Netvox LoRa Catalog PDF

R
Netvox LoRa Sensors & Devices

Wireless Sensor Network Based on LoRa Technology
Product Catalogue
2019
Intellectual System Based on LoRa Technology
What is LoRa?
LoRa technology was developed by a company called Semtech and
it is a new wireless protocol designed specifically for long-range, low-power
communications. LoRa stands for Long Range Radio and is mainly
targeted for M2M and IoT networks. This technology will enable public or
multi-tenant networks to connect a number of applications running on the
same network.
LoRa Alliance was formed to standardize LPWAN (Low Power Wide

Area Networks) for IoT and is a non-profit association which features
membership from a number of key market shareholders such as CISCO,
actility, MicroChip, IBM, STMicro, SEMTECH, Orange mobile and many
more. This alliance is key to providing interoperability among multiple
nationwide networks.
Each LoRa gateway has the ability to handle up to millions of nodes.

The signals can span a significant distance, which means that there is less
infrastructure required, making constructing a network much cheaper and
faster to implement.
LoRa also features an adaptive data rate algorithm to help

maximize the nodes life and network capacity. The LoRa protocol includes
a number of different layers including encryption at the network,
application and device level for secure communications.
Specification LoRa Feature

2-5Km Urban (1.24-3.1 mi),
Range
15Km suburban (9.3 mi)
Frequency ISM 868/915 MHz
Standard IEEE 802.15.4g

Spread spectrum modulation type based on FM
Modulation
pulses which vary.
Capacity One LoRa gateway takes thousands of nodes
Long life
Frequency, power, modulation and signaling between2
LoRa Physical layer
nodes and gateways
Where does LPWAN fit?
One technology cannot serve all of the projected applications and volumes
for IoT. WiFi and BTLE are widely adopted standards and serve the
applications related to communicating personal devices quite well. Cellular
technology is a great fit for applications that need high data throughput and
have a power source. LPWAN offers multi-year lifetime and is designed for
sensors and applications that need to send small amounts of data over long
distances a few times per hour from varying environments.
Important Factors in LPWAN?
The most critical factors in a LPWAN are:

 Network architecture
 Communication range
 lifetime or low power
 Robustness to interference
 Network capacity (maximum number of nodes in a network)
 Network security
 One-way vs two-way communication
 Variety of applications served
3
Reference: https://docs.wixstatic.com/ugd/eccc1a_ed71ea1cd969417493c74e4a13c55685.pdf
What is LoRaWAN™?
LoRaWAN™ defines the communication protocol and system architecture
for the network while the LoRa® physical layer enables the long-range
communication link. The protocol and network architecture have the most
influence in determining the lifetime of a node, the network capacity, the
quality of service, the security, and the variety of applications served by the
network.
Application
LoRa® MAC
MAC options
Class A Class B Class C
(Baseline) (Baseline) (Continuous)
LoRa® Modulation
Regional ISM band
EU 868 EU US AS —
433 915 430
Network Architecture
Many existing deployed networks utilize a mesh network architecture. In a
mesh network, the individual end-nodes forward the information of other
nodes to increase the communication range and cell size of the network.
Netvox Network Architecture
While this increases the range, it also adds complexity, reduces network
capacity, and reduces lifetime as nodes receive and forward information
from other nodes that is likely irrelevant for them. Long range star
architecture makes the most sense for preserving lifetime when long-range
connectivity can be achieved.
In a LoRaWAN™ network nodes are not associated with a specific gateway.

Instead, data transmitted by a node is typically received by multiple
gateways. Each gateway will forward the received packet from the end-node
to the cloud-based network server via some backhaul (either cellular,
Ethernet, satellite, or Wi-Fi).
The intelligence and complexity is pushed to the network server, which

manages the network and will filter redundant received packets, perform
security checks, schedule acknowledgments through the optimal gateway,
and perform adaptive data rate, etc.
If a node is mobile or moving there is no handover needed from gateway

to gateway, which is a critical feature to enable asset tracking applications–a
major target application vertical for IoT.
5
LoRaWAN™ Regional Summery
The LoRaWAN™ specification varies slightly from region to region based on

the different regional spectrum allocations and regulatory requirements.
The LoRaWAN™ specification for Europe and North America are defined,
but other regions are still being defined by the technical committee.
Joining the LoRa® Alliance as a contributor member and participating in the

technical committee can have significant advantages to companies targeting
solutions for the Asia market.
LoRaWAN™ Features
Long Range Max Lifetime
1. Greater
1.
than cellular 4. Low power optimized
2. Deep indoor coverage 5. 10-20yr lifetime
3. Star topology 6. >10x vs cellular M2M
Multi-Usage Low Cost
7. High capacity 10. Minimal infrastructure

8. Multi-tenant 11. Low cost end node
9. Public network 12. Open SW
Table of Contents
Page
GW
14 R206 Wireless IoT Controller
15 R206A Wireless Dual-Mode IoT Controller
Security
16 R311A Wireless Door/Window Sensor
17 R311D Wireless Asset Sensor
18 R312 Wireless Door Bell Button
19 R312A Wireless Emergency Button
20 R718F Wireless Reed Switch Open/Close Detection Sensor
21 R718F2 Wireless 2-Gang Reed Switch Open/Close Detection Sensor
22 R311E Item Movement Sensor
23 R311G Wireless Light Sensor
24 R311K Wireless Object Fall Detection Sensor
25 R311W Wireless Water Leak Detector
26 RB11E Wireless Occupancy/Light/Temperature Sensor
27 RA02A Wireless Smoke Detector
28 RA02C Wireless CO Detector
29 RB02I Wireless Emergency Push Button
30 R602A Wireless Siren
31 R718DA Wireless Vibration Sensor, Rolling Ball Type
32 R718DA2 Wireless 2-Gang Vibration Sensor Rolling Ball Type
33 R718DB Wireless Vibration Sensor, Spring Type
34 R718DB2 Wireless 2-Gang Vibration Sensor, Spring Type
35 R718T Wireless Push Button Interface
36 R718T2 Wireless 2-Input Push Button Interface
Environmental Monitoring
37 R311B Wireless Light Sensor
38 R311CA Wireless Dry Contact Sensor
39 R311CB Wireless Window Sensor with Glass Break Detector
40 R311CC Wireless 2-Gang Door/Window Sensor
41 R311WA Wireless Seat Occupancy Sensor
42 R718PQ Wireless Short-Range Occupancy Sensor
43 R718PQA Wireless Toilet Occupancy Sensor
44 R718VA Wireless Flush Toilet /Washing Liquid Bottle/Toilet Paper
45 R718VB Wireless Flush Toilet /Washing Liquid Bottle/Toilet Paper/Non-metallic pipe
46 R711 Wireless Temperature and Humidity Sensor
47 R712 Wireless Outdoor Temperature and Humidity Sensor
48 R718A Wireless Temperature and Humidity Sensor For Low Temperature Environment
49 R718AB Wireless Temperature and Humidity Sensor
50 R718AD Wireless Temperature Sensor
51 R718B Wireless Resistance Temperature Detector
52 R718B2 Wireless 2-Gang Resistance Temperature Detector
53 R718CK Wireless Thermocouple Sensor - Type K
54 R718CN Wireless Thermocouple Sensor - Type N
55 R718CR Wireless Thermocouple Sensor - Type R
56 R718CT Wireless Thermocouple Sensor - Type T
57 R718CK2 Wireless 2-Gang Thermocouple Sensor - Type K
58 R718CN2 Wireless 2-Gang Thermocouple Sensor - Type N
59 R718CR2 Wireless 2-Gang Thermocouple Sensor - Type R
60 R718CT2 Wireless 2-Gang Thermocouple Sensor - Type T
61 R718G Wireless Light Sensor
62 R718PA1 Wireless CO Sensor
63 R718PA2 Wireless NO Sensor
64 R718PA3 Wireless O3 Sensor
65 R718PA4 Wireless H2S Sensor 8
66 R718PA5 Wireless NO2 Sensor
67 R718PA6 Wireless SO2 Sensor
Table of Contents
Environmental Monitoring
68 R718PA7 Wireless Noise Sensor
69 P718PA8 Wireless PH Sensor
70 R718PA9 Wireless ORP Sensor
71 R718PA10 Wireless Turbidity Sensor
72 R718PA11 Wireless Liquid Level Sensor
73 R718PA12 Wireless Seawater Sensor
74 R718PA22 Wireless Bottom-installed Ultrasonic Liquid Level Sensor
75 R718PB13 Wireless Soil Moisture Sensor
76 R718PB14 Wireless Soil Moisture/Temperature/Electrical Conductivity Sensor
77 R718PB15 Soil Temperature and Humidity, Conductivity Sensor
78 R718PB15A Wireless Soil Moisture/Temperature/Electrical Conductivity Sensor with a
Waterproof Housing
79 R718WA Wireless Water Leak Detector
80 R718WA2 Wireless 2-Gang Water Leak Detector
81 R718WB Wireless Water Leak Detector with Rope Sensor
82 R718WB2 Wireless 2-Gang Water Leak Detector with Rope Sensor
83 R718WBA Wireless Water Leak Detector (Rope Sensor) with Temperature and Humidity Sensor
84 R72611 Wireless Outdoor Liquid Level Sensor with Solar Panel
85 R72615 Wireless Outdoor CO2/Temperature/Humidity Sensor with Solar Panel
86 R72615A Wireless CO2/Temperature/Humidity Sensor
87 R72616 Wireless Outdoor PM2.5/Temperature/Humidity Sensor with Solar Panel
88 R72616A Wireless PM2.5/Temperature/Humidity Sensor
89 R72623 Wireless Outdoor PM2.5/Noise/Temperature/Humidity Sensor with Solar Panel
90 R72624 Wireless Outdoor Noise/Temperature/Humidity Sensor with Solar Panel
91 RA0715Y Wireless Outdoor CO2/Temperature/Humidity Sensor
92 RA0716Y Wireless Outdoor PM2.5/Temperature/Humidity Sensor
93 RA0723Y Wireless Outdoor PM2.5/Noise/Temperature&Humidity Environment Sensor
94 RA07W Wireless Water Leak Detection and Location Sensor
95 RA0701 Wireless CO Sensor
96 RA0708 Wireless pH Sensor
97 RA0710 Wireless Turbidity Sensor
98 RA0711 Wireless Liquid Level Sensor
99 RA0713 Wireless Soil Moisture Sensor
100 RA0715 Wireless CO2/Temperature/Humidity Sensor
101 RA0716 Wireless PM2.5/Temperature/Humidity Sensor
102 R720A Wireless Temperature and Humidity Sensor For Low Temperature Environment
103 R720B Wireless Temperature and Humidity Sensor with Activity Detection Sensor
104 R720C Wireless Air Pressure and Temperature Sensor
Control / Dada Collection
105 R211 Wireless IR Blaster
106 R311FA Wireless Activity Detection Sensor
107 R311FB Wireless Activity Event Counter
108 R311FC Wireless Activity Timer
109 R718E Wireless Accelerometer and Surface Temperature Sensor
110 R718IA Wireless 0-5V ADC Sampling Interface
111 R718IA2 Wireless 2-Input 0-5V ADC Sampling Interface
112 R718IB Wireless 0-10V ADC Sampling Interface
113 R718IB2 Wireless 2-Input 0-10V ADC Sampling Interface
114 R718J Wireless Dry Contact Interface
115 R718J2 Wireless 2-Input Dry Contact Interface
116 R718H Wireless Pulse Counter Interface
117 R718H2 Wireless 2-Input Pulse Counter Interface
118 R718LB Wireless Hall Type Open/Close Detection Sensor
119 R718LB2 Wireless 2-Gang Hall Type Open/Close Detection Sensor
120 R718MA Wireless Asset Sensor
9
Table of Contents
Control / Dada Collection
126 R718PC Wireless RS485 Adapter
127 R718PDA Wireless RS232 Adapter
128 R718N1 Wireless 1-Phase Current Meter with 1 x 30A Soild Core CT
129 R718N17 Wireless 1-Phase Current Meter with 1 x 75A Clamp-On CT
133 R718N3 Wireless 3-Phase Current Meter with 3 x 60A Solid Core CT
138 R718IJK Wireless ADC / Dry Contact / Current Detector
139 RA10 Wireless Valve
140 R809A Wireless Plug-and-Play Power Outlet with Consumption Monitoring
141 R809A01 Wireless Plug-and-Play Power Outlet with Consumption Monitoring
(Power-off alarm)
142 R816B Wireless US Type Wall Socket with Power Meter
143 R816B01 Wireless US Type Wall Socket with Power Meter (Power-off alarm)
LoRa Module
144 R100H LoRa Module
145 R100L LoRa Module
Note.
*1. Actual data sheet value may vary depending on developing progress and other variables.
Please contact sales department for detail data sheet document.
Copyright©Netvox Technology Co., Ltd.

This document contains proprietary technical information which is the property of NETVOX Technology.
It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part,
without written permission of NETVOX Technology.
The specifications are subject to change without prior notice.
10
Frequency Characters for All Netvox LoRa Devices
The LoRa frequency characters are shown as below. Applicable to all Netvox
LoRa Devices which are equipped with SX1276 wireless communication
module.
11
The LoRa frequency characters are shown as below. Applicable to all Netvox
LoRa Devices which are equipped with SX1276 wireless communication
module.
LoRa Frequency Characters

TX Power 19dBm±1dBm
Rx Sensitivity -136dBm
(LoRa，Spreading Factor=12，Bit Rate=293bps )
-121dBm
(FSK, Frequency deviation=5kHz, Bit Rate=1.2kbps)
Antenna Type Built-in antenna
Communication Range Up to10 km, the actual transmission distance depends on
the environment.
Data Transfer Rate 0.3kbps～50kbps
Spread Technique LoRa/FSK
Available Frequency EU863-870，US902-928，AU915-928，
KR920-923，AS923，CN470-510
Configured before shipment
12
Note.
*1. Actual data sheet value may vary depending on developing progress and other variables.
Please contact sales department for detail data sheet document.
Copyright©Netvox Technology Co., Ltd.

