Extra Feed Swing PDF
Extra Feed Swing PDF
A P PL ICA TI ON ZR 32 P BOO M
Extra feed swing is optional for Sandvik DL310-5 and Parallel coverage 3 255 mm
DL310-7 longhole drilling units. The standard ZR20 Feed extension
boom is replaces with ZR32P which gives 3.2m parallel LF 704 985 mm
coverage. This extra coverage is done with rotation LF 705 1 050 mm
LF 706 1 200 mm
actuator that turns the drilling module around its own
Boom weight, net 2 800 kg
axis. This feature makes also possible to drill close to
Rotation angle 360°
both size walls.
Stinger extension (rear) 1 500 mm
GENERAL DIMENSIONS
30° 30°
‘
DL310-7
2 840 (LF 704)
3 140 (LF 705)
3 450 (LF 706)
360°
DL310-5
1 615
2 680 3 100 1 040
9 640
15° 30°
TRAMMING DIMENSIONS
2 860
2 145
1 945
17° 17°
1 600
2 680 3 100
8 660
40°
R 3 290
R 5 750
COVERAGE AREA
225 without RC
530 with RC
90°
610 530 WP 530
R770
3 255 parallel
1 715
1 900
Optional
LF 704 1 700
LF 705, 706 2 000
775
H
530
90°
HR
30°
W
30°
MINIMUM DRIFT SIZE FOR DL310-5 MINIMUM DRIFT SIZE FOR DL310-7
Drilling Drilling
H W WP HR H W WP HR
module module
LF 704 3 140 3 140 1 880 1 615
LF 704 3 040 3 040 1 780 1 615
LF 705 3440 3 440 2 180 1 615
LF 705 3 340 3 340 2 080 1 615 LF 706 3 750 3 750 2 490 1 615
LF 706 3 650 3 650 2 390 1 615 Included 100 mm clearance on each side
Included 100 mm clearance on each side MAXIMUM DRIFT SIZE FOR DL310-7
MAXIMUM DRIFT SIZE FOR DL310-5 Drilling
H W WP HR
Drilling module
H W WP HR
module LF 704 3 900 4 800 3 255 1 870
LF 704 3 900 4 800 3 255 1 870 LF 705 4 200 5 100 3 255 1 870
LF 705 4 200 5 100 3 255 1 870 LF 706 4 350 5 250 3 255 1 870
LF 706 4 350 5 250 3 255 1 870 With rear stingers in use without optional front stinger
With rear stingers in use without optional front stinger
Sandvik Mining and Construction reserves the right to change this specification without further notice.