 EA 2,050.00
loose circuits between two successive fault isolators with
auto reset arrangement. (Make : Morley Honeywell,
Schrack, or equivalent)

66.20 Providing and fixing G.I. Pipes---40mm 20 Rmt 428.00

Switch-box (excluding the supply of switch-box and

66.21 6 EA 1388.00
switches) -- Half points ( From switchbox to switchbox)
 Providing and fixing in position white vitreous
‘Hindustan’ Parryware or other approved make flat back
urinals small size 355 x 465 large size 400 x 610
consisting of the following and inclusive of making water
and drain connections.
a) C.P. brass waste coupling.
b) C.P. brass bottle trap with extension piece and wall
flange.
c) High Level 1st quality P.V.C. flushing cistern
67.21 2 Nos 4032.00
‘Commander’ , ‘Champion’ or ‘Parryware’ ‘Slimline’
make with all accessories like C.I. or M.S. fixing
brackets, overflow pipe, waste coupling, C.P. brass
chain and handle, 15 dia C.P. brass angle stop cock and
10 dia C.P./P.V.C. connector pipe.
d) Flush valve (push button and 0.53 GPF/2.0LPF.
e) C.P. flush pipe with C.P. distribution arms and C.P.
spreaders for set of one, two and three urinals.
All above items are required for 1 Set of Urinal

Demolishing brick work manually/mechanical means

including stacking of serviceable material & disposal of
68.21 10 M3 804.00
unserviceable material outside site at unobjectionable
place & as/direction of Engineer-in-charge.

Manual Call Points - Supply, Installation, Testing and

Commissioning of addressable manual call points along
with mounting back base complete with push button,
enclosed in box with provision for cable or conduit
coupling. The unit to be painted fire red outside, white
69.21 inside. The unit shall be located near the exits/ staircase 5 EA 1,558.00
/ strategic locations, should be wall mounted with break
the galss/pull down cover type. The unit shall be
addressable and communicate with main panel like
other detectors. (Make : Morley Honeywell, Schrack, or
equivalent)

70.21 Supply, installation, testing and commissioning of press 2.00 EA 3718.00

71.21 Providing and fixing G.I. Pipes--25mm 25 Rmt 293.00

70.21 Supply, installation , testing and comissiong of 25 mm dia 4.00 EA 1829.00

70.22 Light points (with 2.5 sq.mm. cu. wire)------Half points 5 EA 1331.00

Supply and fixing DB in steel sheet enclosure with 4-

71.22 pole MCCB of breaking capacity 16 KA of 100 Amp, as 1 EA 6420.00
per specifications and direction of Engineer in Charge

6/16 Amps. Plug Point(with 4 sq.mm. cu. wire)---- Full

71.23 2 EA 2904.00
points

72.23 Providing and fixing G.I. Pipes---15mm 30 Rmt 188.00

 Supply and laying of 900 mm wide, 6 mm thick rubber
72.24 2 M 2748.00
floormat.

SW Pipes
Providing, laying and jointing glazed stoneware pipes
class SP-1 with stiff mixture of cement mortar in the
proportion of 1:1 (1 cement : 1 fine sand) including
testing of joints etc. complete : for 150 mm dia
73.24 5 Rmt 1003.00
pipe.This also includes Providing and laying cement
concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
stone aggregate 40 mm nominal size) all-round S.W.
pipes including bed concrete as per standard design for
150 mm SW Pipe

Providing and laying class-B 50mm dia GI pipe for cable

74.24 routing under flooring/ EB post leading including sealing 10 M 482.00
both ends with jute and Bitumen

Multi sensor type Smoke Detectors - Supply,

Installation, Testing and Commissioning of Addressable
75.24 intelligent Multi sensor type smoke detectors along with 2 EA 2,378.00
mounting base for panel and electric room. (Make :
Morley Honeywell, Schrack, or equivalent)

