Expert tip:

FORGED AND HARDENED THROUGHOUT

Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (MB-) / Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco MB 500

Moil point 70 024 01 090 - 900 39

Flat chisel (cross) 70 024 02 090 90 900 39
Wide chisel (cross) 70 024 22 084 180 840 39
Asphalt cutter (parallel) 70 024 55 088 200 880 39

Atlas Copco MB 700 / MB 800 / CP 750

Moil point 70 027 01 100 - 1000 56

Flat chisel (cross) 70 027 02 100 100 1000 56
Wide chisel (cross) 70 027 24 095 200 950 56
Blunt tool point 70 027 00 093 - 930 56

Atlas Copco MB 1000

Moil point 70 034 01 110 - 1100 79

Flat chisel (cross) 70 034 02 110 120 1100 79
Blunt tool point 70 034 00 102 - 1020 79

Atlas Copco MB 1200

Moil point 70 028 01 110 - 1100 87

Flat chisel (cross) 70 028 02 110 120 1100 87
Blunt tool point 70 028 00 102 - 1020 87

Atlas Copco MB 1600 / CP 1650

Moil point 70 018 01 110 - 1100 106

Percussion buster 70 018 90 120 - 1200 106
Flat chisel (cross) 70 018 02 110 135 1100 106
Blunt tool point 70 018 00 100 - 1000 106

V 12.03 12
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (HB-) /Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco MB 1700

Moil point 70 026 01 120 - 1200 128

Flat chisel (cross) 70 026 02 120 140 1200 128
Blunt tool point 70 026 00 110 - 1100 128

Atlas Copco HB 2200 / CP 2250

Moil point 70 030 01 130 - 1300 160

Flat chisel (cross) 70 030 02 130 150 1300 160
Blunt tool point 70 030 00 120 - 1200 160

Atlas Copco HB 3000 / HB 3100 / CP 3050

Moil point 70 032 01 135 - 1350 197

Flat chisel (cross) 70 032 02 135 165 1350 197
Blunt tool point 70 032 00 125 - 1250 197

Atlas Copco HB 4200 / CP 4250

70 033 ... on request

13 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (PB-) / Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco PB 110 / CP 100

Moil point 70 110 01 041 - 410 4

Moil point 70 110 01 050 - 500 4,8
Flat chisel (cross) 70 110 02 041 42 410 4
Wide chisel (cross) 70 110 70 037 120 370 4
Asphalt cutter (parallel) 70 110 43 038 100 380 4
Forged plate incl. shank-end 70 110 95 038 200x200 380 15

Atlas Copco PB 160 / CP 150

Moil point 70 111 01 053 - 530 8,5

Moil point 70 111 01 068 - 680 11
Flat chisel (cross) 70 111 02 053 52 530 8,5
Wide chisel (cross) 70 111 18 050 140 500 8,5
Asphalt cutter (parallel) 70 111 83 051 115 510 8,5
Forged plate incl. shank-end 70 111 95 050 200x200 500 19,5

Atlas Copco PB 210 / CP 200

Moil point 70 112 01 060 - 600 12

Moil point 70 112 01 075 - 750 16
Flat chisel (cross) 70 112 02 060 62 600 12
Wide chisel (cross) 70 112 34 055 150 550 12
Asphalt cutter (parallel) 70 112 69 057 130 570 12
Forged plate incl. shank-end 70 112 95 055 200x200 550 22

Atlas Copco PB 310 / CP 300

Moil point 70 113 01 074 - 740 19

Flat chisel (cross) 70 113 02 074 70 740 19
Wide chisel (cross) 70 113 34 069 150 690 19
Asphalt cutter (parallel) 70 113 65 072 150 720 19
Forged plate incl. shank-end 70 113 95 069 200x200 690 29

Atlas Copco PB 420 / 530 / CP 400 / CP 550

Moil point 70 029 01 080 - 800 28,5

Flat chisel (cross) 70 029 02 080 80 800 28,5
Wide chisel (cross) 70 029 20 076 160 760 28,5
Asphalt cutter (parallel) 70 029 65 079 150 790 28,5

V 12.03 14
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (SB-, SBC-, TEX-) / Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco SB 50 / SBC 60 / TEX 30 H

Moil point 70 512 01 041 - 410 2,3

Flat chisel (cross) 70 512 02 041 32 410 2,3
Asphalt cutter (cross) 70 512 13 041 100 410 2,7
Forged plate incl. shank-end 70 512 95 039 200x200 390 13,1

Atlas Copco SB 52

Moil point 70 500 01 042 - 420 4,1

Flat chisel (cross) 70 500 02 042 40 420 4,1
Wide chisel (cross) 70 500 70 037 120 370 4,1
Asphalt cutter (parallel) 70 500 43 040 100 400 4,1
Forged plate incl. shank-end 70 500 95 040 200x200 400 15,5

Atlas Copco SB 102 / SB 100MK2

Moil point 70 502 01 045 - 450 4,9

Flat chisel (cross) 70 502 02 045 45 450 4,9
Wide chisel (cross) 70 502 70 041 120 410 4,9
Asphalt cutter (parallel) 70 502 43 042 100 420 4,9
Forged plate incl. shank-end 70 502 95 043 200x200 430 16,5

Atlas Copco SB 100 / 110 / SBC 115 / TEX 75 / 80 / 100 H

CP 75H / 80H / 100H

Moil point 70 503 01 055 - 550 6,5

Moil point 70 503 01 070 - 700 8
Flat chisel (cross) 70 503 02 055 45 550 6,5
Wide chisel (cross) 70 503 70 051 120 510 6,2
Asphalt cutter (parallel) 70 503 47 048 125 480 6,2
Forged plate incl. shank-end 70 503 95 052 200x200 520 16,5

Atlas Copco SB 150 / 150 MK2 / 152 / SBC 255 / SBU 160 / TEX 110 H
CP 110H

Moil point 70 510 01 051 - 510 6,5

Moil point 70 510 01 075 - 750 10,5
Flat chisel (cross) 70 510 02 051 50 510 6,5
Wide chisel (cross) 70 510 16 048 125 480 6,5
Asphalt cutter (parallel) 70 510 83 049 115 490 6,5
Forged plate incl. shank-end 70 510 95 047 200x200 470 17

15 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (SB-, SBC-, TEX-) / Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco SB 200 / 202 / SBC 410 / SBU 220 / TEX 180 H
CP 180H

Moil point 70 509 01 060 - 600 13

Moil point 70 509 01 080 - 800 18,6
Flat chisel (cross) 70 509 02 060 65 600 13
Wide chisel (cross) 70 509 16 065 125 650 15,5
Forged plate incl. shank-end 70 509 95 055 200x200 550 23

Atlas Copco TEX 250 H

CP 250H

Moil point 70 505 01 080 - 800 27

Flat chisel (cross) 70 505 02 080 80 800 27
Wide chisel (cross) 70 505 20 077 160 770 27

Atlas Copco SB 300 / 302 / SBC 610 / 650 / SBU 340

CP 290H

Moil point 70 514 01 080 - 800 28

Flat chisel (cross) 70 514 02 080 80 800 28
Wide chisel (cross) 70 514 20 077 160 770 28

Atlas Copco SB 450 / 452 / SBC 800 / 850 / TEX 400

CP 400H

Moil point 70 511 01 084 - 840 40

Flat chisel (cross) 70 511 02 084 95 840 40

Atlas Copco SB 552

Moil point 70 523 01 090 - 900 49

Flat chisel (cross) 70 523 02 090 100 900 49
Wide chisel (cross) 70 523 24 085 200 850 49

V 12.03 16
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Atlas Copco (HBC-, TEX-) / Chicago Pneumatic (CP-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Atlas Copco HBC 1100-1700HD / TEX 600-900H

CP 600H / 700H / 900H

Moil point 70 506 01 090 - 900 53

Flat chisel (cross) 70 506 02 090 105 900 53

Atlas Copco HBC 2500 / TEX 1400H

CP 1400H, CP 1550

Moil point 70 508 01 110 - 1100 96,5

Flat chisel (cross) 70 508 02 110 128 1100 96,5

Atlas Copco HBC 4000 / TEX 1800 / 2000 / TEX 1800H / 2000H
CP 1800H / 2000H

Moil point 70 507 01 110 - 1100 108

Flat chisel (cross) 70 507 02 110 135 1100 108

Atlas Copco HBC 6000

70 519 ... on request

17 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Berco / AT
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

AT 20 / Berco BB 42

Moil point 70 110 01 041 - 410 4

Moil point 70 110 01 050 - 500 4,8
Flat chisel (cross) 70 110 02 041 42 410 4
Wide chisel (cross) 70 110 70 037 120 370 4
Asphalt cutter (parallel) 70 110 43 038 100 380 4
Forged plate incl. shank-end 70 110 95 038 200x200 380 15

AT 70 / Berco BB 52

Moil point 70 111 01 053 - 530 8,5

Moil point 70 111 01 068 - 680 11
Flat chisel (cross) 70 111 02 053 52 530 8,5
Wide chisel (cross) 70 111 18 050 140 500 8,5
Asphalt cutter (parallel) 70 111 83 051 115 510 8,5
Forged plate incl. shank-end 70 111 95 050 200x200 500 19,5

AT 120 / Berco BB 62

Moil point 70 112 01 060 - 600 12

Moil point 70 112 01 075 - 750 16
Flat chisel (cross) 70 112 02 060 62 600 12
Wide chisel (cross) 70 112 34 055 150 550 12
Asphalt cutter (parallel) 70 112 69 057 130 570 12
Forged plate incl. shank-end 70 112 95 055 200x200 550 22

AT 170 / Berco BB 70

Moil point 70 113 01 074 - 740 19

Flat chisel (cross) 70 113 02 074 70 740 19
Wide chisel (cross) 70 113 34 069 150 690 19
Asphalt cutter (parallel) 70 113 65 072 150 720 19
Forged plate incl. shank-end 70 113 95 069 200x200 690 29

AT 220 / Berco BB 80

Moil point 70 029 01 080 - 800 28,5

Flat chisel (cross) 70 029 02 080 80 800 28,5
Wide chisel (cross) 70 029 20 076 160 760 28,5
Asphalt cutter (parallel) 70 029 65 079 150 790 28,5

V 12.03 18
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Bobcat (HB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Bobcat HB 280

Moil point 70 082 01 044 - 440 4,5

Flat chisel (cross) 70 082 02 044 40 440 4,5
Wide chisel (cross) 70 082 70 041 120 410 4,5

Bobcat HB 380

Moil point 70 080 01 044 - 440 4,7

Flat chisel (cross) 70 080 02 044 42 440 4,7
Wide chisel (cross) 70 080 70 039 120 390 4,5
Asphalt cutter (parallel) 70 080 43 040 100 400 4,5
Forged plate incl. shank-end 70 080 95 041 200x200 410 16

Bobcat HB 580

Moil point 70 076 01 046 - 460 5,5

Flat chisel (cross) 70 076 02 046 45 460 5,5
Wide chisel (cross) 70 076 18 043 140 430 5,65
Asphalt cutter (parallel) 70 076 83 044 115 440 5,65
Forged plate incl. shank-end 70 076 95 043 200x200 430 17

Bobcat HB 680

Moil point 70 079 01 054 - 540 9,1

Flat chisel (cross) 70 079 02 054 54 540 9,1
Wide chisel (cross) 70 079 18 050 140 500 8,8
Asphalt cutter (parallel) 70 079 83 051 115 510 8,8
Forged plate incl. shank-end 70 079 95 051 200x200 510 20,5

Bobcat HB 880

Moil point 70 077 01 060 - 600 13,5

Flat chisel (cross) 70 077 02 060 62 600 13,5
Wide chisel (cross) 70 077 34 054 150 540 13,1
Asphalt cutter (parallel) 70 077 69 056 130 560 13,1
Forged plate incl. shank-end 70 077 95 055 200x200 550 25

19 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Bobcat (HB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Bobcat HB 980

Moil point 70 078 01 065 - 650 18,5

Flat chisel (cross) 70 078 02 065 69 650 18,5
Wide chisel (cross) 70 078 22 061 180 610 18,5
Asphalt cutter (parallel) 70 078 55 066 200 660 20
Forged plate incl. shank-end 70 078 95 060 200x200 600 30,5

Bobcat HB 1180

Moil point 70 081 01 070 - 700 22,5

Flat chisel (cross) 70 081 02 070 77 700 22,5
Wide chisel (cross) 70 081 34 065 150 650 22,5
Asphalt cutter (parallel) 70 081 63 068 160 680 22,5

Bobcat HB 1380

Moil point 70 083 01 079 - 790 31

Flat chisel (cross) 70 083 02 079 85 790 31
Wide chisel (cross) 70 083 22 074 180 740 31
Asphalt cutter (parallel) 70 083 53 077 180 770 31

Bobcat HB 2380

Moil point 70 074 01 085 - 850 40,5

Flat chisel (cross) 70 074 02 085 95 850 40,5
Wide chisel (cross) 70 074 24 080 200 800 40

V 12.03 20
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Bobcat (B-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Bobcat B 290, B 300

Moil point 70 068 01 041 - 410 3,5

Moil point 70 068 01 056 - 560 5,5
Flat chisel (cross) 70 068 02 041 45 410 3,5
Wide chisel (cross) 70 068 70 044 120 440 4,5
Asphalt cutter (parallel) 70 068 43 045 100 450 4,5
Forged plate incl. shank-end 70 068 95 038 200x200 380 14

Bobcat B 400

Moil point 70 055 01 050 - 500 5

Moil point 70 055 01 070 - 700 7
Flat chisel (cross) 70 055 02 050 45 500 5
Wide chisel (cross) 70 055 70 046 120 460 5
Asphalt cutter (parallel) 70 055 43 047 100 470 5
Forged plate incl. shank-end 70 055 95 047 200x200 470 16

Bobcat B 500

Moil point 70 065 01 043 - 430 5,5

Moil point 70 065 01 075 - 750 10,5
Flat chisel (cross) 70 065 02 043 50 430 5,5
Wide chisel (cross) 70 065 18 040 140 400 5,5
Asphalt cutter (parallel) 70 065 83 041 115 410 5,5
Forged plate incl. shank-end 70 065 95 040 200x200 400 16

Bobcat B 600 / B 700

Moil point 70 064 01 051 - 510 6,5

Moil point 70 064 01 075 - 750 10
Flat chisel (cross) 70 064 02 051 50 510 6,5
Wide chisel (cross) 70 064 18 048 140 480 6,5
Asphalt cutter (parallel) 70 064 83 049 115 490 6,5
Forged plate incl. shank-end 70 064 95 048 200x200 480 17

21 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Bobcat (B-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Bobcat B 850 / B 950

Moil point 70 070 01 060 - 600 12,5

Moil point 70 070 01 090 - 900 18
Flat chisel (cross) 70 070 02 060 65 600 12,5
Wide chisel (cross) 70 070 34 055 150 550 12,5
Asphalt cutter (parallel) 70 070 69 057 130 570 12,5
Forged plate incl. shank-end 70 070 95 055 200x200 550 23

Bobcat B 1200 / B 1400

Moil point 70 069 01 072 - 720 21,5

Flat chisel (cross) 70 069 02 072 75 720 21,5
Wide chisel (cross) 70 069 34 067 150 670 21,5
Asphalt cutter (parallel) 70 069 65 070 150 700 21,5
Forged plate incl. shank-end 70 069 95 067 200x200 670 30

