XCMG Construction Machinery Co., Ltd.

Address: NO.99 North Kunpeng Road, Xuzhou Economic Development Zone, jiangsu, China 221004
XCMG FOR YOUR SUCCESS Tel: +86-51687560288 FAX: +86-51683111363 E-mail: sales@xcrmg.com Website: http://www.xcmg.com

XCMG Construction Machinery Co., Ltd.

XC870K/XC870HK

Product Overview Characteristics

XC870K/XC870HK is a K series backhoe loader newly launched by XCMG. This product is upgraded on the basis Performance features
of the mature equipment and technical performances of present products, including the upgrade of engine emis-
sion, lightweight upgrade of structural parts, and optimization of working device parameters, to further improve the The overall layout and the axle load distribution are more reasonable to achieve better traveling stability and the
comfort, safety, maintainability, reliability, supportability, and economy of the product. maximum traveling speed is up to 40km/h to realize faster site transfer speed.

The domestic leading hydraulic system distribution technology features high energy-saving and efficiency. The
maximum flow is 154L/min to meet the configuration demands of more attachments.

It can be applied with diversified environment adaptability technologies, including the high temperature, low
temperature, highland, and heavily dusty environments, upon the user’s customization depending on own needs.

The highest breakout force on the loading end is leading the industry by 15%~20% compared with like models. The
advanced structure and hinge points on the digging end and the industry’s largest rotating angle of the bucket
ensure strong soil holding capacity.

Environmental-friendliness
The double pump confluence system with unloading function can automatically or manually switch over the individ-
ual pump based on the working condition and unload the high pressure by auxiliary pump, featuring high intelli-
gence and energy-saving.

The XCMG’s independently developed load-sensing system features smooth

digging and loading combination motions, low motion changeover impact, and
high efficiency and energy-saving.

During the digging and loading combination operations, the engine power to the
drive system can be easily cut off so that all power is supplied to the hydraulic
system to improve the digging and loading efficiency.

The machine automatically switches to two-wheel drive mode while traveling in

gear IV to eliminate the parasitic power loss.
XC870K/XC870HK
High Strength and High efficiency for
Extensive Adaptability Operation Safety and Control Comfort
Digging End Loading End The 360° panoramic view luxury cab with air conditioning system features large space, good sound and
heat insulation, and good shock absorption. With openable side windows and rear window, the cab
realizes broader visual field and comfortable operations.
The high strength structural design features The design optimized and industry leading
high operation efficiency, with the breakout 8-link working device features good levelness
force up to 63kN. of bucket and rapid operations.
The suspension seats equipped are multi-angle adjustable. The joysticks and the instrument panel are
arranged in accordance with ergonomic principles to realize comfortable operations.

The digging end can be equipped with the The ultra-high discharge height (2770mm)
attachments, including breaking hammer, and ultra-high breakout force (66kN) lead the
twist drill, vibrating tamper, hydraulic shear, like products. The radio/audio player, storages, cup holders, and cigarette lighter are equipped to sufficiently embody
and planer. the humanized design philosophy.

The gearshift lever is equipped with power cutoff switch to ensure simple switchover between high and
low gears.

The loading end can be equipped The FOPS&ROPS cab and the fire extinguisher and safety
with four-in-one bucket, manhole hammer equipped guarantee the personal safety of the operator.
cover planer, snow shovel, and
forks.

The operating status alarms equipped realize real-time monitor-

ing and guarantees operation safety.

ＸＣ８７０Ｋ　ａｄｏｐｔｓ　ｍｉｄｄｌｅ　ｗｉｎｇ－ｓｈａｐｅｄ　ｏｕｔｒｉｇｇｅｒｓ，　ｆｅａｔｕｒｉｎｇ　ｂｅａｕｔｉｆｕｌ　ａｐｐｅａｒａｎｃｅ，　
ｈｉｇｈ　ｌｏａｄ－ｃａｒｒｙｉｎｇ　ｃａｐａｃｉｔｙ，　ａｎｄ　ｕｌｔｒａ－ｈｉｇｈ　ｓｔａｂｉｌｉｔｙ．　

ＸＣ８７０ＨＫ　　ａｄｏｐｔｓ　ｌａｔｅｒａｌ　Ｈ－ｓｈａｐｅｄ　ｏｕｔｒｉｇｇｅｒｓ　ｓｏ　ｔｈａｔ，　ｗｈｉｌｅ　ｇｕａｒａｎｔｅｅｉｎｇ　ｔｈｅ　
The maintenance-free wet-type brake axle features one-sided braking function and low turning radius.
ｏｐｅｒａｔｉｏｎ　ｓｔａｂｉｌｉｔｙ，　ｔｈｅ　ｄｉｇｇｉｎｇ　ｄｅｖｉｃｅ　ｆｅａｔｕｒｅｓ　ｌａｔｅｒａｌ　ｍｏｖｅｍｅｎｔ　ｆｕｎｃｔｉｏｎ　ａｎｄ　ｍｏｒｅ　
ｅｘｔｅｎｓｉｖｅ　ｄｉｇｇｉｎｇ　ｓｃｏｐｅ．
XC870K/XC870HK
High-End Configuration for High Outline Dimensions
Firmness and Reliability XC870HK XC870K

The world’s renowned brand engine equipped features strong power

and reliable quality.

The CARRARO special transmission and drive axle for backhoe loader
and the high speed intelligent axle disengagement mechanism drive
technology are equipped to realize stable and reliable drive.

The first-class quality hydraulic units equipped ensure the working

safety and reliability.

The electronic control combination joysticks from world’s renowned

brand feature high reliability and simple operations.

The frame and the working device are optimized through finite element MAIN SPECIFICATIONS
analysis to realize reasonable stress distribution and firm structure.
Items Model Unit
XC870K XC870HK
Chassis type integrated integrated
Drive style 4 drive/2 drive 4 drive/2 drive
Digging working device middle side
Outline dimensions（L×W×H） 7440×2350×3450 6075×2350×3520 mm
Total weight 7600 8200 kg

Convenient Maintenances Max. travel speed

Wheelbase
≥40
2180
≥40
2180
km/h
mm
Power 82(Cummins) 74(Cummins) 74.9(Deutz dalian) 70(weichai ) 82(Cummins) 74(Cummins) 74.9(Deutz dalian) 70(weichai ) kW
Engine
Supplier tier 3 tier 2 tier 3 tier 2 tier 3 tier 2 tier 3 tier 2
The XCMG’s pioneering split engine hoods can open forward for a
Bucket capacity 1.0 1.0 m³
large angle to ease the disassembly and installation of two engine Rated load 2500 2500 kg
hoods and help the maintenances. Loading
Max. breakout 66 66 kN
Max. discharge height 2770 2770 mm
device
Max. discharge distance 755 755 mm
System pressure 24 24 Mpa
Bucket capacity 0.3 0.25 m³
The central pressure measurement port is configured to ease the daily Max. digging radius 5460 5420 mm
Digging
inspection. device
Max. digging depth 4425 4320 mm
Max. digging force 63 63 kN
System pressure 24 24 Mpa
The lubricating points for various hinge joints are concentrated to realize Structure and specification are subject to change without notice.In case there is any difference between
easy and fast maintenances. the description of the machine and the substantial machine,the substantial machine should govern.