Sunex Catalog 2018

PRODUCT CATALOG
2018
SUNEX TOOLS
Hard Work and Hometown Heritage
Since our small-town beginnings in 1977, Sunex
Tools has become a recognized leader in industrial
and automotive workplace tools and equipment. Our
heritage and drive to make the best quality tools is why
we’re the brand of choice for working professionals
everywhere. From heavy-duty industrial maintenance
to the neighborhood auto mechanic, our customers
trust us to provide tools that work as hard as they do,
tools that are guaranteed to perform.
SUNEX® TOOLS
Full-throttle for over 40 years
It all started in small-town America in 1977. Sunex Tools set out to make an impact in
the automotive repair industry, and our heritage of hard work and passionate people
made the perfect combination. By the 1980s, Sunex had become a trusted name to
automotive pros. With that success, we didn’t tear down the goal posts; we moved
them. In 1984, we launched our flagship line of impact sockets, and we made our mark.
Sunex became an industry leader, all by doing what we do best: asking questions,
creating solutions, and delivering quality tools for the working professional. Our growing
customer base was proof-positive that we were on the right track.
The start of the millennium opened

new doors. In 2005, Sunex brought
time-tested quality to the inter-
national market, and by 2011 we
blazed our trail into the industrial
arena. With the successful launch
of every Sunex tool category from
hand tools to shop presses, it was
clear that both industrial Pros and
regular Joes demand tools that are
guaranteed to perform.
The next four decades may drive us to places we never dreamed of in 1977. What we
do know is that we’re ready to take on any challenge that lies down the road. Times
may change, but our drive, our people, and our passion to build tools guaranteed to
perform will always stay the same. That’s our heritage and our promise.
SUNEXTOOLS.COM
TABLE OF CONTENTS
TABLE
IMPACT OF CONTENTS 7
SOCKETS
HAND TOOLS 101
IMPACT
TOOLSOCKETS
STORAGE 7 151
HAND TOOLS
LIFTING 101 161
TOOL
AIRSTORAGE
TOOLS 167 181
LIFTING
SHOP EQUIPMENT 177 211
AIR SHOP
TOOLSPRESSES 197 223
SHOP EQUIPMENT
IMPACT 225 229
SOCKET SPECS
SHOP PRESSES
INDEX 227 278
IMPACT SOCKET SPECS 243
INDEX 292
1/4" Drive ................................. Pg 9
3/8" Drive ................................. Pg 16
1/2" Drive ................................. Pg 41
3/4" Drive ................................. Pg 75
1” Drive .................................... Pg 86
# 5 Spline ................................. Pg 93
Specialty................................... Pg 94
Backed by a Lifetime Warranty,
Sunex Impact Sockets are
warrantied against defects in
materials and workmanship for the
life of the product. This warranty
does not apply to items that have
been misused, abused, altered in
any way, or worn out from use. Some
Adapters, Reducers, and Extra Thin
Wall Impact Sockets are sold with
out of box warranty.
IMPACT SOCKETS
Since 1984, we’ve led the market with our solution-based designs
and quality materials. All of our Impact Sockets (low-profile, standard,
deep, hex drivers, universal joint, specialty, and extensions/adapters)
are backed by an industry-leading warranty, so you can rest easy
knowing your sockets are guaranteed to perform.
IMPACT SOCKETS
HIGHEST QUALITY. HIGHEST STANDARDS.
RADIUSED CORNERS
Focuses impact on fastener's
flat surfaces, increasing torque
and reducing wear and rounding
to the fastener.
NO-SKIP SIZE SPECTRUM

Sunex Impact SSocket Sets
include every si
size in the
specification ran
range: Largest
to smallest, and everything
in between.
HEAVY-DUTY STORAGE
TORAGE
Stay organized with
th a heavy-
duty, blow molded storage
case, included withh most kits.
DURABLE CR-
CR-MO STEEL
manufactured with
Precision manuf
chrome-molybdenum steel
for high-impact applications.
AVAILABLE IN KITS
AND INDIVIDUALLY SPECIALTY SOCKETS
Maximize your tool budget Every job has its own
and get exactly what you need. challenges. We offer a wide
selection of specialty sockets
to handle anything the job calls for.
SUNEX TOOLS
1/4" DRIVE - IMPACT SOCKETS 9
1/4" DRIVE SAE & METRIC

MASTER IMPACT SOCKET SET
1874 SET OF 74
MODEL SIZE MODEL SIZE
806 3/16" 809D 9/32" (DEEP)
807 7/32" 810D 5/16" (DEEP)
808 1/4" 811D 11/32" (DEEP)
809 9/32" 812D 3/8" (DEEP)
810 5/16" 814D 7/16" (DEEP)
811 11/32" 816D 1/2" (DEEP)
812 3/8" 818D 9/16" (DEEP)
814 7/16" 808U 1/4" (UNIV)
816 1/2" 810U 5/16" (UNIV)
818 9/16" 812U 3/8" (UNIV)
806D 3/16" (DEEP) 814U 7/16" (UNIV)
807D 7/32" (DEEP) 816U 1/2" (UNIV)
808D 1/4" (DEEP) 818U 9/16" (UNIV)

804M 4mm 810MD 10mm (DEEP)
8045M 4.5mm 811MD 11mm (DEEP)
8055M 5.5mm 813MD 13mm (DEEP)
808M 8mm 805UM 5mm (UNIV)
809M 9mm 8055UM 5.5mm (UNIV)
8055MD 5.5mm (DEEP) 812UM 12mm (UNIV)
806MD 6mm (DEEP) 813UM 13mm (UNIV)
809MD 9mm (DEEP)
STAR IMPACT SOCKETS
1820S1 T10 1820S4 T25
1820S2 T15 1820S5 T27
1820S3 T20 1820S6 T30
Includes: 2" Extension (1802), 4" Extension (1804), 6" Extension (1806),
Universal Joint (1800), 3/8" Adapter (3301)
SUNEXTOOLS.COM
10 IMPACT SOCKETS - 1/4" DRIVE
1848 SET OF 48
806 3/16" 806D 3/16" (DEEP)
807 7/32" 807D 7/32" (DEEP)
808 1/4" 808D 1/4" (DEEP)
809 9/32" 809D 9/32" (DEEP)
810 5/16" 810D 5/16" (DEEP)
811 11/32" 811D 11/32" (DEEP)
812 3/8" 812D 3/8" (DEEP)
814 7/16" 814D 7/16" (DEEP)
816 1/2" 816D 1/2" (DEEP)
818 9/16" 818D 9/16" (DEEP)

8045M 4.5mm 8045MD 4.5mm (DEEP)
8055M 5.5mm 8055MD 5.5mm (DEEP)
1/4" DRIVE SAE

IMPACT SOCKET SET
1810 SET OF 10
806 3/16" 811 11/32"
807 7/32" 812 3/8"
808 1/4" 814 7/16"
809 9/32" 816 1/2"
810 5/16" 818 9/16"
SAE METRIC
SUNEX TOOLS
1/4" DRIVE SAE

DEEP IMPACT SOCKET SET
1811 SET OF 10
806D 3/16" 811D 11/32"
807D 7/32" 812D 3/8"
808D 1/4" 814D 7/16"
809D 9/32" 816D 1/2"
810D 5/16" 818D 9/16"
1/4" DRIVE METRIC

IMPACT SOCKET SET
1809 SET OF 9
8055M 5.5mm 810M 10mm
806M 6mm 811M 11mm
807M 7mm 812M 12mm
808M 8mm 813M 13mm
809M 9mm
1/4" DRIVE METRIC

1812 SET OF 9
8055MD 5.5mm 810MD 10mm
806MD 6mm 811MD 11mm
809MD 9mm
SUNEXTOOLS.COM
MASTER MAGNETIC SOCKET SET
• Sockets include a spring loaded magnet that retracts into the socket
for extended bolt applications
1818 SET OF 23
806MG 3/16" 811MG 11/32"
807MG 7/32" 812MG 3/8"
808MG 1/4" 814MG 7/16"
809MG 9/32" 816MG 1/2"
810MG 5/16"

805MMG 5mm 810MMG 10mm
8055MMG 5.5mm 811MMG 11mm
Includes: Universal Joint (1800), 2" Extension (1802)
1/4" DRIVE SAE

MAGNETIC IMPACT SOCKET SET
1820 SET OF 9
806MG 3/16" 811MG 11/32"
807MG 7/32" 812MG 3/8"
808MG 1/4" 814MG 7/16"
809MG 9/32" 816MG 1/2"
810MG 5/16" 818MG 9/16"
1/4" DRIVE SAE

DEEP MAGNET IMPACT SOCKET SET
1830 SET OF 10
806DMG 3/6" 811DMG 11/32"
807DMG 7/32" 812DMG 3/8"
808DMG 1/4" 814DMG 7/16"
809DMG 9/32" 816DMG 1/2"
810DMG 5/16" 818DMG 9/16" SAE METRIC
SUNEX TOOLS
1/4" DRIVE METRIC

1/4" DRIVE METRIC DEEP MAGNET IMPACT SOCKET SET
MAGNETIC IMPACT SOCKET SET • Sockets include a spring loaded magnet that retracts into the socket
1831 SET OF 14
1822 SET OF 12
MODEL SIZE MODEL SIZE 804MDMG 4mm 809MDMG 9mm
805MMG 5mm 810MMG 10mm 8045MDMG 4.5mm 810MDMG 10mm
8055MMG 5.5mm 811MMG 11mm 805MDMG 5mm 811MDMG 11mm
806MMG 6mm 812MMG 12mm 8055MDMG 5.5mm 812MDMG 12mm
807MMG 7mm 813MMG 13mm 806MDMG 6mm 813MDMG 13mm
1/4" DRIVE METRIC

UNIVERSAL IMPACT SOCKET SET
1814 SET OF 12
1/4" DRIVE SAE
UNIVERSAL IMPACT SOCKET SET MODEL SIZE MODEL SIZE
805UM 5mm 810UM 10mm
1813 SET OF 6 8055UM 5.5mm 811UM 11mm
MODEL SIZE MODEL SIZE 806UM 6mm 812UM 12mm
808U 1/4" 814U 7/16" 807UM 7mm 813UM 13mm
810U 5/16" 816U 1/2" 808UM 8mm 814UM 14mm
812U 3/8" 818U 9/16" 809UM 9mm 815UM 15mm
SUNEXTOOLS.COM
1/4" DRIVE 12 POINT METRIC
MAGNETIC UNIVERSAL
IMPACT SOCKET SET
1825 SET OF 11
805ZUMMG 5mm 811ZUMMG 11mm
810ZUMMG 10mm
1/4" DRIVE 8/10mm

SEMI-DEEP FLIP SOCKET
LEXUS, MERCEDES BENZ,
INFINITY, CHEVY & BUICK
• For removing and installing under belly pans on foreign
and domestic vehicles
• For work on 10mm Lexus fasteners
• For work on 8mm fasteners on Infinity and Mercedes vehicles
• For work on Splash shield fasteners of Chevrolet Cruze and Buick Verano
80810
1/4" DRIVE INDIVIDUAL STAR SOCKETS

1820S1 T10 1820S4 T25
1820S2 T15 1820S5 T27
1820S3 T20 1820S6 T30
1/4" DRIVE INDIVIDUAL

UNIVERSAL JOINT
MODEL SIZE
1800 Universal Joint
SAE METRIC
SUNEX TOOLS
1/4" DRIVE INDIVIDUALS - IMPACT SOCKETS 15

SAE SOCKETS
SIZE STANDARD DEEP UNIVERSAL MAGNETIC DEEP
MAGNETIC
Standard Deep
SAE MODEL MODEL MODEL MODEL MODEL
3/16" 806 806D 806U 806MG 806DMG
7/32" 807 807D 807U 807MG 807DMG
1/4" 808 808D 808U 808MG 808DMG
Universal Magnetic 9/32" 809 809D 809U 809MG 809DMG
5/16" 810 810D 810U 810MG 810DMG
11/32" 811 811D 811U 811MG 811DMG
3/8" 812 812D 812U 812MG 812DMG
7/16" 814 814D 814U 814MG 814DMG
Deep Magnetic
1/2" 816 816D 816U 816MG 816DMG
9/16" 818 818D 818U 818MG 818DMG

METRIC SOCKETS
SIZE STANDARD DEEP UNIVERSAL MAGNETIC DEEP 12 PT. MAG
Standard Deep MAGNETIC UNIVERSAL
METRIC MODEL MODEL MODEL MODEL MODEL MODEL

4mm 804M 804MD 804UM 804MMG 804MDMG
4.5mm 8045M 8045MD 8045UM 8045MMG 8045MDMG
Universal Magnetic 5mm 805M 805MD 805UM 805MMG 805MDMG 805ZUMMG
5.5mm 8055M 8055MD 8055UM 8055MMG 8055MDMG
6mm 806M 806MD 806UM 806MMG 806MDMG 806ZUMMG
Deep Magnetic
12 pt. Magnetic Universal 13mm 813M 813MD 813UM 813MMG 813MDMG 813ZUMMG

EXTENSIONS
MODEL SIZE
1802 2" Extension
1804 4" Extension
1806 6" Extension
SUNEXTOOLS.COM
3/8" DRIVE SAE & METRIC MASTER
IMPACT SOCKET SET
3580 SET OF 80

310 5/16" 318D 9/16" (DEEP)
312 3/8" 320D 5/8" (DEEP)
314 7/16" 322D 11/16" (UNIV)
316 1/2" 324D 3/4" (UNIV)
318 9/16" 312U 3/8" (UNIV)
320 5/8" 314U 7/16" (UNIV)
322 11/16" 316U 1/2" (UNIV)
324 3/4" 318U 9/16" (UNIV)
310D 5/16" (DEEP) 320U 5/8" (UNIV)
312D 3/8" (DEEP) 322U 11/16" (UNIV)
314D 7/16" (DEEP) 324U 3/4" (UNIV)
316D 1/2" (DEEP)

STAR AND INVERTED STAR IMPACT SOCKETS
3670SE1 E5 3670S1 T20
3670SE2 E6 3670S2 T25
3670SE3 E7 3670S3 T27
3670SE4 E8 3670S4 T30
3670SE5 E10 3670S5 T40
3670SE6 E11 3670S6 T45
3670SE7 E12 3670S7 T47
3670SE8 E14 3670S8 T50
3670SE9 E16 3670S9 T55
Includes: 1/2"(F) x 3/8"(M) Adapter (2301), 3" Extension (3503)

SAE METRIC
SUNEX TOOLS
3/8" DRIVE SAE & METRIC STANDARD

& DEEP LENGTH MASTER IMPACT 3/8" DRIVE SAE & METRIC MASTER
SOCKET SET DEEP IMPACT SOCKET SET
3342 SET OF 42 3360DD SET OF 28
MODEL SIZE MODEL SIZE MODEL SIZE MODEL SIZE

310 5/16" 310D 5/16" (DEEP) 310D 5/16" 322D 11/16"
312 3/8" 312D 3/8" (DEEP) 312D 3/8" 324D 3/4"
314 7/16" 314D 7/16" (DEEP) 314D 7/16" 326D 13/16"
316 1/2" 316D 1/2" (DEEP) 316D 1/2" 328D 7/8"
318 9/16" 318D 9/16" (DEEP) 318D 9/16" 330D 15/16"
320 5/8" 320D 5/8" (DEEP) 320D 5/8" 332D 1"
322 11/16" 322D 11/16" (DEEP)
324 3/4" 324D 3/4" (DEEP)
MODEL SIZE MODEL SIZE 309MD 9mm 316MD 16mm
308M 8mm 308MD 8mm (DEEP) 310MD 10mm 317MD 17mm
Includes: 1/2"(F) x 3/8"(M) Adapter (2301), 3" Extension (3503)
Includes: Universal Joint (3301), 3" Extension (3503)
SUNEXTOOLS.COM
3/8" DRIVE SAE MASTER
IMPACT SOCKET SET
3325 SET OF 25

310 5/16” 310D 5/16” (DEEP)
312 3/8” 312D 3/8” (DEEP)
314 7/16” 314D 7/16” (DEEP)
316 1/2” 316D 1/2” (DEEP)
318 9/16” 318D 9/16” (DEEP)
320 5/8” 320D 5/8” (DEEP)
322 11/16” 322D 11/16” (DEEP)
324 3/4” 324D 3/4” (DEEP)
326 13/16” 326D 13/16” (DEEP)
328 7/8” 328D 7/8” (DEEP)
330 15/16” 330D 15/16” (DEEP)
332 1” 332D 1” (DEEP)
Includes: Universal Joint (3301)
3/8" DRIVE 12 POINT SAE

3326 SET OF 25

310Z 5/16" 36801 5/16" (DEEP)
312Z 3/8" 36802 3/8" (DEEP)
314Z 7/16" 36803 7/16" (DEEP)
316Z 1/2" 36804 1/2" (DEEP)
318Z 9/16" 36805 9/16" (DEEP)
320Z 5/8" 36806 5/8" (DEEP)
322Z 11/16" 36807 11/16" (DEEP)
324Z 3/4" 36808 3/4" (DEEP)
326Z 13/16" 36809 13/16" (DEEP)
328Z 7/8" 368010 7/8" (DEEP)
330Z 15/16" 368011 15/16" (DEEP)
332Z 1" 368012 1" (DEEP)
Includes: 3/8" Dr. Universal Joint (3301)
SAE METRIC
SUNEX TOOLS
3/8"
/8" DRIVE METRIC
IMPACT SOCKET SET
3351 SET OF 51
3/8" DRIVE METRIC MASTER
IMPACT SOCKET SET
3329 SET OF 29
308M 8mm 316MD 16mm (DEEP) MODEL SIZE MODEL SIZE

309M 9mm 317MD 17mm (DEEP) 308M 8mm 308MD 8mm (DEEP)
315M 15mm 307UM 7mm (UNIV) 314M 14mm 314MD 14mm (DEEP)
Includes: Universal Joint (3301), 3" Impact Extension Bar (3303),

1/4" Bit Holder Socket (3306)
SUNEXTOOLS.COM
3330 SET OF 29

308MZ 8mm 368208 8mm (DEEP)
309MZ 9mm 368209 9mm (DEEP)
310MZ 10mm 368210 10mm (DEEP)
311MZ 11mm 368211 11mm (DEEP)
312MZ 12mm 368212 12mm (DEEP)
313MZ 13mm 368213 13mm (DEEP)
314MZ 14mm 368214 14mm (DEEP)
315MZ 15mm 368215 15mm (DEEP)
316MZ 16mm 368216 16mm (DEEP)
317MZ 17mm 368217 17mm (DEEP)
318MZ 18mm 368218 18mm (DEEP)
319MZ 19mm 368219 19mm (DEEP)
321ZM 21mm 321ZMD 21mm (DEEP)
322ZM 22mm 322ZMD 22mm (DEEP)
3/8" DRIVE SAE STANDARD

IMPACT SOCKET SET
3360 SET OF 12

310 5/16" 322 11/16"
312 3/8" 324 3/4"
314 7/16" 326 13/16"
316 1/2" 328 7/8"
318 9/16" 330 15/16"
320 5/8" 332 1"
3/8" DRIVE SAE MID-DEPTH

IMPACT SOCKET SET
3327 SET OF 13

310RD 5/16" 322RD 11/16"
312RD 3/8" 324RD 3/4"
314RD 7/16" 326RD 13/16"
316RD 1/2" 328RD 7/8"
318RD 9/16" 330RD 15/16"
320RD 5/8" 332RD 1"
SAE METRIC
SUNEX TOOLS
3/8" DRIVE 12 POINT SAE DEEP

IMPACT SOCKET SET
3680 SET OF 12

36801 5/16" 36807 11/16"
36802 3/8" 36808 3/4"
36803 7/16" 36809 13/16"
36804 1/2" 368010 7/8"
36805 9/16" 368011 15/16"
36806 5/8" 368012 1"
3/8" DRIVE METRIC

STANDARD IMPACT SOCKET SET
3358 SET OF 13

307M 7mm 314M 14mm
308M 8mm 315M 15mm
309M 9mm 316M 16mm
310M 10mm 317M 17mm
311M 11mm 318M 18mm
312M 12mm 319M 19mm
313M 13mm
3/8" DRIVE METRIC MID-DEPTH

IMPACT SOCKET SET
3328 SET OF 14

308MRD 8mm 315MRD 15mm
SUNEXTOOLS.COM
IMPACT SOCKET SET
3674 SET OF 12

310Z 5/16" 322Z 11/16"
312Z 3/8" 324Z 3/4"
314Z 7/16" 326Z 13/16"
316Z 1/2" 328Z 7/8"
318Z 9/16" 330Z 15/16"
320Z 5/8" 332Z 1"
3/8" DRIVE 12 POINT

SAE SEMI-DEEP IMPACT SOCKET SET
3337 SET OF 12

310ZRD 5/16" 322ZRD 11/16"
312ZRD 3/8" 324ZRD 3/4"
314ZRD 7/16" 326ZRD 13/16"
316ZRD 1/2" 328ZRD 7/8"
318ZRD 9/16" 330ZRD 15/16"
320ZRD 5/8" 332ZRD 1"
3/8" DRIVE SAE DEEP

IMPACT SOCKET SET
3361 SET OF 12

310D 5/16" 322D 11/16"
312D 3/8" 324D 3/4"
314D 7/16" 326D 13/16"
316D 1/2" 328D 7/8"
318D 9/16" 330D 15/16"
320D 5/8" 332D 1"
SAE METRIC
SUNEX TOOLS

IMPACT SOCKET SET
3675 SET OF 13

307MZ 7mm 314MZ 14mm
310MZ 10mm 317MZ 17mm
311MZ 11mm 318MZ 18mm
312MZ 12mm 319MZ 19mm
313MZ 13mm
3/8" DRIVE 12 POINT

METRIC SEMI-DEEP IMPACT SOCKET SET
3338 SET OF 13

307MZRD 7mm 314MZRD 14mm
313MZRD 13mm
3/8" DRIVE METRIC

3359 SET OF 13

310MD 10mm 317MD 17mm
311MD 11mm 318MD 18mm
312MD 12mm 319MD 19mm
313MD 13mm
SUNEXTOOLS.COM
3/8" DRIVE 12 POINT METRIC DEEP
IMPACT SOCKET SET
3682 SET OF 13

368207 7mm 368214 14mm
368208 8mm 368215 15mm
368209 9mm 368216 16mm
368210 10mm 368217 17mm
368211 11mm 368218 18mm
368212 12mm 368219 19mm
368213 13mm
3/8" DRIVE SAE

IMPACT SOCKET SET
3650 SET OF 8

310 5/16" 318 9/16"
312 3/8" 320 5/8"
314 7/16" 322 11/16"
316 1/2" 324 3/4"
3/8" DRIVE SAE DEEP

IMPACT SOCKET SET
3652 Set of 8

310D 5/16" 318D 9/16"
312D 3/8" 320D 5/8"
314D 7/16" 322D 11/16"
316D 1/2" 324D 3/4"
SAE METRIC
SUNEX TOOLS
3/8" DRIVE METRIC

IMPACT SOCKET SET
3651 SET OF 8

309M 9mm 314M 14mm
310M 10mm 315M 15mm
311M 11mm 17M 17mm
313M 13mm 319M 19mm
3/8" DRIVE METRIC DEEP

IMPACT SOCKET SET
3653 SET OF 8

310MD 10mm 315MD 15mm
311MD 11mm 317MD 17mm
313MD 13mm 319MD 19mm
3/8" DRIVE METRIC LOW PROFILE 3/8" DRIVE SAE LOW PROFILE
IMPACT SOCKET SET WITH HEX SHANK IMPACT SOCKET SET WITH HEX SHANK
• Hex shank drive • Hex shank drive
• Low profile design for limited clearance application • Low profile design for limited clearance application
3362 SET OF 14 3363 SET OF 10

336201 6mm 336208 13mm 336301 1/4" 336306 1/2"
336202 7mm 336209 14mm 336302 9/32" 336307 9/16"
336203 8mm 336210 15mm 336303 5/16" 336308 5/8"
336204 9mm 336211 16mm 336304 3/8" 336309 11/16"
336205 10mm 336212 17mm 336305 7/16" 336310 3/4"
336206 11mm 336213 18mm
336207 12mm 336214 19mm
SUNEXTOOLS.COM
3/8" DRIVE SAE & METRIC LOW PROFILE
IMPACT SOCKET SET WITH RATCHET
3325SR SET OF 25

336301 1/4" 336306 1/2"
336302 9/32" 336307 9/16"
336303 5/16" 336308 5/8"
336304 3/8" 336309 11/16"
336305 7/16" 336310 3/4"

336201 6mm 336208 13mm
336202 7mm 336209 14mm
336203 8mm 336210 15mm
336204 9mm 336211 16mm
336205 10mm 336212 17mm
336206 11mm 336213 18mm
336207 12mm 336214 19mm
Includes: 3/8" Drive 80 Tooth Low Profile Ratchet (30080)
3/8" DRIVE METRIC LOW PROFILE

3/8" DRIVE SAE LOW PROFILE IMPACT SOCKET SET WITH RATCHET
IMPACT SOCKET SET WITH RATCHET 3315SR Set of 15
3311SR SET OF 11 MODEL SIZE MODEL SIZE

336201 6mm 336208 13mm
336202 7mm 336209 14mm
336301 1/4" 336306 1/2"
336203 8mm 336210 15mm
336302 9/32" 336307 9/16"
336204 9mm 336211 16mm
336303 5/16" 336308 5/8"
336205 10mm 336212 17mm
336304 3/8" 336309 11/16"
336206 11mm 336213 18mm
336305 7/16" 336310 3/4"
336207 12mm 336214 19mm
Includes: 3/8" Drive 80 Tooth Low Profile Ratchet (30080) Includes: 3/8" Drive 80 Tooth Low Profile Ratchet (30080)
MORE CHROME OPTIONS ON PAGES 103 - 125 SAE METRIC
SUNEX TOOLS
3/8" DRIVE EXT. / UNIV. - IMPACT SOCKETS 27
3/8" DRIVE IMPACT EXTENSION SET

3500
3503 3" 3510 10"
3505 5" 3515 15"
3/8" DRIVE LOCKING IMPACT

EXTENSION SET
• Features a positive locking ball detent and sliding collar for
quick release of sockets and accessories
3501
3503 3" 3512 12"
3506 6"
3/8" DRIVE IMPACT WOBBLE

EXTENSION SET
• Steel ball retainer on male end
• Wobble drive provides 15˚ offset in all directions
3504
3503W 3" 3510W 10"
3505W 5" 3515W 15"
3/8" DRIVE SAE UNIVERSAL

IMPACT SOCKET SET
3654 SET OF 7

312U 3/8" 320U 5/8"
314U 7/16" 322U 11/16"
316U 1/2" 324U 3/4"
318U 9/16"
SUNEXTOOLS.COM
28 IMPACT SOCKETS - 3/8" DRIVE UNIVERSALS
3/8" DRIVE 12 POINT SAE UNIVERSAL
IMPACT SOCKET SET
3690 SET OF 12

310UZ 5/16" 322UZ 11/16"
312UZ 3/8" 324UZ 3/4"
314UZ 7/16" 326UZ 13/16"
316UZ 1/2" 328UZ 7/8"
318UZ 9/16" 330UZ 15/16"
320UZ 5/8" 332UZ 1"
3/8" DRIVE SAE UNIVERSAL DEEP

IMPACT SOCKET SET
3656 SET OF 7

312UD 3/8" 320UD 5/8"
314UD 7/16" 322UD 11/16"
316UD 1/2" 324UD 3/4"
318UD 9/16"
3/8" DRIVE 12 POINT SAE UNIVERSAL

3677 SET OF 12

310ZUD 5/16" 322ZUD 11/16"
312ZUD 3/8" 324ZUD 3/4"
314ZUD 7/16" 326ZUD 13/16"
316ZUD 1/2" 328ZUD 7/8"
318ZUD 9/16" 330ZUD 15/16"
320ZUD 5/8" 332ZUD 1"
SAE METRIC
SUNEX TOOLS
3/8" DRIVE UNIVERSALS - IMPACT SOCKETS 29
3/8" DRIVE METRIC UNIVERSAL

IMPACT SOCKET SET
3655 Set of 7

310UM 10mm 316UM 16mm
313UM 13mm 317UM 17mm
314UM 14mm 318UM 18mm
315UM 15mm

IMPACT SOCKET SET
3657 SET OF 10

310UM 10mm 315UM 15mm
311UM 11mm 316UM 16mm
312UM 12mm 317UM 17mm
313UM 13mm 318UM 18mm
314UM 14mm 319UM 19mm

3691 SET OF 13

307ZUM 7mm 314ZUM 14mm
313ZUM 13mm
3/8" DRIVE METRIC UNIVERSAL DEEP

IMPACT SOCKET SET
3660 SET OF 10

310MD 10mm 315UMD 15mm
311UMD 11mm 316UMD 16mm
SUNEXTOOLS.COM
30 IMPACT SOCKETS - 3/8" DRIVE / UNIVERSALS
3/8" DRIVE 12 POINT METRIC UNIVERSAL
3678 SET OF 13

307MZUD 7mm 314MZUD 14mm
313MZUD 13mm
3/8" DRIVE SAE UNIVERSAL HEX

IMPACT DRIVER SET
3658 SET OF 7

365802 3/16" 365810 3/8"
365804 7/32" 365812 7/16"
365806 1/4" 365814 1/2"
365808 5/16"
3/8" DRIVE METRIC UNIVERSAL HEX

IMPACT DRIVER SET
3659 SET OF 7

365904 4mm 365908 8mm
365905 5mm 365910 10mm
365906 6mm 365912 12mm
365907 7mm
SAE METRIC
SUNEX TOOLS
3/8" DRIVE HEX DRIVERS - IMPACT SOCKETS 31
3/8" DRIVE MASTER HEX BIT

IMPACT SOCKET SET
• Includes most common hex sizes used for automotive repairs
3569 SET OF 84
LONG IMPACT HEX DRIVERS
35471 3/16" 35484 4mm
35472 7/32" 35485 5mm
35473 1/4" 35486 6mm
35474 5/16" 35487 7mm
35475 3/8" 35488 8mm
35476 7/16" 354810 10mm
35477 1/2" 354812 12mm
IMPACT HEX DRIVERS

36460 1/4" 364606 6mm
364601 5/16" 364607 7mm
364602 3/8" 364608 8mm
364603 7/16" 364610 10mm
364604 1/2" 364612 12mm
364605 9/16" 364614 14mm
364609 5/8" 364617 17mm
364611 3/4" 364619 19mm
HEX IMPACT SOCKETS
36471 3/16" 36481 4mm
36472 7/32" 36482 5mm
36473 1/4" 36483 6mm
36474 5/16" 36484 7mm
36475 3/8" 36485 8mm
36476 7/16" 36486 9mm
36477 1/2" 36487 10mm
36478 9/16" 36488 12mm
36479 5/8" 36489 14mm
STUBBY TRIPLE SQUARE IMPACT SOCKETS
INTERNAL STAR IMPACT SOCKETS EXTERNAL STAR IMPACT SOCKETS
304XZN M4 310XZN M10
3670S1 T20 3670SE1 E5
3670S2 T25 3670SE2 E6
3670S3 T27 3670SE3 E7 STUBBY TAMPERPROOF INTERNAL STAR IMPACT SOCKETS
3670S4 T30 3670SE4 E8 MODEL SIZE MODEL SIZE
3670S5 T40 3670SE5 E10 310TH T10H 330TH T30H
3670S6 T45 3670SE6 E11 315TH T15H 340TH T40H
3670S7 T47 3670SE7 E12 320TH T20H 345TH T45H
3670S8 T50 3670SE8 E14 325TH T25H 347TH T47H
3670S9 T55 3670SE9 E16 327TH T27H 350TH T50H
SUNEXTOOLS.COM
32 IMPACT SOCKETS - 3/8" HEX DRIVERS
3/8" DRIVE SAE & METRIC HEX
IMPACT DRIVER SET
3649 SET OF 13

36471 3/16" 36475 3/8"
36472 7/32" 36476 7/16"
36473 1/4" 36477 1/2"
36474 5/16" & 8mm

36481 4mm 36484 7mm
36482 5mm 36487 10mm
36483 6mm 36488 12mm
3/8" DRIVE SAE & METRIC STUBBY

IMPACT HEX DRIVER SET
3646 SET OF 16

36460 1/4" 364604 1/2"
364601 5/16" 364605 9/16"
364602 3/8" 364609 5/8"
364603 7/16" 364611 3/4"

364606 6mm 364612 12mm
364607 7mm 364614 14mm
364608 8mm 364617 17mm
364610 10mm 364619 19mm
3/8" DRIVE SAE HEX

IMPACT DRIVER SET
3647 SET OF 7

36471 3/16" 36475 3/8"
36472 7/32" 36476 7/16"
36473 1/4" 36477 1/2"
36474 5/16"
SAE METRIC
SUNEX TOOLS
3/8" DRIVE HEX DRIVERS - IMPACT SOCKETS 33
3/8" DRIVE SAE STUBBY

3644 SET OF 8

365600 1/4" 364605 9/16"
364602 3/8" 364609 5/8"
364603 7/16" 364613 11/16"
364604 1/2" 364611 3/4"
3/8" DRIVE EXTENDED LENGTH SAE

3547 SET OF 7

35471 3/16" 35475 3/8"
35472 7/32" 35476 7/16"
35473 1/4" 35477 1/2"
35474 5/16"
3/8" DRIVE METRIC HEX

IMPACT DRIVER SET
3648 SET OF 7

36481 4mm 36485 8mm
36482 5mm 36487 10mm
36483 6mm 36488 12mm
36484 7mm
SUNEXTOOLS.COM
34 IMPACT SOCKETS - 3/8" DRIVE HEX / SPECIALTY
3/8" DRIVE METRIC STUBBY
3645 SET OF 8

365606 6mm 364612 12mm
364607 7mm 364614 14mm
364608 8mm 364617 17mm
364610 10mm 364619 19mm
3/8" DRIVE EXTENDED LENGTH METRIC

3548 SET OF 7

35484 4mm 35488 8mm
35485 5mm 354810 10mm
35485 6mm 354812 12mm
35487 7mm
3/8" DRIVE DEEP STUBBY

TRIPLE SQUARE IMPACT BIT SOCKET SET
• One piece design for maximum durability
3640 SET OF 8
SAE METRIC
SUNEX TOOLS
3/8" DRIVE SPECIALTY - IMPACT SOCKETS 35
3/8" DRIVE DEEP STUBBY

TAMPERPROOF IMPACT BIT SOCKET SET
3641 SET OF 11
310TH T10H 335TH T35H
315TH T15H 340TH T40H
320TH T20H 345TH T45H
325TH T25H 347TH T47H
327TH T27H 350TH T50H
330TH T30H
3/8" DRIVE STUBBY

STAR BIT IMPACT BIT SOCKET SET
3643 SET OF 10
310T T10 330T T30
315T T15 340T T40
320T T20 345T T45
325T T25 347T T47
327T T27 350T T50
3/8" DRIVE STAR IMPACT SOCKET SET

3670S SET OF 9
3670S1 T20 3670S6 T45
3670S2 T25 3670S7 T47
3670S3 T27 3670S8 T50
3670S4 T30 3670S9 T55
3670S5 T40
SUNEXTOOLS.COM
36 IMPACT SOCKETS - 3/8" DRIVE / SPECIALTY
3/8" DRIVE INVERTED STAR
IMPACT SOCKET SET
3670SE SET OF 9
3670SE1 E5 3670SE6 E11
3670SE2 E6 3670SE7 E12
3670SE3 E7 3670SE8 E14
3670SE4 E8 3670SE9 E16
3670SE5 E10
3/8" DRIVE OIL FILTER SOCKET SET

• Forged from Chrome-Vanadium alloy steel
3671
WARNING: Use of this socket with an impact tool can cause serious injury.
3/8" DRIVE INDIVIDUAL OIL & FUEL FILTER SOCKETS

• Forged from Chrome-Vanadium alloy steel for maximum strength
MODEL TYPE MODEL TYPE

24mm Oil Filter Socket: 35/36mm Oil Filter Socket:
Applicable for use on Buick with WT-V6 engines, Applicable for use on BWMW M52, M60, M62,
367124 367135
Rendezvous Ultra, Lacrosse CSX, Cadillac WT-V6 - CTS, M70, M73, MB, OM604, OM605, and OM606 engines;
STS, SRX, and Saturn L3000 also fits Audi and VW models
29mm Oil Filter Socket: 27mm Oil Filter Socket:

367129 Applicable for use on Dodge Cummins 367127 Applicable for use on Cadillac STS 3.2 liter V6
fuel filter housing 14700 and Mercedes Benz 1.8 liter 14 engines
32mm Oil Filter Socket: 38mm Oil Filter Socket:

367132 367138
Applicable for use on GM EcoTec and Saab engines Vauxhaul Vectra 2.0 liter diesel engines
SAE METRIC
SUNEX TOOLS
3/8" DRIVE PIPE PLUG SOCKET SET

3841 SET OF 8
MODEL SIZE TYPE
214FP 7/16" Female Pipe Plug Socket
214P 7/16" Male Pipe Plug Socket
SLEEVE ADAPTER SET

• Low profile design
• Magnetic retention device keep the adapter attached to the socket
• Sleeve adapters can be stacked if additional drive reduction is needed
• Designed for impact or hand tool use
2342
3302 1/4" x 3/8" 4307 1/2" x 3/4"
2306 3/8" x 1/2"
3/8" DRIVE EP24 INVERTED STAR

PLUS IMPACT SOCKET
• Used to loosen and tighten all 2017 Ford truck bed bolts
324FTB
3/8" DRIVE 17mm CONVEX EXTRA

THIN WALL WHEEL LUG SOCKET
• Designed for damage-free removal of ABS pressure switch
Removes and installs Bendix 10 ABS pressure switch on a 1990
or newer Dodge Monaco, Eagle Premier, and 1991 and newer
Chrysler, Plymouth, and Dodge minivans
10212
SUNEXTOOLS.COM
38 IMPACT SOCKETS - 3/8" DRIVE SPECIALTY
3/8" DRIVE SWITCH SOCKET CHEVROLET
• Oil pressure switch socket fits 1" and 1-1/16"
on GM and Chrysler vehicles
10007
3/8" DRIVE 5/8" EXTENDED

SPARKPLUG SOCKET
• Length 4.5"
• Designed for easy removal and installation of recessed, hard to
reach spark plugs that are often deep within a tube
10008
3/8" DRIVE FUEL FILTER BANJO

BOLT SOCKET
• Designed for use on most 1986 and later fuel injected Honda and
Acura vehicles, this socket is designed to easily remove and install
the uniquely designed banjo bolt used to attach the fuel line to the
fuel filter
10005
SAE METRIC
SUNEX TOOLS

SAE SOCKETS
SIZE STANDARD DEEP UNIVERSAL DEEP MAGNETIC 12 POINT 12 PT 12 PT. 12 PT.
UNIV. UNIV. DEEP UNIV./DEEP
SAE MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL
1/4" 308MG
5/16" 310 310D 310U 310UD 310MG 310Z 310UZ 36801 310ZUD
3/8" 312 312D 312U 312UD 312MG 312Z 312UZ 36802 312ZUD
7/16" 314 314D 314U 314UD 314MG 314Z 314UZ 36803 314ZUD
1/2" 316 316D 316U 316UD 316MG 316Z 316UZ 36804 316ZUD
9/16" 318 318D 318U 318UD 318MG 318Z 318UZ 36805 318ZUD
5/8" 320 320D 320U 320UD 320MG 320Z 320UZ 36806
11/16" 322 322D 322U 322UD 322MG 322Z 322UZ 36807
3/4" 324 324D 324U 324UD 324MG 324Z 324UZ 36808
13/16" 326 326D 326U 326UD 326Z 326UZ 36809
7/8" 328 328D 328U 328UD 328Z 328UZ 368010
15/16" 330 330D 330Z 330UZ 368011
1" 332 332D 332Z 332UZ 368012
Standard Deep Magnetic 12 Point
Universal Deep Universal 12 Point Universal 12 Point Deep
3/8" DRIVE INDIVIDUAL 3/8" DRIVE INDIVIDUAL

EXTERNAL STAR SOCKETS UNIVERSAL JOINT
MODEL SIZE MODEL SIZE MODEL SIZE

304SE E4 3670S35 E10 3301 Universal Joint
3670SE1 E5 3670SE6 E11
3670SE2 E6 3670SE7 E12
3670SE3 E7 3670SE8 E14
3670SE4 E8 3670SE9 E16
SUNEXTOOLS.COM
40 IMPACT SOCKETS - 3/8" DRIVE INDIVIDUALS
3/8" DRIVE INDIVIDUAL METRIC SOCKETS
SIZE STANDARD DEEP UNIVERSAL DEEP UNIV. MAGNETIC 12 POINT 12 PT. 12 PT. 12 PT.
UNIV. DEEP UNIV./DEEP
METRIC MODEL# MODEL# MODEL# MODEL# MODEL# MODEL# MODEL# MODEL# MODEL#
7mm 307M 307MD 307MMG 307MZ 307ZUM 368207 307MZUD
10mm 310M 310MD 310UM 310UMD 310MMG 310MZ 310ZUM 368210 310MZUD
11mm 311M 311MD 311UM 311UMD 311MMG 311MZ 311ZUM 368211
20mm 320M 320MD 320UM 320UMD
21mm 321M 321MD 321UM 321UMD 321ZMD
22mm 322M 322MD 322UM 322UMD 322ZMD
Standard Deep Magnetic 12 Point
Universal Deep Universal 12 Point Universal

INTERNAL STAR SOCKETS

3670S1 T20 3670S6 T45
3670S2 T25 3670S7 T47
3670S3 T27 3670S8 T50
3670S4 T30 3670S9 T55
3670S5 T40
SAE METRIC
SUNEX TOOLS
1/2" DRIVE SAE MASTER

IMPACT SOCKET SET
2568 SET OF 43

212 3/8" 212 3/8" (DEEP)
214 7/16" 214 7/16" (DEEP)
216 1/2" 216 1/2" (DEEP)
218 9/16" 218 9/16" (DEEP)
220 5/8" 220 5/8" (DEEP)
222 11/16" 222 11/16" (DEEP)
224 3/4" 224 3/4" (DEEP)
226 13/16" 226 13/16" (DEEP)
228 7/8" 228 7/8" (DEEP)
230 15/16" 230 15/16" (DEEP)
232 1" 232 1" (DEEP)
234 1-1/16" 234 1-1/16" (DEEP)
236 1-1/8" 236 1-1/8" (DEEP)
238 1-3/16" 238 1-3/16" (DEEP)
240 1-1/4" 240 1-1/4" (DEEP)
242 1-5/16" 242 1-5/16" (DEEP)
244 1-3/8" 244 1-3/8" (DEEP)
246 1-7/16" 246 1-7/16" (DEEP)
248 1-1/2" 248 1-1/2" (DEEP)
Includes: 4 Impact Extension Bars - 3" (2503), 5" (2505), 10" (2510),
15" (2515), Universal Joint (2300)
1/2" DRIVE SAE & METRIC EXTRA THIN

WALL DEEP IMPACT SOCKET SET
2611 SET OF 11

2624 3/4" 2632 1"
2626 13/16" 2634 1-1/16"
2628 7/8"

2617 17mm 2622 22mm
2619 19mm 2623 23mm
2621 21mm
Includes: 3" Extension (2503)
SUNEXTOOLS.COM
1/2" DRIVE SAE & METRIC MASTER 1/2" DRIVE METRIC MASTER
DOUBLE DEEP IMPACT SOCKET SET IMPACT SOCKET SET
5153DD SET OF 29 2569 SET OF 43

214D 7/16" 228D 7/8" 212M 9mm 212MD 9mm (DEEP)
216D 1/2" 230D 15/16" 210M 10mm 210MD 10mm (DEEP)
218D 9/16" 232D 1" 211M 11mm 211MD 11mm (DEEP)
220D 5/8" 234D 1-1/16" 212M 12mm 212MD 12mm (DEEP)
222D 11/16" 236D 1-1/8" 213M 13mm 213MD 13mm (DEEP)
224D 3/4" 240D 1-1/4" 214M 14mm 214MD 14mm (DEEP)
226D 13/16" 215M 15mm 215MD 15mm (DEEP)
210MD 10mm 217MD 17mm
211MD 11mm 218MD 18mm
212MD 12mm 219MD 19mm
213MD 13mm 221MD 21mm
214MD 14mm 222MD 22mm
215MD 15mm 226MD 26mm
216MD 16mm 227MD 27mm
DEEP FLIP SOCKETS
MODEL SIZE MODEL SIZE 226M 26mm 226MD 26mm (DEEP)
2701 3/4" x 13/16" 2704 19mm x 21mm 227M 27mm 227MD 27mm (DEEP)
Includes: 4 Impact Extension Bars - 3" (2503), 5" (2505), 10" (2510),
15" (2515), Universal Joint (2300)
SAE METRIC
SUNEX TOOLS
1/2" DRIVE SAE MASTER 1/2" DRIVE 12 POINT SAE MASTER

IMPACT SOCKET SET IMPACT SOCKET SET
2668 SET OF 39 2698 SET OF 39

212 3/8" 212D 3/8" (DEEP) 212Z 3/8" 26701 3/8" (DEEP)
214 7/16" 214D 7/16" (DEEP) 214Z 7/16" 26702 7/16" (DEEP)
216 1/2" 216D 1/2" (DEEP) 216Z 1/2" 26703 1/2" (DEEP)
218 9/16" 218D 9/16" (DEEP) 218Z 9/16" 26704 9/16" (DEEP)
220 5/8" 220D 5/8" (DEEP) 220Z 5/8" 26705 5/8" (DEEP)
222 11/16" 222D 11/16" (DEEP) 222Z 11/16" 26706 11/16" (DEEP)
224 3/4" 224D 3/4" (DEEP) 224Z 3/4" 26707 3/4" (DEEP)
226 13/16" 226D 13/16" (DEEP) 226Z 13/16" 26708 13/16" (DEEP)
228 7/8" 228D 7/8" (DEEP) 228Z 7/8" 26709 7/8" (DEEP)
230 15/16" 230D 15/16" (DEEP) 230Z 15/16" 267010 15/16" (DEEP)
232 1" 232D 1" (DEEP) 232Z 1" 267011 1" (DEEP)
234 1-1/16" 234D 1-1/16" (DEEP) 234Z 1-1/16" 267012 1-1/16" (DEEP)
236 1-1/8" 236D 1-1/8" (DEEP) 236Z 1-1/8" 267013 1-1/8" (DEEP)
238 1-3/16" 238D 1-3/16" (DEEP) 238Z 1-3/16" 267014 1-3/16" (DEEP)
240 1-1/4" 240D 1-1/4" (DEEP) 240Z 1-1/4" 267015 1-1/4" (DEEP)
242 1-5/16" 242D 1-5/16" (DEEP) 242Z 1-5/16" 242ZD 1-5/16" (DEEP)
244 1-3/8" 244D 1-3/8" (DEEP) 244Z 1-3/8" 244ZD 1-3/8" (DEEP)
246 1-7/16" 246D 1-7/16" (DEEP) 246Z 1-7/16" 246ZD 1-7/16" (DEEP)
248 1-1/2" 248D 1-1/2" (DEEP) 248Z 1-1/2" 248ZD 1-1/2" (DEEP)
Includes: Universal Joint (2300) Includes: Universal Joint (2300)
SUNEXTOOLS.COM
1/2" DRIVE METRIC MASTER 1/2" DRIVE 12 POINT METRIC MASTER

IMPACT SOCKET SET IMPACT SOCKET SET
2669 SET OF 39 2699 Set of 39

209M 9mm 209MD 9mm (DEEP) 209ZM 9mm 209ZMD 9mm (DEEP)
Includes: Universal Joint (2300) Includes: Universal Joint (2300)
SAE METRIC
SUNEX TOOLS
1/2" DRIVE SAE

IMPACT SOCKET SET
2640 SET OF 19

212 3/8" 232 1"
214 7/16" 234 1-1/16"
216 1/2" 236 1-1/8"
218 9/16" 238 1-3/16"
220 5/8" 240 1-1/4"
222 11/16" 242 1-5/16"
224 3/4" 244 1-3/8"
226 13/16" 246 1-7/16"
228 7/8" 248 1-1/2"
230 15/16"
1/2"
2" DRIVE SAE
DEEP IMPACT SOCKET SET 1/2" DRIVE 12 POINT
• Expanded size range includes deep impact sockets from 5/16 - 1-1/2" SAE IMPACT SOCKET SET
2824 SET OF 24 2819 SET OF 19