V 12.03 22
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Case / Case New Holland

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CNH CB18

Moil point 70 587 01 036 - 360 3,2

Moil point 70 587 01 060 - 600 5,7
Flat chisel (cross) 70 587 02 036 42 360 3,2
Wide chisel (cross) 70 587 70 035 120 350 3,4
Asphalt cutter (parallel) 70 587 43 038 100 380 3,4

CNH CB27

Moil point 70 588 01 041 - 410 4

Moil point 70 588 01 060 - 600 6
Flat chisel (cross) 70 588 02 041 42 410 4
Wide chisel (cross) 70 588 70 039 120 390 4,2
Asphalt cutter (parallel) 70 588 43 042 100 420 4,2
Forged plate incl. shank-end 70 588 95 042 200x200 420 16

CNH CB32 / Case CB140

Moil point 70 566 01 048 - 480 5,5

Moil point 70 566 01 058 - 580 6
Flat chisel (cross) 70 566 02 048 45 480 5,5
Wide chisel (cross) 70 566 70 044 120 440 5
Asphalt cutter (parallel) 70 566 43 045 100 450 5
Forged plate incl. shank-end 70 566 95 045 200x200 450 16

CNH CB37

Moil point 70 589 01 051 - 510 7,2

Moil point 70 589 01 070 - 700 10
Flat chisel (cross) 70 589 02 051 50 510 7,2
Wide chisel (cross) 70 589 18 048 140 480 7,2
Asphalt cutter (parallel) 70 589 83 049 115 490 7,2
Forged plate incl. shank-end 70 589 95 048 200x200 480 18,5

CNH CB45 / Case CB200

Moil point 70 576 01 051 - 510 7

Moil point 70 576 01 075 - 750 10,5
Flat chisel (cross) 70 576 02 051 50 510 7
Wide chisel (cross) 70 576 18 048 140 480 6,5
Asphalt cutter (parallel) 70 576 83 049 115 490 6,5
Forged plate incl. shank-end 70 576 95 048 200x200 480 17

23 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Case / Case New Holland

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CNH CB65 / Case CB370

Moil point 70 565 01 070 - 700 15

Moil point 70 565 01 081 - 810 17,6
Flat chisel (cross) 70 565 02 070 65 700 15
Wide chisel (cross) 70 565 34 055 150 550 12,5
Asphalt cutter (parallel) 70 565 69 057 130 570 12,5
Forged plate incl. shank-end 70 565 95 065 200x200 650 25

CNH CB85 / Case CB620

Moil point 70 567 01 074 - 740 20

Flat chisel (cross) 70 567 02 074 70 740 20
Wide chisel (cross) 70 567 34 069 150 690 20
Asphalt cutter (parallel) 70 567 65 072 150 720 20
Forged plate incl. shank-end 70 567 95 069 200x200 690 28

CNH CB120 / Case CB735

Moil point 70 577 01 084 - 840 35,5

Flat chisel (cross) 70 577 02 084 90 840 35,5
Wide chisel (cross) 70 577 22 084 180 840 38
Asphalt cutter (parallel) 70 577 55 088 200 880 38

CNH CB150 / Case CB1150

Moil point 70 574 01 090 - 900 45

Moil point 70 574 01 100 - 1000 50
Flat chisel (cross) 70 574 02 090 95 900 45
Wide chisel (cross) 70 574 24 080 200 800 42
Asphalt cutter (parallel) 70 574 55 083 200 830 42

Case CB1450

Moil point 70 569 01 105 - 1050 65

Flat chisel (cross) 70 569 02 105 106 1050 65
Blunt tool point 70 569 00 098 - 980 65

V 12.03 24
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Case / Case New Holland

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CNH CB200S

Moil point 70 586 01 100 - 1000 70

Flat chisel (cross) 70 586 02 100 115 1000 70
Blunt tool point 70 586 00 098 - 980 78

CNH CB260S

Moil point 70 594 01 110 - 1100 92,5

Flat chisel (cross) 70 594 02 110 125 1100 92,5
Blunt tool point 70 594 00 102 - 1020 92,5

CNH CB320S / Case CB3750

Moil point 70 571 01 110 - 1100 101

Flat chisel (cross) 70 571 02 110 130 1100 101
Blunt tool point 70 571 00 102 - 1020 101

CNH CB400S / Case CB4000

Moil point 70 575 01 120 - 1200 129

Flat chisel (cross) 70 575 02 120 140 1200 129
Blunt tool point 70 575 00 110 - 1100 129

CNH CB550S / Case CB5200

Moil point 70 580 01 140 - 1400 198

Flat chisel (cross) 70 580 02 140 160 1400 198
Blunt tool point 70 580 00 125 - 1250 192

CNH CB700S / Case CB6000

Moil point 70 583 01 145 - 1450 247

Flat chisel (cross) 70 583 02 145 175 1450 247
Blunt tool point 70 583 00 135 - 1350 247

25 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Caterpillar
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CAT H35 Ds

Moil point 70 584 01 041 - 410 3,8

Flat chisel (cross) 70 584 02 041 42 410 3,8
Wide chisel (cross) 70 584 70 036 120 360 3,8
Asphalt cutter (parallel) 70 584 43 038 100 380 3,8
Forged plate incl. shank-end 70 584 95 042 200x200 420 15

CAT H45 / H45s

Moil point 70 566 01 048 - 480 5,5

Moil point 70 566 01 058 - 580 6
Flat chisel (cross) 70 566 02 048 45 480 5,5
Wide chisel (cross) 70 566 70 044 120 440 5
Asphalt cutter (parallel) 70 566 43 045 100 450 5
Forged plate incl. shank-end 70 566 95 045 200x200 450 16

CAT H 45Ds

Moil point 70 585 01 051 - 510 6,7

Moil point 70 585 01 075 - 750 10,4
Flat chisel (cross) 70 585 02 051 50 510 6,7
Wide chisel (cross) 70 585 18 048 140 480 6,7
Asphalt cutter (parallel) 70 585 83 049 115 490 6,7
Forged plate incl. shank-end 70 585 95 048 200x200 480 18,5

CAT H50 / H50s

Moil point 70 576 01 051 - 510 7

Moil point 70 576 01 075 - 750 10,5
Flat chisel (cross) 70 576 02 051 50 510 7
Wide chisel (cross) 70 576 18 048 140 480 6,5
Asphalt cutter (parallel) 70 576 83 049 115 490 6,5
Forged plate incl. shank-end 70 576 95 048 200x200 480 17

CAT H 55Ds

Moil point 70 581 01 058 - 580 10,2

Flat chisel (cross) 70 581 02 058 55 580 10,2
Wide chisel (cross) 70 581 18 055 140 550 10,2
Asphalt cutter (parallel) 70 581 83 056 115 560 10,2
Forged plate incl. shank-end 70 581 95 055 200x200 550 20

V 12.03 26
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Caterpillar
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CAT H63 / H63s

Moil point 70 565 01 070 - 700 15

Moil point 70 565 01 081 - 810 17,6
Flat chisel (cross) 70 565 02 070 65 700 15
Wide chisel (cross) 70 565 34 055 150 550 12,5
Asphalt cutter (parallel) 70 565 69 057 130 570 12,5
Forged plate incl. shank-end 70 565 95 065 200x200 650 25

CAT H 65Ds

Moil point 70 582 01 070 - 700 16

Flat chisel (cross) 70 582 02 070 65 700 16
Wide chisel (cross) 70 582 34 055 150 550 13,5
Asphalt cutter (parallel) 70 582 69 057 130 570 13,5
Forged plate incl. shank-end 70 582 95 065 200x200 650 26

CAT H70 / H70s

Moil point 70 567 01 074 - 740 20

Flat chisel (cross) 70 567 02 074 70 740 20
Wide chisel (cross) 70 567 34 069 150 690 20
Asphalt cutter (parallel) 70 567 65 072 150 720 20
Forged plate incl. shank-end 70 567 95 069 200x200 690 28

CAT H90C / H90Cs

Moil point 70 577 01 084 - 840 35,5

Flat chisel (cross) 70 577 02 084 90 840 35,5
Wide chisel (cross) 70 577 22 084 180 840 38
Asphalt cutter (parallel) 70 577 55 088 200 880 38

CAT H90

Moil point 70 454 01 089 - 890 38

Flat chisel (cross) 70 454 02 089 90 890 38
Wide chisel (cross) 70 454 22 084 180 840 38
Asphalt cutter (parallel) 70 454 53 087 180 870 38

27 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Caterpillar
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CAT H100 / H100s

Moil point 70 574 01 090 - 900 45

Moil point 70 574 01 100 - 1000 50
Flat chisel (cross) 70 574 02 090 95 900 45
Wide chisel (cross) 70 574 24 080 200 800 42
Asphalt cutter (parallel) 70 574 55 083 200 830 42

CAT H115s

Moil point 70 569 01 105 - 1050 65

Flat chisel (cross) 70 569 02 105 106 1050 65
Blunt tool point 70 569 00 098 - 980 65

CAT H120Cs

Moil point 70 578 01 106 - 1060 77

Flat chisel (cross) 70 578 02 106 115 1060 77
Blunt tool point 70 578 00 098 - 980 77

CAT H130

Moil point 70 561 01 110 - 1100 102

Flat chisel (cross) 70 561 02 110 130 1100 102
Blunt tool point 70 561 00 102 - 1020 102

CAT H130C, H130s

Moil point 70 571 01 110 - 1100 101

Flat chisel (cross) 70 571 02 110 130 1100 101
Blunt tool point 70 571 00 102 - 1020 101

V 12.03 28
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Caterpillar
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

CAT H140, H140s

Moil point 70 568 01 120 - 1200 128

Flat chisel (cross) 70 568 02 120 140 1200 128
Blunt tool point 70 568 00 110 - 1100 128

CAT H140Cs / Ds

Moil point 70 575 01 120 - 1200 129

Flat chisel (cross) 70 575 02 120 140 1200 129
Blunt tool point 70 575 00 110 - 1100 129

CAT H160

Moil point 70 563 01 130 - 1300 183

Flat chisel (cross) 70 563 02 130 160 1300 183
Blunt tool point 70 563 00 120 - 1200 183

CAT H160Cs

Moil point 70 580 01 140 - 1400 198

Flat chisel (cross) 70 580 02 140 160 1400 198
Blunt tool point 70 580 00 125 - 1250 192

CAT H170

70 562 ... on request

CAT H195s

70 579 ... on request

29 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Drago
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Drago DRH 80

Moil point 70 701 01 051 - 510 6,9

Flat chisel (cross) 70 701 02 051 50 510 6,9
Wide chisel (cross) 70 701 18 048 140 480 6,9
Asphalt cutter (parallel) 70 701 83 049 115 490 6,9
Forged plate incl. shank-end 70 701 95 048 200x200 480 17

Drago DRH 120

Moil point 70 702 01 060 - 600 11

Flat chisel (cross) 70 702 02 060 58 600 11
Wide chisel (cross) 70 702 34 056 150 560 11
Asphalt cutter (parallel) 70 702 69 058 130 580 11
Forged plate incl. shank-end 70 702 95 056 200x200 560 21

Drago DRH 150

Moil point 70 140 01 070 - 700 15

Flat chisel (cross) 70 140 02 070 65 700 15
Wide chisel (cross) 70 140 34 065 150 650 15
Asphalt cutter (parallel) 70 140 69 067 130 670 15
Forged plate incl. shank-end 70 140 95 065 200x200 650 24

Drago DRH 180 / 250

Moil point 70 704 01 072 - 720 21

Flat chisel (cross) 70 704 02 072 75 720 21
Wide chisel (cross) 70 704 34 067 150 670 21
Asphalt cutter (parallel) 70 704 65 070 150 700 21
Forged plate incl. shank-end 70 704 95 067 200x200 670 29

Drago DRH 280

Moil point 70 703 01 084 - 840 39

Flat chisel (cross) 70 703 02 084 95 840 39

V 12.03 30
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Drago
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Drago DRH 650 / 900

Moil point 70 705 01 094 - 940 65

Flat chisel (cross) 70 705 02 094 115 940 65
Blunt tool point 70 705 00 086 - 860 65

Drago DRH 1150 / 1600

Moil point 70 707 01 120 - 1200 112

Flat chisel (cross) 70 707 02 120 135 1200 112
Blunt tool point 70 707 00 110 - 1100 112

Drago DRH 1900

70 708 ... on request

31 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

D&A / Arden
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

D&A S80 , 8V / Arden AB 100

70 310 ... on request

D&A S150 , S200 , 15V , 20V / Arden AB 150 , AB 210

Moil point 70 311 01 058 - 580 10

Flat chisel (cross) 70 311 02 058 57 580 10
Wide chisel (cross) 70 311 18 055 140 550 10
Asphalt cutter (parallel) 70 311 83 056 115 560 10
Forged plate incl. shank-end 70 311 95 055 200x200 550 20

D&A S300 , S500 , 30V , 50V / Arden AB 280 , AB 350

Moil point 70 312 01 074 - 740 19,4

Flat chisel (cross) 70 312 02 074 70 740 19,4
Wide chisel (cross) 70 312 34 069 150 690 19,4
Asphalt cutter (parallel) 70 312 69 071 130 710 19,4
Forged plate incl. shank-end 70 312 95 069 200x200 690 28

D&A S700 , 70V / Arden AB 450

70 314 ... on request

D&A S800 , 80V / Arden AB 550

70 313 ... on request

V 12.03 32
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

D&A / Arden
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

D&A S1300 , 130V / Arden AB 1050

70 315 ... on request

D&A S2200 , 200V , 220V / Arden AB 1850

70 317 ... on request

33 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Euroram / Globram
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Euroram / Globram RM 45

Moil point 70 804 01 050 - 500 5

Flat chisel (cross) 70 804 02 050 45 500 5
Wide chisel (cross) 70 804 70 046 120 460 5
Asphalt cutter (parallel) 70 804 43 047 100 470 5
Forged plate incl. shank-end 70 804 95 047 200x200 470 16

Euroram / Globram RM 48

Moil point 70 790 01 057 - 570 7,5

Flat chisel (cross) 70 790 02 057 50 570 7,5
Wide chisel (cross) 70 790 18 054 140 540 7,5
Asphalt cutter (parallel) 70 790 83 055 115 550 7,5
Forged plate incl. shank-end 70 790 95 054 200x200 540 17

Euroram / Globram RM 56

Moil point 70 791 01 060 - 600 10

Flat chisel (cross) 70 791 02 060 57 600 10
Wide chisel (cross) 70 791 18 056 140 560 10
Asphalt cutter (parallel) 70 791 83 057 115 570 10
Forged plate incl. shank-end 70 791 95 056 200x200 560 20

Euroram / Globram RM 65

Moil point 70 792 01 070 - 700 16

Flat chisel (cross) 70 792 02 070 65 700 16
Wide chisel (cross) 70 792 34 065 150 650 16
Asphalt cutter (parallel) 70 792 69 067 130 670 16
Forged plate incl. shank-end 70 792 95 065 200x200 650 25

Euroram / Globram RM 75

Moil point 70 806 01 072 - 720 20

Flat chisel (cross) 70 806 02 072 75 720 20
Wide chisel (cross) 70 806 34 067 150 670 20
Asphalt cutter (parallel) 70 806 65 070 150 700 20
Forged plate incl. shank-end 70 806 95 067 200x200 670 30

