OWNER’S MANUAL

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

LAS350B (LAS350B, S35A1-W)

www.lg.com
 2 Getting Started

Safety Information CAUTION: Do not use high voltage products

around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.

1
CAUTION CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
RISK OF ELECTRIC SHOCK
DO NOT OPEN instructions.
Getting Started

Slots and openings in the cabinet are provided for

CAUTION: TO REDUCE THE RISK OF ELECTRIC
ventilation and to ensure reliable operation of the
SHOCK DO NOT REMOVE COVER (OR BACK) NO
product and to protect it from over heating. The
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
openings shall be never be blocked by placing
TO QUALIFIED SERVICE PERSONNEL.
the product on a bed, sofa, rug or other similar
This lightning flash with surface. This product shall not be placed in a built-
arrowhead symbol within an in installation such as a bookcase or rack unless
equilateral triangle is intended to proper ventilation is provided or the manufacturer’s
alert the user to the presence of instruction has been adhered to.
uninsulated dangerous voltage
within the product’s enclosure CAUTION concerning the Power Cord
that may be of sufficient
magnitude to constitute a risk of Most appliances recommend they be placed upon
electric shock to persons. a dedicated circuit;
That is, a single outlet circuit which powers only
The exclamation point within an
that appliance and has no additional outlets or
equilateral triangle is intended
branch circuits. Check the specification page of this
to alert the user to the presence
owner’s manual to be certain. Do not overload wall
of important operating and
outlets. Overloaded wall outlets, loose or damaged
maintenance (servicing)
wall outlets, extension cords, frayed power cords, or
instructions in the literature
damaged or cracked wire insulation are dangerous.
accompanying the product.
Any of these conditions could result in electric
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK shock or fire. Periodically examine the cord of your
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN appliance, and if its appearance indicates damage
OR MOISTURE. or deterioration, unplug it, discontinue use of the
CAUTION: The apparatus shall not be exposed to appliance, and have the cord replaced with an
water (dripping or splashing) and no objects filled exact replacement part by an authorized service
with liquids, such as vases, shall be placed on the center. Protect the power cord from physical or
apparatus. mechanical abuse, such as being twisted, kinked,
WARNING: Do not install this equipment in a pinched, closed in a door, or walked upon. Pay
confined space such as a book case or similar unit. particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible

NOTICE: For Product Identification and

Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
 Getting Started 3

This device is equipped with a portable battery or Disposal of waste batteries/accumulators

accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery
pack, follow the steps in reverse order than Pb 1
the assembly. To prevent contamination of the
1. This symbol may be combined with chemical

Getting Started
environment and bring on possible threat to
symbols for mercury(Hg), cadmium(Cd) or
human and animal health, the old battery or
lead(Pb) if the battery Contains more that
the battery put it in the appropriate container
0.0005% of mercury,0.002% of cadmium or
at designated collection points. Do not dispose
0.004% of lead.
of batteries or battery together with other
waste. It is recommended that you use local, 2. All batteries/accumulators should be disposed
free reimbursement systems batteries and separately from the municipal waste stream via
accumulators. The battery should not be exposed designated collection facilities appointed by the
to excessive heat such as sunshine, fire or the like. government or the local authorities.
3. The correct disposal of Your old batteries/
Disposal of your old appliance accumulators will help to prevent potential
1. All electrical and electronic products negative consequences for the environment,
should be disposed of separately animal and human health.
from the municipal waste stream 4. For more detailed information about disposal of
via designated collection facilities Your old batteries/accumulators, please contact
appointed by the government or the Your city office, waste disposal service or the
local authorities. shop where You purchased the product.
2. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
3. For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
 4 Getting Started

Declaration of Conformity POWER: This unit operates on a mains supply of

200 - 240V ~ , 50 / 60Hz
Wiring: This unit is supplied with a BS 1363
1 approved main plug. When replacing the fuse,
Hereby, LG Electronics European Shared Service
always use of the same rating approved to BS
Center B.V., declares that this Wireless Sound Bar
1362. Never use this plug with the fuse cover
Getting Started