210 5/16" 230 15/16" 212Z 3/8" 232Z 1"
212 3/8" 232 1" 214Z 7/16" 234Z 1-1/16"
214 7/16" 234 1-1/16" 216Z 1/2" 236Z 1-1/8"
216 1/2" 236 1-1/8" 218Z 9/16" 238Z 1-3/16"
218 9/16" 238 1-3/16" 220Z 5/8" 240Z 1-1/4"
220 5/8" 240 1-1/4" 222Z 11/16" 242Z 1-5/16"
222 11/16" 242 1-5/16" 224Z 3/4" 244Z 1-3/8"
224 3/4" 244 1-3/8" 226Z 13/16" 246Z 1-7/16"
226 13/16" 246 1-7/16" 228Z 7/8" 248Z 1-1/2"
228 7/8" 248 1-1/2" 230Z 15/16"
Includes: 3 Impact Extension Bars: 3" (2503), 5" (2505), 10" (2510),
Universal Joint (2300)
SUNEXTOOLS.COM
1/2" DRIVE SAE DEEP
IMPACT SOCKET SET
2641 SET OF 19

212D 3/8" 232D 1"
214D 7/16" 234D 1-1/16"
216D 1/2" 236D 1-1/8"
218D 9/16" 238D 1-3/16"
220D 5/8" 240D 1-1/4"
222D 11/16" 242D 1-5/16"
224D 3/4" 244D 1-3/8"
226D 13/16" 246D 1-7/16"
228D 7/8" 248D 1-1/2"
230D 15/16"
1/2" DRIVE METRIC

C
1/2" DRIVE 12 POINT SAE 2646 SET OF 26
DEEP IMPACT SOCKET SET MODEL SIZE MODEL SIZE

210MD 10mm 223MD 23mm
2820 SET OF 19
211MD 11mm 224MD 24mm
MODEL SIZE MODEL SIZE 212MD 12mm 225MD 25mm
26701 3/8" 267011 1" 213MD 13mm 226MD 26mm
26702 7/16" 267012 1-1/16" 214MD 14mm 227MD 27mm
26703 1/2" 267013 1-1/8" 215MD 15mm 228MD 28mm
26704 9/16" 267014 1-3/16" 216MD 16mm 229MD 29mm
26705 5/8" 267015 1-1/4" 217MD 17mm 230MD 30mm
26706 11/16" 242ZD 1-5/16" 218MD 18mm 232MD 32mm
26707 3/4" 244ZD 1-3/8" 219MD 19mm 233MD 33mm
26708 13/16" 246ZD 1-7/16" 220MD 20mm 234MD 34mm
26709 7/8" 248ZD 1-1/2" 221MD 21mm 235MD 35mm
267010 15/16" 222MD 22mm 236MD 36mm
SAE METRIC
SUNEX TOOLS
1/2" DRIVE DEEP 12 POINT METRIC

IMPACT SOCKET SET
2827 SET OF 26

267210 10mm 267223 23mm
267211 11mm 267224 24mm
267212 12mm 225ZMD 25mm
267213 13mm 226ZMD 26mm
267214 14mm 227ZMD 27mm
267215 15mm 228ZMD 28mm
267216 16mm 229ZMD 29mm
267217 17mm 230ZMD 30mm
267218 18mm 232ZMD 32mm
267219 19mm 233ZMD 33mm
267220 20mm 234ZMD 34mm
267221 21mm 235ZMD 35mm
267222 22mm 236ZMD 36mm
1/2" DRIVE METRIC

IMPACT SOCKET SET
2645 SET OF 26

210M 10mm 223M 23mm
211M 11mm 224M 24mm
212M 12mm 225M 25mm
213M 13mm 226M 26mm
214M 14mm 227M 27mm
215M 15mm 228M 28mm
216M 16mm 229M 29mm
217M 17mm 230M 30mm
218M 18mm 232M 32mm
219M 19mm 233M 33mm
220M 20mm 234M 34mm
221M 21mm 235M 35mm
222M 22mm 236M 36mm
SUNEXTOOLS.COM
IMPACT SOCKET SET
2826 SET OF 26

210ZM 10mm 223ZM 23mm
211ZM 11mm 224ZM 24mm
212ZM 12mm 225ZM 25mm
213ZM 13mm 226ZM 26mm
214ZM 14mm 227ZM 27mm
215ZM 15mm 228ZM 28mm
216ZM 16mm 229ZM 29mm
217ZM 17mm 230ZM 30mm
218ZM 18mm 232ZM 32mm
219ZM 19mm 233ZM 33mm
220ZM 20mm 234ZM 34mm
221ZM 21mm 235ZM 35mm
222ZM 22mm 236ZM 36mm
1/2" DRIVE SAE

IMPACT SOCKET SET
2650 SET OF 13

214 7/16" 228 7/8"
216 1/2" 230 15/16"
218 9/16" 232 1"
220 5/8" 234 1-1/16"
222 11/16" 236 1-1/8"
224 3/4" 240 1-1/4"
226 13/16"

IMPACT SOCKET SET
2678 SET OF 14

214Z 7/16" 228Z 7/8"
216Z 1/2" 230Z 15/16"
218Z 9/16" 232Z 1"
220Z 5/8" 234Z 1-1/16"
222Z 11/16" 236Z 1-1/8"
224Z 3/4" 238Z 1-3/16"
226Z 13/16" 240Z 1-1/4" SAE METRIC
SUNEX TOOLS
1/2" DRIVE 8 POINT

SAE DEEP IMPACT SOCKET SET
2858 SET OF 13

212QD 3/8" 226QD 13/16"
214QD 7/16" 228QD 7/8"
216QD 1/2" 230QD 15/16"
218QD 9/16" 232QD 1"
220QD 5/8" 234QD 1-1/16"
222QD 11/16" 236QD 1-1/8"
224QD 3/4"
1/2" DRIVE SAE DEEP

IMPACT SOCKET SET
2651 SET OF 13

214D 7/16" 228D 7/8"
216D 1/2" 230D 15/16"
218D 9/16" 232D 1"
220D 5/8" 234D 1-1/16"
222D 11/16" 236D 1-1/8"
224D 3/4" 240D 1-1/4"
226D 13/16"

2670 SET OF 15

26701 3/8" 26709 7/8"
26702 7/16" 267010 15/16"
26703 1/2" 267011 1"
26704 9/16" 267012 1-1/16"
26705 5/8" 267013 1-1/8"
26706 11/16" 267014 1-3/16"
26707 3/4" 267015 1-1/4"
26708 13/16"
SUNEXTOOLS.COM
1/2" DRIVE SAE EXTRA LONG DEEP
IMPACT SOCKET SET
2845 SET OF 5

232XD 1" 240XD 1-1/4"
234XD 1-1/16" 242XD 1-5/16"
236XD 1-1/8"
1/2" DRIVE SAE EXTRA LONG DEEP

IMPACT SOCKET SET
2848 SET OF 8

216XD 1/2" 224XD 3/4"
218XD 9/16" 226XD 13/16"
220XD 5/8" 228XD 7/8"
222XD 11/16" 230XD 15/16"
1/2" DRIVE METRIC

IMPACT SOCKET SET
• Add on set for: set# 2652
2692 SET OF 12

223M 23mm 230M 30mm
224M 24mm 232M 32mm
225M 25mm 233M 33mm
226M 26mm 234M 34mm
227M 27mm 235M 35mm
228M 28mm 236M 36mm
SAE METRIC
SUNEX TOOLS

IMPACT SOCKET SET
2679 SET OF 13

210ZM 10mm 217ZM 17mm
211ZM 11mm 218ZM 18mm
212ZM 12mm 219ZM 19mm
213ZM 13mm 221ZM 21mm
214ZM 14mm 222ZM 22mm
215ZM 15mm 224ZM 24mm
216ZM 16mm
1/2" DRIVE METRIC EXTRA LONG DEEP

IMPACT SOCKET SET
2851 SET OF 12

213MXD 13mm 219MXD 19mm
1/2" DRIVE METRIC

IMPACT SOCKET SET
2652 SET OF 14

210M 10mm 217M 17mm
211M 11mm 218M 18mm
212M 12mm 219M 19mm
213M 13mm 221M 21mm
214M 14mm 222M 22mm
215M 15mm 226M 26mm
216M 16mm 227M 27mm
SUNEXTOOLS.COM

IMPACT SOCKET SET
2653 SET OF 14

210MD 10mm 217MD 17mm
211MD 11mm 218MD 18mm
212MD 12mm 219MD 19mm
213MD 13mm 221MD 21mm
214MD 14mm 222MD 22mm
215MD 15mm 226MD 26mm
216MD 16mm 227MD 27mm

2672 SET OF 15

267210 10mm 267218 18mm
267211 11mm 267219 19mm
267212 12mm 267220 20mm
267213 13mm 267221 21mm
267214 14mm 267222 22mm
267215 15mm 267223 23mm
267216 16mm 267224 24mm
267217 17mm
1/2" DRIVE METRIC EXTRA LONG DEEP

IMPACT SOCKET SET
2852 SET OF 9

230MXD 30mm
SAE METRIC
SUNEX TOOLS
1/2" DRIVE SAE LOW PROFILE

IMPACT SOCKET SET WITH HEX SHANK
• Hex shank drive
• Low profile design for limited clearance application
2674 SET OF 11

267401 3/8" 267407 3/4"
267402 7/16" 267408 13/16"
267403 1/2" 267409 7/8"
267404 9/16" 267410 15/16"
267405 5/8" 267411 1"
267406 11/16"
1/2" DRIVE METRIC LOW PROFILE

IMPACT SOCKET SET WITH HEX SHANK
• Hex shank drive
• Low profile design for limited clearance application
2673 SET OF 15

267301 10mm 267309 18mm
267302 11mm 267310 19mm
267303 12mm 267311 20mm
267304 13mm 267312 21mm
267305 14mm 267313 22mm
267306 15mm 267314 23mm
267307 16mm 267315 24mm
267308 17mm

IMPACT SOCKET SET
2644 SET OF 14

214U 7/16" 228U 7/8"
216U 1/2" 230U 15/16"
218U 9/16" 232U 1"
220U 5/8" 234U 1-1/16"
222U 11/16" 236U 1-1/8"
224U 3/4" 238U 1-3/16"
226U 13/16" 240U 1-1/4"
SUNEXTOOLS.COM
1/2" DRIVE 12 POINT
SAE UNIVERSAL IMPACT SOCKET SET
2856 SET OF 15

212UZ 3/8" 228UZ 7/8"
214UZ 7/16" 230UZ 15/16"
216UZ 1/2" 232UZ 1"
218UZ 9/16" 234UZ 1-1/16"
220UZ 5/8" 236UZ 1-1/8"
222UZ 11/16" 238UZ 1-3/16"
224UZ 3/4" 240UZ 1-1/4"
226UZ 13/16"

2659 SET OF 10

213UD 3/8" 222UD 11/16"
214UD 7/16" 224UD 3/4"
216UD 1/2" 226UD 13/16"
218UD 9/16" 228UD 7/8"
220UD 5/8" 230UD 15/16"

IMPACT SOCKET SET
2657 SET OF 9

214U 7/16" 224U 3/4"
216U 1/2" 226U 13/16"
218U 9/16" 228U 7/8"
220U 5/8" 230U 15/16"
222U 11/16"
SAE METRIC
SUNEX TOOLS

IMPACT SOCKET SET
2654 SET OF 7

216U 1/2" 224U 3/4"
218U 9/16" 226U 13/16"
220U 5/8" 228U 7/8"
222U 11/16"
1/2" DRIVE METRIC

2665 SET OF 13

212UM 12mm 219UM 19mm
213UM 13mm 220UM 20mm
214UM 14mm 221UM 21mm
215UM 15mm 222UM 22mm
216UM 16mm 223UM 23mm
217UM 17mm 224UM 24mm
218UM 18mm

IMPACT SOCKET SET
2655 SET OF 7

213UM 13mm 217UM 17mm
214UM 14mm 218UM 18mm
215UM 15mm 219UM 19mm
216UM 16mm
SUNEXTOOLS.COM
1/2" DRIVE 12 POINT METRIC UNIVERSAL

IMPACT SOCKET SET
2855 SET OF 15

217ZUM 17mm

2658 SET OF 10


UNIVERSAL DEEP IMPACT SOCKET SET
2662 SET OF 15

217MZUD 17mm
SAE METRIC
SUNEX TOOLS

HEX DRIVER IMPACT SOCKET SET
2748 SET OF 8

274806 1/4" 274814 1/2
274808 5/16" 274816 9/16"
274810 3/8" 274818 5/8"
274812 7/16" 274820 3/4

2749 SET OF 8

274906 6mm 274912 12mm
274907 7mm 274914 14mm
274908 8mm 274917 17mm
274910 10mm 274919 19mm
1/2" DRIVE 12 POINT SAE DRIVELINE

LIMITED CLEARANCE SOCKET SET
• Great for most limited access fasteners
• Includes driveline sockets for Chevrolet,
Chrysler, Dodge, Ford, GMC and Jeep models
• Remove and install driveline bolts, torque
converters, cylinder heads, and 4x4 transmission casings
2696 SET OF 7
SIZE SIZE
5/16" 3/8"
7/16" 1/2"
9/16" 11/16"
3/4"
SUNEXTOOLS.COM
58 IMPACT SOCKETS - 1/2" DRIVE EXTENSIONS
1/2" DRIVE 12 POINT METRIC DRIVELINE

LIMITED CLEARANCE SOCKET SET
• Great for most limited access fasteners
• Includes driveline sockets for Chevrolet,
Chrysler, Dodge, Ford, GMC and Jeep models
• Remove and install driveline bolts, torque
converters, cylinder heads, and 4x4 transmission casings
2695 SET OF 7
SIZE SIZE
8mm 10mm
11mm 12mm
13mm 14mm
15mm 16mm
17mm
1/2" DRIVE IMPACT EXTENSION SET

2500
2503 3" 2510 10"
2505 5" 2515 15"
1/2" DRIVE SAE LOCKING IMPACT SET

• Features a positive locking ball detent and sliding collar for
quick release of sockets and accessories
2501
2503L 3" 2512L 12"
2506 6"
1/2" DRIVE IMPACT IMPACT

EXTENSION SET
• Wobble drive provides 15˚ offset in all directions
2504
2503W 3" 2510W 10"
2505W 5" 2515W 15"
SAE
S METRIC
SUNEX TOOLS
1/2" DRIVE EXTENSIONS - IMPACT SOCKETS 59
1/2" DRIVE TORQUE LIMITING

SOCKET SET
• Made of flexible spring steel that stops turning when the
required torque has been reached
• Torque limiting socket set will tighten wheel nuts to the
correct torque on most makes and models of foreign and
domestic cars, light trucks, and vans; these tools are
designed for used with a 1/2" impact wrench
2880 SET OF 10
MODEL SIZE
21755M 17mm / 55 ft. lbs. / 75 Nm
21780M 17mm / 80 ft. lbs. / 110 Nm
22180M 21mm / 80 ft. lbs. / 110 Nm
21910M 19mm (3/4") / 100 ft. lbs. / 135 Nm
21965M 19mm (3/4") / 65 ft. lbs. / 90 Nm
21980M 19mm (3/4") / 80 ft. lbs. 110 Nm
22212M 22mm (7/8") / 120 ft. lbs. / 160 Nm
22214M 22mm (7/8") / 140 ft. lbs. / 190 Nm
22610 13/16" / 100 ft. lbs. / 135 Nm

23014 15/16" / 140 ft. lbs. / 190 Nm
INDIVIDUAL TRUCK
TORQUE EXTENSIONS
• Provides the ability to torque inner and outer cap nuts
and flange nuts on heavy duty trucks
• Torque sockets and extensions allow user to ensure that
lug nuts are tightened to the required torque specification
• Designed to extend life of thin wall impact sockets
MODEL SIZE
3/4" DRIVE TRUCK TORQUE EXTENSIONS
4315TE 3/4" / 175 ft. lbs. / 240 Nm

4320TE 3/4" / 250 ft. lbs. / 350 Nm
4325TE 3/4" / 350 ft. lbs. / 475 Nm
4330TE 3/4" / 475 ft. lbs. / Nm
1" DRIVE TRUCK TORQUE EXTENSIONS & SOCKETS
5315TE 1" / 175 ft. lbs. / 240 Nm

5320TE 1" / 250 ft. lbs. / 350 Nm
5325TE 1" / 350 ft. lbs. /475 Nm
5330TE 1" / 400 ft. lbs. / 545 Nm
5335TE 1" / 475 ft. lbs. / 650 Nm
5340TE 1" / 550 ft. lbs. / 750 Nm
5345TE 1" / 650 ft. lbs. / 880 Nm
1" DRIVE TRUCK TORQUE EXTENDED SOCKET
533TS 33mm / 475 ft. lbs. / 650 nm
540TS 1 1/4" / 250 ft. lbs. / 350 Nm
548TS 1 1/2" / 475 ft. lbs. / 650 Nm
SUNEXTOOLS.COM
60 IMPACT SOCKETS - 1/2" DRIVE EXT. / HEX
1/2" DRIVE TORQUE LIMITING

EXTENSION SET
• Made of flexible spring steel that stops turning when the
required torque has been reached
• This set contains the most popular sizes and torque ratings
needed in the automotive service industry; torque limiting
extensions often extend the life of thin wall impact sockets
by limiting the torque to the required rating
2450 SET OF 5
MODEL SIZE
2465 65 ft. lbs. Extension / 90 Nm
1/2" DRIVE SAE & METRIC MASTER 1/2" DRIVE 6" LONG IMPACT HEX
IMPACT HEX DRIVER SET DRIVER MASTER SET
2637 SET OF 20 2637L SET OF 20

26581 1/4" 26485 1/2" 26481L 1/4" 264811L 9/32"
264811 9/32" 26486 9/16" 26482L 5/16" 26483L 3/8"
26482 5/16" 26487 5/8" 26484L 7/16" 26485L 1/2"
26583 3/8" 26488 11/16" 26486L 9/16" 26487L 5/8"
26484 7/16" 26489 3/4" 26488L 11/16" 26489L 3/4"

26491 6mm 26497 14mm 26491L 6mm 26492L 7mm
26492 7mm 264912 15mm 26493L 8mm 26495L 10mm
26493 8mm 26499 17mm 26496L 12mm 26497L 14mm
26495 10mm 264913 18mm 264912L 15mm 26499L 17mm
26496 12mm 264910 19mm 264913L 18mm 264910L SAE METRIC
19mm
SUNEX TOOLS
1/2" DRIVE HEX - IMPACT SOCKETS 61
1/2" DRIVE SAE IMPACT

HEX DRIVER SET
• Includes popular SAE hex sizes used for automotive repair
2638 SET OF 10

26581 1/4" 26485 1/2"
264811 9/32" 26486 9/16"
26482 5/16" 26487 5/8"
26583 3/8" 26488 11/16"
26484 7/16" 26489 3/4"
1/2" DRIVE 6" LONG SAE IMPACT

HEX DRIVER MASTER SET
2638L SET OF 10

26481L 1/4" 264811L 9/32"
26482L 5/16" 26483L 3/8"
26484L 7/16" 26485L 1/2"
26486L 9/16" 26487L 5/8"
26488L 11/16" 26489L 3/4"
1/2" DRIVE METRIC IMPACT

HEX DRIVER SET
2639 SET OF 10

26491 6mm 26497 14mm
26492 7mm 264912 15mm
26493 8mm 26499 17mm
26495 10mm 264913 18mm
26496 12mm 264910 19mm
SUNEXTOOLS.COM
62 IMPACT SOCKETS - 1/2" DRIVE HEX / SPECIALTY
1/2" DRIVE 6" LONG METRIC IMPACT

HEX DRIVER MASTER SET
2639L SET OF 10

26491L 6mm 26492L 7mm
26493L 8mm 26495L 10mm
26496L 12mm 26497L 14mm
264912L 15mm 26499L 17mm
264913L 18mm 264910L 19mm
1/2" DRIVE INTERNAL STAR

IMPACT SOCKET SET
2690S SET OF 8
2670S1 T30 2690S5 T50
2690S2 T40 2690S6 T55
2690S3 T45 2690S7 T60
2690S4 T47 2690S8 T70
1/2" DRIVE EXTERNAL STAR

IMPACT SOCKET SET
2690SE SET OF 9
2670SE1 E10 2690SE6 E18
2690SE2 E11 2690SE7 E20
2690SE3 E12 2690SE8 E22
2690SE4 E14 2690SE9 E24
2690SE5 E16
SAE METRIC
SUNEX TOOLS
1/2" DRIVE METRIC THIN WALL

WHEEL PROTECTOR IMPACT SOCKET
• Durable outer sleeve and insert protects high polished
wheels and lug nuts from damage
• Fully guaranteed
• Packaged on convenient storage rail
2842 SET OF 3
MODEL SIZE
284317 Metric 17mm
284319 Metric 19mm
284321 Metric 21mm
1/2" DRIVE METRIC THIN WALL

WHEEL PROTECTOR IMPACT SOCKET
• 150mm (5.9") length of these extra long thin wall sockets
enable usage of a standard impact wrench, rather than one
with a 2" anvil
• Fully guaranteed
2843 SET OF 3
MODEL SIZE
284317 Metric 17mm
284319 Metric 19mm
284321 Metric 21mm
1/2" DRIVE EXTRA THIN WALL WHEEL

PROTECTOR IMPACT SOCKET
2849 SET OF 9

28492 3/4" (lt. green) 28498 15/16" (brown)
28494 13/16" (purple) 284910 1" (silver)
28496 7/8" (green) 284912 1-1/16" (black)

284917 17mm (blue) 284921 21mm (red
284919 19mm (yellow)
SUNEXTOOLS.COM
HUB CAP AND WHEEL LOCK

REMOVAL KIT
• Easily removes most lug nuts and wheel locks on most
domestic and import passenger vehicles and light trucks
2840 SET OF 9
MODEL SIZE
28401 Ford & Chrysler Hubcap Lock Remover
28402 Ford Wheel Lock Remover
28403 GM "M" & "F" Body Wheel Lock Remover
28404 Oversized Wheel Lock Remover
28405 McGard Wheel Lock Remover
28406 Lug Nut Extractor Punch
28407 Chrysler Hubcap Lock Remover
28408 GM Hubcap Lock Remover
28409 GM Spline Hubcap Lock Remover
WHEEL BEARING LOCKNUT SET

• For use with 1/2" ratchet or breaker bar
2847 SET OF 7
ROUNDED HEX
28477 2-3/8" 28476 2-9/16"
28474 2-1/2" 28475 2-3/4"
6PT. HEX
28472 2-3/8" 28471 55mm
28473 2-1/2"
6 and 8 point locknut sockets fit rounded hex nuts WARNING: Use of this socket with an impact tool can cause serious injury.
found on Dana axles and some Ford trucks.
Measure from flat to flat to determine

the size of the locknut. Refer to the
1/2" DRIVE INDIVIDUAL WHEEL chart above to determine which socket
BEARING LOCKNUT SOCKETS is best for your project.
MODEL SIZE POINT MODEL SIZE POINT MODEL SIZE POINT MODEL SIZE POINT
10600 2-3/32" 6 10609 3-1/2" 8 10618 2-1/4" 6 10626 2-7/8" 8
10601 2-3/8" 8 10610 3-7/8" 6 10619 2-5/8" 6 10627 3-1/8" 6
10602 2-9/16" 6 10611 3-7/8" 8 10620 2-3/4" 6 10628 3-1/8" 8
10603 2-9/16" 8 10612 4" 6 10629 2-3/4" 8 10630 4-1/2" 8
10604 3" 6 10613 4-1/8" 6 10621 3-3/8" 8 10631 5-1/4" 6
10605 3" 8 10614 4-3/8" 6 10622 3-3/4" 8 10632 4-1/8" 8
10606 3-1/4" 6 10615 4-3/8" 8 10623 3-3/4" 6 10633 4-13/16" 8
10607 3-1/4" 8 10616 4-7/8" 6 10624 3-13/16" 8
10608 3-1/2" 6 10617 4-7/8" 8 10625 2-7/8" 6
SAE METRIC
SUNEX TOOLS
1/2" DRIVE METRIC DEEP SPINDLE NUT

IMPACT SOCKET SET
• Deep design for GM & Chrysler spindle nut applications
2838 SET OF 4

2800 30mm 2834 34mm
2832 32mm 2802 36mm
1/2" DRIVE 12 POINT METRIC DEEP

SPINDLE NUT IMPACT SOCKET SET
2837 SET OF 4

2800ZD 30mm 2806ZD 34mm
2804ZD 32mm 2802ZD 36mm
1/2" DRIVE METRIC DEEP SPINDLE NUT

IMPACT SOCKET SET
• Deep design for GM & Chrysler spindle nut applications
2839 SET OF 7

2830 29mm 2806 35mm
2800 30mm 2802 36mm
2832 32mm 2803 38mm
2834 34mm
1/2" DRIVE METRIC 12 POINT DEEP

SPINDLE NUT IMPACT SOCKET SET
2835 SET OF 8

2801ZD 29mm 2803ZD 35mm
2800ZD 30mm 2802ZD 36mm
2804ZD 32mm 2805ZD 38mm
2806ZD 34mm 2807ZD 39mm
SUNEXTOOLS.COM
1/2" DRIVE PIPE PLUG SOCKET SET
2841
524 3/4" 546 1-7/16"
526 13/16" 548 1-1/2"
528 7/8" 550 1-9/16"
530 15/16" 552 1-5/8"
532 1" 554 1-11/16"
534 1-1/16" 556 1-3/4"
536 1-1/8" 558 1-13/16"
538 1-3/16" 560 1-7/8"
540 1-1/4" 562 1-15/16" 1/2" DRIVE INDIVIDUAL
542 1-5/16" 564 2"
PIPE PLUG SOCKET SET
544 1-3/8"

DEEP THIN WALL FLIP SOCKET SET
2724 SET OF 4
MODEL SIZE
2706 3/4" x 13/16" Thin Wall Flip Socket
2710 7/8" x 15/16" Thin Wall Flip Socket
MODEL SIZE
2708 19mm x 21mm Deep Flip Socket
Includes: 3" Extension (2503)
1/2" DRIVE EP24 INVERTED STAR

PLUS IMPACT SOCKET
• Used to loosen and tighten all 2017 Ford truck bed bolts
224FTB
1/2" DRIVE 5/8" 12 POINT

DRIVELINE IMPACT SOCKET
• Designed for driveline applications and HD starters
• Eliminates the need for extensions and wobble sockets
220ZUDL
SAE METRIC
SUNEX TOOLS
1/2" DRIVE 17mm CONVEX EXTRA

THIN WALL WHEEL LUG SOCKET
• Non-marring socket for the safe and effective removal of the
convex (flower head) lug nuts on late model Mercedes S, GLK,
and CL Classes, and Maybach cars
• Precision design eliminates the need to replace the mangled
lug nuts left behind by standard wheel lug sockets
2714
1/2" DRIVE SPANNER SOCKET FORD

• Designed for use with 1985 and later Ford F250/F350
trucks with floating rear axle
10004
1/2" DRIVE AXLE FLANGE NUT SOCKET

MERCEDES BENZ
• Removes rear axle flange grooved nuts on Mercedes Benz
models 107, 114, 115, 116, and 126 axles with CV joints when
replacing axle seals and axle bearings
10203
1/2" PENTAGON BRAKE IMPACT SOCKET

• Pentagon shaped driver applicable for used on Citroën and
Peugeot calipers
10210
SUNEXTOOLS.COM
1/2 X 60 X 76 FOUR WHEEL DRIVE

SPINDLE NUT WRENCH
• Applicable for use on 1984-92 Ford Ranger and Bronco II with
manual hubs; 1986-95 For F-Series 1/2 ton pickup trucks; full
size Bronco with Dana 44 front axle; 1990-93 Dodge trucks with
Dana 44 automatic hubs
10200
1/2" DRIVE TIE ROD SOCKET

• Innovative, non-slip design
• Capable of removing most bolts that have 75% of their
corners stripped away
2801
1/2" DRIVE 12MM 12 POINT

FORD DRIVELINE SOCKET
• Specifically designed for driveline applications on Ford Mustang,
Crown Victoria, Taurus, Explorer, Expedition, Excursion, Ranger,
F150, and Mercury equivalents from 1980's to present
212ZUMDL

HONDA HEAD BOLT SOCKET
• For use with 1976 to current Honda head bolts
• Overall length of 4-1/2"
210MZB
SAE METRIC
SUNEX TOOLS

NISSAN HEAD BOLT SOCKET
• For use with 1976 to Nissan head bolts
212MZB

TOYOTA HEAD BOLT SOCKET
• For use with Toyota head bolts
214MZB
1/2" DRIVE 1-3/16" GM OIL PRESSURE

SENDING UNIT SOCKET
• For use when removing or replacing oil pressure sending units on
1987 to newer GM engines including 2.0L, 2.5L, 2.8L, and 3.0L
used in Chevy, Buick, Oldsmobile, Pontiac, and Cadillac; 1-3/16"
hex - turn with 1/2" square drive tools or 15/16" wrench
10003
1/2" DRIVE CRANKCASE PULLEY SOCKET

• Designed for use on most Honda/Acura engines for the removal
and installation of the crankshaft pulley bolt
10006
SUNEXTOOLS.COM
70 IMPACT SOCKETS - ADAPTERS, REDUCERS
3/8" & 1/2" DRIVE ADAPTER &
UNIVERSAL JOINT IMPACT SET
3305
3/8" Dr. Universal 1/2" (F) x 3/8"
3301 2301
Joint (M) Adapter
3/8" (F) x 1/2" 1/2" (F) x 3/4"
3300 2302
(M) Adapter (M) Adapter
1/2" Universal
2300
Joint
1/4", 3/8", 1/2" DRIVE

INTERNAL STAR IMPACT SOCKET SET
1820S SET OF 12
1820S1 T10 (1/4") 3670S5 T40 (3/8")
1820S2 T15 (1/4") 3670S6 T45 (3/8")
1820S3 T20 (1/4") 3670S7 T47 (3/8")
1820S4 T25 (1/4") 3670S8 T50 (3/8")
1820S5 T27 (1/4") 3670S9 T55 (3/8")
1820S6 T30 (1/4") 2690S7 T60 (1/2")

INTERNAL STAR SOCKETS

2690S1 T30 2690S5 T50
2690S2 T40 2690S6 T55
2690S3 T45 2690S7 T60
2690S4 T47 2690S8 T70

EXTERNAL STAR SOCKETS

2690SE1 E10 2690SE6 E18
2690SE2 E11 2690SE7 E20
2690SE3 E12 2690SE8 E22
2690SE4 E14 2690SE9 E24
2690SE5 E16 SAE METRIC
SUNEX TOOLS

UNIVERSAL JOINT
MODEL SIZE
1/2" DRIVE INDIVIDUAL DEEP

TRUCK WHEEL SOCKET
SAE HEAVY DUTY
Heavy Duty Deep
MODEL SIZE
240HDD 1-1/4"

SPECIALTY SOCKETS
MODEL SIZE
Deep Spindle Nut Tie Rod
2830 29mm Deep Spindle Nut
Heavy Duty Deep 2803 38mm Deep Spindle Nut
2801 Tie Rod Socket

WHEEL LOCK REMOVAL
Hubcap Lock Removers MODEL SIZE

28401 Ford & Chrysler Hubcap Locks
28402 Ford Wheel Locks & 18mm Lug Nuts
28403 Corvette, GM "M" & "F" Hubcap Locks
Lug Nut Remover 28404 Oversize McGard Wheel Locks
28405 McGard Wheel Locks and GM Hubcap Locks
28406 Extractor Punch
28407 Chrysler Hubcap Locks
Extractor Punch
28408 GM Hubcap Locks
28409 GM Spline Hubcap Locks
SUNEXTOOLS.COM
Deep Spindle Nut

FLIP SOCKETS
MODEL SIZE SPINDLE NUT SOCKETS
2700 3/4" x 13/16"
2701 3/4" x 13/16" Deep 12 Pt. SPINDLE NUT DEEP
2706 3/4" x 13/16" Thin Wall MODEL SIZE MODEL SIZE
2710 7/8" x 15/16" Thin Wall 2801ZD 29mm 2803ZD 35mm
2712 1" x 1-1/16" Thin Wall 2800ZD 30mm 2802ZD 36mm
2707 17mm x 19mm 2804ZD 32mm 2805ZD 38mm
2705 17mm x 21mm Deep 2806ZD 34mm 2807ZD 39mm

SPINDLE NUT DEEP
2702 19mm x 21mm
2703 3/4" x 13/16" with 3" Extension Bar
2830 29mm 2806 35mm
2704 19mm x 21mm Deep
2800 30mm 2802 36mm
2708 19mm x 21mm Deep Thin Wall
2832 32mm 2803 38mm
2713 21mm x 22mm
2834 34mm
1/2" DRIVE INDIVIDUAL UNIVERSAL

DRIVELINE 12 POINT DRIVE SAE & METRIC
LIMITED CLEARANCE SOCKETS

210ZUDL 5/16" 218ZUDL 9/16"
212ZUDL 3/8" 222ZUDL 11/16"
214ZUDL 7/16" 224ZUDL 3/4"
216ZUDL 1/2"

208ZUMDL 8mm 214ZUMDL 14mm
213ZUMDL 13mm
SAE METRIC
SUNEX TOOLS
1/2" DRIVE INDIVIDUAL METRIC

SOCKETS
Extra
Thin- Extra
Deep 12 Pt. Wall Wheel Long 12 Pt. Deep 12 Pt.
Size Std. Deep Univ. Univ. 12 Pt. Deep Deep Magnetic Protect. Deep Univ. Univ.
METRIC MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL
8mm 208M 208MD 208MXD
9mm 209M 209MD 209ZM 209ZMD 209MXD
10mm 210M 210MD 210UM 210UMD 210ZM 267210 210MMG 210MXD 210MZUD 210ZUM
15mm 215M 215MD 215UM 215UMD 215ZM 267215 215MMG 284915 215MXD 215MZUD 215ZUM
17mm 217M 217MD 217UM 217UMD 217ZM 267217 2617 217MMG 284917 217MXD 217MZUD 217ZUM
22mm 222M 222MD 222UM 222UMD 222ZM 267222 2622 222MXD 222MZUD 222ZUM
23mm 223M 223MD 223UM 223UMD 223ZM 267223 2623 223MXD 223MZUD 223ZUM
24mm 224M 224MD 224UM 224UMD 224ZM 267224 224MXD 224MZUD 224ZUM
25mm 225M 225MD 225ZM 225ZMD 225MXD
26mm 226M 226MD 226ZM 226ZMD 226MXD
27mm 227M 227MD 227ZM 227ZMD 227MXD
28mm 228M 228MD 228ZM 228ZMD 228MXD
29mm 229M 229MD 229ZM 229ZMD 229MXD
30mm 230M 230MD 230ZM 230ZMD 230MXD
31mm 231M 231MD 231ZM 231ZMD 231MXD
32mm 232M 232MD 232ZM 232ZMD 232MXD
33mm 233M 233MD 233ZM 233ZMD 233MXD
34mm 234M 234MD 234ZM 234ZMD 234MXD
35mm 235M 235MD 235ZM 235ZMD 235MXD
36mm 236M 236MD 236ZM 236ZMD 236MXD
37mm 237MXD
38mm 238MXD
SUNEXTOOLS.COM
1/2" DRIVE INDIVIDUAL SAE

SOCKETS
Extra Extra
Long Deep 12 Pt. Thin-Wall Wheel 8 Pt. 12 Pt. Deep 12 Pt.
Size Std. Deep Deep Univ. Univ. 12 Pt. Deep Deep Magnetic Protect. Deep Univ. Univ.
SAE MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL MODEL
5/16" 210 210D 210XD
3/8" 212 212D 212XD 212U 212UD 212Z 26701 212MG 212QD 212ZUD 212UZ
3/4" 224 224D 224XD 224U 224UD 224Z 26707 2624 224MG 28492 224QD 224ZUD 224UZ
15/16" 230 230D 230XD 230U 230UD 230Z 267010 230MG 28498 230QD 230ZUD 230UZ
1" 232 232D 232XD 232U 232Z 267011 2632 232MG 284910 232QD 232ZUD 232UZ
1-1/16" 234 234D 234XD 234U 234Z 267012 2634 284912 234QD 234ZUD 234UZ
1-1/8" 236 236D 236XD 236U 236Z 267013 236QD 236ZUD 236UZ
1-3/16" 238 238D 238XD 238U 238Z 267014 238ZUD 238UZ
1-1/4" 240 240D 240XD 240U 240Z 267015 240ZUD 240UZ
1-5/16" 242 242D 242XD 242Z 242ZD
1-3/8" 244 244D 244XD 244Z 244ZD
1-7/16" 246 246D 246XD 246Z 246ZD
1-1/2" 248 248D 248XD 248Z 248ZD
1-9/16" 250 250D
1-5/8" 252 252D
1-11/16" 254 254D
1-3/4" 256 256D
1-13-16" 258 258D
1-7/8" 260 260D
1-15/16" 262 262D
2" 264 264D
2-1/16" 266 266D
2-1/8" 268 268D
2-3/16" 270 270D
2-1/4" 272 272D
SAE METRIC
SUNEX TOOLS
3/4" DRIVE SAE

IMPACT SOCKET SET
4696 SET OF 29

424 3/4" 454 1-11/16"
426 13/16" 456 1-3/4"
428 7/8" 458 1-13/16"
430 15/16" 460 1-7/8"
432 1" 462 1-15/16"
434 1-1/16" 464 2"
436 1-1/8" 466 2-1/16"
438 1-3/16" 468 2-1/8"
440 1-1/4" 470 2-3/16"
442 1-5/16" 472 2-1/4"
444 1-3/8" 474 2-5/16"
446 1-7/16" 476 2-3/8"
448 1-1/2" 478 2-7/16"
450 1-9/16" 480 2-1/2"
452 1-5/8"
3/4" DRIVE SAE DEEP

IMPACT SOCKET SET
4695 SET OF 29

424D 3/4" 454D 1-11/16"
426D 13/16" 456D 1-3/4"
428D 7/8" 458D 1-13/16"
430D 15/16" 460D 1-7/8"
432D 1" 462D 1-15/16"
434D 1-1/16" 464D 2"
436D 1-1/8" 466D 2-1/16"
438D 1-3/16" 468D 2-1/8"
440D 1-1/4" 470D 2-3/16"
442D 1-5/16" 472D 2-1/4"
444D 1-3/8" 474D 2-5/16"
446D 1-7/16" 476D 2-3/8"
448D 1-1/2" 478D 2-7/16"
450D 1-9/16" 480D 2-1/2"
452D 1-5/8"
SUNEXTOOLS.COM
3/4" DRIVE
METRIC IMPACT SOCKET SET
4692 SET OF 26

419M 19mm 433M 33mm
420M 20mm 434M 34mm
421M 21mm 435M 35mm
422M 22mm 436M 36mm
423M 23mm 438M 38mm
424M 24mm 439M 39mm
425M 25mm 440M 40mm
426M 26mm 441M 41mm
427M 27mm 442M 42mm
428M 28mm 443M 43mm
429M 29mm 444M 44mm
430M 30mm 446M 46mm
431M 31mm 450M 50mm

IMPACT SOCKET SET
4693 SET OF 26

419MD 19mm 433MD 33mm
420MD 20mm 434MD 34mm
421MD 21mm 435MD 35mm
422MD 22mm 436MD 36mm
423MD 23mm 438MD 38mm
424MD 24mm 439MD 39mm
425MD 25mm 440MD 40mm
426MD 26mm 441MD 41mm
427MD 27mm 442MD 42mm
428MD 28mm 443MD 43mm
429MD 29mm 444MD 44mm
430MD 30mm 446MD 46mm
431MD 31mm 450MD 50mm
SAE METRIC
SUNEX TOOLS
3/4" DRIVE SAE HEAVY DUTY

IMPACT SOCKET SET
4683 SET OF 17

432 1" 450 1-9/16"
434 1-1/16" 452 1-5/8"
436 1-1/8" 454 1-11/16"
438 1-3/16" 456 1-3/4"
440 1-1/4" 458 1-13/16"
442 1-5/16" 460 1-7/8"
444 1-3/8" 462 1-15/16"
446 1-7/16" 464 2"
448 1-1/2"
3/4" DRIVE SAE DEEP

IMPACT SOCKET SET
4685 SET OF 17

432D 1" 450D 1-9/16"
434D 1-1/16" 452D 1-5/8"
436D 1-1/8" 454D 1-11/16"
438D 1-3/16" 456D 1-3/4"
440D 1-1/4" 458D 1-13/16"
442D 1-5/16" 460D 1-7/8"
444D 1-3/8" 462D 1-15/16"
446D 1-7/16" 464D 2"
448D 1-1/2"
3/4" DRIVE METRIC HEAVY DUTY

IMPACT SOCKET SET
4684 SET OF 17

426M 26mm 438M 38mm
427M 27mm 440M 40mm
428M 28mm 441M 41mm
429M 29mm 442M 42mm
430M 30mm 443M 43mm
432M 32mm 444M 44mm
433M 33mm 445M 45mm
435M 35mm 446M 46mm
436M 36mm
SUNEXTOOLS.COM
3/4" DRIVE METRIC
4686 SET OF 17

426MD 26mm 436MD 36mm
427MD 27mm 438MD 38mm
428MD 28mm 439MD 39mm
429MD 29mm 440MD 40mm
430MD 30mm 441MD 41mm
431MD 31mm 442MD 42mm
432MD 32mm 443MD 43mm
433MD 33mm 444MD 44mm
435MD 35mm
3/4" DRIVE DEEP SAE

IMPACT SOCKET SET
4638 SET OF 14

424D 3/4" 438D 1-3/16"
426D 13/16" 440D 1-1/4"
428D 7/8" 442D 1-5/16"
430D 15/16" 444D 1-3/8"
432D 1" 446D 1-7/16"
434D 1-1/16" 448D 1-1/2"
436D 1-1/8" 452D 1-5/8"
3/4" DRIVE SAE

IMPACT SOCKET SET
4680 SET OF 8

432 1" 442 1-5/16"
434 1-1/16" 444 1-3/8"
436 1-1/8" 446 1-7/16"
440 1-1/4" 448 1-1/2"
SAE METRIC
SUNEX TOOLS
3/4" DRIVE / HEX DRIVERS - IMPACT SOCKETS 79
3/4" DRIVE SAE DEEP

IMPACT SOCKET SET
4681 SET OF 8

432D 1" 442D 1-5/16"
434D 1-1/16" 444D 1-3/8"
436D 1-1/8" 446D 1-7/16"
440D 1-1/4" 448D 1-1/2"
3/4" DRIVE 12 POINT

SAE THIN WALL IMPACT SOCKET SET
4687 SET OF 9

424ZT 3/4" 434ZT 1-1/16"
426ZT 13/16" 436ZT 1-1/8"
428ZT 7/8" 438ZT 1-3/16"
430ZT 15/16" 440ZT 1-1/4"
432ZT 1"
3/4" DRIVE SAE

4506 SET OF 5

45061 3/4" 45064 1-1/8"
45062 7/8" 45065 1-1/4"
45063 1"
3/4" DRIVE METRIC

4507 SET OF 5

450714 14mm 450722 22mm
450717 17mm 450724 24mm
450719 19mm
SUNEXTOOLS.COM
3/4" DRIVE SAE TRUCK SERVICE
IMPACT SOCKET SET
4682 SET OF 11

424 3/4" 434 1-1/16"
426 13/16" 436 1-1/8"
428 7/8" 438 1-3/16"
430 15/16" 440 1-1/4"
432 1" 448 1-1/2"
SQUARE SOCKET
MODEL SIZE
426S 13/16"
3/4" DRIVE TRUCK SERVICE METRIC

IMPACT SOCKET SET
4011M SET OF 11
DEEP SOCKETS
427MD 27mm 435MD 35mm
430MD 30mm 436MD 36mm
432MD 32mm 438MD 38mm
433MD 33mm 441MD 41mm
SQUARE SOCKETS
417MSS 17mm 421MSS 21mm
420MS 20mm
3/4" DRIVE METRIC TRUCK SERVICE

IMPACT SOCKET SET
4070M SET OF 7
DEEP SOCKETS
427M 27mm 435MD 35mm
430MD 30mm 441MD 41mm
433MD 33mm
SQUARE SOCKETS
SAE METRIC
SUNEX TOOLS
3/4" DRIVE SAE & METRIC WHEEL

SERVICE IMPACT SOCKET SET
4050 SET OF 5
DEEP SOCKETS
434D 1-1/16" 448D 1-1/2"
440D 1-1/4"
DEEP SOCKET SQUARE SOCKET
433MD 33mm 426S 13/16"
3/4" DRIVE METRIC WHEEL SERVICE

IMPACT SOCKET SET
4050M SET OF 5
STANDARD SOCKETS
427M 27mm 430M 30mm
DEEP SOCKETS
433MD 33mm 435MD 35mm
SQUARE SOCKETS
417MSS 17mm
3/4" DRIVE WHEEL SERVICE

IMPACT SOCKET SET
4632 SET OF 11
DEEP POINT SOCKETS
424D 3/4" 432D 1"
426D 13/16" 438D 1-3/16"
428D 7/8"
DEEP POINT SOCKET
MODEL SIZE
433MD 33mm
THIN WALL DEEP SOCKETS
434DT 1-1/16" 440DT 1-1/4"
436DT 1-1/8"
DEEP BUDD WHEEL SOCKET 4 POINT SQUARE SOCKET
448DH 1-1/2" 426S 13/16"
SUNEXTOOLS.COM
82 IMPACT SOCKETS - 3/4" DRIVE / SPECIALTY
3/4" DRIVE COMBINATION BUDD WHEEL

IMPACT SOCKET SET
4626 SET OF 4
SQUARE BUDD WHEEL SOCKETS
4826C 1-1/2" x 13/16" 4121C 41mm x 21mm
43517B 35mm x 17mm
DEEP SOCKET
MODEL SIZE
433MD 33mm
3/4" DRIVE TRUCK PINION LOCKNUT

IMPACT SOCKET SET
• 7 extra thin wall deep impact sockets for removing or installing
transmission and differential end yoke lock nuts on most trucks
4667 SET OF 7
464AN 2" 468AN 2-1/8"
472AN 2-1/4" 476AN 2-3/8"
480AN 2-1/2" 484AN 2-5/8"
488AN 2-3/4"
3/4" & 1" DRIVE ADAPTER &

UNIVERSAL JOINT IMPACT SET
4405
3/4" Dr. Universal 1" (F) x 3/4"
4304 5303
Joint (M) Reducer
3/4" (F) x 1/2" 1" Dr. Universal
4301 5304
(M) Reducer Joint
3/4" (F) x 1"
4300
(M) Adapter
SAE METRIC
SUNEX TOOLS
3/4" DRIVE METRIC INDIVIDUAL

TRUCK WHEEL SOCKETS HEAVY DUTY
DOUBLE COMB. BUDD
Square Combination Budd Wheel Deep Hex Budd Wheel
SIZE SQUARE SQUARE WHEEL EXTRA LONG
Metric Model# Model# Model# Model#

17mm 417MSS
19mm 419MS
Extra Long
20mm 420MS
21mm 421MSS
33mm 433MXL
35 X 20mm 43517B
41 X 21mm 4121C
3/4" DRIVE SAE INDIVIDUAL

Square Heavy Duty Square
LIMITED DEEP
HEAVY DEEP COMB. DEPTH HEX
DUTY THIN BUDD BUDD BUDD EXTRA
SIZE SQUARE SQUARE WALL WHEEL WHEEL WHEEL LONG
Deep Thin Wall Combination Budd Wheel
SAE MODEL MODEL MODEL MODEL MODEL MODEL MODEL
13/16" 426S 426HDS 426XL
15/16" 430S
Limited Depth Budd Wheel Deep Hex Budd Wheel 1-1/16" 434DT 434XL
1-1/8" 436DT 436XL
1-1/4" 440DT 440XL
1-1/2" 448LD 448DH 448XL
Extra Long 1-1/2 x 13/16" 4826C
3/4" DRIVE INDIVIDUAL 3/4" DRIVE INDIVIDUAL