This document contains proprietary technical information which is the property of NETVOX Technology.
It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part,
without written permission of NETVOX Technology.
The specifications are subject to change without prior notice.
13
Wireless IoT Controller
R206
R206 is a highly reliable cloud-based wireless
smart gateway. As the core of the entire wireless
smart IoT system, R206 is the first to achieve the
perfect combination of cloud technology, WiFi
mobile networking technology and LoRa wireless
IoT technology.
Third-party software can control the device
through R206, such as R206 and Android client
can achieve mode control. At the same time, users
can monitor all changes in the network by
accessing R206 through the cloud.
** Only used in Netvox M2 private LoRa Solution
** The LoRaWAN gateway is not supported
Technical Parameter
14
* Actual range may vary depending on environment.
** Life is determined by sensor reporting frequency and other variables.
Wireless Dual-Mode IoT Controller
R206A
R206A is a smart gateway for Samrt and high reliability.
As the core of the entire Samrt system, R206A is the
first to achieve the perfect combination of cloud
technology / WiFi and Netvox LoRa / ZigBee
proprietary protocol Internet of Things.
R206A acts as a gateway in the LoRa network and can
be automatically screened and configured. Third-party
software can control the device through it, for example,
the Android client side can achieve mode control. At the
same time, users can monitor all the changes of devices
through the cloud access R206A.
** Only used in Netvox M2 private LoRa Solution
** The LoRaWAN gateway is not supported
Technical Parameter
Electric
Working Power Input: 100～240V AC
Output: 12V/1.5A DC（Power Adapter)
Power Consumption 2.2W（28mA @230V 50Hz） (typical)
Frequency
LoRa ZigBee WiFi
Frequency Range 410-525MHz 2.4～2.4835 GHz 2.4～2.4835 GHz
862-1020MHz
(User can select the desired
frequency band)
Communication ( Users can choose according 16 11, 13 or 14
Channel to their needs ) ISM 11th ～26th Ch1—2412MHz
channel Ch2—2417MHz
Ch3—2422MHz
～
Ch14—2477MHz
Bandwidth TBD 2MHZ 20/40MHz
Antenna Type Built-in antenna Built-in antenna Built-in PCB antenna
TX Power 19dBm±1dBm 7dBm （Max.） 18.5dBm
( maximum, can be set (maximum, can be set 15
according to requirements ) according to requirements )

Wireless Door/Window Sensor
R311A
When the window is opened, R311A sends alarm

message to the control center. R311A utilizes the
latest ultra-low power consumption technology
and requires no wiring. It requires just button
batteries to support its operation.
The communication method is compatible with
LoRaWAN™ protocol (ClassA).
R311A has been LoRaWAN ™ certified.
Technical Parameter
Input Power 2 x 3.0V CR2450 button batteries
Working Voltage DC 2.4V～3V

Standby Current 12uA/3.0V
Transmitting Current (max) 120mA/3.0V
Receiving Current (max) 11mA @3.0V
Low Voltage Threshold 2.4V
Voltage Measurement Accuracy ±0.1V
Main Body Dimension 57mm x 35mm x 15mm

Magnet Dimension 43mm x 13mm x 12mm
Weight 43.8g
Operating Temperature -20℃ ～ 55℃
Environment Humidity Range <90% RH (No condensation)

Storage Temperature -40℃ ～ 85℃
16
Wireless Asset Sensor
R311D
The device is a simple positioning function (which
can detect the position status of the device),
periodically reports RSSI and SNR information to
the gateway for processing and can locate the
position status of the device according to the
reported RSSI and SNR information, and adopts
SX1276 wireless communication module.
Technical Parameter
Input Power 2pcs 3.0V CR2450 button battery
Working Voltage DC 2.4V～3.0V

Standby Current 16uA /3.0V
Transmitting Current (max) 120mA / 3.0V
Receiving Current (max) 11mA / 3.0V
Battery Voltage Measurement
±0.1V
Accuracy
Physical
Main Body Dimension 57mm x 35mm x 15.2mm
Weight 48.9 g

17
Wireless Door Bell Button
R312
The wireless doorbell switch of this device adopts a
tact switch, which is easy to operate and easy to
carry. When the wireless doorbell switch is pressed,
the module's IO port KEY1 (the 19th pin of U1)
detects a low level. When the wireless doorbell
switch is released, the module's IO port KEY1 (the
19th pin of U1) A high level was detected.
Main Feature
• 2 section 3.0V CR2450 button batteries in parallel
• Adopt SX1276 wireless communication module
• Simple operation, no wiring required
Application scenario
• Villa; office; hotel; apartment
Technical Parameter
2 sections of 3V CR2450 button batteries in parallel

Input Power
(single CR2450 battery capacity 620mah)

Weight 45g

18
Wireless Emergency Button
R312A
The R312A is an emergency button switch device
that detects the closing or opening signal of the
emergency button switch and sends an alarm
signal to the gateway for processing. It uses the
Main Feature
•2 3.0V CR2450 button batteries in parallel
•Adopt SX1276 wireless communication module
•Easy to fix and carry with key ring
•Emergency button switch device
•Fire alarm
•other
Technical Parameter

Input Power

Weight 45g

19
Wireless Reed Switch Open/Close Detection Sensor
R718F
R718F utilizes a reed switch to
detect whether two objects are separated or
not. An example of R718F’s application is
to detect the state of a door or window for
security purposes. It is based on SX1276
wireless communication module, and the
communication is fully compatible with
LoRaWAN™ protocol (Class A).
Main Feature
•Body protection class IP65, sensor protection class IP65
•The base is attached with a magnet that can be attached to a ferrous
object
•Battery life is 5 years (condition: ambient temperature 25 ° C, 15 min
report once, txpower = 20 dBm, LoRa spreading factor SF = 10)
•Opening and closing objects such as doors and windows
Technical Parameter
2 x 3.6V ER14505 AA lithium batteries

Input Power
(3.6V2400mah/section）
Sleeping Mode 20 uA
Wake up Mode 6.3mA@3.3V
±0.1V
Accuracy
Dimension Main Part: L: 112mm*W: 65mm*H: 32mm

Weight 141g
Environment Temperature Range -20℃ ～ 55℃
20
Wireless 2-Gang Reed Switch Open/Close Detection
Sensor
R718F2
R718F2 utilizes a reed switch to detect whether two
objects are separated or not. An example of R718F2
application is to detect the state of a door or window for
security purposes. It is based on SX1276 wireless
communication module, and the communication is fully
compatible with LoRaWAN™ protocol (Class A).
Main Feature
•The base is attached with a magnet that can be attached to a ferrous
object
•Battery life is 5 years (condition: ambient temperature 25 ° C, 15 min
report once, txpower = 20 dBm, LoRa spreading factor SF = 10)
•2-way reed switch sensor
•Opening and closing objects such as doors and windows
Technical Parameter

Input Power
Sleeping Mode 26uA
±0.1V
Accuracy

Weight 150g
21
Item Movement Sensor
R311E
The output current of the photosensor changes in
the same direction as the ambient light intensity
changes, and the module can detect the light
intensity signal according to the change signal. The
moving sensor is equivalent to a closed switch when
it is in a stationary state. When it is in a tilting or
vibrating state, the moving sensor is in a constant
switching state, and the module detects a rapidly
changing pulse signal to judge the object to vibrate
or move.
Main Feature
•2 3.0V CR2450 button batteries in parallel
•Smart farm; smart home; other
Technical Parameter

Input Power

Weight 45g

22
Wireless Light Sensor
R311G
R311G has a built-in photosensitive sensor, and it
measures external ambient light intensity. It can work
with other devices to perform wireless dimming functions,
and the wireless communication is compatible with
R311G is an ambient light sensor which reports the light
level periodically.
R311G has been LoRaWAN ™ certified.
Main Feature
•Built-in light sensor
•Easy to install and compact
•Provides years of battery life with just two
button batteries
•Communication distance up to 10Km
Technical Parameter

Operating Power DC V～3V
Receiving Current (max) 11mA/3.0V
Brightness Detecting Range 1～3000LUX
Weight 32.3g
23
Wireless Object Fall Detection Sensor
R311K
This device is an object fall detection sensor. When the
device (defaults to the vertical direction ) has a tilt of 45
degrees or more in any direction, a tilt signal will be
issued. The detected data is transmitted to other devices
for display via the wireless network .
Main Feature
 Detect home electrical device falls and power

protection
 Columns, poles and other applications such as tilt

sensing, angle detection, direction discrimination,
etc.
Technical Parameter
Electrical Characteristics
Input power source 2 x 3.0V CR2450 button battery
Work electric voltage range DC +2. 4 V to 3.0V
Current TBD
Emission current (max) 120mA / 3.0V
Receiving current (max) 11mA/ 3.0V
Battery measurement accuracy ± 0.1V
Tilt Sensor Characteristics

Contact capacity 3-24VDC / less than 10mA
Conversion angle 45±5 degrees
Contact resistance Less than 10 ohms
Insulation resistance More than 100 megohms
Operating temperature -40°C to 85 °C
Installation type Suitable for PCB vertical
Note: Conversion angle = 45±5 degrees, error may be due to installation or other factors.
Please confirm whether it is applicable before use.
24
Wireless Water Leak Detector
R311W
Netvox Wireless Water Sensor R311W is a LoRaWAN™
device compatible with LoRaWAN™ protocol (ClassA).
When the R311W sensor detects the leak, it will send an
alarm message to the gateway. When the sensor detects no
leaks, it will send a message that shows no leak to the
gateway. R311W has been LoRaWAN™ certified.
Main Feature
•Power: 2 x cr2450 button battery
•Simple device configuration and easy operation
Technical Parameter
Operation Voltage DC +2.4V～3.0V

Voltage Measurement ±0.1V
Water Leakage Material UL2468 28AWG

Water Line Maximum
80°C
Temperature
Water Line Weight 5g
Water Line Core resistance 1.3 Ohm / meter
Water Line Diameter 1mm
Water Line Length 1000mm (±5mm)
Water Line Flame Rating VW-1
25
Wireless Occupancy & Temperature & Light Sensor
RB11E
RB11E is a long distance LoRaWAN™ PIR-based device (Class A).
RB11E combines motion detection, temperature, and illumination
sensors. With real-time motion detection, RB11E senses the movement
of people, animal or other objects, and if a person or an object moves in
the monitoring area, RB11E will detect the infrared signal and report
the status information to the gateway. Users can execute different
instructions or scenes according to different configurations. RB11E also
reports temperature and light level. It is mainly used for indoor
detection.
RB11E has been LoRaWAN™ certified.
Main Feature
•2 ER14505 lithium batteries (3.6V / section) parallel power supply
•Detection angle: 110 degrees horizontally and 60 degrees vertical.
•Mechanical rotation angle is 40 degrees
•Built-in tamper switch, light sensor, temperature sensor
•Detection speed: ≥0.2 m (M) / sec (S) movement speed has alarm output
• Building automation
• Condition monitoring
• Predictive maintenance
• Security, medical, etc.
Power Supply 2pcs of 3.6V ER14505 AA

Operating Voltage Range 3V～3.6V
Standby Current 110uA
Transmitting Current (max) 120mA
Receiving Current (max) 11mA
Measurement Accuracy ±0.1V
Dimension 78mm*78.8mm*82.2mm
Weight 125.8g
Operating Humidity ＜90%RH
Operating Temperature -20°C ～ 55°C
Storage Temperature -40°C ～ 85°C
Built-in Devices Tamper switch, light sensor, temperature sensor
26
Wireless Smoke Detector
RA02A
RA02A is a smoke detection alarm. RA02A has built-in photoelectric
smoke detector and buzzer, which can detect the smoke
concentration in the environment. When the smoke density exceeds
the preset value, it will generate a high sound pressure level alarm
sound. At the same time, the alarm data can be transmitted to the
wireless network.
The device is a LoRaWAN™ device compatible with LoRaWAN™
protocol (Class A).
Main Feature
• Compatible with the LoRaWAN standard protocol.
• Powered by 2 AAA alkaline batteries.
• Smart city and intelligent building
• Warehouse management
• Forest fire prevention
• Fire protection by train, high-speed rail, airplane, etc.
Technical Parameter
Input power 2 x1.5V AAA alkaline batteries

3 years (25°C, 60 min , txpower=20dBm,
LoRa SF=10)
Standby current 12uA @3VDC
Working current while alarming
580mA/3VDC
Alarming dBm 85dBm @3m

Alarming concentration 0.65
Product Size: D106mm , H36mm
Operating temperature: -20 C ～ 55 C
Environment humidity: <90%RH (no condensation)
Storage temperature: -40 C ～ 85 C

27
Wireless CO Detector
RA02C
RA02C is a wireless control alarm device for smart home and
high reliability. It adopts wireless communication method
conforming to the LoRaWAN protocol standard.
RA02C is a device for the detection of harmful gases in the

home environment. It is suitable for the detection of CO (carbon
monoxide). When the concentration exceeds the preset value, it
will trigger the alarm and fully comply with the LoRaWAN
protocol standard.
Main Feature
•Carbon monoxide alarm products for families, apartments,
schools, hotels, etc.
Technical Parameter
Power Input 2*AAA alkaline battery

Standby Current 18uA/3VDC
Average Operating Current 70uA/3VDC
Current While alarming 20mA/3VDC
Alarm Sound Intensity 85dBm at 3m
CO Detection Concentration Range 0 ~ 1000ppm
Product Size: D106mm , H36mm
Operating temperature: -20 C ～ 55 C
Environment humidity: <90%RH (no condensation)
Storage temperature: -40 C ～ 85 C

28
Wireless Emergency Push Button
RB02I
RB02I sends an alert to the gateway when the button is

pushed. With a silicone cover, it is waterproof and
widely used for smart home and building applications
with high reliability. It features low standby power
consumption, and the communication is fully
compliant with the LoRaWAN™ protocol (Class A).
Main Feature
• Silicone waterproof case
• Customer service request button
• Hotel/Motel Front Desk Call Button
• Access call button
Technical Parameters
Power supply 2 x 1.5V AAA batteries

operating voltage 2.1V-3V
Standby current 14uA
Transmitting current (max) 120mA/3.0V
Receiving current (max) 11mA/3.0V
Dimension 82mm*82mm*15mm
Working Temp -20°C ～ +55°C
Storage Temp -40°C ～ +85°C
Humidity Detecting Range ＜90%RH
29
Wireless Siren
R602A
R602A is an intelligent wireless alarm that can
communicate with other devices through
wireless network. It has high-power speakers
and high-brightness LEDs for sound and light
alarms. It uses SX1276 wireless communication
module. R602A type does not carry GSM
communication function.
Main Feature
•With high-power speakers and high-brightness LEDs, it
can be used as an audible and visual alarm indicator
• Fire alarm
• Anti-theft
• Access call
Technical Parameter
Input Power DC +12V
Working Current (max) 250mA(DC 12V)

Standby Current (max) 30mA(DC 12V)
Alarm sound level
>=80dB
(at three meters)
TX Power 19dBm±1dBm
Rx Sensitivity -136dBm
(LoRa，Spreading Factor=12，Bit Rate=293bps )
-121dBm
(FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Available Frequency EU863-870, US902-928, AU915-928
KR920-923, AS923, CN470-510
Configured before shipment
Dimension Φ85mm * 52mm

Environment Temperature -20℃ ～ 55℃
30
Wireless Vibration Sensor, Rolling Ball Type
R718DA
R718DA is equipped with an external rolling ball type vibration
sensor. When the vibration sensor moves or vibrates, R718DA can
detect vibration or moving signals and send an alert to data center
through LoRaWAN™. It is fully compatible with LoRaWAN™
protocol (Class A).
Main Feature
•2 ER14505 battery AA SIZE (3.6V / section) parallel power
supply
•The base is attached with a magnet that can be attached to a
ferrous object
Electric •To detect vibration or moving equipment; burglar alarm.

