Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Designing A Wi-Fi Deployment Using Ekahau Site Survey Pro PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

Designing a Wi-Fi deployment using Ekahau Site Survey Pro

By Pranay Pancholi - Loughborough University 27/3/2015

1. Overview
This document focuses on using Ekahau Site Survey Pro’s planning feature
capabilities to assist in designing a Wi-Fi network. A desktop-based survey
can be used to simulate, model and carry out simulated RF performance
predictions of a Wi-Fi network. The Ekahau planning features enable you to
design your Wi-Fi network off-site at your computer desk, prior to installing
any hardware.

Ekahau Site Survey (ESS) allows you to create highly customizable Wi-Fi
network signal coverage and performance reports which includes details for
signal strength, signal-to-noise ration (SNR), data rates, AP count etc.

Once complete this can be verified by conducting a physical on-site


active/passive survey by using the survey feature In Ekahau. For further
information in conducting site surveys using Ekahau please visit:
https://community.ja.net/groups/wtas-wireless-technology-advisory-
service/tags/Ekahau-site-survey-application

2. Hardware
System requirements to run Ekahau Site Survey are as follows:

• 1.5GHz processor or above


• Supports Windows 7 and 8.
• 4GB RAM or above is recommended
• 1GB Hard drive space

OS X users can run ESS within a Windows Bootcamp environment or by


using applications such as VMware Fusion, Parallels and Virtual Box.

3. Using Ekahau Site Survey (Planning Mode)


To start the ESS application, the licensed NIC network adapter module must
be connected to the computer you wish to use the application on. Failing to do
so will prompt the Ekahau activation screen. The network adapter will be
checked for each time the application is started – without the network adapter
the application will fail to launch.
As soon as the network adapter is inserted the application will launch without
any activation prompts.

Once the application has launched you will already be in planning mode. The
first step is to import a floor plan.

Importing a floor plan


ESS accepts the following image formats to use as maps:
• BMP
• JPG
• JPEG
• WBMP
• PNG
• GIF
• SVG
• DWF
• DXF

To import a floor plan, click Map > Add Map, or click the + sign next to the
map dropdown tab.

The floor plan will then be imported into the application.

Scaling Floor Plans


Once the floor plan has been imported to Ekahau Site Survey, it is vital that
the map has been scaled, as the application will not know how large the
building is. Another reason is so ESS can produce correct visualisations and
RF simulations.

Once you have the measurements you can select the scale tool from the
selection tools. Scale tool icon is one that looks like a ruler.

On the map click and drag between two end points. A pop up will appear to
enter the dimensions. Enter the dimensions and hit enter to set scale.
Drawing the walls
Next step is to draw all the walls. To draw the walls you first need to select
the Wall tool and select the type of material from the drop down list.

Once the type is selected, carefully draw the walls by clicking where the wall
is on the floor plan. If walls have curves, a tip is to keep left clicking to make a
turn on the wall. If you want to stop you can simply right-click and start again
by left clicking on the mouse.

You can fine-tune the floor plans by drawing in doors, windows, furniture etc.,
by choosing the desired object from the drop down list.
Drawing the coverage area
Next stage is to draw the coverage area of where you want Wi-Fi coverage.
First select the coverage area button from the toolbar.

Draw around the walls on the floor plan until the desired area is fully covered,
by left clicking on the mouse. Once complete, right click to stop the drawing
and you will see a purple dashed border.
You can also create an exclusion point where no Wi-Fi is required by drawing
another coverage area inside the existing one. The exclusion will be marked
with a grey box along with a purple dashed border.

Capacity Requirements
Before any software predictions are made it is suggested that you enter the
buildings capacity requirements into ESS. This is to determine how many
estimated devices will be used within the building and that there are enough
access points to support the number of devices, so as to avoid performance
issues.

On the menu bar click on Project > Capacity Requirements and enter in
how many types of devices you believe will be used on the network.
Coverage Requirements
Coverage Requirements allows you to set what purpose you require from your
wireless network. Are the requirements just for email/web purposes or do you
require coverage for high density? The requirements can be set by clicking on
Project > Coverage Requirements.

The requirements window includes a set of templates from the requirement


drop down box, from which the criteria can then be finely tuned.
Auto-Planner
Once your capacity and coverage requirements have been defined, click the
Auto-Planner button or click on Project > Auto-Planner.

Define your coverage requirements and select the Capacity ‘Consider in plan’
tick box to consider the capacity requirements that were previously
configured.

Within the Access Points section you can select your access type brand and
model. In this case a Cisco AP2702I model had been selected. You can
enable advanced settings to configure transmit power and height of AP as
well as channel bandwidth (5GHz only).

At the bottom you have options to change channel assignments you wish to
use for your network. The channel selections will be dependent on your
country’s Wi-Fi standards.
Lastly once your requirements have been defined, click the Create Plan
button to start the auto plan sequence.
Once complete ESS will simulate and display a heatmap with access points
displayed on the floor plan.

You can tweak by moving the simulated access points by simply selecting and
dragging them to a new location on the map.

It is also possible to add an additional access point by selecting the


Simulated Access Point from the planning toolbar and selecting the model
from the drop down list and place onto the floor map by left clicking.

As an alternative, if you did not want to auto simulate you can use the above
technique of manually selecting an access point and placing onto the map.
4. Comparison of a simulated survey with an actual survey
It was decided to test the simulated survey and compare it to a real active
survey that had been completed previously. Comparisons showed that the
results of the predictive survey were very close to those of the active survey.
For even greater accuracy, it is important to know as much as possible of the
buildings’ fabrications before starting.

5. Summary
Although not as accurate as conducting a full active/passive wireless site
survey, the planning features in Ekahau Site Survey Pro application provide a
suitable and reasonably accurate method for creating desktop-based
predictive wireless surveys. The advantages and flexibility of predictive
surveys can be used when a building is inaccessible or when planning for a
new build/refurbishment. Comparisons between the simulated and an actual
survey showed that the simulations were quite accurate – obviously that is
dependent on how much information you’ve got available when doing the
simulations. Once the installation is complete, it is advised where possible to
carry out a full survey onsite to verify and make any adjustments if required.
For further information in conducting site surveys using ESS please visit:
https://community.ja.net/groups/wtas-wireless-technology-advisory-
service/tags/Ekahau-site-survey-application

6. Contact
Pranay Pancholi, IT Services, Loughborough University.
P.M.Pancholi@lboro.ac.uk

You might also like