UNIVERSAL JOINT RETAINING PIN & RING SET
4304 Universal Joint 4303 Pin & Ring Set
SUNEXTOOLS.COM
3/4" DRIVE SAE
INDIVIDUAL SOCKETS
SIZE STANDARD DEEP 12 POINT THIN WALL
SAE MODEL MODEL MODEL

1/2" 416 416D
9/16" 418 418D Standard Deep
5/8" 420 420D 420ZT
11/16" 422 422D 422ZT
3/4" 424 424D 424ZT
13/16" 426 426D 426ZT
12 Point Thin Wall
7/8" 428 428D 428ZT
15/16" 430 430D 430ZT
1" 432 432D 432ZT
1-1/16" 434 434D 434ZT
1-1/8" 436 436D 436ZT
1-3/16" 438 438D 438ZT
1-1/4" 440 440D 440ZT
1-5/16" 442 442D
1-3/8" 444 444D 444ZT
1-7/16" 446 446D
1-1/2" 448 448D 448ZT
1-9/16" 450 450D
1-5/8" 452 452D 452ZT
1-11/16" 454 454D
1-3/4" 456 456D 456ZT
1-13/16" 458 458D
1-7/8" 460 460D 460ZT
1-15/16" 462 462D
2" 464 464D
2-1/16" 466 466D
2-1/8" 468 468D
2-3/16" 470 470D
2-1/4" 472 472D
2-5/16" 474 474D
2-3/8" 476 476D
2-7/16" 478 478D
2-1/2" 480 480D
2-9/16" 482 482D
2-5/8" 484 484D
2-11/16" 486 486D
2-3/4" 488 488D
2-13/16" 490 490D
2-7/8" 492 492D
2-15/16" 494 494D
3" 496 496D
SAE METRIC
SUNEX TOOLS
3/4" DRIVE METRIC

INDIVIDUAL SOCKETS
SIZE STANDARD DEEP 12 POINT THIN WALL
METRIC MODEL MODEL MODEL

15mm 415MZT
Standard Deep
16mm 416MZT
17mm 417MZT
18mm 418MZT
19mm 419M 419MD 419MZT
12 Point Thin Wall
20mm 420M 420MD 420MZT
21mm 421M 421MD 421MZT
22mm 422M 422MD 422MZT
23mm 423M 423MD 423MZT
24mm 424M 424MD 424MZT
25mm 425M 425MD 425MZT
26mm 426M 426MD 426MZT
27mm 427M 427MD 427MZT
28mm 428M 428MD 428MZT
29mm 429M 429MD 429MZT
30mm 430M 430MD 430MZT
31mm 431M 431MD
32mm 432M 432MD 432MZT
33mm 433M 433MD 433MZT
34mm 434M 434MD
35mm 435M 435MD 435MZT
36mm 436M 436MD 436MZT
37mm
38mm 438M 438MD 438MZT
39mm 439MD
40mm 440M 440MD 440MZT
41mm 441M 441MD
42mm 442M 442MD
43mm 443M 443MD
44mm 444M 444MD
45mm 445M
46mm 446M 446MD
47mm 447M 447MD
48mm 448M 448MD
49mm 449M 449MD
50mm 450M 450MD
52mm 452M 452MD
54mm 454M
55mm 455M 455MD
56mm 456M
60mm 460M 460MD
63mm 463M
65mm 465M 465MD
SUNEXTOOLS.COM
86 IMPACT SOCKETS - 1" DRIVE
OVER 30"
OVE OVER 30"
in Height with Locking Case,
in Height with Locking Case,
Handle and Wheel Kit
Handle and Wheel Kit
1" DRIVE SAE IMPACT SOCKET SET 1" DRIVE SAE DEEP IMPACT SOCKET SET
5692 SET OF 21 5693 SET OF 21

524 3/4" 546 1-7/16" 524D 3/4" 546D 1-7/16"
526 13/16" 548 1-1/2" 526D 13/16" 548D 1-1/2"
528 7/8" 550 1-9/16" 528D 7/8" 550D 1-9/16"
530 15/16" 552 1-5/8" 530D 15/16" 552D 1-5/8"
532 1" 554 1-11/16" 532D 1" 554D 1-11/16"
534 1-1/16" 556 1-3/4" 534D 1-1/16" 556D 1-3/4"
536 1-1/8" 558 1-13/16" 536D 1-1/8" 558D 1-13/16"
538 1-3/16" 560 1-7/8" 538D 1-3/16" 560D 1-7/8"
540 1-1/4" 562 1-15/16" 540D 1-1/4" 562D 1-15/16"
542 1-5/16" 564 2" 542D 1-5/16" 564D 2"
544 1-3/8" 544D 1-3/8"
1" DRIVE SAE

IMPACT SOCKET SET
5699 SET OF 9

532 1" 552 1-5/8"
536 1-1/8" 556 1-3/4"
540 1-1/4" 560 1-7/8"
544 1-3/8" 564 2"
548 1-1/2"
SAE METRIC
SUNEX TOOLS
1" DRIVE / HEX DRIVERS - IMPACT SOCKETS 87
1" DRIVE SAE DEEP

IMPACT SOCKET SET
5681 SET OF 8

528D 7/8" 536D 1-1/8"
530D 15/16" 538D 1-3/16"
532D 1" 540D 1-1/4"
534D 1-1/16" 548D 1-1/2"
1" DRIVE METRIC DEEP

IMPACT SOCKET SET
5697M SET OF 8
DEEP SOCKETS
527MD 27mm 536MD 36mm
533MD 33mm 541MD 41mm
535MD 35mm
SQUARE SOCKETS
1" DRIVE SAE

5606 SET OF 6

56061 3/4" 56064 1-1/8"
56062 7/8" 56065 1-1/4"
56063 1" 56066 1-3/8"
1" DRIVE METRIC

5607 SET OF 6

560714 14mm 560722 22mm
560717 17mm 560724 24mm
560719 19mm 560727 27mm
SUNEXTOOLS.COM
88 IMPACT SOCKETS - 1" DRIVE
1" DRIVE SAE & METRIC HEAVY DUTY
WHEEL IMPACT SOCKET SET
5690A SET OF 10
DEEP SOCKETS
532D 1" 556D 1-3/4"
538D 1-3/16"
DEEP SOCKET
MODEL SIZE
533M 33mm
DEEP THIN WALL SOCKETS
534DT 1-1/16" 540DT 1-1/4"
536DT 1-1/8"
SQUARE SOCKET
526S 13/16" 530S 15/16"
CONTROLLED DEPTH SOCKET
MODEL SIZE
548CDS 1-1/2"
1" DRIVE SAE & METRIC

WHEEL SERVICE IMPACT SOCKET SET
WHEEL SERVICE IMPACT SOCKET SET 5688 SET OF 8
STANDARD SOCKETS
5685 SET OF 5
DEEP SOCKET DEEP SOCKET 528 7/8" 532 1"
STANDARD SOCKET
MODEL SIZE
548D 1-1/2" 533MD 33mm
DEEP THIN WALL SOCKETS 533M 33mm
DEEP THIN WALL SOCKETS
536DT 1-1/8" 540DT 1-1/4"
SQUARE SOCKET 534DT 1-1/16" 540DT 1-1/4"
MODEL SIZE 536DT 1-1/8"
SQUARE SOCKET CONTROLLED DEPTH SOCKET
526S 13/16"
526S 13/16" 548CDS 1-1/2"
SAE METRIC
SUNEX TOOLS
1" DRIVE - IMPACT SOCKETS 89

COMBINATION BUDD WHEEL
IMPACT SOCKET SET
5626 SET OF 5
SQUARE BUDD WHEEL SOCKET
MODEL SIZE
5826C 1-1/2" x 13/16"
SQUARE BUDD WHEEL SOCKETS
53517 35mm x 17mm 54121 41mm x 21mm
53820 38mm x 20mm
DEEP SOCKET
MODEL SIZE
533MD 33mm
1" DRIVE SAE

IMPACT SOCKET SET
5616 SET OF 14

566 2-1/16" 588 2-3/4"
580 2-1/2" 576 2-3/8"
568 2-1/8" 574 2-5/16"
586 2-11/16" 584 2-5/8"
590 2-13/16" 592 2-7/8"
594 2-15/16" 582 2-9/16"
570 2-3/16" 596 3"
SUNEXTOOLS.COM
90 IMPACT SOCKETS - 1" DRIVE INDIVIDUALS
1" DRIVE SAE

INDIVIDUAL SOCKETS
SIZE STANDARD DEEP SIZE STANDARD DEEP
Standard
SAE MODEL MODEL SAE MODEL MODEL
3/4" 524 524D 2-1/4" 572 572D
13/16" 526 526D 2-5/16" 574 574D
7/8" 528 528D 2-3/8" 576 576D
15/16" 530 530D 2-7/16" 578 578D Deep
1" 532 532D 2-1/2" 580 580D
1-1/16" 534 534D 2-9/16" 582 582D
1-1/8" 536 536D 2-5/8" 584 584D
1-3/16" 538 538D 2-11/16" 586 586D
1-1/4" 540 540D 2-3/4" 588 588D
1-5/16" 542 542D 2-13/16" 590 590D
1-3/8" 544 544D 2-7/8" 592 592D
1-7/16" 546 546D 2-15/16" 594 594D
1-1/2" 548 548D 3" 596 596D
1-9/16" 550 550D 3-1/8" 5100 5100D
1-5/8" 552 552D 3-1/4" 5104 5104D
1-11/16" 554 554D 3-3/8" 5108 5108D
1-3/4" 556 556D 3-1/2" 5112 5112D
1-13/16" 558 558D 3-5/8" 5116 5116D
1-7/8" 560 560D 3-3/4" 5120 5120D
1-15/16" 562 562D 3-7/8" 5124 5124D
2" 564 564D 4" 5128 5128D
2-1/16" 566 566D 4-1/8" 5132 5132D
2-1/8" 568 568D 4-1/4" 5136 5136D
2-3/16" 570 570D 4-1/2" 5140 5140D
SAE METRIC
SUNEX TOOLS
1" DRIVE INDIVIDUALS - IMPACT SOCKETS 91
1" DRIVE SAE INDIVIDUAL

Deep Thin Wall Square DEEP COMB. HEAVY
THIN EXTRA BUDD CONT. DUTY EXTRA
SIZE SQUARE WALL LONG WHEEL DEPTH SQUARE DEEP
SAE MODEL# MODEL# MODEL# MODEL# MODEL# MODEL# MODEL#

13/16" 526S 526HDS
Extra Long
15/16" 530S
1-1/16" 534DT
1-1/8" 536DT
1-1/4" 540DT 540EL
Controlled Depth Combination Budd Wheel 1-5/16" 542DT

1-1/2" 548DT 548CDS
1-3/4" 556XD
1-1/2" 5826C
x 13/16"
Heavy Duty Square Extra Deep
1" DRIVE METRIC

INDIVIDUAL SOCKETS
Standard SIZE STANDARD DEEP SIZE STANDARD DEEP
METRIC MODEL MODEL METRIC MODEL MODEL

19mm 519M 519MD 38mm 538M 538MD
21mm 521M 521MD 40mm 540M 540MD
Deep 22mm 522M 522MD 41mm 541M 541MD

23mm 523M 523MD 42mm 542M 542MD
24mm 524M 524MD 46mm 546M 546MD
25mm 525M 525MD 50mm 550M 550MD
26mm 526M 526MD 52mm 552M
27mm 527M 527MD 54mm 554M 554MD
28mm 528M 55mm 555M 555MD
29mm 529M 529MD 56mm 556M 556MD
30mm 530M 530MD 58mm 558M 558MD
32mm 532M 532MD 60mm 560M 560MD
33mm 533M 533MD 65mm 565M 565MD
35mm 535M 535MD 70mm 570M 570MD
36mm 536M 536MD
SUNEXTOOLS.COM
92 IMPACT SOCKETS - 1" DRIVE INDIVIDUALS
1" DRIVE METRIC INDIVIDUAL
Square
DEEP THIN COMB. BUDD
SIZE SQUARE WALL EXTRA LONG WHEEL
METRIC MODEL MODEL MODEL MODEL

17mm 517MSS Extra Long
19mm 519MS
20mm 520MS
21mm 521MSS
33mm 533MEL
Deep Thin Wall
41mm 541MDT
35 x 17mm 53517
38mm 53820
41 x 21mm 54121
Combination Budd Wheel
-
%
5
Standard Deep
1" DRIVE INDIVIDUAL

#5 SPLINE DRIVE SAE UNIVERSAL JOINT
INDIVIDUAL SOCKETS
MODEL SIZE
SAE MODEL MODEL SAE MODEL MODEL
7/8" 5500S 1-13/16" 5536
15/16" 5525 1-7/8" 5508
1-1/16" 5526 1-15/16" 5537
1-1/8" 5502 2" 5509
1-3/16" 5504 2-1/8" 5568
1-1/4" 5503 2-1/4" 5572
1-5/16" 5534 2-3/8" 5576
1-3/8" 5533 2-1/2" 5580
1-7/16" 5535 2-5/8" 5584
1" DRIVE INDIVIDUAL
1-1/2" 5505 5548D 2-3/4" 5588
1-5/8" 5506 5552D 3" 5596
RETAINING PIN & RING SETS
1-3/4" 5507 5556D 3-1/8" 5600
1" 5501 MODEL SIZE
5301 1-11/16" Pin & Ring Set
5302 1-3/4" Pin & 1-7/8" Ring
SAE METRIC
SUNEX TOOLS
#5 SPLINE DRIVE - IMPACT SOCKETS 93
#5 SPLINE DRIVE METRIC

INDIVIDUAL SOCKETS
-

%
%
5 METRIC MODEL MODEL METRIC MODEL MODE#
Standard Deep 22mm 5522M 33mm 5533M 5533MD
24mm 5524M 35mm 5535M
25mm 5525M 36mm 5536MD
27mm 5527M 38mm 5538M
29mm 5529M 40mm 5540M
30mm 5530M 41mm 5541M
32mm 5532M 46mm 5546M
#5 SPLINE DRIVE INDIVIDUAL SAE &

METRIC SPECIALTY SOCKETS
HEAVY DUTY THIN DEEP THIN EXTRA
%
E
-
SIZE SQUARE SQUARE WALL WALL DEEP HEX

%
%
¡
-
%
E
4
4 5
4
5

-
-
SAE MODEL MODEL MODEL MODEL MODEL

Square Heavy Duty Square Thin Wall
13/16" 5532 5532HDS
%
7/8" 5500S
5 U 15/16" 5510

- -
1-1/16" 5527
Deep Thin Wall Extra Deep Hex 1-1/8" 5528
1-1/4" 5529
1-5/16" 5542DT
1-1/2" 5548DT 5548XDH
1-1/2" x 13/16" 5530
17mm 5517MSS
21mm 5521MSS
35mm 5535MDT
41mm 5541MDT
SUNEXTOOLS.COM
94 IMPACT SOCKETS - SPECIALTY
SMALL BLOCK CHEVY, CHEVY V6 & 4 CYL.

ENGINES CRANKSHAFT TURNING SOCKET
• Aluminum metal construction
• Fits 1.255 ID Crank Snout with 3/16" keyway
10000
SMALL BLOCK FORD, BUICK & PONTIAC

CRANKSHAFT TURNING SOCKET
• Fits 1.385 ID Crank Snout with 3/16" & 1/4" keyways
10001
CRANKSHAFT TURNING SOCKET

BIG BLOCK CHEVY
• Fits 1.610 ID Crank Snout with 3/16" keyway
10002
5.5MM FORD DISTRIBUTOR

MODULE SOCKET
• Designed for use on 7/32" hex retaining bolts on Ford
distributor modules
10009
UNIVERSAL OXYGEN SENSOR SOCKET

• Works on all domestic and imported vehicles with oxygen sensors;
slot in socket's side allows wire clearance — 7/8" hex, 3-7/8"
socket length
10010
WARNING: Use of this socket with an impact tool can cause serious injury. SAE METRIC
SUNEX TOOLS
SPECIALTY - IMPACT SOCKETS 95
DEEP OIL SWITCH SOCKET

• Remove and replace oil pressure sending units on 1987
to newer GM engines
10011
3-5/8" AXLE NUT SPANNER SOCKET

• Six-lug, spanner-type wrench removes and installs rear wheel
bearing locknuts; services 1954-current Chevrolet and GMC
15,000 lb. axles; 1966-current 17,000 lb. 2 speed axles;
1965-current 15,000 lb. trailing axles
10205

• Six-lug, spanner-type wrench removes and installs rear wheel
bearing locknuts; services 1954-current Chevrolet and GMC
11,000 to 13,500 lb. axles
10206

• Six-lug, spanner-type socket removes and installs rear wheel
bearing locknuts on 1946-present Chevrolet and GMC 5200 and
7200 lb axles
10207
SUNEXTOOLS.COM
96 IMPACT SOCKETS - SPECIALTY
1-59/64" BALL JOINT SOCKET
• Removes and installs the ball joints used on mid-size, rear-wheel
drive Chrysler cars — fits 1-59/64" ball joints
10213
2-9/64" BALL JOINT SOCKET

• Removes and installs the ball joints used on Chrysler/Dodge light
trucks and vans — fits 2-9/64" ball joints
10214
3/4" RATCHETING LOCKNUT TOOL

FOR FORD TRUCKS
• Small end fits Ford 1986 to 1994 light trucks with Dana 44 front
axle; large end fits 1985 and newer Ford F-150 and F-350 trucks
with Dana full floating rear axle — this flip socket allows for dual
application
10636
TRANSIT LOCK NUT TOOL

1/2" SQUARE DRIVE
• For Ford locknuts fitted on pre-1998 Ford Transit 80, 100, 115,
and 120 models with type 34 axles
10209
SAE METRIC
SUNEX TOOLS
SPECIALTY - IMPACT SOCKETS 97
4 LUG DRIVE PINION SHAFT

FLANGE NUT SOCKET
• Applicable for use on Mercedes Benz models 107, 114, 115, and 116
when removing the drive pinion shaft flange nut of the differential
10204
FOUR WHEEL DRIVE

SPINDLE NUT WRENCH
• Services 1988-95 Isuzu Trooper, Rodeo, Amigo, and pickups;
1985-89 Honda Passport; Jeep J20 pickups with Dana 60 Axle
10202
FOUR WHEEL DRIVE FRONT

SPINDLE PULLER
• For use when removing the front spindle on light duty 4WD trucks.
Applicable to full size Ford, GM, International, and Jeep pick-ups
with Dana front Axles; also applicable to Ford Ranger and Bronco II
- fits spindle thread sizes 2"-16, 1-5/8"-16, 38mm-1.5
10208
OXYGEN SENSOR SOCKET SET

• Easily removes vacuum switches, oil pressure sending units,
brake light switches, and oxygen sensors on most car models
2850 SET OF 7
MODEL SIZE
28501 29mm pressure/vacuum switch socket
28502 7/8" vacuum switch socket with 7.5mm gap
28503 27mm oil pressure sending unit socket
28504 7/8" vacuum switch socket with 20.6mm gap
28505 1-1/16" and 1" oil pressure sending unit socket
28506 7/8" short oxygen sensor socket
28507 7/8" hex, 1/2" double square driver
SUNEXTOOLS.COM
98 IMPACT SOCKETS - ADAPTERS, REDUCERS
SUPER REDUCER SET
2343
2303 1/2"F x 3/8"M 3303 3/8"F x 1/4"M
4305 3/4"F x 1/2"M
INDIVIDUAL EXTENSIONS
SIZE 3/8" 1/2" 3/4" 1" 1/2" WOBBLE 3/8" WOBBLE #5 SPLINE
SAE Model Model Model Model Model Model Model

3" 3503 2503 2503W 3503W
5" 3505 2505 2505W 3505W Square
6" 4302 5300
8" 5608
10" 3510 2510 4310 5310 2510W 3510W
13" 4313 5313
15" 3515 2515 2515W 3515W 5615 Wobble
24" 2524
36" 2536
36" for 2536T
Transmissions
1/2" (F) x 3/8" (M)
INDIVIDUAL ADAPTERS AND REDUCERS

SIZE ADAPTER REDUCER SIZE ADAPTER REDUCER
MODEL # MODEL # MODEL # MODEL #
3/8"(F) x 1/4"(M) 1805 3303 3/4"(F) x 1"(M) 4300
3/8"(F) x 1/2"(M) 3300 1"(F) x 3/4"(M) w/ ball ret. 5303 5305
1/4"(F) x 3/8"(M) 1801 1"(F) x 1-1/2"(M) w/ pin hole 5306
1/2"(F) x 3/8"(M) 2301 2303 1-1/2"(F) x 1"(M) w/ pin hole 6332
1/2"(F) x 3/4"(M) 2302 #5(F) x 3/4"(M) w/ ball ret. 5524
3/4"(F) x 1/2"(M) 4301 4305 #5(F) x 1"(M) w/ pin hole 5531
SAE METRIC
SUNEX TOOLS
Chrome..................................... Pg 103
Pliers ........................................ Pg 125
Bolt Cutters............................... Pg 131
Utility Knives ............................. Pg 132
Torque & Measuring.................. Pg 133
Screwdrivers ............................ Pg 135
Bit Sets ..................................... Pg 138
Picks, Hooks, Scrapers ............. Pg 141
Pry Bars.................................... Pg 145
Specialty................................... Pg 146
Wrenches ................................. Pg 150
With a Lifetime Warranty, Sunex Hand
Tools are warranted against defects
in materials and workmanship for
the life of the product. This includes
wrenches, screwdrivers, pliers, pry
bars, pullers, and drive tools.
HAND TOOLS
Whatever the job demands, you count on your tools to keep
up. Sunex Hand Tools are designed to work as hard as you,
and never back down from a job – no matter how tough.
Every hand tool we make is warranted against defects in
material and craftsmanship, so it’s guaranteed to do the job.
We even back most of our tools for life, and that’s no gamble
for us. We put every tool, every design, every material, and
every component through the ringer before we put it in your
toolbox. We trust our products as much as we expect you to.
So any time you reach for a screwdriver, wrench, bit or
socket set, pliers, pry bar or drive tool, you’ve got the Sunex
promise in the palm of your hand.
CHROME SOCKET SETS
BUILT TO LAST.
Things can get tough on the job, and you need tools that can take
the heat. Each and every Sunex Chrome Hand Tool is engineered
to perform and designed meet your most challenging workplace
demands. Guaranteed.
UNIQUE RATCHET DESIGN

Sunex signature 80-tooth
EASY IDENTIFICATION
ratchet is designed for optimal High-visibility markings
strength and accessibility. for easy identification on
the job. Color coded for
standard and metric.
RUST-RESISTANT, EASY CLEANING

Laser etched and stamped before the chrome
process, making the sockets more resistant to
abrasion and corrosion.
PROTECTIVE STORAGE INCLUDED

Rugged 2-piece reinforced carrying case
with stainless steel latches keeps tools
protected, and in order.
CHROME VANADIUM COMPOSITION

Made with Chrome Vanadium (Cr-V) alloy
steel, one of the industry's hardest, longest-
lasting steels.
CHROME HAND TOOLS - HAND
IMPACT TOOLS
SOCKETS 103
103
1/4" DRIVE CHROME SOCKET SET 1/4" & 3/8" DRIVE CHROME SOCKET SET
1436 SET OF 36 3830 SET OF 30
1/4" DRIVE
MODEL SIZE MODEL SIZE SIZE SIZE MODEL SIZE

19001C 3/16" 19001D 3/16" (DEEP) 19003C 1/4" 19005C 5/16"
19002C 7/32" 19002D 7/32" (DEEP) 19004C 9/32" 19006C 11/32"
1/4" DRIVE
19003C 1/4" 19003D 1/4" (DEEP)
SIZE SIZE MODEL SIZE
19004C 9/32" 19004D 9/32" (DEEP)
19104C 6mm 19106C 8mm
19005C 5/16" 19005D 5/16" (DEEP)
19105C 7mm 19107C 9mm
19006C 11/32" 19006D 11/32" (DEEP) 3/8" DRIVE
19007C 3/8" 19007D 3/8" (DEEP) SIZE SIZE MODEL SIZE

19008C 7/16" 19008D 7/16" (DEEP) 39007C 3/8" 39008C 7/16"
3/8" DRIVE
19009C 1/2" 19009D 1/2" (DEEP)
MODEL SIZE MODEL SIZE 39107C 10mm 39109C 12mm
19104C 6mm 19104D 6mm (DEEP) 39108C 11mm

3/8" DRIVE
19105C 7mm 19105D 7mm (DEEP) SIZE SIZE MODEL SIZE
19106C 8mm 19106D 8mm (DEEP) 38009D 1/2" 38012D 11/16"
19107C 9mm 19107D 9mm (DEEP) 38010D 9/16" 38013D 3/4"
19108C 10mm 19108D 10mm (DEEP) 38011D 5/8"
19109C 11mm 19109D 11mm (DEEP) 3/8" DRIVE
19110C 12mm 19110D 12mm (DEEP)
3911SP 5/8" 38113C 16mm
Includes: 1/4" Drive Universal Joint (1819UJ), 1/4 Drive 3" Extension
3914SP 13/16" 38114C 17mm
(19203NLE), 1/4 Drive 6" Extension (19206NLE), 1/4" Drive 80 Tooth
Low Profile Ratchet (10080) 38110C 13mm 38115C 18mm
38111C 14mm 38116C 19mm
38112C 15mm
Includes: 3/8" to 1/4" Reducer (3814RR), 3/8" Drive 3" Extension

(39203NLE), 3/8" 80 Tooth Low Profile Ratchet (30080)
SUNEXTOOLS.COM
104
104 HAND TOOLS
IMPACT - CHROME HAND TOOLS
SOCKETS
CHROME SOCKET SET
3842 SET OF 42

39007C 3/8" 39007D 3/8" (DEEP)
39009C 1/2" 39008D 7/16" (DEEP)
39010C 9/16" 39009D 1/2" (DEEP)
39011C 5/8" 39010D 9/16" (DEEP)
39012C 11/16" 39011D 5/8" (DEEP)
39013C 3/4" 39012D 11/16" (DEEP)
39014C 13/16" 39013D 3/4" (DEEP)
39015C 7/8" 39014D 13/16" (DEEP)

39107C 10mm 39107D 10mm (DEEP)
39108C 11mm 39108D 11mm (DEEP)
39109C 12mm 39109D 12mm (DEEP)
39110C 13mm 39110D 13mm (DEEP)
39111C 14mm 39111D 14mm (DEEP)
39112C 15mm 39112D 15mm (DEEP)
39113C 16mm 39113D 16mm (DEEP)
39114C 17mm 39114D 17mm (DEEP)
39115C 18mm 39115D 18mm (DEEP)
39116C 19mm 39116D 19mm (DEEP)
Includes: 5/8" (3911SP) & 13/16" (3914SP) Deep Spark Plug Sockets, 3/8"
Drive Universal Joint (3839UJ), 3/8 Drive 3" Extension (39203NLE), 3/8 Drive
6" Extension (39206NLE), 3/8" 80 Tooth Low Profile Ratchet (30080)
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 105
105
1/4" & 3/8" DRIVE SAE & METRIC

MASTER CHROME SOCKET SET
3879 SET OF 79
1/4" DRIVE

1901C 5/32" 19003D 1/4" (DEEP)
19001C 3/16" 19004D 9/32" (DEEP)
19002C 7/32" 19005D 5/16" (DEEP)
19003C 1/4" 19006D 11/32" (DEEP)
19004C 9/32" 19007D 3/8" (DEEP)
19005C 5/16" 17003C 1/4" (DEEP)
19006C 11/32" 17005C 5/16" (DEEP)
19007C 3/8" 17007C 3/8" (DEEP)
19008C 7/16"
19009C 1/2"
19010C 9/16"
1/4" DRIVE
19101C 4mm 19104D 6mm (DEEP)
19102C 5mm 19105D 7mm (DEEP)
19105C 7mm 19106D 8mm (DEEP)
19106C 8mm 19107D 9mm (DEEP)
19107C 9mm 19108D 10mm (DEEP)
19108C 10mm 19109D 11mm (DEEP)
19109C 11mm 19110D 12mm (DEEP)
19110C 12mm 19111D 13mm (DEEP)
19111C 13mm
3/8" DRIVE
39003C 1/4" 39010C 9/16"
39005C 5/16" 39011C 5/8"
39007C 3/8" 39012C 11/16"
39008C 7/16" 39013C 3/4"
39009C 1/2" 39014C 13/16"
3/8" DRIVE
39106C 9mm 39111C 14mm
39107C 10mm 39112C 15mm
39108C 11mm 39113C 16mm
39109C 12mm 39114C 17mm
39110C 13mm 39116C 19mm

39108D 11mm (DEEP) 39007D 3/8" (DEEP)
39109D 12mm (DEEP) 39008D 7/16" (DEEP)
39110D 13mm (DEEP) 39009D 1/2" (DEEP)
39111D 14mm (DEEP)
Includes: 12 Point Socket: 1/4" (38003C), 5/16" (38011C), 11/16" (38012C), 3/4"
(38013C), Deep Spark Plug Socket - 5/8", 3/8" Dr. Low Profile Ratchet (30080),
1/4" Dr. 3" Extension (19203NLE), 3/8 Dr. 3" Extension (39203NLE), 3/8" Dr. 6"
Extension (39206NLE), 1/4 Dr. Low Profile Ratchet (10080)
SUNEXTOOLS.COM
106
106 HAND TOOLS
SOCKETS
1/4", 3/8" & 1/2" DRIVE SAE & METRIC
MASTER CHROME SOCKET SET
1889 SET OF 89
1/4" DRIVE
19001C 5/32" 19004D 9/32" (DEEP)
19001C 9/16" 19005D 5/16" (DEEP)
19002C 7/32" 18001C 3/16"
19003C 1/4" 18002C 7/32"
19004C 9/32" 18003C 1/4"
19005C 5/16" 18004C 9/32"
19006C 11/32" 18005C 5/16"
19007C 3/8" 18006C 11/32"
19008C 7/16" 18007C 3/8"
19009C 1/2" 18008C 7/16"
19001D 3/16" (DEEP) 18009C 1/2"
19003D 1/4" (DEEP)
3/8" DRIVE
28009C 1/2" 28013C 3/4"
28010C 9/16" 28014C 13/16"
28011C 5/8" 28015C 7/8"
28012C 11/16"
1/2" DRIVE
39007D 3/8" (DEEP) 38008C 7/16"
1/4" DRIVE
39008D 7/16" (DEEP) 38009C 1/2"
39009D 1/2" (DEEP) 38010C 9/16"
19101C 4mm 19106C 8mm
39010D 9/16" (DEEP) 38011C 5/8"
1910C 4.5mm 19107C 9mm
38007C 3/8" 38012C 11/16"
19102C 5mm 19108C 10mm
38008C 7/16" 38013C 3/4"
19103C 5.5mm 19109C 11mm
38009C 1/2" 38014C 13/16"
19104C 6mm 19110C 12mm
38010C 9/16" 39007C 3/8"
19105C 7mm 19111C 13mm
38011C 5/8" 39008C 1/2" 1/2" DRIVE
38012C 11/16" 39010C 9/16" MODEL SIZE MODEL SIZE

38013C 3/4" 39011C 5/8" 39106C 9mm 39111C 14mm
38014C 13/16" 39012C 11/16" 39107C 10mm 39112C 15mm
39009D 1/2" (DEEP) 39013C 3/4" 39108C 11mm 39114C 17mm
39010D 9/16" (DEEP) 39014C 13/16" 39109C 12mm 39116C 19mm
38007C 3/8" 39110C 13mm
Includes: 5/8" (2911SP) & 13/16" (2914SP) Deep Spark Plug Sockets,
1/4" Dr. 3" Extension (1920NLE), 3/8" Dr. 3" Extension (39203NLE),
1/2" Dr. 5" Extension (29205NLE), 1/4" 80 Tooth Low Profiles Ratchet
(10080), 3/8" 80 Tooth Low Profile Ratchet (30080), 1/2" 80 Tooth Low
Profile Ratchet (20080)
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 107
107
3/4" DRIVE SAE CHROME SOCKET SET

• Strong 24 tooth gear design withstands high torque applications
• Rugged metal case with latches to keep tools organized
• Lifetime warranty
4421 SET OF 21

49016C 15/16” 49024C 1-7/16”
49017C 1” 49025C 1-1/2”
49018C 1-16” 49027C 1-5/8"
49019C 1-18” 49028C 1-11/16”
49020C 1-3/16” 49029C 1-3/4”
49021C 1-1/4” 49030C 1-13/16”
49022C 1-5/16” 49031C 1-7/8”
49023C 1-3/8” 49032C 2”
Includes: 24 Tooth Ratchet (40024), 18” Sliding T-Bar (49T18),

4” Extension (4920NLE), 8” Extension (49208NLE), 16” Extension
(40216NLE)

19000C SET OF 10

19001C 3/16" 19006C 11/32"
19002C 7/32" 19007C 3/8"
19003C 1/4" 19008C 7/16"
19004C 9/32" 19009C 1/2"
19005C 5/16" 19010C 9/16"
1/4" DRIVE METRIC CHROME SOCKET SET

19100C SET OF 13

19101C 4mm 19108C 10mm
19102C 5mm 19109C 11mm
19103C 5.5mm 19110C 12mm
19104C 6mm 19111C 13mm
19105C 7mm 19112C 14mm
19106C 8mm 19113C 15mm
19107C 9mm
SUNEXTOOLS.COM
108
108 HAND TOOLS
SOCKETS
1/4" DRIVE SAE 12 POINT
CHROME SOCKET SET
18000C SET OF 10

18001C 3/16" 18006C 11/32"
18002C 7/32" 18007C 3/8"
18003C 1/4" 18008C 7/16"
18004C 9/32" 18009C 1/2"
18005C 5/16" 18010C 9/16"
1/4" DRIVE METRIC 12 POINT

CHROME SOCKET SET
18100C SET OF 13

18101C 4mm 18108C 10mm
18102C 5mm 18109C 11mm
18103C 5.5mm 18110C 12mm
18104C 6mm 18111C 13mm
18105C 7mm 18112C 14mm
18106C 8mm 18113C 15mm
18107C 9mm

39001C SET OF 13

39003C 1/4" 39012C 11/16"
39005C 5/16" 39013C 3/4"
39007C 3/8" 39014C 13/16"
39008C 7/16" 39015C 7/8"
39009C 1/2" 39016C 15/16"
39010C 9/16" 39017C 1"
39011C 5/8"
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 109
109

39101C SET OF 13

39104C 7mm 39111C 14mm
39105C 8mm 39112C 15mm
39106C 9mm 39113C 16mm
39107C 10mm 39114C 17mm
39108C 11mm 39115C 18mm
39109C 12mm 39116C 19mm
39110C 13mm

CHROME SOCKET SET
38001C SET OF 13

38003C 1/4" 38012C 11/16"
38005C 5/16" 38013C 3/4"
38007C 3/8" 38014C 13/16"
38008C 7/16" 38015C 7/8"
38009C 1/2" 38016C 15/16"
38010C 9/16" 38017C 1"
38011C 5/8"
3/8" DRIVE METRIC 12 POINT

CHROME SOCKET SET
38101C SET OF 13

38104C 7mm 38111C 14mm
38105C 8mm 38112C 15mm
38106C 9mm 38113C 16mm
38107C 10mm 38114C 17mm
38108C 11mm 38115C 18mm
38109C 12mm 38116C 19mm
38110C 13mm
SUNEXTOOLS.COM
110
110 HAND TOOLS
SOCKETS
3/8" DRIVE SAE DEEP
CHROME SOCKET SET
39001D SET OF 13

39003D 1/4" 39012D 11/16"
39005D 5/16" 39013D 3/4"
39007D 3/8" 39014D 13/16"
39008D 7/16" 39015D 7/8"
39009D 1/2" 39016D 15/16"
39010D 9/16" 39017D 1"
39011D 5/8"

CHROME SOCKET SET
39101D SET OF 13

39104C 7mm 39111C 14mm
39105C 8mm 39112C 15mm
39106C 9mm 39113C 16mm
39107C 10mm 39114C 17mm
39108C 11mm 39115C 18mm
39109C 12mm 39116C 19mm
39110C 13mm
3/8" DRIVE SAE 12 POINT DEEP

CHROME SOCKET SET
38001D SET OF 13

38003D 1/4" 38012D 11/16"
38005D 5/16" 38013D 3/4"
38007D 3/8" 38014D 13/16"
38008D 7/16" 38015D 7/8"
38009D 1/2" 38016D 15/16"
38010D 9/16" 38017D 1"
38011D 5/8"
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 111
111

CHROME SOCKET SET
38101D SET OF 13

38104D 7mm 38111D 14mm
38105D 8mm 38112D 15mm
38106D 9mm 38113D 16mm
38107D 10mm 38114D 17mm
38108D 11mm 38115D 18mm
38109D 12mm 38116D 19mm
38110D 13mm

29002C SET OF 13

29008C 7/16" 29015C 7/8"
29009C 1/2" 29016C 15/16"
29010C 9/16" 29017C 1"
29011C 5/8" 29018C 1-1/16"
29012C 11/16" 29019C 1-1/8"
29013C 3/4" 29020C 1-1/4"
29014C 13/16"

29102C SET OF 13

29109C 12mm 29116C 19mm
29110C 13mm 29117C 20mm
29111C 14mm 29118C 21mm
29112C 15mm 29119C 22mm
29113C 16mm 29120C 23mm
29114C 17mm 29121C 24mm
29115C 18mm
SUNEXTOOLS.COM
112
112 HAND TOOLS
SOCKETS
CHROME SOCKET SET
28002C SET OF 13

28008C 7/16" 28015C 7/8"
28009C 1/2" 28016C 15/16"
28010C 9/16" 28017C 1"
28011C 5/8" 28018C 1-1/16"
28012C 11/16" 28019C 1-1/8"
28013C 3/4" 28020C 1-1/4"
28014C 13/16"
1/2" DRIVE SAE DEEP CHROME SOCKET SET

29002D SET OF 13

29008D 7/16" 29015D 7/8"
29009D 1/2" 29016D 15/16"
29010D 9/16" 29017D 1"
29011D 5/8" 29018D 1-1/16"
29012D 11/16" 29019D 1-1/8"
29013D 3/4" 29020D 1-1/4"
29014D 13/16"

CHROME SOCKET SET
29102D SET OF 13

29109D 12mm 29116D 19mm
29110D 13mm 29117D 20mm
29111D 14mm 29118D 21mm
29112D 15mm 29119D 22mm
29113D 16mm 29120D 23mm
29114D 17mm 29121D 24mm
29115D 18mm
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 113
113
1/2" DRIVE SAE 12 POINT DEEP

CHROME SOCKET SET
28002D SET OF 13

28008D 7/16" 28015D 7/8"
28009D 1/2" 28016D 15/16"
28010D 9/16" 28017D 1"
28011D 5/8" 28018D 1-1/16"
28012D 11/16" 28019D 1-1/8"
28013D 3/4" 28020D 1-1/4"
28014D 13/16"

CHROME SOCKET SET
28102D SET OF 13

28109D 12mm 28116D 19mm
28110D 13mm 28117D 20mm
28111D 14mm 28118D 21mm
28112D 15mm 28119D 22mm
28113D 16mm 28120D 23mm
28114D 17mm 28121D 24mm
28115D 18mm
1/4" DRIVE 80 TOOTH RATCHET

• Patented teardrop handle ensures comfortable ergonomic grip
• Unique 80 tooth ratchet for optimal strength and accessibility
10080
SUNEXTOOLS.COM
114
114 HAND TOOLS
SOCKETS
30080

20080
1/4" DRIVE STANDARD CHROME

EXTENSION BAR SET
19200NLE SET OF 5
MODEL LENGTH TYPE / APPLICATION
19202NLE 2 2" Extension

EXTENSION BAR SET
39201NLE SET OF 5
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 115
115

EXTENSION BAR SET
29202NLE
1/4" DRIVE UNIVERSAL SAE 6PT RAIL

• Universal joint provides access to fasteners in confined spaces
19000U SET OF 7

19001U 3/16" 19008U 7/16"
19003U 1/4" 19009U 1/2"
19005U 5/16" 19010U 9/16"
19007U 3/8"
1/4" DRIVE UNIVERSAL METRIC 6PT RAIL

19100U SET OF 12

19101U 5mm 19107U 10mm
19102U 5.5mm 19108U 11mm
19103U 6mm 19109U 12mm
19104U 7mm 19110U 13mm
19105U 8mm 19111U 14mm
19106U 9mm 19112U 15mm
3/8" DRIVE UNIVERSAL SAE 6PT RAIL

39001U SET OF 7

39007U 3/8" 39011U 5/8"
39008U 7/16" 39012U 11/16"
39009U 1/2" 39013U 3/4"
39010U 9/16"
SUNEXTOOLS.COM
116
116 HAND TOOLS
SOCKETS
3/8" DRIVE UNIVERSAL METRIC 6PT RAIL
39101U SET OF 10

39107U 10mm 39112U 15mm
39108U 11mm 39113U 16mm
39109U 12mm 39114U 17mm
39110U 13mm 39115U 18mm
39111U 14mm 39116U 19mm
1/4" DRIVE WOBBLE EXTENSION BAR SET

• Tapered square provides a wobble feature that allows for 16 degree
of additional accessability
19200WE SET OF 5
19202WE 2” Extension 19210WE 10" Extension
19203WE 3" Extension 19214WE 14" Extension
19206WE 6" Extension

39201WE SET OF 5
39210WE 10" Extension

29202WE SET OF 4
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 117
117
1/4" DRIVE CHROME LOCK

EXTENSION SET
• Ball detent and locking sleeve ensures socket stays attached
during application
19200LE SET OF 5
19202LE 2" Extension 19210LE 10" Extension
19206LE 6" Extension
3/8" DRIVE LOCK BAR EXTENSION SET

during application
39201LE SET OF 5
39210LE 10" Extension
1/2" DRIVE LOCK BAR EXTENSION SET

during application
29202LE SET OF 4
1/4", 3/8" & 1/2" DRIVE CHROME

MAGNETIC UNIVERSAL EXTENSION
ADAPTER SET
132MM SET OF 9
1/4" DRIVE 3/8" DRIVE
1438MA 1/4" - 3/8" Adapter 3812MA 3/8" - 1/2" Adapter
1819MUJ 1/4" Dr. Univ. Joint 3814MA 3/8" - 1/4" Adapter
19206ME 1/4" Dr. 6" Adapter 3839MUJ 3/8" Dr. Univ. Joint
1/2" DRIVE 39206ME 3/8" Dr. 6" Adapter
2829MUJ 1/2" Dr. Univ. Joint
29206ME 1/2" Dr. 6" Adapter
SUNEXTOOLS.COM
118
118 HAND TOOLS
SOCKETS
1/4", 3/8" & 1/2" DRIVE CHROME
MAGNETIC UNIVERSAL JOINT SET
132MUJ SET OF 3
1819MUJ 1/4" Dr. Univ. Joint 3839MUJ 3/8" Dr. Univ. Joint
2829MUJ 1/2" Dr. Univ. Joint
1/4", 3/8" & 1/2" DRIVE CHROME

MAGNETIC ADAPTER SET
133MA SET OF 3
SIZE
1/4" - 3/8" Chrome Magnetic Adapter
3/8" - 1/2" Chrome Magnetic Adapter
3/8"- 1/4" Chrome Magnetic Adapter
1/4", 3/8" & 1/2" DRIVE CHROME

6" MAGNETIC EXTENSION SET
132ME SET OF 3
19206ME 1/4" Dr. 6" Extension 39206ME 3/8" Dr. 6" Extension
1/2" DRIVE
29206ME 1/2" Dr. 6" Extension
1/4", 3/8" & 1/2" STAR BIT SOCKET SET

• Chrome sockets to reduce rust and corrosion
• Bits are finished with zinc phosphate to protect against corrosion
• Aluminum anodized rails for easy transportation and storage
912313S SET OF 13
18S T8 340S T40

110S T10 345S T45
1115S T15 347S T47
120S T20 350S T50
125S T25 355S T55
127S T27 1/2" DRIVE
260S T60
130S T30
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 119
119
1/4", 3/8" & 1/2" DRIVE LONG

STAR BIT SOCKET SET
912313SL SET OF 13
18SL 1/4" Dr. T8 340Sl 3/8" Dr. T40
110SL 1/4" Dr. T10 345SL 3/8" Dr. T45
115SL 1/4" Dr. T15 347SL 3/8" Dr. T47
120SL 1/4" Dr. T20 350SL 3/8" Dr. T50
125SL 1/4" Dr. T25 355SL 3/8" Dr. T55
127SL 1/4" Dr. T27 1/2" DRIVE
260SL 1/2" Dr. T60
130SL 1/4" Dr. T30
1/4", 3/8" & 1/2" DRIVE INVERTED

STAR SOCKET SET
912311E SET OF 11
1/4" DRIVE
312E 3/8" Dr. E12
14E 1/4" Dr. E4
314E 3/8" Dr. E14
15E 1/4" Dr. E5
316E 3/8" Dr. E16
16E 1/4" Dr. E6 1/2" DRIVE
17E 1/4" Dr. E7 218E 1/2" Dr. E18

18E 1/4" Dr. E8 220E 1/2" Dr. E20
3/8" DRIVE
310E 3/8" Dr. E10
SUNEXTOOLS.COM
120
120 HAND TOOLS
SOCKETS
1/4" & 3/8" DRIVE TAMPERPROOF
STAR BIT SOCKET SET
91311TP SET OF 11
18TP T8H 330TP T30H

110TP T10H 340TP T40H
115TP T15H 345TP T45H
120TP T20H 350TP T50H
125TP T25 355TP T55H
127TP T27
3/8" DRIVE TRIPLE SQUARE BIT

SOCKET SET
938TS SET OF 8
34TS M4 310TS M10
35TS M5 312TS M12
36TS M6 314TS M14
38TS M8 316TS M16
3/8" & 1/2" DRIVE LONG TRIPLE

SQUARE BIT SOCKET SET
9238TSL SET OF 8
3/8" DRIVE
310TSL M10
34TSL M4 1/2" DRIVE
35TSL M5 212TSL M12

36TSL M6 214TSL M14
38TSL M8 216TSL M16
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 121
121
1/4" & 3/8" DRIVE STUBBY METRIC

HEX BIT SOCKET SET
9138HSM SET OF 8

13HSM 3mm 37HSM 7mm
14HSM 4mm 38HSM 8mm
15HSM 5mm 39HSM 9mm
16HSM 6mm 310HSM 10mm
1/4" & 3/8" DRIVE STUBBY SAE

HEX BIT SOCKET SET
9138HS SET OF 8

13HS 1/8" 37HS 7/32"

14HS 9/64" 38HS 1/4"
15HS 5/32" 39HS 5/16"
16HS 3/16" 310HS 3/8"
3/8" DRIVE STUBBY METRIC

HEX BIT SOCKET SET
937HM SET OF 7

34HM 4mm 38HM 8mm
35HM 5mm 39HM 9mm
36HM 6mm 310HM 10mm
37HM 7mm
SUNEXTOOLS.COM
122
122 HAND TOOLS
SOCKETS
3/8" SAE HEX BIT SOCKET SET
938H SET OF 8

33H 1/8" 37H 7/32"
34H 9/64" 38H 1/4"
35H 5/32" 39H 5/16"
36H 3/16" 310H 3/8"
3/8" LONG METRIC HEX BIT

SOCKET SET
936HLM SET OF 6

34HLM 4mm 37HLM 7mm
35HLM 5mm 38HLM 8mm
36HLM 6mm 310HLM 10mm
3/8" LONG SAE HEX BIT SOCKET SET

936HL SET OF 6

35HL 5/32" 38HL 1/4"
36HL 3/16" 39HL 5/16"
37HL 7/32" 310HL 3/8"
SAE METRIC
SUNEX TOOLS
IMPACT TOOLS
SOCKETS 123
123
3/8" DRIVE UNIVERSAL SPARK PLUG

SOCKET SET
8844 SET OF 4

8844-9/16 9/16" 8844-3/4 3/4"
8844-5/8 5/8" 8844-13/16 13/16"
3/8" DRIVE MASTER SPARK PLUG SOCKET SET

• For easy removal and installation of spark plug sizes common in most vehicles. The spark
plug socket is a standard deep socket with a small rubber buffer inside of it, intended to
grab onto the terminal and hold the plug inside of the socket while it is maneuvered into position
• Includes three extra deep spark plugs sockets and one thin wall spark plug socket for hard
to reach plugs - for use with 3/8" drive ratchets
8845 SET OF 8