V 12.03 34
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Euroram / Globram
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Euroram / Globram RM 80

Moil point 70 793 01 070 - 700 23

Flat chisel (cross) 70 793 02 070 80 700 23
Wide chisel (cross) 70 793 22 066 180 660 23
Asphalt cutter (parallel) 70 793 53 069 180 690 23

Euroram / Globram RM 85 / 90

Moil point 70 794 01 080 - 800 33

Flat chisel (cross) 70 794 02 080 90 800 33
Wide chisel (cross) 70 794 22 074 180 740 33
Asphalt cutter (parallel) 70 794 55 079 200 790 33

Euroram / Globram RM 110

Moil point 70 795 01 100 - 1000 66

Flat chisel (cross) 70 795 02 100 114 1000 66

Euroram / Globram RM 115

Moil point 70 797 01 100 - 1000 70

Flat chisel (cross) 70 797 02 100 114 1000 70
Blunt tool point 70 797 00 092 - 920 70

Euroram / Globram RM 120

Moil point 70 796 01 110 - 1100 84

Flat chisel (cross) 70 796 02 110 120 1100 84
Blunt tool point 70 796 00 102 - 1020 84

35 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Euroram / Globram
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Euroram / Globram RM 130

Moil point 70 800 01 113 - 1130 105

Flat chisel (cross) 70 800 02 113 130 1130 105
Blunt tool point 70 800 00 110 - 1100 109

Euroram / Globram RM 140

Moil point 70 803 01 120 - 1200 127

Flat chisel (cross) 70 803 02 120 140 1200 127
Blunt tool point 70 803 00 110 - 1100 127

Euroram / Globram RM 145

Moil point 70 798 01 130 - 1300 148

Flat chisel (cross) 70 798 02 130 150 1300 148
Blunt tool point 70 798 00 120 - 1200 148

Euroram / Globram RM 160

Moil point 70 799 01 130 - 1300 176

Flat chisel (cross) 70 799 02 130 160 1300 176
Blunt tool point 70 799 00 120 - 1200 176

Euroram / Globram RM 180

70 802 ... on request

V 12.03 36
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (F-) / Kent (KF-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa F 1 / Kent KF 1

Moil point 70 744 01 040 - 400 3

Flat chisel (cross) 70 744 02 040 40 400 3
Wide chisel (cross) 70 744 14 044 115 440 3,7
Asphalt cutter (parallel) 70 744 45 044 125 440 3,7
Forged plate incl. shank-end 70 744 95 038 200x200 380 13

Furukawa F 2 / Kent KF 2

Moil point 70 742 01 048 - 480 5

Flat chisel (cross) 70 742 02 048 45 480 5
Wide chisel (cross) 70 742 70 044 120 440 5
Asphalt cutter (parallel) 70 742 43 045 100 450 5
Forged plate incl. shank-end 70 742 95 045 200x200 450 16

Furukawa F 3 / Kent KF 3

Moil point 70 748 01 053 - 530 8,5

Flat chisel (cross) 70 748 02 053 55 530 8,5
Wide chisel (cross) 70 748 18 050 140 500 8,5
Asphalt cutter (parallel) 70 748 83 051 115 510 8,5
Forged plate incl. shank-end 70 748 95 050 200x200 500 19

Furukawa F 4 / Kent KF 4

Moil point 70 749 01 054 - 540 9

Flat chisel (cross) 70 749 02 054 60 540 9
Wide chisel (cross) 70 749 34 050 150 500 9
Asphalt cutter (parallel) 70 749 69 052 130 520 9
Forged plate incl. shank-end 70 749 95 050 200x200 500 20

Furukawa F 5 / Kent KF 5

Moil point 70 750 01 061 - 610 16,5

Flat chisel (cross) 70 750 02 061 70 610 16,5
Wide chisel (cross) 70 750 34 056 150 560 16,5
Asphalt cutter (parallel) 70 750 65 059 150 590 16,5
Forged plate incl. shank-end 70 750 95 069 200x200 690 27

37 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (F-) / Kent (KF-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa F 6 / Kent KF 6

Moil point 70 157 01 072 - 720 20

Flat chisel (cross) 70 157 02 072 75 720 20
Wide chisel (cross) 70 157 34 067 150 670 20
Asphalt cutter (parallel) 70 157 65 070 150 700 20
Forged plate incl. shank-end 70 157 95 067 200x200 670 30

Furukawa F 9 / Kent KF 9

Moil point 70 158 01 080 - 800 33

Flat chisel (cross) 70 158 02 080 90 800 33
Wide chisel (cross) 70 158 22 074 180 740 33
Asphalt cutter (parallel) 70 158 55 078 200 780 33

Furukawa F 12 / Kent KF 12

Moil point 70 159 01 105 - 1050 62

Flat chisel (cross) 70 159 02 105 105 1050 62

Furukawa F 19 / Kent KF 19

Moil point 70 160 01 110 - 1100 84

Flat chisel (cross) 70 160 02 110 120 1100 84
Blunt tool point 70 160 00 102 - 1020 84

Furukawa F 20 / F 22 / Kent KF 22

Moil point 70 161 01 120 - 1200 114

Flat chisel (cross) 70 161 02 120 135 1200 114
Blunt tool point 70 161 00 110 - 1100 114

Furukawa F 27 / Kent KF 27

Moil point 70 751 01 131 - 1310 134

Flat chisel (cross) 70 751 02 131 140 1310 134
Blunt tool point 70 751 00 121 - 1210 134

V 12.03 38
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (F-) / Kent (KF-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa F 30 / F 35 / Kent KF 35

Moil point 70 162 01 142 - 1420 170

Flat chisel (cross) 70 162 02 142 150 1420 170
Blunt tool point 70 162 00 132 - 1320 170

Furukawa F 45 / Kent KF 45

Moil point 70 163 01 145 - 1450 215

Flat chisel (cross) 70 163 02 145 170 1450 215
Blunt tool point 70 163 00 135 - 1350 215

Furukawa F 70 / Kent KF 70

70 164 ... on request

39 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (HB-) / Kent (KHB-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa HB 05R

70 747 ... on request

Furukawa HB 1 G / Kent KHB 1 G

Moil point 70 744 01 040 - 400 3

Flat chisel (cross) 70 744 02 040 40 400 3
Wide chisel (cross) 70 744 14 044 115 440 3,7
Asphalt cutter (parallel) 70 744 45 044 125 440 3,7
Forged plate incl. shank-end 70 744 95 038 200x200 380 13

Furukawa HB 2 G / Kent KHB 20 / KHB 2GII

Moil point 70 742 01 048 - 480 5

Flat chisel (cross) 70 742 02 048 45 480 5
Wide chisel (cross) 70 742 70 044 120 440 5
Asphalt cutter (parallel) 70 742 43 045 100 450 5
Forged plate incl. shank-end 70 742 95 045 200x200 450 16

Furukawa HB 2,5 G / HB 3 R

Moil point 70 748 01 053 - 530 8,5

Flat chisel (cross) 70 748 02 053 55 530 8,5
Wide chisel (cross) 70 748 18 050 140 500 8,5
Asphalt cutter (parallel) 70 748 83 051 115 510 8,5
Forged plate incl. shank-end 70 748 95 050 200x200 500 19

Furukawa HB 100

70 730 ... on request

V 12.03 40
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (HB-) / Kent (KHB-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa HB 3 G / Kent KHB 30 / KHB 3 GII

Moil point 70 749 01 054 - 540 9

Flat chisel (cross) 70 749 02 054 60 540 9
Wide chisel (cross) 70 749 34 050 150 500 9
Asphalt cutter (parallel) 70 749 69 052 130 520 9
Forged plate incl. shank-end 70 749 95 050 200x200 500 20

Furukawa HB 200

70 731 ... on request

Furukawa HB 5 G / Kent KHB 50 / KHB 5 GII

Moil point 70 743 01 072 - 720 21

Flat chisel (cross) 70 743 02 072 75 720 21
Wide chisel (cross) 70 743 34 067 150 670 21
Asphalt cutter (parallel) 70 743 65 070 150 700 21
Forged plate incl. shank-end 70 743 95 067 200x200 670 31

Furukawa HB 8 G / Kent KHB 80 / KHB 8 GII

Moil point 70 746 01 080 - 800 34

Flat chisel (cross) 70 746 02 080 90 800 34
Wide chisel (cross) 70 746 22 074 180 740 34
Asphalt cutter (parallel) 70 746 55 078 200 780 34

Furukawa HB 10 G / Kent KHB 100 / KHB 10 GII / KHB 10 GII-HD

Moil point 70 739 01 097 - 970 58

Flat chisel (cross) 70 739 02 097 105 970 58

Furukawa HB 700

70 734 ... on request

41 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Furukawa (HB-) / Kent (KHB-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Furukawa HB 15 G / Kent KHB 150 / KHB 15 GII

Moil point 70 737 01 100 - 1000 78

Flat chisel (cross) 70 737 02 100 120 1000 78
Blunt tool point 70 737 00 092 - 920 78

Furukawa HB 20 G / Kent KHB 200 / KHB 20 GII

Moil point 70 738 01 120 - 1200 118

Flat chisel (cross) 70 738 02 120 135 1200 118
Blunt tool point 70 738 00 110 - 1100 118

Furukawa HB 30 G / Kent KHB 300 / KHB 30 GII

Moil point 70 740 01 130 - 1300 157

Flat chisel (cross) 70 740 02 130 150 1300 157
Blunt tool point 70 740 00 120 - 1200 157

Furukawa HB 40 G / Kent KHB 400 / KHB 40 GII

Moil point 70 741 01 130 - 1300 181

Flat chisel (cross) 70 741 02 130 160 1300 181
Blunt tool point 70 741 00 120 - 1200 181

Furukawa HB 50 G / Kent KHB 500 / KHB 50 GII

70 736 ... on request

V 12.03 42
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Hanwoo
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Hanwoo RHB 302 V

Moil point 70 920 01 048 - 480 5,2

Flat chisel (cross) 70 920 02 048 45 480 5,2
Wide chisel (cross) 70 920 70 044 120 440 5,2
Asphalt cutter (parallel) 70 920 43 045 100 450 5,2
Forged plate incl. shank-end 70 920 95 045 200x200 450 16,5

Hanwoo RHB 303 V

Moil point 70 921 01 051 - 510 6,8

Flat chisel (cross) 70 921 02 051 50 510 6,8
Wide chisel (cross) 70 921 18 048 140 480 6,8
Asphalt cutter (parallel) 70 921 83 049 115 490 6,8
Forged plate incl. shank-end 70 921 95 048 200x200 480 18,5

Hanwoo RHB 304

Moil point 70 922 01 060 - 600 10,5

Flat chisel (cross) 70 922 02 060 58 600 10,5
Wide chisel (cross) 70 922 34 056 150 560 10,5
Asphalt cutter (parallel) 70 922 69 058 130 580 10,5
Forged plate incl. shank-end 70 922 95 056 200x200 560 22

Hanwoo RHB 305 V

Moil point 70 923 01 074 - 740 18,5

Flat chisel (cross) 70 923 02 074 70 740 18,5
Wide chisel (cross) 70 923 34 069 150 690 18,5
Asphalt cutter (parallel) 70 923 65 072 150 720 18,5
Forged plate incl. shank-end 70 923 95 069 200x200 690 30

Hanwoo RHB 306

Moil point 70 924 01 085 - 850 29,5

Flat chisel (cross) 70 924 02 085 80 850 29,5
Wide chisel (cross) 70 924 22 081 180 810 29,5

43 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Hanwoo
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Hanwoo RHB 308 V / 309

Moil point 70 925 01 089 - 890 34

Flat chisel (cross) 70 925 02 089 85 890 34

Hanwoo RHB 313 V

Moil point 70 926 01 105 - 1050 61,5

Flat chisel (cross) 70 926 02 105 105 1050 61,5

Hanwoo RHB 320

70 927 ... on request

Hanwoo RHB 322 V / 323 / 325

70 928 ... on request

Hanwoo RHB 328 / 330 / 332 V

70 929 ... on request

Hanwoo RHB 340

70 930 ... on request

V 12.03 44
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Indeco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Indeco MES 121 / 150

Moil point 70 804 01 050 - 500 5

Flat chisel (cross) 70 804 02 050 45 500 5
Wide chisel (cross) 70 804 70 046 120 460 5
Asphalt cutter (parallel) 70 804 43 047 100 470 5
Forged plate incl. shank-end 70 804 95 047 200x200 470 16

Indeco HP 200 / MES 180 / 181 / 200 / 250 / UP 181 / 200

Moil point 70 790 01 057 - 570 7,5

Flat chisel (cross) 70 790 02 057 50 570 7,5
Wide chisel (cross) 70 790 18 054 140 540 7,5
Asphalt cutter (parallel) 70 790 83 055 115 550 7,5
Forged plate incl. shank-end 70 790 95 054 200x200 540 17

Indeco HP 350 / MES 300 / 301 / 350 / 351 / UP 301 / 350 / 351

Moil point 70 791 01 060 - 600 10

Flat chisel (cross) 70 791 02 060 57 600 10
Wide chisel (cross) 70 791 18 056 140 560 10
Asphalt cutter (parallel) 70 791 83 057 115 570 10
Forged plate incl. shank-end 70 791 95 056 200x200 560 20

Indeco HB 5 / HP 500 / MES 450 / 451 / 521 / 550 / UP 462 / 521 / 550

Moil point 70 792 01 070 - 700 16

Flat chisel (cross) 70 792 02 070 65 700 16
Wide chisel (cross) 70 792 34 065 150 650 16
Asphalt cutter (parallel) 70 792 69 067 130 670 16
Forged plate incl. shank-end 70 792 95 065 200x200 650 25

Indeco HP 600 / MES 553 / UP 553

Moil point 70 806 01 072 - 720 20

Flat chisel (cross) 70 806 02 072 75 720 20
Wide chisel (cross) 70 806 34 067 150 670 20
Asphalt cutter (parallel) 70 806 65 070 150 700 20
Forged plate incl. shank-end 70 806 95 067 200x200 670 30

45 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Indeco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Indeco HB 8

Moil point 70 793 01 070 - 700 23

Flat chisel (cross) 70 793 02 070 80 700 23
Wide chisel (cross) 70 793 22 066 180 660 23
Asphalt cutter (parallel) 70 793 53 069 180 690 23

Indeco HP 700 / MES 601 / 621 / 650 / UP 601 / 621 / 650

Moil point 70 801 01 070 - 700 23

Flat chisel (cross) 70 801 02 070 80 700 23
Wide chisel (cross) 70 801 22 066 180 660 23
Asphalt cutter (parallel) 70 801 53 069 180 690 23

Indeco HP 900

Moil point 70 810 01 080 - 800 33

Flat chisel (cross) 70 810 02 080 90 800 33
Wide chisel (cross) 70 810 22 074 180 740 33
Asphalt cutter (parallel) 70 810 55 078 200 780 33

Indeco HB 12 / HP 1200 / MES 1050/1200 / UP 1200

Moil point 70 794 01 080 - 800 33

Flat chisel (cross) 70 794 02 080 90 800 33
Wide chisel (cross) 70 794 22 074 180 740 33
Asphalt cutter (parallel) 70 794 55 079 200 790 33

Indeco HB 19 / MES 1500

Moil point 70 795 01 100 - 1000 66

Flat chisel (cross) 70 795 02 100 114 1000 66

V 12.03 46
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Indeco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Indeco MES 1800 / MES 1750

