Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 166 views

    ISO 3302-1:1996 (E) : M-Class

    Uploaded by

    Marcos Antonio Rossi
    The document discusses tolerances for dimensions in molded rubber parts. It defines two types of dimensions: fixed dimensions (F) which are unaffected by flash or part displacement, and closure dimensions (C) which can change due to these factors. Standard tolerance classes (M1-M4) are provided for both dimension types, with fixed tolerances based on size and closure tolerances set by the largest closure dimension. Tolerances can be selected from these classes based on an agreement between relevant parties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ISO 3302-1:1996 (E) : M-Class

    Uploaded by

    Marcos Antonio Rossi
    166 views2 pages
    The document discusses tolerances for dimensions in molded rubber parts. It defines two types of dimensions: fixed dimensions (F) which are unaffected by flash or part displacement, and closure dimensions (C) which can change due to these factors. Standard tolerance classes (M1-M4) are provided for both dimension types, with fixed tolerances based on size and closure tolerances set by the largest closure dimension. Tolerances can be selected from these classes based on an agreement between relevant parties.

    Original Description:

    ISO 3302 Mold

    Original Title

    ISO_3302_MOLD

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses tolerances for dimensions in molded rubber parts. It defines two types of dimensions: fixed dimensions (F) which are unaffected by flash or part displacement, and closure dimensions (C) which can change due to these factors. Standard tolerance classes (M1-M4) are provided for both dimension types, with fixed tolerances based on size and closure tolerances set by the largest closure dimension. Tolerances can be selected from these classes based on an agreement between relevant parties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    166 views2 pages

    ISO 3302-1:1996 (E) : M-Class

    Uploaded by

    Marcos Antonio Rossi
    The document discusses tolerances for dimensions in molded rubber parts. It defines two types of dimensions: fixed dimensions (F) which are unaffected by flash or part displacement, and closure dimensions (C) which can change due to these factors. Standard tolerance classes (M1-M4) are provided for both dimension types, with fixed tolerances based on size and closure tolerances set by the largest closure dimension. Tolerances can be selected from these classes based on an agreement between relevant parties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    1

    

    

    

    ISO 3302-1:1996 (E)
    M-Class

    Fixed dimensions and closure dimensions: In moulding a rubber product, more rubber is used than is
    required to fill the cavity, and the excess is flashed. This flash tends to prevent the mould sections from fully
    closing and thus affects the finishedpart dimensions.
    NOTE For products moulded by transfer or injection, it is possible to regard all dimensions as fixed.

    Two sets of tolerances, F and C, are given and are de-fined below.

    Fixed dimensions (F): Dimensions which are not affected by deforming influences like flash thickness or
    lateral displacement of different mould parts (upper and lower parts or cores). See figure 1, dimensions Ii, /2
    and /3.

    Closure dimensions (C): Dimensions which can be altered by variation in the flash thickness or lateral
    displacement of different mould parts. See figure 1, dimensions dl, d2, d3 and h.
    NOTE The dimensions for F and C can only be toleranced insofar as they are independent of each other.

    Tolerances: The tolerances to be applied shall be chosen, by agreement between the interested parties, from
    the different classes of tolerance in table 1.

    Standard tolerances are given in table 1. Fixed tolerances (F) are related by size to each dimension, but all
    closure tolerances (C) are determined by the largest closure dimension (h, see figure 1).

    MEREFSA · merefsa@merefsa.com · Cobalto, 101, 08907 Hospitalet de Llobregat, Barcelona (Spain) · Tel. 00 34 933 372 081 · Fax 00 34 933 374 373
    2
    


    ISO 3302-1:1996 (E)


    M-Class

    TOLERANCES FOR MOULDINGS Values in mm (unless indicated otherwise)

    Nominal Dimension Clase M1 Clase M2 Clase M3 Clase M4

    above up to and including F C F C F C F and C

    ± ± ± ± ± ± ±
    0 4 0,08 0,10 0,10 0,15
    4 6,3 0,10 0,12 0,15 0,20 0,25 0,40 0,50
    6,3 10 0,10 0,15 0,20 0,20 0,30 0,50 0,70
    10 16 0,15 0,20 0,20 0,25 0,40 0,60 0,80
    16 25 0,20 0,20 0,25 0,35 0,50 0,80 1,00
    25 40 0,20 0,25 0,35 0,40 0,60 1,00 1,30
    40 63 0,25 0,35 0,40 0,50 0,80 1,30 1,60
    63 100 0,35 0,40 0,50 0,70 1,00 1,60 2,00
    100 160 0,40 0,50 0,70 0,80 1,30 2,00 2,50
    160 – 0,3% 0,4% 0,5% 0,7% 0,8% 1,3% 1,5%

    MEREFSA · merefsa@merefsa.com · Cobalto, 101, 08907 Hospitalet de Llobregat, Barcelona (Spain) · Tel. 00 34 933 372 081 · Fax 00 34 933 374 373

    You might also like