884501 2-1/2" 9/16" Spark Plug Socket - Various foreign and domestic models
884505 6" 9/16" Extra Deep Spark Plug Socket - Various foreign and domestic models
884506 6" 5/8" Extra Deep Spark Plug Socket - Various foreign and domestic models
3/8" DRIVE INDIVIDUAL 884507 6" 13/16" Extra Deep Spark Plug Socket - Various foreign and domestic models
SPARK PLUG SOCKETS 884504 2-1/2" 16mm Thin Wall Spark Plug Socket - Honda/Acura and Toyota
3/8" DR. 3 PC. UNIVERSAL JOINT

GLOW PLUG SET
• One piece extended universal socket keeps the tool together
during use
• Built-in hex pin holds glow plug in socket
• Optimal pivoting angle is ideal for hard to reach places
3303GP SET OF 3

330308 8mm 330312 12mm
330310 10mm
SUNEXTOOLS.COM
124
124 HAND TOOLS
SOCKETS
3/8" DRIVE DRAIN PLUG KEY SET
• Socket set designed for both foreign and domestic vehicles
• Sliding T-handle provides leverage and reach in tough-to-access areas
8846 SET OF 19
HEX
884601 8mm 884604 12mm
884602 9mm 884605 14mm
884603 10mm 884606 17mm
SQUARE
884608 7mm 884612 5/16"
884609 8mm 884613 3/8"
884610 11mm
884611 13mm
INSERT SQUARE TRIANGLE
884607 10mm 884614 10mm
SLIDING T-BAR
884615 3/8" Drive
WARNING: Use of these sockets with an impact tool can cause serious injury.
ANTENNA AND MIRROR NUT SOCKET SET

• 1/4", 3/8" & 1/2" drive 8 piece antenna and mirror maintenance socket set Mercedes, BMW,
VW, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover
3921 SET OF 8
MODEL # TYPE
Remote Control Mirror Socket (Two-Prong)
392101
Hollow socket clears adjustment lever - 3/8" sq. dr. - services many Ford and VW vehicles
Radio Trim Nut Socket (Two-Prong)
392102
Hollow socket clears adjustment lever - 1/4" sq. dr. - services some GM and Ford cars
Antenna Nut Socket (Three-Prong)
392103
11/16" external hex, 1-1/2" long - services 1987 - current Chrysler vehicles
Antenna Nut Socket (Two-Prong)
392104 11/16" external hex - services 1989-90 Ford Probe, 1989-90 Mazda RX7,
and 926 Nissan Stanza and Maxima
Antenna Nut Socket (Four-Prong)
392105
11/16" external hex-services 1985-90 Ford Taurus and Mercury Sable, 1990 Lincoln Mark V
Power Antenna Nut Socket (Four-Prong)
392106
11/16" external hex, 44.5mm long - services 1977-current GM vehicles
Antenna Nut Socket (Four-Prong)
392107 11/16" external hex - services GMC 400 Pickups C and K, 1989 Lincoln Town Car and 1/4", 3/8" & 1/2"
Continental, 1990 Toyota Camry and Celica, Chrysler, Mitsubishi Eclipse, Galant, and Sigma
DRIVE INDIVIDUAL
Ball Joint Socket (Four-Prong)
392108
1/2" sq. dr. - for use on 4-5 B axles such as found on Dodge, Ford, Chevrolet, GMC, ANTENNA & MIRROR
and international four wheel drive trucks - adjusts the sleeve in the top of the yoke
on the front suspension
MAINTENANCE SOCKETS
SAE METRIC
SUNEX TOOLS
CHROME / PLIERS - HAND
IMPACT TOOLS
SOCKETS 125
125
TPMS SENSOR FLIP SOCKET SET

• For use in installation and removal of TPMS sensors
• Includes Chrome-Vanadium 11mm x 12mm flip socket
and 2" extension
• Also available separately
1819C SET OF 4
11mm x 12mm
1819CS 1819CE 2" Extension
Flip Socket
3/8" DRIVE WEATHERHEAD SOCKET

MASTER SET
• Used to remove or install Weatherhead fittings
• Used in 90˚ elbow joint applications
• Ideal for hydraulic hose and fitting removal and installations
9913 SET OF 13
991301 7/16" 991308 11/16"
991302 15/32" 991309 23/32"
991303 1/2" 991310 3/4"
991304 17/32" 991311 25/32"
991305 9/16" 991314 27/32"
991306 19/32" 991315 29/32"
991307 5/8"
MULTIPURPOSE PLIER SET

3606V SET OF 3
MODEL SIZE
360601V 7" High Leverage Diagonal Cutting Pliers
360602V 8" Long Nose Pliers
360603V 10" Box Joint Water Pump Pliers
Includes: Roll Pouch
SUNEXTOOLS.COM
126
126 HAND TOOLS
IMPACT - PLIERS
SOCKETS
HIGH LEVERAGE PLIER SET
3605V SET OF 3
MODEL SIZE
360502V 8" High Leveral Diagonal Cutting, Bent Jaw
360503V 9.5" High Leverage Lineman's Pliers, Crosshatched Teeth

3609V SET OF 4
MODEL SIZE
360901V 8" Slip Joint Pliers
360902V 10" Tongue & Groove Joint Pliers, Curved Jaw

3607V SET OF 5
MODEL SIZE
360702V 10" Cable Cutting Pliers
360703V 9.5" Professional Crimper
360704V 9.5" High Leverage Lineman's Pliers with Crimper

3610V SET OF 5
MODEL SIZE
361002V 8" Lineman's Pliers
361003V 8" Slip Joint Pliers, Bent Jaw
361004V 8" Bent Jaw Cutting Pliers
361103V 12" Tongue & Groove Joint Pliers, Straight Jaw
SAE METRIC
SUNEX TOOLS
PLIERS - HAND
IMPACT TOOLS
SOCKETS 127
127
11" LONG REACH PLIER SET

3600V SET OF 4
MODEL SIZE
3610V 90 Degree Bent Nose
3602V 45 Degree Bent Nose
3603V Straight Nose
3604V 20 Offset Nose
11" HOSE GRIPPER PLIER SET

3703V SET OF 3
MODEL SIZE
3707V 11" Long Reach Hose Gripper 5/16"

3704V SET OF 3
MODEL SIZE
3710V 11" Heavy Duty Cutting Pliers
3711V 11" Heavy Duty Hose Gripper 1/2"
3712V 11" Heavy Duty Hose Gripper 3/4"

3706V SET OF 4
MODEL SIZE
3716V 16" Long Reach Pliers, 90 Bent Nose
3717V 16" Long Reach Pliers, 45 Bent Nose
3718V 16" Long Reach Pliers, Straight Nose
3719V 16" Long Reach Pliers, 20 Degree Offset Nose
SUNEXTOOLS.COM
128
128 HAND TOOLS
IMPACT - PLIERS
SOCKETS
COMPOUND JOINT PLIER SET
3608V SET OF 3
MODEL SIZE
360801V Long Reach Compound Joint Pliers, Long Nose
360802V Long Reach Compound Joint Pliers, Bent Nose 45 Degree
360803V Long Reach Compound Joint Pliers, Duck Bill
AVIATION SNIP SET

3617V SET OF 3
MODEL SIZE
361701 10" Aviation Snip, Left
361702 10" Aviation Snip, Straight
361703 10" Aviation Snip, Right
PRECISION PLIER SET

3612V SET OF 10
MODEL SIZE
361201V 4.5" Mini Combination Pliers
361202V 4.5" Mini Flat Nose Pliers, Narrow Jaw
361203V 4.5" Mini Diagonal Cutting Pliers, Narrow Jaw
361204V 4.5" Mini End Cutting Pliers
361205V 4.5" Mini Bent Nose Pliers
361206V 6" Mini Needle Nose Pliers
361207V 6" Mini Long Nose Pliers, With Cutting
361208V 5.5" Mini Long Diagonal Cutting Pliers
361209V 6" Mini Duck Bill
361210V 7" Mini Needle Nose Pliers, 22 Degree Bent
TONGUE & GROOVE JOINT PLIER SET

3611V SET OF 3
MODEL SIZE
361101V 8" Tongue & Groove Joint Pliers
SUNEX TOOLS
PLIERS - HAND
IMPACT TOOLS
SOCKETS 129
129
SLIP JOINT WATER PUMP PLIERS

3621V SET OF 3
MODEL SIZE
362101V Water Pump Pliers 7", Push-on Grips
362102V Water Pump Pliers 10", Push-on Grips
362103V Water Pump Pliers 12" Push-on Grips
PUSH BUTTON WATER PUMP PLIERS

3622V SET OF 3
MODEL SIZE
362201V Cobra Water Pump Pliers 7" Push Button
362202V Cobra Water Pump Pliers 10", Push Button
362203V Cobra Water Pump Pliers 12", Push Button
PUSH BUTTON WATER PUMP PLIER

3623V - 16" LONG
SNAP RING PLIER SET

3614V SET OF 4
MODEL SIZE
361401V 7" Internal Use Straight Nose
361402V 7" Internal Use Bent Nose
361403V 7" External Use Straight Nose
361404V 7" External Use Bent Nose
SUNEXTOOLS.COM
130
130 HAND TOOLS
IMPACT - PLIERS
SOCKETS
12" OIL FILTER PLIER ANGLED JAW
• 12" Angled oil filter pliers
• Angled jaw adjusts from 2-1/2" to 4-1/2"
• Two-position slip joint design to quickly adjust to size
3624
13" OIL FILTER PLIER ADJUSTABLE JAW

• 13" Adjustable oil filter pliers
• Jaw adjusts from 2-1/4" to 4-3/4"
• Easily adjust jaw for better grip in difficult spaces
3625
FLEXIBLE HOSE CLAMP PLIERS

3720
10" AUTOMATIC WIRE STRIPPER

AND CRIMPER
• 3 in 1 wire stripping tool with crimping and cutting capabilities
• Non-slip, comfort grip handles for user comfort
3619
STRAIGHT TIP MULTI-FUNCTIONAL

WIRE STRIPPER/CUTTER PLIERS
• Serrated long nose design provides a better grip when pulling
and lopping wire
3620
SUNEX TOOLS
PLIERS / BOLT CUTTERS - HAND
IMPACT TOOLS
SOCKETS 131
131
PISTOL GRIP MULTI-FUNCTIONAL

• Pistol style grip for added comfort while working in tight and difficult areas
3621
ANGLED TIP MULTI-FUNCTIONAL

• Offset needle nose design provides better leverage when pulling wires
3622
6" WIRE STRIPPER

• Spring assisted jaw opening
• Strips 0.8 to 2.6 wire
3618
14" STEEL BOLT CUTTER

• Adjustable CR-MO steel jaws cut rods, bolts, rivets, bar and chain
• Hardened cutting edge (60 HRC) increases cutting performance
and durability
• Compound cutting action requires less effort
• Tubular steel handles with cushioned non-slip rubber grips allows
maximum leverage
3014BC

and durability
maximum leverage
3018BC

and durability
maximum leverage
3024BC
SUNEXTOOLS.COM
132
132 HAND TOOLS
IMPACT - UTILITY KNIVES
SOCKETS
SAFETY UTILITY KNIFE
• Pressure retracting blade retracts when it loses contact
• Spring loaded blade slide
• Integrated cutter for wire stripping
• Lanyard hole for storage and transport
SKS1
RETRACTABLE UTILITY KNIFE

• Ergonomic handle design for a stronger and more comfortable grip
• 4 position slide for different levels of blade length
• Blade storage inside the handle
• Comes with 3 blades
SKR1
RETRACTABLE UTILITY KNIFE W/

QUICK CHANGE BLADE
• Quick release button to safely and quickly remove blades
• 4 position slide for different levels of blade length
• Blade storage inside the handle
SKR2
9MM SNAP OFF UTILITY KNIFE

• Blade breaks away cleanly for 13 different cutting points
• Metal blade guide for durability
• Auto eject and reload blades stored in the handle with one hand
SKB1
18MM SNAP OFF UTILITY KNIFE

• Blade breaks away cleanly for 8 different cutting points
• Metal blade guide for durability
• Auto eject and reload blades stored in the handle with one hand
SKB2
FOLDING UTILITY KNIFE

• Folding design for better storage
• Belt clip for portability
• Quick release button to safely and quickly remove blades
SKF1
SUNEX TOOLS
TORQUE & MEASURING - HAND
IMPACT TOOLS
SOCKETS 133
133
1/4" DRIVE 10-50 IN-LB 60T

TORQUE WRENCH
• 60 tooth ratcheting mechanism
• Accurate to CW/CCW ±6%
• Desired torque is signaled by audible click and impulse
• Heat treated tube with knurled aluminum handle for a better grip
• High-contrast dual-range scale is easy to read, even in low light
11050
Includes: Durable case with latches for safe storage
1/2" DRIVE 30-250 FT-LB 48T

TORQUE WRENCH
• Accurate to ±3% clockwise and ±6% counterclockwise
• High quality internal components for professional performance
20250
3/8" DRIVE 10-80 FT-LB 48T

TORQUE WRENCH
31080
3/8" DRIVE 50-250 IN-LB 48T

TORQUE WRENCH
30250
SUNEXTOOLS.COM
134
134 HAND TOOLS
IMPACT - TORQUE & MEASURING
SOCKETS
3/4" DRIVE 110-600 FT-LBS.
48T TORQUE WRENCH
40600
CIRCUIT TESTER
• Full-size, comfortable acetate handle lights when circuit is good
• Lead remains flexible in low temperatures
4001
MODEL SIZE
612 Voltage Range (V)
Replacement bulb & spring - RS4003
SAE HEX KEY SET

9859 Set of 8
MODEL SIZE
985910 Hex Key, T-Handle, Hex, 5/32"
METRIC HEX KEY SET

9858M SET OF 8
MODEL SIZE
9858M10 Hex Key, T-Handle, Hex, 10 mm
9858M2-5 Hex Key, T-Handle, Hex, 2.5 mm
98598 Hex Key, T-Handle, Hex, 1/8” SAE METRIC
SUNEX TOOLS
SCREWDRIVERS - HAND
IMPACT TOOLS
SOCKETS 135
135
STAR HEX KEY SET

9857T SET OF 7
MODEL SIZE
9857T10 Hex Key, T-Handle, Star, T10
98598 Hex Key, T-Handle, Hex, 1/8”
PROFESSIONAL GEARLESS
SCREWDRIVER SET
• Gearless driver with bit storage in handle
• 1/4" Drive bit holder
• Forward & reverse ratcheting
9829 SET OF 29
PHILLIPS
SIZE SIZE SIZE SIZE
#0 #1 #2 #3
TORX
SIZE SIZE SIZE SIZE
T10 T15 T20 T25
T30 T40
SQUARE
SIZE SIZE SIZE SIZE
#0 #1 #2
SLOTTED
SIZE SIZE SIZE SIZE
1/8" 5/32" 3/16" 7/32"
1/4"
POZI
SIZE SIZE SIZE SIZE
#1 #2 #3
HEX
SIZE SIZE SIZE SIZE
5/64" 3/32" 7/64" 1/8"
9/64"
Includes: Bit adapter, Blow molded case
SUNEXTOOLS.COM
136
136 HAND TOOLS
IMPACT - SCREWDRIVERS
SOCKETS
8 PC COMBINATION SCREWDRIVER SET
• Matte finish to resist flaking and abrasions
• Vapor blasted tip for enhanced durability
• Overmolded handle for user comfort
• Quick reference on handle end
• Bolster for optional added torque, available on the slotted
and phillips screwdrivers
118SS SET OF 8
MODEL SIZE
Cabinet 3/16" x 6"
Slotted 1/4" x 1-1/2" x 4" with Bolster
Slotted 5/16" x 6" with Bolster
Phillips #2 x 1-1/2"
Phillips #1 x 3" with Bolster
12 PC COMBINATION SCREWDRIVER SET

1112SS SET OF 12
MODEL SIZE
Cabinet 3/16" x 3"
Slotted 1/4" x 1-1/2" x 4"
Slotted 3/8" x 12"
Phillips #2 x 1-1/2"
SUNEX TOOLS
SCREWDRIVERS - HAND
IMPACT TOOLS
SOCKETS 137
137
SCREWDRIVER SET
SC
112PC SET OF 2
MODEL SIZE
20 PC COMBINATION SCREWDRIVER SET Cabinet 1/8" x 3"
• Matte finish to resist flaking and abrasions Phillips #0 x 3"
1120SS SET OF 20
MODEL SIZE
Cabinet 1/8" x 3"
Cabinet 5/32" x 4"
Cabinet 3/16" x 4"
Cabinet 3/16" x 6"
Slotted 1/4" x 1-1/2"
TORX® SCREWDRIVER SET
Phillips #0 x 3"
Phillips #2 x 1-1/2" • Overmolded handle for user comfort
Phillips #1 x 3" with Bolster • Quick reference on handle end
112TX SET OF 2
MODEL SIZE
Torx® T10 x 4" ®
Torx T15
Torx® T15 x 4"
Torx® T20
Torx® T20 x 4"
Torx® T25 x 4"
®
Torx T27 x 4"
Torx® T30 x 4"
VISIT WWW.SUNEXTOOLS.COM FOR INDIVIDUAL SCREWDRIVERS
SUNEXTOOLS.COM
138
138 HAND TOOLS
IMPACT - BIT SETS
SOCKETS
1/4" DRIVE UNIVERSAL SPLINE SOCKET
SET WITH MINI FLEX-HEAD RATCHET
• Universal spline sockets can be used to turn Universal spline, 6 pt.,
12 pt., star, square, and rounded hexagonal fasteners
• 72 fine tooth mini flex-head ratchet provides swivel arc of only 5˚ at
every ratchet head angle from 90˚ to 180˚
• Precise ratchet head flex tolerances, designed to keep head in
desired position during use
• Push button mechanism locks socket onto ratchet during use and
provides easy release when job is completed
• 1/4" Hex shank to 1/4" Drive socket adapter included, allowing use
of sockets with cordless drills and screwdrivers
9723 SET OF 13

4mm 4.5mm 5mm 5.5mm
6mm 7mm 8mm 9mm
10mm 11mm 12mm
Includes: 1/4" Hex Shank to 1/4" Drive Adapter, Mini Flex-Head Ratchet
MINI RATCHET AND BIT SET

• 36 S2 bits to accommodate any application
• Quick release extension bar for hard to reach applications
9726 SET OF 38
SL 1/8" SL 5/32" Hex 1/8" Hex 5/32"
SL 3/16" SL 1/4" Hex 3/16" Hex 1/4"
PH #1 (2pc) PH #2 (2pc) Torx T10 (2pc) Torx T15 (2pc)
PH #3 (2pc) PZ #1 (2pc) Torx T20 (2pc) Torx T25 (2pc)
PZ #2 (2pc) PZ #3 (2pc) Torx T27 (2pc) Torx T30 (2pc)
Hex 5/64" Hex 3/32" Torx T40 (2pc)
Includes: Aluminum case, Quick release extension bar, 72 tooth mini ratchet
4 BIT TYPES
SUNEX TOOLS
BIT SETS - HAND
IMPACT TOOLS
SOCKETS 139
139
SOCKET & BIT SET WITH 1/4" DRIVE

MINI DUAL FLEX HEAD RATCHET
• Duo-Drive™ ratchet drives sockets and bits
9732 SET OF 44
MODEL
1 Piece 1/4" Drive Double End Flexible Ratchet Handle, 72 Teeth
11 Piece 1/4" Drive 12 Pline Sockets: 4 & 5/32, 5 & 3/16, 5.5 & 7/32, 6 & 1/4,
7 & 9/32, 8 & 5/16, 8 & 11/32, 10 & 3/8, 11 & 7/16", 12 & 5/32, 13 & 1/2
1 Piece 1/4" Quick Release Extension Bar
30 Piece 1/4" Hex Shank S2 Bits
7 Piece Phillips: PH1, PH2, PH2, PH2, PH3, PH3
4 Piece Slotted 1/8", 5/32", 3/16", 1/4"
8 Piece Tamperproof Star: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H
4 BIT TYPES 4 Piece SAE Hex: 5/32", 3/16", 7/32", 1/4"
7 Piece Metric Hex: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
1 Piece Red Aluminum Case
1/2" IMPACT BIT DRIVER

• Bit holder contains 1/2" and 5/16" hex for Phillips and flat
screwdriver bits
• Handle design prevents possibility of hitting hand with hammer
when striking the impact driver
9828 SET OF 8
BIT SIZE BIT SIZE
No.2 Phillips 1-3/8" long, 5/16" Hex 5/16" Slotted 5/16" wide x 1-3/8" long Hex
No.2 Phillips 3-1/8" long, 5/16" Hex 5/16” Slotted 5/16" wide x 3-1/18 long Hex
No.3 Phillips 1-3/8" long, 5/16" Hex 5/16” Slotted 3/8" wide x 1-3/8" long Hex
No.3 Phillips 3-1/8" long, 5/16" Hex 5/16” Slotted 3/8" wide x 3-1/8" long Hex
QUICK CHANGE BIT SET

• Power bits constructed of durable S2 steel
• Includes 3.5" and 6" bits for extended reach in various applications
• Includes 5 extensions and adapters
9735 SET OF 16
MODEL
3.5" Power Bits: PH #1, PH #2, PZ #2, T-15, T-20
6" Power Bits: PH #1, PH #2, PZ #2, T-25, T-27, T-30
2" Socket Adaptor: 1/4", 3/8"
2" Magnetic Nut Drivers: 5/16"
4 BIT TYPES Quick Change Chuck: 3", 6"
SUNEXTOOLS.COM
140
140 HAND TOOLS
IMPACT - BIT SET
SOCKETS
QUICK CHANGE BIT SET
• Power bits constructed of durable S2 steel
• Includes 2", 3.5", and 6" bits for extended reach in
various applications
• Includes 8 extensions and adapters
9734 SET OF 34
MODEL
2" Power Bits: PH #1, PH #2, PH #3, PZ #1, PZ #2, PZ #3, T-8, T-9, T-10
3.5" Power Bits: PH #1, PH #2, PH #3, PZ #2, T-15, T-20, T-25, T-30
6" Power Bits: PH #1, PH #2, PH #3, PPZ #2, T-15, T-20, T-25, T-27, T-30
2" CRV Socket Adaptors: 1/4", 3/8", 1/2"
2" Magnetic Nut Drivers: 1/4", 5/16", 3/8" 4 BIT TYPES
Quick Change Adaptors: 3", 6"
MASTER BIT SET

9729 SET OF 208
MODEL
99 Piece 1/4" x 25mm Bits
46 Piece 1/4" x 26mm Security Bits
38 Piece 1/4" x 50mm Bits
1 Piece 1/4" x 1/4" x 25mm Socket Adaptor
22 Piece 1/4" x 25mm Socket Adaptors
22 Piece 1/4" x 38mm Nut Drivers
1 Piece 1/4" x 60mm Bit Holder
1 Piece 1/4" x 65mm Quick Release 4 BIT TYPES
PROFESSIONAL PICK SET

9835 SET OF 8
983501 10" Scratch Awl 983505 4" Scratch Awl
983502 10" 90 Hook 983506 4" 90 Hook
983503 10" Round Hook 983507 4" Round Hook
10" Double 4" Double
983504 983508
Angle Hook Angle Hook
SUNEX TOOLS
PICKS, HOOKERS, SCRAPERS - HAND
IMPACT TOOLS
SOCKETS 141
141
PICK SET
9840 SET OF 4
MODEL SIZE
984001 6-1/4" Straight Pick
984002 6-1/4" 90 Degree Pick
984003 6-1/4" Offset Pick
984004 6-1/4" Hook Pick
9-3/16" HOOK & PICK SET

9842 SET OF 4
MODEL SIZE
984201 9-3/16" Hook Pick
984202 9-3/16" Complex Pick
984203 9-3/16" 90 Degree Pick
984204 9-3/16" Straight Pick
UTILITY TOOL SET

9841 SET OF 5
MODEL SIZE
983901 Long Blade Scraper
983902 1/2" Carbon Scraper
983903 Short Blade Scraper
984101 Pick & Hook
984102 Cotter Key Puller
SCRAPER SET
9839 SET OF 3
MODEL SIZE
983901 Long Blade Scraper
983902 1/2" Carbon Scraper
983903 Short Blade Scraper
SUNEXTOOLS.COM
142
142 HAND TOOLS
IMPACT - PICKS, HOOKERS, SCRAPERS
SOCKETS
SEAL & O-RING REMOVAL SET
9843 SET OF 4
MODEL SIZE
984301 9" Spoon Tip Seal & O Ring Remover
984302 9" Contoured Tip Seal & O Ring Remover
984303 6" Spoon Tip Seal & O Ring Remover
984304 6" Contoured Tip Seal & O Ring Remover
UPHOLSTERY TOOL SET

• Exclusive 15˚ Bent Handle Door Panel Remover
3934 SET OF 5
MODEL SIZE
393401 9-1/2" Plastic Fastener Remover
393402 10" Door Upholstry Remover
393403 20-1/2" Long Door Panel Tool
393404 9-1/4" Bent Handle Door Panel Remover
393405 10" Bent Handle Door Panel Remover
PICK UP TOOL SET

• Flexible ends bend to desired angles to enable quick removal
of screw clamps
• Extra long 24" length shafts with total flexibility provide access
to those hard to reach areas
• 1/4" Bit Socket Driver accepts all standard bits
• 1/4" Socket Driver can be used with all 1/4" sockets and bit sockets
• Pick-up tool can be used as a claw or magnet to enable easy
retrievals in hard to reach areas
9813 SET OF 3
MODEL
1/4" Bit Driver
1/4" Socket Driver
2-in-1 Magnetic Claw Pick-Up Tool
2" FLEXIBLE PUTTY KNIFE

• Stainless steel blade to resist rust for longer tool life
• Flexible blade allows for even spreading across various surfaces
• Comfort grip handle to lessen user fatigue while in-use
• Easy to peel label for faster removal
PKF2
SUNEX TOOLS
PICKS, HOOKERS, SCRAPERS - HAND
IMPACT TOOLS
SOCKETS 143
143

PKF3

PKF4
1-1/2" FLEXIBLE PUTTY KNIFE

PKF112
1-1/4" FLEXIBLE PUTTY KNIFE

PKF114
2" STIFF PUTTY KNIFE

• Hammer end allows for finishing set nails and extra force when
removing stubborn paint
PKS2
SUNEXTOOLS.COM
144
144 HAND TOOLS
IMPACT - PICKS, HOOKERS, SCRAPERS
SOCKETS
3" STIFF PUTTY KNIFE
PKS3
1-1/2" STIFF PUTTY KNIFE

PKS112
1-1/4" STIFF PUTTY KNIFE

PKS114
1-1/4" BENT SCRAPER

PKSB114
MINI GLASS SCRAPER

• On-board blade storage for faster replacement
MGS3
SUNEX TOOLS
PRY BARS - HAND
IMPACT TOOLS
SOCKETS 145
145
GLASS SCRAPER
• Extended reach design for access to hard to reach areas
GS32X8
PROFESSIONAL PRY BAR SET

9803 SET OF 3
9812 12" Pry Bar 9825 25" Pry Bar
9817 17" Pry Bar
PRY BAR SET

9704 SET OF 4
9704-8 8" Pry Bar 9704-18 18" Pry Bar
9704-12 12" Pry Bar 9704-24 24" Pry Bar
PRY BAR SET

9804 SET OF 4
9804-6 6" 9804-16 16"
9804-12 12" 9804-20 20"
EXTENDABLE PRY BAR 22-33"

• Extends from 22" to 32"
• Patented interlock system with 20˚ offset head for leverage
• Pointed chisel on handle end for alignment
9805
SUNEXTOOLS.COM
146
146 HAND TOOLS
IMPACT - SPECIALTY
SOCKETS
AUTOMATIC CENTER PUNCH SET
• Adjustable spring tension allows various levels of striking force
9838 SET OF 2
9804-6 6" 9804-16 16"
9804-12 12" 9804-20 20"
STEPPED FORK SET

• Includes both handle and pneumatic driver for use with mallet
or air hammer
9834 SET OF 7
983403 11/16" 983406 1-7/16"
983404 15/16" 983407 1-5/8"
983405 1-3/8"
Includes: Pneumatic Driver (983402), Handle (983401)
SEAL AND BEARING DRIVER SET

• Seal provides proper size driver for nearly all automotive seal,
bearing, or bushing installation jobs
• Includes discs, handles, spacers, and drivers
• Range of 5/8" to 2" diameter discs is perfect for automotive service
3920 SET OF 12
SIZE SIZE SIZE SIZE
5/8" 3/4" 7/8" 1"
1-1/8" 1-1/4" 1-3/8" 1-1/2"
1-5/8" 1-3/4" 1-7/8" 2"
MASTER BRAKE CALIPER TOOL SET

• Caliper adapters specifically designed to service Nissan, Saab, and Honda models
• Caliper rotation tool with left threads for late model Ford cars and light trucks
3930 SET OF 18
39301 Right Rotating (H020) 393010 2-1/2" Adapter (H017)
39302 Left Rotating (H020-1) 393011 2-5/32" Adapter (H018)
39303 Disc (H010) 393012 1-7/8" Brake Adapter (H019)
39304 1-13/32" Adapter (H011) 393013 1-3/16" Adapter (Ha)
39305 2" Adapter (H012) 393014 Opel Adapter (Hb)
39306 2-3/16" Adapter (H013) 393015 Nissan Maxima Adapter (Hb)
39307 1-21/32" Adapter (H014) 393016 Citroën Adapter (He)
39308 1-21/32" Adapter (H015) 393017 Ford Adapter (Hm)
39309 1-1/4" Adapter (H016) 393018 Honda Adapter (Hn)
SUNEX TOOLS
SPECIALTY / BIT SETS - HAND
IMPACT TOOLS
SOCKETS 147
147
STAR BIT SOCKET SET

• S2 steel bits set in Chrome-Vanadium sockets
• 4.5" and 8" bit lengths add reach for recessed fasteners in confined spaces
9928 SET OF 18
MODEL TYPE MODEL TYPE
992810 1/4" Dr. T10 Long Star Bit Socket 9928108 1/4" Dr. T10 Extra Long Star Bit Socket
1/4" & 3/8" DRIVE 992830 3/8" Dr. T30 Long Star Bit Socket 9928308 3/8" Dr. T30 Extra Long Star Bit Socket
INDIVIDUAL STAR
BIT SOCKETS 992850 3/8" Dr. T50 Long Star Bit Socket 9928508 3/8" Dr. T50 Extra Long Star Bit Socket
TRIPLE SQUARE BIT SOCKET SET

4" LENGTH
• S2 steel bits set in Chrome-Vanadium sockets
• 4" bit lengths add reach for recessed fasteners in
confined spaces
9929 SET OF 9
MODEL TYPE
99294 1/4" Dr. 4mm Triple Square Long Bit Socket
1/4" & 3/8" DRIVE INDIVIDUAL 992914 3/8" Dr. 14mm Triple Square Long Bit Socket
TRIPLE SQUARE BIT SOCKETS 992918 3/8" Dr. 18mm Triple Square Long Bit Socket
WARNING: Use of these sockets with an impact tool can
cause serious injury.
SUNEXTOOLS.COM
148
148 HAND TOOLS
IMPACT - BIT SETS / NUT DRIVERS
SOCKETS
RIBE BIT SET
• Bits made from industrial S2 steel
• M4 - M14 Bit sizes in both 30mm and 75mm lengths
• 3/8" Dr. and 1/2" Dr. bit holders included
• Ideal for late model German engineered vehicles for cylinder
head, headlight, and transmission fill plug applications
9724 SET OF 24
Model # Type Model # Type
972401 M4 Ribe Bit (30mm) 972413 M5 Ribe Bit (75mm)
972410 M13 Ribe Bit (30mm) 972422 M14 Ribe Bit (75mm) 3/8" & 1/2" DRIVE
972411 M14 Ribe Bit (30mm) 972423 3/8" Dr. Bit Holder Socket
INDIVIDUAL RIBE BIT SOCKETS
972412 M4 Ribe Bit (75mm) 972424 1/2" Dr. Bit Holder Socket
Includes: 1/4" Hex Shank to 1/4" Drive Adapter, Mini Flex-Head Ratchet
IMPACT READY MAGNETIC

NUT SETTERS SET
• Complete set of SAE & MM
• Strong magnet holds fasteners in place
• Color coded for easy size identification
9933 SET OF 14

993306 6mm 993313 13mm
993307 7mm 993314 14mm
993308 8mm 993301 1/4"
993309 9mm 993302 5/16"
993310 10mm 993303 3/8"
993311 11mm 993304 7/16"
993312 12mm 993305 1/2"
SUNEX TOOLS
WRENCHES
FIT FOR ANY JOB.
Our wide selection of wrenches are ready to take on your
toughest workplace challenges. With combination, crowfoot,
stubby, adjustable, and jumbo combination wrenches and
sets, we’ve got whatever the job calls for; and each one is
guaranteed to perform for life.
RUST-RESISTANT, EASY CLEANING

Fully polished finish resists rust and oxidation,
and offers easier cleanup after tough jobs. DROP FORGED ALLOY STEEL
Heavy-duty steel composition
compo
de
handles tough jobsite demands.
12-POINT BOX
B ENDS
mac
Precision machined for
toleran
tighter tolerances
V-GROOVE
VE DESIGN
Reduces wear
ear and tear,
and provides
es a better
RAISED PANEL DESIGN
grip on fasteners.
eners. Wrenches available
availab in raised
panel designs for additional
strength and durability,
dura
allowing the wrench
wren shaft to
withstand rigorous use.
STORAGE AND AVAILABLE IN KITS

DISPLAY OPTIONS AND INDIVIDUALLY
Canvas pouch and storage Maximize your tool budget and
rail options are available get exactly what you need.
for additional convenience
in the workplace.
150
150 HAND TOOLS
IMPACT - WRENCHES
SOCKETS
RAISED PANEL SAE
COMBINATION WRENCH SET
9714 SET OF 14

712 3/8" 726 13/16"
714 7/16" 728 7/8"
716 1/2" 730 15/16"
718 9/16" 732 1"
720 5/8" 734 1-1/16"
722 11/16" 736 1-1/8"
724 3/4" 740 1-1/4"
RAISED PANEL METRIC

9715 SET OF 14

706M 6mm 713M 13mm
707M 7mm 714M 14mm
708M 8mm 715M 15mm
709M 9mm 716M 16mm
710M 10mm 717M 17mm
711M 11mm 718M 18mm
712M 12mm 719M 19mm
RAISED PANEL METRIC

9605M SET OF 5

920 20mm 923 23mm
921 21mm 924 24mm
922 22mm
SUNEX TOOLS
WRENCHES - HAND
IMPACT TOOLS
SOCKETS 151
151
RAISED PANEL METRIC

9606M SET OF 6

925 25mm 929 29mm
926 26mm 930 30mm
927 27mm 932 32mm
RAISED PANEL SAE JUMBO

97010 SET OF 10

942 1-5/16" 954 1-11/16"
944 1-3/8" 956 1-3/4"
945 1-7/16" 960 1-7/8"
948 1-1/2" 962 1-13/16"
952 1-5/8" 964 2"
RAISED PANEL SAE JUMBO

9707 SET OF 7

942 1-5/16" 956 1-3/4"
944 1-3/8" 960 1-7/8"
948 1-1/2" 964 2"
952 1-5/8"
SUNEXTOOLS.COM
152
152 HAND TOOLS
IMPACT - WRENCHES
SOCKETS
RAISED PANEL METRIC JUMBO
9707M SET OF 7

933 33mm 941 41mm
934 34mm 946 46mm
936 36mm 950 50mm
938 38mm
RAISED PANEL SAE SUPER JUMBO

9604 SET OF 4

968 2-1/8" 976 2-3/8"
972 2-1/4" 980 2-1/2"
FULLY POLISHED SAE V-GROOVE

9915 SET OF 14

991512 3/8" 991526 13/16"
991514 7/16" 991528 7/8"
991516 1/2" 991530 15/16"
991518 9/16" 991532 1"
991520 5/8" 991534 1-1/16"
991522 11/16" 991536 1-1/8"
991524 3/4" 991538 1-1/4"
SAE METRIC
SUNEX TOOLS
WRENCHES - HAND
IMPACT TOOLS
SOCKETS 153
153
FULLY POLISHED METRIC V-GROOVE

9917MPR SET OF 25

991708M 8mm 991821M 21mm
991709M 9mm 991822M 22mm
991710M 10mm 991823M 23mm
991711M 11mm 991824M 24mm
991712M 12mm 991925M 25mm
991713M 13mm 991926M 26mm
991714M 14mm 991927M 27mm
991715M 15mm 991928M 28mm
991716M 16mm 991929M 29mm
991717M 17mm 991930M 30mm
991718M 18mm 991931M 31mm
991719M 19mm 991932M 32mm
991829M 20mm

9917M SET OF 12

991708M 8mm 991714M 14mm
991709M 9mm 991715M 15mm
991710M 10mm 991716M 16mm
991711M 11mm 991717M 17mm
991712M 12mm 991718M 18mm
991713M 13mm 991719M 19mm

9918M SET OF 5

991820M 20mm 991823M 23mm
991821M 21mm 991824M 24mm
991822M 22mm
SUNEXTOOLS.COM
154
154 HAND TOOLS
IMPACT - WRENCHES
SOCKETS

9919M SET OF 8

991925M 25mm 991929M 29mm
991926M 26mm 991930M 30mm
991927M 27mm 991931M 31mm
991928M 28mm 991932M 32mm
FULLY POLISHED SAE STUBBY

9930 SET OF 11

993012 3/8" 993024 3/4"
993014 7/16" 993026 13/16"
993016 1/2" 993028 7/8"
993018 9/16" 993030 15/16"
993020 5/8" 993032 1"
993022 11/16"
FULLY POLISHED METRIC STUBBY

9930M SET OF 10

993010M 10mm 993015M 15mm
993011M 11mm 993016M 16mm
993012M 12mm 993017M 17mm
993013M 13mm 993018M 18mm
993014M 14mm 993019M 19mm
SAE METRIC
SUNEX TOOLS
WRENCHES - HAND
IMPACT TOOLS
SOCKETS 155
155
SUPER JUMBO RATCHETING WRENCH SET

• Geartech™ deep tooth design for increased torque over standard
ratchet wrenches
• 72 tooth design for a 5˚ swing per tooth vs. standard 30˚ for standard
ratchet wrenches
9937 SET OF 6

993701 1-5/16" 993705 1-5/8"
993702 1-3/8" 993709 1-7/8"
993704 1-1/2" 993710 2"
FULLY POLISHED SAE ANGLE HEAD

WRENCH SET
9914 SET OF 14

991401 3/8" 991408 13/16"
991402 7/16" 991409 7/8"
991403 1/2" 991410 15/16"
991404 9/16" 991411 1"
991405 5/8" 991412 1-1/16"
991406 11/16" 991413 1-1/8"
991407 3/4" 991414 1-1/4"
FULLY POLISHED METRIC ANGLE HEAD

WRENCH SET
9914M SET OF 14

991404M 6mm 991408M 13mm
991403M 7mm 991409M 14mm
991402M 8mm 991410M 15mm
991401M 9mm 991411M 16mm
991405M 10mm 991412M 17mm
991406M 11mm 991413M 18mm
991407M 12mm 991414M 19mm
SUNEXTOOLS.COM
156
156 HAND TOOLS
IMPACT - WRENCHES
SOCKETS
FULLY POLISHED METRIC JUMBO ANGLED
WRENCH SET
9926 SET OF 6

991420M 20mm 991423M 23mm
991421M 21mm 991424M 24mm
991422M 22mm 991425M 25mm
FULLY POLISHED METRIC JUMBO ANGLED

WRENCH SET
9927 SET OF 7

991426M 26mm 991430M 30mm
991427M 27mm 991431M 31mm
991428M 28mm 991432M 32mm
991429M 29mm
RAISED PANEL SAE JUMBO ANGLE HEAD

WRENCH SET
9916 SET OF 6

991601 1-3/8" 991604 1-3/4"
991602 1-1/2" 991605 1-7/8"
991603 1-5/8" 991606 2"
SAE METRIC
SUNEX TOOLS
WRENCHES - HAND
IMPACT TOOLS
SOCKETS 157
157
FULLY POLISHED SAE & METRIC

FLARE NUT WRENCH SET
9809 SET OF 9

980901 1/4" x 5/16" 980903 1/2" x 9/16"
980902 3/8" x 7/16" 980904 5/8" x 11/16"
980905 8 x 9mm 980908 15 x 17mm

980906 10 x 12mm 980909 19 x 21mm
980907 13 x 14mm
FULLY POLISHED SAE DOUBLE BOX

WRENCH SET
9950 SET OF 5

995001 3/8" x 7/16" 995004 3/4" x 13/16"
995002 1/2" x 9/16" 995005 7/8" x 15/16"
995003 5/8" x 11/16"
FULLY POLISHED METRIC DOUBLE BOX

WRENCH SET
9950M SET OF 5

995001M 10mm x 11mm 995004M 16mm x 18mm
995002M 12mm x 14mm 995005M 17mm x 19mm
995003M 13mm x 15mm
SUNEXTOOLS.COM
158
158 HAND TOOLS
IMPACT - WRENCHES
SOCKETS
FULLY POLISHED SAE HALF MOON
WRENCH SET
9935 SET OF 5

993501 5/16" x 3/8" 993504 11/16" x 3/4"
993502 7/16" x 1/2" 993505 13/16" x 7/8"
993503 9/16" x 5/8"
FULLY POLISHED METRIC HALF MOON

WRENCH SET
9935M SET OF 5

993501M 8mm x 10mm 993504M 17mm x 19mm
993502M 11mm x 13mm 993505M 21mm x 22mm
993503M 14mm x 15mm
FULLY POLISHED SAE S-STYLE

WRENCH SET
9940 SET OF 5

994001 5/16" x 3/8" 994004 5/8" x 11/16"
994002 7/16" x 1/2" 994005 11/16" x 3/4"
994003 9/16" x 19/32"
SAE METRIC
SUNEX TOOLS
CROWFOOT WRENCHES - HAND
IMPACT TOOLS
SOCKETS 159
159
FULLY POLISHED METRIC S-STYLE

WRENCH SET
9940M SET OF 5

994000M 10mm x 11mm 994004M 16mm x 17mm
994002M 12mm x 13mm 994005M 18mm x 19mm
994003M 14mm x 15mm
FULLY POLISHED 1/2" DRIVE JUMBO

SAE CROWFOOT WRENCH SET
9721 SET OF 14

97734 1-1/16" 97748 1-3/4
97744 1-1/2" 97760 1-3/8"
97740 1-1/4" 97741 1-5/16"
97736 1-1/8" 97746 1-5/8"
97747 1-11/16" 97742 1-7/16"
97749 1-13/16" 97750 1-7/8"
97738 1-3/16" 97752 2"

9720 SET OF 7

97732 1" 97740 1-1/4"
97734 1-1/16" 97744 1-1/2"
97736 1-1/8" 97760 1-3/8"
97738 1-3/16"
SIZES BELOW NOT IN SET - SOLD INDIVIDUALLY
97730 15/16" 97742 1-7/16"
97741 1-5/16"
SUNEXTOOLS.COM
160
160 HAND TOOLS
IMPACT - CROWFOOT WRENCHES
SOCKETS
9722 SET OF 6

97746 1-5/8" 97752 2"
97748 1-3/4" 97754 2-1/8"
97750 1-7/8" 97756 2-1/4"

METRIC CROWFOOT WRENCH SET
9730 SET OF 8

97324 24mm 97328 28mm
97325 25mm 97329 29mm
97326 26mm 97330 30mm
97327 27mm 97332 32mm

METRIC CROWFOOT WRENCH SET
9740 SET OF 7

97434 34mm 97441 41mm
97435 35mm 97442 42mm
97436 36mm 97446 46mm
97438 38mm
SAE METRIC
SUNEX TOOLS
CROWFOOT WRENCHES - HAND
IMPACT TOOLS
SOCKETS 161
161
FULLY POLISHED 3/8" DRIVE SAE FLARE

NUT CROWFOOT WRENCH SET
9708 SET OF 8

970802 3/8" 970810 5/8"
970804 7/16" 970812 11/16"
970806 1/2" 970814 3/4"
970808 9/16" 970818 7/8"
FULLY POLISHED 3/8" DRIVE METRIC

FLARE NUT CROWFOOT WRENCH SET
9710M SET OF 10

971010 10mm 971015 15mm
971011 11mm 971016 16mm
971012 12mm 971017 17mm
971013 13mm 971018 18mm
971014 14mm 971019 19mm
WIDE JAW ADJUSTABLE WRENCHES

• 50% wider on average than standard adjustable wrenches
• 30% more jaw depth than standard adjustable wrenches
• Rubber handle pad provides added grip and comfort
9611 - 6"
9612 - 8"
9613 - 10"
9611 9613
9614 - 12"
9612 9614
SUNEXTOOLS.COM
162
162 HAND TOOLS
IMPACT - ADJUSTABLE WRENCHES
SOCKETS
8" RATCHETING ADJUSTABLE WRENCH
• Patented ratcheting design grips any fastener without need for
readjustment
• Thumb lock easily switches between ratcheting and
non-ratcheting functions
9610
1/4" & 3/8" DRIVE ADJUSTABLE

T-HANDLE SPEED WRENCH SET
• T-Handle design provides maximum torque without power tools
• Features an anodized adjustable speed grip with four positions for
great control on any application
• Ergonomic handle provides ultimate comfort and control
9727 SET OF 2
TACTICAL SERIES
ADJUSTABLE WRENCHES
• Unique anti-slip design resists slippage from fastener
• Patented jaw design provides additional contact surface on hex
fasteners for 30% more torque
• Non-protruding movable jaws allows for use in tight spaces
• Ideal for electric, carpentry, plumbing, automotive, and general
purpose applications
9615
9615 - 8"
9616 - 10"
9616
SAE METRIC
SUNEX TOOLS
ADJUSTABLE WRENCHES - HAND
IMPACT TOOLS
SOCKETS 163
163
ADJUSTABLE WRENCH SET

9617 SET OF 2
9616 10" Tactical 9612 8" Wide Jaw
ADJUSTABLE WRENCH SET

9618 SET OF 4
961801 6" 961803 10"
961802 8" 961804 12"
10" SUPER HEAVY DUTY PIPE WRENCH

• Fully forged CR-MO steel floating jaw allows for quick adjustments
and better grip ability
• Knurled thumb wheel provides non-stick rotation with
self-cleaning threads
• Sturdy I-Beam handle design delivers maximum strength and leverage
3810

3812
SUNEXTOOLS.COM
164
164 HAND TOOLS
IMPACT - PIPE WRENCHES
SOCKETS

3814

3818
18" ALUMINUM SUPER HEAVY DUTY

PIPE WRENCH
3818A

3824
SUNEX TOOLS
PIPE WRENCHES - HAND
IMPACT TOOLS
SOCKETS 165
165

PIPE WRENCH
3824A

PIPE WRENCH
3836A
SUNEXTOOLS.COM
Service Carts ............................ Pg 168
Accessories .............................. Pg 174
Covered by a one-year warranty,
Sunex will replace any part of your
Tool Storage unit during the life of
the warranty. This includes but is
not limited to gas shocks, casters,
and drawer slides. Return shipping is
not required, a replacement part will
be sent after approval of receipt and
product failure.
TOOL STORAGE
As long-time makers of quality tools, Sunex understands the value
and investment represented by your tool collection. You’ve spent
years carefully selecting the right tools for your needs, whether
that’s at your place of business or right in your own garage.
Designed for high performance, our tools are also built to stand the
test of time. Helping you get the most out of your tools and budget!
From utility carts to full-featured toolboxes, Sunex Tools has versatile
and practical storage solutions. And we don’t cut corners. Our line
includes pro features such as large casters for easy maneuvering,
thicker steel for added durability and protection, and wider drawer
slides for better accessibility and increased storage capacity. With
so many sizes and configurations to choose from, we’ll help you
find a storage solution as unique as your tool collection itself.
168 SERVICE CARTS
TWO SHELF UTILITY CART
• Heavy Duty, 5" hard rubber casters for smooth operation
• 4 bin on board storage built into the cart handle
• Deep shelf design for max storage capacity
• Constructed from heavy duty Polypropylene material for long
life and durability
• Easy assembly with zinc coated hardware for ultimate stability
8034
LOAD CAPACITY (LBS.) 500
HEIGHT (IN.) 33
LENGTH (IN.) 41
WIDTH (IN.) 17
SHELF LENGTH (IN.) 30
SHELF WIDTH (IN.) 16
SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 39.5
OVERSIZED HEAVY DUTY