DPC 40 mm thick with CC 1:2:4

Providing and laying damp-proof course 40mm thick
with cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 12.5mm nominal size). Item
includes mixing water proofing material in cement
76.24 concrete work @ 1 kg per 50kg of cement. Applying a 10 M2 465.00
coat of residual petroleum bitumen of grade VG-10 of
approved quality using 1.7kg per square meter on damp
proof course after cleaning the surface with brushes &
finally with a piece of cloth lightly soaked in kerosene
oil.
 Supply, Installation, Testing and Commissioning of LED
base Emergency Exit signage with 3 hours battery
77.24 1 EA 4,510.00
backup etc. as required. (Make : ANG / Prolite / Autolite
/ MDS or equivalent).

Supply, Installation, testing & commissioning of 15 mm

size Sidewall type sprinklers of brass/bronze with
chrome plated of standard design having K-80,
Quartzoid bulb of rating 680 C, Standard Response (SR)
with other accessories as required. The sprinklers shall
be UL listed or FM approved. Sprinkler to be fitted with
78.24 10.00 EA 444.00
Teflon Tape and must be leak proof/leak tight. The
make may be of NewAge, HD Fire, Spraysafe, Tyco,
Viking etc
The work shall be carried out ina warehouse at all
heights upto 6 M.

Heat Detectors - Supply, Installation, Testing and

Commissioning of Addressable Heat detectors along with
79.24 2 EA 2,173.00
mounting base for Pentry and Kitchen area. (Make :
Morley Honeywell, Schrack, or equivalent)

Supply, cutting, laying GI pipe of 50 mm under Fire

79.25 10.00 M 393.00
hydrant pipeline.

Partition wall between Urinals Supplying & fixing granite

partition 16 mm thick between urinals.(Size 1000x600)
80.25 2 Nos 1910.00
as per direction of IOCL/CONSULTANT Engineer in
charge
 6/16 Amps. Plug Point(with 4 sq.mm. cu. wire) ---- Half
80.26 2 EA 1875.00
point

80.27 4C x 25 Sq. mm, 'A2XFY' cable 6 EA 610.00

20A, 1 phase metalclad, polycarbonate body power plug

80.28 point with DP ELMCB, plug and socket. The enclosure 1 EA 3607.00
shall be 14SWG, M.S., milky white powder coated type.

81.28 Wash Basins--460 dia circular or oval 2 Nos 1615.00

Supply and installation of 19 mm dia. Hot dipped G.I.

(85 micron thick) lightning rod, 1200mm long, on & the
highest point of the building / structure / chimney, etc.,
81.26 1 EA 2996.00
complete with all hardwares, labour and materials, as
per standard drawing, specifications and directions of
Engineer-in-charge

Supply, Installation, Testing and Commissioning of

82.26 Addressable Control Module. (Make : Morley Honeywell, 1 EA 2,624.00
Schrack, or equivalent)
 Supply, Installation, Testing and Commissioning of
83.26 Addressable Monitor Module. (Make : Morley Honeywell, 1 EA 2,460.00
Schrack, or equivalent)

83.27 4C x 25 Sq. mm, 'A2XFY' cable with FRLS insulation 10 M 243.00

83.28 Sand buckets with stand (3 nos. buckets in a stand ) 1 EA 2235.00

Wiring for light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FR PVC insulated copper
conductor single core cable in surface / recessed
83.29 medium class PVC conduit, with modular switch, 3 EA 710.00
modular plate, suitable GI box and earthing the point
with 1.5 sq.mm. FR PVC insulated copper conductor
single core cable etc as required.