Input Power
5 years (Conditions: ambient temperature 25 °C, 15 min
Battery Life
heartbeats, txpower = 20dBm, LoRa spreading factor SF = 10)
Sleeping Mode 20uA
±0.1V
Accuracy
Vibration Sensor
Vibration Sensor Case Size L:43mm*W:13mm*H:12mm
Vibration Sensor Maximum
5V
Voltage
Sensor Switch Life Up to 100,000 times
Vibration Sensor Sensitivity When placed horizontally, any shaking can trigger the device.
When the pilot electrical end (without foot end) is placed
downward, it is not easily to be triggered.
Vibration Sensor When the vibration sensor is tilted and the tilting angle is greater
Characteristic than 10 degrees, it will be OFF mode. When the tilt level
( Dual ball type single changes, and the triggering end is lower than tilt angle 10
direction tilt sensitive trigger degrees, it will be ON state. The module can detect open circuit
sensor) OFF state and closed circuit ON state signal to detect vibration
or move.
External Cable Length 1 meter 31
Wireless 2-Gang Vibration Sensor, Rolling Ball Type
R718DA2
When the vibration sensor moves or vibrates, the R718DA2 can detect
vibrations or moving signals and transmit the detected data to other
devices through the wireless network. The SX1276 wireless
communication module is used.
Main Feature
supply
ferrous object
•2-way vibration sensor
Electric Application scenario
•To detect vibration or moving equipment; burglar alarm.
Input Power
Sleeping Mode 26uA
±0.1V
Accuracy
Vibration Sensor
5V
Voltage
Vibration Sensor Sensitivity When placed horizontally, any shaking can trigger the device.
When the pilot electrical end (without foot end) is placed
downward, it is not easily to be triggered.
Vibration Sensor Characteristic When the vibration sensor is tilted and the tilting angle is greater
( Dual ball type single direction than 10 degrees, it will be OFF mode. When the tilt level
tilt sensitive trigger sensor) changes, and the triggering end is lower than tilt angle 10
degrees, it will be ON state. The module can detect open circuit
OFF state and closed circuit ON state signal to detect vibration
or move.
External Cable Length 1 meter 32
Wireless Vibration Sensor, Spring Type
R718DB
R718DB is equipped with an external spring type vibration
sensor.. When the vibration sensor moves or vibrates, R718DB
can detect vibration or moving signals and send an alert to data
center through LoRaWAN™.
It is fully compatible with LoRaWAN™ protocol (Class A).
Main Feature
supply
ferrous object
Technical Parameter

Input Power
Sleeping Mode 23uA
±0.1V
Accuracy

5V
Voltage
Vibration Sensor Working When it is at rest, it is in the open state OFF state. When the
Principle external force is touched to reach the corresponding vibration
force, or when the moving speed reaches the appropriate
centrifugal force, the conductive pin will instantly reach the ON
state. When the external force disappears, the switch returns to
the OFF state.
33
Wireless 2-Gang Vibration Sensor, Spring Type
R718DB2
R718DB2 is equipped with an external spring type vibration
sensor.. When the vibration sensor moves or vibrates, R718DB2
can detect vibration or moving signals and send an alert to data
center through LoRaWAN™.
It is fully compatible with LoRaWAN™ protocol (Class A).
Main Feature
supply
ferrous object
•2-way vibration sensor
Technical Parameter

Input Power
Sleeping Mode 23uA
±0.1V
Accuracy

5V
Voltage
Vibration Sensor Working When it is at rest, it is in the open state OFF state. When the
Principle external force is touched to reach the corresponding vibration
force, or when the moving speed reaches the appropriate
centrifugal force, the conductive pin will instantly reach the ON
state. When the external force disappears, the switch returns to
the OFF state.
34
Wireless Push Button Interface
R718T
The device is connected to an external push button device (2 lines
are connected to the 2 end of the push button) that can detect the
signal when the button is pushed.
It uses SX1276 wireless communication module, and the

communication is fully compatible with LoRaWAN™ protocol
(Class A).
Main Feature
• 2 sections ER14505 battery AA SIZE (3.6V / section) parallel
power supply
• Body protection rating IP65, sensor protection class IP65
• The base is attached with a magnet that can be attached to a
ferrous object
• Emergency call button
Technical Parameter

Input Power
Sleeping Mode 22 uA


Weight 141g
35
Wireless 2-Input Push Button Interface
R718T2
The device is connected to an external push button device (2
lines are connected to the 2 end of the push button) that can
detect the signal when the button is pushed.
It uses SX1276 wireless communication module, and the

communication is fully compatible with LoRaWAN™
protocol (Class A).
Main Feature
power supply
ferrous object
• External 2-way emergency switch button
• Emergency call button
Technical Parameter

Input Power
Sleeping Mode 24uA


Weight 150g
36
R311B
The R311B device has a built-in Wireless Light Sensor that
can be used for ambient light intensity detection.
The R311B uses a photosensor. The output current of the
photosensor changes in the same direction as the ambient
light intensity changes. By detecting the change in the
input level value, the corresponding illumination intensity
is detected.
It uses the SX1276 wireless communication module.
•Villa; hotel; office; apartment
Technical Parameter
2pcs 3.0V CR2450 button battery (Single CR2450

Input Power
battery capacity 620mah)
±0.1V
Accuracy
Detecting Illumination Range 1～3000LUX

Weight 45g

37
Wireless Dry Contact Sensor
R311CA
Netvox wireless dry contact sensors can be used to detect contact
between two wired contact points.
It can realize wireless alarm and other functions through built-in
wireless module, and is compatible with LoRaWAN protocol.
It can be easily networked with other related devices.

The R311CA is durable and ensures optimum use and is a low power
consumption device. Due to their small size, they can be installed
anywhere, they are wireless, so they take up very little space.
•Condition monitoring of doors and windows such as
home or business
Technical Parameter

External Wire Specification

Wire material UL2468 28AWG
Wire maximum temperature 80°C
Wire weight 5g
Maximum outer diameter of the
1mm
wire
Wire length 1000mm（±5mm）
Wire flame resistance rating VW-1
Physical
Weight 48.9 g
38
Wireless Window Sensor with Glass Break Detector
R311CB
The built-in reed switch and the externally connected reed
switch are in a series connection state; when the reed switch
state is to be detected, a high level state is detected when all the
reed switches are closed.
Similarly, when the reed switch is not fully closed, it detects a
low level state. When the glass is broken, the glass breakage
detection will change its resistance value, and there is a high and
low level change for its detection port.
•Condition monitoring of doors and windows such as home
or business
Technical Parameter

±0.1V
Accuracy
Reed Switch Sensor Specification

Sensor Case Size L:42mm*W:13mm*H:12mm
Sensor Characteristic Inside the magnetic rang, it is at on state (conducting).
When out of the magnetic range, it is at off state (non-
conducting). Sensing distance inside magnetic rang is 2cm.
Reed solderability Good solderability
External Cable Length 1 meter
Physical
Weight 45 g

Storage Temperature -40℃ ～ 85℃ 39
Wireless 2-Gang Door/Window Sensor
R311CC
The R311CC device is equipped with two external reed switches,
which can be used for door and window switch state detection.
It can be easily networked with other related devices. The
R311CC is durable and ensures optimum use and is a low power
consumption device. Due to their small size, they can be
installed anywhere. They are wireless so they take up very little
space.
• Condition monitoring of doors and windows such as home
or business

±0.1V
Accuracy
Reed Switch Sensor Specification

Sensor Case Size L:42mm*W:13mm*H:12mm
Sensor Characteristic Inside the magnetic rang, it is at on state (conducting).
When out of the magnetic range, it is at off state (non-
conducting). Sensing distance inside magnetic rang is 2cm.
Reed solderability Good solderability
External Cable Length 1 meter
Physical
Weight 48.9 g

40
Wireless Seat Sensor
R31WA
The NETVOX Wireless Seat Sensor R311WA is a device that
detects the presence of a seat and is compatible with the
LoRaWAN protocol. When any sensor detects someone in the
seat, the R311WA sends a message to the gateway. When sensors
detect that there is no one in the seat, it sends a message back to
the gateway.
• Theater seat detection
• Conference room seat detection
• Large classroom seating detection
• Performance venue detection

±0.1V
Accuracy
Seat Sensor Specification

Maximum working voltage 20V (DC)
Maximum operating current 50mA
Maximum output resistance 50Ω
Substrate pressure resistance 2KV (DC)
Durability At least 150,000 times
Pressure range Minimum value is 200-300g
External Wire Specification

Wire material UL1571 26AWG
Wire maximum temperature 80°C
Maximum outer diameter of

1mm
the wire
Wire length 1000mm（±5mm）
Wire flame resistance rating VW-1 41

Wireless Short-Range Occupancy Sensor
R718PQ
The R718Q is a wireless communication device that
detects toilet occupancy. The device has a built-in PIR
sensor (pyroelectric human body infrared sensor) to
detect whether someone has entered; the detected data is
transmitted to other devices through the wireless
network, and the SX1276 wireless communication
module is used.
• Occupancy detection
• other
Technical Parameter
Electric
2 ER14505 lithium batteries (3.6 V, 2400 mAh /section) in
Power supply
parallel
Battery life is 4.5 years ( condition: ambient temperature 25°C,
Battery life 15 min report once, txpower= 0 dBm, LoRa spreading factor
SF = 10 )
current About 34 uA
current 6.3mA @3.3V
3.2V
RF receiving current 11mA @3.3V
RF emission current 120mA @3 .3 V
PIR Sensor
Model AS312
Power supply +3VDC
Measuring distance 3.8M (from the main unit)
Physical Characteristics
Size L: 112 mm*W: 65 mm*H: 32 mm
Body weight About 150g
Ambient temperature
-20°C to 55°C
range
Ambient humidity range <90% RH (no condense) 42
Storage temperature range -40°C ~ 85°C

Wireless Flush Toilet /Washing Liquid Bottle/
Toilet Paper Detection Sensor
R718VA
R718VA is a device to detect the status of toilet water,
hand sanitizer level, presence or absence of tissue. This
device is connected with a non-contact capacitive sensor
can be mounted to the exterior of the container, without
direct contact with the object to be detected, which may
detect the current water level of positions mounted, or the
presence or absence of liquid soap or toilet paper.
 Flush toilet water level detection
 Hand sanitizer level detection
 Whether toilet paper presence or absence
 Other
Technical Parameter
Electric
2 ER14505 lithium batteries (3.6 V, 2400 mAh / section) in
Power supply
parallel
Battery life 3.5 years (condition: ambient temperature
Battery life 25°C, report once , txpower = 20 dBm ,
LoRa spreading factor SF = 10)
current About 30 uA
current 6.3mA @3.3V
3.2V
RF receiving current 11 mA @3.3V
RF emission current 120mA @3 .3 V
Non-contact Capacitive Sensor
odel XKC-Y25-V
Power supply +5 V
temperature -5~100°C
Working humidity 5%~100%
container (non-metal) ≤20mm (glass, plastic, non-absorbent ceramic, acrylic,
wall thickness rubber, etc. or composite materials thereof)
Material ABS
aterproof level IP67
* ensitivity The sensitivity of the non-contact capacitive sensor must be 43
adjusted in the field according to different liquids or objects
and the thickness of non-metallic containers.