TWO SHELF UTILITY CART
• Heavy Duty, 5" hard rubber casters for smooth operation
• 5 bin on board storage built into the cart handle
• Deep shelf design for max storage capacity
• Constructed from heavy duty Polypropylene material for long
life and durability
• Easy assembly with zinc coated hardware for ultimate stability
8036
HEIGHT (IN.) 33
LENGTH (IN.) 46
WIDTH (IN.) 25
SHELF LENGTH (IN.) 36
SHELF WIDTH (IN.) 24.5
SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 55
SUNEX TOOLS
SERVICE CARTS 169
COMPACT SLIDE TOP UTILITY CART

BLACK OR RED
• Compact design for tight spaces
• Locking slide top and drawers for added security
• Grooved rubber mats on slide top work surface are
durable and easy to clean
8035
Black HEIGHT (IN.) 39.40

8035 LENGTH (IN.) 29.25
WIDTH (IN.) 20.7
TOP BIN DEPTH (IN.) 5
TWIN DRAWER DEPTHS (IN.) 3
BOTTOM SHELF DEPTH 3
WEIGHT (LBS.) 123.2
Red
8035R
ECONOMY SERVICE CART

• Large, easy to maneuver 4" wheels: 2 locking
• Durable powder coat finish
8003SC
HEIGHT (IN.) 32.5
LENGTH (IN.) 30
WIDTH (IN.) 16
SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 33.10
Available: Locking Drawer - 8006RB

Locking screwdriver/pry bar holder - 8008
MULTI-PURPOSE SERVICE CART

• Large, easy to maneuver 4" wheels: 2 locking
• Chrome 16 gauge steel frame
• Durable powder coat red finish
8005SC
HEIGHT (IN.) 35.3
LENGTH (IN.) 30
WIDTH (IN.) 16
SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 39.33
SUNEXTOOLS.COM
170 SERVICE CARTS
SERVICE CART WITH
LOCKING TOP DRAWER
• Locking drawer and locking top use common key
• Clip-on roller-bearing slides on drawer
• Large, easy to maneuver 4" wheels - 2 locking
• Chrome 16 gauge steel frame
8013A
HEIGHT (IN.) 35.3
LENGTH (IN.) 30
WIDTH (IN.) 16
DRAWER DEPTH (IN.) 4 Black
8013ABK
SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 64.45
Red Blue
8013A 8013ABL
DELUXE SERVICE CART

WITH LOCKING TOP AND DRAWERS
• Cart includes: 4 drawer service cart with leg extensions,
large locking screwdriver/pry bar holder, and side work bench
8013ADELUXE
HEIGHT (IN.) 32.5
LENGTH (IN.) 30
WIDTH (IN.) 16
TWIN TOP DRAWER DEPTHS (IN.) 2
MIDDLE DRAWER DEPTHS (IN.) 2
BOTTOM DRAWER DEPTH (IN.) 4
Red
BOTTOM SHELF (IN.) 3
8013ADELUXE
WEIGHT (LBS.) 131
Black Blue
8013ABKDELUXE 8013ABLDELUXE
SUNEX TOOLS
SERVICE CARTS 171
HEAVY DUTY 5 DRAWER SERVICE CART

• 5" Oversized casters: 2 locking
• Flip top locking lid, 5 drawers all pre-assembled with common
keyed locks, screwdriver/pry bar holder, and side work shelf
• EVA foam drawer liners included
• Chrome 16 gauge steel frame and powder coated finished
8045
HEIGHT (IN.) 40
LENGTH (IN.) 27
WIDTH (IN.) 18.25
TWIN TOP DRAWER DEPTHS (IN.) 2
TOP LARGE DRAWER DEPTH (IN.) 2
Red MIDDLE LARGE DRAWER DEPTH (IN.) 4
8045
BOTTOM LARGE DRAWER DEPTH (IN.) 6
BOTTOM SHELF DEPTH (IN.) 3
WEIGHT (LBS.) 116.8
Optional: 5pc lock set - 8045LS

Locking screwdriver/pry bar holder - 8008
Blue Black
8045BL 8045BK
3 DRAWER SLIDE TOP UTILITY CART

WITH POWER STRIP
• Stainless steel work surface slides open for access to additional
storage and two storage ideas
• Patented protective edge bumpers absorb damage to cart or car
• Recessed drawers with aluminum drawer pulls and 100%
full extension
• Secure power access in cart
• Built in pry bar, screwdriver, extension storage
• 5" x 2" casters provide greater durability and easier rolling
8035XT
HEIGHT (IN.) 39
Green
WIDTH (IN.) 36
8035SXTLG
DEPTH (IN.) 20
TOP SURFACE (LBS.) 200
TOP SURFACE EXTENDED (LBS.) 50
NUMBER OF DRAWERS 3
3" DRAWER 1 CAPACITY (LBS.) 100
Bl k
Black Orange Red
R d Blue
Bl
8035XTBK 8035XTOG 8035XT 8035XTBL WEIGHT (LBS.) 251.3
SUNEXTOOLS.COM
172 SERVICE CARTS
PREMIUM 4 DRAWER SERVICE CART
• 5" Oversized casters: 2 locking
• Ergonomic grip handle
• Locking top
• Gas shocks to support lid
8054
HEIGHT (IN.) 39.5
LENGTH (IN.) 33.25
DEPTH (IN.) 20
TWIN SMALL DRAWER DEPTHS (IN.) 3.25
MIDDLE LARGE DRAWER DEPTH (IN.) 4.25
BOTTOM LARGE DRAWER DEPTH (IN.) 5
Red
BOTTOM SHELF (IN.) 3 8054
WEIGHT (LBS.) 163.14
Black
8054BK
FULL DRAWER SERVICE CART

• Ships fully assembled
• 6 drawers and locking top bin
• Heavy duty 5" casters
• Heavy duty 18 gauge construction
• Full extension roller-bearing drawer slides
• Locking top with gas shocks for lid support
• Drawer liners included
8057
HEIGHT (IN.) 39.5
LENGTH (IN.) 34.5
WIDTH (IN.) 20
TOP BIN (IN.) 5
3 SMALL DRAWERS (IN.) 3
Red
2 MIDDLE LARGE DRAWERS (IN.) 4 8057
1 BOTTOM LARGE DRAWER 5
WEIGHTS (LBS.) 214.5
Black Matte Black Green Orange Purple Silver

8057BK 8057MB 8057G 8057O 8057P 8057S
SUNEX TOOLS
SERVICE CARTS 173
PREMIUM 41" 8 DRAWER SERVICE CART

• Single bay design gives you over 1,000 LBS of load capacity
• 24" Depth makes this the deepest cart in its class
• Backed by a 1 year warranty
8060
HEIGHT (IN.) 43
WIDTH / WIDTH WITH HANDLE (IN.) 37 / 41
DEPTH (IN.) 24
TOP SURFACE (LBS.) 150
Red 3" DRAWER 3 CAPACITY (LBS.) 200
8060 5" DRAWER 4 CAPACITY (LBS.) 360
5" HALF DRAWER 6 CAPACITY (LBS.) 200
WEIGHT (LBS.) 308.65
Blue Bl k
Black
8060BL 8060MB
HEAVY DUTY ADJUSTABLE WORK TABLE

WITH DRAWER
• Standard screwdriver and pry bar holder
• 1" deep drawer for convenient storage
8019
LOW HEIGHT (IN.) 34
HIGH HEIGHT (IN.) 47.75
TRAY DIMENSIONS (IN.) 29 X 20 X 1
CASTER SIZE (IN.) 2
WEIGHT (LBS.) 35.2
Replacement caster with nut - RS8018CS
SUNEXTOOLS.COM
174 SERVICE CARTS
SIDE WORK BENCH FOR 8054/8057

• Large side shelf for 8054 and 8057
• Collapsible design for convenient storage
• Includes non-marring rubber mat
8009
CAPACITY (LBS.) 40
HEIGHT (IN.) 6
LENGTH (IN.) 14.4
WIDTH (IN.) 13.2
LARGE LOCKING SCREWDRIVER/

PRY BAR HOLDER
• Attaches to 8003SC, 8005SC, & 8013A and most other carts
(drill holes to attach)
• 3 different hole sizes: 1", 3/4", and 1/2" diameters
• Locking lid for security
8011
CAPACITY 26 TOOLS
HEIGHT (IN.) 4
LENGTH (IN.) 10.88
WIDTH (IN.) 16.13
SUNEX TOOLS
SERVICE CARTS 175
SIDE WORK BENCH FOR 8013A

• Folds down when not in use for storage
8004
CAPACITY (LBS.) 30
HEIGHT (IN.) 5.9
LENGTH (IN.) 14.6
WIDTH (IN.) 16.34
SERVICE CART WITH 4 PIECE LOCK SET

• 4 piece lock and key set, all keyed alike
8013LS
TOP LOCK, KEY & LATCH
DRAWER LOCK, KEY & LATCH
3 DRAWER UNIT LOCK, KEY & LATCH
PRY BAR/SCREWDRIVER HOLDER, LOCK & LATCH
SUNEXTOOLS.COM
Floor Service Jacks................... Pg 9
Floor Jacks ............................... Pg 16
Truck Jacks .............................. Pg 41
Transmission Jacks .................. Pg 75
Bottle Jacks .............................. Pg 86
Jack Stands .............................. Pg 93
Underhoist Stands .................... Pg 94
Truck Equipment ....................... Pg 190
Engine Cranes .......................... Pg 191
Engine Stands........................... Pg 192
Accessories & Specialty ............ Pg 193
During the one-year warranty
period, Sunex Tools will repair or
replace any unit, which proves
to be defective in material or
workmanship. You can work easier
knowing your Lift Equipment is
guaranteed to perform.
LIFTING
We’ve come a long way in forty years, and our full line of
lifting equipment includes jacks, hoists, stands, and engine
supports; virtually any kind of lifting equipment, for
any application. Whether it’s our industry-leading safety
standards, innovative designs or no hassle warranties,
Sunex Lifting Equipment cuts no corners.
Uncompromised Safety Standards: We put all of our
lifting equipment through a voluntary and rigorous safety
certification process, as outlined by the ASME PASE-
2014 Safety Standard for Portable Automotive Service
Equipment. This makes Sunex stand out as a company that
considers work place safety to be top priority.
Engineering Innovation: Low-profile designs and quick-
lift technology keeps your shop running faster and more
efficiently.
178 LIFTING - FLOOR SERVICE JACKS
1.75 TON "ROADSTER" ALUMINUM
FOLDING JACK
• Handle folds and hooks for carrying
• Lightweight for easy transportation
• Meets ASME PASE 2014 safety standards
66175FASJ
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL SADDLE HANDLE SHIPPING WT.
MODEL #
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) DIAMET (IN.) LENGTH (IN.) (LBS.)
6617FASJ 1.75 3.5 16.5 23 11.25 4.25 35 39
2 TON ALUMINUM SERVICE JACK

A 49 pound lightweight jack designed for the track side racer or
automotive enthusiast that want quick operating performance.
• RapidRise hydraulic power unit with dual pump pistons that raise
the lift arm to maximum height in five pump strokes with no load
• Thick frame side plates and reinforced lift arm for added strength,
chassis torsion control, and durability
• Angular positioned pump pistons provide maximum effective pump
stroke when jack is completely under the vehicle
• Wiper seals protect hydraulic system from contaminants
• Overload and bypass safety valves prevent the jack from being used
beyond its rated capacity and prevent ram overextension
• Ball bearing mounted rear swivel caster wheels and wide track front
wheels for easy maneuverability
• Side mounted handles for carrying and easy positioning
• Rubber saddle protector insert prevents scratching and gouging
of under car components
• Two piece handle for storage; quick lock feature for engagement
and disengagement of handle halves
6602ASJ
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL OVERALL SADDLE DIA. HANDLE SHIPPING WT.
MODEL #
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) (IN.) LENGTH (IN.) (LBS.)
6602ASJ 2 3.5 20 26.5 13 6.5 4.56 50 58
SUNEX TOOLS
FLOOR SERVICE JACKS - LIFTING 179
3 TON ALUMINUM SERVICE JACK

The market leading big-brother to the 2 Ton 6602ASJ boasting a
lightweight aluminum frame and dual pump pistons for rapid rise action.
• Rapid Rise Technology reaches max height in 7.5 pumps with no load
• Side mounted handles for easy jack positioning
• Wide track wheels for easy maneuverability
• Rubber saddle pad and foam bumper pad protect vehicle
• Thick frame side plates and reinforced lift arm for added strength,
chassis torsion control, and durability
• Overload and bypass safety valves prevent the jack from being
used beyond its rated capacity and ram overextension
• Ball bearing mounted rear swivel caster wheels and wide track
front wheels for easy maneuverability
• Two piece handle for storage; quick lock feature for engagement
and disengagement of handle halves
• Backed by 1 year SUNEXpress™ Warranty
6603ASJ
6603ASJPK - 2-PACK OF 1003AJ
SHIPPING
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL SADDLE DIA. HANDLE
MODEL # WEIGHT
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) (IN.) LENGT (IN.)
(LBS.)
6603ASJ 3 3.8 19.3 26.4 13 4.5 50 58.0
2 TON LOW PROFILE SERVICE JACK

A heavy duty service jack designed with a low profile chassis and lift
height to get under vehicles with limited ground clearance.
• RapidRise hydraulic power unit includes dual pump pistons that

raise the lift arm to maximum height in 5-1/2 pump strokes
• Strong chassis with upper and lower frame flanges to prevent
twisting
• Wide front wheels and ball bearing mounted rear caster wheels
for stability and easy maneuverability
stroke when jack is completely under the vehicle
• Pump piston dust shields and wiper seals protect hydraulic system
from contaminants
used beyond its rated capacity and prevent ram overextension
6613A
SHIPPING
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL CHASSIS SADDLE DIA. HANDLE
MODEL # WEIGHT
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) (IN.) LENGTH (IN.)
(LBS.)
6613A 2 2.83 19.68 28.93 13.46 5.87 4.72 50 77.16
SUNEXTOOLS.COM
180 LIFTING - FLOOR SERVICE JACKS
2 TON LOW RIDER SERVICE JACK
The lowest and highest lifting capacity on the market from 2.75"
to 24". Ideal for sports cars, exotic cars, trucks, and SUV’s.
• 2.75" min height is ultra-low and ideal for sports cars,

exotic cars, and flat tires
• 24" max height is versatile and lifts high enough for pick-ups and SUV's
• Rapid rise technology with dual pump pistons reaches max
height quickly
• 18" throw is long and reaches all lift points under vehicle
• Low profile design is consistent throughout the whole chassis,
allowing full reach beyond pinch welds
6602LP
SHIPPING
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL SADDLE DIA. HANDLE
MODEL # WEIGHT
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) (IN.) LENGTH (IN.)
(LBS.)
6602LP 2 2.75 24 36 32.5 4.0 45.25 97
3 TON LOW RIDER SERVICE JACK

• 2.75" min height is ultra-low and ideal for sports cars,
exotic cars, and flat tires
• Upgraded Uni-Weld constructed power unit includes high performance
seals and oil for long life
• Rapid rise technology with dual pump pistons reaches max
height quickly
• Lowest minimum height of its class
• Low profile design is consistent throughout the whole chassis,
allowing full reach beyond pinch welds
6603LP
SHIPPING
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL OVERALL SADDLE DIA. HANDLE
MODEL # WEIGHT
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) (IN.) LENGTH (IN.)
(LBS.)
6603LP 3 2.75 20 31.8 14.4 7.5 4.64 50 118.6
SUNEX TOOLS
FLOOR SERVICE JACKS - LIFTING 181
3 TON SERVICE JACK

A standard duty floor jack for the budget conscious user who still wants
the quality of a Sunex product to handle any automotive repair shop work.
• High carbon steel side plates for increased chassis strength

• Wide front wheels and ball bearing mounted rear caster wheels
for stability and easy maneuverability
• Two piece handle with knurled hand grip provides non-slip ease
of pumping and longer reach under the vehicle
used beyond its rated capacity and prevent ram overextension
6603
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL OVERALL SADDLE HANDLE SHIPPING WT.
MODEL #
(TONS) (IN.) (IN.) LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) DIA. (IN.) LENGTH (IN.) (LBS.)
6603 3 4.5 19.5 24.5 13.75 6.25 4.75 39.25 81.5
3.5 TON SERVICE JACK

A heavy duty service jack designed for continuous, dependable
performance in any automotive service and repair shop.
• RapidRise hydraulic power unit includes dual pump pistons that

raise the lift arm to maximum height in six full incremental pump
strokes with no load
• Strong chassis with upper and lower frame flanges to withstand twisting
• Wide front wheels and ball bearing mounted rear caster wheels for
stability and easy maneuverability
stroke when jack is completely under a vehicle
• Pump piston dust shields and wiper seals prevent contaminants from
entering the hydraulic system
• Rubber saddle pad protects vehicle frame from scratches while also
providing a sure grip lifting surface. Grooved saddle pad surface
accepts vehicle panel rail
• Pump handle protector pad prevents damage to under car components
and any vehicle parked close to the jack
66037
66037JPK - 2 PACK OF 1006
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL OVERALL SADDLE HANDLE SHIPPING WT.
MODEL #
66037 3.5 3.9 14.2 28 14.2 6.4 4.75 50 101
SUNEXTOOLS.COM
182 LIFTING - FLOOR JACKS
HEAVY DUTY FLOOR JACKS
A heavy duty service jack designed for continuous, dependable performance
in fleet truck shops, farm equipment dealers, bus company garages and
commercial vehicle service bays.
• Heavy gauge steel side plates prevent twisting

• Front wheels with roller bearings and ball bearing mounted rear caster
wheels provide stability and easy maneuverability
• Rear kick plate helps turn jack in tight places
• Hydraulic power unit is Uniweld constructed for increased strength and
leak prevention
• Flash chromed ram and pump piston for rust prevention
• Foot pump pedal raises the lift arm to the load quickly and “T” handle
pumps jack under load
• Lever on “T” handle locks it in any one of three different positions
• Release knob on top of handle operates independently of handle
locking lever and any vehicle parked close to the jack
6604 - 5 TON 6604
6606 - 5 TON AIR/HYDRAULIC

6609 - 10 TON
6620
CAPACITY LOW HEIGHT HIGH HEIGHT CHASSIS OVERALL CHASSIS SADDLE HANDLE SHIPPING WT.
MODEL #
6604 5 5 22 55.5 17 9.5 5.75 45.75 225
6606 5 @ 100PSI 5 22 55.5 17 9.5 5.75 45.75 230
6609 10 6.25 22.5 61 17 10.5 5.875 45.75 359
6614 10 @ 100PSI 6.25 22.5 61 18.5 10.5 5.875 45.75 364
6620 20 7.3 24.6 59 13.7 11.25 5.7 46 589
10 TON PORTABLE AIR LIFT JACK

Ideal for lifting trucks, trailers, farm and construction equipment, where
crowded conditions require single point contact but may be used in pairs.
• 8" diameter pneumatic wheels make maneuverability easy

• Air valve provides speed control when lifting or lowering a load
• T-handle and 8 foot air hose for remote safe positioning and operation
• Extension tubes and detent pins provide multiple lift heights and support
after lifting
• Ridged saddle with locating lugs provides excellent gripping surface
6710
SPECS ON OPPOSITE PAGE
SUNEX TOOLS
FLOOR JACKS - LIFTING 183
20 TON AIR/HYDRAULIC FLOOR JACK

A standard duty truck jack for the budget conscious user who still wants
the quality of a Sunex product to handle truck and trailer shop work, bus
work, and roadside service calls.
• Conveniently lifts up to 20 tons with air/hydraulic powered pump

• Narrow chassis design fits easily between tandem wheels
• Hand grip can be used to store in vertical position
• 5" diameter composite wheels make maneuverability easy
beyond its rated capacity and ram overextension
• Integrated filter protects air motor
6623
22 TON AIR/HYDRAULIC JACK

Designed for heavy duty truck and trailer shop use, rail and bus work,
and portable for roadside service calls.

• Chassis base is contoured so wheels make contact with ground when
jack is not under load and raises them off the ground when under load
to prevent damage
• 8" diameter pneumatic wheels make maneuverability easy
• Self-retracting ram
6622
22 TON AIR / HYDRAULIC TRUCK JACK

• Full air actuation raises and lowers the ram with simple turn of
variable speed control knob
• Springless ram design eliminates weathering, rusting and damage
of spring and spring retainers
• Jumbo 9" tires effortlessly traverse over gravel, fasteners, and air
hoses on shop floors
• Convenient lever sets handle in 3 positions for usage, transport,
and storage
• Front positioning handle assists in positioning the jack under the lift point
• 3 adapters in 0.8", 2.4", and 3.0" sizes provide multiple maximum
heights for specific applications
6722
LOW RAM EXT. MAX. HEIGHT OVERALL OVERALL HANDLE

CAPACITY WHEEL SADDLE SHIPPING
MODEL # HEIGHT TRAVEL SCREW W/ EXT. LENGTH WIDTH LENGTH
(TONS) DIA. (IN.) (IN.) WT. (LBS.)
(IN.) (IN.) ADJ. (IN.) TUBES (IN.) (IN.) (IN.) (IN.)
6710 10 @ 175 PSI 17.75 11.5 49 58 13.63 8 2x5 37.5 187
6623 20 @ 100 PSI 8.67 3.94 2.76 23.35 17.8 6.5 5 1.75 45 54
6622 22 @ 100 PSI 9 4.75 3.25 21 21 13 8 1.75 49 119
6722 22 8.9 12.8 4 21.7 22.25 14.17 9 1.813 48.4 86.64
SUNEXTOOLS.COM
184 LIFTING - TRUCK JACKS
22/35 TWO STAGE TRUCK JACK
Same use and features as the model 6622 but with telescopic rams
and no adapters.

• Chassis base is contoured so wheels make contact with ground when
jack is not under load and raises them off the ground when under
load to prevent damage
• Self-retracting two stage ram
6635
MAX.
LOW RAM EXT. CHASSIS OVERALL HANDLE SHIPPING
CAPACITY HEIGHT W/ WHEEL SADDLE
MODEL # HEIGHT TRAVEL SCREW LENGTH WIDTH LENGTH WEIGHT
(TONS) ADAPTER DIA. (IN.) DIA. (IN.)
(IN.) (IN.) ADJ. (IN.) (IN.) (IN.) (IN.) (LBS.)
(IN.)
22/35 @
6635 8.625 7.75 3.375 19.75 24 13.75 8 2 49 119
100 PSI
44 TON TRUCK AXLE JACK WITH AIR RETURN

Ideal for class 8 truck, farm equipment, and fleet maintenance.
Springless design lifts efficiently by eliminating downward force of springs.
• Full air actuation raises and lowers the ram with simple turn of
variable speed control knob
• Springless ram design eliminates weathering, rusting and damage
of spring and spring retainers
• Flash chromed ram is rust prohibitive for smooth operation and
protection against weathering
• Sturdy 1 piece handle eliminates wobble and reaches 54" for
safe operation
• 2 stacking adapters provide up to an additional 7.7" for maximum reach
• 2 adapters in 3.0", and 4.7" sizes provide multiple max heights for
specific applications
6744
MAX.
LOW RAM EXT. OVERALL HANDLE SHIPPING
CAPACITY HEIGHT W/ WHEEL SADDLE
MODEL # HEIGHT TRAVEL SCREW WIDTH LENGTH WEIGHT
(TONS) ADAPTER DIA. (IN.) DIA. (IN.)
(IN.) (IN.) ADJ. (IN.) (IN.) (IN.) (LBS.)
(IN.)
44 @
6744 8.25 5.1 n/a 21.0 11.4 6 3.25 54.3 95
115 PSIG
SUNEX TOOLS
TRANSMISSION JACKS - LIFTING 185
700 LB. TELESCOPIC TRANSMISSION JACK

Telescopic rams enable transmission to be transferred from jack to work
table and extend to reach a max height of 74”.
• Universal saddle with four ratcheting arms quickly adjust to any

transmission pan configuration
• Chain tie down fastens the load to the saddle and ensures a secure hold
• Overload valve prevents jack from being used beyond rated capacity
• Wide base legs with swivel casters provide stability and easy
maneuverability under load
• Two locking casters prevent jack from moving ensuring shop safety
7700B - 700 LB. HEAVY DUTY PEDESTAL
7700B
1000 LB. TELESCOPIC TRANSMISSION JACK

Lowered telescopic rams enable the transmission to be transferred to work
table and reach a maximum height of 74”.
• Universal saddle with four ratcheting arms quickly adjust to any

transmission
• First stage ram conveniently operated by hands-free foot pedal
• Second stage reaches maximum 74” height by hand pump
• Foot activated release pedal provides safe, controlled lowering of load
• Safety overload valve prevents jack from being used beyond rated
capacity
7796 7793B 7793B - 1000 LB.

7796 - 1000 LB. AIR/HYDRAULIC
1 TON TRANSMISSION JACK (HD)

7798 - 1 TON
• Full 2-Stage air operation travels the full height of the ram
with convenient hand
• 2 methods of lowering load including foot pedal and hand release knob
for quick descent or slow control
• 2" non-marring tension straps replace cumbersome straps and
chains, making work holding and positioning adjustments safer,
faster, and easier
7798
LOW HIGH SHIPPING

CAPACITY SADDLE TILT SADDLE TILT
MODEL # HEIGHT HEIGHT BASE (IN.) WEIGHT
(LBS.) FORE AND AFT SIDE TO SIDE
(IN.) (IN.) (LBS.)
7793B 1000 35.5 75.5 53° by 30° +10°, -30° 21.25 x 35 167
7796 1000 35.5 73.5 37° by 26° 12° 30 x 30 145
7798 1000 35 75 37° by 26° 12° 30.25 x 30.25 145
7700B 700 49.5 69.5 15° by 15° 12° 28.75 x 35 96
SUNEXTOOLS.COM
186 LIFTING - TRANSMISSION JACKS
LOW PROFILE TRANSMISSION JACKS
• Universal adjustable saddle with four brackets that can be lined up with
transmission pan configurations
• Two safety chains and adjustment hardware secure the transmission to the
jack's saddle
• Wide chassis for load distribution and stability
• Slow controlled lowering of load by a conveniently located release
valve knob
• Four conveniently located grab handles for jack repositioning
7750B
7750B - 1200 LB.

7740B - 2000 LB.
7752C - 1-1/2 TON
7040B 7752C
C
CAPACITY LOW HEIGHT HIGH HEIGHT SADDLE TILT SADDLE TILT CHASSIS OVERALL SHIPPING
MODEL #
(LBS.) (IN.) (IN.) FORE AND AFT SIDE TO SIDE LENGTH (IN.) WIDTH (IN.) WEIGHT (LBS.)
7750B 1200 6 31.5 56° by 10° +10°, -15° 37 18.75 140
7740B 2000 6.5 31.5 79° by 9° +10°, -18° 37.5 18.5 143
7752C 1.5 ton 8.62 36.62 16° by 15° +11°, -11.5° 43.5 26 300
300 LB CLUTCH JACK

All-new clutch jack handles clutches and flywheels up to 300 lbs.
Includes both 1.75" and 2.0" spline shafts.
• 11.3" min height among the lowest on the market for easier access
under vehicle during clutch jobs
• 2 foot wide stance for stability while transporting clutch side to side
• Includes 1.75" and 2.0" spline shafts (10" lengths)
7790
CAPACITY LOW HEIGHT HIGH HEIGHT STROKE LENGTH WIDTH SHIPPING

MODEL #
(LBS.) (IN.) (IN.) (IN.) (IN.) (IN.) WEIGHT (LBS.)
7900 300 11.3 38.6 27.3 41.1 24.0 132
SUNEX TOOLS
BOTTLE JACKS - LIFTING 187
FULLY WELDED BOTTLE JACKS

• Fully welded base prevents oil leakage over time and improves durability
• Built-in safety valve protects against dangerous ram overextension
• Extension screw adjusts to desired work height for added reach
4402 - 2 TON
4404 - 4 TON
4406 - 6 TON
4408 - 8 TON
4412 - 12 TON
4412 - 12 TON SHORT
4420AH
4420 - 20 TON
4420S - 20 TON SHORT
4420AH - 20 TON AIR/HYDRAULIC
4430 - 30 TON
4450 - 50 TON
LOW HEIGHT HIGHT HEIGHT BASE WIDTH BASE LENGTH OVERALL HANDLE SHIPPING
MODEL # CAPACITY (TONS)
(IN.) (IN.) (IN.) (IN.) HEIGHT (IN.) LENGTH (IN.) WEIGHT (LBS.)
4402 2 7.1 13.6 3.9 3.66 7.1 11 5.95
4404 4 7.6 14.7 4.33 4.06 7.6 11 7.5
4406 6 8.3 16.3 4.8 4.53 8.3 11 4.92
4408 8 9.1 18.1 5.2 4.72 9.1 13.5 12.57
4412 12 9.1 18.3 5.71 4.96 9.1 16.5 16.09
4412S 12 - Short 7.5 14.4 5.71 4.96 7.5 16.54 14.33
4412AH 12 9.1 17.6 8.07 5.91 9.1 25.5 27.56
4420 20 9.5 17.9 6.42 5.63 9.5 16.5 23.59
4420S 20 - Short 9.5 13.8 6.42 5.63 7.5 16.5 17.64
4420AH 20 9.5 18 8.66 6.89 9.5 25.5 34.17
4430 30 10.8 17.3 6.81 6.02 10.8 16.5 30.86
4450 50 10.4 16.7 8.27 6.93 10.4 16.5 57.32
SUNEXTOOLS.COM
188 LIFTING - JACK STANDS
RATCHETING JACK STANDS (PAIR)
Used in pairs for supporting automotive vehicles after lifting.
• Four legged steel base with pads for stability

• Ductile iron support column with ratchet teeth provides multiple height positions
• Self-locking handle and pawl secure column in place
• Large saddles with locating lugs provide support. The 6 ton saddle includes a
recess for acceptance of a vehicle panel rail
1003 - 3 TON
1003AJ - 3 TON ALUMINUM JACK 1003
1006 - 6 TON
1012 - 12 TON
1003AJ 1006 1012
CAPACITY LOW HEIGHT HIGH HEIGHT SHIPPING

MODEL # BASE (IN.)
(TONS) (IN.) (IN.) WEIGHT (LBS.)
1003 3 11.625 16.75 7.25 x 8.06 16
1003AJ 3 10.6 15.4 7.1 Dia. 10
1006 6 15.75 24 10.375 x 11.5 32.5
1012 12 19.5 30 12.5 x 14.75 75
PIN TYPE JACK STANDS (PAIR)

Used in pairs for supporting trucks, trailers, and equipment in fleet garages,
agricultural, industrial, and construction environments.
• Four leg steel base and support tube made of heavy schedule pipe for
added strength and stability
• Multiple hole locations in the support tube make pin facilitated height
adjustment quick and easy
• Height adjustment pin is attached to stand and to prevent loss
• Large saddle with locating lugs support and position vehicle frame
• Model 1522 stands have a flat base with telescopic tubes and modified 1210
V-shaped saddle to cradle axles or other under truck components
1210 - PAIR OF 10 TON LOW HEIGHT

1310 - PAIR OF 10 TON MEDIUM HEIGHT
1410 - PAIR OF 10 TON HIGH HEIGHT
1522 - PAIR OF 22 TON
1310 1410 1522
HEIGHT SHIPPING
MODEL # CAPACITY (TONS) LOW HEIGHT (IN.) HIGH HEIGHT (IN.) BASE (IN.) SADDLE SIZE (IN.)
INTERVALS (IN.) WEIGHT (LBS.)
1210 10 11 17.3 4 x 1.5 12.2 x 12.2 3.1 x 5.1 59.5
1310 10 18.9 29.9 7 x 1.5 16.9 x 16.9 3.1 x 5.1 93.6
1410 10 28.1 46.5 10 x 2 15.7 x 15.7 3.1 x 5.1 115.6
1522 22 11.8 19.7 3 x 3.1 10 x 10 2.3 x 3.5 72.7
SUNEX TOOLS
UNDERHOIST STANDS - LIFTING 189
20 TON TRAILER STABILIZING STAND

Designed to stabilize and assist in supporting the front or rear of a
tractorless trailer. Sold individually but intended to be used as pairs.
• 14" Diameter base for stability

• Easy turning spin handle and course threaded 1.5" diameter
adjustment screw provide strength and fine adjustment
• Saddle made of aggressive diamond plate pattern to grip load
• Required by OSHA to support loaded or unloaded trailers
1622
RAISED HEIGHT SHIPPING

MODEL # CAPACITY (TONS) LOW HEIGHT (IN.) BASE (IN.) SADDLE SIZE (IN.)
(IN.) WEIGHT (LBS.)
1522 20 39 50.5 14 dia. 4.5 x 5 55
1500 LB UNDERHOIST SUPPORT STAND

Designed to support vehicle components only and ideal for
exhausted system installations and shock absorber replacement.
• 12" Diameter base for stability and slender design for lightweight,
easy handling in close quarters
• Bearing mounted spin handle and self-locking Acme™ threaded
screw provide easy turning and height adjustment under load
• Contoured saddle supports most component configurations
6809
1500 LB UNDERHOIST SUPPORT

STAND WITH FOOT PEDAL
6810
6809
2 TON TRIPOD UNDERHOIST
SUPPORT STAND
Designed to support and stabilize a vehicle on an in-ground or
6810 above-ground lift.
• 24" Triangular base balances stability with a small footprint

• Smooth bearing-mounted spin handle glides on an Acme™
thread and provides 8" of height adjustment
6808BD
• Contoured saddle supports most vehicle frame components
6808BD
LOW HEIGHT RAISED HEIGHT SADDLE SIZE SHIPPING
MODEL # CAPACITY (LBS.) BASE (IN.)
(IN.) (IN.) (IN.) WEIGHT (LBS.)
6809 1500 53 79 12 dia. 1.625 x 5.5 29
6810 1500 53 79 12 dia. 1.625 x 5.5 33
6808BD 2 ton 68 76 24 triangle 3.25 x 3.25 35
SUNEXTOOLS.COM
190 LIFTING - TRUCK EQUIPMENT
BRAKE DRUM HANDLER
Designed for removing, installing, and transporting outboard mounted brake
drums and inboard mounted drums with disc wheel hubs found on most class
7 and 8 tractor and trailer brake systems.
• Handles 15" and 16.5" brake drums without having to manually lift them
• 8" Diameter rubber wheels make maneuverability easy
• Adjustable angle bracket secures drum to the handler
• Drive screw with machine handle quickly raises and lowers handler’s carriage
• Removable handle for easy storage V-shaped saddle to cradle axles or other
under truck components
1330
HIGH LIFT HEIGHT OVERALL LENGTH SHIPPING WEIGHT
MODEL # LOW HEIGHT (IN.) OVERALL WIDTH (IN.) WHEEL DIA. (IN.)
(IN.) (IN.) (LBS.)
1330 10.25 15.25 63 20.5 8 62
20 TON WIDE TRUCK RAMPS (PAIR)

Designed to elevate the front or rear of a truck to gain access to frame and
components.
• Accepts tire widths up to 16"

• Telescopic T-handle extends to expose wheels for easy maneuverability
and retracts for storage
• Rubber surface base prevents slippage when truck drives up or off ramps
• Perforated holes in ramps for tire traction recess for acceptance of a vehicle
panel rail
1520
OVERALL LENGTH OVERALL HEIGHT HANDLE LENGTH SHIPPING WEIGHT

MODEL # CAPACITY (TONS) OVERALL WIDTH (IN.)
(IN.) (IN.) (IN.) (LBS.)
1520 20 per pair 50.5 18.375 9.25 34 320
1500 LB. HYDRAULIC WHEEL DOLLY

For the removal, installation, and transportation of single, tandem, and duplex
tire and wheel combinations.
• Hydraulically activated lift arms handle wheel assemblies up to 52" diameter

• Frame with tilt feature aligns lift arms with spindle angle
• Three ball bearing mounted caster wheels provide stability and easy maneuverability
• Bearing mounted lift arms easily rotate vehicle rim for bolt pattern alignment
1501
LIFT ARM
CAPACITY LIFT RANGE LIFT ARM OVERALL OVERALL OVERALL SHIPPING
MODEL # SPREAD MIN/
(LBS.) (IN.) LENGTH (IN.) LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) WEIGHT (LBS.)
MAX (IN.)
1501 1500 0 to 9.25 26 21 to 25 31 43 35 170
SUNEX TOOLS
ENGINE CRANES/STANDS - LIFTING 191
1/1.5/2 TON ENGINE CRANE

Dual pump piston design is 25% faster than other single pump designs.
Folding ability stores away in small area.
• Dual pump pistons rapidly reach max height 25% faster than single
pump designs
• Low profile 4.7 inch legs designed to fit under wide range of vehicle
frames including sports cars
• 4 boom positions adjust for optimal reach based on required capacity
• Drop forged steel hook swivels 36 degrees for ease of use and safety
during operations, while chainless design eliminates sway during lifting
• Space saving design folds to conveniently store away in small footprint
5222
5221 - 1 TON WITH DUAL PUMP PISTONS
5218 - 1.5 TON
5222 - 2 TON WITH DUAL PUMP PISTONS
5218 5221
CAPACITY (TONS) BOOM MIN. HEIGHT (IN.) BOOM MAX. HEIGHT (IN.) BOOM BOOM LENGTH (IN.) BOOM SHIPPING
MODEL # POSITIONS: POSITIONS: POSITIONS: POSITIONS: WEIGHT
1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4 (LBS.)
5221 1/4, 1/2, 3/4, 1 0, 0, 4.7, 11 92.5, 87.2, 81.9, 76.6 49.6, 42.5, 35.4, 28.5 157
5218 3/8, 3/4, 1-1/8, 1-1/2 0, 0, 5.5, 11.75 96.5, 90.5, 84.5, 78.5 48, 41.5, 34, 27 218
5222 1/2, 1, 1-1/2, 1 0, 0, 5.5, 11.7 96.5, 90.5, 84.5, 78.5 48, 41.5, 34, 27 225
3/4 TON ENGINE SLING

Used with an engine crane to handle and position engines and heavy shop loads.
• Turn the bearing mounted hand crank to compensate for off-balanced loads
or at a required angle for engine alignment
• Four chains and mounting brackets included
5208A
OVERALL LENGTH SHIPPING WEIGHT
MODEL # CAPACITY (TONS)
(IN.) (LBS.)
5208 3/4 Ton 18 14.3
ENGINE TRANSVERSE BAR

WITH ARM SUPPORT
Designed to support engine inside vehicle engine compartment for repairs of
front wheel drive cars and replacement of motor mounts.
• The transverse bar can be used alone for 2 point applications or with adapter
arm for applications requiring additional support
• Two 14" long adjustable hook screws and 1/8" diameter steel cable 38"
long included
• Fully adjustable transverse bar and adapter arm for multiple engine configurations
• Transverse bar extends from 34.5" to 61"
- Shipping Weight: 25.24 Lbs.
5207
SUNEXTOOLS.COM
192 LIFTING - ENGINE CRANES/STANDS
3/8 TON CAPACITY ENGINE STAND
• Sturdy 4 leg design for maximum stability supports engines up to 750 pounds
• Fully adjustable mounting head and adapter fingers
• Long handle rotates mounting head
• Two rigid rear caster wheels and two front ball bearing mounted swivel caster
wheels for easy maneuverability
8750 - 750 LB.
1/2 TON CAPACITY FOLDABLE

ENGINE STAND 8750
Used for handling and positioning of most automotive engines requiring repair
or rebuild.
• 63 to 1 ratio gearbox easily rotates engine to desired position by turning

a crank handle
• Worm drive gearbox is self-locking in any position
• Space saving foldable design for storage
• Two rigid rear caster wheels and two front ball bearing mounted swivel caster
wheels for easy maneuverability. Swivel caster wheels include locks to prevent
stand from moving
• Four wheel design base provides stability
8300GB
8300GB
5/8 TON FOLDABLE ENGINE STAND

Same use as the model 8300GA without the gear driven head.
• Folds into storage position easily by removing one detent pin

• Mounting head locks into position using a detent pin and has a long handle
for rotation
• Two rigid rear caster wheels and a single swivel caster wheel make
maneuvering easy when in the storage position. Two additional locking 8259
swivel caster wheels provide stability and prevent the stand from moving
when engine is mounted
8259 - 5/8 TON FOLDABLE
1 TON ENGINE STAND

• 8 locking positions secure the engine at multiple angles for different applications
• Folding design conveniently stores away in a crowded shop or garage
• Slotted finger mounts to fit most engines
• Thick, reinforced mounting plate measures 3/4" thick ensuring a secure hold
8400 - 1 TON 8400
SHIPPING
MODEL # CAPACITY (TONS) OVERALL LENGTH (IN.) OVERALL WIDTH (IN.) OVERALL HEIGHT (IN.)
WEIGHT (LBS.)
8750 .375 33.85 31 34.5 55
8300GB .5 34.25 36.5 36 96
8259 .625 31.88 32.5 34.5 77.6
8400 1 41.7 28.5 33.1 181
SUNEX TOOLS
WHEEL DOLLIES - LIFTING 193
OIL DRIP PAN FOR ENGINE STAND

For use on engine stands with T or I shaped bases. Plastic pan cradles
base and collects fluid drippings from engine assemblies.
-Shipping Weight: 2 Lbs.
8300DP
1500 LB. WHEEL DOLLY

• Sturdy ratcheting mechanism is lighter and more reliable
• Safety locking casters secure the vehicle
• Enhanced portability with built in handle
• Diamond plated foot pedal for limited slippage
7708
WHEEL DOLLY RACK

• Secures up to 4 car dollys
• 4-wheel design stores away conveniently in small spaces
• 300 lb. capacity
• Built to last
- Shipping Weight: 23.8 Lbs.
7709
Sold separately from 7708
SHIPPING
MODEL # CAPACITY (TONS) MAX TIRE WIDTH (IN.) WORKING RANGE (IN.)
WEIGHT (LBS.)
7708 .75 12.8 13.4 x 27.9 34.7
4 OR 8 TON HEAVY DUTY FLAT BOTTOM RAM

Used for farm applications but primarily for OEM applications in the manufacturing
of engine cranes and handling equipment requiring long hydraulic stroke.
• Ductile iron base for added strength

• Electrostatic paint for rust prevention
• Larger ram diameters to withstand side loads
• Hydraulic bypass system prevents over extension of ram
• Models 5041B and 5081B have a flat base but can be converted to a pivot
base by using the model 5085 pivot base adapter (sold separately)
5041B - 4 TON
5081B - 8 TON
SUNEXTOOLS.COM
194 LIFTING - ATV/MOTORCYCLE LIFT
3/4 TON ATV/MOTORCYCLE LIFT
Used for raising exposed frame undercarriages of ATVs and motorcycles for
cleaning, minor servicing, and accessory installation.
• Foot activated pump and release pedal provide hands free operation
• Release pedal has metered control of lowering speed
• Integrated locking device automatically adjusts to different lift heights
and provides added safety
• Non-slip rubber lifting pads protect vehicle frame from scratching
• Fixed front wheels, rear bearing mounted swivel casters, and a
long T handle provide easy maneuverability under load
• Two nylon tie downs secure vehicle to the lift pads
6616
OVERALL LENGTH SHIPPING

MODEL # CAPACITY (TONS) LOW HEIGHT (IN.) HIGH HEIGHT (IN.) (IN.) OVERALL WIDTH (IN.) WEIGHT (LBS.)
6616 3/4 4 19 38.18 18.5 94.6
AIR/HYDRAULIC FOOT PUMP

WITH 10,000 PSI CAPACITY
For use with single acting cylinders up to 50 ton capacity and reduces pumping
time and effort by depressing a foot/hand pedal.
• 90 PSI air pressure develops 10,000 PSI hydraulic pressure

• Foot pump provides hands-free pumping and release of load
• Designed to be used with single acting cylinders only
• Features an internal overload valve and durable aluminum reservoir
• Release lock function enables pedal to be locked in the released position
without having to depress and hold the pedal
• Hydraulic filter prevents contaminants from entering into the hose and ram
and also from returning into the pump
4998
HYDRAULIC AIR INPUT RANGE USABLE OIL FLOW RATE, NO FLOW RATE, WITH AIR THREAD
MODEL # CAPACITY (PSI) (PSI) CAPACITY (CU. IN.) LOAD (CU. IN./MIN.) LOAD (CU. IN./MIN.) CONNECTION (NPT)
4998 10,000 90 to 175 98 42 8.5 1/4
HYDRAULIC THREAD
CONNECTION (NPT) VALVE FUNCTION LENGTH (IN.) WIDTH (IN.) HEIGHT (IN.) SHIPPING WEIGHT (LBS.)
3/8 Advance/Hold/Retract 10.312 5.312 7.312 19
SUNEX TOOLS
PORTABLE HYDRAULIC POWER KITS - LIFTING 195
4 TON PORTABLE HYDRAULIC POWER KIT

A complete starter set primarily for collision repair work and can be used for
spreading, bending, pushing, and clamping operations.
• Slip fit design provides easy and quick changing of attachments

• Quick disconnect hydraulic fittings on hose and rams
• Attachments are interchangeable with many other popular brand kit
components
• Thread protector on cylinder
• Blow molded storage case for ease of carrying
-Kit Shipping Weight: 43 Lbs.
4940A
SPECIFICATIONS AND PARTS INCLUDED:

B. HOSE
PART # DESCRIPTION PART # DESCRIPTION
A RS4TP Pump (Incl. hose), 7,242 PSI K RS4T03 Flat Base
A. PUMP B RSHS Hose L RS4T04A .5 Ton Ram Toe
D. SPREADER
C. RAM
C RS4TR 4 Ton Ram M RS4T05 .5 Ton Plunger
D RSSPR .5 Ton Spreader N RS4T06 Wedge Head
E RS10T01 Case O RS4T07 V-Base
F RS4T02.1 3.23" (82mm) Long Extension Tube P RS4T08 Male Connector
G RS4T02.2 5.04" (128mm) Long Extension Tube Q RS4T09 Serrated Saddle
H RS4T02.3 8.5" (216mm) Long Extension Tube R RS4T10 .5 Ton Rubber Head
I RS4T02.4 16.5" (420mm) Long Extension Tube S RSPG Pressure Gauge
J RS4T02.5 19.49" (495mm) Long Extension Tube
10 TON PORTABLE HYDRAULIC POWER KIT

-Kit Shipping Weight: 72.6 Lbs.
4910A
SPECIFICATIONS AND PARTS INCLUDED:

PART # DESCRIPTION PART # DESCRIPTION
A RS10TP Pump (Incl. hose), 7,242 PSI J RS4T03 Flat Base
B. HOSE B RSHS Hose K RS4T04A .8 Ton Ram Toe
C RS10TR 4 Ton Ram L RS4T05 .8 Ton Plunger
A. PUMP D RSSPR .5 Ton Spreader M RS4T06 Wedge Head
D. SPREADER
C. RAM
E RS10T01 Case N RS4T07 V-Base