84.29 Hand Jet Spray 2 Nos 991.00

84.30 4C x 16 Sq. mm, 'A2XFY' cable with FRLS insulation 10 M 197.00

85.30 Providing and fixing CP brass Stop cock : for 15 mm dia. 3 Nos 642.00

86.30 Supply, Installation, testing & commissioning of S.S. Rossat15.00 EA 111.00

87.30 SW Trap--150 mm dia. 4 Nos 397.00

88.30 mirror 600x450 size 2 Nos 791.00

89.30 Providing and fixing CP brass bib cock : 15 mm dia. 3 Nos 475.00

90.30 PIPE CONNECTION 25MM TO 40 MM 4 Nos 351.00

91.30 C.P. Towel Rail--20 mm dia 600 mm long 3 Nos 465.00

91.31 Shock Treatment chart complete with frame and glass 1 EA 1229.00

91.32 First aid box 1 EA 1229.00

91.33 4C x 16 Sq. mm, 'A2XFY' cable 2 EA 610.00

Epoxy Finished Flooring Epoxy Painting in Floor for

92.33 marking as directed by IOCL/CONSULTANT Engineer in 10 M2 113.00
change and as per Manufacturer Specification

Supply and Installation of 200x200mm Power coated LA

93.33 1 EA 1096.00
junction box fabricated from 2.5mm thick Sheet
94.33 PIPE CONNECTION 15MM TO 25 MM 4 Nos 247.00

95.33 Towel Ring 3 Nos 247.00

96.33 Toilet Paper Holder 2 Nos 353.00

97.33 Liquid Soap Container 3 Nos 188.00

97.34 Rubber hand gloves a) 415 V Grade 1 EA 421.00

97.35 8 SWG Hot dipped G.I wire 10 M 28.00

97.36 Caution board a) 415 V Grade 1 EA 224.00

Making khurras 45 cm x45 cm with average min

98.36 1 Nos 173.00
thickness of 5 cm cement concrete 1:2 :4

99.36 Providing gola 75x75 mm in cement concrete 1:2:4 1 Nos 132.00

Supply & Laying horizontally and vertically of PVC/XLPE

insulated cables of following sizes on cable trays,
supported on steel structures, in ready made trenches
and / or to pull-through pipes. The rates shall include
the supply and fixing of aluminium number tags, G.I.
100.36 saddles / clamps, saddle bars, etc, including
transportation from supply store to the place of
installation, unpacking and return the cable drums to
site stores with all labour and materials as per the
standard specifications, drawings and directions of
Engineer-in-charge.

Termination of PVC/XLPE insulated cables of different

sizes and connection of the Leads including supply of
weather proof double compression type cable glands
and tinned copper lugs, including cutting / stripping of
cable insulation, fixing of cable glands, crimping of the
101.36 cable cores, marking with wire number ferrules, etc.,
including all labour and materials, as per standard
specifications and cable drums to site stores with
alllabour and materials as per the standard
specifications, drawings and directions of Engineerin-
charge.
 PERFORATED GI CABLE TRAY
Supplying, fabricating and installing following sizes of
perforated GI cable trays including horizontal and
vertical bends, reducers, tees, cross members and other
102.36 accessories as required and duly suspended from the
ceiling and/or fix to steel/RCC columns, beams or any
other structure members with MS suspenders, angles,
channels, etc complete as per the direction of Engineer
in charge.

Supply,Installation, connection and testing of following

lighting fixtures with suitable lamps and 'junction box
(100mmx100mm) provided for point wiring, with lamps
and suitable control gear box, 'including supply of all
101.36
hardware like anchor fasteners, bolts, etc. required for
installation, labour and 'materials as per standard
specifications,drawings and directions of Engineer-in-
charge.

