0.05∼1,299.

99995MHz All Mode

Wide Band Communications Receiver

DJ-X11
2VFO simultaneous RX
Main-band coverage: 0.05∼1,299.99995MHz all mode
AM/FM/WFM/SSB/CW (BFO receive, not filtered)
Receives short-wave! (An external antenna required for
practical monitoring.)

SMA antenna connector Sub-band coverage: VHF:118∼171MHz/UHF:336∼

470MHz in AM/NFM
1200 memory channels with adjustable memory banks
IQ signal and IF output features: DJ-X11 has an IQ signal
output that can be used with 3rd-party software
(freeware) to operate as a software defined radio.
Receives short-wave
10.7MHz IF signals can be used with other receiver-
related software available on the internet.

Quick-release belt clip

Large function
Alinco’ s patented ChannelScope Easy-to-use twin dial operation & monitor keys
checks signals on nearby
frequencies for both bands

User-friendly icons DC
input jack

Large illuminated
Long-lasting
keypad & screen for easy operations
1800mAh
Li-Ion battery pack

Optional ERW-8 enables PC-friendly signal outputs including

the use of both clone-utility IQ and detection circuit.
AND real-time control
software.
Internal bar-antenna
Rugged poly-carbonate body with rubber protectors
WIDE BAND COMMUNICATIONS RECEIVER Caution

DJ-X11 Restrictions may apply to receive communications such as public-safety, air-band

etc. in some countries.
Please consult with the local authority before operating these products.
Cellular frequencies blocked on T model sold in USA, unblocked model available in
Canada and for authorized US users with proper documentation.
INCORPORATED
T: E/EGR: Simple-Clean-Dependable

Listen to the world with this pocket-size multi-mode receiver!

Features Optional accessories
Receives FM/WFM/AM/SSB/CW using SMA antenna with internal bar EBP-74 : Li-Ion battery pack for spare
EDC-174 : Drop-in charger stand for spare
antenna for AM broadcast band reception EDC-139 : AC adapter (T/120V) for spare
Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x EDC-140 : AC adapter (E/230V) for spare
4.17 (H) x 1.50 (D) in (without projections) EDC-141 : AC adapter (UK-plug/230V) for spare
EDH-33 : Cigar-plug DC conversion cable (12Vdc/24Vdc to 6Vdc)
Selectable tuning steps: EDH-36 : Dry cell case (3 AA cells) for spare
0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz EDS-12 : Wire Remote-controller
Various scan modes: Preset, programmed, memory, VFO and tone scan EME-26 : Curly-cord Earphones
EME-6 : Straight-cord Earphones
TSQ and DCS decode
ERW-8 : Mini USB/USB ports PC interface cable (Full-functions)
Wire remote-control using optional EDS-12 ESC-50 : Softcase
Long-lasting 1800mAh Li-Ion battery pack provides nearly 15 hours of ( ERW-7 USB port PC interface cable can be used for clone-utility only. )

operation at full audio output in a single RX mode Specifications

1200 Alphanumeric (up to 16 characters)memory channels with six ■General
types of memory banks; banks can be expanded up to 50 banks by Main VFO 0.05∼1299.99995 MHz All-modes
using free, downloadable software Sub VFO 118∼170.995MHz & 336∼469.995MHz AM/FM
Receiving range Note: 824∼850MHz, 869∼895MHz blocked on T models.
100 memory channels are available for each Dual-mode memory,
EGR version receives only broadcasts and Ham bands.
Search-pass, Priority monitoring and Programmed Scanning pairs
225∼335.995 MHz in AM/FM may be usable although off-specification
Large, illuminated full dot-matrix LCD Modulation mode FM,WFM,AM,SSB(USB/LSB),CW(CU/CL)
Illuminated keypad for comfortable operation Ant.impedance 50 ohm (SMA)
Standard Drop-in charger fully charges empty EBP-74 in 4 hours DC 3.7V (EBP-74) / DC 4.5V (EDH-33)
Supply voltage
DC 5.4V∼6.0V (external regulated source) negative ground
RF gain and attenuator for both main/sub VFOs
Current consumption approx.130mA Monoband / 180mA Dualband
Frequency counter and flash tune Temperature range -10 to +60℃ ( +14∼+140°
F)
“Bug detector” function searches for hidden transmitters Frequency stability -7 to +3ppm
Three selectable scan speeds Dimensions
61 (W) x 106 (H) x 38 (D) mm
2.4 (W) x 4.17 (H) x 1.50 (D) in (without projections)
Clone function
Weight Approx.235g / 8.29 oz (Ant.& EBP-74 inclusive)