Moil point 70 797 01 100 - 1000 70

Flat chisel (cross) 70 797 02 100 114 1000 70
Blunt tool point 70 797 00 092 - 920 70

Indeco HB 27 / MES 2000

Moil point 70 796 01 110 1100 84

Flat chisel (cross) 70 796 02 110 120 1100 84
Blunt tool point 70 796 00 102 - 1020 84

Indeco MES 2500

Moil point 70 800 01 113 - 1130 105

Flat chisel (cross) 70 800 02 113 130 1130 105
Blunt tool point 70 800 00 110 - 1100 109

Indeco MES 3000

Moil point 70 803 01 120 - 1200 127

Flat chisel (cross) 70 803 02 120 140 1200 127
Blunt tool point 70 803 00 110 - 1100 127

Indeco MES 3500

Moil point 70 798 01 130 - 1300 148

Flat chisel (cross) 70 798 02 130 150 1300 148
Blunt tool point 70 798 00 120 - 1200 148

Indeco MES 5000

Moil point 70 799 01 130 - 1300 176

Flat chisel (cross) 70 799 02 130 160 1300 176
Blunt tool point 70 799 00 120 - 1200 176

47 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Indeco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Indeco MES 7000

70 802 ... on request

Indeco MES 8500

70 807 ... on request

V 12.03 48
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Italdem
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Italdem GK 600 / 610

70 673 ... on request

Italdem GK 950 / 960

70 674 ... on request

Italdem GK 1050

70 675 ... on request

Italdem GK 1800

70 676 ... on request

49 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

JAB
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg
JAB JB 10

Moil point 70 681 01 060 - 600 9,5

Flat chisel (cross) 70 681 02 060 55 600 9,5
Wide chisel (cross) 70 681 18 057 140 570 9,5
Asphalt cutter (parallel) 70 681 83 058 115 580 9,5
Forged plate incl. shank-end 70 681 95 058 200x200 580 20

JAB JB 20

Moil point 70 300 01 074 - 740 18,5

Flat chisel (cross) 70 300 02 074 70 740 18,5
Wide chisel (cross) 70 300 34 069 150 690 18,5
Asphalt cutter (parallel) 70 300 65 072 150 720 18,5
Forged plate incl. shank-end 70 300 95 069 200x200 690 28

JAB JB 30

Moil point 70 183 01 072 - 720 21

Flat chisel (cross) 70 183 02 072 75 720 21
Wide chisel (cross) 70 183 34 067 150 670 21
Asphalt cutter (parallel) 70 183 65 070 150 700 21
Forged plate incl. shank-end 70 183 95 067 200x200 670 31

JAB JB 40

Moil point 70 683 01 080 - 800 31,5

Flat chisel (cross) 70 683 02 080 90 800 31,5
Wide chisel (cross) 70 683 22 074 180 740 31,5
Asphalt cutter (parallel) 70 683 55 078 200 780 31,5

JAB JB 60

Moil point 70 182 01 100 - 1000 52

Flat chisel (cross) 70 182 02 100 100 1000 52
Wide chisel (cross) 70 182 24 095 200 950 52
Blunt tool point 70 182 00 093 - 930 52

JAB JB 80

Moil point 70 181 01 120 - 1200 118

Flat chisel (cross) 70 181 02 120 135 1200 118
Blunt tool point 70 181 00 110 - 1100 118

V 12.03 50
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

JCB Hammermaster
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

JCB HM 65

Moil point 70 612 01 043 - 430 4

Flat chisel (cross) 70 612 02 043 40 430 4
Wide chisel (cross) 70 612 70 041 120 410 4
Asphalt cutter (parallel) 70 612 43 042 100 420 4
Forged plate incl. shank-end 70 612 95 042 200x200 420 15,5

JCB HM 100 / HM 100Q

Moil point 70 611 01 050 - 500 5,5

Flat chisel (cross) 70 611 02 050 45 500 5,5
Wide chisel (cross) 70 611 70 046 120 460 5,5
Asphalt cutter (parallel) 70 611 43 047 100 470 5,5
Forged plate incl. shank-end 70 611 95 047 200x200 470 16

JCB HM 160

Moil point 70 566 01 048 - 480 5,5

Moil point 70 566 01 058 - 580 6
Flat chisel (cross) 70 566 02 048 45 480 5,5
Wide chisel (cross) 70 566 70 044 120 440 5
Asphalt cutter (parallel) 70 566 43 045 100 450 5
Forged plate incl. shank-end 70 566 95 045 200x200 450 16

JCB HM 165 Q

Moil point 70 510 01 051 - 510 6,5

Moil point 70 510 01 075 - 750 10,5
Flat chisel (cross) 70 510 02 051 50 510 6,5
Wide chisel (cross) 70 510 16 048 125 480 6,5
Asphalt cutter (parallel) 70 510 83 049 115 490 6,5
Forged plate incl. shank-end 70 510 95 047 200x200 470 17

JCB HM 260

Moil point 70 565 01 070 - 700 15

Moil point 70 565 01 081 - 810 17,6
Flat chisel (cross) 70 565 02 070 65 700 15
Wide chisel (cross) 70 565 34 055 150 550 12,5
Asphalt cutter (parallel) 70 565 69 057 130 570 12,5
Forged plate incl. shank-end 70 565 95 065 200x200 650 25

51 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

JCB Hammermaster
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

JCB HM 265 Q

Moil point 70 509 01 060 - 600 13

Moil point 70 509 01 080 - 800 18,6
Flat chisel (cross) 70 509 02 060 65 600 13
Wide chisel (cross) 70 509 16 065 125 650 15,5
Forged plate incl. shank-end 70 509 95 055 200x200 550 23

JCB HM 360

Moil point 70 567 01 074 - 740 20

Flat chisel (cross) 70 567 02 074 70 740 20
Wide chisel (cross) 70 567 34 069 150 690 20
Asphalt cutter (parallel) 70 567 65 072 150 720 20
Forged plate incl. shank-end 70 567 95 069 200x200 690 28

JCB HM 385 Q

Moil point 70 514 01 080 - 800 28

Flat chisel (cross) 70 514 02 080 80 800 28
Wide chisel (cross) 70 514 20 077 160 770 28

JCB HM 495 Q

Moil point 70 511 01 084 - 840 40

Flat chisel (cross) 70 511 02 084 95 840 40

JCB HM 860 Q

Moil point 70 027 01 100 - 1000 56

Flat chisel (cross) 70 027 02 100 100 1000 56
Wide chisel (cross) 70 027 24 095 200 950 56
Blunt tool point 70 027 00 093 - 930 56

V 12.03 52
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

JCB Hammermaster
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

JCB HM 1260 Q

Moil point 70 017 01 106 - 1060 76

Moil point 70 017 01 140 - 1400 103
Flat chisel (cross) 70 017 02 106 115 1060 76
Blunt tool point 70 017 00 098 - 980 76

JCB HM 1560 Q

Moil point 70 018 01 110 - 1100 106

Percussion buster 70 018 90 120 - 1200 106
Flat chisel (cross) 70 018 02 110 135 1100 106
Blunt tool point 70 018 00 100 - 1000 106

JCB HM 1760 Q

Moil point 70 026 01 120 - 1200 128

Flat chisel (cross) 70 026 02 120 140 1200 128
Blunt tool point 70 026 00 110 - 1100 128

JCB HM 2460 Q

Moil point 70 030 01 130 - 1300 160

Flat chisel (cross) 70 030 02 130 150 1300 160
Blunt tool point 70 030 00 120 - 1200 160

JCB HM 3060 Q

Moil point 70 032 01 135 - 1350 197

Flat chisel (cross) 70 032 02 135 165 1350 197
Blunt tool point 70 032 00 125 - 1250 197

JCB HM 4160 Q

70 033 ... on request

53 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Komac / Dehaco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komac KB 100 / Dehaco DHB 100

Moil point 70 688 01 045 - 450 4

Flat chisel (cross) 70 688 02 045 40 450 4
Wide chisel (cross) 70 688 70 040 120 400 4
Asphalt cutter (parallel) 70 688 43 043 100 430 4
Forged plate incl. shank-end 70 688 95 042 200x200 420 15

Komac KB 150 / Dehaco DHB 150 S

Moil point 70 680 01 051 - 510 6,3

Flat chisel (cross) 70 680 02 051 50 510 6,3
Wide chisel (cross) 70 680 16 048 125 480 6,3
Asphalt cutter (parallel) 70 680 83 049 115 490 6,3
Forged plate incl. shank-end 70 680 95 048 200x200 480 17

Komac KB 200 / Dehaco DHB 200 S

Moil point 70 681 01 060 - 600 9,5

Flat chisel (cross) 70 681 02 060 55 600 9,5
Wide chisel (cross) 70 681 18 057 140 570 9,5
Asphalt cutter (parallel) 70 681 83 058 115 580 9,5
Forged plate incl. shank-end 70 681 95 058 200x200 580 20

Komac KB 250 / Dehaco DHB 250 S

Moil point 70 687 01 060 - 600 11

Flat chisel (cross) 70 687 02 060 58 600 11
Wide chisel (cross) 70 687 34 056 150 560 11
Asphalt cutter (parallel) 70 687 69 058 130 580 11
Forged plate incl. shank-end 70 687 95 056 200x200 560 22,5

Komac KB 300 / Dehaco DHB 300 S

Moil point 70 300 01 074 - 740 18,5

Flat chisel (cross) 70 300 02 074 70 740 18,5
Wide chisel (cross) 70 300 34 069 150 690 18,5
Asphalt cutter (parallel) 70 300 65 072 150 720 18,5
Forged plate incl. shank-end 70 300 95 069 200x200 690 28

V 12.03 54
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Komac / Dehaco
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komac KB 350 / Dehaco DHB 350 S

Moil point 70 682 01 082 - 820 24,5

Flat chisel (cross) 70 682 02 082 75 820 24,5
Wide chisel (cross) 70 682 34 075 150 750 24,5
Asphalt cutter (parallel) 70 682 65 078 150 780 24,5
Forged plate incl. shank-end 70 682 95 077 200x200 770 33

Komac KB 400 / Dehaco DHB 400 S

Moil point 70 683 01 080 - 800 31,5

Flat chisel (cross) 70 683 02 080 90 800 31,5
Wide chisel (cross) 70 683 22 074 180 740 31,5
Asphalt cutter (parallel) 70 683 55 078 200 780 31,5

Komac KB 1000 / Dehaco DHB 1000 S

Moil point 70 684 01 100 - 1000 52

Flat chisel (cross) 70 684 02 100 100 1000 52
Blunt tool point 70 684 00 093 - 930 52

Komac TOR 22 / TOR 23

70 690 ... on request

Komac TOR 36

70 691 ... on request

Komac KB 4200

70 692 ... on request

55 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

KOMATSU (JTHB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komatsu JTHB 08

Moil point 70 142 01 045 - 450 4

Flat chisel (cross) 70 142 02 045 40 450 4
Wide chisel (cross) 70 142 70 041 120 410 4
Asphalt cutter (parallel) 70 142 43 042 100 420 4
Forged plate incl. shank-end 70 142 95 045 200x200 450 14,5

Komatsu JTHB 10

Moil point 70 143 01 048 - 480 5

Flat chisel (cross) 70 143 02 048 45 480 5
Wide chisel (cross) 70 143 70 044 120 440 5
Asphalt cutter (parallel) 70 143 43 045 100 450 5
Forged plate incl. shank-end 70 143 95 045 200x200 450 15,5

Komatsu JTHB 20

Moil point 70 701 01 051 - 510 6,9

Flat chisel (cross) 70 701 02 051 50 510 6,9
Wide chisel (cross) 70 701 18 048 140 480 6,9
Asphalt cutter (parallel) 70 701 83 049 115 490 6,9
Forged plate incl. shank-end 70 701 95 048 200x200 480 17

Komatsu JTHB 30

Moil point 70 702 01 060 - 600 11

Flat chisel (cross) 70 702 02 060 58 600 11
Wide chisel (cross) 70 702 34 056 150 560 11
Asphalt cutter (parallel) 70 702 69 058 130 580 11
Forged plate incl. shank-end 70 702 95 056 200x200 560 21

Komatsu JTHB 40

Moil point 70 140 01 070 - 700 15

Flat chisel (cross) 70 140 02 070 65 700 15
Wide chisel (cross) 70 140 34 065 150 650 15
Asphalt cutter (parallel) 70 140 69 067 130 670 15
Forged plate incl. shank-end 70 140 95 065 200x200 650 24

V 12.03 56
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

KOMATSU (JTHB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komatsu JTHB 50

Moil point 70 704 01 072 - 720 21

Flat chisel (cross) 70 704 02 072 75 720 21
Wide chisel (cross) 70 704 34 067 150 670 21
Asphalt cutter (parallel) 70 704 65 070 150 700 21
Forged plate incl. shank-end 70 704 95 067 200x200 670 29

Komatsu JTHB 60 / 65

Moil point 70 703 01 084 - 840 39

Flat chisel (cross) 70 703 02 084 95 840 39

Komatsu JTHB 70

Moil point 70 705 01 094 - 940 65

Flat chisel (cross) 70 705 02 094 115 940 65
Blunt tool point 70 705 00 086 - 860 65

Komatsu JTHB 100

Moil point 70 144 01 105 - 1050 73,5

Flat chisel (cross) 70 144 02 105 115 1050 73,5
Blunt tool point 70 144 00 098 - 980 73,5

Komatsu JTHB 190

Moil point 70 145 01 120 - 1200 123

Flat chisel (cross) 70 145 02 120 140 1200 123
Blunt tool point 70 145 00 110 - 1100 123

Komatsu JTHB 230

Moil point 70 141 01 130 - 1300 145

Flat chisel (cross) 70 141 02 130 145 1300 145
Blunt tool point 70 141 00 120 - 1200 145

57 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

KOMATSU (JKHB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komatsu utility PC 09-1 / PC 03-2 ( FAI )

Moil point 70 910 01 060 - 600 5

Flat chisel (cross) 70 910 02 060 40 600 5
Wide chisel (cross) 70 910 70 055 120 550 5
Asphalt cutter (parallel) 70 910 43 058 100 580 5

Komatsu JKHB 51

Moil point 70 829 01 041 - 410 5

Flat chisel (cross) 70 829 02 041 45 410 5
Wide chisel (cross) 70 829 70 044 120 440 5
Asphalt cutter (parallel) 70 829 43 045 100 450 5
Forged plate incl. shank-end 70 829 95 038 200x200 380 15

Komatsu JKHB 71

Moil point 70 820 01 048 - 480 5

Flat chisel (cross) 70 820 02 048 45 480 5
Wide chisel (cross) 70 820 70 044 120 440 5
Asphalt cutter (parallel) 70 820 43 045 100 450 5
Forged plate incl. shank-end 70 820 95 045 200x200 450 15,5

Komatsu M 30

Moil point 70 892 01 053 - 530 8

Flat chisel (cross) 70 892 02 053 55 530 8
Wide chisel (cross) 70 892 18 050 140 500 8
Forged plate incl. shank-end 70 892 95 050 200x200 500 19

Komatsu JKHB 101

Moil point 70 826 01 058 - 580 9,5

Flat chisel (cross) 70 826 02 058 57 580 9,5
Wide chisel (cross) 70 826 18 055 140 550 9,5
Asphalt cutter (parallel) 70 826 83 056 115 560 9,5
Forged plate incl. shank-end 70 826 95 055 200x200 550 20