RS10T01WH Wheel w/ Hardware for Case O RS4T08 Male Connector
F RS10T02.1 4.33" (110mm) Long Ext. Tube P RS4T09 Serrated Saddle
G RS10T02.2 10.43" (265mm) Long Ext. Tube Q RS4T10 1Ton Rubber Head
H RS10T02.3 14.37" (365mm) Long Ext. Tube R RSPG Pressure Gauge
I RS10T02.4 20.47" (520mm) Long Extension Tube
SUNEXTOOLS.COM
Impact Wrenches ...................... Pg 198 Drills ......................................... Pg 217
Grinders.................................... Pg 204 Sanders / Polishers ................... Pg 218
Riveters .................................... Pg 209 Spraying ................................... Pg 220
Air Hammers ............................ Pg 210 Specialty................................... Pg 221
Needle Scalers.......................... Pg 212
Cut Off Tools ............................. Pg 213
Air Ratchets .............................. Pg 215
Sunex Air Tools carry a Two Year
Warranty. During this warranty
period, Sunex Tools will repair or
replace at our option any part or
unit which proves to be defective
in material or workmanship.
AIR TOOLS
Drilling. Driving. Grinding. Hammering. We know a
lot goes on during your work day, and we set out to
make things easier with our complete line of Sunex
Air Tools. Our product development and engineering
experts work tirelessly to produce and design Air Tools
that provide the best power, flexibility and value—all
to help you deliver your best work on the job. From
Impact Wrenches and Drills, to Grinders and Ratchets,
Sunex Air Tools are guaranteed to perform.
198 AIR TOOLS - IMPACT WRENCHES
3/8" DRIVE PALM GRIP IMPACT WRENCH
• Advanced design clutch for smooth operation and
extreme durability
• Butterfly paddle design throttle for easy directional control
• Built-in regulator and 360° swivel for great control and easy handling
SX111
SPECS SIZE
Square Drive (in.) 3/8
Max. Torque (ft. lbs.) @ 90 PSI 75
Working Torque (ft. lbs.) 30-60
Free Speed (RPM) 10,000
Weight (lbs.) 2.5
Length (in.) 6.25
Average Air Consumption (CFM) 4
Air Inlet Thread-Size (NPTF) 1/4
Min. Hose Size (I.D.) 3/8
Sound Level (dBA) 110
3/8" DRIVE SUPER DUTY

MINI IMPACT WRENCH
• Powerful jumbo hammer mechanism produces 450 ft-lbs of
breakaway torque
• Ultralight weight reduces user fatigue
• Compact stubby design measures only 4.29", ideal for tight places
• Convenient forward/reverse switch can be operated with one hand
and provides efficient airflow
SXMC38
SPECS SIZE
Breakaway Torque (ft. lbs.) 450
Weight (lbs.) 2.9
Length (in.) 4.29
Average Air Consumption (CFM) 3.76
SUNEX TOOLS
IMPACT WRENCHES - AIR TOOLS 199
3/8" DRIVE COMPOSITE IMPACT WRENCH

• Durable yet lightweight composite housing design
• One hand forward/reverse design
• Variable speed trigger for precise speed control
SX4335
SPECS SIZE
Weight (lbs.) 2.75
Length (in.) 6
3/8" DRIVE PISTOL GRIP IMPACT WRENCH

• Reliable rocking dog clutch
• Built-in regulator for power and speed control
SX821A
SPECS SIZE
Weight (lbs.) 2.6
Length (in.) 5.5
SUNEXTOOLS.COM
1/2" DRIVE SUPER DUTY
MINI IMPACT WRENCH
• Powerful jumbo hammer mechanism produces 500 ft-lbs of
breakaway torque
• Ultralight weight reduces user fatigue
• Compact stubby design measures only 4.29", ideal for tight places
• Convenient forward/reverse switch can be operated with one hand
and provides efficient airflow
SXMC12
SPECS SIZE
Weight (lbs.) 2.9
Length (in.) 4.29
1/2" DRIVE PREMIUM IMPACT WRENCH

• Powerful twin hammer mechanism produces 500 ft-lbs of torque
• Reverse bias technology increases torque in reverse ensuring the
removal of lugs
• Adjustable power regulation provides control for various applications
SX231P
SPECS SIZE
Weight (lbs.) 5.9
Length (in.) 7.4
SUNEX TOOLS
1/2" DRIVE PREMIUM IMPACT WRENCH

WITH 2" EXTENDED ANVIL
• Powerful twin hammer mechanism produces 500 ft-lbs of torque
• Reverse bias technology increase torque in reverse ensuring the
removal of lugs
• Adjustable power regulation provides control for various applications
SX231P-2
SPECS SIZE
Weight (lbs.) 6.2
Length (in.) 9.4
1/2" DRIVE SUPER DUTY IMPACT WRENCH

• Three forward speeds and one in reverse
SX4348
SPECS SIZE
Weight (lbs.) 4.2
Length (in.) 7.38
SUNEXTOOLS.COM
• Composite housing provides a durable and lightweight design
• One hand forward/reverse
SX4345
SPECS SIZE
Weight (lbs.) 4.3
Length (in.) 7.25

• Composite housings provide a durable and lightweight design
• One hand forward/reverse
SX4355
SPECS SIZE
Max. Torque (ft. lbs.) @ 90 PSI 1,400
Working Torque (ft. lbs.) 200-1,100
Weight (lbs.) 7.55
Length (in.) 8.5
SUNEX TOOLS
1" DRIVE LIGHTWEIGHT SUPER DUTY

IMPACT W/ 6" EXT. ANVIL
• Only 15.9 lbs. and 1,600 ft. lbs. of torque gives it great power in
a small lightweight package
• Ergonomic back handle allows you to work longer, not harder
• Three forward and three reverse settings give you ultimate power
control in both directions
• Side exhaust keeps air away from the operator and work area
SX4360-6
SPECS SIZE
Square Drive (in.) 1
Weight (lbs.) 15.9
Length (in.) 18.38
1" DRIVE IMPACT WRENCH W/ 6" EXT. ANVIL

• Rocking dog mechanism provides a reliable design
• All aluminum housing for unmatched durability
• Three forward and three reverse power settings
SX556-6
SPECS SIZE
Square Drive (in.) 1
Weight (lbs.) 26.2
Length (in.) 22.5
Sound Level (dBA) 98.8
SUNEXTOOLS.COM
204 AIR TOOLS - GRINDERS
HEAVY DUTY ANGLE GRINDER
• High torque motor for outstanding performance in all conditions
• Hardened and ground spiral bevel gears for low vibration
• Lock off throttle for extra safety
SX211A
SPECS SIZE
Wheel Size (in.) 4
Spindle Size (in.) 3/8-24
Weight (lbs.) 3.6
Length (in.) 9
Includes: 4" disc wheel
Replacement disc wheel RS21134
.3 HP MINI AIR DIE GRINDER

• Compact, lightweight design for easy maneuverability in tight areas
• Built-in speed regulator
SX231B
SPECS SIZE
Collet Size (in.) 1/4
Weight (lbs.) 0.8
Length (in.) 5.13
Horsepower (HP) 0.3
SUNEX TOOLS
GRINDERS - AIR TOOLS 205
2 PC MINI DIE GRINDER SET

• Compact design improves accessibility
• Variable speed tip valve throttle provides accurate speed
• Lightweight construction with powerful results
SX300 - Includes SX301B & SX307B

SPECS SX301B SX307B
Collet Size (in.) 1/4 1/4
Free Speed (RPM) 22,000 28,000
Weight (lbs.) 1.1 0.8
Length (in.) 5.1 5.1
Average Air Consumption (CFM) 4.5 4.5
Air Inlet Thread-Size (NPTF) 1/4 1/4
Air Pressure (PSIG) 90 90
Min. Hose Size (I.D.) 3/8 3/8
Sound Level (dBA) 97 97
Horsepower (HP) 0.25 0.25
.45 HP MEDIUM DIE GRINDER

• Rear exhaust directs air away from work surface
SX230B
SPECS SIZE
Weight (lbs.) 1.2
Length (in.) 6.75
Horsepower (HP) 0.45
.3 HP MINI ANGLE DIE GRINDER

• Overmold grip for extra comfort
• Muffled design for low noise
SX5203
SPECS SIZE
Weight (lbs.) 1.1
Length (in.) 6.1
Horsepower (HP) 0.3
SUNEXTOOLS.COM
.25 HP MINI RIGHT ANGLE DIE GRINDER
• Compact, lightweight design for easy maneuverability in tight areas
• 90˚ head allows flexibility in many applications
SX264
SPECS SIZE
Weight (lbs.) 1
Length (in.) 5.5
.25 HP MINI RIGHT ANGLE DIE GRINDER KIT

• Convenient blow molded storage case
SX264K SET OF 23
SPECS SIZE
Collet Size (in.) 1/4 & 1/8
Weight (lbs.) 1
Length (in.) 5.5
Includes: (1) SX264 Mini Right Angle Die Grinder, (2) Spanner wrenches, (1) 1/8"
(3mm) Collet, (5 pc.) 1/8" (3mm) Shank grinding stones, (5 pc.) 1/4" (6mm) Shank
grinding stones, (1 each) 2" & 3" Backing pads, (4 each) 2" & 3" Abrasive discs, (2)
Screw posts, (1) Arbor
SUNEX TOOLS
GRINDERS - AIR TOOLS 207
.3 HP ANGLE AIR DIE GRINDER

• 90˚ head for restricted areas
• Rear exhaust directs air away from work surface
SX232B
SPECS SIZE
Weight (lbs.) 1
Length (in.) 6.38
Horsepower (HP) 0.3
.5 HP RIGHT ANGLE DIE GRINDER

• 0.5 HP motor for added power
• Speed control dial for setting speed to the application
• Composite handle for lightweight comfort
SX5206
SPECS SIZE
Weight (lbs.) 1.5
Length (in.) 7
Horsepower (HP) 0.5
SUNEXTOOLS.COM
1.0 HP DIE GRINDER
• Full 1.0 HP motor to power through the toughest jobs
• Erikson industrial collet to secure accessories under high torque
• Composite handle for lightweight comfort
SX5210
SPECS SIZE
Weight (lbs.) 1.7
Length (in.) 7.4
Horsepower (HP) 1.0
PENCIL DIE GRINDER SET

• Built-in regulator
• Convenient blow molded storage case
SX245K SET OF 10
SPECS SIZE
Weight (lbs.) 2
Length (in.) 5.5
Includes: (1) - SX245 - 54,000 RPM Pencil Die Grinder, (10) - 1/8" Shank stones,
(2) - 9mm Wrenches, (1) - 1/4" Coupler, (1) Air tool oil bottle, (1) Oiler
SUNEX TOOLS
RIVETERS - AIR TOOLS 209
3/16" HEAVY DUTY RIVET GUN

• Features a pulling (traction) power of 1,983 ft. lbs.
• Sets all conventional, standard, structural blind rivets, monobolts,
and t-rivets up to and including 3/16" diameter in all materials
• Comes with nose pieces in 3/32", 1/8", 5/32", and 3/16" sizes
• Forged aluminum handle
• Nose pieces stored conveniently underneath base of gun
SX0918T
SPECS SIZE
Rivet Capacity (in.) 3/16
Traction Power (ft. lbs.) 1,983
Air Pressure (PSI) 75-90
Stroke Length (in.) 11/16
Height (in.) 12-3/8
Weight (lbs.) 3.5
Air Inlet Thread Size (NPTF) 1/4
Includes: blow molded storage case and nose pieces
1/4" HEAVY DUTY RIVET GUN

• Comes with nose pieces in 3/16" and 1/4" sizes
SX1819T
SPECS SIZE
Height (in.) 12-9/16
Weight (lbs.) 5.5
SUNEXTOOLS.COM
210 AIR TOOLS - RIVET GUN & AIR HAMMERS
1/4" HEAVY DUTY VACUUM RIVET GUN
• Features a patented vacuum system to allow ease of use in all positions
• Comes with nose pieces in 3/16" and 1/4" sizes
SX1819TV
SPECS SIZE
Height (in.) 12-9/16
Weight (lbs.) 5.3
SHORT BARREL AIR HAMMER

• Quick change retainer spring
• All aluminum housing for durability
SX235KTB
SPECS SIZE
Shank Opening (in.) .401
Blows Per Minute (BPM) 4,500
Bore Diameter (in.) 11/16
Piston Stroke (in.) 1-5/8
Weight (lbs.) 2.6
Length (in.) 5.25
Min Hose Size (I.D.) 3/8
Includes: 3 piece chisel set

Optional quick change chuck - RS248025
Replacement quick change retainer spring - RS87301
SUNEX TOOLS
AIR HAMMERS - AIR TOOLS 211
MEDIUM BARREL AIR HAMMER

• Accepts .401" Parker taper shank chisels
• Quick change retainer spring
SX275B
SPECS SIZE
Weight (lbs.) 3.4
Length (in.) 6.75

Replacement quick change retainer spring - RS87301
HEAVY DUTY LONG BARREL AIR HAMMER

• Hard hitting long barrel design provides great power
• Comfort rubber grip
• Quick change chisel retainer for fast changes
SX243
SPECS SIZE
Weight (lbs.) 4.6
Length (in.) 8.88
SUNEXTOOLS.COM
212 AIR TOOLS - HAMMERS/ NEEDLE SCALERS
PISTOL GRIP NEEDLE SCALER
• Perfect for surface prep work involving the removal of rust,
paint, weld slag, etc.
• Lightweight aluminum housing
• Hardened steel casing and 1/8" hardened steel needles
• Pistol design for comfort and control
SX246
SPECS SIZE
Needle Diameter (in.) 1/8
Needle Quality 19
Weight (lbs.) 5.7
Length (in.) 10.25
Replacement needle - RS24623

Needles sold individually (19 needed to operate this tool)
STRAIGHT NEEDLE SCALER

• Perfect for surface prep work involving the removal of rust,
paint, weld slag, etc.
• Hardened steel casing and 1/8" hardened steel needles
• Straight design for limited access areas
SX247
SPECS SIZE
Needle Diameter (in.) 1/8
Needle Quality 19
Weight (lbs.) 4
Length (in.) 11.25
Replacement needle - RS730280

Needles sold individually (19 needed to operate this tool)
Flux Chipper Attachment -

SX247FC
SUNEX TOOLS
SAWS/CUT OFF TOOLS - AIR TOOLS 213
3" UTILITY CUT-OFF TOOL

• Lightweight at 1.6 lbs. but with the power to cut all types
of materials
• Rear exhaust directs air away from the work surface
SX233A
SPECS SIZE
Wheel Size (in.) 3
Weight (lbs.) 1.6
Length (in.) 7.38
Includes: 3" cutting wheel

Replacement wheels (set of 5) - 87602
3" REVERSIBLE CUT-OFF TOOL

• Reversible dial allows user to control the spark direction
• Muffled design for low noise
• Composite grip for lightweight comfort
SX6210
SPECS SIZE
Wheel Size (in.) 3
Weight (lbs.) 2
Length (in.) 8.3
Includes: 3" cutting wheel

Replacement wheels (set of 5) - 87602
SUNEXTOOLS.COM
214 AIR TOOLS - SAWS / CUT OFF TOOLS
METAL SHEAR AIR CUTTING TOOL
• Hardened shear head can cut up to 18 gauge steel
• Planetary gearing for long life and heavy duty use
• Bottom handle diffused exhaust for quiet operation
and keeping air away from work surface
SX227B
SPECS SIZE
Strokes Per Minute (SPM) 2,500
Weight (lbs.) 3
Length (in.) 8.5
Left replacement blade - RS227B17

Right replacement blade - RS227B20
Center replacement blade - RS227B19
5MM PUNCH/FLANGE TOOL

• Heavy duty head turns 360° to easily crimp flanges or lap
joint sheets and pipes
• Turn head 180° to punch a clean, accurate 3/16" hole
for welding fasteners
SX280
SPECS SIZE
Punch Hole Size (in.) 3/16
Punch Hole Size (mm) 5
Cutting Capacity (steel) (in.) 0.05
Cutting Capacity (aluminum) (in.) 0.08
Weight (lbs.) 2.9
Length (in.) 9.84
SUNEX TOOLS
SAWS/CUT OFF TOOLS - AIR TOOLS 215
8MM PUNCH/FLANGE TOOL

• 8mm diameter hole punch/crimp/flange in up to 14 gauge
steel capacity
• Head swivels 360° for great maneuverability
• 7/8" Gap
SX278C
SPECS SIZE
Punch Hole Size (in.) 5/16
Punch Hole Size (mm) 8
Cutting Capacity (steel) (in.) 0.04
Cutting Capacity (aluminum) (in.) 0.07
Weight (lbs.) 3.5
Length (in.) 10
Average Air Consumption (CFM) .025
1/4" DRIVE MINI AIR RATCHET

• Maximum speed control throughout the range
• Small design to get into tight areas
• Rear exhaust to keep air away from work surface
SX106B
SPECS SIZE
Max Torque (ft. lbs.) 25
Free Speed (RPM) 230
Weight (lbs.) 1
Length (in.) 7
Replacement head kit - RSRHK106B
SUNEXTOOLS.COM
216 AIR TOOLS - RATCHETS
3/8" DRIVE AIR RATCHET
• With 45 ft. lbs. of torque and 150 RPM, it can handle
any job quickly and efficiently
• High quality design for longer ratchet head life
• Exceptional quality at an affordable price
SX113
SPECS SIZE
Weight (lbs.) 2.6
Length (in.) 10.5
Replacement head kit - RSRHK100C
3/8" DRIVE PREMIUM AIR RATCHET WRENCH

• Powerful 50 ft. lbs. of torque and 170 RPM
• Lightweight at only 2.65 lbs
• Front handle exhaust optimizes air flow for tool efficiency
• Precision machine beveled gears for a tighter tolerance and
increased durability
SX160
SPECS SIZE
Weight (lbs.) 2.65
Length (in.) 10.24
Air Pressure (PSIG) 90
SUNEX TOOLS
DRILLS - AIR TOOLS 217
3/8" REVERSIBLE AIR DRILL

• Great durability at a value price
• One finger forward/reverse for true one hand operation
• Muffled handle exhaust for quiet operation
SX223
SPECS SIZE
Chuck Size (in.) 3/8
Weight (lbs.) 2.42
Length (in.) 7.6
Includes: 3/8" Jacobs ® chuck and key

Replacement 3/8" Jacobs® chuck with key - RS87106
3/8" REVERSIBLE RIGHT ANGLE AIR DRILL

• Compact, low profile head for hard to reach areas
• Variable speed provides precise speed regulation
• Reverse valve for fast directional changes
SX545B
SPECS SIZE
Weight (lbs.) 2.6
Length (in.) 8
Includes: 3/8" Jacobs ® chuck and key

SUNEXTOOLS.COM
218 AIR TOOLS - DRILLS / SANDERS
1/2" REVERSIBLE AIR DRILL
• Two sets of in-line planetary gears provide maximum low speed
torque for tough jobs
• Variable speed throttle design provides precise speed regulation
• Side handle for added control and comfort
SX221B
SPECS SIZE
Weight (lbs.) 3.6
Length (in.) 8
Includes: 1/2" Jacobs® chuck and key

6" DUAL ACTION ORBITAL AIR SANDER

• Rotary and orbital motion for rapid removal as well as fine finishing
• Built-in regulator for precise speed control
• Insulated grip for additional comfort
SX203N
SPECS SIZE
Pad Size (in.) 6
Weight (lbs.) 4.5
Length (in.) 9.25
Includes: 6" bonded sanding pad

6" Replacement pad - 6PSAPAD
SUNEX TOOLS
SANDERS/ POLISHERS - AIR TOOLS 219
DUAL PISTON STRAIGHT LINE AIR SANDER

• Dual piston design provides stall free performance
• 100% Needle Bearing construction is designed for longer life
• Automatic release trigger for positive stop action
SX288C
SPECS SIZE
Pad Size (in.) 16 x 2.5
Weight (lbs.) 6.6
Length (in.) 16.13
Replacement pad assembly - RS28635A
SURFACE BLASTER KIT

• 180º rotating side handle
• Planetary gear system increases torque to power through tough jobs
• Increased torque power through tough materials
• Complete set to remove rust, gaskets, paint, or pin stripes
SX8200
SPECS SIZE
Spindle Thread Size (mm) 9
Weight (lbs.) 2.7
Length (in.) 10
Includes: (1) Surface blaster tool, (1) Stripping wheel, (1) Rubber eraser wheel,
(1) Hub, (3) Wire wheels (coarse, medium, and fine)
Replacement Stripping Wheel - 8200SW

Replacement Eraser Wheel - 8200REW
Replacement Adapter Set - 8200HUB
Replacement Wire Wheel (Fine) - 8200WWF
Replacement Wire Wheel (Medium) - 8200WWM
Replacement Wire Wheel (Coarse) - 8200WWC
SUNEXTOOLS.COM
220 AIR TOOLS - SPRAY GUNS
GRAVITY FEED SPRAY GUN WITH
1.4MM NEEDLE, NOZZLE, AND CAP SET
• Adjustable spray pattern varies from round jet to full flat jet
• Fine atomization at low air consumption
• Excellent balance with soft trigger action
• Sunex 9091 Mini Regulator with Pressure Gauge included
• 1.4mm fluid orifice
9002B
SPECS SIZE
Recommended Air Pressure (PSI) 43
Inlet Pressure (PSI) 43
Nozzle Pressure 10
Fluid Orifice (mm) 1.4
Optional 2.0 mm needle, nozzle, and cap set - RS9002B2.0

Replacement cup assembly - RS600CCA
GRAVITY FEED SPRAY GUN WITH

1.4MM NEEDLE, NOZZLE, AND CAP SET
• Gravity feed action uses less air and offers increased
control over atomization and fluid output
• Adjustable spray pattern varies from round jet to full flat jet
• Excellent balance with soft trigger action
• Die cast aluminum gun body
• 1.4 mm fluid orifice
9004A
SPECS SIZE
Recommended Air Pressure (PSI) 43
Inlet Pressure (PSI) 50
Nozzle Pressure 25
Optional 2.0 mm needle, nozzle, and cap set - RS9004A2.0

Replacement cup assembly - RS600CCA
SUNEX TOOLS
SPRAY GUNS & SPECIALTY TOOLS - AIR TOOLS 221
HIGH PRESSURE SPRAY GUN 1.4MM NOZZLE

• Nickel plated head and air nozzle
• External breather tube cup
• Adjustable air and paint controls
• Dual action trigger
• Durable black finish
• 1.4mm fluid orifice
• 1000ml cup size
SX76
SPECS SIZE
Recommended Air Pressure (PSI) 50-70
Fluid (water) Delivery (ml/min) 180-240
Nozzle Pressure 50
Replacement cup (no lid) - RS76C

Replacement lid assembly - RS76LA
SPARK PLUG CLEANER

• Cleans all spark plugs
• Compact for easy storage
• Two way valve allows for abrasive blast or clean air
3912
Replacement silica - 3914
Replacement bag - 3915
DUAL FUNCTION POWER VACUUM

AND BLOWER
• Lightweight composite housing
• Great for detail work and media installation
• Non-woven dust bag has zipper for easy debris removal
SX1000
SPECS SIZE
Vacuum Level (mmHg) 7.5
Weight (lbs.) 1.47
Length (in.) 5.7
Min. Hose Size (in.) 5/16
Includes: Flexible extension tube, rotatable brush, crevice attachment, orifice

attachment, and non-woven dust bag
SUNEXTOOLS.COM
222 AIR TOOLS - ACCESSORIES
1/2" DRIVE 4-WAY CHUCK KEY
• Opens 127 different chucks
8727
3/8" DRIVE 4-WAY CHUCK KEY

• Opens 86 different chucks
8737
Chuck keys will open most chucks used

by the following manufacturers:
Aro® Jacobs®
®
Atlas Coco Makita®
Black & Decker® Master Power®
®
Bosch Michigan Pneumatic®
Buffalo® Milwaukee®
®
Chicago Pneumatic Porter Cable®
Copper® Reg®
®
Craftsman Ridgid®
Cushman® Rockwell®
®
Delta Rohm®
Desoutter® Sioux®
®
Dotco Ski®
®
Florida Pneumatic Thor®
Ingersoll Rand® U.S. Air Tool®
3" CUTTING WHEELS - 20,000 RPM

• 3" x 1/16" double reinforced
• Use with 3/8" arbor
• Complies with ANSI B7.1/OSHA regulations
87602 - 5 PIECE
SPECS SIZE
Diameter (in.) 3
Thickness (in.) 1/16
Arbor (dia.) 3/8
Max. RPM 20,000
Shipping Weight (lbs.) 0.2
Do not exceed 20,000 RPMs
SUNEX TOOLS
ACCESSORIES - AIR TOOLS 223
1/4" NPT AIR SWIVEL

• Heavy duty construction
• 360˚ rotation for easy maneuverability
• Safety pin design for precision tool use
SX25
SPECS SIZE
Air Inlet (Male & Female Threads) 1/4
AIR CHISEL
• Canvas pouch for convenience and easy storage
• Made of SCM440 high alloy steel
• Zinc phosphate finish
ACS10 - 10 PIECE
PART NUMBER SIZE
AC03 13/16" Flat Chisel - 7" Length
AC07 Claw Ripper & Panel Cutter - 7" Length
AC08 Tapered Punch - 7" Length
AC10 Straight Punch - 7" Length
AC12 Dual Blade Panel Cutter - 7" Length
AC13 Rivet Cutter - 6-1/2" Length
AC14 1" Standard Hammer - 3-1/2" Length
AC16 Bushing Splitter - 6-1/2" Length
AC18 Muffler Cutter - 8" Length
AC23 5/16" Nut Splitter - 6" Length
SUNEXTOOLS.COM
Shop Seats ............................... Pg 226
Creepers ................................... Pg 227
Bench Grinders ......................... Pg 228
Drill Presses ............................. Pg 229
Pullers ...................................... Pg 230
Magnetic Parts Trays................. Pg 233
1 YEAR
WA R R A N T Y
Sunex Bench Grinders and Drill

Presses are covered by a One-
Year Warranty. During this warranty
period, we’ll repair or replace at
our option any part or unit which
proves to be defective in material or
workmanship.
SHOP EQUIPMENT
As far as a working professional is concerned, time really is
money. That’s what we had in mind when we set out to create
a line of efficient Shop Equipment to optimize your workplace
activity. Sunex offers Bench Grinders, Drill Presses, Creepers,
Shop Seats, Pullers and more. Each piece of equipment is
designed to keep your shop running efficiently, and keep you
closer to the task at hand till the job is done.
226 SHOP EQUIPMENT - SHOP SEATS
CREEPER SEAT
• Cushioned vinyl seat with 2" high compression foam
• Powder coated black frame for long lasting finish
• Includes convenient 1" deep parts tray
8507
SPECS SIZE
MAX. CAPACITY (LBS.) 300
CASTER SIZE (IN.) 2.5
SEAT DIMENSIONS (IN.) 8 X 14
TRAY DIMENSIONS (IN.) 11.5 X 12.5
FRAME DIMENSIONS SIZE
HEIGHT (IN.) 14
LENGTH (IN.) 17
Replacement caster - 8503 (includes 1 caster, 2 inserts, & 2 lock washers)
PNEUMATIC SHOP SEAT

• Air cylinder for easy height adjustment
• Cushioned black vinyl covered wooden seat
• Large steel reinforced tool tray
8509
SPECS SIZE
SEAT DIAMETER (IN.) 12.5
HIGH HEIGHT (IN.) 20.5
LOW HEIGHT (IN.) 15.5
TOOL TRAY
DIAMETER (IN.) 15.25
DEPTH (IN.) 1
Replacement caster - RS8509WH (includes 1 caster, 1 nut, & 1 lock washer)
TRACTOR SEAT
• Air cylinder for easy height adjustment
• Heavy duty, chrome finished casters with rubber treat for ease of mobility
• Large steel reinforced tool tray
• Premium comfort tractor seat
8514
SPECS SIZE
SEAT WIDTH (IN.) 16
HIGH HEIGHT (IN.) 22
LOW HEIGHT (IN.) 18
TOOL TRAY
DIAMETER (IN.) 17
DEPTH (IN.) 1
Replacement caster - RS8515CS (includes 1 caster, 1 nut, & 1 lock washer)
SUNEX TOOLS
CREEPERS - SHOP EQUIPMENT 227
4 CASTER CREEPER
• Powder coated black frame
• Cushioned red vinyl cover
8504
SPECS SIZE
LENGTH (IN.) 36
FRAME DIMENSIONS (IN.) 36 X 17 X 3.5
GROUND CLEARANCE (IN.) 1.75
Replacement caster - 8503 (Includes 1 caster, 2 inserts, & 2 lock washers)
6 CASTER CREEPER
• Powder coated black frame
• Cushioned red vinyl cover with adjustable headrest
8505
SPECS SIZE
LENGTH (IN.) 40
FRAME DIMENSIONS (IN.) 40 X 17 X 4
Replacement caster - 8503 (Includes 1 caster, 2 inserts, & 2 lock washers)
6 CASTER CREEPER
• 40" ergonomically designed frame
• 4-3/4" high vinyl covered foam headrest for maximum comfort
• One storage tray on either side
• A low profile for greater clearance under vehicles
• Made of material that is resistant to most solvents, grease,
and oils found in the common shop
8511
SPECS SIZE
CASTER SIZE (IN.) 3
LENGTH (IN.) 40
Replacement caster - RS8511CS (Includes 1 caster, 2 inserts, & 2 lock washers)
SUNEXTOOLS.COM
228 SHOP EQUIPMENT - SHOP SEATS & GRINDERS
DELUXE COMFORT EXTREME CREEPER
• 1" Rugged steel tube construction
• Oversize frame for added comfort
• Heavy duty chrome finished casters with rubber tread
• Cushioned red vinyl cover with adjustable headrest
• Rear drop frame design for extra leg comfort
8515
SPECS SIZE
CAPACITY (LBS.) 300
LENGTH (IN.) 45.5
WIDTH (IN.) 19
HEIGHT (HEADREST DOWN) (IN.) 5
HEIGHT (HEADREST UP) (IN.) 9.5
BED SIZE (IN.) 30.63 X 16.5 X 2.5
HEADREST SIZE (IN.) 30.5
TAPERED TO 10
HEIGHT
HEIGHT OF HEAD REST (IN.)
(IN.)
POSITION 1 5
POSITION 2 6
POSITION 3 7.5
POSITION 4 8.5
POSITION 5 9.5
Replacement caster - RS8515CS
BENCH GRINDERS WITH LIGHT

• Bright, flexible work light
• Has two grit wheels: coarse 36 and medium 60
• Each wheel has protective spark guard and adjustable eye shield
• Mounting holes and rubber feet make grinder easy to mount on a
stand (optional - part #5003 or 5005A) or use on an approved work
table or workbench
• Cast iron base for durability
• Ball bearing construction for smooth operation
• 1/2" Arbor accepts standard 6" wheel
• UL & CSA Listed and meets OSHA requirements
5001A
5002A
5001A
5002A
0
MODEL # POWER NO LOAD SPEED MOTOR VOLTAGE

5001A 1/2 HP Motor 3450 RPM 3.5 Amp 115V/60Hz
5002A 3/4 HP Motor 3450 RPM 5 Amp 115V/60Hz
Replacement eye shields - RS500119B (5001A), RS500219B (5002A)

Replacement tool rests - RS500135B
SUNEX TOOLS
STAND & GRINDERS - SHOP EQUIPMENT 229
BENCH GRINDER STAND

• Sturdy base with pre-drilled holes for mounting on floors
• Use with 5001A & 5002A and other 6" or 8" bench grinders
5003
SPECS SIZE
BASE MOUNTING AREA (IN.) 10.5 X 7.5
HEIGHT (IN.) 36
PIPE SHAFT DIMENSIONS:
DIAMETER (IN.) 3
HEIGHT (IN.) 26.63
16 SPEED FLOOR UL/CSA DRILL PRESS

• Heavy duty 3/4 HP motor with 5/8" drill capacity
• Convenient belt tension lever for quick speed transition
• Table rotates 360˚ and pivots from 0˚ to 45˚ on each side with indicator
to facilitate settings
• UL & CSA Listed
5000A
SPECS SIZE
POWER 3/4 HP
POWER SOURCE 115V/60HZ
SPEEDS RANGE 200 - 3850 RPM
MAX SPINDLE STROKE (IN.) 3.13
SPINDLE NOSE #2
DIAMETER OF COLUMN (IN.) 2.75
TABLE DIAMETER (IN.) 11.5
HEIGHT (IN.) 61.8
Replacement 5/8" chuck & key - RS5000A87 (Fits standard MT2 Arbor)
SUNEXTOOLS.COM
230 SHOP EQUIPMENT - PULLERS
STEERING WHEEL PULLER
• Specialized puller set for steering wheel, pulley, and flywheel puller
• Works on most GM, Ford, and Chrysler cars
• Can also be used as a two or three way puller to remove pulleys and
flywheel from small engines and snowmobiles
3900
HARMONIC BALANCER PULLER

• Heavy duty flange type puller
• Quickly and easily pulls harmonic balancers, timing gears, and other
parts with bolt circle diameters from 1-1/2" to 4-5/8"
• Works on most automobiles, large and small, foreign and domestic
• Ideal for pulling parts with tapped holes like flywheels, gears,
and pulleys
3901
Diameter Range (in.) 1.5 - 4.625
SPRING COMPRESSOR
• Ideal for removal and installation of auto and light truck coil springs
• Strong steel jaws securely hook into coil springs
• Use on or off the vehicle
• Acme rod turning screws for strength and accurate adjustment
3903
STRUT & COIL SPRING

• Durable plastic coating
• Ideal for removal and installation of auto and light truck coil springs
• Strong steel jaws securely hook into coil springs
• Use on or off the vehicle
3904
SUNEX TOOLS
PULLERS - SHOP EQUIPMENT 231
2 TON CAPACITY 4-WAY,

2-JAW REVERSIBLE PULLER
• Can be assembled with standard or long reach for maximum versatility
• Ideal for pulling smaller gears, bearings, pulleys, and other press fit parts
• Internal or external pulling capacity
3905
SPECS SIZE
MAXIMUM REACH (IN.) 3.375
MAXIMUM SPREAD (IN.) 4

2/3 JAW REVERSIBLE PULLER
• Can be assembled to make a two or three jaw puller with standard
or long reach
• Jaws are reversible to make four styles of puller
• Ideal for pulling smaller gears, bearings, pulleys, and other press fit parts
3906
SPECS SIZE

• Can be assembled to make a two or three jaw puller when additional
stability is needed
• Reversible jaw design for added versatility and a broader range of
pulling capacity
• Ideal for pulling gears, bearings, pulleys, and other press fit parts
3907
SPECS SIZE
MAXIMUM SPREAD (IN.) 4.75

stability is needed
pulling capacity
• Ideal for pulling gears, bearings, pulleys, and other press fit parts
3908
SPECS SIZE
SUNEXTOOLS.COM
232 SHOP EQUIPMENT - PULLERS
10 TON HYDRAULIC GEAR PULLER
• CR-MO alloy steel jaws for greater strength and performance
• Provides up to 10 tons of pulling force with hydraulic ram
• Makes 8 different pulling combinations for total versatility
3909
SPECS SIZE
TOTAL PULLING COMBINATIONS 8
PULLING FORCE (TONS) 10
SLIDE HAMMER PULLER

• Jaws can be set up for 2 or 3 jaw internal or external pulling
• Eases removal of flange-type axles, oil seals, bearings, and other press
fit parts
• Heavy duty steel carrying case
• Puller radius: 1.5mm
3911
SPECS SIZE
5 LB. HEAVY DUTY SLIDE HAMMER REAR AXLE PULLER
8 FUNCTION INT. OR EXT. 3 JAW PULLER DENT PULLER
INTERNAL OR EXTERNAL 2 JAW PULLER SPECIAL GRIP WRENCH ADAPTER: 1.75MM
PULLER HOOK
PILOT BEARING PULLER

• Designed to pull flywheel pilot bearings in confined spaces where
a slide hammer puller cannot be used
• Applicable for use on most models with engine in chassis
3916
SPECS SIZE
JAW SPREAD (IN.) 1 TO 1-1/2
I.D. REACH (IN.) 3/4
SUNEX TOOLS
PULLERS - SHOP EQUIPMENT 233
REVERSIBLE SLIDE HAMMER PULLER

• Versatile puller for pulling applications involving gears, bearings,
outer races, grease retainers, and oil seals
• Reversible 2/3 jaw may be used to perform inside pulling jobs as
well as outside pulling jobs
3918
SPECS SIZE
HAMMER WEIGHT (LBS.) 2-1/2
2/3 WAY HEAD LENGTH (IN.) 27
2 TON 2/3 JAW GEAR PULLER

• Forged from quality, heat treated steel for maximum pulling power
stability is needed
pulling capacity
• Small size allows for pulling power in confined areas
3919
SPECS SIZE
MAXIMUM REACH (IN.) 3-3/8
MAXIMUM SPREAD (IN.) 4-3/4
MINIMUM SPREAD (IN.) 2
MIGHTY MAG ROUND

MAGNETIC PARTS TRAY
8810
SPECS SIZE
DIAMETER (IN.) 3.25
SUNEXTOOLS.COM
234 SHOP EQUIPMENT - MAGNETIC PARTS TRAYS
MIGHTY MAG RECTANGULAR
MAGNETIC PARTS TRAY
8812
SPECS SIZE
DIAMETER (IN.) 9.5 X 5.5
MIGHTY MAG RED RECTANGULAR

MAGNETIC PARTS TRAY
8813
SPECS SIZE
DIAMETER (IN.) 9.5 x 5.5
MIGHTY MAG TRIPLE RECTANGULAR

MAGNETIC PARTS TRAY
8814
SPECS SIZE
DIAMETER (IN.) 14.25 x 6.5
MIGHTY MAG QUAD

MAGNETIC PARTS TRAY
8817
SPECS SIZE
DIAMETER (IN.) 11 x 11.5
SUNEX TOOLS
Presses..................................... Pg 238
Press Accessories ..................... Pg 241
2 YEAR
WA R R A N T Y
Sunex HD Shop Presses are made

in the USA and carry a Two-Year
Warranty. During this warranty
period, we’ll repair or replace at
our option any part or unit which
proves to be defective in material
or workmanship.
SHOP PRESSES
For over four decades, Sunex Tools has been designing
and manufacturing shop presses and accessories for the
automotive, heavy-duty truck, and industrial shops. Built in
the USA since 1977, professionals nationwide look to Sunex
for top performing heavy-duty shop presses. Our presses are
available in all capacities ranging from 12 ton to 150 ton, and
we offer manual, air/hydraulic, and electro-hydraulic power
options. With all-welded steel construction and heavy-duty
ram, Sunex shop presses are ready to meet your toughest
workplace demands.
238 HD SHOP PRESS LINE - U.S. MADE PRESSES
12 TON SHOP PRESS
Used for various shop applications including straightening, bending,
and removing/installing gears, bearings, and bushings.
• Proudly made in the USA

• Fully welded design for superior durability and strength
• Includes 3 piece punch kit, bed plates, and bearing shield
• Ideal for straightening, bending, and removing/installing gears,
bearings, and bushings
5712BT - BENCHTOP
5712 - MANUAL
5712 5712BT
20 TON SHOP PRESS

Air/hydraulic option for effortless usage

5720 - MANUAL
5720AH - AIR/HYDRAULIC
5720 5720AH
30 TON SHOP PRESS


• Includes shock-absorbent glycerin gauge
• Includes bed plates and bearing shield
5730 - MANUAL
VERTICAL
CAPACITY OVERALL BASE WIDTH THROAT THROAT RAM STROKE CYLINDER WEIGHT
MODEL # (TONS) HEIGHT (IN.) (IN.) OPENING (IN.) WIDTH (IN.) (IN.) RAM DIA. (IN.) BORE (IN.) (LBS.)
5712BT 12 38.1 26 10 to 27.5 6.1 16 1.7 2.0 121
5712 12 61.5 26 3.75 to 36 6.1 20 1.7 2.0 190
5720 20 64.5 26 1.5 to 34 6 6 2 3.0 265
5720AH 20 @ 100 PSI 64.5 26 1.5 to 34 6 6 2 3.0 290
5730 30 70.5 29.88 3.5 to 44 6.38 6.38 2.25 3.15 225
SUNEX TOOLS
U.S. MADE PRESSES - HD SHOP PRESS LINE 239
40 TON SHOP PRESS

Air/hydraulic operation ideal for effortless usage.
Electric operation ideal for production level usage.
5740 • Proudly made in the USA

5740 - MANUAL
5740AH 5740AH - AIR/HYDRAULIC
5740EP - ELECTRIC
5740EP
VERTICAL
5740 40 74 35 1.5 to 34 6.75 6.75 2 3.5 513
5740AH 40 @ 100 PSI 74 35 1.5 to 34 6.75 6.75 2 3.5 522
5740EP 40 76.25 32 1 to 40 8.25 8.25 2 6 480
50 TON SHOP PRESS

Air/hydraulic operation ideal for effortless usage.
Electric operation ideal for production level usage.
5750EP • Proudly made in the USA

5750 - MANUAL
5750AH
5750EP - ELECTRIC
5750
VERTICAL
5740 50 74 35 1.5 to 34 6.75 35 2 3.5 515
5740AH 50 @ 100 PSI 74 35 1.5 to 34 6.75 35 2 3.5 525
5740EP 50 74 35 1.5 to 34 6.75 35 2 6 560
SUNEXTOOLS.COM
240 HD SHOP PRESS LINE - U.S. MADE PRESSES
100 TON SHOP PRESS
Air/hydraulic operation ideal for effortless useage.
Electric operation ideal for production level useage.

57100EP - ELECTRIC
57100EP 57100AH
VERTICAL
57100AH 100 @ 100 PSI 78 36 1 to 32 7 34 2.5 5.5 1250
57100EP 100 78 36 1 to 32 7 34 3 6 1250
SUNEX TOOLS
PRESS ACCESSORIES - HD SHOP PRESS LINE 241
BEARING SPLITTERS
• Splitter halves made of forged steel with sharp angled edges to get
in-between tightly assembled parts
• Splitter halves include threaded holes for the acceptance of pushing/
pulling attachments
• Zinc plating and black oxide coating inhibit rust
*Bearing Splitters made in Taiwan

185050
185050
185002
185005
185007
185025
185026
185002 185005 185007 185025 185026
MODEL # SPREAD (IN.) TAPPED HOLE SIZE IN SPLITTER DISTANCE BETWEEN SHIPPING
HALVES (IN.) ADJUSTMENT SCREWS (IN.) WEIGHT
FROM TO
185002 1/4 15/16 5/16"-18 1-11/16 12 oz.
185005 1/8 2 3/8"-16 2-7/16 1 Lb., 4 oz.
185007 1-3/4 5-7/8 5/8"-18 6 4 Lbs., 4 oz.
185025 1/2 4-5/8 5/8"-18 4-3/8 5 Lbs.
185026 1/2 9 5/8"-18 6 12 Lbs., 9 oz.
185050 5/8 8 1"-14 7-1/8 19 Lbs., 12 oz.
BEARING SPLITTER SET

• Rotomolded plastic carrying case with individual recesses for organized
bearing splitter storage. Case provides easy access to splitters.
• Set includes four of the most commonly used bearing splitters and
pulley pulling tool. See chart above for specifications on models
185002, 185005, 185025, 185026 bearing splitters and model
185007 pulley pulling tool
*Bearing Splitters made in Taiwan
185055
SUNEXTOOLS.COM
IMPACT SOCKET
SPECIFICATIONS
244 IMPACT SOCKETS - SPECIFICATIONS
IMPACT ADAPTERS
U
ITEM SIZE (F) SIZE (M) D T1 T2 L1 L
1805 3/8"(F) 1/4"(M) 22 7.5 12 15 32
1801 1/4"(F) 3/8"(M) 13 10.8 10 15 26
%
2301 1/2"(F) 3/8"(M) 25 10.8 18 22 38
3300 3/8"(F) 1/2"(M) 22 15.5 12 14 32 U -
4301 3/4"(F) 1/2"(M) 44 15.5 25 33 36 -
2302 1/2"(F) 3/4"(M) 30 22 18 22 48
5303 1"(F) 3/4"(M) 54 22 33 42 75
4300 3/4"(F) 1"(M) 44 27 26 30 63
6332 1-1/2"(F) 1"(M) 86 27 43 56 100
5306 1"(F) 1-1/2"(M) 54 40.5 33 40 90
IMPACT EXTENSIONS
ITEM SIZE d D L1 L2 L
E
1802 1/4" DR. 2" 8 13 12 7 50.8
1804 1/4" DR. 4" 8 13 12 7 101.6
%
1806 1/4" DR. 6" 8 13 12 7 152
3503 3/8" DR. 3" 12 19 18 10 76.2
3505 3/8" DR. 5" 12 19 18 10 127 -
-
3510 3/8" DR. 10" 12 19 18 10 254 -
3515 3/8" DR. 15" 12 19 18 10 381

2503 1/2" DR. 3" 16.5 25 24 15.4 76.2
2505 1/2" DR. 5" 16.5 25 24 15.4 127
2510 1/2" DR. 10" 16.5 25 24 15.4 254
2515 1/2" DR. 15" 16.5 25 24 15.4 381
2524 1/2" DR. 24" 16.5 25 24 15.4 610
2536 1/2" DR. 36" 16.5 25 24 15.4 915
4302 3/4" DR. 6" 25 44 42 22 152
4310 3/4" DR. 10" 25 44 42 22 254
4313 3/4" DR. 13" 25 44 42 22 330.2
5300 1" DR. 6" 33 54 45 27 152
5310 1" DR. 10" 33 54 45 27 254
5313 1" DR. 13" 33 54 45 27 330.2
UNIVERSAL JOINTS
ITEM SIZE X d D L
D
X
1800 1/4" DR. 8.3 13 20 45

3301 3/8" DR. 12.6 22 27 51
2300 1/2" DR. 16.7 30 34 62
L
4304 3/4" DR. 25 44 50 90
5304 1" DR. 33 54 60 114
SAE METRIC
SUNEX TOOLS
SPECIFICATIONS - IMPACT SOCKETS 245
1/4" DR. STANDARD 6 POINT SAE

L1
ITEM SIZE SHAPE d D T1 T2 L1 L
%
E
806 3/16" A 8.4 13 6 9.5 7 23
D
d
807 7/32" A 9.4 13 6 9.5 7 23
5 5
808 1/4" A 10.3 13 8 9.5 7 23
- T1 T2
809 9/32" A 11.3 13 8 9.5 7 23
- L 810 5/16" A 12.3 13 8 9.5 7 23
811 11/32" B 13.4 13 13 9.5 8.5 23
A B
812 3/8" B 14.5 13 13 9.5 8.5 23
814 7/16" B 16.3 13 13 9.5 9.5 23
816 1/2" B 18.3 13 13 9.5 10.5 23
818 9/16" B 19.6 13 13 9.5 10.5 23
1/4" DR. MAGNETIC 6 POINT SAE

%
E
%
E
5 5
806MG 3/16" A 8.4 13 6 9.5 7 23
-
807MG 7/32" A 9.4 13 6 9.5 7 23
- 5 5
808MG 1/4" A 10.3 13 8 9.5 7 23
- -
809MG 9/32" A 11.3 13 8 9.5 7 23
A B 810MG 5/16" A 12.3 13 8 9.5 7 23
811MG 11/32" B 13.4 13 13 9.5 8.5 23
812MG 3/8" B 14.5 13 13 9.5 8.5 23
814MG 7/16" B 16.3 13 13 9.5 9.5 23
816MG 1/2" B 18.3 13 13 9.5 10.5 23
818MG 9/16" C 19.6 13 / / / 23
1/4" DR. STANDARD 6 POINT METRIC

%

E
%
E
804M 4mm A 7.5 13 5 9.5 7 23

5 5 - 8045M 4.5mm A 8.1 13 5 9.5 7 23
- 5 5 805M 5mm A 8.7 13 6 9.5 7 23
8055M 5.5mm A 9.3 13 6 9.5 7 23
- -
806M 6mm A 9.9 13 8 9.5 7 23
A B
807M 7mm A 11.1 13 8 9.5 7 23
808M 8mm A 12.3 13 8 9.5 7 23
809M 9mm B 13.8 13 8 9.5 8.5 23
810M 10mm B 15 13 9 9.5 8.5 23
811M 11mm B 16.3 13 9 9.5 9.5 23
812M 12mm B 17 13 9 9.5 10.5 23
813M 13mm B 18.8 13 9 9.5 10.5 23
814M 14mm B 20 13 9 9.5 10.5 23
815M 15mm B 21 13 9 9.5 10.5 23
SUNEXTOOLS.COM
1/4" DR. DEEP 6 POINT METRIC
%
E
%
E
5 5 -
804MD 4mm A 7.5 13 9 13 25 50
- 5 5
8045MD 4.5mm A 8.1 13 9 13 25 50
- -
805MD 5mm A 8.7 13 9 13 25 50
8055MD 5.5mm A 9.3 13 9 13 23 50 A B
806MD 6mm A 9.9 13 11 13 23 50
807MD 7mm A 11.1 13 11 13 23 50
808MD 8mm A 12.3 13 13 13 23 50
809MD 9mm A 13.8 13 13 13 8.5 50
810MD 10mm A 15 13 13 13 8.5 50
811MD 11mm B 16.3 13 13 13 9.5 50
812MD 12mm B 17 13 13 13 10.5 50
813MD 13mm B 18.8 13 13 13 10.5 50
814MD 14mm B 20 13 13 13 10.5 50
815MD 15mm B 21 13 13 13 10.5 50
1/4" DR. MAGNETIC DEEP 6 POINT METRIC %