is compliant with the essential requirements and

omitted. To obtain a replacement fuse cover
other relevant provisions of Directive 1999/5/EC.
contact your dealer. If the type of plug supplied
The complete Declaration of Conformity may be
is not suitable for the mains sockets in your
requested through the following postal address:
home, then the plug should be removed and
LG Electronics European Shared Service Center B.V. a suitable type fitted. Please refer to the wiring
European Standard Team instructions below:
Krijgsman 1
Warning: A mains plug removed from the mains
1186 DM Amstelveen
lead of this unit must be destroyed. A mains plug
The Netherlands
with bared wires is hazardous if inserted in a
or can be requested at our dedicated DoC website: mains socket. Do not connect either wire to the
http://www.lg.com/global/support/cedoc/cedoc# earth pin, marked with the letter E or with the
earth symbol or coloured green or green and
This device is a 2.4 GHz wideband transmission yellow. If any other plug is fitted, use same rating
system, intended for use in all EU member states of fuse in the plug.
and EFTA countries. Important: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may
not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
 Table of Contents 5

Table of Contents 20 –  Install “Music Flow Bluetooth” App

onto Your BLUETOOTH Device
21 – Activate BLUETOOTH with “Music
Flow Bluetooth” App
22 Sound adjustment 1
1 Getting Started 22 –  Setting sound effect
2 Safety Information 22 –  Adjust volume level automatically
6 Unique features 23 –  Adjust the Treble/Bass
6 Introduction 23 –  Adjust the woofer level settings
23 –  Night mode
2
6 –  Symbols used in this manual
6 Accessories
7 Remote control
4 Troubleshooting
8 Front panel
8 Rear panel 24 Troubleshooting
3
9 Installing the sound bar
9 –  Installing the cover
foot
5 Appendix
10 Mounting the main unit on a wall 26 Trademarks and licenses
27 Specifications 4
28 Maintenance
2 Connecting
28 –  Handling the unit
12 Connecting the subwoofer
12 –  Attaching the subwoofer to the unit
6 Warranty
12 Connecting to your TV 5
12 –  Using an OPTICAL cable 29 Warranty
13 Optional equipment connection
13 –  OPTICAL IN connection
13 –  PORTABLE IN connection
6
3 Operating
14 Operations
14 –  DRC (Dynamic Range Control)
14 –  Turn off the sound temporarily
14 –  AV Sync
14 –  Displaying input information
14 –  Sleep timer setting
14 –  Adjusting the brightness of the
display window
15 –  Using your TV remote control
16 –  AUTO POWER On/Off
16 –  Auto function change
17 –  LG Sound Sync
18 Using BLUETOOTH® technology
19 –  Listening to music stored on the
BLUETOOTH devices
20 Using BLUETOOTH App
 6 Getting Started

Unique features Accessories

Please check and identify the supplied accessories.
1 Auto power down Designs and specifications of the accessories are
This unit will turn off by itself for energy saving subject to change without prior notice.
Getting Started

consumption.

Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Remote control (1) Batteries (2)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

Wall bracket (2) Wall bracket install

guide (1)
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features. Screws (2) Cover foot (2)

>>Caution
Indicates cautions for preventing possible damages
from abuse.
 Getting Started 7

Remote control • • • • • • • • • • a • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF. / Switches
to the standby mode.
OPTICAL : Changes input source to OPTICAL.
1
VOL o/p : Adjusts speaker volume.

Getting Started
(Mute) : Mutes the sound.
: Adjusts sound level of Treble or Bass.
WOOFER LEVEL W/S : Adjusts sound level of
Sub-woofer.
h: Changes input source to Bluetooth.
LG TV : Changes input source to LG TV
PORT.IN : Changes input source to Portable.
• • • • • • • • • • b • • • • • • • • • •
SOUND EFFECT : Selects a sound effect mode.
AV SYNC : Synchronizes the audio and video.
A/D : Selects Sound Effects or adjusts AV sync.
(Night mode) : Turns on or off Night mode.
• • • • • • • • • • c • • • • • • • • • •
DRC : Turns on or off DRC function.
INFO :
- Displays the information of an input source and
Bluetooth address.
- Controls TV remote (Refer to the page 15)
SLEEP : Sets the system to turn off automatically at
a specified time.
Replacement of battery
AUTO VOLUME : Turns on and off the AUTO
VOLUME mode.
AUTO POWER : Turns on or off AUTO POWER
function. (Refer to the page 16.)
? : This button is not available.

Remove the battery cover on the rear of the

Remote Control, and insert two R03 (size AAA)
batteries with and matched correctly.
 8 Getting Started

Front panel

1
Getting Started

A Remote sensor C 1/! (Standby/On)

B Display window D F (Function)
Standby LED Selects the function and input source.
It lights up in red on standby mode. E p/o (Volume)
Adjusts volume level.

