Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    Contact Ratio or Length of The Arc of Contact P

    Uploaded by

    Shailesh Patel
    1) This document discusses key concepts in gear kinematics including module, pitch circle diameter, circular pitch, pitch circle radius, radius of addendum circles, length of the path of approach, length of the path of recess, length of the path of contact, length of the arc of contact, contact ratio, minimum number of teeth requirements, maximum velocity of sliding, and pitch line speed. 2) Important gear properties like gear ratio, module, circular pitch, and contact ratio are defined in terms of parameters like pitch circle diameter, number of teeth, and path lengths. 3) Formulas are provided for calculating properties of pinion and gear teeth including pitch circle radius, radius of addendum circles, lengths

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Contact Ratio or Length of The Arc of Contact P

    Uploaded by

    Shailesh Patel
    48 views1 page
    1) This document discusses key concepts in gear kinematics including module, pitch circle diameter, circular pitch, pitch circle radius, radius of addendum circles, length of the path of approach, length of the path of recess, length of the path of contact, length of the arc of contact, contact ratio, minimum number of teeth requirements, maximum velocity of sliding, and pitch line speed. 2) Important gear properties like gear ratio, module, circular pitch, and contact ratio are defined in terms of parameters like pitch circle diameter, number of teeth, and path lengths. 3) Formulas are provided for calculating properties of pinion and gear teeth including pitch circle radius, radius of addendum circles, lengths

    Original Description:

    formula

    Original Title

    Presentation1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) This document discusses key concepts in gear kinematics including module, pitch circle diameter, circular pitch, pitch circle radius, radius of addendum circles, length of the path of approach, length of the path of recess, length of the path of contact, length of the arc of contact, contact ratio, minimum number of teeth requirements, maximum velocity of sliding, and pitch line speed. 2) Important gear properties like gear ratio, module, circular pitch, and contact ratio are defined in terms of parameters like pitch circle diameter, number of teeth, and path lengths. 3) Formulas are provided for calculating properties of pinion and gear teeth including pitch circle radius, radius of addendum circles, lengths

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views1 page

    Contact Ratio or Length of The Arc of Contact P

    Uploaded by

    Shailesh Patel
    1) This document discusses key concepts in gear kinematics including module, pitch circle diameter, circular pitch, pitch circle radius, radius of addendum circles, length of the path of approach, length of the path of recess, length of the path of contact, length of the arc of contact, contact ratio, minimum number of teeth requirements, maximum velocity of sliding, and pitch line speed. 2) Important gear properties like gear ratio, module, circular pitch, and contact ratio are defined in terms of parameters like pitch circle diameter, number of teeth, and path lengths. 3) Formulas are provided for calculating properties of pinion and gear teeth including pitch circle radius, radius of addendum circles, lengths

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Chapter- Gear Kinematics and Theory of Machines (KTOM) (3131906)

    pitch circle diameter 𝐝 𝐃 𝑻 ω1


    Module, m = = = gear ratio G = =
    number of teeth 𝐭 𝐓 𝒕 ω𝟐
    𝛑𝐃 𝛑𝐝
    Circular pitch , Pc= = = 𝛑m
    𝐓 𝐭
    pitch circle radius of pinion r = m.t / 2
    pitch circle radius of gear R = m.T / 2
    Radius of addendum circle of pinion rA = r + Addendum
    radius of addendum circle of gear RA = R + Addendum

    length of the path of approach

    length of the path of recess

    length of path of contact KL = KP + PL

    Length of path of contact 𝐊𝐋


    length of arc of contact = =
    cosφ cosφ
    Length of the arc of contact
    Contact ratio or number of pairs of teeth in contact =
    Pc

    Minimum number of teeth required on a pinion

    Minimum Number of Teeth on the Wheel

    Maximum velocity of sliding of teeth = (ω1 + ω2 ) KP


    𝟐𝝅𝑵𝟏 𝟐𝝅𝑵𝟐
    ω1= , ω2=
    𝟔𝟎 𝟔𝟎

    pitch line speed Vp = ω1.r = ω2.R

    You might also like