Wireless Flush Toilet /Washing Liquid Bottle/
Toilet Paper/Non-metallic Pipe Detection Sensor
R718VB
R718VB can detect the toilet water level, hand sanitizer
level, presence or absence of toilet paper, it may also be
applied to non-metallic pipes (pipe diameter D≥11MM)
liquid level detector. This device is connected with a non-
contact capacitive sensor which can be mounted to the
exterior of the container, without direct contact with the
object to be detected, which may detect the current position
of liquid level, or the presence or absence of liquid soap,
toilet paper.
• Flush toilet water level detection
• Hand sanitizer level detection
• Toilet paper presence or absence
• Non-metallic pipe liquid level detection
• Other
Technical Parameter
Electric
2 ER14505 lithium batteries
Power supply
(3.6V, 2400 mAh / section) in parallel
Standby current About 30 uA
Wake-up current 6.3mA @3.3V
Low battery alarm 3.2V
RF receiving current 11 mA @3.3V
RF emission current 12 0mA @3 .3 V
Non-contact Capacitive Sensor

Model XKC-Y26-V
Power supply +5V
temperature -5~105 °C
Working humidity 5%~100%
Induction container (non-metal) ≤20mm (glass, plastic, non-absorbent ceramic, acrylic,
wall thickness rubber, etc. or composite materials thereof)
Applicable pipe diameter range ≥11mm
Material ABS
44
aterproof level IP65

Wireless Toilet Occupancy Sensor
R718PQA
The R718PQA is a wireless communication device that detects
toilet occupancy. The device is equipped with a reed switch sensor
for detecting the switch status of the door; a built-in PIR sensor
(pyroelectric human body infrared sensor) to detect whether
someone enters the toilet; two simultaneous tests to determine if the
toilet is present.
Through the wireless networ, the detected data is transmitted to
other devices for display, which uses the SX1276 wireless
communication module.
• Occupancy detection
• other
Technical Parameter
Electric
Input Power
(3.6V, 2400mah/section）
Battery life are 4.5 years
Life Time (condition: ambient temperature 25 ° C, report every 15 mins,
txpower = 20 dBm, LoRa spreading factor SF = 10)
Sleeping Mode 34uA
PIR Sensor
Power Supply +3VDC
Measurement Range 5M
45
Wireless Indoor Temperature Humidity Sensor
R711
Netvox R711, mainly used to measure the indoor

ambient temperature and humidity, collects the
data and sends it to the gateway through the
wireless network communication module. The
wireless communication is compatible with
R711 has been LoRaWAN™ certified.
Technical Parameter
Input power 2 x 1.5V AA batteries

Operating power DC 2.4V～3V
Standby current 12uA/3V
Transmitting current (max) 120mA/3V
Receiving current (max) 11mA/3V
Voltage Measurement ±0.1V
Dimension L:112mm*W:34mm*H:17mm
Weight 83.8g
Operating Humidity ＜90%RH
Operating Temperature -20°C - 55°C
Storage Temperature -40°C － 85°C
Temperature Measurement Range -20°C － 55°C
Temperature Measurement Accuracy ±0.5°C @25°C Max. +/-0.8°C@ -20°C~55°C
Humidity Measurement Range 10%RH － 90%RH
Humidity Measurement Accuracy ±4%RH @25°C
46
Wireless Outdoor Temperature Humidity Sensor
R712
R712 is a long-range wireless temperature and

humidity device based on the LoRaWAN™ open
protocol (Class A). R712 carries a splash-proof
housing, and it is mainly used to measure the
outdoor ambient temperature and humidity. It
collects data and sends it to the gateway through
LoRaWAN™.
Technical Parameter
Input power 2 x 1.5V AA batteries

operating voltage DC 2.4V～3V
Standby current 12uA/3V
Receiving current (max) 11mA/3.6V
Dimension L:222mm*W:130mm*H:195mm
Working Temp -20°C - 55°C
Storage Temp -40°C － 85°C
Working Humidity <90% RH (no condensation)
Temperature Detecting Range -20°C - 55°C
Temperature Accuracy ±1℃ @25℃
Humidity Detecting Range 10%RH～90%RH　
Humidity Accuracy ±4.5%RH @25℃
47
Wireless Temperature and Humidity Sensor for
Low Temperature Environment
R718A
R718A is mainly used to measure the temperature and
humidity in low temperature environment such as a
freezer. It collects data and sends it to the gateway
through LoRaWAN™. It is fully compatible with
Main Feature
supply
•Air temperature and humidity detection
•The base is attached with a magnet that can be attached to
a ferrous object
•Battery life is 5 years (condition: ambient temperature 25 °
C, 15 min report once, txpower = 20 dBm, LoRa spreading
factor SF = 10)
Technical Parameter

Input Power
(3.6V 2400mAh/pc)
Sleeping Mode 20uA
Transmitting current (max) 120mA@3.3V
Receiving current (max) 11mA @3.3V
Dimension Main Body: L: 112mm*W: 65mm*H: 28.8mm

Sensor cover size: D: 16mm*L: 34.5mm,
Weight 141g
Environment Temperature
-40℃ ～ 55℃
Range
Environment Humidity Range < 90% RH (No condensation)
Temperature Measurement
-40℃～55℃ (+-0.8%)
Range
Humidity Measurement Range 0%RH～80%RH (+-3%)
Build-in Temp. & Humi. Sensor SHT-35
48
Wireless Temperature and Humidity Sensor
R718AB
R718AB is mainly used to measure the ambient
temperature and humidity. Fully compatible with
LoRaWAN™ protocol (Class A), it collects data and
sends it to the gateway through LoRaWAN™.
Main Feature
supply
•Air temperature and humidity detection
•The base is attached with a magnet that can be attached to
a ferrous object
Technical Parameter

Input Power
(3.6V 2400mAh/pc)
Sleeping Mode 24uA
Dimension Main Body: L: 112mm*W: 65mm*H: 28.8mm

Sensor cover size: D: 16mm*L: 34.5mm,
Weight 141g
-20°C－55°C
Range
-20°C－55°C
Range
Humidity Measurement Range 10%RH-90%RH　
Build-in Temp. & Humi. Sensor SHT-30
49
Wireless Temperature Sensor
R718AD
The R718AD is a wireless communication device for

detecting temperature. The temperature sensor probe
contacts an object to detect the temperature, and the
detected data is transmitted to other devices through a
wireless network. The SX1276 wireless communication
module is used.
Technical Parameter
Electric
Input Power
5 years
Battery Life (Conditions: ambient temperature 25 °C, 15 min heartbeats,
txpower = 20dBm, LoRa spreading factor SF = 10)
Sleeping Mode 24uA

Battery Measurement Accuracy ±0.1V
Temperature Sensor DS18B20

Power Supply +3V～+5.5V
Temperature Accuracy <±1℃（-40℃ to +125℃）
Cable Length 1 meter
Physical
Dimension Main Body: L:112mm*W:88.19mm*H:32mm
-20℃ ～ 55℃
Range
Storage Temperature -40℃ ～ 85℃ 50
Wireless Resistance Temperature Detector
R718B
This equipment is used to detect the temperature

of medium and objects . It carries a PT100
platinum thermal resistors. It uses SX1276
wireless communication module.
Technical Parameter
Electric
Input Power
Sleeping Mode 21uA
±0.1V
Accuracy
PT100 Platinum Thermal Resistance

Temperature Range -50-200°C
Lead Length 1m (default) 2m, 5m, 10m, others
Probe Specification 4mm in diameter and 30mm in length
Standard IEC751-1995/JIS
Physical
Weight 141g
51
Wireless 2-Gang Resistance Temperature Detector
R718B2
This equipment is used to detect the temperature

of medium and objects . It carries two PT100
platinum thermal resistors at the same time. It uses
Technical Parameter
Electric
Input Power
Sleeping Mode 23uA
±0.1V
Accuracy
PT100 Platinum Thermal Resistance

Temperature Range -50-200°C
Lead Length 1m (default) 2m, 5m, 10m, others
Probe Specification 4mm in diameter and 30mm in length
Standard IEC751-1995/JIS
Physical
Weight 141g
52
Wireless Thermocouple Sensor - Type K
R718CK
This equipment is used to detect temperature of the object and
medium which thermocouple is contacted. It can be connected
to two thermocouples for sampling. It uses SX1276 wireless
R718CX can be connected according to requirements: type T

thermocouple (R718CT), type K thermocouple (R718CK).
Technical Parameter

Input Power
5 years
Sleeping Mode 34uA
Thermocouple characteristics
Measurement accuracy Measurement error which the wire causes : ≦ 2℃
The basic error limit of the thermocoupl:

Type K thermocouple: -40~375℃ +-1.5℃
Thermocouple Wire Length 1 meter
53
Wireless Thermocouple Sensor - Type N
R718CN
R718CX can be connected according to requirements:Type T

(R718CT), Type K Thermocouple (R718CK), Type N
Thermocouple (R718CN), Type R Thermocouple (R718CR)
Technical Parameter

Input Power
5 years
Sleeping Mode 34uA

The basic error limit of the thermocouple:
Type N thermocouple: -40~375°C±1.5°C;
375~800°C±0.4% t (t is temperature).
54
Wireless Thermocouple Sensor - Type R
R718CR

Technical Parameter

Input Power
5 years
Sleeping Mode 34uA

Type R thermocouple: 0~1100℃±1℃。
55
Wireless Thermocouple Sensor - Type T
R718CT

Technical Parameter

Input Power
5 years
Sleeping Mode 34uA

Type T thermocouple: -40~125℃ +-0.5℃
56
Wireless 2-Gang Thermocouple Sensor - Type K
R718CK2

medium which thermocouple is contacted. It can be connected to
two thermocouples for testing. It uses SX1276 wireless
R718CX2 can be connected according to requirements: Type T

(R718CT2), Type K Thermocouple (R718CK2), Type N
Thermocouple (R718CN2), Type R Thermocouple (R718CR2)
Technical Parameter

Input Power
5 years
Sleeping Mode 36uA

Type K thermocouple: -40~375℃ +-1.5℃
57
Wireless Thermocouple Sensor - Type N
R718CN2
R718CX2 can be connected according to requirements: Type

T (R718CT2), Type K Thermocouple (R718CK2), Type N
Technical Parameter

Input Power
5 years
Sleeping Mode 36uA

Type N thermocouple: -40~375°C±1.5°C;
375~800°C±0.4% t (t is temperature).
58
Wireless Thermocouple Sensor - Type R
R718CR2

Technical Parameter

Input Power
5 years
Sleeping Mode 36uA

Type R thermocouple: 0~1100℃±1℃。
59
Wireless Thermocouple Sensor - Type T
R718CT2

Technical Parameter

Input Power
5 years
Sleeping Mode 36uA

Type T thermocouple: -40~125℃ +-0.5℃
60
R718G
The device has a built-in light sensor that can
be used for ambient light intensity detection.
It uses the SX1276 wireless communication
module. The R718G detects the ambient light
intensity value and adds it to the gateway. The
collected data is displayed in other devices.
• Illuminance detection
• other
Technical Parameter

Input Power
Sleeping Mode 18uA
±0.1V
Accuracy
Light Sensor
Supply Voltage Range 2.3VDC-3.3VDC
Light Sensor Model TSL45315
Illuminance Range 3LUX~220KLUX
Communication Method I2C communication
61
Wireless CO Sensor
R718PA1
The R718PA1 can detect the concentration of CO
in the air. The body and the sensor are connected
via the RS485 interface, and the detected data is
network. The wireless communication method
conforms to the LoRaTM protocol standard
Main Feature
• DC 12V power supply
• Protection class IP65
• The base is attached with a magnet that can be
attached to a ferrous object
• RS485 communication
• CO concentration detection
Technical Parameter
Power supply: DC 12V adapter power supply

Working current 1: 40mA (when there is no RF signal)
Working current 2: 80mA (when there is RF signal transmission)
CO sensor parameters
Power supply: +12VDC
CO measurement range: 0-1000ppm
CO measurement method: Electrochemical sensors
CO measurement accuracy: <± reading 3% (@25°C)
CO measurement resolution: 0.5ppm
Response time: ≤50s
Life time: In the air >5 years
Working pressure range Standard atmospheric pressure ±10%
62 www.netvox.com.cn TEL:86-592-5717178
Wireless NO Sensor
R718PA2
The R718PA2 can detect the concentration of NO in
the air. The body and the NO sensor are connected via
the RS485 interface, and the detected data is
conforms to the LoRaTM protocol standard.
Main Feature
• NO concentration detection
Technical Parameter

Working current: 50mA (external sensor)
NO sensor parameters
Power supply: +9V-+24V DC
NO measurement range: 0-1000ppm
NO measurement method: Electrochemical sensors
NO measurement accuracy: <± reading 2% (@25°C)
NO measurement resolution: < 1ppm
Life time: In the air 25 years
Weight 160g
Wireless O3 Sensor
R718PA3
The R718PA3 can detect the concentration of O3 in the
air. The body and the O3 sensor are connected via the
RS485 interface, and the detected data is transmitted to
other devices through the wireless network. The
wireless communication method conforms to the
LoRaTM protocol standard.
Main Feature
• O3 concentration detection
Technical Parameter

O3 sensor parameters
O3 measurement range: 0-20ppm
O3 measurement method: Electrochemical sensors
O3 measurement accuracy: <± reading 3% (@25°C)
Detectin Limit ＜20ppb
Response time: ≤ 15s
Life time: In the air 1 year
Weight 160g
-20℃ ～ 55℃
Range
Environment Humidity
<90% RH (No condensation)
Range
Wireless H2S Sensor
R718PA4
The R718PA4 can detect the concentration of H2S
in the air. The body and the H2S sensor are
connected via the RS485 interface, and the
detected data is transmitted to other devices
through the wireless network. The wireless
communication method conforms to the LoRaTM
protocol standard.
Main Feature
• H2S concentration detection
Technical Parameter

H2S sensor parameters
H2S measurement range: 0-100ppm
H2S measurement method: Electrochemical sensors
H2S measurement accuracy: <± reading 2%
H2S measurement resolution: ＜0.1ppm
Life time: In the air 2 years
Weight 160g
Wireless NO2 Sensor
R718PA5
The R718PA5 can detect the concentration of
NO2 in the air. The body and the NO2 sensor are
connected via the RS485 interface, and the
detected data is transmitted to other devices
through the wireless network. The wireless
communication method conforms to the LoRaTM
protocol standard.
Main Feature
• NO2 concentration detection
Technical Parameter

Working current: < 70mA (external sensor)
H2S sensor parameters
H2S measurement range: 0-20ppm
H2S measurement method: Electrochemical sensors
H2S measurement accuracy: <± reading 3% （@25℃）
Weight 160g
Wireless SO2 Sensor
R718PA6
The R718PA6 can detect the concentration of SO2 in
the air. The body and the SO2 sensor are connected
via the RS485 interface, and the detected data is
Main Feature
• SO2 concentration detection
Technical Parameter

SO2 sensor parameters
SO2 measurement range: 0-20ppm
SO2 measurement method: Electrochemical sensors
SO2 measurement accuracy: <± reading 3% （@25℃）
Weight 160g
Wireless Noise Sensor
R718PA7
The R718PA7 can detect the noise in the air. The
body and the noise sensor are connected via the
RS485 interface, and the detected data is
Main Feature
• Noise detection
Technical Parameter

Noise sensor parameters
Noise sensor measurement
30dB-130dB
range:
Resolution: 0.1dB
Measurement error: 3% FS
Frequency weighting
A weighting
characteristics:
Frequency response: 35Hz-20Khz
Weight 160g
Wireless PH Sensor
R718PA8
R718PA8 can detect the PH value of the solution. The
body and PH sensor are connected via RS485 interface,
and the detected data is transmitted to other devices
through the wireless network. It adopts the wireless
communication method conforming to the LoRaTM
protocol standard.
Main Feature
• PH detection
Technical Parameter

PH sensor parameters
PH sensor measurement range: 0-14PH
Resolution: 0.01PH
Accuracy: 0.01PH
Calibration method: 2-point calibration
Probe cable length: 5M, other lengths can be customized
Wetted material: PPR
Weight 160g
Wireless ORP Sensor
R718PA9
The R718PA9 can detect the ORP value of the solution.
The body and the ORP sensor are connected through the
other devices through the wireless network for display. The
wireless communication method conforms to the LoRaTM
protocol standard.
Main Feature
• ORP detection
Technical Parameter