Point wiring of the light points, ceiling fans, exhaust fans

and power plug points from the lighting panels / control
switch-boxes to the various light / fan / power plug
points, using Medium duty 25mm dia PVC conduits and
conduit fittings. Embedding the same in R.C.C. slabs,
beams and walls in concealed manner, with 1100V
grade FRLS type PVC insulated, colour coded, 2.5 / 4
sq.mm stranded copper conductorwires from approved
makes for phase and neutral conductors and 1.5/2.5sq
mm FRLS PVC Insulated copper wire forearth conductor
The switch-boxes shall be embedded in wall and be
made of 14SWG M.S. sheet with milky white / matching
colour PVC covers with brass / rust-proof wall fixing
101.36
screws, as approved by Engineer-in-charge. Switches,
Setp type 'Electronic fan regulator, etc., on the same
phase shallbe housed in the same switch-box. Switches
shall be modular Piano type and from approved makes
only. The mode of mesurement of wiring to the various
points will as under. Each switch / MCB and the
corresponding point shall be considered as one full
point. Where one switch / MCB controls more than one
point, the first point from the switch / MCB shall be
considered as one full point and the other points in the
group shall be considered as half point each. The wiring
'specified here will cover the circuits from switchbox/
lighting panel to the point outlets only.
 Supply, installation, testing and commissioning of Hot
Dipped G.I. (85 Micron thick) /Copper earthing loop /
grid conductors of following sizes along the cable
trenchs / cable trays / on the wall or structures / buried
in ground (500mm depth) including excavation and back
102.36 filling. Installation shall include the welding at joints and
providing anti corrosive point (black butimine) at the
welded portion and clamping using G.I. clamps and
necessary hardware and materials as per standard
drawings, specifications and directions of Engineer-in-
charge.

Supply and installation of the following items including

103.36 supply of necessary hardware, as per directions of
Engineer-in-charge.

Part B. Addressable Smoke detection with Fire alarm panel

Work under Part B has to be carryied out from the Approved
104.36 Licensed Agencies of Directorate of Maharashtra Fire
Services, having license for that work.

Part C. Automatic Sprinkler System

105.36 Work under Part C has to be carryied out from the Approved
Licensed Agencies of Directorate of Maharashtra Fire
Services, having license for that work.
 Supply, cutting, welded, Installation, testing &
commissioning of class ‘C’ heavy duty G I pipe
conforming to IS 1239 including fittings like internal
threaded coupling suitable for sprinklers, elbows, tees,
flanges, tapers, nuts bolts, gasket etc. fixing the pipe on
the wall / ceiling with suitable clamps and painting with
two or more coats of synthetic enamel paint (after
applying etch primer as per specifications) of required
106.36
shade of Fire Red complete as required. The item also
includes fully welded 200 mm saddle/pad plate of same
pipe in 1/4th perimeter at bottom over supports.
Structural steel required for pipeline support or laying
on wall / ceiling or columns etc shall be paid under
separate item. The connection/welding job of Sprinkler
system with main hydrant line will also be part of this
item.

Supply, Installation,Testing, Commissioning of Hand

Wheel Operated Gate Valves rising spindle type of
following sizes on the pipeline including supply and
101.36
fixing 3mm thk CAF gaskets, studs/ nuts, flanges,
making flanges joint etc of approved make for the
following sizes as per specifications and site instructions.
22919100
 6086400

28735200
4580928

3625128
 3120000

1953844.8

1692512
1441440

1032300

960000

831344
812700

792800

587950

527800

481600
433650

400000

395000

379500
797500

332000

328000

297600

276650
275660

267800

266400
265000

264500

264500
256500

219240

217300
215400

201390

192960
186570

179400

174000

160500
123444

159080

157500
156500

147600

147600
145500

145500

133438

129600

121000
114700

112200

101400

100000
96100

95310

93100

86400

72660
68500

68472

64828

63300
55500

48500

47728

47508

43440
42700

39252

36345

33000

29985
29900

28950

27300

26622

25848

24395
24265

23392

20800

19926

18684
18684

17600

17093

17056

16800

15430
14800

14183

14020

13980

13164

12300
12300

11755

11080

10885

10748
10600

10250

8560

8328
8064

8040

7790

7436
7325

7316

6655

6420

5808

5640
5496

5015

4820

4756

4650
4510

4440

4346

3930

3820
3750

3660

3607

3230

2996

2624
2460

2430

2235

2130

1982

1970
1926

1665

1588

1582

1425

1404
1395

1229

1229

1220

1130

1096
988

741

706

564

421

280
224

173

132

0
0

0
0

0
 0

91275924