PC connections ■Receiver
ERW-7 allows you to use clone or utility software only. Triple-conversion super heterodyne AM/SSB/CW/FM in Main VFO
System
ERW-8 enables the use of both clone-utility AND real-time control Double-conversion super heterodyne AM/FM in Sub VFO and WFM in Main VFO
software. SSB/CW -6dB : 2kHz or more -50dB : 7.5kHz or less
Both types of software are available for download at no charge Selectivity AM/FM -6dB : 12kHz or more -60dB : 35kHz or less
through www.alinco.com. To use 3rd party SDR freeware, you will WFM -6dB : 180kHz ±40kHz -20dB : 470kHz or less
need to purchase a 3.5mm stereo mini-plug cable for connection to a Audio output power more than 100mW (8ohm 10%THD)

PC. Functions are not guaranteed when used with 3rd party software. Sensitivities (typical value 10dB S/N:AM/SSB/CW 12dBSINAD:FM/WFM)
(ERW-4C serial cable is usable as a replacement to ERW-7 but it doesn't Main-band: Sub-band:
support firmware-update operations of DJ-X11.) 0.050∼0.531MHz（ AM ） 5dBμ 118∼136MHz（ AM ） -3dBμ
0.531∼1.62MHz（ AM ） 2dBμ 136∼170MHz（ FM ） -14dBμ
1.62∼76MHz（ AM ） -5dBμ 336∼470MHz（ FM ） -14dBμ
Indicative Battery dulation 1.62∼76MHz（ SSB,CW ） -10dBμ
* FM, single VFO, AF10% THD, 1 min RX/4 min Stand-by 1.62∼76MHz（ FM ） -15dBμ ●225∼335.995 MHz in AM/FM
76∼108MHz（ WFM ） -3dBμ may be usable although
EDH-36 (with Alkaline cells) or EBP-74 : Approx. 35 hours 108∼136MHz（ AM ） -6dBμ off-specification. Sensitivity is better
* FM, single VFO, Max AF output 136∼174MHz（ FM ） -14dBμ closer to 336MHz. This band is
closed at the default setting,
175∼221.75MHz（ WFM ） -6dBμ
EBP-74 : Approx. 15 hours
221.8∼336MHz（ AM ） 0dBμ
336∼475.75MHz（ FM ） -13dBμ
Standard accessories 475.75∼770MHz（ WFM ） -13dBμ
Instruction manual / Whip antenna (EA-154) / Li-Ion 770∼1260MHz（ FM ） -9dBμ
1260∼1300MHz（ FM ） -6dBμ
battery-pack (EBP-74 :1800mAh, 3.7V) / Belt-clip
(EBC-23) / Handstrap / Drop-in charger kit EDC-174A
* Specifications subject to change without notice or obligation. Cellular frequencies
(120V) or EDC-174E (220V) / Dry cell case (EDH-36) blocked on USA model. Unblocked K-version available with proper documentation for
* May vary, please ask your dealer before purchase. authorized users only.

Authorized Dealer: Copyright Alinco Incorporated, Osaka, Japan. All rights reserved.
Although Alinco has designed this brochure to be as comprehensive and
accurate as possible,we reserve the right to make changes at any time to our
equipment line, optional accessories,specifications,or availability of any such
device we manufacture and distribute. Please note that certain products and
accessories may not be available in all countries of distribution. Please consult
your Authorized Alinco Dealer for product availability and pricing.

ALINCO, INC. Electronics Division

Yodoyabashi Dai-Bldg 13F, 4-4-9 Koraibashi,
Chuo-ku, Osaka 541-0043 Japan
Phone: 06-7636−2362 Fax: 06-6208−3802
http://www.ALINCO.com
E-mail: export@alinco.co.jp

FNFNENNG-SP
Ver.1.0DJX11