ORP sensor parameters
ORP sensor measurement
-1500~+1500mV
range:
Resolution: 1mV
Accuracy: ±6mV
Calibration method: 1-point calibration
Wetted material: PPR
Weight 160g
Wireless Turbidity Sensor
R718PA10
R718PA10 can detect the turbidity value of the solution.
The body and turbidity sensor are connected through the
other devices through the wireless network for display. It
adopts the wireless communication method conforming to
the LoRaTM protocol standard.
Main Feature
• Turbidity detection
Technical Parameter

Turbidity sensor parameters
Power supply: DC12V±5%
Turbidity sensor measurement
0.1～1000NTU
range:
Resolution: 0.1NTU
Accuracy: ＜5% or 0.3NTU
Deepest depth: 10M underwater
Shell material: POW
Weight 160g
Wireless
Wireless Liquid
Liquid Level
Level Sensor
Sensor
R718PA11
The R718PA11 detects the depth of the liquid in the
container. The body and the sensor are connected via the
other devices through the wireless network. The wireless
communication method conforms to the LoRaTM protocol
standard.
Main Feature
• Lequid level detection
Technical Parameter

Lequid level sensor parameters
Lequid level sensor
3m, 5m, 10m, etc. (requires selection confirmation)
measurement range:
Accuracy: 0.25% FS (typical)
Weight 160g
-20℃ ～ 55℃
Range
Range
Wireless Seawater Sensor
R718PA12
R718PA12 can detect seawater salt, dissolved oxygen
saturation and water temperature. The body and sensor are
connected through RS485 interface, and the detected data is
transmitted to other devices through wireless network. It
adopts wireless communication method conforming to
LoRaTM protocol standard.
Main Feature
• Seawater salinity
• Seawater dissolved oxygen saturation, water
temperature
Technical Parameter

Working current: < 100 mA (external sensor)
Seawater sensor parameters
Power supply: 12VDC
Dissolved oxygen
0-20mg/L
\measurement range:
Water temperature
0-50℃
measurement range:
Weight 160g
-20℃ ～ 55℃
Range
Range
Wireless Bottom-installed Ultrasonic Liquid Level Sensor
R718PA22
The R718PA22 is a wireless communication device that measures the
liquid level with an ultrasonic liquid level sensor. Ultrasonic liquid
level sensor installed at the bottom of the container, it may measure
water, gasoline, diesel and small, medium, large capacity storage tanks
(metal, plastic, glass material). R718PA22 main unit and the ultrasonic
liquid level sensor communicate via RS485 interface, and the detected
data is sent to the other equipment shown which employs compliance
LoraWANTM wireless communication protocol standards.
Technical Parameter
Electric
Power supply DC 12V
Working current <50mA (external sensor)
Ultrasonic Liquid Level Sensor Specifications

Power supply 9-36V Power Supply
Working current Less than 50mA
Measuring range 0.12-3m ( 0-0.12m is a blind spot )
Beam angle 8°
easurement accuracy 1%
Temperature accuracy +-2-3°C - 40~ 125°C ( NTC thermistor )
Housing material PVDF/ABS
Size and weight Diameter 39*32mm, 40g
*Installation method Bottom mounting (AB glue)
Physical
Size L: 112 mm*W: 88.19 mm*H: 32 mm
Ambient temperature range -20°C to 55°C
Body weight About 200g
Ambient humidity range <90% RH (no condense)
Storage temperature range -40°C ~ 80°C
74
Wireless Soil Moisture Sensor
R718PB13
The device is a wireless communication device that
detects the moisture content of the soil. It can detect the
moisture content of the soil and transmit the detected
data to other devices through the wireless network. It
uses the SX1276 wireless communication method.
Main Feature
• Soil moisture content detection
• other
Technical Parameter
2 ER14505 lithium batteries (3.6V, 2400mAh /
Power supply:
section) in parallel
Stand by current: 38uA
Wake up current: 6.3mA@3.3V
RF receiving current: 11mA @3.3V
RF emission current: 120mA @3.3V
Battery measurement
±0.1V
accuracy:
Low battery voltage: 3.2V
EC-5 sensor parameters

Rated power supply: 2.5VCD
Water content detection
±3％VWC
accuracy:
0.1% VWC in mineral soil, 0.25% VWC in
Moisture content resolution:
growth medium
Water content detection
0-100%VWC
range:
Size 89*18*1.8mm
Weight 131g
Line length 5m
Wireless Soil Moisture/Temperature/Electrical Conductivity
Sensor
R718PB14
The device is a wireless communication device that detects soil
temperature and moisture content and soil conductivity, and
transmits the detected data to other devices through a wireless
network. It uses the SX1276 wireless communication method.
Main Feature
• Soil temperature detection
• Soil conductivity
• other
Technical Parameter

Power supply:
Battery measurement
±0.1V
accuracy:
5TE sensor parameters

Rated power supply: 3.6VDC-15VDC
Soil temperature
+/-1°C @25°C
measurement accuracy:
Moisture content resolution: 0.08%vwc (0-50%vwc)
Soil moisture content
±3%vwc（typical）
accuracy:
Size 108*1840*1.8mm
Weight 110g
Line length 3m
Wireless Soil Temperature and Humidity, Conductivity Sensor
R718PB15
Main Feature
• other

Power supply:

Battery measurement accuracy: ±0.1V
Conductivity /Soil temperature / Moisture three-in-one sensor parameters

Rated power supply: 5VDC-30VDC
Soil temperature resolution: 0.1℃
Soil temperature measurement
±0.5℃
accuracy:
Soil temperature range: -40~+80℃
Soil moisture content resolution: 0-50%: 0.03%，50-100%: 1%
Soil water measurement range: 0-100%
0-10000us/cm: 10us/cm ；
Conductivity resolution:
100000-20000us/cm :50us/cm
Wireless Soil Moisture/Temperature/Electrical Conductivity
Sensor
R718PB15A
Main Feature
• Golf course lawn moisture detection

Power supply:

Conductivity /Soil temperature / Moisture three-in-one sensor parameters

Rated power supply: 5VDC-30VDC
Soil temperature resolution: 0.1℃
Soil temperature measurement
±0.5℃
accuracy:
Soil temperature range: -40~+80℃
Soil moisture content resolution: 0-50%: 0.03%，50-100%: 1%
Soil water measurement range: 0-100%
0-10000us/cm: 10us/cm ；
Conductivity resolution:
100000-20000us/cm :50us/cm
Wireless Water Leak Detector
R718WA
The device is a LoRaWAN™ device compatible with
LoRaWAN™ protocol (Class A). When the sensor detects the
leak, it will send an alarm message to the gateway.
R718WA carries 1 water leak sensor.

It uses SX1276 wireless communication module.
Application Scenario
• Computer room; warehouse; family; archives;
semiconductor factory; data center
Technical Parameter

Input Power
Sleeping Mode 22 uA


Weight 141g
79
Wireless 2-Gang Water Leak Detector
R718WA2
The device is a LoRaWAN™ device compatible with
LoRaWAN™ protocol (Class A). When the sensor detects the
leak, it will send an alarm message to the gateway.
R718WA2 carries 2 water leak sensors.

Technical Parameter

Input Power
Sleeping Mode 23uA


Weight 150g
80
Wireless Water Leak Detector with Rope Sensor
R718WB
The device is a LoRaWAN™ device compatible
with LoRaWAN™ protocol (Class A). When the
sensor detects the leak, it will send an alarm
message to the gateway.
R718WB carries 1-gang water rope sensor.
Technical Parameter

Input Power
Sleeping Mode 22 uA


Weight 141g
81
Wireless Two-Gang Water Leak Detector with Rope
Sensor
R718WB2
The device is a LoRaWAN™ device compatible
with LoRaWAN™ protocol (Class A). When the
sensor detects the leak, it will send an alarm
message to the gateway.
R718WB2 carries 2 water rope sensors.
Technical Parameter

Input Power
Sleeping Mode 22uA


Weight 150g
82
Wireless Temperature and Humidity Sensor &
Water Leakage Sensor
R718WBA
The R718WBA detects the temperature and humidity of
the air. At the same time, it detects the presence or
absence of water leakage through the 2-core non-locating
leak detection sensor line, and transmits the detected data
to the gateway through the wireless network.
Technical Parameter

Input Power
(3.6V, 2400mah/section）
5 years (Conditions: ambient temperature 25 °C, 15 min
Battery Life
heartbeats, txpower = 20dBm, LoRa spreading factor SF = 10)
Sleeping Mode 25uA
Non-positioning Leakage Rope Sensor

Material Conductive Polyethylene + Alloy Wire
Working Temperature (Max.) 75°C
Diameter 5.5mm
Length 3000mm (±5mm)
Fire Rating Grade Level 2 Pressure Vent Cable
Quality 18g/m
Color Orange
Breaking Strength 60 kg
Detect Core Resistance Less than 5 ohms/100 meters
Recommended Max. Length 300 meters (Theoretical value)
83
Wireless Outdoor Liquid Level Sensor with Solar Panel
R72611
The R72611 detects the depth of the liquid in the container. The body and
the sensor are connected via an RS485 interface, and the detected data is
transmitted to other devices via a wireless network. The wireless
communication method conforms to the LoRaTM protocol.
• Level deepth detection / other
Technical Parameter
3 rechargeable lithium batteries in series

Power supply: (single-section rechargeable lithium battery 3.7V,
capacity recommended 5000mah)
Operating voltage range: 9VDC to 12.6VDC
Working current 1: 15mA (standby mode)
Working current 2: 30mA (when the sensor is working)
Lequid level sensor parameters
Lequid level sensor
3m, 5m, 10m, etc. (requires selection confirmation)
measurement range:
Accuracy: 0.25% FS (typical)
Size: Mask part: D220mm*H280mm,

Solar panel size: 290mm*150mm*25mm,
Main body size: 117mm x 89mm x 41mm
Mask life time: The mask material is ABS material, can be used
outdoors for 3 years
Working temperature : -20 ° C ~ 55 ° C
Operating humidity range: <90% RH (no condensation)
Storage temperature range: -40°C to 85°C
84
Wireless Outdoor CO2/Temperature/Humidity Sensor
with Solar Panel
R72615
The R72615 is equipped with a temperature and humidity
sensor that detects and transmits ambient
temperature and humidity data. It is a wireless
communication method that uses the SX1276 wireless
communication module. The R72615 has a CO2 sensor that
detects the concentration of CO2 in the air.
•Application Scenario
•Smart Home / Outdoor Air Detection / Smart Farm
Technical Parameter
3 rechargeable lithium batteries in series (single-cell

Power Supply rechargeable lithium battery 3.7V, capacity recommended
5000mah)
Operating Voltage Range 9VDC ~ 12.6VDC
Operating Current 1 15mA (Standby mode)
Operating Current 2 30mA (When the sensor is working.)
CO2 Sensor Characteristic

Operating Voltage 4.5VDC-5.5VDC
Working Current <85mA
CO2 Accuracy +/-（100ppm+6% read value）
CO2 Range 0-5000ppm
Preheat Time 3min
Response Time T<90s
Output Signal UART
SHT-30 Temperature and Humidity Sensor

Operating Voltage +3.3VDC
Temperature Measurement Range -20°C－55°C
Temperature Measurement Accuracy +/-0.5°C@25°C Max.+/-0.8°C@ -20°C－55°C
Humidity Measurement Accuracy +/-4%RH @25°C
85
Wireless CO2/Temperature/Humidity Sensor
R72615A
R72615A has a temperature and humidity sensor that detects and
transmits ambient temperature and humidity data. It applies
wireless communication method that uses the SX1276 wireless
communication module. The R72615A has a CO2 sensor that
detects the concentration of CO2 in the air.
•Smart home
•Smart farm
•other
Electric
A total of 8 ER14505 lithium batteries, lithium battery power
Power Supply supply voltage 7.2v, total capacity of 9600mah. (Single-cell
lithium battery 3.6V 2400mAH).
The battery life is about 1 year (Condition: ambient
temperature 25 ° C. Report once every 720 minutes. Txpower
Battery Life Time
= 20 dBm. LoRa spreading factor SF = 10), which is subject to
actual measurement.
Working Voltage Range 6.4VDC～7.2VDC
Sleeping Current 300uA
Working Current 65mA（When the sensor is working.）
Module Wake-up Current 6.3mA@3.3V
RF Receiving Current (RX) 11mA @3.3V
RF Emission Current (TX) 120mA @3.3V
Battery Measurement
±0.1V
Accuracy
CO2 Sensor
Working Voltage 4.5VDC-5.5VDC
Accuracy +/-（100ppm+6%{Value}）
Range 0-5000ppm
Worm-up Time 3min
86
Wireless PM2.5/Temperature/Humidity Sensor
R72616
The R72616 is equipped with a temperature and humidity sensor
that detects and transmits ambient temperature and humidity data.
It is a wireless communication method that uses the SX1276
wireless communication module. The R72616 has a PM2.5 dust
sensor that can be used to obtain the concentration of suspended
particulates in air per unit volume.
•Smart home / atmospheric detection
PM2.5 Particle Concentration Sensor

Working Voltage 5VDC
Operating Current 100mA (typical)
Particle Measurement Range 0.3~1.0; 1.0~2.5um
Particle Count Efficiency 50%@0.3um, 98%@≥0.5um
Particle Mass Concentration
Effective Range (PM2.5 Standard 0~500 μg/m3
Value)
Particle mass concentration
1ug/m3
resolution
Particle mass concentration ±10%@100-500ug/m3
consistency ±10ug/m3@0-100ug/m3
Comprehensive response time ≤10s

+/-0.5°C@25°C Max.+/-0.8°C@ -20°C－55°C
Accuracy
87
R72616A
R72616A with temperature and humidity sensor can detect and send
the temperature and humidity data of the environment. The device is
in line with the LoRa protocol standard. R72616A with PM2.5 dust
sensor can be used to obtain the concentration of suspended
particulates in air per unit volume.
•Smart home
•Atmospheric detection
•Temperature and humidity detection
• other
Electric
Apply 8 sections of ER14505 lithium batteries, lithium battery
Power Supply Mode power supply voltage 7.2v, total capacity 9600mah, (single-
section lithium battery: 3.6V 2400mAH).
The battery life is about 1 year (condition: ambient
temperature 25 ° C, 150 min report once, txpower = 20 dBm,
Battery Life Time
LoRa spread factor SF = 10)); the actual measurement shall
prevail.
Operating Voltage Range 6.4VDC ~ 7.2VDC
Sleep Current 250uA
Working Current 60mA (when the sensor is working)
Module Wake-up Current 6.3mA@3.3V
RF Receiving Current (RX) 11mA @3.3V
RF Emission Current (TX) 120mA @3.3V

