Preparations

Quick Start Guide Note: Please follow the steps described below.
Electronic Cash Register SR-S500/SR-C550
2. Ensuring the paper is being fed from the bottom of the 3. To turn the cash register on
roll, lower the roll into the space behind the printer.
Electronic Cash Register can
1. Insert a Mode key that comes with the cash register in
be set by Smartphone Try it ! http://web.casio.com/ecr/app/ the Mode switch and turn it to OFF position.

Preparations
Note: Please follow the steps described below.

PG
M
1. To set memory protection bat- 4. Replace the battery compartment cover.
3. Put the leading end of the paper over the printer.
teries Important:
These batteries protect information stored in your
To prevent losing all your settings and sales data, we cash register’s memory when there is a power
failure or when you unplug the cash register. Be
2. Plug in the power cord into an AC outlet.
strongly recommend that you set the memory protection
batteries before you use the cash register and replace sure to install these batteries first.
them at least once a year. Warning:
No battery is included in the accessories.
1. Remove the printer cover by lifting it up.
Never try to recharge the batteries.

Do not expose batteries to direct heat, let them 4. Close the platen arm slowly until it locks securely.
become shorted or try to take them apart. Please push the position marked [PUSH HERE].
Keep batteries out of the reach of small children. Warning:
If your child should swallow a battery, consult a Never touch the printer’s thermal head and the
physician immediately. platen.
There is a risk of explosion if the batteries are Avoid the thermal paper from heat, humidity or
replaced with improper type. direct sunlight.
2. Remove the battery compartment cover. Keep your hands off the paper cutter to avoid injury.
2. To set a paper roll platen platen arm
The following explains for setting roll paper used as
receipts. If you wish to use the paper roll for journal (sales
record), please see page E-17 of the user’s manual.

1. Open the platen arm by lifting it up. thermal head paper cutter

3. Note the (+) and (–) markings in the battery compart- 5. Replace the printer cover, passing the leading end of
ment. Load a set of two new “AA” type alkaline
the paper through the cutter slot. Tear off the excess
batteries so that their plus (+) and minus (–) ends are
paper.
facing as indicated by the markings.

QSG240*E2
 Preparations Getting to know your cash
Note: Please follow the steps described below. register

4. To set the language (country), The followings are operation examples for inputting tax 8. On the smartphone, find paired cash register’s device Mode switch
rates. code. Operations differ between Android and iPhone.
date, time, tax rates and Blue- <Android>
tooth pairing 3. Display then changes to tax table setting screen. On Android Bluetooth setting, find and select the
Using ten key pad, input tax rates. You can set four device code of the cash register shown on the dis-
kinds of tax rates. play. In this example, EY123456789012.
1. As soon as the power socket is plugged in, the <iPhone>
display shows the language selection display. Choose PLEASE INPUT TAX RATE.
<CA/AMT TEND> :ENTER Starting “CASIO ECR+”, smartphone searches
language and country by using ? >
or keys then target cash register. In this example, select
press F key. EY123456789012.
PLEASE SELECT LANGUAGE. Rate Note that the device code differs depending on each cash
Tax1 [ 3] register. Make sure to select the same code shown on the Mode switch
<CA/AMT TEND> :SELECT
Tax2 [ 5.25] cash register display.
Tax3 [ 8.5]
Tax4 [ 15] 9. After you select the device code on the smartphone,
English the cash register then shows a pass key on the PGM OP
English(Australia)
English(India)
4. Press F key. display. Enter the pass key (in this example, 123456)
English(Malaysia)
English(New Zealand) 5. Access the following URL and install “CASIO ECR+” on the smartphone. Pass key differs depending on
each cash register.
on a smartphone.
Notes:
Actual display shows characters in white on blue
http://web.casio.com/ecr/app/ Enter pass key on your Program key Operator key
mobile.
background.
The program key can be used to set the mode switch to
Selectable languages and countries depend on the any position, while the operator key can select the REG
123456
and OFF position.
cash register model.
6. As the cash register and a smartphone are connected
2. Display changes to date and time setting display. by Bluetooth, select [YES] on cash register display. PGM RF OFF REG X Z X2/Z2
If you do not wish to pair, select [NO]. Later, you can
Moving the input area (reversed area) by ? >
or
change this setting on Bluetooth setting screen in
OP key - - ¡ ¡ - - -
keys, input date, month, year and time from ten key PGM key ¡ ¡ ¡ ¡ ¡ ¡ ¡
PGM mode. If you select [NO], the setting is termi- If the cash register and a smartphone cannot be paired,
pad. Input the time by 24 - hour system. For example,
nated. check the cash register display. When the display indicates
1356 for 1:56 pm. After then press F key. that pairing is failed, select [RETRY] and perform the
1 PGM (Programming)
PLEASE INPUT DATE & TIME. Do you want to connect pairing again.
mobile via Bluetooth? This position is for setting your cash register to suit the
<CA/AMT TEND> :ENTER needs of your store.
<SUBTOTAL> :RETURN Failed to pair with
<CA/AMT TEND> :ENTER mobile device
[YES ] 2 RF (Refund)
DATE [DD] [NO ]
MONTH [MM] [EXIT ] Use this position to correct registered items.
YEAR 20[YY] [RETRY ]
TIME(24 HOUR) [HHMM] 3 OFF
The cash register turns off in this position.
The following are the procedures when you select [YES].
Depending on the language and country you 4 REG (Register)
selected, the cash register may asks if you use tax 7. Pair the cash register and a smartphone. Locate a A sound notifies that the pairing is completed. Now your This position is for normal transactions.
system/GST or rounding system. Please follow the smartphone within 1 meter from the cash register. cash register and your smartphone are paired by Bluetooth
instructions shown on the display. When the cash register display shows 14-digit code connection. 5 X (Read)
This is the position used for issuing daily sales totals
starting “EY”, prepare “CASIO ECR+” installed smart-
phone and turn Bluetooth setting of the smartphone
10. Cash register settings are completed. Succes- report without clearing the data.
sively, set up “CASIO ECR+” on the smartphone.
on. For Bluetooth settings, please refer to smartphone 6 Z (Reset)
iPhone users can continue settings by following the
instruction manual. This position is for issuing reports of daily totals with
instructions on the screen. For Android users, start
clearing the accumulated totals.
Activate Bluetooth on “CASIO ECR+” first.
mobile and select below 7 X2/Z2
device on the mobile.
Cancel <SUBTOTAL> This position is used to print periodic sales reports.

EY123456789012

• Android is a trade mark and registered trade mark of Google LLC.