E
%
E
804MDMG 4mm A 7.5 13 9 13 25 50 5 5 -
- 5 5
8045MDMG 4.5mm A 8.1 13 9 13 25 50
- -
805MDMG 5mm A 8.7 13 9 13 25 50
8055MDMG 5.5mm A 9.3 13 9 13 23 50
A B
806MDMG 6mm A 9.9 13 11 13 23 50
807MDMG 7mm A 11.1 13 11 13 23 50
808MDMG 8mm A 12.3 13 13 13 23 50
809MDMG 9mm A 13.8 13 13 13 8.5 50
810MDMG 10mm A 15 13 13 13 8.5 50
811MDMG 11mm B 16.3 13 13 13 9.5 50
812MDMG 12mm B 17 13 13 13 10.5 50
813MDMG 13mm B 18.8 13 13 13 10.5 50
814MDMG 14mm B 20 13 13 13 10.5 50
815MDMG 15mm B 21 13 13 13 10.5 50
SAE METRIC
SUNEX TOOLS
1/4" DR. MAGNETIC 6 POINT METRIC
%
E
%
E
804MMG 4mm A 7.5 13 / / / 23
5 5 -
8045MMG 4.5mm A 7.5 13 / / / 23
- 5 5 805MMG 5mm A 8.7 13 6 9.5 7 23
- - 8055MMG 5.5mm A 9.3 13 6 9.5 7 23

806MMG 6mm A 9.9 13 8 9.5 7 23
A B 807MMG 7mm A 11.1 13 8 9.5 7 23

808MMG 8mm A 12.3 13 8 9.5 7 23
809MMG 9mm B 13.8 13 8 9.5 8.5 23
810MMG 10mm B 15 13 9 9.5 8.5 23
811MMG 11mm B 16.3 13 9 9.5 9.5 23
812MMG 12mm B 17 13 9 9.5 10.5 23
813MMG 13mm B 18.8 13 9 9.5 10.5 23
814MMG 14mm B 20 13 9 9.5 10.5 23
815MMG 15mm B 21 13 10 9.5 10.5 23
1/4" DR. DEEP 6 POINT SAE

%
E
%
E

5 5 -
806D 3/16" A 8.4 13 9 13 23 50
- 5 5
- -
807D 7/32" A 9.4 13 9 13 23 50
808D 1/4" A 10.3 13 11 13 23 50
A B 809D 9/32" A 11.3 13 11 13 23 50

810D 5/16" A 12.3 13 13 13 23 50
811D 11/32" B 13.4 13 13 13 8.5 50
812D 3/8" B 14.5 13 13 13 8.5 50
814D 7/16" B 16.3 13 13 13 9.5 50
816D 1/2" B 18.3 13 13 13 10.5 50
818D 9/16" B 19.6 13 13 13 10.5 50
1/4" DR. MAGNETIC DEEP 6 POINT SAE

%
E
%
E
5 5
806DMG 3/16" A 8.4 13 9 13 23 50
-
- 5 5 807DMG 7/32" A 9.4 13 9 13 23 50

- - 808DMG 1/4" A 10.3 13 11 13 23 50
809DMG 9/32" A 11.3 13 11 13 23 50
A B 810DMG 5/16" A 12.3 13 13 13 23 50
811DMG 11/32" B 13.4 13 13 13 8.5 50
812DMG 3/8" B 14.5 13 13 13 8.5 50
814DMG 7/16" B 16.3 13 13 13 9.5 50
816DMG 1/2" B 18.3 13 13 13 10.5 50
818DMG 9/16" B 19.6 13 13 13 10.5 50
SUNEXTOOLS.COM
1/4" DR. UNIVERSAL MAGNETIC
12 POINT METRIC
ITEM SIZE D T D1 D2 L
E
E
%
806ZUMMG 6mm 10.0 8 13 18.0 10.0
807ZUMMG 7mm 11.5 8 13 18.0 11.5
5
808ZUMMG 8mm 12.5 8 13 18.0 12.5 -
809ZUMMG 9mm 14.0 8 13 18.0 14.0
810ZUMMG 10mm 15.0 8 13 18.0 15.0
811ZUMMG 11mm 16.5 8 13 18.0 16.5
812ZUMMG 12mm 16.8 8 13 20.0 16.8
813ZUMMG 13mm 18.8 8 13 20.0 18.8
814ZUMMG 14mm 19.8 8 13 20.0 19.8
815ZUMMG 15mm 20.8 8 13 20.8 20.8
1/4" DR. UNIVERSAL 6 POINT SAE

E
E
%
806U 3/16" 18 8 8.4 20 43
807U 7/32" 18 8 9.4 20 43
5
808U 1/4" 10.3 8 13 20 45 -
809U 9/32" 18 8 11.3 20 43
810U 5/16" 12.5 10 13 20 45
811U 11/32" 18 10 13.8 20 43
812U 3/8" 15 10 13 20 45
814U 7/16" 16.5 10 13 20 45
816U 1/2" 18.8 10 13 20 49
818U 9/16" 19.8 10 13 20 49
1/4" DR. UNIVERSAL 6 POINT METRIC

804UM 4mm 18.0 6 7.5 20 43
E
E
%
8045UM 4.5mm 18 8 8.1 20 43

805UM 5mm 8.8 8 13 20 45 5
8055UM 5.5mm 9.5 8 13 20 45 -
806UM 6mm 10 8 13 20 45
807UM 7mm 11.5 10 13 20 45
808UM 8mm 12.5 10 13 20 45
809UM 9mm 14 10 13 20 45
810UM 10mm 15 10 13 20 45
811UM 11mm 16.5 10 13 20 45
812UM 12mm 16.8 10 13 20 49
813UM 13mm 18.8 10 13 20 49
814UM 14mm 19.8 10 13 20 49
815UM 15mm 20.8 10 13 20 49 SAE METRIC
SUNEX TOOLS
t 1/4" DR. INTERNAL STAR

ITEM SIZE D d A T I L
d
1820S1 T10 13 2.80 2.4 10 12 25
L
1820S2 T15 13 3.30 2.5 10 12 25
1820S3 T20 13 3.95 2.6 10 12 25
L1 T 1820S4 T25 13 4.45 2.8 10 12 25
1820S5 T27 13 5 3.1 10 12 25
D 1820S6 T30 13 5.60 3.4 10 12 25

%
310 5/16" A 12.6 19 7 12 13 29.5

%
E
312 3/8" A 14.6 19 8 12 13 29.5

5 5 314 7/16" A 17.1 19 9 12 13 29.5
5 5
-
316 1/2" B / 19.7 9 12 / 29.5
-
318 9/16" B / 20.7 9 12 / 29.5
-
320 5/8" B / 23.5 11 12 / 29.5
A B 322 11/16" B / 24 11 12 / 30
324 3/4" B / 26 13 15 / 30
326 13/16" B / 28 13 15 / 30
328 7/8" B / 30 13 15 / 30
330 15/16" B / 32 13 15 / 30
332 1" B / 34 13 15 / 30

%
307M 7mm A 11.4 19 7 12 13 29.5

%
E
308M 8mm A 12.7 19 7 12 13 29.5

5 5 5 309M 9mm A 14 19 8 12 13 29.5
5
- 310M 10mm A 15.2 19 8 12 13 29.5
-
311M 11mm A 17 19 9 12 13 29.5
-
312M 12mm B / 19 9 12 / 29.5
A B 313M 13mm B / 19.7 9 12 / 29.5
314M 14mm B / 20.7 9 12 / 29.5
315M 15mm B / 22.2 11 12 / 29.5
316M 16mm B / 23.5 11 12 / 30
317M 17mm B / 24 11 12 / 30
318M 18mm B / 25 11 12 / 30
319M 19mm B / 26 13 15 / 30
320M 20mm B / 28 13 15 / 30
321M 21mm B / 28 13 15 / 30
322M 22mm B / 32 13 15 / 30
SUNEXTOOLS.COM
%
E
%
310D 5/16" A 12.6 19 12 14 13 64
312D 3/8" A 14.6 19 18 14 13 65 5 5
5 5
-
-
314D 7/16" A 17.1 19 18 14 13 65 -
316D 1/2" B / 19.7 22 14 / 65

318D 9/16" B / 20.7 24 14 / 65 A B
320D 5/8" B / 23.5 25 14 / 65
322D 11/16" B / 24 25 14 / 65
324D 3/4" B / 26 25 14 / 65
326D 13/16" B / 28 25 14 / 65
328D 7/8" B / 30 25 14 / 65
330D 15/16" B / 32 25 14 / 65
332D 1" B / 34 25 14 / 65

%
E
%
307MD 7mm A 11.4 19 12 14 13 63
5
308MD 8mm A 12.7 19 12 14 13 64 5
5 5
-
-
309MD 9mm A 14 19 12 14 13 65 -
310MD 10mm A 15.2 19 18 14 13 65

311MD 11mm A 17 19 18 14 13 65 A B
312MD 12mm B / 19 20 14 / 65
313MD 13mm B / 19.7 22 14 / 65
314MD 14mm B / 20.7 24 14 / 65
315MD 15mm B / 22.2 25 14 / 65
316MD 16mm B / 24 25 14 / 65
317MD 17mm B / 24 25 14 / 65
318MD 18mm B / 25 25 14 / 65
319MD 19mm B / 26 25 14 / 65
320MD 20mm B 28 28 25 14 / 63
321MD 21mm B / 28 25 14 / 65
322MD 22mm B / 30 25 14 / 65

310Z 5/16" A 12.6 19 7 12 13 29.5
%
%
E
312Z 3/8" A 14.6 19 8 12 13 29.5

314Z 7/16" A 17.1 19 9 12 13 29.5
5 5
316Z 1/2" B / 19.7 9 12 / 29.5 5 5
-
318Z 9/16" B / 20.7 9 12 / 29.5 -
320Z 5/8" B / 23.5 11 12 / 29.5 -
322Z 11/16" B / 24 11 12 / 30
324Z 3/4" B / 26 13 15 / 30 A B
326Z 13/16" B / 28 13 15 / 30
328Z 7/8" B / 30 13 15 / 30
330Z 15/16" B / 32 13 15 / 30
332Z 1" B / 34 13 15 / 30
SAE METRIC
SUNEX TOOLS

307MZ 7mm A 11.4 19 7 12 13 29.5
%
%
E
308MZ 8mm A 12.7 19 7 12 13 29.5
5 5 5 309MZ 9mm A 14 19 8 12 13 29.5

5
- 310MZ 10mm A 15.2 19 8 12 13 29.5
-
311MZ 11mm A 17 19 9 12 13 29.5
-
312MZ 12mm B / 19 9 12 / 29.5
A B 313MZ 13mm B / 19.7 9 12 / 29.5

314MZ 14mm B / 20.7 9 12 / 29.5
315MZ 15mm B / 22.2 11 12 / 29.5
316MZ 16mm B / 23.5 11 12 / 30
317MZ 17mm B / 24 11 12 / 30
318MZ 18mm B / 25 11 12 / 30
319MZ 19mm B / 26 13 15 / 30
320ZM 20mm B / 28 13 15 / 30
321ZM 21mm B / 28 13 15 / 30
322ZM 22mm B / 32 13 15 / 30

%
E
36801 5/16" A 12.6 19 12 14 13 63

5 5
5 5
- 36802 3/8" A 14.6 19 18 14 13 63
- -
36803 7/16" A 17.1 19 18 14 13 63
36804 1/2" B / 20 22 14 / 63
A B
36805 9/16" B / 21 24 14 / 63
36806 5/8" B / 23.5 25 14 / 63
36807 11/16" B / 25 25 14 / 63
36808 3/4" B / 27 25 14 / 63
36809 13/16" B / 30 25 14 / 63
368010 7/8" B / 32 25 14 / 63
368011 15/16" B / 34 25 14 / 63
368012 1" B / 36 25 14 / 63
SUNEXTOOLS.COM
%
E
%
368207 7mm A 11.6 19 12 14 13 63
5 5
368208 8mm A 12.7 19 12 14 13 63 5 5
-
-
-
368209 9mm A 14 19 12 14 13 63
368210 10mm A 15.2 19 18 14 13 63
A B
368211 11mm A 17 19 18 14 13 63
368212 12mm A 18 19 20 14 13 63
368213 13mm B / 20 22 14 / 63
368214 14mm B / 21 24 14 / 63
368215 15mm B / 22.2 25 14 / 63
368216 16mm B / 23.5 25 14 / 63
368217 17mm B / 25 25 14 / 63
368218 18mm B / 26 25 14 / 63
368219 19mm B / 27 25 14 / 63

E
E
310U 5/16" 14 9 22 27 54.5
%
312U 3/8" 15 9 22 27 54.5
314U 7/16" 17 9 22 27 54.5 5
316U 1/2" 19 12 22 27 54.5 -
318U 9/16" 21 13 22 27 54.5
320U 5/8" 23 13 22 27 54.5
322U 11/16" 25 13 22 27 54.5
324U 3/4" 27 13 22 27 54.5
326U 13/16" 30 13 22 27 54.5
328U 7/8" 27 13 32 27 54.5

E
E
%
310UM 10mm 15 9 22 27 54.5

311UM 11mm 17 9 22 27 54.5
312UM 12mm 19 12 22 27 54.5 5
-
313UM 13mm 19 13 22 27 54.5
314UM 14mm 21 13 22 27 54.5
315UM 15mm 22 13 22 27 54.5
316UM 16mm 23 13 22 27 54.5
317UM 17mm 25 13 22 27 54.5
318UM 18mm 25 13 22 27 54.5
319UM 19mm 27 13 22 27 54.5
3206M 20mm 27 13 28 27 54.5
321UM 21mm 27 13 30 27 54.5
322UM 22mm 32 13 30 27 54.5 SAE METRIC
SUNEX TOOLS
3/8" DR. DEEP UNIVERSAL 6 POINT SAE

D
D
$
310UD 5/16" 14 12 22 27 80
312UD 3/8" 15 20 22 27 80
4
, 314UD 7/16" 17 20 22 27 80
316UD 1/2" 19 20 22 27 80
318UD 9/16" 21 20 22 27 80
320UD 5/8" 23 20 22 27 80
322UD 11/16" 25 20 22 27 80
324UD 3/4" 27 25 22 27 80
326UD 13/16" 30 25 22 27 80
328UD 7/8" 27 25 32 27 80
3/8" DR. DEEP UNIVERSAL 6 POINT METRIC

310UMD 10mm 15 20 22 27 80
D
D
$
311UMD 11mm 17 20 22 27 80
312UMD 12mm 19 20 22 27 80
4
, 313UMD 13mm 19 20 22 27 80
314UMD 14mm 21 20 22 27 80
315UMD 15mm 22 20 22 27 80
316UMD 16mm 23 20 22 27 80
317UMD 17mm 25 20 22 27 80
318UMD 18mm 25 20 22 27 80
319UMD 19mm 27 25 22 27 80
320UMD 20mm 27 25 28 27 80
321UMD 21mm 27 25 30 27 80
322UMD 22mm 27 25 32 27 80

E
E
%
310UZ 5/16" 14 12 22 27 80
312UZ 3/8" 15 20 22 27 80
5 314UZ 7/16" 17 20 22 27 80
-
316UZ 1/2" 19 20 22 27 80
318UZ 9/16" 21 20 22 27 80
320UZ 5/8" 23 20 22 27 80
322UZ 11/16" 25 20 22 27 80
324UZ 3/4" 27 25 22 27 80
326UZ 13/16" 30 25 22 27 80
328UZ 7/8" 27 25 32 27 80
330UZ 15/16" 27 25 34 27 80
332UZ 1" 27 25 36 27 80
SUNEXTOOLS.COM
E
E
%
307ZUM 7mm 12 9 22 27 55
308ZUM 8mm 13 9 22 27 55
309ZUM 9mm 14 12 22 27 55 5
-
310ZUM 10mm 15 13 22 27 55
311ZUM 11mm 17 13 22 27 55
312ZUM 12mm 19 13 22 27 55
313ZUM 13mm 19 13 22 27 55
314ZUM 14mm 21 13 22 27 55
315ZUM 15mm 22 13 22 27 55
316ZUM 16mm 23 13 22 27 55
317ZUM 17mm 25 13 28 27 55
318ZUM 18mm 25 13 30 27 55
319ZUM 19mm 27 13 30 27 55

D
D
$
310ZUD 5/16" 14 12 22 27 80
312ZUD 3/8" 15 20 22 27 80
4
314ZUD 7/16" 17 20 22 27 80 ,
316ZUD 1/2" 19 20 22 27 80
318ZUD 9/16" 21 20 22 27 80
320ZUD 5/8" 23 20 22 27 80
322ZUD 11/16" 25 20 22 27 80
324ZUD 3/4" 27 25 22 27 80
326ZUD 13/16" 30 25 22 27 80
328ZUD 7/8" 27 25 32 27 80
330ZUD 15/16" 27 25 34 27 80
332ZUD 1" 27 25 36 27 80

D
D
$
307MZUD 7mm 12 20 12 27 80
308MZUD 8mm 13 20 13 27 80
309MZUD 9mm 14 20 14 27 80
4
,
310MZUD 10mm 15 20 22 27 80
311MZUD 11mm 17 20 22 27 80
312MZUD 12mm 19 20 22 27 80
313MZUD 13mm 19 20 22 27 80
314MZUD 14mm 21 20 22 27 80
315MZUD 15mm 22 20 22 27 80
316MZUD 16mm 23 20 22 27 80
317MZUD 17mm 25 20 22 27 80
318MZUD 18mm 25 20 22 27 80
319MZUD 19mm 27 25 22 27 80
SAE METRIC
SUNEX TOOLS
3/8" DR. MAGNETIC 6 POINT SAE

ITEM SIZE SHAPE d D T1 T2 L2 L1
%
E
E
%
308MG 1/4" A 10.6 19 7 12 12 29.5
5 5 - 310MG 5/16" A 12.6 19 7 12 12 29.5
- 5 5 312MG 3/8" A 14.6 19 8 12 12 29.5
- - 314MG 7/16" A 17.1 19 9 12 12 29.5

316MG 1/2" B / 19.7 9 12 / 29.5
A B 318MG 9/16" B / 20.7 9 12 / 29.5
320MG 5/8" B / 23.5 11 12 / 29.5
322MG 11/16" B / 24 11 12 / 30
324MG 3/4" B / 26 13 15 / 30
3/8" DR. MAGNETIC 6 POINT METRIC

ITEM SIZE SHAPE d D T1 T2 L2 L1
%
%
307MMG 7mm A 11.4 19 7 12 12 29.5

5 5 5 5 308MMG 8mm A 12.7 19 7 12 12 29.5
- 309MMG 9mm A 14 19 8 12 12 29.5
- - 310MMG 10mm A 15.2 19 8 12 12 29.5
311MMG 11mm A 17 19 9 12 12 29.5
A B 312MMG 12mm A 18 19 9 12 12 29.5
313MMG 13mm A 19.3 22 9 12 12 29.5
%
314MMG 14mm A 20.3 22 9 12 12 29.5

315MMG 15mm B / 22.2 11 12 / 29.5
-
316MMG 16mm C / 23.5 11 12 / 30
5 5
317MMG 17mm C / 24 11 12 / 30
-
318MMG 18mm C / 25 11 12 / 30
C 319MMG 19mm C / 26 13 15 / 30
3/8" DR. INTERNAL STAR

ITEM SIZE D d t T L1 L
t
3670S1 T20 19 3.95 2.60 15 20 45
d 3670S2 T25 19 4.45 2.80 15 20 45

3670S3 T27 19 5 3.10 15 20 45
L
3670S4 T30 19 5.60 3.40 15 20 45
3670S5 T40 19 6.70 3.70 15 20 45
L1 T 3670S6 T45 19 7.90 4 15 20 45

3670S7 T47 19 8.30 4.50 15 20 45
3670S8 T50 19 8.90 4.80 15 20 45
D
3670S9 T55 19 11.20 5.40 15 20 45
SUNEXTOOLS.COM
3/8" DR. EXTERNAL STAR
ITEM SIZE D d T1 T L1 L2 L -
3045E E4 17 7.3 12 7.5 15 13 28
-
3670SE1 E5 17 8.3 12 7.5 15 13 28
3670SE2 E6 17 9.3 12 9.5 15 13 28
3670SE3 E7 17 9.8 12 9.5 15 13 28
%
E
3670SE4 E8 17 11.2 12 10.5 15 13 28
3670SE5 E10 17 13.2 12 10.5 15 13 28
3670SE6 E11 17 13.8 12 11.5 15 13 28 U 5
3670SE7 E12 17 14.8 12 11.5 15 13 28 -
3670SE8 E14 18 16.8 12 11.5 15 13 28

3670SE9 E16 20 18.8 12 11.5 15 13 28
3/8" DR. HEX SAE

ITEM SIZE d D T L1 L
E
36471 3/16" 6.7 19 13 18.5 60
%
36472 7/32" 7.6 19 13 18.5 60
36473 1/4" 8.5 19 13 18.5 60
36474 5/16" 10.5 19 13 18.5 60
36475 3/8" 12.2 19 13 18.5 60
5
36476 7/16" 13.9 19 13 18.5 60
36477 1/2" 15.8 19 13 18.5 60 -
36478 9/16" 17.6 19 13 18.5 60 -
36479 5/8" 18 19 13 18.5 60
3/8" DR. HEX METRIC

E
36481 4mm 6 19 13 18.5 60
%
36482 5mm 7 19 13 18.5 60

36483 6mm 8 19 13 18.5 60
36484 7mm 9 19 13 18.5 60
36485 8mm 10.5 19 13 18.5 60 5
36486 9mm 11.5 19 13 18.5 60
36487 10mm 12.5 19 13 18.5 60 -
36488 12mm 15 19 13 18.5 60 -
36489 14mm 17.5 19 13 18.5 60
364810 16mm 18.1 19 13 18.5 60
364811 17mm 19 19 13 18.5 60
SAE METRIC
SUNEX TOOLS
3/8" DR. UNIVERSAL HEX SAE

,
ITEM SIZE D T L1 L
365802 3/16" 27 11 30 61
$
365804 7/32" 27 11 30 61
4 365806 1/4" 27 11 30 61
,
365808 5/16" 27 15 30 61
365810 3/8" 27 15 30 61
365812 7/16" 27 15 30 61
365814 1/2" 27 15 30 61
3/8" DR. UNIVERSAL HEX METRIC

,
ITEM SIZE D T L1 L
365904 4mm 27 10 30 61
$
365905 5mm 27 11 30 61
4 365906 6mm 27 11 30 61
,
365907 7mm 27 15 30 61
365908 8mm 27 15 30 61
365910 10mm 27 15 30 61
365912 12mm 27 15 30 61
SUNEXTOOLS.COM
%
E
210 5/16" A 14.5 22 7 17 10 38
212 3/8" A 16 22 7 17 10 38
214 7/16" A 18 22 8 17 10 38 5 5
216 1/2" A 20 22 10 17 10 38 -
-
218 9/16" A 22 24 10 17 10 38
220 5/8" B / 25 11 17 / 38
222 11/16" B / 26 12 17 / 38
A
224 3/4" B / 28 12 17 / 38
226 13/16" B / 30 13 17 / 38
%
228 7/8" B / 32 13 17 / 38
230 15/16" B / 34 15 17 / 38
232 1" B / 36 15 17 / 38 5 5
234 1-1/16" B / 38 17 17 / 40 -
236 1-1/8" C 40 38 17 17 15 40
238 1-3/16" C 42 38 17 17 15 40 B
240 1-1/4" C 44 38 17 17 15 40
-
242 1-5/16" C 45 38 20 17 15 43
244 1-3/8" C 47 38 20 17 15 43
246 1-7/16" C 48.5 38 20 17 15 43
%
E
248 1-1/2" C 50.5 39 20 17 15 43
250 1-9/16" C 54 43 20 17 15 44
5 5
252 1-5/8" C 56 46 20 17 15 44
-
254 1-11/16" C 61 60 20 17 15 44
256 1-3/4" C 63 60 20 17 15 44 C
258 1-13/16" C 65 70 25 17 15 44
260 1-7/8" C 66 70 25 17 15 44
262 1-15/16" C 68 70 25 17 15 44
264 2" C 69 70 25 17 15 52
266 2-1/16" C 72 70 25 17 15 52
268 2-1/8" C 75 70 25 17 15 52
270 2-3/16" C 75 70 25 17 15 52
272 2-1/4" C 78 70 25 17 15 52
SAE METRIC
SUNEX TOOLS

%
208M 8mm A 14.1 22 7 17 10 38
E
209M 9mm A 15.6 22 7 17 10 38
5 5
210M 10mm A 16.7 22 7 17 10 38
211M 11mm A 18 22 8 17 10 38
-
212M 12mm A 19 22 9 17 10 38
-
213M 13mm A 20.2 24 10 17 10 38
A 214M 14mm A 21.5 24 10 17 10 38
215M 15mm A 23 25 11 17 10 38
216M 16mm B / 25 11 17 / 38
217M 17mm B / 26 12 17 / 38
%
218M 18mm B / 26.5 12 17 / 38

219M 19mm B / 28 12 17 / 38
5 5
220M 20mm B / 30 12 17 / 38
- 221M 21mm B / 30 13 17 / 38
222M 22mm B / 32 13 17 / 38
B 223M 23mm B / 32 13 17 / 38
224M 24mm B / 34 15 17 / 38
-
225M 25mm B / 36 15 17 / 36
226M 26mm B / 36 15 17 / 38
227M 27mm B / 38 17 17 / 40
%
E
228M 28mm B 40 38 17 17 15 40
230M 30mm C 42 38 17 17 15 40
5 5
231M 31mm C 44 38 19 17 15 40
-
232M 32mm C 44 38 24 17 15 40
C 233M 33mm C 44 38 24 17 15 50
234M 34mm C 46 38 31 17 15 50
236M 36mm C 48 38 31 17 15 50
SUNEXTOOLS.COM
%
E
210D 5/16" A 14.5 22 14 18 17 78 5
5
-
212D 3/8" A 16 22 14 18 17 78 -
214D 7/16" A 18 22 14 18 17 78
216D 1/2" A 20 22 14 18 17 78 A
218D 9/16" A 22 24 17 18 17 78
220D 5/8" B / 25 17 18 / 78
222D 11/16" B / 26 17 18 / 78
%
224D 3/4" B / 28 17 18 / 78
226D 13/16" B / 30 24 18 / 78 5 5
-
228D 7/8" B / 32 24 18 / 78
230D 15/16" B / 34 24 18 / 78
232D 1" B / 36 24 18 / 78
B
234D 1-1/16" B / 38 24 18 / 78
236D 1-1/8" C 40 38 24 18 15 78
-
238D 1-3/16" C 42 38 24 18 15 78
240D 1-1/4" C 44 38 24 18 15 78
%
E
242D 1-5/16" C 45 38 34 24 18 78
244D 1-3/8" C 47 38 34 24 18 78
5 5
246D 1-7/16" C 48.5 38 34 24 18 78
-
248D 1-1/2" C 50.5 39 34 24 18 78

250D 1-9/16" C 54 44 39 29 23 78 C
252D 1-5/8" C 56 44 39 29 23 78
254D 1-11/16" C 61 44 39 29 23 93
256D 1-3/4" C 63 44 39 29 23 93
258D 1-13/16" C 65 44 39 29 23 93
260D 1-7/8" C 66 44 39 29 23 93
262D 1-15/16" C 68 44 39 29 23 93
264D 2" C 69 52 48 38 32 93
266D 2-1/16" C 72 52 48 38 32 93
268D 2-1/8" C 75 52 48 38 32 93
270D 2-3/16" C 75 52 48 38 32 93
272D 2-1/4" C 78 52 48 38 32 93
SAE METRIC
SUNEX TOOLS
$
D

4
4
208MD 8mm A 14.5 22 14 18 17 78
,
,
209MD 9mm A 15.6 22 14 18 17 78
210MD 10mm A 16.7 22 14 18 17 78
A 211MD 11mm A 18 22 14 18 17 78
212MD 12mm A 19 22 14 18 17 78
213MD 13mm A 20.2 24 14 18 17 78
214MD 14mm A 21.5 24 17 18 17 78
%
215MD 15mm B / 24 17 18 / 78
5 5
216MD 16mm B / 25 17 18 / 78
-
217MD 17mm B / 26 17 18 / 78
218MD 18mm B / 26 17 18 / 78
B
219MD 19mm B / 28 17 18 / 78
220MD 20mm B / 30 19 18 / 78
- 221MD 21mm B / 30 24 18 / 78
222MD 22mm B / 32 24 18 / 78
223MD 23mm B / 32 24 18 / 78
%
E
224MD 24mm B / 34 24 18 / 78
5 5
225MD 25mm B / 36 36 18 / 78
-
226MD 26mm B / 36 24 18 / 78
227MD 27mm B / 38 24 18 / 78
C
228MD 28mm B / 38 24 18 / 78
230MD 30mm C 42 38 24 18 15 78
231MD 31mm C 44 38 24 18 15 78
232MD 32mm C 44 38 24 18 15 78
233MD 33mm C 44 38 24 18 15 78
234MD 34mm C 45 38 34 18 15 78
236MD 36mm C 50 38 34 18 15 78
SUNEXTOOLS.COM
1/2" DR. EXTRA DEEP 6 POINT SAE
$
D
210XD 5/16" A 15 24 25 22 70 127
4 4
212XD 3/8" A 16 24 25 22 70 127
,
214XD 7/16" A 18 24 25 22 70 127
,
216XD 1/2" A 20 24 25 22 70 127
218XD 9/16" A 22 24 25 22 70 127 A
220XD 5/8" B / 24 25 20 / 127
222XD 11/16" B / 26 25 20 / 127
224XD 3/4" B / 28 25 20 / 127
D
226XD 13/16" B / 29.5 25 20 / 127
228XD 7/8" B / 32 25 20 / 127 T1 T2
L
230XD 15/16" B / 33.7 25 20 / 127
232XD 1" B / 36 25 20 / 127 B
234XD 1-1/16" B / 38 25 20 / 127
236XD 1-1/8" C 40 38 25 20 / 127
238XD 1-3/16" C 42 38 25 20 / 127
%
E
240XD 1-1/4" C 44 38 25 20 / 127
242XD 1-5/16" C 46 38 25 20 / 127
244XD 1-3/8" C 48 38 25 20 / 127
5
246XD 1-7/16" C 51 38 25 20 / 127 5
248XD 1-1/2" C 53 38 25 20 / 127 -
SAE METRIC
SUNEX TOOLS
1/2" DR. EXTRA DEEP 6 POINT METRIC

$
D
208MXD 8mm A 14.5 24 25 22 70 127

4 4 209MXD 9mm A 15.6 24 25 22 70 127
,
210MXD 10mm A 16.7 24 25 22 70 127
,
211MXD 11mm A 18.0 24 25 22 70 127
A 212MXD 12mm A 19.0 24 25 22 70 127
213MXD 13mm A 20.2 24 25 22 70 127
214MXD 14mm A 21.5 24 25 22 70 127
215MXD 15mm B / 24.0 25 20 / 127
D
216MXD 16mm B / 25.0 25 20 / 127
T1 T2 217MXD 17mm B / 26.0 25 20 / 127
L
218MXD 18mm B / 26.0 25 20 / 127
219MXD 19mm B / 28.0 25 20 / 127
B
220MXD 20mm B / 30.0 25 20 / 127
221MXD 21mm B / 30.0 25 20 / 127
222MXD 22mm B / 32.0 25 20 / 127
223MXD 23mm B / 32.0 25 20 / 127
%
E
224MXD 24mm B / 34.0 25 20 / 127

225MXD 25mm B / 36.0 25 20 / 127
5 226MXD 26mm B / 36.0 25 20 / 127
5
- 227MXD 27mm B / 38.0 25 20 / 127
228MXD 28mm C 40.0 38.0 25 20 / 127
C 229MXD 29mm C 40.0 38.0 25 20 / 127
230MXD 30mm C 42.0 38.0 25 20 / 127
231MXD 31mm C 44.0 38.0 25 20 / 127
232MXD 32mm C 44.0 38.0 25 20 / 127
233MXD 33mm C 47.0 38.0 25 20 / 127
234MXD 34mm C 49.0 38.0 25 20 / 127
235MXD 35mm C 50.0 38.0 25 20 / 127
236MXD 36mm C 51.0 38.0 25 20 / 127
237MXD 37mm C 52.0 38.0 25 20 / 127
238MXD 38mm C 53.0 38 25 20 / 127
1/2" DR. EXTRA THIN-WALL DEEP 6 POINT SAE

ITEM SIZE D T1 T2 L
%
2624 3/4" 26 19 18 78
2626 13/16" 28 24 18 78
2628 7/8" 30 24 18 78
5 5
2632 1" 34 24 18 78
-
2634 1-1/16" 36 24 18 78
SUNEXTOOLS.COM
1/2" DR. EXTRA THIN-WALL DEEP
6 POINT METRIC
ITEM SIZE D T1 T2 L
%
2617 17mm 24 17 18 78
2619 19mm 26 19 18 78
2621 21mm 28 24 18 78 5 5
2622 22mm 29.5 24 18 78 -
2623 23mm 30.5 24 18 78

$
D
212Z 3/8" A 14.5 20 8 17 16 38
214Z 7/16" A 18 24 8 17 16 38
216Z 1/2" A 20 24 10 17 16 38 4 4
218Z 9/16" A 22 24 10 17 16 38 ,
220Z 5/8" B / 24 11 17 / 38 ,
222Z 11/16" B / 26 12 17 / 38
A
224Z 3/4" B / 28 12 17 / 38
226Z 13/16" B / 30 13 17 / 38
228Z 7/8" B / 32 13 17 / 38
%
230Z 15/16" B / 34 20 17 / 45
232Z 1" B / 36 20 17 / 45
234Z 1-1/16" B / 38 24 17 / 50 5 5
236Z 1-1/8" C 40 38 24 17 15 50 -
238Z 1-3/16" C 42 38 24 17 15 50
240Z 1-1/4" C 44 38 24 17 15 50 B
242Z 1-5/16" C 45 38 24 17 15 50 -
244Z 1-3/8" C 47 38 24 17 15 50
246Z 1-7/16" C 48.5 38 24 17 15 50
248Z 1-1/2" C 51 38 24 17 15 50
%
E
5 5
SAE METRIC
SUNEX TOOLS

%
E
209ZM 9mm A 14.5 24 7 17 16 38

210ZM 10mm A 16 24 7 17 16 38
5 5
211ZM 11mm A 17.5 24 8 17 16 38
-
212ZM 12mm A 19 24 9 17 16 38
-
213ZM 13mm A 20 24 10 17 16 38
A 214ZM 14mm A 22 24 10 17 16 38
215ZM 15mm B / 24 11 17 / 38
216ZM 16mm B / 24 11 17 / 38
217ZM 17mm B / 26 12 17 / 40
218ZM 18mm B / 27 12 17 / 40
%
219ZM 19mm B / 28 12 17 / 40
221ZM 21mm B / 30 13 17 / 40
5 5
- 222ZM 22mm B / 32 13 17 / 40
224ZM 24mm B / 34 15 17 / 42
225ZM 25mm B / 36 15 17 / 42
B 226ZM 26mm B / 36 15 17 / 50
227ZM 27mm B / 38 15 17 / 50
228ZM 28mm B / 40 15 17 / 50
230ZM 30mm C 42.0 38.0 24 17 15 50
231ZM 31mm C 44.0 38.0 24 17 15 50
232ZM 32mm C 44.0 38.0 24 17 15 50
233ZM 33mm C 46.0 38.0 24 17 15 50
234ZM 34mm C 46.0 38.0 24 17 15 50
235ZM 35mm C 46 38 24 17 15 50
236ZM 36mm C 46 38 24 17 15 50
SUNEXTOOLS.COM
%
E
26701 3/8" A 16 25 14 18 17 82 5
5
-
26702 7/16" A 18 25 14 18 17 82
-
26703 1/2" A 20 25 14 18 17 82
26704 9/16" A 22 25 17 18 17 82 A
26705 5/8" B / 25 17 18 / 82
26706 11/16" B / 26 17 18 / 82
%
26707 3/4" B / 28 17 18 / 82
5 5
26708 13/16" B / 30 24 18 / 82 -
26709 7/8" B / 32 24 18 / 82
267010 15/16" B / 34 24 18 / 82 B
267011 1" B / 36 24 18 / 82
267012 1-1/16" B / 38 24 18 / 82 -
267013 1-1/8" C 40 38 24 18 15 82
267014 1-3/16" C 42 38 24 18 15 82
%
E
267015 1-1/4" C 44 38 24 18 15 82
242ZD 1-5/16" C 45 38 24 18 15 90 5 5
-
244ZD 1-3/8" C 47 38 24 18 15 90
246ZD 1-7/16" C 48.5 38 24 18 15 90
248ZD 1-1/2" C 51 38 24 18 15 90
C
%
E

209ZMD 9mm A 14.5 25 14 18 17 82 5
5
-
267210 10mm A 16.7 25 14 18 17 82 -
267211 11mm A 18 25 14 18 17 82
267212 12mm A 19 25 14 18 17 82 A
267213 13mm A 20.2 25 14 18 17 82
267214 14mm A 21.5 25 17 18 17 82
%
267215 15mm A 23 25 17 18 17 82
267216 16mm B / 25 17 18 / 82 5 5
-
267217 17mm B / 26 17 18 / 82
267218 18mm B / 27 17 18 / 82
267219 19mm B / 28 17 18 / 82 B
267220 20mm B / 30 19 18 / 82
267221 21mm B / 30 24 18 / 82
267222 22mm B / 32 24 18 / 82
267223 23mm B / 34 24 18 / 82
267224 24mm B / 34 24 18 / 82
SAE METRIC
SUNEX TOOLS
E
E
%
212U 3/8" 15 14 30 30 66
5
- 214U 7/16" 17 14 30 34 68
216U 1/2" 19 14 30 34 68
218U 9/16" 22 14 30 34 68
220U 5/8" 23 14 30 34 68
222U 11/16" 26 14 30 34 68
224U 3/4" 28 14 30 34 68
226U 13/16" 30 14 30 34 68
228U 7/8" 32 14 30 34 68
230U 15/16" 34 14 30 34 68
236U 1-1/16" 34 14 30 44 68

E
E
210UM 10mm 15 14 26 30 68
%
211UM 11mm 17 14 26 30 68
5 212UM 12mm 19 14 26 30 68
- 213UM 13mm 20 14 30 34 68
214UM 14mm 22 14 30 34 68
215UM 15mm 23 14 30 34 68
216UM 16mm 23 14 30 34 68
217UM 17mm 26 14 30 34 68
218UM 18mm 26 14 30 34 68
219UM 19mm 28 14 30 34 68
220UM 20mm 30 14 30 34 68
221UM 21mm 30 14 30 34 68
222UM 22mm 32 14 30 34 68
223UM 23mm 32 14 30 34 68
224UM 24mm 34 14 30 34 68

D
D
$
212UD 3/8" 15 14 30 34 90
214UD 7/16" 17 14 30 34 90
4 216UD 1/2" 19 14 30 34 90
,
218UD 9/16" 22 14 30 34 90
220UD 5/8" 23 14 30 34 90
222UD 11/16" 26 14 30 34 90
224UD 3/4" 28 14 30 34 90
226UD 13/16" 30 14 30 34 90
228UD 7/8" 32 14 30 34 90
230UD 15/16" 34 14 30 34 90
SUNEXTOOLS.COM
D
D
$
210UMD 10mm 15 17 30 34 90
211UMD 11mm 17 20 30 34 90 4
212UMD 12mm 19 20 30 34 90
,
213UMD 13mm 20 20 30 34 90
214UMD 14mm 22 20 30 34 90
215UMD 15mm 23 20 30 34 90
216UMD 16mm 23 20 30 34 90
217UMD 17mm 26 20 30 34 90
218UMD 18mm 26 20 30 34 90
219UMD 19mm 28 25 30 34 90
220UMD 20mm 30 25 30 34 90
221UMD 21mm 30 25 30 34 90
222UMD 22mm 32 25 30 34 90
223UMD 23mm 32 25 30 34 90
224UMD 24mm 34 25 30 34 90
1/2" DR. STANDARD UNIVERSAL 6 POINT SAE

E
E
%
212UZ 3/8" 15 17 30 34 66
214UZ 7/16" 17 20 30 34 66
216UZ 1/2" 19 20 30 34 66 5
218UZ 9/16" 20 20 30 34 66 -
220UZ 5/8" 22 20 30 34 66
222UZ 11/16" 23 20 30 34 66
224UZ 3/4" 23 20 30 34 66
226UZ 13/16" 26 20 30 34 66
228UZ 7/8" 26 20 30 34 66
230UZ 15/16" 28 25 30 34 66
232UZ 1" 30 25 30 34 79
234UZ 1-1/16" 30 25 30 34 79
236UZ 1-1/8" 32 25 30 34 79
238UZ 1-3/16" 32 25 30 34 79
240UZ 1-1/4" 34 25 30 34 79
SAE METRIC
SUNEX TOOLS
1/2" DR. STANDARD UNIVERSAL

12 POINT METRIC
E
E
%
210ZUM 10mm 15 14 30 30 66
211ZUM 11mm 17 14 30 34 68
5 213ZUM 13mm 19 14 30 34 68
-
214ZUM 14mm 22 14 30 34 68
215ZUM 15mm 23 14 30 34 68
216ZUM 16mm 26 14 30 34 68
217ZUM 17mm 28 14 30 34 68
218ZUM 18mm 30 14 30 34 68
219ZUM 19mm 32 14 30 34 68
220ZUM 20mm 34 14 30 34 68
221ZUM 21mm 34 14 30 44 68
222ZUM 22mm 34 14 30 34 68
223ZUM 23mm 34 14 30 34 68
224ZUM 24mm 34 14 30 34 68

D
D
$
212ZUD 3/8" 15 14 30 34 90
4 214ZUD 7/16" 17 14 30 34 90
, 216ZUD 1/2" 19 14 30 34 90
218ZUD 9/16" 22 14 30 34 90
220ZUD 5/8" 23 14 30 34 90
222ZUD 11/16" 26 14 30 34 90
224ZUD 3/4" 28 14 30 34 90
226ZUD 13/16" 30 14 30 34 90
228ZUD 7/8" 32 14 30 34 90
230ZUD 15/16" 34 14 30 34 90
232ZUD 1" 34 14 30 34 92
234ZUD 1-1/16" 34 14 30 34 92
236ZUD 1-1/8" 34 14 30 34 92
238ZUD 1-3/16" 34 14 30 34 92
240ZUD 1-1/4" 34 14 30 34 92
SUNEXTOOLS.COM
D
D
$
210MZUD 10mm 30 14 30 15 92
211MZUD 11mm 30 14 30 17 92 4
,
212MZUD 12mm 15 14 30 34 90
213MZUD 13mm 17 14 30 34 90
214MZUD 14mm 19 14 30 34 90
215MZUD 15mm 22 14 30 34 90
216MZUD 16mm 23 14 30 34 90
217MZUD 17mm 26 14 30 34 90
218MZUD 18mm 28 14 30 34 90
219MZUD 19mm 30 14 30 34 90
220MZUD 20mm 32 14 30 34 90
221MZUD 21mm 34 14 30 34 90
222MZUD 22mm 34 14 30 34 92
223MZUD 23mm 34 14 30 34 92
224MZUD 24mm 34 14 30 34 92
1/2" DR. DEEP 8 POINT

ITEM SIZE SHAPE d D T1 T2 L
%
E
212QD 3/8" A 18 24 14 18 83 5
5
214QD 7/16" A 20.0 24.0 14 18 83 -
-
216QD 1/2" B / 24.0 14 18 83
218QD 9/16" B / 26.0 17 18 83 A
220QD 5/8" B / 28.0 17 18 83
222QD 11/16" B / 30.0 17 18 83
%
224QD 3/4" B / 34.0 17 18 83
226QD 13/16" B / 36.0 24 18 83 5 5
-
228QD 7/8" B / 38.0 24 18 90
230QD 15/16" C 38.0 42.0 24 18 90 B
232QD 1" C 38.0 44.0 24 18 90
-
234QD 1-1/16" C 38.0 46.0 24 18 90

236QD 1-1/8" C 39.0 49.0 24 18 90
%
E
5 5
-
SAE METRIC
SUNEX TOOLS
1/2" DR. WHEEL PROTECTOR EXTRA

THIN-WALL SAE & METRIC
%
E
5 5
- 28492 3/4" A 26 30 24 18 58 85
-
28494 13/16" A 28 30 24 18 58 85
A 28496 7/8" B 29.5 32 26 18 58 85
28498 15/16" B 31.5 34 28 18 58 85
284910 1" B 33.5 36 28 18 58 85
D
d
284912 1-1/16" B 35.5 38 30 18 58 85

T1 T2
284917 17mm A 23.8 30 24 18 58 85
L1
284919 19mm A 26 30 24 18 58 85
L
284921 21mm A 28 30 24 18 58 85
B
1/2" DR. INTERNAL STAR

E
2690S1 T30 6 25 8 22.5 78

%
2690S2 T40 7.5 25 8.5 22.5 78

2690S3 T45 7.9 25 9.5 22.5 78
5
2690S4 T47 8.3 25 10 22.5 78
-
2690S5 T50 8.9 25 10.5 22.5 78
-
2690S6 T55 11.5 25 11.5 22.5 78
2690S7 T60 14 25 13 22.5 78
2690S8 T70 16 25 14 22.5 78
1/2" DR. EXTERNAL STAR

-
ITEM SIZE d D T1 T2 L
2690SE1 E10 17 22 16.5 11 38
2690SE2 E11 17 22 16.5 11 38
2690SE3 E12 17 22 16.5 11 38
%
E
2690SE4 E14 17 22 16.5 13 38
U
2690SE5 E16 17 22 16.5 13 38
U
- 2690SE6 E18 17 22 16.5 13 38
2690SE7 E20 17 22 16.5 15 38
2690SE8 E22 17 22 16.5 15 38
2690SE9 E24 18 22 16.5 16.2 38
SUNEXTOOLS.COM
1/2" DR. HEX SAE
E
%
26481 1/4" 8.5 25 11.5 22.5 68
26482 5/16" 10.5 25 12 22.5 68
26483 3/8" 12.2 25 12.5 22.5 68 5
26484 7/16" 13.9 25 13 22.5 68 -

-
26485 1/2" 15.8 25 13 22.5 68
26486 9/16" 17.6 25 14 22.5 68
26487 5/8" 19.8 25 15 22.5 68
26488 11/16" 21.5 25 15.5 22.5 68
26489 3/4" 23 25 16 22.5 68
264810 13/16" 23.5 25 17 22.5 68
1/2" DR. HEX METRIC
E
%
26491 6mm 8 25 13 22.5 68
26492 7mm 9 25 13.5 22.5 68
26493 8mm 10.5 25 14 22.5 68 5
26494 9mm 11.5 25 14.5 22.5 68
-
26495 10mm 12.5 25 15 22.5 68 -
26496 12mm 15 25 15.5 22.5 68

26497 14mm 17.5 25 16 22.5 68
264912 15mm 19 25 16.5 22.5 68
26498 16mm 20 25 17 22.5 68
26499 17mm 21 25 17 22.5 68
264913 18mm 22 25 18 22.5 68
264910 19mm 23 25 18 22.5 68
264911 21mm 23.82 25 19 22.5 68
1/2" DR. UNIVERSAL HEX SAE

,
ITEM SIZE D T L1 L
274806 1/4" 30 13.5 36 76
$
274808 5/16" 30 20.5 36 76

274810 3/8" 30 20.5 36 76 4
,
274812 7/16" 30 20.5 36 76
274814 1/2" 30 20.5 36 76
274816 9/16" 30 20.5 36 76
274818 5/8" 30 20.5 36 76
274820 3/4" 30 20.5 36 76
SAE METRIC
SUNEX TOOLS
1/2" DR. UNIVERSAL HEX METRIC

,
ITEM SIZE D T L1 L
274906 6mm 30 13.5 36 76
274907 7mm 30 13.5 36 76
$
4 274908 8mm 30 20.5 36 76