Rear panel

A Power cord C OPT. IN : Optical input

B SUB WOOFER(4Ω) Connector D PORT. IN : Portable input
 Getting Started 9

Installing the sound Installing the cover

foot
bar You can extend the height of the unit by using
cover foot (height : 17 mm) 1
You can hear the sound by connecting the unit to
the other device : TV, Blu-ray disc player, DVD player,

Getting Started
etc.
Place the unit in front of the TV and connect it to
the device you want. (Refer to pages 12 - 13.)

1. Turn the unit upside down.

2. Peel off a sticker attached to the cover foot.
Then place it on the existing foot of the unit.
3. Press the cover foot with adequate force to get
it firmly fixed.

How to Affix the Ferrite Core

(Optional)
You may need to attach Ferrite core in order to
reduce or eliminate any electrical interference.

>>Caution 1. Open
yy For best performance of wireless
connection such as Bluetooth,
do not install the unit on Metallic
furniture because wireless connection
communicates through a module
positioned on the bottom of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when 2. Wind (Twice)
installing or moving them.
yy Use caution when handling the Sub
Woofer. The speaker on the rear is
exposed. Avoid making contact with the
exposed speaker.

3. Close
 10 Getting Started

Mounting the main 1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach
unit on a wall to the position.

TV
1
You can mount the main unit on a wall.
Getting Started

2. When you mount it on a wall (concrete), use the

wall plugs. You should drill some holes. A guide
sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.
>>Caution
Because it is difficult to make a connection
after installing this unit, you should connect
the cables before installation.

Preparation materials
Unit

Wall bracket install guide

3. Remove the Wall bracket install guide.
Wall bracket

Screws

(Not supplied)
Screws (A)
Wall plug
 Getting Started 11

4. Fix the brackets with screws (A) as shown in the 6. Fix the unit with the screws firmly.
illustration below.

Getting Started
,,Note
To detach the unit, perform it in reverse order.
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti >>Caution
(HUD-1 6 x 30) for the mounting. yy Do not install this unit upside down. It can
damage the parts of this unit or be the
5. Put the unit on the brackets to match screw cause of personal injury.
holes on the bottom of the unit. yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
 12 Connecting

Connecting the Connecting to your TV

subwoofer
Using an OPTICAL cable
1. Connect the OPT. IN jack on the back of the
Attaching the subwoofer to unit to OPTICAL OUT jack on the TV using an
the unit OPTICAL cable.
To connect the cable to the unit, press each plastic
2 finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connecting

Connect the black wire to the terminals marked

- (minus) and the other end to the terminals(red
tube) marked + (plus). Optical
cable

2. Set the INPUT source to OPTICAL. Press

OPTICAL on the remote control or F on the unit
until the function is selected.
,,Note
yy Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
 Connecting 13

Optional equipment PORTABLE IN connection

connection

OPTICAL IN connection
Connect an optical output jack of external devices
to the OPTICAL IN jack.
2
MP3 player, etc...

Connecting
To the optical output jack of
external device
1. Connect the OPTICAL IN jack on the back of Listening to music from your
the unit to optical out jack of your TV (or digital portable player
device etc.)
The unit can be used to play the music from many
2. Select the input source to OPTICAL by pressing types of portable players or external devices.
OPTICAL on the remote control or F on the
unit until the function is selected. 1. Connect the portable player to the
PORTABLE IN connector of the unit by using 3.5
3. Listen to sound. mm stereo cable.

,,Note 2. Turn the power on by pressing 1 (Power).

Before connecting the optical cable, be sure to 3. Select the PORTABLE function by pressing
remove the protection plug cover if your cable PORT.IN on the remote control or F on the unit
has the cover. until the function is selected.
4. Turn on the portable player or external device
and start playing it.
 14 Operating

Operations Sleep timer setting

This unit will be turned off automatically by your
timer set.
DRC (Dynamic Range Control) Press SLEEP repeatedly to select the desired time
period options (in minutes):
Make the sound clear when the volume is turned
down and prevent sudden increase of sound DISPLAY OFF (display window will turns off ) ->
(Dolby Digital only). Set to [DRC ON] by using DRC. DIMMER (display window will be darkened by half )
-> Sleep timer value (180 ~ 10) -> Display on
To check the remaining time, press SLEEP.
Turn off the sound temporarily
To cancel the sleep function, press SLEEP
Press (Mute) to mute your unit. repeatedly until “SLEEP 10” appears, and then press
You can mute your unit, for example, to answer SLEEP once again while “SLEEP 10” is displayed.
the telephone, “MUTE” is displayed in the display ,,Note
3 window. You can check the remaining time before the
To cancel it, press (Mute) again on the remote unit turns off . Press SLEEP the remaining time
Operating

control or change the volume level. appears in the display window.

