Avelair

COMPRESSOR

Ultrapac HED/ALD/MSD Type 0005 to 1000

Complete purification
package with heatless
adsorption dryer, pre-,
afterfilter and level- PDI
2
controlled electronic 9
O
4
condensate drain. MIAH 02
PI 2 6 2 PI 101
8 1 2 8 MT
Product Description: 101
1 1 MISH 01
Compressed air is lead through the 13 15 101

2 2
inlet of the dryer(J) and across the 14
PDI
prefilter . At this stage, the air is
(3) 1
9 atmosphere
J
2
cleaned from particles and 3 5 Y1 Y2 5

condensate. The condensate is 1 12

7 7
11
removed via the level-controlled
Ro Ro
electronic condensate drain(11).

Via the lower shuttle valve(9), the air Volume *Regeneration air Volume flow out Pressure
Ultrapac Prefilter
flow losses (average) (min.) loss
is lead into the adsorption vessel(1), HED/ALD/ (Afterfilter)
in cfm m3/h m3/h initial
MSD MF (PE)
(1 bar, 20°C) (1 bar, 20°C) (1 bar, 20°C) mbar
in which the air is dried down to the
HED ALD MSD HED ALD MSD
required dewpoint. Via the upper
0005 3 0.7 0.8 1 4.1 4.0 3.8 50 03/05
shuttle valve(9), the air is let into an
0010 6 1.4 1.5 2 8.3 8.2 7.5 60 03/05
afterfilter(4), in which particles from
0015 9 2.1 2.3 3 12.4 12.2 11.3 90 03/05
the desiccant bed are retained. Via 0025 15 3.5 3.8 5 20.7 20.3 18.9 90 04/10
the outlet(O), the clean and dry air is 0035 21 4.9 5.3 7 29.0 28.5 26.4 100 04/10
lead into the compressed air 0050 30 7.0 7.5 10 41.4 40.8 37.7 90 05/20
network and to the point of use. 0080 47 11.2 12.0 16 66.2 65.2 60.3 100 5/20
0100 59 14.0 15.0 20 82.8 81.6 75.4 120 05/25

While one vessel is in the drying 0150 88 21.0 23.0 30 124.2 121.7 113.1 170 05/25
0175 103 24.5 26.3 35 144.9 142.7 132.0 100 05/25
phase (adsorption), the other vessel
0225 132 31.5 34.0 45 186.3 183.2 170.0 125 07/30
is being dried again (regeneration).
0300 176 42.0 45.0 60 248.3 244.7 226.2 160 07/300
A partial stream of dried air is
0375 220 52.5 56.0 75 310.4 306.1 282.8 190 07/30
expanded to atmospheric pressure
0550 323 77.0 83.0 110 455.3 447.9 414.7 180 10/30
via a nozzle(6) and lead across the 0650 382 91.0 98.0 130 538.1 529.5 490.1 220 10/30
desiccant bed for regeneration and 0850 500 119.0 128.0 170 703.6 692.6 640.9 260 15/30
via a solenoid valve(5) and a 1000 588 140.0 150.0 200 827.8 815.5 754.0 180 20/30
silencer(7) to the atmosphere. *related to 1 bar (abs) and 20 °C at intake of compressor and 7 bar (g) and 35 °C inlet temperature

www.avelair.co.uk
Avelair Limited, 9 Greyfriars Road, Bury St Edmunds, Suffolk IP32 7DX United Kingdom
Telephone +44 (0)1284 725332 Fax +44 (0)1284 725176 Email info@avelair.co.uk
 Avelair
COMPRESSOR

Ultrapac HED/ALD/MSD Type 0005 to 1000

HED/ALD DN A B C D E F
MSD “ mm mm mm mm mm mm
0005 G3⁄8 470 340 700 255 145 440
0010 G3⁄8 470 340 700 255 145 440
0015 G ⁄8
3
470 340 1060 255 310 700
0025 G ⁄2
1
470 340 1060 255 310 700
0035 G1⁄2 470 340 1060 255 310 700
0050 G ⁄4
3
670 450 1610 315 415 900
0080 G3⁄4 670 450 1610 315 415 900
0100 G1 670 450 1610 315 415 900
0150 G1 770 600 1980 465 535 1125
0175 G1 770 600 1980 465 535 1125
0225 G11⁄2 770 600 1980 465 535 1125
0300 G1 ⁄2
1
770 600 1980 465 535 1125
0375 G11⁄2 950 700 2190 530 660 1250
0550 G2 950 700 2190 530 660 1250
0650 G2 950 700 2190 530 660 1250
0850 G2 1100 800 2350 650 650 1500
1000 G2 ⁄2
1
1100 800 2350 650 650 1500

www.avelair.co.uk
Avelair Limited, 9 Greyfriars Road, Bury St Edmunds, Suffolk IP32 7DX United Kingdom
Telephone +44 (0)1284 725332 Fax +44 (0)1284 725176 Email info@avelair.co.uk
 Avelair
COMPRESSOR