V 12.03 58
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

KOMATSU (JKHB-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Komatsu JKHB 301

Moil point 70 825 01 074 - 740 19

Flat chisel (cross) 70 825 02 074 70 740 19
Wide chisel (cross) 70 825 34 069 150 690 19
Asphalt cutter (parallel) 70 825 65 072 150 720 19
Forged plate incl. shank-end 70 825 95 069 200x200 690 29

Komatsu JKHB 401

Moil point 70 822 01 090 - 900 30

Flat chisel (cross) 70 822 02 090 80 900 30
Wide chisel (cross) 70 822 22 086 180 860 30

Komatsu JKHB 801

Moil point 70 824 01 100 - 1000 53

Flat chisel (cross) 70 824 02 100 100 1000 53

Komatsu JKHB 1500

Moil point 70 831 01 125 - 1250 127

Flat chisel (cross) 70 831 02 125 140 1250 127
Blunt tool point 70 831 00 117 - 1170 127

Komatsu JKHB 2000

Moil point 70 827 01 135 - 1350 162

Flat chisel (cross) 70 827 02 135 150 1350 162
Blunt tool point 70 827 00 125 - 1250 162

59 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 45

Moil point 70 020 01 047 - 470 5

Flat chisel (cross) 70 020 02 047 45 470 5
Wide chisel (cross) 70 020 70 043 120 430 5
Asphalt cutter (parallel) 70 020 43 044 100 440 5
Forged plate incl. shank-end 70 020 95 044 200x200 440 16

Krupp Baureihe HM 55 (HM 50) / HM 51

Moil point 70 013 01 056 - 560 6,5

Flat chisel (cross) 70 013 02 056 45 560 6,5
Wide chisel (cross) 70 013 70 052 120 520 6,5
Asphalt cutter (parallel) 70 013 43 053 100 530 6,5
Forged plate incl. shank-end 70 013 95 053 200x200 530 17

Krupp Baureihe HM 60 (ab Baujahr 1997) / HM 60 V

Moil point 70 023 01 051 - 510 6,5

Flat chisel (cross) 70 023 02 051 50 510 6,5
Wide chisel (cross) 70 023 18 048 140 480 6,5
Asphalt cutter (parallel) 70 023 83 049 115 490 6,5
Forged plate incl. shank-end 70 023 95 048 200x200 480 17

Krupp Baureihe HM 60 (vor 1997) / HM 61 / HM 75

Moil point 70 009 01 059 - 590 10

Flat chisel (cross) 70 009 02 059 55 590 10
Wide chisel (cross) 70 009 18 056 140 560 10
Asphalt cutter (parallel) 70 009 83 057 115 570 10

Krupp Baureihe HM 85 / HM 90 V

Moil point 70 021 01 060 - 600 12

Flat chisel (cross) 70 021 02 060 65 600 12
Wide chisel (cross) 70 021 34 055 150 550 12
Asphalt cutter (parallel) 70 021 69 057 130 570 12
Forged plate incl. shank-end 70 021 95 055 200x200 550 22

V 12.03 60
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 100 / HM 110

70 001 ... on request

Krupp Baureihe HM 130 / HM 131 / HM 135 / HM 140 V

Moil point 70 015 01 080 - 800 18

Flat chisel (cross) 70 015 02 080 65 800 18
Wide chisel (cross) 70 015 34 075 150 750 18
Asphalt cutter (parallel) 70 015 69 077 130 770 18
Forged plate incl. shank-end 70 015 95 075 200x200 750 27

Krupp Baureihe HM 170 / HM 185 / HM 190 V

Moil point 70 016 01 082 - 820 25

Flat chisel (cross) 70 016 02 082 75 820 25
Wide chisel (cross) 70 016 34 077 150 770 25
Asphalt cutter (parallel) 70 016 65 080 150 800 25
Forged plate incl. shank-end 70 016 95 077 200x200 770 35

Krupp Baureihe HM 200

Moil point 70 002 01 091 - 910 32

Flat chisel (cross) 70 002 02 091 80 910 32

Krupp Baureihe HM 220 / HM 230

Moil point 70 029 01 080 - 800 28,5

Flat chisel (cross) 70 029 02 080 80 800 28,5
Wide chisel (cross) 70 029 20 076 160 760 28,5
Asphalt cutter (parallel) 70 029 65 079 150 790 28,5

61 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 301 / HM 305 (HM 300)

Moil point 70 010 01 090 - 900 31

Flat chisel (cross) 70 010 02 090 80 900 31
Wide chisel (cross) 70 010 22 086 180 860 31
Asphalt cutter (parallel) 70 010 53 089 180 890 31

Krupp Baureihe HM 400 / HM 401 / HM 405

70 003 ... on request

Krupp Baureihe HM 350 V

Moil point 70 024 01 090 - 900 39

Flat chisel (cross) 70 024 02 090 90 900 39
Wide chisel (cross) 70 024 22 084 180 840 39
Asphalt cutter (parallel) 70 024 55 088 200 880 39

Krupp Baureihe HM 551/ 555 / 560 / 560 CS (HM550) / 560 V

Moil point 70 012 01 100 - 1000 53

Flat chisel (cross) 70 012 02 100 100 1000 53
Wide chisel (cross) 70 012 24 095 200 950 53
Asphalt cutter (parallel) 70 012 55 098 200 980 53
Blunt tool point 70 012 00 093 - 930 56

Krupp Baureihe HM 580

Moil point 70 027 01 100 - 1000 56

Flat chisel (cross) 70 027 02 100 100 1000 56
Wide chisel (cross) 70 027 24 095 200 950 56
Blunt tool point 70 027 00 093 - 930 56

V 12.03 62
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 600 / HM 601

Moil point 70 004 01 100 - 1000 57

Flat chisel (cross) 70 004 02 100 100 1000 57
Wide chisel (cross) 70 004 26 094 240 940 57

Krupp Baureihe HM 680

Moil point 70 034 01 110 - 1100 79

Flat chisel (cross) 70 034 02 110 120 1100 79
Blunt tool point 70 034 00 102 - 1020 79

Krupp Baureihe HM 720 CS (HM 710) / 711/715/720/720 V/712 / CP 1150

Moil point 70 017 01 106 - 1060 76

Moil point 70 017 01 140 - 1400 103
Flat chisel (cross) 70 017 02 106 115 1060 76
Blunt tool point 70 017 00 098 - 980 76

Krupp Baureihe HM 700 / 701 / 702 / 705 / 706

70 007 ... on request

Krupp Baureihe HM 780 V / Marathon

Moil point 70 028 01 110 - 1100 87

Flat chisel (cross) 70 028 02 110 120 1100 87
Blunt tool point 70 028 00 102 - 1020 87

Krupp Baureihe HM 800

70 005 ... on request

63 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 900 / 901 / 902

70 006 ... on request

Krupp Baureihe HM 960 CS (HM 950) / 960 V

Moil point 70 018 01 110 - 1100 106

Percussion buster 70 018 90 120 - 1200 106
Flat chisel (cross) 70 018 02 110 135 1100 106
Blunt tool point 70 018 00 100 - 1000 106

Krupp Baureihe HM 1000 V / Marathon

Moil point 70 026 01 120 - 1200 128

Flat chisel (cross) 70 026 02 120 140 1200 128
Blunt tool point 70 026 00 110 - 1100 128

Krupp Baureihe HM 1200 / 1201 / 1205

70 008 ... on request

Krupp Baureihe HM 1500 / 1500 CS / 1500 V / Marathon

Moil point 70 030 01 130 - 1300 160

Flat chisel (cross) 70 030 02 130 150 1300 160
Blunt tool point 70 030 00 120 - 1200 160

Krupp Baureihe HM 1800 / 2000 / V / Marathon

Moil point 70 014 01 130 - 1300 178

Flat chisel (cross) 70 014 02 130 160 1300 178

V 12.03 64
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Krupp
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Krupp Baureihe HM 2100 / 2300 / V / Marathon

Moil point 70 032 01 135 - 1350 197

Flat chisel (cross) 70 032 02 135 165 1350 197
Blunt tool point 70 032 00 125 - 1250 197

Krupp Baureihe HM 2200 / 2500 / 2600 / V / Marathon

70 033 ... on request

65 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Kubota
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Kubota KM 55

Moil point 70 500 01 042 - 420 4,1

Flat chisel (cross) 70 500 02 042 40 420 4,1
Wide chisel (cross) 70 500 70 037 120 370 4,1
Asphalt cutter (parallel) 70 500 43 040 100 400 4,1
Forged plate incl. shank-end 70 500 95 040 200x200 400 15,5

Kubota KXB 300N / KXB 350N

Moil point 70 573 01 041 - 410 3,5

Flat chisel (cross) 70 573 02 041 40 410 3,5
Wide chisel (cross) 70 573 70 037 120 370 3,5
Asphalt cutter (parallel) 70 573 43 038 100 380 3,5
Forged plate incl. shank-end 70 573 95 038 200x200 380 14,5

Kubota KM 100

Moil point 70 503 01 055 - 550 6,5

Flat chisel (cross) 70 503 02 055 45 550 6,5
Wide chisel (cross) 70 503 70 051 120 510 6,2
Asphalt cutter (parallel) 70 503 47 048 125 480 6,2
Forged plate incl. shank-end 70 503 95 052 200x200 520 16,5

Kubota KM 105

Moil point 70 502 01 045 - 450 4,9

Flat chisel (cross) 70 502 02 045 45 450 4,9
Wide chisel (cross) 70 502 70 041 120 410 4,9
Asphalt cutter (parallel) 70 502 43 042 100 420 4,9
Forged plate incl. shank-end 70 502 95 043 200x200 430 16,5

Kubota KXB 400N

Moil point 70 566 01 048 - 480 5,5

Moil point 70 566 01 058 - 580 6
Flat chisel (cross) 70 566 02 048 45 480 5,5
Wide chisel (cross) 70 566 70 044 120 440 5
Asphalt cutter (parallel) 70 566 43 045 100 450 5
Forged plate incl. shank-end 70 566 95 045 200x200 450 16

V 12.03 66
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Kubota
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Kubota KM 150 / 155

Moil point 70 510 01 051 - 510 6,5

Flat chisel (cross) 70 510 02 051 50 510 6,5
Wide chisel (cross) 70 510 16 048 125 480 6,5
Asphalt cutter (parallel) 70 510 83 049 115 490 6,5
Forged plate incl. shank-end 70 510 95 047 200x200 470 17

Kubota KXB 450N

Moil point 70 576 01 051 - 510 7

Moil point 70 576 01 075 - 750 10,5
Flat chisel (cross) 70 576 02 051 50 510 7
Wide chisel (cross) 70 576 18 048 140 480 6,5
Asphalt cutter (parallel) 70 576 83 049 115 490 6,5
Forged plate incl. shank-end 70 576 95 048 200x200 480 17

Kubota KXB 500N

Moil point 70 565 01 070 - 700 15

Moil point 70 565 01 081 - 810 17,6
Flat chisel (cross) 70 565 02 070 65 700 15
Wide chisel (cross) 70 565 34 055 150 550 12,5
Asphalt cutter (parallel) 70 565 69 057 130 570 12,5
Forged plate incl. shank-end 70 565 95 065 200x200 650 25

Kubota KM 200 / 205

Moil point 70 509 01 060 - 600 13

Moil point 70 509 01 080 - 800 18,6
Flat chisel (cross) 70 509 02 060 65 600 13
Wide chisel (cross) 70 509 16 065 125 650 15,5
Forged plate incl. shank-end 70 509 95 055 200x200 550 23

Kubota KXB 600N

Moil point 70 567 01 074 - 740 20

Flat chisel (cross) 70 567 02 074 70 740 20
Wide chisel (cross) 70 567 34 069 150 690 20
Asphalt cutter (parallel) 70 567 65 072 150 720 20
Forged plate incl. shank-end 70 567 95 069 200x200 690 28

67 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Kubota
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Kubota KM 300 / 305

Moil point 70 514 01 080 - 800 28

Flat chisel (cross) 70 514 02 080 80 800 28
Wide chisel (cross) 70 514 20 077 160 770 28

Kubota KM 450

Moil point 70 511 01 084 - 840 40

Flat chisel (cross) 70 511 02 084 95 840 40

V 12.03 68
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Lifton
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Lifton LH 60

Moil point 70 055 01 050 - 500 5

Flat chisel (cross) 70 055 02 050 45 500 5
Wide chisel (cross) 70 055 70 046 120 460 5
Asphalt cutter (parallel) 70 055 43 047 100 470 5
Forged plate incl. shank-end 70 055 95 047 200x200 470 16

Lifton LH 70 / LH 80

Moil point 70 460 01 050 - 500 5,6

Flat chisel (cross) 70 460 02 050 45 500 5,6
Wide chisel (cross) 70 460 70 047 120 470 5,6
Asphalt cutter (parallel) 70 460 43 047 100 470 5,6
Forged plate incl. shank-end 70 460 95 047 200x200 470 16

Lifton LH 100 / LH 110

Moil point 70 461 01 053 - 530 8,5

Flat chisel (cross) 70 461 02 053 55 530 8,5
Wide chisel (cross) 70 461 18 050 140 500 8,5
Asphalt cutter (parallel) 70 461 83 051 115 510 8,5
Forged plate incl. shank-end 70 461 95 050 200x200 500 19

Lifton LH 200

Moil point 70 467 01 060 - 600 13

Flat chisel (cross) 70 467 02 060 65 600 13
Wide chisel (cross) 70 467 34 055 150 550 13
Asphalt cutter (parallel) 70 467 69 057 130 570 13
Forged plate incl. shank-end 70 467 95 055 200x200 550 22

Lifton LH 300 / LH 170

Moil point 70 462 01 074 - 740 19

Flat chisel (cross) 70 462 02 074 70 740 19

Lifton LH 360

Moil point 70 463 01 078 - 780 29

Flat chisel (cross) 70 463 02 078 85 780 29

69 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Maruzen
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Maruzen MBB 50 / 60 / 70 / BH 711 / Dehaco DHB 501 / 601

Moil point 70 842 01 048 - 480 4,5

Flat chisel (cross) 70 842 02 048 45 480 4,5
Wide chisel (cross) 70 842 70 044 120 440 4,5
Asphalt cutter (parallel) 70 842 43 045 100 450 4,5
Forged plate incl. shank-end 70 842 95 045 200x200 450 16

Maruzen BH 801

Moil point 70 843 01 043 - 430 5,5

Flat chisel (cross) 70 843 02 043 50 430 5,5
Wide chisel (cross) 70 843 16 048 125 480 6,5
Forged plate incl. shank-end 70 843 95 040 200x200 400 16,4

V 12.03 70
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (BRP-,BRH-, M-) / Schaeff

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert BRP 30 / M 30

Moil point 70 068 01 041 - 410 3,5

Moil point 70 068 01 056 - 560 5,5
Flat chisel (cross) 70 068 02 041 45 410 3,5
Wide chisel (cross) 70 068 70 044 120 440 4,5
Asphalt cutter (parallel) 70 068 43 045 100 450 4,5
Forged plate incl. shank-end 70 068 95 038 200x200 380 14

Montabert BRH 40

Moil point 70 055 01 050 - 500 5

Moil point 70 055 01 070 - 700 7
Flat chisel (cross) 70 055 02 050 45 500 5
Wide chisel (cross) 70 055 70 046 120 460 5
Asphalt cutter (parallel) 70 055 43 047 100 470 5
Forged plate incl. shank-end 70 055 95 047 200x200 470 16