AV Sync Adjusting the brightness of

When receiving audio signals from TV, sound and
images may not be matched. In the case, this the display window
function can adjust the delay time. It helps you to watch TV without interruptions due
1. Press AV SYNC. to the light from the display window of this unit.
2. Use A/D to scroll up and down through the DISPLAY OFF
delay amount, which you can set at anything Select DISPLAY OFF to turn off the display window
between 0 and 300 ms. of this unit. If you input the buttons of the unit or
the remote control, display shows the status of the
unit and then turns off again after several seconds.
Displaying input information
DIMMER
You can display various information by pressing
INFO. Select DIMMER to dim the display window.

OPTICAL: Audio format, Audio channel

Bluetooth: Address of connected Bluetooth
device
 Operating 15

Using your TV remote control Auto power down

You can control some functions of this unit by This unit will be off itself to save electric
your TV remote control even by other company’s consumption in the case main unit is not
product. connected to external device and is not used for 20
Controllable functions are volume up/down and minutes.
mute. So does this unit after six hours since Main unit
Press and hold INFO on the remote control for has been connected to other device using analog
about 3 seconds. “ON - TV REMOTE” appears and input. (Ex : Portable, etc..)
you can control this unit by your TV remote control.
To check the status of this function, press and hold How to disconnect the wireless
INFO. network connection or the wireless
To turn off this function, press and hold INFO device
and press it once again while “ON - TV REMOTE” is
Set up the AUTO POWER ON/OFF function to off
scrolled.
and turn off the unit. 3
,,Note
yy Supported TV brands

Operating
LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio

yy Make sure that the sound output of your TV

is set to [External speaker].
yy Depending on the remote control, this
function may not work well.
yy This function may not work well when you
use LG Sound Sync.
 16 Operating

AUTO POWER On/Off Auto function change

This unit automatically turns on by an input source : This unit recognizes input signals such as optical,
Optical, LG TV or Bluetooth. Bluetooth and LG TV and then changes suitable
When you turn on your TV or an external device function automatically.
connected to this unit, this unit recognizes the
input signal and select the suitable function. You When optical signal comes in
can hear the sound from your device.
When you turn on the external device connected
If you try to connect your Bluetooth device, this to this unit by an optical cable, this unit change the
unit turns on and ready to pair. Connect your function to optical. You can hear the sound from
Bluetooth device and play your music. your device.
This function turns on or off each time you press
AUTO POWER. When you try to connect
,,Note BLUETOOTH device
3 yy After the unit is turned on by AUTO POWER When you try to connect your Bluetooth device to
function, it will be automatically turned off if this unit, Bluetooth function is selected. Play your
Operating

there is no signal for a certain period of time music on the Bluetooth device.
from the TV connected by LG Sound Sync
(Optical/Wireless).
When LG TV signal comes in
yy After the unit is turned on by AUTO POWER
When you turn on your LG TV connected by
function, it will be automatically turned off if
LG Sound Sync (Wireless connection), this unit
there is no signal for a certain period of time
changes the function to LG TV. You can hear the
from the external device.
sound from your TV.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER ,,Note
function. However the unit can be turned To change to optical function, it needs 5
on by AUTO POWER function when optical seconds of no signal.
signal comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy If you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to
connect to the unit continually. Therefore
it is recommended to disconnect the
connection before turn off the unit.
yy When you turn on this unit for the first time,
Auto Power function is turned on status.
 Operating 17

LG Sound Sync With wired connection

1. Connect your LG TV to the unit by using an
optical cable.

You can control some functions of this unit by

your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Optical
Controllable function by LG TV's remote control :
cable
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
3
on the capabilities of your equipment.
,,Note