Working Voltage 5VDC
Operating Current 100mA (typical)
Particle Measurement Range 0.3~1.0; 1.0~2.5um
Particle Count Efficiency 50%@0.3um, 98%@≥0.5um
Particle Mass Concentration
Effective Range (PM2.5 0~500 μg/m3
Standard Value)
88
Wireless Outdoor PM2.5/Noise/Temperature/
Humidity Sensor with Solar Panel
R72623
NETVOX Wireless Sensor R72623 is capable to measure PM2.5 /
noise / temperature / humidity at outdoor environment.
R72623 can be used in construction site / agricultural
environment / airport surroundings / business environment data
collection. Suitable as a data logger.
•Main Feature
•Compatible with LoRaWAN standard protocol
•Detection of PM2.5 particulate matter concentration in the environment
•Detecting noise intensity values in the environment
•Detect air temperature and humidity values
•Built-in lithium battery pack power supply
•With solar panel charging function
Technical Parameter

Particle measurement range 0.3~1.0; 1.0~2.5um
Particle counting efficiency 50% @ 0.3um, 98% @ ≥ 0.5um
Particle mass concentration effective 0~500 μg/m3
range (PM2.5 standard value)
Particle mass concentration resolution 1ug/m3

Particle mass concentration ±10% @100-500ug/m3
consistency (PM2.5 standard value) ±10ug/m3@0-100ug/m3
Noise Sensor Specifications

Operating Voltage 10VDC
Power Consumption 0.4W（Max.）
Measuring Range 30dB-130dB
Measurement Error 3% F.S
Resolution 0.1dB
Frequency Weighting Characteristics A weighted
Frequency Response 35Hz-20kHz

Response Time ≤2 seconds
Output Interface RS485 output
89
Wireless Outdoor Noise/Temperature/Humidity
Sensor with Solar Panel
R72624
NETVOX Wireless Sensor R72624 is capable to measure noise /
temperature / humidity at outdoor environment.
R72624 can be used in construction site / agricultural
environment / airport surroundings / business environment
data collection. Suitable as a data logger.
•Main Feature
•Detecting noise intensity values in the environment
•Detect air temperature and humidity values
•Built-in lithium battery pack power supply
•With solar panel charging function
Technical Parameter
3 rechargeable lithium batteries in series (single-cell

Power Supply rechargeable lithium battery 3.7V, capacity recommended
5000mah)
Operating Voltage range 9VDC～12.6VDC
Operating Current 1 15mA (Standby mode）
Operating Current 2 30mA
Wireless idle mode Cycle 3 minutes

Resolution 0.1dB
Frequency Weighting
A weighted
Characteristics
90
Wireless Outdoor CO2/Temperature/Humidity
Sensor
RA0715Y
The RA0715Y has a temperature and humidity sensor that
detects and transmits ambient temperature and humidity data.
The RA0715Y has a CO2 sensor that detects the concentration of
CO2 in the air and transmits the detected data to other devices
via LoRa wireless network. It uses the SX1276 wireless
communication method.
• Outdoor environmental monitoring
• Smart city and smart home
• Smart agriculture
• Airport environment
• Site environmental monitoring
Electric
Power Supply Power adapter DC power supply, DC12V/1A
Operating Current 1 40mA (No radio frequency signal transmission)
Operating Current 2 80mA (With radio frequency signal transmission)
CO2 Sensor Characteristic

CO2 Accuracy +/- (100ppm + 6% reading)
CO2 Range 0-5000ppm
Warm-up Time 3mins
Response Time T<90s
Output Signal PWM UART

+/-0.5°C@25°C Max.+/-0.8°C@ -20°C－55°C
Accuracy
91
Wireless Outdoor PM2.5/Temperature/Humidity
Sensor
RA0716Y
　　　
　　　RA0716Y carrying temperature and humidity
sensors that can detect and send the environment
temperature and humidity data with wireless
communication, compatible with LoRa protocol standards.
RA0716Y carrying PM2.5 dust sensor which can obtain the
concentration of suspended particulate matter in the air
per unit volume.
Main Feature
• Compatible with LoraWAN standard protocol
• Temperature and humidity detection
• Air particle concentration detection (PM2.5)
• Outdoor environmental monitoring
• Smart city and smart home
• Smart agriculture
• Airport environment
• Site environmental monitoring
Technical Parameter
Power supply Adapter DC powered

Working voltage 40mA/12V(DC)
RX current 11mA @3.3V
TX current 120mA @3.3V
Particle measurement range 0.3~1.0
Particle mass concentration Effective
0~500 (μg/m3)
Temperature measurement range 0°C
Temperature measurement accuracy +-0.5°C @25°C
Humidity measurement range 10%RH---90%RH
Humidity measurement accuracy +/-4%RH @25°C
92
Wireless Outdoor PM2.5/Noise/Temperature&
Humidity Environment Sensor
RA0723Y
RA0723Y with temperature and humidity sensor, can detect and send
the temperature and humidity data of the environment, is a wireless
communication method, in line with the LoRa protocol standard. The
RA0723Y with PM2.5 dust sensor can be used to obtain the
concentration of suspended particulates in air per unit volume.
RA0723Y external noise sensor can detect the noise of the
atmospheric environment.
Main Feature
• Compatible with LoraWAN standard protocol
• Temperature and humidity detection
• Air particle concentration detection (PM2.5)
• Noise sensor (RS485 type)
• Outdoor environment testing
• Smart city and smart building
• Data center monitoring
• Intelligent agriculture
Particle measurement range 0.3~1.0; 1.0~2.5um
Particle counting efficiency 50% @ 0.3um, 98% @ ≥ 0.5um
Particle mass concentration effective 0~500 μg/m3
Particle mass concentration resolution 1ug/m3

Particle mass concentration ±10% @100-500ug/m3
consistency (PM2.5 standard value) ±10ug/m3@0-100ug/m3

Resolution 0.1dB
Frequency Weighting Characteristics A weighted

Wireless Water Leak Detection & Location Sensor
RA07W
RA07W is a water leak detection and location sensor.
Its external four-core positioning leak detection rope
sensor can detect the water leak location and transmit
the detected data to the gateway through the wireless
network. It is fully compatible with LoRaWAN™
protocol (Class A).
• Wheel warehouse
• Smart home
• Archives
Technical Parameters
Power supply Adapter DC powered（12V/1A）

Working power（max） 40mA(RX)，
80mA (TX)
Position Water Leak Detector 100M（max）
Leak detection error range 1% ± 0.5 meters of sensor cable length
Working Temp -20°C ～ 55°C
Humidity Detecting Range 5%RH～95%RH
Storage Temp -40°C ～ 85°C
94
Wireless CO Sensor
RA0701
RA0701 is a wireless communication device that
detects the carbon monoxide content in ambient air.
RA0701 can detect the concentration of CO in the
air. The body and the sensor are connected through
the RS485 interface, and the detected data is
transmitted to data center through the wireless
network for display.
　　　
• Railway station / airport traffic
• Metallurgical plant / chemical plant / thermal power plant
• Underground pipe or mine
• Warehouse
Technical Parameter
Power Supply Adapter (12VDC/1A)
Operating Current 1 80mA (no RF signal transmission)

Operating Current 2 120mA (with RF signal emission)
CO Sensor Power supply +12VDC
CO measurement range 0-1000ppm
CO measurement method Electrochemical sensor

CO measurement accuracy <± reading 3% (@25°C)
CO measurement resolution 0.5ppm

Response time ≤50s
Service life >5 years in the air
Working pressure range Standard atmospheric pressure ±10%
95
Wireless pH Sensor
RA0708
RA0708 is a device for pH detection in
water environment. It can detect and send
environmental pH data. to data center. It
is a wireless communication method. It
adopts SX1276 wireless communication
module
• Pig farm
• Metallurgical plant / chemical plant
• Intelligent agriculture
Electric
Power Supply Adapter DC Power Supply (12V/1A)
Operating Current 1 40mA (RX)
Operating Current 2 80mA (TX)
PH Sensor
Operating voltage 12VDC-24VCD±10%
Operating temperature range 0-65°C
Range 0-14PH
Accuracy ±0.01PH
Working pressure <0.2MPa
Temperature Compensation Automatic Temperature Compensation (NTC)
Signal output RS485
Wet material PPR
Mounting Method 3/4" NPT Thread, Immersion Mount
Cable length 5m, other lengths can be customized
Calibration method 2-point calibration

Power Consumption <0.5W
Protection class IP68

96
Wireless Turbidity Sensor
RA0710
The RA0710 is connected to the ZS-206 integrated online
turbidity sensor, and the ZS-206 is designed and manufactured
using the principle of scattered light turbidity measurement.
The LoRa module of the RA0710 communicates with the
turbidity sensor in the form of RS485 communication to obtain
the current turbidity signal value and display it through the
wireless gateway.
• Water quality turbidity test
• Smart washing machine
• Other
Electric
Power Supply Power Supply DC Power Supply, DC12V/1A
Operating current 1 50mA (RX)
Operating current 2 90mA (TX)
Turbidity Sensor
Model ZS-206
Measuring principle Scattered light method
Range 0-1000NTU
Resolution 0.1NTU, 0.1°C
Accuracy ±5% F.S., ±0.5°C
Correction Function Supported
Temperature Compensation Supported
Output Mode RS-485 bus, MODBUS-RTU protocol
Working Conditions 0-50 ° C, <0.2MPa
Storage Temperature -5°C - 65°C
Installation Method 3/4” NPT thread, immersion installation
Cable Length 5 meters, other lengths can be customized
Power Supply 12V-24VDC ±10%
Protection Level IP68
97
Wireless Liquid Level Sensor
RA0711
RA07 carries an RS485 communication interface,
and RA0711 comes with an external water level
sensor (RS485). The communication is fully
compatible with LoRaWAN™ protocol (Class A).
RA0711 is mainly used to measure water level.
• Monitor and track tank level
• Monitor and track container levels
• Detection of non-corrosive liquid levels
• Monitoring the pit water level
Technical Parameter
Power Supply Adapter (12VDC/1A)
Operating Current 1 80mA (RX)
Operating Current 2 120mA (TX)
Power supply 12VDC
Level sensor range 3m, 5m, 10m, etc. (requires confirmation of model
selection)
Level sensor accuracy class 0.25%FS (typical)
Dimension Main Body: 111mm*86mm*42mm

98
Wireless Soil Moisture Sensor
RA0713
RA0713 can be used to measure the amount of soil

water and transmit the data to the gateway through the
wireless network. It is fully compatible with
• Smart agriculture.
• Soil moisture testing.
Technical Parameter
Electric (EC-5 sensor parameters)

Power supply Adapter DC powered
Working power（max） 70mA(RX) 110mA(TX)
Sensor resolution 0.1% vwc in mineral soil 0.25% vwc in growth medium
Sensor accuracy +-3%

Sensor detect range 0-100%VWC
Physical
Humidity Detecting Range ＜90%RH
99
Wireless CO2/Temperature/Humidity Sensor
RA0715
Netvox RA0715 is designed to monitor temperature,
humidity and CO2 for Indoor Air Quality (IAQ)
applications based on LoRa® wireless connectivity.
The communication is fully compatible with

• Smart home / smart farm
Technical Parameter
Input power DC 12V /1A

Working Current 40mA (RX), 80mA (TX)
Sensor
Accuracy +/- (100ppm + 6% reading)
Range 0-5000ppm
Worm-up Time 3min
Response Time T<90s
Output PWM UART
T/H Sensor
Working Voltage +3.3VDC
Temperature Range -20°C
Temperature Accuracy +/-0.8°C
umidity Range 10%RH-90%RH
umidity Accuracy +/-4%RH @25°C
100
RA0716
Netvox RA0716 is mainly used to measure PM2.5,
ambient temperature and humidity in an indoor
environment, communicating over the LoRa®
network with standard LoRaWAN™ protocol (Class
A). RA0716 carries a PM2.5 sensor that can be used
to obtain the concentration of suspended particles
per unit volume in the air.
RA0716 has been LoRaWAN™ certified.
• Smart home / smart farm
Technical Parameter
Input power 12VDC/1A
Operating current 1 40mA (RX)

Operating current 2 80mA (TX)
Particle measurement range 0.3~1.0；1.0~2.5（um）
Particle counting efficiency 50%@0.3um，98%@≥0.5um
effective range (PM2.5 standard 0~500 ug/m3
value)
1ug/m3
resolution
Particle mass concentration ±10%@100-500ug/ m3
accuracy (PM2.5 standard value) ±10ug/ m3@0-100ug/ m3
Response time ≤10s
Temperature measurement range -20°C 55°C
Temperature measurement
±0.8°C @25°C
accuracy
Humidity measurement range 10%RH －90%RH　
Humidity measurement accuracy
±4%RH @25°C
101
Wireless Temperature and Humidity Sensor
R720A
The R720A is a wireless communication device that detects
ambient air temperature and humidity. The R720A detects the
temperature and humidity of the air and transmits the
detected data to other devices via a wireless network using the
• Environmental temperature and humidity testing for
homes, venues, etc.
• other
Technical Parameter

Input Power
(3.6V 2400mah/section）
5 years
Sleeping Mode 24uA

Thermistor SHT-35
Model SHT-35 （Brand：Sensirion）
Power Supply +3.3VDC
Temperature Detecting Range -40℃～55℃
Temperature Accuracy ±0.8℃ @25℃
Humidity Accuracy ±4%RH @25℃
102
Wireless Temperature and Humidity Sensor with
3-axis Accelerometer
R720B
The R720B is a wireless communication device that detects
ambient air temperature and humidity. The R720B also
detects if it is being moved. The R720B can transmit the
detected data to other devices via the wireless network, using
the SX1276 wireless communication module.
• Smart home
• Atmospheric detection