Ultrapac HED/ALD/MSD Type 0005 to 1000

Features HED/ALD/MSD: Benefits Product description:

Purification package complete Turnkey system, no additional installation Ultrapac HED/ALD/MSD: Complete
with pre, afterfilter and required, all components in one package, purification package with heatless
condensate drain technically matched to each other adsorption dryer, which works on the
Prefilter with electronic, level- No compressor air losses due to condensate basis of pressure swing adsorption,
controlled drain UFM-T removal, therefore reduction of operating costs with integrated pre- and afterfilter and
All dryers in cabinet construction Optimum protection against mecanical electronic, level controlled condensate
damage and against dirt drain
Generous dimensioned filters Large filtration surface, therefore low pressure
drop and low operating costs Medium:
Display of operating status by High operating safety, since all operating status Compressed air/ nitrogen
LED can be detected easily at any time
Intermittent operation standard Link between dryer and compressor possible Pressure dewpoint:
on central applications, therefore saving of
compressed air HED: –20 °C, ALD: –40 °C, MSD:
–70 °C at 100% load
17 sizes available, matched to Custom made solutions possible, matching
the compressor flows, with exactly customer’s requirements; no oversizing
choice of pressure dewpoints of compressors neccessary, since lowest Operating pressure:
possible regeneration air requirements min. 4 bar (g)
Comprehensive option package: Flexibility in application, well thought-out max. 16 bar (g) (Type 0005-0850)
Dewpoint depending control, start- package for economical operation and safe max. 15 bar (g) (Type 1000)
up device, bypass, pneumatics system installation in the compressed air
control, change-over control etc. network
Medium temperature:
max. +50 °C
Sizing:
Operating
4 5 6 7 8 9 10 11 12 13 14 15 16 Ambient temperature:
pressure bar (g)
min. +4 °C, max. +50 °C
Correction factor
0.63 0.75 0.88 1.0 1.12 1.25 1.38 1.50 1.63 1.75 1.88 2.0 2.13
overpressure (fp)
Power supply:
Residual 230 V/ 115 V AC/ 50 – 60 Hz,
Pressure- Inlet temperature 24 V DC
Type water 20 25 30 35 40 45 50
Dewpoint °C
content
HED -20°C 0.88 g/m3 Correction factor HED 1.2 1.2 1.1 1.0 - - - Power consumption:
Temperature (fT)
Pressure dewpoint (°C) -20 -20 -20 -20 - - - approx. 40 W
ALD -40°C 0.11 g/m3 Correction factor ALD 1.2 1.2 1.1 1.0 - - -
Temperature (fT) Pressure vessel –
Pressure dewpoint (°C) -40 -40 -40 -40 - - - design,manufacture, testing:
MSD -70°C 0.0027 g/m3 Correction factor MSD 1.0 -1.0 1.0 1.0 0.8 0.7 0.5 Absorber: acc. to 87/404/EEC
Temperature (fT) Filter: acc. to 97/23/EC
Pressure dewpoint (°C) -70 -70 -70 -70 -65 -55 -50
Example: Declaration of conformity:
Vcorr = Vnom = 200 m3/h, inlet temperature = 30°C, operating pressure = 10 bar (g), Type 0005 – 0175:
fp * ft PDP -40°C acc. to 73/23/EEC
Vcorr = 200 m3/h = 131.8 m3/h. Calculated dryer size: Ultrapac ALD, type 0150 Type 0225 – 1000:
1.38 * 1.1 acc. to 97/23/EC

www.avelair.co.uk
Avelair Limited, 9 Greyfriars Road, Bury St Edmunds, Suffolk IP32 7DX United Kingdom
Telephone +44 (0)1284 725332 Fax +44 (0)1284 725176 Email info@avelair.co.uk