Operating
2. Set up the sound output of TV to listen to the
sound through this unit :
yy You can also use the remote control of
this unit while using LG Sound Sync. If you TV setting menu [ [Sound] [ [TV Sound
use TV's remote control again, the unit output] [ [LG Sound Sync (Optical)]
synchronizes with the TV. 3. Turn on the unit by pressing 1 (Power) on the
remote control.
yy When the connection fails, make sure of the
condition of the TV and power. 4. Select OPTICAL function by using OPTICAL on
the remote control or F on the unit until the
yy Make sure of the condition of this unit and
the connection in the cases below when function is selected.
using LG Sound Sync. You can see "LG OPT" on the display window
-- Turn off the unit. if connecting normally between this unit and
your TV.
-- Changing the function to the others.
-- Disconnecting the optical cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV when you
set AUTO POWER function to ON.
yy Details of TV setting menu vary depending
on the models of your TV.
 18 Operating

With wireless connection Using BLUETOOTH®

1. Turn on the unit by pressing 1 (Power) on the
remote control. technology
2. Select LG TV function by using LG TV on
the remote control or F on the unit until the
function is selected. About BLUETOOTH
3. Set up the sound output of TV to listen to the Bluetooth is wireless communication technology
sound through this unit : for short range connection.
TV setting menu [ [Sound] [ [TV Sound
The sound may be interrupted when the
output] [ [LG Sound Sync (Wireless)]
connection interfered by the other electronic wave
"PAIRED" appears on the display window for or you connect the Bluetooth in the other rooms.
about 3 seconds and then you can see "LG TV"
Connecting individual devices under Bluetooth
on the display window if connecting normally
wireless technology does not incur any charges. A
between this unit and your TV.
mobile phone with Bluetooth wireless technology
3
,,Note can be operated via the Cascade if the connection
yy If you turned off the unit directly by pressing was made via Bluetooth wireless technology.
Operating

1 (Power), LG Sound Sync (Wireless) will Available Devices : Mobile phone, MP3, Laptop,
be disconnected. To use this function again, PDA etc.
you should reconnect the TV and the unit.
yy Details of TV setting menu vary depending BLUETOOTH Profiles
on the models of your TV.
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
 Operating 19

Listening to music stored on 3. When this unit is successfully connected

with your Bluetooth device, “PAIRED” will be
the BLUETOOTH devices appear on the display window and change to
Bluetooth device name soon.
Pairing your unit and BLUETOOTH ,,Note
device yy "PAIRED" will be momentarily appear on the
Before you start the pairing procedure, make display when you connect other devices for
sure the Bluetooth feature is turned on in to multi pairing.
your Bluetooth device. Refer to your Bluetooth yy If it is unavailable to display device name on
device’s user guide. Once a pairing operation is the unit, "_" will be displayed.
performed, it does not need to be performed again.
1. Select the Bluetooth function by using h on 4. Listen to music.
the remote control or F on the unit until the To play a music stored on your Bluetooth
function is selected. device, refer to your Bluetooth device’s user
Appears “BT” and then “BT READY” in display guide. 3
window.
,,Note

Operating
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit yy When using Bluetooth technology, you
with the Bluetooth device, a list of the devices have to make a connection between the
found may appear in the Bluetooth device unit and the Bluetooth device as close as
display depending on the type of Bluetooth possible and keep the distance.
device. Your unit appears as However it may not work well in the case
“LG LAS350B (XX)”. below :

,,Note -- There is a obstacle between the unit and

the Bluetooth device.
yy XX means the last two digits of
Bluetooth address. For example, if your -- There is a device using same frequency
unit has a Bluetooth address such as with Bluetooth technology such as a
9C:02:98:4A:F7:08, you will see medical equipment, a microwave or a
“LG LAS350B (08)” on your Bluetooth wireless LAN device.
device. yy You should connect your Bluetooth device
yy Depending on the Bluetooth device type, to this unit again when you restart it.
some device have a different pairing way. yy Even if this unit connected up to 3
Enter the PIN code (0000) as needed. Bluetooth devices, you can play and
yy You can connect this unit with up to 3 control music by using only one of the
Bluetooth device simultaneously same connected devices.
method as above description. yy When this unit connected with multiple
yy The multi pairing connection is only Bluetooth devices, only one device
supported on Android or iOS devices. (Multi which you are playing keeps Bluetooth
pairing connection may not be supported connection when you change the function
depending on the connected device to the others.
specifications.)
yy Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn't supported multi
pairing.
 20 Operating

