QUAD 2-INPUT
NAND GATE
• Outputs Source/Sink 24 mA
• ′ACT00 Has TTL Compatible Inputs

VCC
14 13 12 11 10 9 8

N SUFFIX
CASE 646-06
PLASTIC

1 2 3 4 5 6 7
GND

D SUFFIX
CASE 751A-03
PLASTIC

MAXIMUM RATINGS*
Symbol Parameter Value Unit
VCC DC Supply Voltage (Referenced to GND) –0.5 to +7.0 V
Vin DC Input Voltage (Referenced to GND) –0.5 to VCC +0.5 V
Vout DC Output Voltage (Referenced to GND) –0.5 to VCC +0.5 V
Iin DC Input Current, per Pin ±20 mA
Iout DC Output Sink/Source Current, per Pin ±50 mA
ICC DC VCC or GND Current per Output Pin ±50 mA
Tstg Storage Temperature –65 to +150 °C
* Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended
Operating Conditions.

FACT DATA
5-1
 MC74AC00 MC74ACT00
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Typ Max Unit
′AC 2.0 5.0 6.0
VCC Supply Voltage V
′ACT 4.5 5.0 5.5
Vin, Vout DC Input Voltage, Output Voltage (Ref. to GND) 0 VCC V
VCC @ 3.0 V 150
Input Rise and Fall Time (Note 1)
tr, tf VCC @ 4.5 V 40 ns/V
′AC Devices except Schmitt Inputs
VCC @ 5.5 V 25

Input Rise and Fall Time (Note 2) VCC @ 4.5 V 10

tr, tf ns/V
′ACT Devices except Schmitt Inputs VCC @ 5.5 V 8.0
TJ Junction Temperature (PDIP) 140 °C
TA Operating Ambient Temperature Range –40 25 85 °C
IOH Output Current — High –24 mA
IOL Output Current — Low 24 mA
1. Vin from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times.
2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.
DC CHARACTERISTICS
74AC 74AC
VCC TA =
Symbol Parameter TA = +25°C Unit Conditions
(V) –40°C to +85°C
Typ Guaranteed Limits
VIH Minimum High Level 3.0 1.5 2.1 2.1 VOUT = 0.1 V
Input Voltage 4.5 2.25 3.15 3.15 V or VCC – 0.1 V
5.5 2.75 3.85 3.85
VIL Maximum Low Level 3.0 1.5 0.9 0.9 VOUT = 0.1 V
Input Voltage 4.5 2.25 1.35 1.35 V or VCC – 0.1 V
5.5 2.75 1.65 1.65
VOH Minimum High Level 3.0 2.99 2.9 2.9 IOUT = –50 µA
Output Voltage 4.5 4.49 4.4 4.4 V
5.5 5.49 5.4 5.4
*VIN = VIL or VIH
3.0 2.56 2.46 –12 mA
V
4.5 3.86 3.76 IOH –24 mA
5.5 4.86 4.76 –24 mA
VOL Maximum Low Level 3.0 0.002 0.1 0.1 IOUT = 50 µA
Output Voltage 4.5 0.001 0.1 0.1 V
5.5 0.001 0.1 0.1
*VIN = VIL or VIH
3.0 0.36 0.44 12 mA
V
4.5 0.36 0.44 IOL 24 mA
5.5 0.36 0.44 24 mA
IIN Maximum Input
5.5 ±0.1 ±1.0 µA VI = VCC, GND
Leakage Current

IOLD †Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max

Output Current
IOHD 5.5 –75 mA VOHD = 3.85 V Min

ICC Maximum Quiescent

5.5 4.0 40 µA VIN = VCC or GND
Supply Current
* All outputs loaded; thresholds on input associated with output under test.
† Maximum test duration 2.0 ms, one output loaded at a time.
Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.

FACT DATA
5-2
 MC74AC00 MC74ACT00
AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)
74AC 74AC
TA = –40°C
VCC* TA = +25°C Fig.
Symbol Parameter to +85°C Unit
(V) CL = 50 pF No.
CL = 50 pF
Min Typ Max Min Max
3.3 2.0 7.0 9.5 2.0 10.0
tPLH Propagation Delay ns 3-5
5.0 1.5 6.0 8.0 1.5 8.5
3.3 1.5 5.5 8.0 1.0 8.5
tPHL Propagation Delay ns 3-5
5.0 1.5 4.5 6.5 1.0 7.0
* Voltage Range 3.3 V is 3.3 V ±0.3 V.
Voltage Range 5.0 V is 5.0 V ±0.5 V.