,
274910 10mm 30 20.5 36 76
274912 12mm 30 20.5 36 76
274914 14mm 30 20.5 36 76
274915 15mm 30 20.5 36 76
274917 17mm 30 20.5 36 76
274918 18mm 30 20.5 36 76
274919 19mm 30 20.5 36 76
1/2" DR. SPINDLE NUT METRIC

ITEM SIZE d D T1 T2 L1 L
2830 29mm 42 42 38 20 / 89
%
E
2800 30mm 42 42 38 20 / 89
2832 32mm 44 43 38 20 17 89
5 - 2834 34mm 46 43 38 20 17 89
5
- 2806 35mm 50 43 38 20 17 89
2802 36mm 51 43 38 20 17 89
2803 38mm 54 43 38 20 17 89
1/2" DR. HEAVY DUTY DEEP SAE

ITEM SIZE d D T1 L1 L
D
d
240HDD 1-1/4" 47 38 65 18 85
T1 L1
SUNEXTOOLS.COM
-
1/2" DR. TIE ROD

ITEM SIZE D d r T1 L1 L
%
E
S
2801 1/2" 38 57 19 37 39 57
5
-
1/2" DR. 3/8" (M) 36" EXTENSION
d
FOR TRANSMISSIONS
D
ITEM SIZE d D L1 L
2536T 1/2"(F) x 3/8"(M) 16.5 25 24 915 19
L1
1/2" DR. FLIP SAE & METRIC

- -
ITEM SIZE SHAPE d D T1 T2 T3 T4 L1 L2 L
%
E
2700 3/4" x 13/16" A 28 30 17 20 13 20.5 34 22 58
U U
2701 3/4" x 13/16" A 28 30 27 29 23 29.5 31 44 76 U U
2702 19mm x 21mm A 28 30 17 20 13 20.5 38 19 58 -
2704 19mm x 21mm A 28 30 27 29.5 23 29.5 31 43 76 A

2705 17mm x 21mm A 26 30 27 29.5 23 29.5 31 43 76
- -
2707 17mm x 19mm A 26 28 17 20.5 13 20.5 22 34 58
2706 3/4" x 13/16" A 26 28 27 29.5 23 29.5 31 43 76
%
E
2708 19mm x 21mm B 26 28 27 29.5 23 29.5 48 26 76

U U
2710 7/8" x 15/16" A 32 34 30.5 33.5 23 33.5 35 46 83 U U
2712 1" x 1-1/16" A 36.6 38 30.5 33.5 23 33.5 35 46 83 -
1/2" DR. TORQUE LIMITING EXTENSION

ITEM d D TORQUE TORQUE COLOR
d
FT. /LBS. NM
D
2465 9 12.7 65 90 Yellow

2480 11 12.7 80 110 Blue
24100 12.2 12.7 100 135 Gray
24120 13.7 12.7 120 160 White
24140 15.1 12.7 140 190 Aqua
SAE METRIC
SUNEX TOOLS

%
E
416 1/2" A 22 38 16 25 28 50
5 5 418 9/16" A 26.5 38 16 25 28 50
- 420 5/8" A 27.5 38 16 25 28 50
- 422 11/16" A 29 38 16 25 28 50
424 3/4" A 30 38 16 25 28 50
A
426 13/16" A 32 38 18 25 28 52
428 7/8" A 34 38 18 25 28 52
430 15/16" A 36 38 18 25 28 52
432 1" B / 40 18 25 / 52
%
434 1-1/16" B / 40 18 25 / 52
5 5 436 1-1/8" B / 42 18 25 / 52
438 1-3/16" B / 44 18 25 / 52
-
440 1-1/4" B / 44 18 25 / 52
B 442 1-5/16" C 47 44 22 25 23 56
444 1-3/8" C 50 44 22 25 23 56
446 1-7/16" C 51 44 22 25 23 56
448 1-1/2" C 53 44 22 25 23 56
%
E
450 1-9/16" C 56 44 26 31 25 62
- 452 1-5/8" C 58 44 26 31 25 62
5 5 454 1-11/16" C 63.5 44 26 31 25 62
-
456 1-3/4" C 65 44 26 31 25 62
C 458 1-13/16" C 67 44 32 31 25 68
460 1-7/8" C 68 44 32 31 25 68
462 1-15/16" C 70 44 34 31 25 70
464 2" C 71 54 35 32 25 72
466 2-1/16" C 74 54 35 32 25 72
468 2-1/8" C 77 54 35 32 25 72
470 2-3/16" C 77 54 35 34 25 74
472 2-1/4" C 80 54 35 34 25 74
474 2-5/16" C 82 54 35 35 27 75
476 2-3/8" C 84 54 35 35 27 75
478 2-7/16" C 85 54 35 35 27 75
480 2-1/2" C 86 54 35 35 27 75
482 2-9/16" C 89 62 36 28 30 78
484 2-5/8" C 91 62 38 28 30 80
486 2-11/16" C 93 62 38 28 30 80
488 2-3/4" C 95 62 40 28 30 82
490 2-13/16" C 98 62 40 28 30 82
492 2-7/8" C 100 62 40 28 30 82
494 2-15/16" C 102 62 42 28 30 85
496 3" C 104 62 42 28 30 87
SUNEXTOOLS.COM
%
E
419M 19mm A 30 38 16 25 28 50
420M 20mm A 31 38 16 25 28 52 5 5
421M 21mm A 32 38 18 25 28 52 -
-
422M 22mm A 34 38 18 25 28 52
423M 23mm A 35 38 18 25 28 52
A
424M 24mm A 36 38 18 25 28 52
425M 25mm B / 38 18 25 / 52
426M 26mm B / 40 18 25 / 52
%
427M 27mm B / 40 18 25 / 52
428M 28mm B / 42 18 25 / 52 5 5
429M 29mm B / 42 18 25 / 52 -
430M 30mm B / 44 18 25 / 52
431M 31mm B / 44 18 25 / 52 B
432M 32mm B / 44 22 25 / 56
433M 33mm C 47 44 22 25 23 56
%
E
434M 34mm C 48 44 22 25 23 56
435M 35mm C 50 44 22 25 23 56 -
436M 36mm C 51 44 22 25 23 56 5 5
438M 38mm C 53 44 22 25 23 56 -
440M 40mm C 56 44 26 31 25 62
C
441M 41mm C 58 44 26 31 25 62
442M 42mm C 61 44 26 31 25 62
443M 43mm C 63 44 27 31 25 63
444M 44mm C 65 44 27 31 25 63
445M 45mm C 66 44 27 31 25 63
446M 46mm C 67 44 27 31 25 63
447M 47mm C 68 44 32 31 25 68
448M 48mm C 69 44 32 31 25 68
449M 49mm C 70 44 34 31 25 70
450M 50mm C 71 54 35 32 25 72
452M 52mm C 74 54 35 32 25 72
454M 54mm C 77 54 35 32 25 72
455M 55mm C 77 54 35 34 25 74
456M 56mm C 80 54 35 34 25 74
460M 60mm C 84 54 35 35 25 75
465M 65mm C 88 54 35 38 25 78
SAE METRIC
SUNEX TOOLS

%
E
416D 1/2" A 22 38 20 26 33 85
5 5 418D 9/16" A 26.5 38 20 26 33 85
- 420D 5/8" A 27.5 38 20 26 33 85
-
422D 11/16" A 29 38 20 26 33 85
424D 3/4" A 30 38 20 26 33 85
A
426D 13/16" A 32 38 25 26 33 85
428D 7/8" A 34 38 25 26 33 85
430D 15/16" A 36 38 25 26 33 85
% 432D 1" B / 40 35 26 / 85
434D 1-1/16" B / 40 35 26 / 85
5 5 436D 1-1/8" B / 42 35 26 / 85
- 438D 1-3/16" B / 44 35 26 / 85
440D 1-1/4" B / 44 35 26 / 85
B 442D 1-5/16" C 47 44 35 26 23 85
444D 1-3/8" C 50 44 40 26 23 85
446D 1-7/16" C 51 44 40 26 23 85
%
E
448D 1-1/2" C 53 44 40 26 23 85
450D 1-9/16" C 56 44 40 26 25 85
- 452D 1-5/8" C 58 44 45 26 25 85
5 5
454D 1-11/16" C 63.5 44 45 26 25 85
-
456D 1-3/4" C 65 44 45 26 25 85
458D 1-13/16" C 67 44 45 30 25 85
C 460D 1-7/8" C 68 44 45 30 25 85
462D 1-15/16" C 70 44 45 30 25 85
464D 2" C 71 54 45 30 25 85
466D 2-1/16" C 74 54 55 35 27 95
476D 2-3/8" C 84 54 55 35 27 95
480D 2-1/2" C 86 54 55 35 27 95
482D 2-9/16" C 89 62 46 35 30 100
484D 2-5/8" C 91 62 50 35 30 100
486D 2-11/16" C 93 62 56 35 30 105
488D 2-3/4" C 95 62 56 35 30 105
490D 2-13/16" C 98 62 67 35 30 110
492D 2-7/8" C 100 62 67 35 30 110
494D 2-15/16" C 102 62 80 35 30 120
496D 3" C 104 62 80 35 30 120
SUNEXTOOLS.COM
%
E
419MD 19mm A 30 38 20 26 33 85
420MD 20mm A 31 38 25 26 33 85 5 5
421MD 21mm A 32 38 25 26 33 85 -
-
422MD 22mm A 34 38 25 26 33 85
423MD 23mm A 35 38 25 26 33 85 A
424MD 24mm A 36 38 25 26 33 85
425MD 25mm B / 38 35 26 / 85
426MD 26mm B / 40 35 26 / 85
%
427MD 27mm B / 40 35 26 / 85
428MD 28mm B / 42 35 26 / 85 5 5
429MD 29mm B / 42 35 26 / 85 -
430MD 30mm B / 44 35 26 / 85
432MD 32mm B / 44 35 26 / 85 B
433MD 33mm C 47 44 35 26 23 85
434MD 34mm C 48 44 35 26 23 85
435MD 35mm C 50 44 40 26 23 85
%
E
436MD 36mm C 51 44 40 26 23 85
438MD 38mm C 53 44 40 26 23 85 -
440MD 40mm C 56 44 40 26 25 85 5 5
441MD 41mm C 58 44 45 26 25 85 -
442MD 42mm C 61 44 45 26 25 85
C
443MD 43mm C 63 44 55 35 27 95
444MD 44mm C 65 44 55 35 27 95
446MD 46mm C 67 44 55 35 27 95
447MD 47mm C 68 44 55 35 27 95
448MD 48mm C 69 44 55 35 27 95
449MD 49mm C 70 44 55 35 27 95
450MD 50mm C 71 54 55 35 27 95
452MD 52mm C 74 54 55 35 27 95
455MD 55mm C 77 54 55 35 27 95
460MD 60mm C 84 54 55 35 27 105
465MD 65mm C 88 54 55 35 27 105
3/4" DR. DEEP THIN-WALL 6 POINT SAE

%
E
434DT 1-1/16" A 40 43 43 26 50 108 5 5
-
436DT 1-1/8" A 42 43 43 26 50 108 - 5 5
-
440DT 1-1/4" B / 45 43 26 / 108
A B
SAE METRIC
SUNEX TOOLS
3/4" DR. THIN-WALL 12 POINT SAE

%
E
%
420ZT 5/8" A 26 38 16 25 28 52
422ZT 11/16" A 28 38 16 25 28 52
5 5
- 424ZT 3/4" A 30 38 16 25 28 52
- 5 5
426ZT 13/16" A 32 38 18 25 28 52
- -
428ZT 7/8" A 33.5 38 18 25 28 52
A B 430ZT 15/16" A 35.5 38 18 25 28 52
432ZT 1" A 37.2 38 18 25 28 52
434ZT 1-1/16" A 39.2 40 18 25 28 52
%
E
436ZT 1-1/8" A 41.2 42 18 25 28 52

438ZT 1-3/16" A 42 44 18 25 28 52
- 440ZT 1-1/4 B / 44 18 25 / 56
5 5
444ZT 1-3/8" C 48 44 22 25 23 56
- 448ZT 1-1/2" C 52 44 22 23 23 56
452ZT 1-5/8" C 57 44 26 31 25 62
C
456ZT 1-3/4" C 62 44 26 31 25 62
460ZT 1-7/8" C 65 44 32 31 25 68
3/4" DR. DEEP THIN-WALL 12 POINT METRIC

%
%
E
415MZT 15mm A 25 38 16 25 28 52
5 5 5 5 416MZT 16mm A 26 38 16 25 28 52
- -
417MZT 17mm A 27 38 16 25 28 52
- -
418MZT 18mm A 28 38 16 25 28 52
419MZT 19mm A 30 38 16 25 28 52
A B 420MZT 20mm A 31 38 16 25 28 52
421MZT 21mm A 32 38 18 25 28 52
422MZT 22mm A 33.5 38 18 25 28 52
423MZT 23mm A 34.5 38 18 25 28 52
D
424MZT 24mm A 35.5 38 18 25 28 52
8
425MZT 25mm B 38 36.8 18 25 28 52
T1 T2 426MZT 26mm B 40 37.8 18 25 28 52

L 427MZT 27mm B 40 39.2 18 25 28 52
428MZT 28mm B 42 40.5 18 25 28 52
C 429MZT 29mm B 43 41.6 18 25 28 52
430MZT 30mm B 44 42.7 18 25 28 52
432MZT 32mm C / 44 22 25 / 56
433MZT 33mm C 45 44 22 25 / 56
435MZT 35mm C 48 44 22 25 / 56
436MZT 36mm C 49 44 22 25 / 56
438MZT 38mm C 51 44 22 25 / 56
440MZT 40mm C 54 44 26 31 / 62
SUNEXTOOLS.COM
3/4" DR. EXTRA LONG 6 POINT SAE & METRIC
%
%
ITEM SIZE d D1 D2 T1 T2 L1 L2 L
426XL 13/16"sq. 25 44 43 40 74 39 74 230 5
5
434XL 1-1/16" 28 44 42 40 65 35 75 230 - -
-
436XL 1-1/8" 28 44 43 40 65 35 75 230
440XL 1-1/4" 28 44 47 40 65 35 75 230
448XL 1-1/2" 28 44 54 40 65 35 75 230
433MXL 33mm 28 44 48 40 65 35 75 230
3/4" DR. SQUARE SAE

ITEM SIZE D T L
%
426S 13/16" 42 26 52
430S 15/16" 44 26 52
3/4" DR. HEAVY DUTY SQUARE SAE 5

%
E
426HDS 13/16" 42 51 32 26 62
5
¡
-
3/4" DR. DOUBLE SQUARE METRIC

ITEM SIZE SHAPE D t T L
417MSS 17mm A 44 23 26 54
%
%
419MS 19mm B 40 26 26 52
420MS 20mm B 44 28 26 54
U 5 U 5
421MSS 21mm B 44 28 26 54
- -
A B
SAE METRIC
SUNEX TOOLS
3/4" DR. BUDD WHEEL LIMITED DEPTH

& DEEP HEX SAE
%
ITEM SIZE SHAPE D T1 T2 L
448LD 1-1/2" A 57 14 26 97
5 5 5 5
- - 448DH 1-1/2" B 60 66 30 102
A B
- 3/4" DR. COMBINATION BUDD WHEEL

6 POINT SAE & METRIC
%
%
E
5
U U U
5 ITEM SIZE SHAPE d D T T1 T2 T3 L1 L
- U U U
- 4826C 1-1/2" x 13/16" A / 57 14 38 20 26 / 95
43517B 35mm x 17mm B 54 52 13 34 20 26 30 90
A B
4121C 41mm x 21mm B 58 54 14 38 22 26 30 99
3/4" DR. HEX SAE

E
45061 3/4" 23 44 22 32 88
%
45062 7/8" 26.7 44 24 32 88

45063 1" 30.2 44 26 32 88
-
-
45064 1-1/8" 34.2 44 30 32 88
-
45065 1-1/4" 38.3 44 30 32 88
3/4" DR. HEX METRIC

E
412MH 12mm 15 44 24 32 88
%
450714 14mm 17.5 44 18 32 88

450717 17mm 21 44 20 32 88
-
-
450719 19mm 23 44 22 32 88
-
450722 22mm 26.5 44 24 32 88
450724 24mm 28.7 44 24 32 88
SUNEXTOOLS.COM
3/4" DR. DEEP TRUCK PINION
LOCKNUT 6 POINT
ITEM SIZE d D T T1 d
464AN 2" 60.0 67.3 18 104 T
468AN 2-1/8" 63.0 71.3 20 104
472AN 2-1/4" 66.0 76.0 22 104
t1
476AN 2-3/8" 70.0 80.0 24 104
480AN 2-1/2" 73.0 83.0 24 104
484AN 2-5/8" 76.0 86.8 24 104
488AN 2-3/4" 78.0 91.4 24 104
D
1" DR. STANDARD 6 POINT METRIC

%
E
519M 19mm A 36 51 17 31 33 58
5 5
521M 21mm A 38 51 17 31 33 58 -
522M 22mm A 39 51 17 31 33 58 -
523M 23mm A 40 51 17 31 33 58
524M 24mm A 40 51 17 31 33 58 A
525M 25mm A 41 51 17 31 33 58
526M 26mm A 42.5 51 17 31 33 58
%
527M 27mm A 44 51 17 31 33 58
528M 28mm A 45 51 17 31 33 58
5 5
529M 29mm A 46 51 19 31 33 60
-
530M 30mm A 48 51 19 31 33 60
532M 32mm B / 51 19 31 / 60 B
533M 33mm C 53 52 21 31 30 62
535M 35mm C 54 52 21 31 30 62
536M 36mm C 56 52 21 31 30 62
538M 38mm C 58 52 21 31 30 62
%
E
540M 40mm C 60 52 21 31 30 62
541M 41mm C 61.5 52 21 31 30 62 -
542M 42mm C 63 52 23 31 30 64 5 5
546M 46mm C 68 58 23 36 30 64 -
550M 50mm C 73 58 29 36 30 70
C
552M 52mm C 75 58 29 36 30 70
554M 54mm C 78 58 29 36 30 70
555M 55mm C 79 62 31 36 30 72
556M 56mm C 80 62 33 36 30 74
558M 58mm C 85 62 34 36 30 75
560M 60mm C 87 62 35 38 30 78
566M 65mm C 93 62 36 40 30 80
570M 70mm C 98 62 40 40 33 85
SAE METRIC
SUNEX TOOLS
1" DR. STANDARD 6 POINT SAE

%
E
526 13/16" A 38 51 58
5 5
-
524 3/4" A 36 51 17 31 33 58
- 528 7/8" A 39 51 17 31 33 58
530 15/16" A 40 51 17 31 33 58
A 532 1" A 42 51 17 31 33 58
534 1-1/16" A 44 51 17 31 33 58
536 1-1/8" A 46 51 17 31 33 58
538 1-3/16" A 48 51 19 31 33 60
%
540 1-1/4" B / 51 19 31 / 60
542 1-5/16" C 53 52 21 31 30 62
5 5
544 1-3/8" C 54 52 21 31 30 62
-
546 1-7/16" C 56 52 21 31 30 62
B 548 1-1/2" C 58 52 21 31 30 62
550 1-9/16" C 60 52 21 31 30 62
552 1-5/8" C 61.5 52 21 31 30 62
554 1-11/16" C 65 52 23 31 30 64
556 1-3/4" C 66 58 23 36 30 64
%
E
558 1-13/16" C 68 58 23 36 30 64
560 1-7/8" C 70 58 25 36 30 66
-
562 1-15/16" C 72 58 27 36 30 68
5 5
564 2" C 74 58 29 36 30 70
-
566 2-1/16" C 75 58 29 36 30 70
C 568 2-1/8" C 78 58 29 36 30 70
570 2-3/16" C 80 62 32 35 30 72
572 2-1/4" C 84 62 34 35 30 75
574 2-5/16" C 86 62 34 35 30 75
576 2-3/8" C 87 62 35 38 30 78
578 2-7/16" C 89 62 35 38 30 78
580 2-1/2" C 91 62 36 40 30 80
582 2-9/16" C 93 62 36 40 30 80
584 2-5/8" C 95 62 38 40 33 82
586 2-11/16" C 97 62 38 40 33 82
588 2-3/4" C 98 62 40 40 33 85
590 2-13/16" C 100 62 40 42 33 87
592 2-7/8" C 102 62 40 42 33 87
594 2-15/16" C 104 86 48 42 38 95
596 3" C 106 86 52 40 38 98
5100 3-1/8" C 109 86 52 42 38 100
5104 3-1/4" C 113 86 52 42 38 100
5108 3-3/8" C 115 86 52 42 38 100
5112 3-1/2" C 119 86 55 44 38 105
5116 3-5/8" C 127 86 55 32 20 105
5120 3-3/4" C 130 86 55 32 20 105
5124 3-7/8" C 136 86 55 32 20 105
5128 4" C 140 86 55 32 20 105
5132 4-1/8" C 143 86 55 32 20 105
5136 4-1/4" C 146 86 55 32 20 105
5140 4-1/2" C 152 86 55 32 20 105
SUNEXTOOLS.COM
1" DR. DEEP 6 POINT SAE
%
E
524D 3/4" A 36 51 25 31 38 90
5 5
526D 13/16" A 38 51 25 31 38 90 -
-
528D 7/8" A 39 51 25 31 38 90
530D 15/16" A 40 51 25 31 38 90
A
532D 1" A 42 51 30 31 38 90
534D 1-1/16" A 44 51 30 31 38 90
536D 1-1/8" A 46 51 30 31 38 90
%
538D 1-3/16" A 48 51 35 31 38 90
540D 1-1/4" B / 51 35 31 / 90 5 5
542D 1-5/16" C 53 52 35 31 30 90 -
544D 1-3/8" C 54 52 40 31 30 90
546D 1-7/16" C 56 52 40 31 30 90 B
548D 1-1/2" C 58 52 40 31 30 92
550D 1-9/16" C 60 52 40 31 30 92
552D 1-5/8" C 61.5 52 40 31 30 92
%
E
554D 1-11/16" C 65 52 40 31 30 92
-
556D 1-3/4" C 66 58 40 31 30 92 5
5
558D 1-13/16" C 68 58 40 31 30 92 -
560D 1-7/8" C 70 58 40 31 30 92
562D 1-15/16" C 72 58 40 31 30 92 C
564D 2" C 74 58 50 31 30 95
566D 2-1/16" C 75 58 50 31 30 95
568D 2-1/8" C 78 58 50 31 30 95
570D 2-3/16" C 80 62 50 31 30 100
572D 2-1/4" C 84 62 50 31 30 100
574D 2-5/16" C 86 62 55 31 30 105
576D 2-3/8" C 87 62 55 31 30 105
578D 2-7/16" C 89 62 60 31 30 110
580D 2-1/2" C 91 62 60 31 30 110
582D 2-9/16" C 93 62 70 31 30 120
584D 2-5/8" C 95 62 70 35 33 120
586D 2-11/16" C 97 62 75 35 33 124
588D 2-3/4" C 98 62 75 35 33 124
590D 2-13/16" C 100 62 80 40 35 128
592D 2-7/8" C 102 62 80 40 35 128
594D 2-15/16" C 104 86 85 45 38 135
596D 3" C 106 86 85 45 38 135
5100D 3-1/8" C 109 86 85 45 38 135
5104D 3-1/4" C 113 86 85 45 38 135
5108D 3-3/8" C 115 86 85 45 38 135
5112D 3-1/2" C 119 86 85 45 38 135
5116D 3-5/8" C 128 86 90 32 20 140
5120D 3-3/4" C 130 86 90 32 20 140
5124D 3-7/8" C 136 86 90 32 20 140
5128D 4" C 140 95 100 32 20 155
5132D 4-1/8" C 143 95 100 32 20 155
5136D 4-1/4" C 146 95 100 32 20 155
5140D 4-1/2" C 152 95 100 32 20 155
SAE METRIC
SUNEX TOOLS
1" DR. DEEP 6 POINT METRIC

E
%
519MD 19mm A 36 51 25 31 38 90
5 5
- 521MD 21mm A 38 51 25 31 38 90
-
522MD 22mm A 39 51 25 31 38 90
524MD 24mm A 40 51 25 31 38 90
525MD 25mm A 41 51 30 31 38 90
526MD 26mm A 42.5 51 30 31 38 90
527MD 27mm A 44 51 30 31 38 90
%
529MD 29mm A 46 51 30 31 38 90
5 5
530MD 30mm A 48 51 35 31 38 90
-
532MD 32mm B / 51 35 31 / 90
B 533MD 33mm C 53 52 35 31 30 90
535MD 35mm C 54 52 40 31 30 90
536MD 36mm C 56 52 40 31 30 90
538MD 38mm C 58 52 40 31 30 92
%
E
540MD 40mm C 60 52 40 31 30 92
5
- 541MD 41mm C 61.5 52 40 31 30 92
5
- 542MD 42mm C 63 52 40 31 30 92
546MD 46mm C 68 58 40 31 30 92
C
550MD 50mm C 58 73 54 31 30 95
554MD 54mm C 78 58 54 31 30 95
555MD 55mm C 79 62 60 31 30 100
556MD 56mm C 80 62 60 31 30 100
558MD 58mm C 85 62 62 31 30 105
560MD 60mm C 87 62 62 31 30 105
565MD 65mm C 93 62 75 31 30 120
570MD 70mm C 98 62 78 31 30 124
1" DR. DEEP THIN-WALL 6 POINT SAE & METRIC

%
E

5 5 534DT 1-1/16" A 42.5 51 43 31 50 108
-
5 5
-
- 536DT 1-1/8" A 43 51 43 31 50 108

540DT 1-1/4" A 47 51 43 31 50 108
A B
542DT 1-5/16" A 49 51 43 31 50 108
548DT 1-1/2" B / 54 43 31 / 108
541MDT 41mm C 57 54 43 31 30 108
%
E
5 -
5
-
SUNEXTOOLS.COM
1" DR. EXTRA LONG 6 POINT SAE & METRIC
E
E
ITEM SIZE d D1 D D1 T L2 L1 L
%
%
540EL 1-1/4" 42 28 51 54 32 40 38 270
5
533MEL 33mm 42 28 52 54 32 40 38 270
-
-
-
1" DR. EXTRA DEEP 6 POINT SAE
%
556XD 1-3/4" 66 58 70 38 120
5
5
1" DR. SQUARE & HEAVY DUTY SQ. SAE

ITEM SIZE SHAPE d D T L2 L1 L
%
E
526S 13/16" A / 52 31 / / 57
%
530S 15/16" A / 52 31 / / 57
526HDS 13/16" B 48 56 / 35 31 68 -
-
5 -
A B
1" DR. DOUBLE SQUARE METRIC

ITEM SIZE D T t L
%
517MS 17mm 52 31 26 57
519MS 19mm 52 31 26 57
520MS 20mm 52 31 26 57
U 5
521MS 21mm 54 31 26 57
-
SAE METRIC
SUNEX TOOLS
1" DR. CONTROLLED DEPTH SAE

ITEM SIZE D T L1 L
%
548CDS 1-1/2" 60 14 31 98
5 -
1" DR. COMBINATION BUDD WHEEL

SAE & METRIC
%
%
E
5 ITEM SIZE SHAPE D T T1 T2 T3 L1 L

U U U -
-
-
5826C 1-1/2" x 13/16" A 57 14 38 34 31 / 99
- 53517 35mm x 17mm B 54 13 34 20 31 30 94
A B
53820 38mm x 20mm B 56 14 36 20 31 30 96
54121 41mm x 21mm B 58 14 38 22 31 30 99
#5 SPLINE STANDARD 6 POINT SAE

ITEM SIZE SHAPE D2 D1 L1 L T1
%
%
$
5500S 7/8" A 55 44 / 80 24
5525 15/16" A 55 44 / 80 24
5 4
5526 1-1/16" A 55 44 / 80 24

- , 5502 1-1/8" A 55 44 / 80 24
5504 1/3/16" A 55 44 / 80 24
A B 5503 1-1/4" B 55 / / 80 24
-
5534 1-5/16" B 55 / / 80 24
5533 1-3/8" C 55 57 38 80 24
5535 1-7/16" C 55 60 38 80 24
%
%
5505 1-1/2" C 55 60 38 80 24
5
5506 1-5/8" C 55 67 38 80 24
5507 1-3/4" C 65 73 38 98 38
-
5536 1-13/16" C 65 73 38 98 38
C 5508 1-7/8" C 65 73 38 98 38
5537 1-15/16" C 65 73 38 98 38
5509 2" C 65 79 38 98 38
5568 2-1/8" C 65 79 38 98 38
5572 2-1/4" C 65 86 38 106 46
5576 2-3/8" C 65 86 38 106 46
5580 2-1/2" C 86 99 38 117 57
5584 2-5/8" C 86 99 38 117 57
5588 2-3/4" C 86 99 38 117 57
5596 3" C 86 111 38 135 75
5600 3-1/8" C 86 111 38 135 75
SUNEXTOOLS.COM
#5 SPLINE STANDARD 6 POINT METRIC
-
ITEM SIZE SHAPE d D L1 L T1

5522M 22mm A 55 44 38 80 24
%
E
5524M 24mm A 55 44 38 80 24
5525M 25mm A 55 60 38 80 24 5
5
5527M 27mm A 65 73 38 98 38

-
5529M 29mm A 65 79 38 98 38 -
5530M 30mm A 65 79 38 98 38
5532M 32mm B 65 86 / 106 46 A L1
B
5533M 33mm B 65 86 / 106 46
5535M 35mm C 86 99 / 117 57
d
5538M 38mm C 86 99 / 117 57
5540M 40mm C 86 99 / 117 57
T1
5541M 41mm C 86 111 / 135 75
41
5546M 46mm C 86 111 / 135 75 L
#5 SPLINE DEEP 6 POINT SAE

-
ITEM SIZE d D T1 L1 L2 L
5548D 1-1/2" 60 55 64 38 48 105
E
%
5552D 1-5/8" 63 58 40 38 41 110
5556D 1-3/4" 68 60 75 38 41 135
5
-
#5 SPLINE EXTRA DEEP & CONTROLLED

DEPTH SAE
ITEM SIZE SHAPE D T1 L
%
5548XDH 1-1/2" A 60 55 103

5548CDS 1-1/2" B 60 14 102
U
T

-
,
A B
SAE METRIC
SUNEX TOOLS
#5 SPLINE THIN-WALL SAE

ITEM SIZE D2 D1 T1 L
%
%
5527 1-1/16" 54 42.5 25 106
5 5528 1-1/8" 54 43 25 106
5529 1-1/4" 54 47 25 106

#5 SPLINE DEEP THIN-WALL SAE & METRIC

%
E
ITEM SIZE SHAPE d D T1 L1 L
5
5542DT 1-5/16" A 49 54 25 60 106
-
5 5548DT 1-1/2" B / 55 25 / 108

- 5535MDT 35mm A 51 54 25 60 108
-
5541MDT 41mm B / 57 25 / 108

A B
#5 SPLINE SQUARE & HEAVY DUTY SQUARE SAE

ITEM SIZE d D L1 L
5532 13/16" 44 55 24 68
%
E
5500S 7/8" 44 55 24 80
5510 15/16" 46 55 24 68
-
5532HDS 13/16" 44 55 23 68

SUNEXTOOLS.COM
#5 SPLINE DOUBLE SQUARE METRIC
-
ITEM SIZE S S1 S2 d D T1 L
5517MSS 17mm 17.25 19.5 24 52 55 24 77
¡
%
E
5521MSS 21mm 21.25 24.5 29.5 52 55 24 77
4
4 5
4

#5 SPLINE COMBINATION BUDD WHEEL

ITEM SIZE S S1 D T T1 T2 L
5530 1-1/2"x13/16" 38.5 20.8 58 14 40 25 108
%
5
4
U U
4

-
#5 SPLINE EXTENSIONS E
ITEM SIZE d D T1 L
5608 8" 41 53 46 200
%
5615 15" 41 53 46 380
5
-
#5 SPLINE ADAPTORS
3 SIZE (F) SIZE (M) SHAPE D L1 L
5524 #5 Spline (F) 3/4" (M) A 53 54 87
%
%
5531 #5 Spline (F) 1" (M) B 53 61 94

- -
- -
A B
SAE METRIC
SUNEX TOOLS
224 INDEX
2343 ......................................98 2695 ......................................58

Index 2450 ......................................60 2696 ......................................57
2500 ......................................58 2698 ......................................42
118SS .................................136
2501 ......................................58 2699 ......................................44
210MZB ...............................68
2504 ......................................58 2714 ......................................67
212MZB ...............................69
2568 ......................................41 2724 ......................................66
212ZUMDL ...........................68
2569 ......................................41 2748 ......................................57
214MZB ...............................69
2611 ......................................52 2749 ......................................57
220ZUDL .............................66
2637 ......................................60 2801 ......................................68
224FTB .................................66
2637L ....................................60 2819 ......................................46
324FTB .................................37
2638 ......................................61 2820 ......................................46
1003 ....................................188
2638L ....................................61 2824 ......................................43
1006 ....................................188
2639 ......................................61 2826 ......................................47
1012 ....................................188
2639L ....................................62 2835 ......................................65
1210 ....................................188
2640 ......................................45 2837 ......................................65
1310 ....................................188
2641 ......................................46 2838 ......................................65
1330 ....................................190
2644 ......................................53 2839 ......................................65
1410 ....................................188
2645 ......................................47 2840 ......................................64
1436 ....................................103
2646 ......................................45 2842 ......................................63
1501 ....................................190
2650 ......................................48 2843 ......................................63
1520 ....................................190
2651 ......................................48 2845 ......................................52
1522 ....................................188
2652 ......................................50 2847 ......................................64
1622 ....................................189
2653 ......................................51 2848 ......................................49
1809 ......................................11
2654 ......................................55 2849 ......................................63
1810 ......................................10
2655 ......................................55 2850 ......................................97
1811 ......................................11
2657 ......................................54 2851 ......................................50
1812 ......................................11
2658 ......................................56 2852 ......................................51
1813 ......................................13
2659 ......................................54 2855 ......................................56
1814 ......................................13
2662 ......................................56 2856 ......................................54
1818 ......................................12
2665 ......................................55 2858 ......................................52
1819C ..................................125
2668 ......................................42 2880 ......................................59
1820 ......................................12
2669 ......................................44 3303GP ...............................123
1820S ....................................70
2670 ......................................49 3305 ......................................70
1822 ......................................13
2672 ......................................51 3311SR .................................26
1825 ......................................14
2673 ......................................53 3315SR .................................26
1830 ......................................12
2674 ......................................53 3326 ......................................18
1831 ......................................13
2678 ......................................48 3327 ......................................20
1848 ......................................10
2679 ......................................50 3328 ......................................21
1874 ........................................9
2690S ....................................62 3329 ......................................19
1889 ....................................106
2690SE ..................................62 3330 ......................................20
2342 ......................................37
2692 ......................................49 3337 ......................................22
SUNEX TOOLS
INDEX 225
3338 ......................................23 3653 .......................................25 3921 .....................................124

3342 ......................................17 3654 .......................................27 3930 .....................................146
3351 ......................................19 3655 .......................................29 3934 .....................................142
3358 ......................................21 3656 .......................................28 4001 .....................................134
3359 ......................................23 3657 .......................................29 4011M ...................................80
3360 ......................................20 3658 .......................................30 4050 .......................................81
3360DD .................................17 3659 .......................................30 4050M ....................................81
3361 ......................................22 3660 .......................................29 4070M ....................................80
3362 ......................................25 3670S ....................................35 4402 .....................................187
3363 ......................................25 3670SE ..................................36 4404 .....................................187
3500 ......................................27 3671 .......................................36 4405 .......................................82
3501 ......................................27 3674 .......................................22 4406 .....................................187
3504 ......................................27 3675 .......................................23 4408 .....................................187
3569 ......................................31 3677 .......................................28 4412 .....................................187
3580 ......................................16 3678 .......................................30 4412 .....................................187
3600V ..................................127 3680 .......................................21 4412 .....................................187
3605V ..................................126 3682 .......................................24 4420 .....................................187
3606V ..................................125 3690 .......................................28 4420AH ...............................187
3607V ...................................126 3691 .......................................29 4420S ..................................187
3608V ...................................128 3703V ...................................127 4421 .....................................107
3609V ...................................126 3704V ...................................127 4430 .....................................187
3610V ...................................126 3706V ...................................127 4450 .....................................187
3611V ...................................128 3830 .....................................103 4506 .......................................79
3612V ...................................128 3841 .......................................37 4507 .......................................79
3614V ...................................129 3842 .....................................104 4626 .......................................82
3617V ...................................128 3879 .....................................105 4632 .......................................81
3621V ...................................129 3900 .....................................230 4667 .......................................82
3622V ...................................129 3901 .....................................230 4680 .......................................78
3623V ...................................129 3903 .....................................230 4681 .......................................79
3640 .......................................34 3904 .....................................230 4682 .......................................80
3641 .......................................35 3905 .....................................231 4683 .......................................77
3643 .......................................35 3906 .....................................231 4684 .......................................77
3644 .......................................33 3907 .....................................231 4685 .......................................77
3645 .......................................34 3908 .....................................231 4686 .......................................78
3646 .......................................32 3909 .....................................232 4687 .......................................79
3647 .......................................32 3911 .....................................232 4692 .......................................76
3648 .......................................33 3912 .....................................221 4696 .......................................75
3649 .......................................32 3916 .....................................232 4910A ..................................195
3650 .......................................24 3918 .....................................233 4940A ..................................195
3651 .......................................25 3919 .....................................233 4998 .....................................194
3652 .......................................24 3920 .....................................146 5000A ..................................229
SUNEXTOOLS.COM
226 INDEX
5001A ..................................228 6614 .....................................182 8300GB ...............................192

5002A ..................................228 6616 .....................................194 8400 .....................................192
5003 .....................................229 6620 .....................................182 8504 .....................................227
5041B ..................................193 6622 .....................................183 8505 .....................................227
5081B ..................................193 6623 .....................................183 8507 .....................................226
5153DD ................................ 43 6635 .....................................184 8509 .....................................226
5207 .....................................191 6710 .....................................182 8511 .....................................227
5208A ..................................191 6722 .....................................183 8514 .....................................226
5218 .....................................191 6744 .....................................184 8515 .....................................228
5221 .....................................191 6808BD ................................189 8727 .....................................222
5222 .....................................191 6809 .....................................189 8737 .....................................222
5606 .......................................87 6810 .....................................189 8750 .....................................192
5607 .......................................87 7700B ..................................185 8810 .....................................233
5626 .......................................89 7708 .....................................193 8812 .....................................234
5681 .......................................87 7709 .....................................193 8813 .....................................234
5685 .......................................88 7740B ..................................186 8814 .....................................234
5688 .......................................88 7750B ..................................186 8817 .....................................234
5690A ....................................88 7752C ..................................186 8844 .....................................123
5692 .......................................86 7790 ....................................186 8845 .....................................123
5693 .......................................86 7793B ..................................185 8846 .....................................124
5699 .......................................86 7796 .....................................185 9002B ..................................220
5712 .....................................238 7798 .....................................185 9004A ..................................220
5712BT ................................238 8003SC ................................169 9604 .....................................152
5720 .....................................238 8004 .....................................175 9605M ..................................150
5720AH ...............................238 8005SC ................................169 9606M ..................................151
5730 .....................................238 8009 .....................................174 9610 .....................................162
5740 .....................................239 8011 .....................................174 9611 .....................................161
5740AH ...............................239 8013A ..................................170 9612 .....................................161
5740EP ................................239 8013ADELUXE ....................170 9613 .....................................161
5750 .....................................239 8013LS ................................175 9614 .....................................161
5750AH ...............................239 8019 .....................................173 9615 .....................................162
5750EP ................................239 8034 .....................................168 9616 .....................................162
6602ASJ ..............................178 8035 .....................................169 9617 .....................................163
6602LP ................................180 8035XT ................................171 9618 .....................................163
6603 .....................................181 8036 .....................................168 9704 .....................................145
6603ASJ ..............................179 8045 .....................................171 9707 .....................................151
6603LP ................................180 8054 .....................................172 9707M ..................................152
6604 .....................................182 8057 .....................................172 9708 .....................................161
6606 .....................................182 8060 .....................................173 9710M ..................................161
6609 .....................................182 8259 .....................................192 9714 .....................................150
6613A ..................................179 8300DP ................................193 9715 .....................................150
SUNEX TOOLS
INDEX 227
9720 .....................................159 9927 .....................................156 19000C ................................107

9721 .....................................159 9928 .....................................147 19100C ................................107
9722 .....................................160 9929 .....................................147 19200NLE ...........................114
9723 .....................................138 9930 .....................................154 20080 ...................................114
9724 .....................................148 9930M ..................................154 20250 ...................................133
9726 .....................................138 9933 .....................................148 28002C ................................112
9727 .....................................162 9935 .....................................158 28002D ................................113
9729 .....................................140 9935M .................................158 28102D ................................113
9730 .....................................160 9937 .....................................155 29002C ................................111
9732 .....................................139 9940 .....................................158 29002D ................................112
9734 .....................................140 9940M ..................................159 29102C ................................111
9735 .....................................139 9950 .....................................157 29102D ...............................112
9740 .....................................160 9950M ..................................157 29202NLE ...........................115
9803 .....................................145 10000 .....................................94 30080 ...................................114
9804 .....................................145 10001 .....................................94 30250 ..................................131
9805 .....................................145 10002 .....................................94 38001C ................................109
9809 .....................................157 10003 .....................................69 38001D ................................110
9813 .....................................142 10004 .....................................67 38101C ................................109
9828 .....................................139 10005 .....................................38 38101D ................................111
9829 .....................................135 10006 .....................................69 39001C ................................108
9834 .....................................146 10007 .....................................38 39001D ................................110
9835 .....................................140 10008 .....................................38 39101C ................................109
9838 .....................................146 10009 .....................................94 39101D ................................110
9839 .....................................141 10010 .....................................94 39201NLE ...........................114
9840 .....................................141 10011 .....................................95 40600 ...................................134
9841 .....................................141 10080 ...................................113 57100AH .............................240
9842 .....................................141 10200 .....................................68 57100EP ..............................240
9843 .....................................142 10202 .....................................97 66037 ...................................181
9857T ...................................135 10203 .....................................67 66037JPK.........................181
9858M .................................134 10204 .....................................97 66175FASJ ..........................178
9859 .....................................134 10205 .....................................95 80810 .....................................14
9913 .....................................125 10206 .....................................95 87602 ...................................222
9914 .....................................155 10207 .....................................95 97010 ...................................151
9914M .................................155 10208 .....................................97 185055 .................................241
9915 .....................................152 10209 .....................................96 ACS10 ..................................223
9916 .....................................156 10210 .....................................67 SX25 ....................................223
9917M .................................153 10212 .....................................37 SX76 ....................................221
9917MPR ............................153 10213 .....................................96 SX106B ................................215
9918M .................................153 10214 .....................................96 SX111 ..................................198
9919M .................................154 18000C ................................108 SX113 ..................................216
9926 .....................................156 18100C ................................108 SX160 ..................................216
SUNEXTOOLS.COM
228 INDEX
SX203N ................................218
SX211A ................................204
SX221B ................................218
SX223 .................................217
SX227B ...............................214
SX230B ...............................205
SX231B ...............................204
SX231P ...............................200
SX231P-2 ............................201
SX232B ................................207
SX233A ................................213
SX235KTB ...........................210
SX243 ..................................211
SX245K ...............................208
SX246 ..................................212
SX247 ..................................212
SX264 ..................................206
SX264K ...............................206
SX275B ...............................211
SX278C ...............................215
SX280 ..................................214
SX288C ...............................219
SX301B ...............................205
SX545B ...............................217
SX556-6 ...............................203
SX821A ...............................199
SX0918T ..............................209
SX1000 ................................221
SX1819T ..............................209
SX1819TV ............................210
SX4335 ................................199
SX4345 ................................202
SX4348 ................................201
SX4355 ................................202
SX4360-6 .............................203
SX5203 ................................205
SX5206 ................................207
SX5210 ................................208
SX6210 ................................213
SX8200 ................................219
SXMC12 ..............................200
SXMC38 ..............................198
SUNEX TOOLS
SUNEX® TOOLS
Warranties
Sunex backs each tool we make with an outstanding warranty to match. No matter
NOTES by choosing a tool that’s
what job you’re facing, you can work with confidence
guaranteed not to let you down.
Sunex Tools with a Lifetime Warranty are warrantied

against defects in materials and workmanship for the
LIFETIME life of the product. This warranty does not apply to
WA R R A N T Y
items that have been misused, abused, altered in any
way, or worn out from use.
Sunex Tools with a Two-Year Warranty are covered for

a period of two years, during which time, we will repair
2 YEAR or replace at our option any part or unit which proves to
WA R R A N T Y
be defective in material or workmanship.
Sunex Tools with a One-Year Warranty are covered for

a period of one year, during which time, we will repair or
1 YEAR replace at our option any part or unit which proves to be
WA R R A N T Y
defective in material or workmanship.
This industry-leading warranty program allows our loyal customers to quickly and easily swap
out defective product directly with Sunex®. The SUNEXpress™ warranty program covers any
manufacturer defects on your qualified Sunex product. For complete information on SUNEXpress
and qualifying products, please visit sunextools.com/sunexpress.
www.sunextools.com
Shipping Address: Sunex Tools • 315 Hawkins Rd. • Travelers Rest, SC 29690
Mailing Address: Sunex Tools • PO Box 1233 • Travelers Rest, SC 29690
Sunex Tools® Service: 877.786.3939 • Toll Free: 1.800.833.7869
Fax: 864.834.7954
Part #: SUNCATALOG18
Rev. 08/18

Sunex Catalog 2018

Uploaded by

Copyright:

Available Formats

Sunex Catalog 2018

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sunex Catalog 2018

Uploaded by

Copyright:

Available Formats

PRODUCT CATALOG

The start of the millennium opened

HAND TOOLS 101

IMPACT SOCKET SPECS 243

NO-SKIP SIZE SPECTRUM

1/4" DRIVE SAE & METRIC

MODEL SIZE MODEL SIZE

MODEL SIZE MODEL SIZE

1/4" DRIVE SAE

1/4" DRIVE SAE

1/4" DRIVE METRIC

1/4" DRIVE METRIC

MODEL SIZE MODEL SIZE

Includes: Universal Joint (1800), 2" Extension (1802)

1/4" DRIVE SAE

1/4" DRIVE SAE

1/4" DRIVE METRIC

1/4" DRIVE METRIC

1/4" DRIVE 8/10mm

1/4" DRIVE INDIVIDUAL STAR SOCKETS

MODEL SIZE MODEL SIZE

1/4" DRIVE INDIVIDUAL

1/4" DRIVE INDIVIDUAL

1/4" DRIVE INDIVIDUAL

METRIC MODEL MODEL MODEL MODEL MODEL MODEL

1/4" DRIVE INDIVIDUAL

MODEL SIZE MODEL SIZE

MODEL SIZE MODEL SIZE

Includes: 1/2"(F) x 3/8"(M) Adapter (2301), 3" Extension (3503)

3/8" DRIVE SAE & METRIC STANDARD

MODEL SIZE MODEL SIZE MODEL SIZE MODEL SIZE

Includes: Universal Joint (3301), 3" Extension (3503)

MODEL SIZE MODEL SIZE

Includes: Universal Joint (3301)

3/8" DRIVE 12 POINT SAE

MODEL SIZE MODEL SIZE

Includes: 3/8" Dr. Universal Joint (3301)

308M 8mm 316MD 16mm (DEEP) MODEL SIZE MODEL SIZE

Includes: Universal Joint (3301), 3" Impact Extension Bar (3303),

MODEL SIZE MODEL SIZE

Includes: Universal Joint (3301)

3/8" DRIVE SAE STANDARD

MODEL SIZE MODEL SIZE

3/8" DRIVE SAE MID-DEPTH

MODEL SIZE MODEL SIZE

3/8" DRIVE 12 POINT SAE DEEP

MODEL SIZE MODEL SIZE

3/8" DRIVE METRIC

MODEL SIZE MODEL SIZE

3/8" DRIVE METRIC MID-DEPTH

MODEL SIZE MODEL SIZE

MODEL SIZE MODEL SIZE

3/8" DRIVE 12 POINT

MODEL SIZE MODEL SIZE

3/8" DRIVE SAE DEEP

MODEL SIZE MODEL SIZE

3/8" DRIVE 12 POINT METRIC

MODEL SIZE MODEL SIZE

3/8" DRIVE 12 POINT