,,Note Install “Music Flow Bluetooth”

yy The sound may be interrupted when
the connection interfered by the other
App onto Your BLUETOOTH
electronic wave. Device
yy You may not control the Bluetooth device There are two ways to install “Music Flow Bluetooth”
with this unit. App onto Your Bluetooth Device.
yy Depending on the type of the device, you
may not be able to use the Bluetooth Install “Music Flow Bluetooth” App
function.
through QR code
yy You can enjoy wireless system using phone,
1. Install “Music Flow Bluetooth” app through QR
MP3, Notebook, etc..
code. Use the scanning software to scan the QR
yy The more distance between the unit and code.
the Bluetooth device, the lower the sound
quality becomes.
3 yy Bluetooth connection will be disconnected
when the unit is turned off or the
Operating

Bluetooth device gets far from the unit.

yy When Bluetooth connection is
disconnected, connect the Bluetooth 2. Tap an icon for installation.
device to the unit again.
3. Tap an icon for downloading.
yy When not connected the Bluetooth, “BT
READY” appears on the display window. ,,Note
yy Make sure that your Bluetooth device is
yy When you connect Bluetooth device
connected to the Internet.
(iOS device etc.) to this unit or operate
the device, the volume level can be yy Make sure that your Bluetooth device has
synchronized with each other. a scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
Using BLUETOOTH yy Depending on area, QR code may not work.

App
,,Note
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.

About “Music Flow Bluetooth” App

“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
 Operating 21

Install “Music Flow Bluetooth” App ,,Note

through “Google Android Market yy “Music Flow Bluetooth ” app will be available
in the software version as follow;
(Google Play Store)”
-- Android O/S : Ver 4.0.3 (or later)
1. Tap the “Google Android Market (Google Play
Store)” icon. yy If you use “Music Flow Bluetooth ” app for
operation, there would be some differences
2. In the search bar, type in the “Music Flow
between “Music Flow Bluetooth ” app
Bluetooth” and search it.
and the supplied remote control. Use the
3. In the search result list, find and tap “Music Flow supplied remote control as necessary.
Bluetooth” to start downloading Bluetooth
yy Depending on the Bluetooth device,
app.
“Music Flow Bluetooth ” app may not work.
4. Tap an icon for installation.
yy After connection of “Music Flow Bluetooth”
5. Tap an icon for downloading. app, music may be output from your device.
,,Note In this case, try connecting procedure again.
3
yy Make sure that your Bluetooth device is yy If you operate the other applications or
connected to the Internet. change the settings on your Bluetooth

Operating
device while using “Music Flow Bluetooth
yy Make sure that your Bluetooth device is
” app, “Music Flow Bluetooth ” app may
equipped with “Google Android Market
operate abnormally.
(Google Play Store)”.
yy When “Music Flow Bluetooth ” app operates
abnormally, check your Bluetooth
device and the connection of “Music Flow
Activate BLUETOOTH with Bluetooth ” app and then try to connect
“Music Flow Bluetooth” App again.
“Music Flow Bluetooth” app helps to connect your yy Depending on the smart phone's operating
Bluetooth device to this unit. system, you have some differences for
“Music Flow Bluetooth ” operation.
1. Tap “Music Flow Bluetooth” app icon on the
home screen to open “Music Flow Bluetooth” yy Even though Bluetooth connection will
app, and go to the main menu. be disconnected, you can use “Music Flow
Bluetooth ” app when you change the
2. Tap [Menu] and select the unit you want.
function.
3. If you want to get more information to operate,
tap [Setting] and turn on the User guide.
 22 Operating

Sound adjustment Adjust volume level

automatically
This unit supports Auto volume function that
Setting sound effect automatically adjusts the volume level.
This system has a number of pre-set surround When the output sound is too loud or too low,
sound fields. You can select a desired sound mode press AUTO VOLUME on the remote control. So
by using SOUND EFFECT. you can enjoy the sound with appropriate levels.
Press SOUND EFFECT repeatedly or press SOUND To cancel this function, press the button again.
EFFECT and then, press A/D.
The displayed items for the equalizer may be
different depending on sound sources and effects.

On Display Description
3 You can enjoy optimized
STANDARD
sound.
Operating

You can enjoy comfortable

MUSIC
and natural sound.
You can enjoy more
CINEMA immersive and cinematic
surround sound.
FLAT Provides balanced sound.
Boosts the mid-range for
BOOST
sound reinforcement.
TRE / BASS Reinforces the treble and
(TREBLE / BASS) bass.