Montabert BRP 45 / 50 / M 50 / Schaeff SH 50

Moil point 70 065 01 043 - 430 5,5

Moil point 70 065 01 075 - 750 10,5
Flat chisel (cross) 70 065 02 043 50 430 5,5
Wide chisel (cross) 70 065 18 040 140 400 5,5
Asphalt cutter (parallel) 70 065 83 041 115 410 5,5
Forged plate incl. shank-end 70 065 95 040 200x200 400 16

Montabert BRP 70 / 60 / M 60 / M 70 / Schaeff SH 70

Moil point 70 064 01 051 - 510 6,5

Moil point 70 064 01 075 - 750 10
Flat chisel (cross) 70 064 02 051 50 510 6,5
Wide chisel (cross) 70 064 18 048 140 480 6,5
Asphalt cutter (parallel) 70 064 83 049 115 490 6,5
Forged plate incl. shank-end 70 064 95 048 200x200 480 17

71 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (BRP-,BRH-, M-) / Schaeff

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert BRH 75 / 76 / 90 / 91

Moil point 70 060 01 054 - 540 9

Flat chisel (cross) 70 060 02 054 60 540 9
Wide chisel (cross) 70 060 34 050 150 500 9
Asphalt cutter (parallel) 70 060 69 052 130 520 9
Forged plate incl. shank-end 70 060 95 050 200x200 500 20

Montabert BRP 85 / 95 / 100 / M 85 / M 95 / Schaeff SH 85 / 95

Moil point 70 070 01 060 - 600 12,5

Moil point 70 070 01 090 - 900 18
Flat chisel (cross) 70 070 02 060 65 600 12,5
Wide chisel (cross) 70 070 34 055 150 550 12,5
Asphalt cutter (parallel) 70 070 69 057 130 570 12,5
Forged plate incl. shank-end 70 070 95 055 200x200 550 23

Montabert M 125 SX

Moil point 70 075 01 072 - 720 22

Flat chisel (cross) 70 075 02 072 75 720 22
Wide chisel (cross) 70 075 34 067 150 670 22
Asphalt cutter (parallel) 70 075 65 070 150 700 22
Forged plate incl. shank-end 70 075 95 067 200x200 670 30,5

Montabert BRP 130 / 140 / 150 / M 130 / M 140 / M 150 / Schaeff SH 140

Moil point 70 069 01 072 - 720 21,5

Flat chisel (cross) 70 069 02 072 75 720 21,5
Wide chisel (cross) 70 069 34 067 150 670 21,5
Asphalt cutter (parallel) 70 069 65 070 150 700 21,5
Forged plate incl. shank-end 70 069 95 067 200x200 670 30

Montabert BRH 125

Moil point 70 051 01 070 - 700 21

Moil point 70 051 01 092 - 920 31
Flat chisel (cross) 70 051 02 070 80 700 21
Flat chisel (cross) 70 051 02 092 80 920 31
Wide chisel (cross) 70 051 22 066 180 660 21
Asphalt cutter (parallel) 70 051 53 069 180 690 21

V 12.03 72
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (BRH-, M-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert M 300

Moil point 70 074 01 085 - 850 40,5

Flat chisel (cross) 70 074 02 085 95 850 40,5
Wide chisel (cross) 70 074 24 080 200 800 40

Montabert BRH 270 / 250

Moil point 70 052 01 084 - 840 42

Moil point 70 052 01 120 - 1200 60
Flat chisel (cross) 70 052 02 084 95 840 42
Wide chisel (cross) 70 052 24 080 200 800 42
Asphalt cutter (parallel) 70 052 55 083 200 830 42

Montabert M 600

70 071 ... on request

Montabert M 700

Moil point 70 072 01 094 - 940 63

Flat chisel (cross) 70 072 02 094 114 940 63
Wide chisel (cross) 70 072 26 088 240 880 63

Montabert BRH 501 / 570

Moil point 70 053 01 100 - 1000 72

Moil point 70 053 01 130 - 1300 96
Flat chisel (cross) 70 053 02 100 114 1000 72
Wide chisel (cross) 70 053 26 094 240 940 72
Blunt tool point 70 053 00 092 - 920 72

Montabert BRH 620

Moil point 70 059 01 106 - 1060 76

Flat chisel (cross) 70 059 02 106 115 1060 76
Blunt tool point 70 059 00 098 - 980 76

73 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (BRH-, M-, V-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert BRH 625 / M 900

Moil point 70 062 01 100 - 1000 70

Moil point 70 062 01 130 - 1300 95
Flat chisel (cross) 70 062 02 100 118 1000 70
Blunt tool point 70 062 00 092 - 920 70

Montabert BRH 750

Moil point 70 058 01 110 - 1100 86

Flat chisel (cross) 70 058 02 110 120 1100 86
Blunt tool point 70 058 00 102 - 1020 86

Montabert BRV 32 / V 32 / V 1200

Moil point 70 061 01 110 - 1100 89

Moil point 70 061 01 130 - 1300 108
Flat chisel (cross) 70 061 02 110 122 1100 89
Blunt tool point 70 061 00 102 - 1020 89

Montabert V 1800

Moil point 70 084 01 127 - 1270 136

Flat chisel (cross) 70 084 02 127 140 1270 136
Blunt tool point 70 084 00 117 - 1170 136

Montabert BRV 43 / V 43

Moil point 70 066 01 130 - 1300 159

Flat chisel (cross) 70 066 02 130 150 1300 159
Blunt tool point 70 066 00 120 - 1200 159

Montabert BRV 52

Moil point 70 063 01 135 - 1350 192

V 12.03 74
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (V-, SC-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert V 2500

70 085 ... - - - on request

Montabert SC 6

Moil point 70 082 01 044 - 440 4,5

Flat chisel (cross) 70 082 02 044 40 440 4,5
Wide chisel (cross) 70 082 70 041 120 410 4,5

Montabert SC 8

Moil point 70 080 01 044 - 440 4,7

Flat chisel (cross) 70 080 02 044 42 440 4,7
Wide chisel (cross) 70 080 70 039 120 390 4,5
Asphalt cutter (parallel) 70 080 43 040 100 400 4,5
Forged plate incl. shank-end 70 080 95 041 200x200 410 16

Montabert SC 12

Moil point 70 076 01 046 - 460 5,5

Flat chisel (cross) 70 076 02 046 45 460 5,5
Wide chisel (cross) 70 076 18 043 140 430 5,65
Asphalt cutter (parallel) 70 076 83 044 115 440 5,65
Forged plate incl. shank-end 70 076 95 043 200x200 430 17

Montabert SC 16

Moil point 70 079 01 054 - 540 9,1

Flat chisel (cross) 70 079 02 054 54 540 9,1
Wide chisel (cross) 70 079 18 050 140 500 8,8
Asphalt cutter (parallel) 70 079 83 051 115 510 8,8
Forged plate incl. shank-end 70 079 95 051 200x200 510 20,5

75 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Montabert (SC-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Montabert SC 22

Moil point 70 077 01 060 - 600 13,5

Flat chisel (cross) 70 077 02 060 62 600 13,5
Wide chisel (cross) 70 077 34 054 150 540 13,1
Asphalt cutter (parallel) 70 077 69 056 130 560 13,1
Forged plate incl. shank-end 70 077 95 055 200x200 550 25

Montabert SC 28

Moil point 70 078 01 065 - 650 18,5

Flat chisel (cross) 70 078 02 065 69 650 18,5
Wide chisel (cross) 70 078 22 061 180 610 18,5
Asphalt cutter (parallel) 70 078 55 066 200 660 20
Forged plate incl. shank-end 70 078 95 060 200x200 600 30,5

Montabert SC 36

Moil point 70 081 01 070 - 700 22,5

Flat chisel (cross) 70 081 02 070 77 700 22,5
Wide chisel (cross) 70 081 34 065 150 650 22,5
Asphalt cutter (parallel) 70 081 63 068 160 680 22,5

Montabert SC 42

Moil point 70 083 01 079 - 790 31

Flat chisel (cross) 70 083 02 079 85 790 31
Wide chisel (cross) 70 083 22 074 180 740 31
Asphalt cutter (parallel) 70 083 53 077 180 770 31

Montabert SC 50

Moil point 70 074 01 085 - 850 40,5

Flat chisel (cross) 70 074 02 085 95 850 40,5
Wide chisel (cross) 70 074 24 080 200 800 40

V 12.03 76
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Neuson
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Neuson NE 6

Moil point 70 082 01 044 - 440 4,5

Flat chisel (cross) 70 082 02 044 40 440 4,5
Wide chisel (cross) 70 082 70 041 120 410 4,5

Neuson NE 8

Moil point 70 080 01 044 - 440 4,7

Flat chisel (cross) 70 080 02 044 42 440 4,7
Wide chisel (cross) 70 080 70 039 120 390 4,5
Asphalt cutter (parallel) 70 080 43 040 100 400 4,5
Forged plate incl. shank-end 70 080 95 041 200x200 410 16

Neuson NE 12

Moil point 70 076 01 046 - 460 5,5

Flat chisel (cross) 70 076 02 046 45 460 5,5
Wide chisel (cross) 70 076 18 043 140 430 5,65
Asphalt cutter (parallel) 70 076 83 044 115 440 5,65
Forged plate incl. shank-end 70 076 95 043 200x200 430 17

Neuson NE 16

Moil point 70 079 01 054 - 540 9,1

Flat chisel (cross) 70 079 02 054 54 540 9,1
Wide chisel (cross) 70 079 18 050 140 500 8,8
Asphalt cutter (parallel) 70 079 83 051 115 510 8,8
Forged plate incl. shank-end 70 079 95 051 200x200 510 20,5

Neuson NE 22

Moil point 70 077 01 060 - 600 13,5

Flat chisel (cross) 70 077 02 060 62 600 13,5
Wide chisel (cross) 70 077 34 054 150 540 13,1
Asphalt cutter (parallel) 70 077 69 056 130 560 13,1
Forged plate incl. shank-end 70 077 95 055 200x200 550 25

77 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Neuson
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Neuson NE 28

Moil point 70 078 01 065 - 650 18,5

Flat chisel (cross) 70 078 02 065 69 650 18,5
Wide chisel (cross) 70 078 22 061 180 610 18,5
Asphalt cutter (parallel) 70 078 55 066 200 660 20
Forged plate incl. shank-end 70 078 95 060 200x200 600 30,5

Neuson NE 36

Moil point 70 081 01 070 - 700 22,5

Flat chisel (cross) 70 081 02 070 77 700 22,5
Wide chisel (cross) 70 081 34 065 150 650 22,5
Asphalt cutter (parallel) 70 081 63 068 160 680 22,5

Neuson NE 50

Moil point 70 074 01 085 - 850 40,5

Flat chisel (cross) 70 074 02 085 95 850 40,5
Wide chisel (cross) 70 074 24 080 200 800 40

V 12.03 78
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (E-, GH-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK E-106

Moil point 70 254 01 041 - 410 4

Flat chisel (cross) 70 254 02 041 45 410 4
Wide chisel (cross) 70 254 70 037 120 370 4
Asphalt cutter (parallel) 70 254 43 038 100 380 4
Forged plate incl. shank-end 70 254 95 038 200x200 380 15

NPK E-200 / GH 06

Moil point 70 289 01 048 - 480 4,5

Flat chisel (cross) 70 289 02 048 45 480 4,5
Wide chisel (cross) 70 289 70 044 120 440 4,5
Asphalt cutter (parallel) 70 289 43 045 100 450 4,5
Forged plate incl. shank-end 70 289 95 045 200x200 450 15

NPK E-201 / GH 07

Moil point 70 283 01 051 - 510 6

Flat chisel (cross) 70 283 02 051 47 510 6
Wide chisel (cross) 70 283 16 047 125 470 6
Asphalt cutter (parallel) 70 283 83 048 115 480 6
Forged plate incl. shank-end 70 283 95 048 200x200 480 17

NPK E-202 / GH 1

Moil point 70 284 01 058 - 580 9,5

Flat chisel (cross) 70 284 02 058 57 580 9,5
Wide chisel (cross) 70 284 18 055 140 550 9,5
Asphalt cutter (parallel) 70 284 83 056 115 560 9,5
Forged plate incl. shank-end 70 284 95 055 200x200 550 20

NPK E-203 / GH 2

Moil point 70 285 01 074 - 740 18,5

Flat chisel (cross) 70 285 02 074 66 740 18,5
Wide chisel (cross) 70 285 34 069 150 690 18,5
Asphalt cutter (parallel) 70 285 65 072 150 720 18,5
Forged plate incl. shank-end 70 285 95 069 200x200 690 27

79 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (E-, GH-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK E-204 / GH 3

Moil point 70 286 01 080 - 800 25

Flat chisel (cross) 70 286 02 080 80 800 25
Wide chisel (cross) 70 286 34 075 150 750 25
Asphalt cutter (parallel) 70 286 63 078 160 780 25

NPK E-205 / GH 4

Moil point 70 287 01 089 - 890 36,5

Flat chisel (cross) 70 287 02 089 90 890 36,5

NPK E-206

Moil point 70 294 01 093 - 930 46

Flat chisel (cross) 70 294 02 093 96 930 46

NPK E-207 / GH 6

Moil point 70 293 01 105 - 1050 64

Flat chisel (cross) 70 293 02 105 106 1050 64

NPK E-208

Moil point 70 292 01 116 - 1160 85

Flat chisel (cross) 70 292 02 116 120 1160 85
Blunt tool point 70 292 00 108 - 1080 85

NPK E-210-A

Moil point 70 279 01 118 - 1180 101

Flat chisel (cross) 70 279 02 118 130 1180 101
Blunt tool point 70 279 00 110 - 1100 101

V 12.03 80
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (E-, GH-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK E-12-X / E-212

Moil point 70 274 01 110 - 1100 90

Flat chisel (cross) 70 274 02 110 130 1100 90
Blunt tool point 70 274 00 102 - 1020 90

NPK E-213 / E-213 A

Moil point 70 278 01 120 - 1200 115

Flat chisel (cross) 70 278 02 120 140 1200 115
Blunt tool point 70 278 00 110 - 1100 115

NPK GH 10

Moil point 70 295 01 120 - 1200 115

NPK E-15-X / E-215

70 275 ... on request

NPK E-18-X

70 276 ... on request

NPK E-218

70 291 ... on request

81 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (E-, GH-)

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK E-216

Moil point 70 290 01 130 - 1300 143

Flat chisel (cross) 70 290 02 130 150 1300 143
Blunt tool point 70 290 00 120 - 1200 143

NPK E-224 / E-24-X

70 277 ... on request

NPK E-220

Moil point 70 288 01 140 - 1400 181

Flat chisel (cross) 70 288 02 140 160 1400 181
Blunt tool point 70 288 00 130 - 1300 181

NPK GH 15

70 296 ... on request

NPK E-225

70 280 ... on request

NPK GH 18

70 297 ... on request

V 12.03 82
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (H-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK H-06-X

Moil point 70 271 01 048 - 480 4,5

Flat chisel (cross) 70 271 02 048 45 480 4,5
Wide chisel (cross) 70 271 70 044 120 440 4,5
Asphalt cutter (parallel) 70 271 43 045 100 450 4,5
Forged plate incl. shank-end 70 271 95 045 200x200 450 15