Input Power
3 years
Sleeping Mode 80uA
Thermistor SHT-35
Model SHT-35 （Brand：Sensirion）
Temperature Detecting Range -40℃～55℃
Temperature Accuracy ±0.8℃ @25℃
Humidity Accuracy ±3%RH @25℃
3-axis Accelerometer
Model ADXL345
Range ±2/4/8/16g (optional)
Resolution 10 bit or 4mg/lsb (full scale)
13 bit @±16g 103
Wireless Pressure Sensor
R720C
The R720C is a wireless communication device that detects
ambient air pressure and temperature. The R720C detects
ambient air pressure and temperature and transmits the
detected data to other devices via a wireless network using
• Environmental temperature and humidity testing for
homes, venues, etc.
• other
Technical Parameter

Input Power
5 years
Sleeping Mode 24uA

BMP280 Pressure Sensor

Model Name BMP280
Air Pressure Measurement
300-1100hPa
Range
Air Pressure Measurement
±1hPa (950 ... 1050 hPa, 0 ... +40 °C) TBD
Accuracy
-40°C～55°C
Range
±1 °C @25 °C TBD
Accuracy
104
Wireless IR Blaster
R211
The R211 is an indoor use for smart homes that
integrates a chip module that complies with the
LoRa TM wireless protocol.
R211 is a LoRa device capable of IR infrared
learning and IR application. After IR learning, it
can directly control the electrical equipment that
can receive IR control, and can receive the IR
signal from the infrared remote control to directly
control the LoRa device.
Main Feature
• C ompatible with LoRaWAN standard protocol

• Built-in serial communication FLASH memory
AT25SF041, 4M capacity
• Infrared receiving and transmitting functions
Technical Parameter
Working power: 12V DC adapter

Standby current: 50mA/12V/0.6W
Infrared signal learning
38KHz
frequency:
Infrared signal control
About 32 meters
distance:
Product Size: Diameter 106mm Height 30.6mm

Operating temperature: -20 ° C ~ 55 ° C
Storage temperature: -40°C～85°C
Working humidity: 5% RH ~ 95% RH (no condensation)

Wireless Activity Detection Sensor
R311FA
It can detect the sudden movement or vibration of the device

and send an alarm signal to the gateway for processing. It
uses the SX1276 wireless communication module.
• Smart home
• Anti-theft system
• Industrial equipment
• Security field
Technical Parameter


Weight 48.9g

106
Wireless Activity Event Counter
R311FB
The device detects the number of movements or vibrations
(such as detecting the motor a few times a day), the
maximum number of movements or vibrations can reach 232
times (theoretical value), and sends the information of
the number of movements or vibrations to the gateway for
processing. Apply SX1276 wireless communication module.
• Smart home
• other
Technical Parameter


Weight 48.9g

107
Wireless Activity Timer
R311FC
The device detects the duration of the movement or

vibration (timekeeping) and sends the duration or timing
information of the movement or vibration to the gateway for
processing. The duration of the movement or vibration can
be up to 1000 hours (theoretical value). Apply SX1276
• Smart home
• other
Technical Parameter


Weight 48.9g

108
Wireless Accelerometer and Surface Temperature Sensor
R718E
It can detect the movement or vibration of the
device, send a signal to the gateway for processing,
and externally connect one NTC thermistor to detect
the surface temperature of the measured object. It
uses the SX1276 wireless communication module.
• other

Input Power
Sleeping Mode 80uA
±0.1V
Accuracy
NTC Thermistor Sensor

NTC Temperature Range -40℃ -125℃
25 Degree Resistance Value 10k (typical)
B value B25/50 3990
Temperature Measurement The basic error limit of NTC thermistor: -40~125°C +-3°C;
Accuracy Measurement error caused by the wire : ≦ 2 ° C.
Physical
Dimension Main Part: L: 112mm*W: 88.19mm*H: 32mm
Weight 141g
109
Wireless 0-5V ADC Sampling Interface
R718IA
This device can be connected to an ADC sampling
interface device. As shown in the figure, black is the
ground line, red is the ADC sampling interface line,
and the ADC sampling voltage range is 0-5V. It uses
the SX1276 wireless communication module. The
• ADC sampling interface device (0-5V)
Technical Parameter

Input Power
Sleeping Mode 22 uA

±0.1V
Accuracy

Weight 141g
110
Wireless 2-Input 0-5V ADC Sampling Interface
R718IA2
Technical Parameter

Input Power
Sleeping Mode 26uA

±0.1V
Accuracy

Weight 150g
111
Wireless 0-10V ADC Sampling Interface
R718IB
The wireless communication is compatible with

Technical Parameter

Input Power
Sleeping Mode 22 uA
±0.1V
Accuracy

Weight 141g

112
Wireless 2-Input 0-10V ADC Sampling Interface
R718IB2

Technical Parameter

Input Power
Sleeping Mode 27uA

±0.1V
Accuracy

Weight 150g
113
Wireless Dry Contact Interface
R718J
R718Jcan be connected to external dry contact
devices, such as various switches, buttons, relays
and reed switch outputs. It can detect the
closure or disconnection signal of the dry
contacts. Based on SX1276 wireless
communication module, the wireless
communication is compatible with LoRaWAN™
protocol (ClassA).
• Dry contact device
Technical Parameter

Input Power
Sleeping Mode 22uA
±0.1V
Accuracy

Weight 141g
114
Wireless 2-Input Dry Contact Interface
R718J2
R718J2 can be connected to external dry contact
devices, such as various switches, buttons, relays
and reed switch outputs. It can detect the
closure or disconnection signal of the dry
contacts. Based on SX1276 wireless
communication module, the wireless
communication is compatible with LoRaWAN™
protocol (ClassA).
• Dry contact device
Technical Parameter

Input Power
Sleeping Mode 22uA
±0.1V
Accuracy

Weight 150g
115
Wireless Pulse Counter Interface
R718H
R718H wireless pulse counter series can be integrated
with up to four dry contact or mechanical switch and
closure devices to count the number of actuations
occurring within a given time frame for each input.
• Contacts that require pulse detection

counting
Technical Parameter

Input Power
Sleeping Mode 23 uA
±0.1V
Accuracy

Weight 141g
116
Wireless 2-Input Pulse Counter Interface
R718H2
R718H2 wireless pulse counter series can be
integrated with up to four dry contact or mechanical
switch and closure devices to count the number of
actuations occurring within a given time frame for
each input. The wireless communication is
compatible with LoRaWAN™ protocol (ClassA).
• Contacts that require pulse detection

counting
Technical Parameter

Input Power
Sleeping Mode 24 uA
±0.1V
Accuracy

Weight 150g
117
Wireless Hall Type Open/Close Detection Sensor
R718LB
This device is equipped with a Hall sensor, which can be
used for door and window switch state detection. It can
realize wireless alarm and other functions through the
built-in wireless module. It adopts SX1276 wireless
• Door and window sensor
Technical Parameter

Input Power
Sleeping Mode 23 uA
±0.1V
Accuracy

Weight 141g
118
Wireless 2-Gang Hall Type Open/Close Detection
Sensor
R718LB2
R718L2 is a open/close detection sensor based on hall
effect sensors. Unlike the R718F2 devices, the two
ferromagnetic contacts do not have to be joined
together for the device to detect the closed state. The
communication is fully compatible with LoRaWAN™
protocol (Class A).
• Door and window sensor
Technical Parameter

Input Power
Sleeping Mode 26uA
±0.1V
Accuracy

Weight 150g
119
Wireless Asset Sensor
R718MA
R718MA has a simple positioning function that detects

the position status of the device. It regularly reports
RSSI and SNR information to the gateway for
processing. Users can locate the device's position
according to the reported RSSI and SNR information.
The communication is fully compatible with

Technical Parameter

Input Power
Sleeping Mode 22 uA

Weight 141g
120
Wireless Activity Detection Sensor
R718MBA
It detects the sudden movement or vibration of

the device and sends an alarm signal to the
gateway for processing. It uses the SX1276
• Smart home; anti-theft system; industrial

equipment; security field
Technical Parameter

Input Power
Sleeping Mode 76 uA


Weight 141g
121
Wireless Activity Event Counter
R718MBB
The device detects the number of movements or
vibrations (such as detecting the motor a few times a
day), the maximum number of movements or vibrations
can reach 232 times (theoretical value), and sends the
information of the number of movements or vibrations to
the gateway for processing. Apply SX1276 wireless
• Smart home; industrial equipment
Technical Parameter

Input Power
Sleeping Mode R718MBB: 76 uA

Weight 141g
122
Wireless Activity Timer
R718MBC
The device detects the duration of the movement or
vibration (timekeeping) and sends the duration or timing
information of the movement or vibration to the gateway
for processing. The duration of the movement or vibration
can be up to 1000 hours (theoretical value). SX1276
• Smart home; industrial equipment
Technical Parameter

Input Power
Sleeping Mode 76 uA

Weight 141g
123
Wireless mA Current Meter Interface, 4~20mA
R718KA
The Wireless 4-20 mA DC Current Meter is
designed to offer a large selection of easy-to-use
current 4-20 mA data loggers for load monitoring.
• Sensors, measuring equipment,

instrumentation, others
Technical Parameter

Input Power
Sleeping Mode 21 uA
±0.1V
Accuracy

Weight 141g
124
Wireless 2-Input mA Current Meter Interface, 4~20mA
R718KA2
The Wireless 4-20 mA DC Current Meter is
designed to offer a large selection of easy-to-use
current 4-20 mA data loggers for load monitoring.
• Sensors, measuring equipment,

instrumentation, others
Technical Parameter

Input Power
Sleeping Mode 21uA
±0.1V
Accuracy

Weight 150g
125
Wireless RS485 Adapter
R718PC
This device only supports RS485 serial port transparent
transmission (RS485sensor power supply is DC12V), which can
send read commands to the sensor supporting RS-485 protocol
according to the configured cycle time. The information returned
by the sensor will be directly reported to the gateway, and in the
interface on the gateway to display, it uses SX1276 wireless
communication.
Main Feature
• DC 12V adapter power supply
• Protection level IP65
• RS485 serial port transparent transmission
• Smart home products
• Wireless transmission product
Technical Parameter
Power supply: 12V DC adapter
Working current: 35mA (when there is no external sensor)
Wake up current: 7mA

Weight 160g
-20℃ ～ 55℃
Range
126
Wireless RS232 Adapter
R718PDA
This device only supports RS232 serial port transparent transmission. It can
send read commands to the sensor supporting RS-232 protocol according to
the configured cycle time. The information returned by the sensor will be
directly reported to the gateway and displayed on the gateway for the
interface. It adopts SX1276. Wireless communication method.
Main Feature
• DC 12V adapter power supply
• Protection level IP65
• Smart home products
• Wireless transmission product
Power supply: 12V DC adapter
Working current: 35mA (when there is no external sensor)
Wake up current: 7mA

Weight 160g
-20℃ ～ 55℃
Range

Wireless 1-Phase Current Meter with 1 x 30A CT
R718N1
The NETVOX wireless single-phase current detector is used to
detect single-phase electrical input current. The device is
compatible with the LoRaWAN protocol, and integrates a chip
module that conforms to the LoRaWAN wireless protocol, and
joins the gateway to display the collected data in the gateway.
The device is a battery and receives the load AC current through
a current transformer.
• Devices requires current detection in the city such as
home or business
• Thermal system equipment

Input Power
Wake up Current 7mA
Transmitting Current (max) 127mA @3.3V
±0.1V
Accuracy
Current Measurement Accuracy <+-1%
Current measurement Accuracy 100mA to 30A
Range (depending on the current transformer configuration)
Rated Input Current 30A, 50Hz~60Hz

Rated Output Current 10mA
Ratio 3000:1
Phase Difference (at rated input) ≤10' (100Ω)
Linearity 0.1%
Isolation Withstand Voltage 3000V
Housing Material Flame Retardant Grade 94-V0 UL Material
Environmentally Friendly In line with ROHS
Working Temperature -40°C~+85°C
128
R718N17
The NETVOX wireless single-phase current detector is used to detect
single-phase electrical input current. The device is compatible with
the LoRaWAN protocol, and integrates a chip module that conforms
to the LoRaWAN wireless protocol, and joins the gateway to display
the collected data in the gateway.
The device is a battery and obtains the load AC current value through
a current transformer. The device adopts a switch-on current
transformer, which can be conveniently connected to the device to be
measured.
home or business
2 x 3.6V ER14505 lithium batteries parallel power supply

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Saturation Current ≥75A
Ratio 3000:1
Load Resistance 10Ω
Accuracy Level 1%
Working Temperature -40°C~+85°C 129
R718N115
The NETVOX wireless single-phase current detector is used to detect
single-phase electrical input current. The device is compatible with the
LoRaWAN protocol, and integrates a chip module that conforms to the
LoRaWAN wireless protocol, and joins the gateway to display the
collected data in the gateway.
The device is a battery and obtains the load AC current value through a
current transformer. The device adopts a switch-on current transformer,
which can be conveniently connected to the device to be measured.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Current measurement Accuracy 1A to 150A

Rated Output Current 33.33mA
Ratio 3000:1
Accuracy Level 1%（1A-150A）
R718N125
The NETVOX wireless single-phase current detector is used to detect single-
phase electrical input current. The device is compatible with the LoRaWAN
protocol, and integrates a chip module that conforms to the LoRaWAN
wireless protocol, and joins the gateway to display the collected data in the
gateway.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Rated Output Current 66.66 mA
Ratio 3000:1
R718N163
The NETVOX wireless single-phase current detector is used to detect single-
phase electrical input current. The device is compatible with the LoRaWAN
wireless protocol, and joins the gateway to display the collected data in the
gateway.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Ratio 6000:1
R718N3
The NETVOX wireless 3-phase current detector is used to detect 3-phase
electrical input current. The device is compatible with the LoRaWAN
wireless protocol, and joins the gateway to display the collected data in
the gateway.
The device is batteries and receives the load AC current through a current
transformer.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Ratio 3000:1
Phase Difference (at rated input) ≤10' (100Ω)
Linearity 0.1%
133
R718N37
The NETVOX wireless three-phase current detector is used to detect
three-phase electrical input current. The device is a battery and
receives AC current through a current transformer.
This device adopts open-loop current transformer, which can be
easily connected to the device to be tested. The A phase line, the B
phase line and the C phase line of the three-phase electric power are
respectively connected into the corresponding current transformers.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Ratio 3000:1
Accuracy Level 1%
134
R718N315
three-phase electrical input current. The device is a battery and receives
AC current through a current transformer.
This device adopts open-loop current transformer, which can be easily
connected to the device to be tested. The A phase line, the B phase line
and the C phase line of the three-phase electric power are respectively
connected into the corresponding current transformers.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Rated Output Current 33.33mA
Ratio 3000:1
R718N325
three-phase electrical input current. The device is a battery and receives
AC current through a current transformer.
connected to the device to be tested. The A phase line, the B phase line
and the C phase line of the three-phase electric power are respectively
connected into the corresponding current transformers.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy

Rated Output Current 66.66 mA
Ratio 3000:1
R718N363
The NETVOX wireless three-phase current detector is used to detect three-
phase electrical input current. The device is a battery and receives AC
current through a current transformer.
connected to the device to be tested. The A phase line, the B phase line and
the C phase line of the three-phase electric power are respectively connected
into the corresponding current transformers.
home or business

Input Power
Wake up Current 7mA
±0.1V
Accuracy
Current measurement Accuracy 10A~630A
Rated Input Current 300A，50Hz~60Hz
Ratio 6000:1
Wireless ADC / Dry Contact / Current Detector
R718IJK
This device is used to detect 4mA-20mA signal
equipment, 0-24V DC ADC sampling and dry contact
function, and it adopts SX1276 wireless communication
module.
R718IJK can detect 4mA-20mA signal, 0-24V DC ADC
sampling signal and dry contact input signal, and add
detection signal data to the gateway, and display the
collected data in the gateway.
Main Feature
power supply
ferrous object
• Sensor
• Testing Equipment

Power supply:
Standby current: 22.7uA
物理特性
Size: L: 112mm*W: 88.19mm*H: 32mm
Body weight: About 141g
Ambient temperature range: -20 ° C ~ 55 ° C
Ambient humidity range: <90% RH (non-condensing)
Housing material: Flame retardant grade 94-V0 UL material
Environmental protection: Compliance with ROHS

Wireless Valve Keeper
RA10
The valve disconnector RA10 is a wireless smart

device for home security and automatic irrigation.
It uses SX1276 wireless communication. Join RA10
to the gateway and realizes the operation of
automatically opening and closing the valve
through the instructions of other devices in the
network. It can also use the manual switch
function.
Technical Parameter
Power Supply DC12V

Working Voltage 12 VDC
Standby Current 25 mA
Maximum Load Current
550 mA
Consumption
Physical
Physical Size 152.99mm x 70.99mm x128.3mm
Operating Temperature -20 ° C ~ 55 ° C
Storage Temperature -40 ° C ~ 85 ° C
Ambient Humidity <90% RH (non-condensing)
Applicable Pipe Diameter 6 points (3/4 inch)
Drive Arm End Maximum Output
7.5 kgf
Force
Switching Angle 90 degrees
139
Wireless Plug-and-Play Power Outlet with
Consumption Monitoring
R809A
The R809A is a wireless power plug converter for indoor use. It can remotely control
the output switch and detect the output power. It integrates the LoRa/FSK modulation
communication wireless module SX1276, which can realize wireless remote control.
R809A is primarily used to measure electrical power consumption and wireless switch control.
Technical Parameter
Rated working power supply 100-240VAC, 50/60Hz

Typical operating power 0.6W/11mA/220VA
Resistive load: 16A/250VAC; P: 4000VA
Inductive load: 8A/220VAC; P: 1760VA (COSφ=0.4)
Typical Load Characteristics Motor load: 1.5HP/240VAC
White Lamp, fluorescent lamp, gold halogen lamp:
3000W/220VAC
Relay Switch Life Times 100,000 times
Current Measurement Range 100mA~16A
Energy Measurement Error <+-1%
Dimension 95mm*58mm*42.5mm (without plug part)
140
Wireless Plug-and-Play Power Outlet with
Consumption Monitoring (Power-off Alarm)
R809A01
The R809A01 is a wireless power plug converter for indoor use. It can remotely control the output switch
and detect the output power. It integrates the LoRa/FSK modulation communication wireless module
SX1276, which can realize wireless remote control. R809A01 has a 10A/230VAC output load capability
and is primarily used to measure electrical power consumption and wireless switch control. R809A01
supports the wireless module to send a power off alarm signal to the gateway after power off.
Technical Parameter
Rated working power supply 100-240VAC, 50/60Hz
Typical Operating Current 15mA/220VAC/1W
Resistive load: 16A/250VAC; P: 4000VA

Inductive load: 8A/220VAC; P: 1760VA (COSφ=0.4)
Typical Load Characteristics Motor load: 1.5HP/240VAC
White Lamp, fluorescent lamp, gold halogen lamp:
3000W/220VAC
Relay Switch Life Times 100,000 times
Current Measurement Accuracy
100mA~16A
Range
Energy Measurement Error <+-1%
141
Wireless US Type Wall Socket with Power Meter
R816B
R816B (wireless wall socket with energy consumption

monitoring (US)) is a smart electrical switch socket for indoor
use. It is suitable for US standard wall cassette installation. The
output socket is suitable for US standard 2 or 3 pole plug; rated
output load is 15A/120V.
(Note: the output of the upper socket is uncontrolled, the

output of the lower socket is the relay control output, and the
output power detection function is provided. There is a relay
control button and two LED indicators between the two
sockets.)
Technical Parameter
Electrical characteristics
Input power 100-240VAC, 50/60Hz
Typical power consumption 13mA/120VAC/0.8W
Built-in relay load characteristics Resistive load: 16A/250VAC; P: 4000VAInductive
load:8A/220VAC; P:1760VA (COS φ =0.4 )Motor load:
0.5HP/120VACIncandescent, fluorescent, gold halogen
lamps: 3000W/220VACAnti-surge current 200A/2ms
Relay switch life 100,000 times (pure resistive load)
Energy measurement error <±1%
Energy measurement accuracy range 100mA~15A
Flammability rating UL 94V-0
Physical characteristics
Shape size 113.0 mm * 69.0 mm * 39.5 mm (without wires)
Wire length (exposed) 160mm
Working environment humidity 5% to 85% RH (no conden )
Working environment temperature -10°C to 50°C
Storage ambient temperature -40°C to 85 °C
142
Wireless US Type Wall Socket with Power Meter
(Power-off Alarm)
R809B01
R816B (wireless wall socket with energy consumption
monitoring (US)) is a smart electrical switch socket for indoor
use. It is suitable for US standard wall cassette installation. The
output socket is suitable for US standard 2 or 3 pole plug; rated
output load is 15A/120V.
(Note: the output of the upper socket is uncontrolled, the

output of the lower socket is the relay control output, and the
output power detection function is provided. There is a relay
control button and two LED indicators between the two
sockets.)
**When the R816B01 is powered off, the R816B01 will

issue a power-off alarm command.
Technical Parameter
Electrical characteristics
Power supply 100-240VAC,50/60Hz
Typical power consumption 13mA/120VAC/0.8W
Built-in relay load characteristics Resistive resistance load: 16A/250VAC;
P:4000VAInductive load: 8A/220VAC; P:1760VA
(COS=0.4)Motor load: 0.5HP/120VACIncandescent,
fluorescent, gold halogen lamps:3000W/220VACAnti-
surge current 200A/2ms
Number of relay switch life 100,000 times (purely resistive load)
Energy measurement error <±1%
Energy measurement accuracy
100mA~15A
range
Flame retardant rating UL 94V-0
Physical properties
Size
113.0mm x 69.0mm x39.5mm(without wires)
Wire length (exposed) 160mm

Working environment humidity 5% ~ 85%RH (no condense)
Working environment temperature -10°C to 50°C
Storage ambient temperature -40°C to 85 °C 143
LoRa Module
R100H
The R100H is a low power transceiver based on the
SX1276 chip LoRaTM solution. The R100H is designed
for SMD mounting to the main PCB. SMD installations
provide the best RF performance at the lowest cost. In
addition, the R100H is designed to take up minimal board
space on the host PCB, which already includes a rich set
of interface ports and power management circuitry. As a
result, it can be easily integrated into other devices
without the need for RF experience and expertise.
The R100H operates in the 862-1020MHz band.
Main Feature
• High performance and low power 32-bit ARM
Cortex-M0 microprocessor
• Up to 20dBm power output
R100H
• Wide supply voltage range (1.8V - 3.6V DC)
LoRa Module
• Provide powerful and flexible development tools
Output Power: 19dBm±1dBm

Communication distance: TBD
Data transfer rate: 1.2～300kbps
Bandwidth: 862-928MHz
Modulation: LoRa/FSK (Remarks: Choose one of them)
Receive sensitivity: -121dBm
(Frequency deviation=5kHz,Bit Rate=1.2kb/s)
Operating Voltage: 1.8 to 3.6 V DC
Receiving current: 11mA (typical value)
Emission current: 120mA (typical value)
Working current: 2mA (typical value)
stand-by current: 8uA
Operating temperature: -20～85℃
Storage temperature: -55～115℃
Product Size: 16.0×24.5×3.0mm

LoRa Module
R100L
The Lora RF module R100L from NETVOX is a low-power
transceiver based on the SX1276 chip LoRaTM solution.
The R100L is designed for SMD mounting on the main
PCB. SMD installations provide the best RF performance
at the lowest cost. In addition, the R100L is designed to
take up minimal board space on the host PCB, which
already includes a rich set of interface ports and power
management circuitry. As a result, it can be easily
integrated into other devices without the need for RF
experience and expertise.
The R100L operates in the 470-510MHz band.
Main Feature
• High performance and low power 32-bit ARM
R100L Cortex-M0 microprocessor
LoRa Module • Up to 19dBm power output
• Wide supply voltage range (1.8V - 3.6V DC)
• Provide powerful and flexible development tools
Output Power: 19dBm±1dBm

Communication distance: TBD
Data transfer rate: 1.2～300kbps
Bandwidth: 470-510MHz
Modulation: LoRa/FSK (Remarks: Choose one of them)
Receive sensitivity: -121dBm
(Frequency deviation=5kHz,Bit Rate=1.2kb/s)
Operating Voltage: 1.8 to 3.6 V DC
Receiving current: 11mA (typical value)
Emission current: 120mA (typical value)
Working current: 2mA (typical value)
stand-by current: 8uA
Operating temperature: -20～85℃
Storage temperature: -55～115℃
Product Size: 16.0×24.5×3.0mm

R
NETVOX TECHNOLOGY CO., LTD.
TEL: 886-6-2617641
FAX: 886-6-2656120
E-mail: sales@netvox.com.tw
WEB: www.netvox.com.tw
NETVOX TECHNOLOGY CO., LTD (XIAMEN)

TEL: 86-592-5717188
FAX: 86-592-5717180
E-mail: dyx@netvox.com.cn
WEB: www.netvox.com.cn
146
All specifications are subjected to change with prior notice

Netvox LoRa Catalog PDF

Uploaded by

Copyright:

Available Formats

Netvox LoRa Catalog PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Netvox LoRa Catalog PDF

Uploaded by

Copyright:

Available Formats

R

Netvox LoRa Sensors & Devices

LoRa Alliance was formed to standardize LPWAN (Low Power Wide

Each LoRa gateway has the ability to handle up to millions of nodes.

LoRa also features an adaptive data rate algorithm to help

Specification LoRa Feature

Standard IEEE 802.15.4g

Where does LPWAN fit?

Important Factors in LPWAN?

The most critical factors in a LPWAN are:

Netvox Network Architecture

In a LoRaWAN™ network nodes are not associated with a specific gateway.

The intelligence and complexity is pushed to the network server, which

If a node is mobile or moving there is no handover needed from gateway

LoRaWAN™ Regional Summery

The LoRaWAN™ specification varies slightly from region to region based on

Joining the LoRa® Alliance as a contributor member and participating in the

Long Range Max Lifetime

Multi-Usage Low Cost

7. High capacity 10. Minimal infrastructure

Copyright©Netvox Technology Co., Ltd.

LoRa Frequency Characters

Copyright©Netvox Technology Co., Ltd.

* Actual range may vary depending on environment.

When the window is opened, R311A sends alarm

Input Power 2 x 3.0V CR2450 button batteries

Working Voltage DC 2.4V～3V

Voltage Measurement Accuracy ±0.1V

Main Body Dimension 57mm x 35mm x 15mm

Environment Humidity Range <90% RH (No condensation)

Input Power 2pcs 3.0V CR2450 button battery

Working Voltage DC 2.4V～3.0V

Environment Humidity Range <90% RH (No condensation)

2 sections of 3V CR2450 button batteries in parallel

Main Body Dimension 57mm x 35mm x 15.2mm

Environment Humidity Range <90% RH (No condensation)

2 sections of 3V CR2450 button batteries in parallel

Voltage Measurement Accuracy ±0.1V

Main Body Dimension 57mm x 35mm x 15.2mm

Environment Humidity Range <90% RH (No condensation)

2 x 3.6V ER14505 AA lithium batteries

Dimension Main Part: L: 112mm*W: 65mm*H: 32mm

2 x 3.6V ER14505 AA lithium batteries

Dimension Main Part: L: 112mm*W: 65mm*H: 32mm

2 sections of 3V CR2450 button batteries in parallel

Main Body Dimension 57mm x 35mm x 15.2mm

Environment Humidity Range <90% RH (No condensation)

Input Power 2 x 3.0V CR2450 button batteries

Main Body Dimension 57mm x 35mm x 15mm

 Detect home electrical device falls and power

 Columns, poles and other applications such as tilt

Battery measurement accuracy ± 0.1V

Tilt Sensor Characteristics

Input Power 2 x 3.0V CR2450 button batteries

Operation Voltage DC +2.4V～3.0V

Water Leakage Material UL2468 28AWG

Power Supply 2pcs of 3.6V ER14505 AA

Measurement Accuracy ±0.1V

Input power 2 x1.5V AAA alkaline batteries

Dimension Main Part: L: 112mmW: 65mmH: 32mm

Dimension Main Part: L: 112mmW: 65mmH: 32mm

Vibration Sensor Case Size L:43mmW:13mmH:12mm

Vibration Sensor Case Size L:43mmW:13mmH:12mm

Dimension Main Part: L: 112mmW: 65mmH: 32mm

Dimension Main Part: L: 112mmW: 65mmH: 32mm

Dimension Main Body: L: 112mmW: 65mmH: 28.8mm

Dimension Main Body: L: 112mmW: 65mmH: 28.8mm