,,Note
yy In some of sound effect mode, some
speakers, there’s no sound or low sound.
It depends on the mode of sound and the
source of audio, it is not defective.
yy You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound file changed.
 Operating 23

Adjust the Treble/Bass

You can adjust the sound level of Treble, Bass as
your preference.
TREBLE/BASS : - 5 dB to 5 dB
1. Press button repeatedly to select TREBLE or
BASS
2. Press VOL o/p to adjust the sound level.

Adjust the woofer level

settings
You can adjust the sound level of woofer from - 20
dB to + 6 dB.
Press WOOFER LEVEL W or WOOFER LEVEL S to 3
adjust the sound level of the woofer.

Operating
Night mode
This function is useful when you want to watch
movies at low volume late at night.
Press button on the remote control. So you can
activate Night mode. To cancel it, press button
again.
 24 Troubleshooting

Troubleshooting
PROBLEM CAUSE & CORRECTION

yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not yy Disconnect the power cord of this unit and the connected external device (TV,
work properly. Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.

yy The power cord is unplugged.

No Power Plug in the power cord.
yy Check the condition by operating other electronic devices.

yy Incorrect input source is selected.

Check the input source and select the correct input source.
yy The mute function is activated.
No sound Press (Mute) or adjust the volume level to cancel the mute function.
4 yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
Troubleshooting

No woofer sound yy Connect the unit and the subwoofer. (Refer to the page 12)

yy The DISPLAY OFF function is activated.

No display Press SLEEP repeatedly to cancel the function. (Refer to the page 14)

yy The remote control is too far from the unit.

Operate the remote control within about 7 m.
The remote control yy There is an obstacle in the path of the remote control and the unit.
does not work Remove the obstacle.
properly.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.

The AUTO POWER yy Check connection of the external device such as TV, DVD/Blu-Ray player or
function does not Bluetooth device.
work. yy Depending on the connected device, this function may not operate.

yy Check whether your LG TV supports LG Sound Sync.

LG Sound Sync does yy Check connection of LG Sound Sync (Optical or wireless).
not work.
yy Check sound setting of your TV and this unit.
 Troubleshooting 25

PROBLEM CAUSE & CORRECTION

Check the details below and adjust the unit according to them.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting
When you feel the on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
output sound of the
unit is low. yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.

Troubleshooting
 26 Appendix

Trademarks and
licenses
All other trademarks are trademarks of their
respective owners.
Bluetooth® wireless technology is a system
which allows radio contact between electronic.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade
if the connection was made via Bluetooth®
wireless technology.
The Bluetooth® word mark and logos are owned
Manufactured under license from Dolby by the Bluetooth® SIG, Inc. and any use of such
Laboratories. Dolby and the double-D symbol marks by LG Electronics is under license.
are trademarks of Dolby Laboratories.
Other trademarks and trade names are those of
their respective owners.

5
For DTS patents, see http://patents.dts.com.
Appendix

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
 Appendix 27

Specifications
General (LAS350B)
Power requirements Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D) 880 mm x 59 mm x 90 mm
Net Weight (Approx.) 1.9 kg
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %

Input/Output
OPT. IN 3 V (p-p), Optical jack x 1
PORT. IN 0.5 Vrms (3.5 mm stereo jack) x 1
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Sampling Frequency

Amplifier
Total 120 W
Front 25 W x 2 (6 Ω at 1 kHz) 5
Subwoofer 70 W (4 Ω at 100 Hz)

Appendix
THD 10 %

Subwoofer (S35A1-W)
Type 1 Way 1 Speaker
Impedance 4Ω
Rated Input Power 70 W
Max. Input Power 140 W
Dimensions (W x H x D) 156 mm x 300 mm x 288 mm
Net Weight (Approx.) 2.9 kg

Bluetooth
Codec SBC

yy Designs and specifications are subject to change without prior notice.

 28 Appendix

Maintenance

Handling the unit

When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.

Keeping the exterior surfaces clean

yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
5 use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
Appendix

unit.
 Warranty 29

Technology with the human touch

GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12
months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of
this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made in
accordance with the published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the
apparatus, or if non standard components are used or if the serial number of the apparatus is removed, defaced,
misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally
purchased. The dealer may, before carrying out service under guarantee, require a receipted account as evidence of
the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in
use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG
to assist you in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
6

Warranty
MODEL NO.* SERIAL NO.* DATE OF PURCHASE.*

In all cases of difficulty - consult your LG dealer from whom the product was purchased

LGEUK Website : www.lg.com/uk

(Service website : www.lg.com/uk/support)