Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Instruction: 4 Lectures & 1 Tutorial / Week Sessional Marks: 40 End Exam: 3 Hours End Exam Marks: 60

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

FLUID MECHANICS - II

CIV 315 Credits: 4


Instruction: 4 Lectures & 1 Tutorial / week Sessional Marks: 40
End Exam: 3 Hours End Exam Marks: 60

Prerequisites:
Engineering Mechanics; Fluid Mechanics - I

Course objectives:
1. To understand the design philosophy of turbines and pumps
2. To understand the fundamental concept for methods of dimensional analysis
3. To know the design used for supplying water and generating power

Course outcomes:
At the end of the course, the students will be able to:
1. Apply the principles of modeling pumps, turbines, propellers etc using various
dimensionless numbers
2. Determine discharge and design most economical channel section for uniform flow in
open channels
3. Use momentum and energy principles for design of turbines and pumps
4. Recommend suitable type of turbines and pumps for the given project.

Mapping of course outcomes with program outcomes:


PO PSO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 2 1 1 2 1
2 1 2 3 1 1 1 2 1
CO
3 1 2 3 1 1 2 1
4 2 2 2 2 1 2 2

SYLLABUS
UNIT – I 14 Periods
Dimensional Analysis and Similitude: Dimensional Homogeneity - Methods of Dimensional
Analysis – Rayleigh’s Method – Buckingham’s π theorem – Superfluous and Omitted
Variables - Similitude – Model Analysis – Dimensionless numbers – Similarity Laws – Model
testing of partially submerged bodies – Types of models.
Boundary Layer Theory: Introduction – characteristics of laminar boundary layer – boundary
layer growth over a flat plate (without pressure gradient) – Boundary thicknesses – Stability
parameter – Turbulent boundary layer – boundary layer separation – Boundary layer on rough
surfaces – laminar sublayer.
UNIT – II 14 Periods
Flow past submerged bodies: Introduction – Types of Drag – Drag on a sphere – Drag on a
cylinder – Von Karman Vortex Trail – Drag on a flat plate – Development of Lift on immersed
circular cylinder – Magnus effect.
Impact of Jets: Impulse momentum equation – Momentum Correction factor, Force on
Stationary flat plate – moving flat plate - Force on Stationary curved vanes – moving curved
vanes.

UNIT – III 14 Periods


Hydraulic Turbines: Introduction - Classification based on Head, Discharge, Hydraulic
Action – Impulse and Reaction Turbines, Differences between Impulse and Reaction Turbine,
Choice of Type of Turbine, Component Parts & Working principle of a Pelton Turbine, Francis
Turbine - Velocity Triangles - Hydraulic and Overall efficiencies.
Performance of turbines: Performance under Unit head, power and speed – Performance
under specific conditions - Specific Speed and its importance. Performance Characteristic
Curves – Operating Characteristic Curves – Cavitation - Draft Tube.

UNIT – IV 18 Periods
Centrifugal Pumps: Types of Pumps – Selection Criterion – Comparison between Centrifugal
& Reciprocating Pumps - Centrifugal Pumps – Component Parts & Working Principle –
Classification of Centrifugal pumps - Cavitation – Maximum Suction lift – NPSH. Specific
Speed of pumps – Performance Characteristics of Centrifugal Pumps – Dimensionless
characteristics – Constant efficiency curves of Centrifugal Pumps
Reciprocating Pumps: Component Parts – Working Principle of single acting and double
acting reciprocating pumps – Discharge Co-efficient, Volumetric efficiency and Slip. Work
done and Power Input – Indicator Diagram, Effect of acceleration and friction on Indicator
Diagram - Air Vessels.

UNIT – V 15 Periods
Flow through Open Channels: Classification of open channels, Uniform Flow: Chezy’s and
Manning’s formula, Hydraulic mean depth, hydraulic radius. Most economical trapezoidal and
rectangular channel section – Specific energy, Critical Flow.
Steady Rapidly Varied Flow: Hydraulic Jump in a horizontal rectangular channel, Specific
force Computation of energy loss.

TEXT BOOKS
1. Modi, P.N. & Seth, S.M. (2009), “Fluid Mechanics and Hydraulic Machinery”,
Standard Book House, New Delhi, 19th Edition.
2. Jain, A.K. (2008), “Fluid Mechanics”, Khanna Publishers, New Delhi, 4th Edition.

REFERENCES
1. Kumar, K.L., Chand, S. & Co. (2008), “Engineering Fluid Mechanics”, Eurasia
Publishing House (P) Ltd, New Delhi, 8th Edition.
2. Subramanya, K. (2008), “Flow in Open Channels”, McGraw Hill Education, New
Delhi, 3rd Edition.
3. Chow, V.T. (2009), “Open-Channel Hydraulics”, The Blackburn Press, Caldwell, NJ
USA, 1st Edition
4. White, F. M. (2011) “Fluid Mechanics”, Tata McGraw Hill Publication, New Delhi, 7th
Edition.
5. Relevant NPTEL Courses.

You might also like