NPK H-08-X / Gehl YC 70

Moil point 70 252 01 048 - 480 5

Flat chisel (cross) 70 252 02 048 45 480 5
Wide chisel (cross) 70 252 70 044 120 440 5
Asphalt cutter (parallel) 70 252 43 045 100 450 5
Forged plate incl. shank-end 70 252 95 045 200x200 450 16

NPK H-1-XA

Moil point 70 255 01 058 - 580 10

Flat chisel (cross) 70 255 02 058 60 580 10
Wide chisel (cross) 70 255 18 055 140 550 10
Asphalt cutter (parallel) 70 255 83 056 115 560 10
Forged plate incl. shank-end 70 255 95 055 200x200 550 20

NPK H-2-XA / XE

Moil point 70 268 01 060 - 600 13

Flat chisel (cross) 70 268 02 060 65 600 13
Wide chisel (cross) 70 268 34 055 150 550 13
Asphalt cutter (parallel) 70 268 69 057 130 570 13
Forged plate incl. shank-end 70 268 95 055 200x200 550 22

83 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (H-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK H-3-XA/XE / H-2-X

Moil point 70 257 01 072 - 720 21

Flat chisel (cross) 70 257 02 072 75 720 21
Wide chisel (cross) 70 257 34 067 150 670 21
Asphalt cutter (parallel) 70 257 65 070 150 700 21
Forged plate incl. shank-end 70 257 95 067 200x200 670 30

NPK H-4-X / XE

Moil point 70 259 01 080 - 800 33

Flat chisel (cross) 70 259 02 080 90 800 33
Wide chisel (cross) 70 259 22 074 180 740 33
Asphalt cutter (parallel) 70 259 55 078 200 780 33

NPK H-5-X / 6-X

70 260 ... on request

NPK H-7-X

Moil point 70 261 01 093 - 930 57

Flat chisel (cross) 70 261 02 093 105 930 57

NPK H-8-X

70 262 ... on request

NPK H-8-XA

Moil point 70 269 01 100 - 1000 72

Flat chisel (cross) 70 269 02 100 120 1000 72
Blunt tool point 70 269 00 092 - 920 72

V 12.03 84
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

NPK (H-)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

NPK H-10-X

70 256 ... on request

NPK H-10-XB / H-10-XE

Moil point 70 270 01 110 - 1100 94

Flat chisel (cross) 70 270 02 110 130 1100 94
Blunt tool point 70 270 00 102 - 1020 94

NPK H-12-X / H-12-XE

Moil point 70 265 01 120 - 1200 115

Flat chisel (cross) 70 265 02 120 140 1200 115
Blunt tool point 70 265 00 110 - 1100 115

NPK H-16-X / H-16-XE

Moil point 70 266 01 130 - 1300 143

Flat chisel (cross) 70 266 02 130 150 1300 143
Blunt tool point 70 266 00 120 - 1200 143

85 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Okada
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Okada OKB 302 A

70 769 ... on request

Moil point and Tamping tool also suitable for TOP 35

Okada TOP 35

70 766 ... on request

Moil point and Tamping tool also suitable for OKB 302 A

Okada OKB 303

Moil point 70 765 01 074 - 740 17,5

Okada OKB 305 / TOP 60B

70 768 ... on request

Okada OKB 312 B

70 770 ... on request

Okada OKB 316

70 771 ... on request

V 12.03 86
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Promove
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Promove XP 100

70 481 ... on request

Promove XP 150

70 482 ... on request

Promove XP 250

70 483 ... on request

Promove XP 450

70 484 ... on request

Promove XP 550

70 485 ... on request

Promove XP 800

70 486 ... on request

87 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rammer (S-) / Sandvik / O&K

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rammer Piccolo / S18

Moil point 70 573 01 041 - 410 3,5

Flat chisel (cross) 70 573 02 041 40 410 3,5
Wide chisel (cross) 70 573 70 037 120 370 3,5
Asphalt cutter (parallel) 70 573 43 038 100 380 3,5
Forged plate incl. shank-end 70 573 95 038 200x200 380 14,5

Rammer S21 / Sandvik BR321 / Bobcat 1750 / O&K H32

Moil point 70 566 01 048 - 480 5,5

Moil point 70 566 01 058 - 580 6
Flat chisel (cross) 70 566 02 048 45 480 5,5
Wide chisel (cross) 70 566 70 044 120 440 5
Asphalt cutter (parallel) 70 566 43 045 100 450 5
Forged plate incl. shank-end 70 566 95 045 200x200 450 16

Rammer S22 / Sandvik BR422 / O&K H45

Moil point 70 576 01 051 - 510 7

Moil point 70 576 01 075 - 750 10,5
Flat chisel (cross) 70 576 02 051 50 510 7
Wide chisel (cross) 70 576 18 048 140 480 6,5
Asphalt cutter (parallel) 70 576 83 049 115 490 6,5
Forged plate incl. shank-end 70 576 95 048 200x200 480 17

Rammer S20

Moil point 70 452 01 053 - 530 7,5

Flat chisel (cross) 70 452 02 053 55 530 7,5
Wide chisel (cross) 70 452 18 050 140 500 7,5
Asphalt cutter (parallel) 70 452 83 051 115 510 7,5
Forged plate incl. shank-end 70 452 95 050 200x200 500 18

V 12.03 88
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rammer (S-) / Sandvik / O&K

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rammer S23 / S23N / Sandvik BR623 / O&K H65

Moil point 70 565 01 070 - 700 15

Moil point 70 565 01 081 - 810 17,6
Flat chisel (cross) 70 565 02 070 65 700 15
Wide chisel (cross) 70 565 34 055 150 550 12,5
Asphalt cutter (parallel) 70 565 69 057 130 570 12,5
Forged plate incl. shank-end 70 565 95 065 200x200 650 25

Rammer S25 / Sandvik BR825 / O&K H85

Moil point 70 567 01 074 - 740 20

Flat chisel (cross) 70 567 02 074 70 740 20
Wide chisel (cross) 70 567 34 069 150 690 20
Asphalt cutter (parallel) 70 567 65 072 150 720 20
Forged plate incl. shank-end 70 567 95 069 200x200 690 28

Rammer S24

70 453 ... on request

Rammer S27 / Sandvik BR927 / O&K H120

Moil point 70 577 01 084 - 840 35,5

Flat chisel (cross) 70 577 02 084 90 840 35,5
Wide chisel (cross) 70 577 22 084 180 840 38
Asphalt cutter (parallel) 70 577 55 088 200 880 38

Rammer S26 / S26N

Moil point 70 454 01 089 - 890 38

Flat chisel (cross) 70 454 02 089 90 890 38
Wide chisel (cross) 70 454 22 084 180 840 38
Asphalt cutter (parallel) 70 454 53 087 180 870 38

89 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rammer (S-) / Sandvik / O&K

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rammer S29 / Sandvik BR1229

/ O&K H150

Moil point 70 574 01 090 - 900 45

Moil point 70 574 01 100 - 1000 50
Flat chisel (cross) 70 574 02 090 95 900 45
Wide chisel (cross) 70 574 24 080 200 800 42
Asphalt cutter (parallel) 70 574 55 083 200 830 42

Rammer S52

Moil point 70 455 01 090 - 900 57

Flat chisel (cross) 70 455 02 090 115 900 57
Wide chisel (cross) 70 455 26 084 240 840 57

Rammer S54

Moil point 70 560 01 106 - 1060 78

Flat chisel (cross) 70 560 02 106 115 1060 78
Blunt tool point 70 560 00 098 - 980 78

Rammer S56

Moil point 70 561 01 110 - 1100 102

Flat chisel (cross) 70 561 02 110 130 1100 102
Blunt tool point 70 561 00 102 - 1020 102

Rammer S82

70 564 ... on request

Rammer S83

Moil point 70 568 01 120 - 1200 128

Flat chisel (cross) 70 568 02 120 140 1200 128
Blunt tool point 70 568 00 110 - 1100 128

Rammer S84

Moil point 70 563 01 130 - 1300 183

Flat chisel (cross) 70 563 02 130 160 1300 183
Blunt tool point 70 563 00 120 - 1200 183

V 12.03 90
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rammer (S-,E-) / Sandvik / O&K

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rammer S86

70 562 ... on request

Rammer E64 / Sandvik BR2064 / O&K H200S

Moil point 70 569 01 105 - 1050 65

Flat chisel (cross) 70 569 02 105 106 1050 65
Blunt tool point 70 569 00 098 - 980 65

Rammer E63

Moil point 70 586 01 100 - 1000 70

Flat chisel (cross) 70 586 02 100 115 1000 70
Blunt tool point 70 586 00 098 - 980 78

Rammer E66 / E66N / S55 / Sandvik BR2266 / O&K H260S

Moil point 70 578 01 106 - 1060 77

Flat chisel (cross) 70 578 02 106 115 1060 77
Blunt tool point 70 578 00 098 - 980 77

Rammer E65 / Sandvik BR2265

Moil point 70 594 01 110 - 1100 92,5

Flat chisel (cross) 70 594 02 110 125 1100 92,5
Blunt tool point 70 594 00 102 - 1020 92,5

Rammer E68 / Sandvik BR2568 / O&K H310S

Moil point 70 571 01 110 - 1100 101

Flat chisel (cross) 70 571 02 110 130 1100 101
Blunt tool point 70 571 00 102 - 1020 101

91 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rammer (M-, G-) / Sandvik / O&K

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rammer M14

Moil point 70 595 01 110 - 1100 96,5

Flat chisel (cross) 70 595 02 110 125 1100 96,5
Blunt tool point 70 595 00 102 - 1020 96,5

Rammer M18

Moil point 70 591 01 120 - 1200 128

Flat chisel (cross) 70 591 02 120 140 1200 128
Blunt tool point 70 591 00 110 - 1100 128

Rammer G80 / O&K H380S

Moil point 70 575 01 120 - 1200 129

Flat chisel (cross) 70 575 02 120 140 1200 129
Blunt tool point 70 575 00 110 - 1100 129

Rammer G90 / Sandvik BR3890 / O&K H530S

Moil point 70 580 01 140 - 1400 198

Flat chisel (cross) 70 580 02 140 160 1400 198
Blunt tool point 70 580 00 125 - 1250 192

Rammer G100 / Sandvik BR4510

Moil point 70 572 01 145 - 1450 232

Flat chisel (cross) 70 572 02 145 170 1450 232
Blunt tool point 70 572 00 135 - 1350 232

Rammer G110 / Sandvik BR4511 / O&K H700S

Moil point 70 583 01 145 - 1450 247

Flat chisel (cross) 70 583 02 145 175 1450 247
Blunt tool point 70 583 00 135 - 1350 247

V 12.03 92
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rotair / Gehl / Volvo

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rotair OLS 50 / Gehl G 50 S

Moil point 70 744 01 040 - 400 3

Flat chisel (cross) 70 744 02 040 40 400 3
Wide chisel (cross) 70 744 14 044 115 440 3,7
Asphalt cutter (parallel) 70 744 45 044 125 440 3,7
Forged plate incl. shank-end 70 744 95 038 200x200 380 13

Rotair OL 90 / Volvo MH 90

Moil point 70 890 01 048 - 480 6,5

Flat chisel (cross) 70 890 02 048 48 480 6,5
Wide chisel (cross) 70 890 18 045 140 450 6,5
Asphalt cutter (parallel) 70 890 83 046 115 460 6,5
Forged plate incl. shank-end 70 890 95 045 200x200 450 17

Rotair OLS 95 / Volvo MH 95

Moil point 70 894 01 051 - 510 7

Flat chisel (cross) 70 894 02 051 48 510 7
Wide chisel (cross) 70 894 18 048 140 480 7
Asphalt cutter (parallel) 70 894 83 049 115 490 7
Forged plate incl. shank-end 70 894 95 047 200x200 470 17

Rotair OL 130 / OLS 160 / Gehl G 160 S / Volvo MH 160

Moil point 70 892 01 053 - 530 8

Flat chisel (cross) 70 892 02 053 55 530 8
Wide chisel (cross) 70 892 18 050 140 500 8
Forged plate incl. shank-end 70 892 95 050 200x200 500 19

Rotair OL 180 / OLS 260 / Gehl G 260 S / Volvo MH 260

Moil point 70 891 01 074 - 740 19

Flat chisel (cross) 70 891 02 074 70 740 19
Wide chisel (cross) 70 891 34 069 150 690 19
Forged plate incl. shank-end 70 891 95 069 200x200 690 30

93 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Rotair / Gehl / Volvo

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Rotair OL 250 / OLS 330 / Gehl G 330 S / Volvo MH 330

Moil point 70 893 01 070 - 700 23,5

Flat chisel (cross) 70 893 02 070 80 700 23,5

Rotair OLS 450 / OLS 550 / Gehl G 450 S

Moil point 70 895 01 072 - 720 26

Flat chisel (cross) 70 895 02 072 81 720 26

V 12.03 94
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Socomec
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Socomec DMS 50

Moil point 70 330 01 048 - 480 5

Flat chisel (cross) 70 330 02 048 45 480 5
Wide chisel (cross) 70 330 70 044 120 440 5
Asphalt cutter (parallel) 70 330 43 045 100 450 5
Forged plate incl. shank-end 70 330 95 045 200x200 450 16

Socomec DMS 95

Moil point 70 322 01 052 - 520 5

Flat chisel (cross) 70 322 02 052 45 520 5
Wide chisel (cross) 70 322 70 048 120 480 5
Asphalt cutter (parallel) 70 322 43 049 100 490 5
Forged plate incl. shank-end 70 322 95 049 200x200 490 16

Socomec DMS 160

Moil point 70 328 01 053 - 530 9

Flat chisel (cross) 70 328 02 053 55 530 9
Wide chisel (cross) 70 328 18 050 140 500 9
Asphalt cutter (parallel) 70 328 83 051 115 510 9
Forged plate incl. shank-end 70 328 95 050 200x200 500 19

Socomec DMS 210

Moil point 70 335 01 060 - 600 12,7

Flat chisel (cross) 70 335 02 060 62 600 12,7
Wide chisel (cross) 70 335 34 055 150 550 12,7
Asphalt cutter (parallel) 70 335 69 057 130 570 12,7
Forged plate incl. shank-end 70 335 95 055 200x200 550 22,5

Socomec DMS 220

70 331 ... on request

Socomec DMS 270

Moil point 70 327 01 074 - 740 19,5

Flat chisel (cross) 70 327 02 074 70 740 19,5
Wide chisel (cross) 70 327 34 069 150 690 19,5
Asphalt cutter (parallel) 70 327 65 072 150 720 19,5
Forged plate incl. shank-end 70 327 95 069 200x200 690 29

95 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Socomec
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Socomec DMS 310 / 330 / MDO 250 / 260

Moil point 70 321 01 072 - 720 21

Flat chisel (cross) 70 321 02 072 80 720 21
Wide chisel (cross) 70 321 34 067 150 670 21
Asphalt cutter (parallel) 70 321 65 070 150 700 21

Socomec MDO 550

70 329 ... on request

Socomec DMS 680

70 333 ... on request

Socomec MDO 750

70 324 ... on request

Socomec MDO 900

70 326 ... on request

Socomec MDO 1450

70 320 ... on request

Socomec MDO 1950

70 325 ... on request

V 12.03 96
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Soosan
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Soosan SB 10