DC CHARACTERISTICS
74ACT 74ACT
VCC TA =
Symbol Parameter TA = +25°C Unit Conditions
(V) –40°C to +85°C
Typ Guaranteed Limits
VIH Minimum High Level 4.5 1.5 2.0 2.0 VOUT = 0.1 V
V
Input Voltage 5.5 1.5 2.0 2.0 or VCC – 0.1 V

VIL Maximum Low Level 4.5 1.5 0.8 0.8 VOUT = 0.1 V
V
Input Voltage 5.5 1.5 0.8 0.8 or VCC – 0.1 V

VOH Minimum High Level 4.5 4.49 4.4 4.4 IOUT = –50 µA
V
Output Voltage 5.5 5.49 5.4 5.4

*VIN = VIL or VIH

4.5 3.86 3.76 V –24 mA
IOH
5.5 4.86 4.76 –24 mA
VOL Maximum Low Level 4.5 0.001 0.1 0.1 IOUT = 50 µA
V
Output Voltage 5.5 0.001 0.1 0.1

*VIN = VIL or VIH

4.5 0.36 0.44 V 24 mA
IOL
5.5 0.36 0.44 24 mA
IIN Maximum Input
5.5 ±0.1 ±1.0 µA VI = VCC, GND
Leakage Current

∆ICCT Additional Max. ICC/Input 5.5 0.6 1.5 mA VI = VCC – 2.1 V

IOLD †Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max

Output Current
IOHD 5.5 –75 mA VOHD = 3.85 V Min

ICC Maximum Quiescent

5.5 4.0 40 µA VIN = VCC or GND
Supply Current
* All outputs loaded; thresholds on input associated with output under test.
† Maximum test duration 2.0 ms, one output loaded at a time.

FACT DATA
5-3
 MC74AC00 MC74ACT00
AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)
74ACT 74ACT
TA = –40°C
VCC* TA = +25°C Fig.
Symbol Parameter to +85°C Unit
(V) CL = 50 pF No.
CL = 50 pF
Min Typ Max Min Max
tPLH Propagation Delay 5.0 1.5 5.5 9.0 1.0 9.5 ns 3-5

tPHL Propagation Delay 5.0 1.5 4.0 7.0 1.0 8.0 ns 3-5
* Voltage Range 5.0 V is 5.0 V ±0.5 V.

CAPACITANCE
Value
Symbol Parameter Unit Test Conditions
Typ
CIN Input Capacitance 4.5 pF VCC = 5.0 V

CPD Power Dissipation Capacitance 30 pF VCC = 5.0 V

FACT DATA
5-4
 MC74AC00 MC74ACT00
OUTLINE DIMENSIONS

N SUFFIX
PLASTIC DIP PACKAGE
CASE 646–06 NOTES:
ISSUE L 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE
POSITION AT SEATING PLANE AT MAXIMUM
14 8 MATERIAL CONDITION.
2. DIMENSION L TO CENTER OF LEADS WHEN
B FORMED PARALLEL.
3. DIMENSION B DOES NOT INCLUDE MOLD
1 7 FLASH.
4. ROUNDED CORNERS OPTIONAL.
INCHES MILLIMETERS
A DIM MIN MAX MIN MAX
A 0.715 0.770 18.16 19.56
F L B 0.240 0.260 6.10 6.60
C 0.145 0.185 3.69 4.69
D 0.015 0.021 0.38 0.53
F 0.040 0.070 1.02 1.78
C G 0.100 BSC 2.54 BSC
H 0.052 0.095 1.32 2.41
J J 0.008 0.015 0.20 0.38
N K 0.115 0.135 2.92 3.43
L 0.300 BSC 7.62 BSC
SEATING
PLANE K M 0_ 10_ 0_ 10_
H G D M N 0.015 0.039 0.39 1.01

D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751A–03
ISSUE F NOTES:
1. DIMENSIONING AND TOLERANCING PER
–A– ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
14 8 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
–B– P 7 PL 5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
1 7
0.25 (0.010) M B M PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
MILLIMETERS INCHES
G R X 45 _ F DIM MIN MAX MIN MAX
C A 8.55 8.75 0.337 0.344
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
D 0.35 0.49 0.014 0.019
–T– F 0.40 1.25 0.016 0.049
K M J G 1.27 BSC 0.050 BSC
SEATING D 14 PL
PLANE J 0.19 0.25 0.008 0.009
0.25 (0.010) M T B S A S K 0.10 0.25 0.004 0.009
M 0_ 7_ 0_ 7_
P 5.80 6.20 0.228 0.244
R 0.25 0.50 0.010 0.019

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

How to reach us:

USA/EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315

MFAX: RMFAX0@email.sps.mot.com –TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

*MC74AC00/D*
◊ FACT DATA MC74AC00/D

5-5