Moil point 70 304 01 042 - 420 3,5

Flat chisel (cross) 70 304 02 042 40 420 3,5
Wide chisel (cross) 70 304 70 042 120 420 3,9
Forged plate incl. shank-end 70 304 95 040 200x200 400 14

Soosan SB 20 / SB 20 II

Moil point 70 307 01 048 - 480 5,2

Flat chisel (cross) 70 307 02 048 45 480 5,2
Wide chisel (cross) 70 307 70 044 120 440 5,2
Asphalt cutter (parallel) 70 307 43 045 100 450 5,2
Forged plate incl. shank-end 70 307 95 045 200x200 450 16

Soosan SB 30 / SB 30 II

Moil point 70 306 01 055 - 550 8,5

Flat chisel (cross) 70 306 02 055 53 550 8,5
Wide chisel (cross) 70 306 18 052 140 520 8,5
Asphalt cutter (parallel) 70 306 83 053 115 530 8,5
Forged plate incl. shank-end 70 306 95 052 200x200 520 20

Soosan SB 35 / SB 35 II

Moil point 70 689 01 060 - 600 12

Flat chisel (cross) 70 689 02 060 60 600 12
Wide chisel (cross) 70 689 34 055 150 550 12
Asphalt cutter (parallel) 70 689 69 057 130 570 12
Forged plate incl. shank-end 70 689 95 055 200x200 550 23

Soosan SB 40 / SB 40 II

Moil point 70 686 01 074 - 740 18,5

Flat chisel (cross) 70 686 02 074 70 740 18,5
Wide chisel (cross) 70 686 34 069 150 690 18,5
Asphalt cutter (parallel) 70 686 65 072 150 720 18,5
Forged plate incl. shank-end 70 686 95 069 200x200 690 30

97 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Soosan
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Soosan SB 4

Moil point 70 300 01 074 - 740 18,5

Flat chisel (cross) 70 300 02 074 70 740 18,5
Wide chisel (cross) 70 300 34 069 150 690 18,5
Asphalt cutter (parallel) 70 300 65 072 150 720 18,5
Forged plate incl. shank-end 70 300 95 069 200x200 690 28

Soosan SB 50

Moil point 70 684 01 100 - 1000 52

Flat chisel (cross) 70 684 02 100 100 1000 52
Blunt tool point 70 684 00 093 - 930 52

Soosan SB 60

Moil point 70 301 01 115 - 1150 98

Flat chisel (cross) 70 301 02 115 125 1150 98
Blunt tool point 70 301 00 107 - 1070 98

Soosan SB 81

Moil point 70 302 01 127 - 1270 131

Flat chisel (cross) 70 302 02 127 140 1270 131
Blunt tool point 70 302 00 117 - 1170 131

Soosan SB 121

Moil point 70 303 01 145 - 1450 190

Flat chisel (cross) 70 303 02 145 155 1450 190
Blunt tool point 70 303 00 135 - 1350 190

V 12.03 98
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Stanley / Bobcat
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Stanley MB 105

70 854 ... on request

Stanley MB 125 / Bobcat 1250

Moil point 70 850 01 048 - 480 5

Flat chisel (cross) 70 850 02 048 45 480 5
Wide chisel (cross) 70 850 70 044 120 440 5
Asphalt cutter (parallel) 70 850 43 045 100 450 5
Forged plate incl. shank-end 70 850 95 045 200x200 450 15

Stanley MB 156 / Bobcat 1560

Moil point 70 856 01 048 - 480 5

Flat chisel (cross) 70 856 02 048 45 480 5
Wide chisel (cross) 70 856 70 044 120 440 5
Asphalt cutter (parallel) 70 856 43 045 100 450 5
Forged plate incl. shank-end 70 856 95 045 200x200 450 15

Stanley MB 250, MB 350 / Bobcat 2500, 3500

Moil point 70 851 01 060 - 600 13

Flat chisel (cross) 70 851 02 060 65 600 13
Wide chisel (cross) 70 851 34 055 150 550 13
Asphalt cutter (parallel) 70 851 69 057 130 570 13
Forged plate incl. shank-end 70 851 95 055 200x200 550 23

Stanley MB 506 / Bobcat 5060

Moil point 70 857 01 074 - 740 19

Flat chisel (cross) 70 857 02 074 70 740 19
Wide chisel (cross) 70 857 34 069 150 690 19
Asphalt cutter (parallel) 70 857 65 072 150 720 19
Forged plate incl. shank-end 70 857 95 069 200x200 690 29

99 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Stanley / Bobcat
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Stanley MB 550 / Bobcat 5500

70 852 ... on request

Stanley MB 656 / Bobcat 6560

70 858 ... on request

Stanley MB 800

70 853 ... on request

Stanley MB 15 EX / MB 20 EX

Moil point 70 683 01 080 - 800 31,5

Flat chisel (cross) 70 683 02 080 90 800 31,5
Wide chisel (cross) 70 683 22 074 180 740 31,5
Asphalt cutter (parallel) 70 683 55 078 200 780 31,5

Stanley MB 30 EX

Moil point 70 684 01 100 - 1000 52

Flat chisel (cross) 70 684 02 100 100 1000 52
Blunt tool point 70 684 00 093 - 930 52

Stanley MB 40 EX

Moil point 70 301 01 115 - 1150 98

Flat chisel (cross) 70 301 02 115 125 1150 98
Blunt tool point 70 301 00 107 - 1070 98

V 12.03 100
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Stanley
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Stanley MB 50 EX

Moil point 70 302 01 127 - 1270 131

Flat chisel (cross) 70 302 02 127 140 1270 131
Blunt tool point 70 302 00 117 - 1170 131

Stanley MB 70 EX

Moil point 70 303 01 145 - 1450 190

Flat chisel (cross) 70 303 02 145 155 1450 190
Blunt tool point 70 303 00 135 - 1350 190

101 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Toku
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Toku TNB 08 M

Moil point 70 142 01 045 - 450 4

Flat chisel (cross) 70 142 02 045 40 450 4
Wide chisel (cross) 70 142 70 041 120 410 4
Asphalt cutter (parallel) 70 142 43 042 100 420 4
Forged plate incl. shank-end 70 142 95 045 200x200 450 14,5

Toku TNB 1 M

Moil point 70 143 01 048 - 480 5

Flat chisel (cross) 70 143 02 048 45 480 5
Wide chisel (cross) 70 143 70 044 120 440 5
Asphalt cutter (parallel) 70 143 43 045 100 450 5
Forged plate incl. shank-end 70 143 95 045 200x200 450 15,5

Toku TNB 1 E / TNB 2 M

Moil point 70 701 01 051 - 510 6,9

Flat chisel (cross) 70 701 02 051 50 510 6,9
Wide chisel (cross) 70 701 18 048 140 480 6,9
Asphalt cutter (parallel) 70 701 83 049 115 490 6,9
Forged plate incl. shank-end 70 701 95 048 200x200 480 17

Toku TNB 2 E / TNB 3 M

Moil point 70 702 01 060 - 600 11

Flat chisel (cross) 70 702 02 060 58 600 11
Wide chisel (cross) 70 702 34 056 150 560 11
Asphalt cutter (parallel) 70 702 69 058 130 580 11
Forged plate incl. shank-end 70 702 95 056 200x200 560 21

Toku TNB 3 E

Moil point 70 140 01 070 - 700 15

Flat chisel (cross) 70 140 02 070 65 700 15
Wide chisel (cross) 70 140 34 065 150 650 15
Asphalt cutter (parallel) 70 140 69 067 130 670 15
Forged plate incl. shank-end 70 140 95 065 200x200 650 24

V 12.03 102
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Toku
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg
Toku TNB 4 E / 5 M

Moil point 70 704 01 072 - 720 21

Flat chisel (cross) 70 704 02 072 75 720 21
Wide chisel (cross) 70 704 34 067 150 670 21
Asphalt cutter (parallel) 70 704 65 070 150 700 21
Forged plate incl. shank-end 70 704 95 067 200x200 670 29

Toku TNB 5 E / 6 E / 6,5 E

Moil point 70 703 01 084 - 840 39

Flat chisel (cross) 70 703 02 084 95 840 39

Toku TNB 7E / 8E / 10E

Moil point 70 705 01 094 - 940 65

Flat chisel (cross) 70 705 02 094 115 940 65
Blunt tool point 70 705 00 086 - 860 65

Toku TNB 100

Moil point 70 144 01 105 - 1050 73,5

Flat chisel (cross) 70 144 02 105 115 1050 73,5
Blunt tool point 70 144 00 098 - 980 73,5

Toku TNB 14 E / 16 E

Moil point 70 707 01 120 - 1200 112

Flat chisel (cross) 70 707 02 120 135 1200 112
Blunt tool point 70 707 00 110 - 1100 112

Toku TNB 190

Moil point 70 145 01 120 - 1200 123

Flat chisel (cross) 70 145 02 120 140 1200 123
Blunt tool point 70 145 00 110 - 1100 123

Toku TNB 22 E / 23 E

Moil point 70 708 01 130 - 1300 145

Flat chisel (cross) 70 708 02 130 145 1300 145

103 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Toyo / Takeuchi / Dehaco

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Toyo THBB 51 / Takeuchi TKB-51 / Dehaco DHB 55

Moil point 70 829 01 041 - 410 5

Flat chisel (cross) 70 829 02 041 45 410 5
Wide chisel (cross) 70 829 70 044 120 440 5
Asphalt cutter (parallel) 70 829 43 045 100 450 5
Forged plate incl. shank-end 70 829 95 038 200x200 380 15

Toyo THBB 50 / Takeuchi TKB-50

Moil point 70 820 01 048 - 480 5

Flat chisel (cross) 70 828 02 048 45 480 5

Moil point also suitable for THBB 71 / TKB 71

Toyo THBB 71 / Takeuchi TKB-71 / Dehaco DHB 75

Moil point 70 820 01 048 - 480 5

Flat chisel (cross) 70 820 02 048 45 480 5
Wide chisel (cross) 70 820 70 044 120 440 5
Asphalt cutter (parallel) 70 820 43 045 100 450 5
Forged plate incl. shank-end 70 820 95 045 200x200 450 15,5

Toyo THBB 101 / Takeuchi TKB-101 / Dehaco DHB 105 / DHB 165

Moil point 70 826 01 058 - 580 9,5

Flat chisel (cross) 70 826 02 058 57 580 9,5
Wide chisel (cross) 70 826 18 055 140 550 9,5
Asphalt cutter (parallel) 70 826 83 056 115 560 9,5
Forged plate incl. shank-end 70 826 95 055 200x200 550 20

Toyo THBB 301 / Takeuchi TKB-301 / Dehaco DHB 305

Moil point 70 825 01 074 - 740 19

Flat chisel (cross) 70 825 02 074 70 740 19
Wide chisel (cross) 70 825 34 069 150 690 19
Asphalt cutter (parallel) 70 825 65 072 150 720 19
Forged plate incl. shank-end 70 825 95 069 200x200 690 29

V 12.03 104
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Toyo / Takeuchi / Dehaco

Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Toyo THBB 401 / Takeuchi TKB 401 / Dehaco DHB 405

Moil point 70 822 01 090 - 900 30

Flat chisel (cross) 70 822 02 090 80 900 30
Wide chisel (cross) 70 822 22 086 180 860 30

Toyo THBB 801 / Takeuchi TKB 801 / Dehaco DHB 805

Moil point 70 824 01 100 - 1000 53

Flat chisel (cross) 70 824 02 100 100 1000 53

Toyo THBB 1101 / Takeuchi TKB 1101 / Dehaco DHB 1105

Moil point 70 830 01 115 - 1150 94,5

Flat chisel (cross) 70 830 02 115 120 1150 94,5
Blunt tool point 70 830 00 107 - 1070 94,5

Toyo THBB 1400 / Takeuchi TKB 1400

Moil point 70 823 01 120 - 1200 118

Flat chisel (cross) 70 823 02 120 140 1200 118
Blunt tool point 70 823 00 110 - 1100 118

Toyo THBB 1600 / Takeuchi TKB 1600 / Dehaco DHB 1605

Moil point 70 831 01 125 - 1250 127

Flat chisel (cross) 70 831 02 125 140 1250 127
Blunt tool point 70 831 00 117 - 1170 127

Toyo THBB 2000 / Takeuchi TKB 2000 / Dehaco DHB 2305

Moil point 70 827 01 135 - 1350 162

Flat chisel (cross) 70 827 02 135 150 1350 162
Blunt tool point 70 827 00 125 - 1250 162

105 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Vistarini (HPV)
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Vistarini VH 60

Moil point 70 780 01 041 - 410 3,5

Flat chisel (cross) 70 780 02 041 42 410 3,5
Wide chisel (cross) 70 780 70 036 120 360 3,5
Asphalt cutter (parallel) 70 780 43 038 100 380 3,5
Forged plate incl. shank-end 70 780 95 042 200x200 420 15,5

Vistarini VH 90 / VHX 90

Moil point 70 781 01 045 - 450 5

Flat chisel (cross) 70 781 02 045 45 450 5
Wide chisel (cross) 70 781 70 041 120 410 5
Asphalt cutter (parallel) 70 781 43 042 100 420 5
Forged plate incl. shank-end 70 781 95 047 200x200 470 16,5

Vistarini VH 120 / VHX 120

Moil point 70 950 01 051 - 510 6,5

Flat chisel (cross) 70 950 02 051 50 510 6,5
Wide chisel (cross) 70 950 18 048 140 480 6,5
Asphalt cutter (parallel) 70 950 83 049 115 490 6,5
Forged plate incl. shank-end 70 950 95 048 200x200 480 18

Vistarini VH 160 / VHX 200

Moil point 70 782 01 058 - 580 10,5

Flat chisel (cross) 70 782 02 058 57 580 10,5
Wide chisel (cross) 70 782 18 055 140 550 10,5
Asphalt cutter (parallel) 70 782 83 056 115 560 10,5
Forged plate incl. shank-end 70 782 95 055 200x200 550 21

Vistarini VHX 331

Moil point 70 783 01 054 - 540 12

Flat chisel (cross) 70 783 02 054 65 540 12
Wide chisel (cross) 70 783 34 049 150 490 12
Asphalt cutter (parallel) 70 783 69 051 130 510 12
Forged plate incl. shank-end 70 783 95 049 200x200 490 21,5

V 12.03 106
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Wimmer / MSB
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Wimmer W 115

70 439 ... on request

Wimmer W 220 / MSB MS 220H

70 440 ... on request

Wimmer W 275 / MSB MS 250H

70 447 ... on request

Wimmer W 330 / MSB MS 300H

70 441 ... on request

Wimmer W 440 / MSB MS 400H

70 442 ... on request

Wimmer W 550 / MSB MS 500H

70 443 ... on request

Wimmer W 660 / MSB MS 600H

70 444 ... on request

107 V 12.03
No liability for misprints. Subject to modification.
 Expert tip:
FORGED AND HARDENED THROUGHOUT
Reconditioning
FOR LONGER TOOL LIFE reduces your costs!

Wimmer / MSB
Hammer Manufacturer SOLIDA Blade approx. Length Weight
Hammer Model Part No. Size mm overall mm appr. kg

Wimmer W 770 / MSB MS 700H

70 445 ... on request

Wimmer W 880 / MSB MS 800H

70 446 ... on request

Wimmer W 990 / MSB MS 900H

70 448 ... on request

V 12.03 108
No liability for misprints. Subject to modification.